| USING VFAT |
| ---------------------------------------------------------------------- |
| To use the vfat filesystem, use the filesystem type 'vfat'. i.e. |
| mount -t vfat /dev/fd0 /mnt |
| |
| No special partition formatter is required. mkdosfs will work fine |
| if you want to format from within Linux. |
| |
| VFAT MOUNT OPTIONS |
| ---------------------------------------------------------------------- |
| uid=### -- Set the owner of all files on this filesystem. |
| The default is the uid of current process. |
| |
| gid=### -- Set the group of all files on this filesystem. |
| The default is the gid of current process. |
| |
| umask=### -- The permission mask (for files and directories, see umask(1)). |
| The default is the umask of current process. |
| |
| dmask=### -- The permission mask for the directory. |
| The default is the umask of current process. |
| |
| fmask=### -- The permission mask for files. |
| The default is the umask of current process. |
| |
| allow_utime=### -- This option controls the permission check of mtime/atime. |
| |
| 20 - If current process is in group of file's group ID, |
| you can change timestamp. |
| 2 - Other users can change timestamp. |
| |
| The default is set from `dmask' option. (If the directory is |
| writable, utime(2) is also allowed. I.e. ~dmask & 022) |
| |
| Normally utime(2) checks current process is owner of |
| the file, or it has CAP_FOWNER capability. But FAT |
| filesystem doesn't have uid/gid on disk, so normal |
| check is too unflexible. With this option you can |
| relax it. |
| |
| codepage=### -- Sets the codepage number for converting to shortname |
| characters on FAT filesystem. |
| By default, FAT_DEFAULT_CODEPAGE setting is used. |
| |
| iocharset=<name> -- Character set to use for converting between the |
| encoding is used for user visible filename and 16 bit |
| Unicode characters. Long filenames are stored on disk |
| in Unicode format, but Unix for the most part doesn't |
| know how to deal with Unicode. |
| By default, FAT_DEFAULT_IOCHARSET setting is used. |
| |
| There is also an option of doing UTF-8 translations |
| with the utf8 option. |
| |
| NOTE: "iocharset=utf8" is not recommended. If unsure, |
| you should consider the following option instead. |
| |
| utf8=<bool> -- UTF-8 is the filesystem safe version of Unicode that |
| is used by the console. It can be enabled for the |
| filesystem with this option. If 'uni_xlate' gets set, |
| UTF-8 gets disabled. |
| |
| uni_xlate=<bool> -- Translate unhandled Unicode characters to special |
| escaped sequences. This would let you backup and |
| restore filenames that are created with any Unicode |
| characters. Until Linux supports Unicode for real, |
| this gives you an alternative. Without this option, |
| a '?' is used when no translation is possible. The |
| escape character is ':' because it is otherwise |
| illegal on the vfat filesystem. The escape sequence |
| that gets used is ':' and the four digits of hexadecimal |
| unicode. |
| |
| nonumtail=<bool> -- When creating 8.3 aliases, normally the alias will |
| end in '~1' or tilde followed by some number. If this |
| option is set, then if the filename is |
| "longfilename.txt" and "longfile.txt" does not |
| currently exist in the directory, 'longfile.txt' will |
| be the short alias instead of 'longfi~1.txt'. |
| |
| usefree -- Use the "free clusters" value stored on FSINFO. It'll |
| be used to determine number of free clusters without |
| scanning disk. But it's not used by default, because |
| recent Windows don't update it correctly in some |
| case. If you are sure the "free clusters" on FSINFO is |
| correct, by this option you can avoid scanning disk. |
| |
| quiet -- Stops printing certain warning messages. |
| |
| check=s|r|n -- Case sensitivity checking setting. |
| s: strict, case sensitive |
| r: relaxed, case insensitive |
| n: normal, default setting, currently case insensitive |
| |
| nocase -- This was deprecated for vfat. Use shortname=win95 instead. |
| |
| shortname=lower|win95|winnt|mixed |
| -- Shortname display/create setting. |
| lower: convert to lowercase for display, |
| emulate the Windows 95 rule for create. |
| win95: emulate the Windows 95 rule for display/create. |
| winnt: emulate the Windows NT rule for display/create. |
| mixed: emulate the Windows NT rule for display, |
| emulate the Windows 95 rule for create. |
| Default setting is `lower'. |
| |
| tz=UTC -- Interpret timestamps as UTC rather than local time. |
| This option disables the conversion of timestamps |
| between local time (as used by Windows on FAT) and UTC |
| (which Linux uses internally). This is particularly |
| useful when mounting devices (like digital cameras) |
| that are set to UTC in order to avoid the pitfalls of |
| local time. |
| |
| showexec -- If set, the execute permission bits of the file will be |
| allowed only if the extension part of the name is .EXE, |
| .COM, or .BAT. Not set by default. |
| |
| debug -- Can be set, but unused by the current implementation. |
| |
| sys_immutable -- If set, ATTR_SYS attribute on FAT is handled as |
| IMMUTABLE flag on Linux. Not set by default. |
| |
| flush -- If set, the filesystem will try to flush to disk more |
| early than normal. Not set by default. |
| |
| rodir -- FAT has the ATTR_RO (read-only) attribute. On Windows, |
| the ATTR_RO of the directory will just be ignored, |
| and is used only by applications as a flag (e.g. it's set |
| for the customized folder). |
| |
| If you want to use ATTR_RO as read-only flag even for |
| the directory, set this option. |
| |
| <bool>: 0,1,yes,no,true,false |
| |
| TODO |
| ---------------------------------------------------------------------- |
| * Need to get rid of the raw scanning stuff. Instead, always use |
| a get next directory entry approach. The only thing left that uses |
| raw scanning is the directory renaming code. |
| |
| |
| POSSIBLE PROBLEMS |
| ---------------------------------------------------------------------- |
| * vfat_valid_longname does not properly checked reserved names. |
| * When a volume name is the same as a directory name in the root |
| directory of the filesystem, the directory name sometimes shows |
| up as an empty file. |
| * autoconv option does not work correctly. |
| |
| BUG REPORTS |
| ---------------------------------------------------------------------- |
| If you have trouble with the VFAT filesystem, mail bug reports to |
| chaffee@bmrc.cs.berkeley.edu. Please specify the filename |
| and the operation that gave you trouble. |
| |
| TEST SUITE |
| ---------------------------------------------------------------------- |
| If you plan to make any modifications to the vfat filesystem, please |
| get the test suite that comes with the vfat distribution at |
| |
| http://bmrc.berkeley.edu/people/chaffee/vfat.html |
| |
| This tests quite a few parts of the vfat filesystem and additional |
| tests for new features or untested features would be appreciated. |
| |
| NOTES ON THE STRUCTURE OF THE VFAT FILESYSTEM |
| ---------------------------------------------------------------------- |
| (This documentation was provided by Galen C. Hunt <gchunt@cs.rochester.edu> |
| and lightly annotated by Gordon Chaffee). |
| |
| This document presents a very rough, technical overview of my |
| knowledge of the extended FAT file system used in Windows NT 3.5 and |
| Windows 95. I don't guarantee that any of the following is correct, |
| but it appears to be so. |
| |
| The extended FAT file system is almost identical to the FAT |
| file system used in DOS versions up to and including 6.223410239847 |
| :-). The significant change has been the addition of long file names. |
| These names support up to 255 characters including spaces and lower |
| case characters as opposed to the traditional 8.3 short names. |
| |
| Here is the description of the traditional FAT entry in the current |
| Windows 95 filesystem: |
| |
| struct directory { // Short 8.3 names |
| unsigned char name[8]; // file name |
| unsigned char ext[3]; // file extension |
| unsigned char attr; // attribute byte |
| unsigned char lcase; // Case for base and extension |
| unsigned char ctime_ms; // Creation time, milliseconds |
| unsigned char ctime[2]; // Creation time |
| unsigned char cdate[2]; // Creation date |
| unsigned char adate[2]; // Last access date |
| unsigned char reserved[2]; // reserved values (ignored) |
| unsigned char time[2]; // time stamp |
| unsigned char date[2]; // date stamp |
| unsigned char start[2]; // starting cluster number |
| unsigned char size[4]; // size of the file |
| }; |
| |
| The lcase field specifies if the base and/or the extension of an 8.3 |
| name should be capitalized. This field does not seem to be used by |
| Windows 95 but it is used by Windows NT. The case of filenames is not |
| completely compatible from Windows NT to Windows 95. It is not completely |
| compatible in the reverse direction, however. Filenames that fit in |
| the 8.3 namespace and are written on Windows NT to be lowercase will |
| show up as uppercase on Windows 95. |
| |
| Note that the "start" and "size" values are actually little |
| endian integer values. The descriptions of the fields in this |
| structure are public knowledge and can be found elsewhere. |
| |
| With the extended FAT system, Microsoft has inserted extra |
| directory entries for any files with extended names. (Any name which |
| legally fits within the old 8.3 encoding scheme does not have extra |
| entries.) I call these extra entries slots. Basically, a slot is a |
| specially formatted directory entry which holds up to 13 characters of |
| a file's extended name. Think of slots as additional labeling for the |
| directory entry of the file to which they correspond. Microsoft |
| prefers to refer to the 8.3 entry for a file as its alias and the |
| extended slot directory entries as the file name. |
| |
| The C structure for a slot directory entry follows: |
| |
| struct slot { // Up to 13 characters of a long name |
| unsigned char id; // sequence number for slot |
| unsigned char name0_4[10]; // first 5 characters in name |
| unsigned char attr; // attribute byte |
| unsigned char reserved; // always 0 |
| unsigned char alias_checksum; // checksum for 8.3 alias |
| unsigned char name5_10[12]; // 6 more characters in name |
| unsigned char start[2]; // starting cluster number |
| unsigned char name11_12[4]; // last 2 characters in name |
| }; |
| |
| If the layout of the slots looks a little odd, it's only |
| because of Microsoft's efforts to maintain compatibility with old |
| software. The slots must be disguised to prevent old software from |
| panicking. To this end, a number of measures are taken: |
| |
| 1) The attribute byte for a slot directory entry is always set |
| to 0x0f. This corresponds to an old directory entry with |
| attributes of "hidden", "system", "read-only", and "volume |
| label". Most old software will ignore any directory |
| entries with the "volume label" bit set. Real volume label |
| entries don't have the other three bits set. |
| |
| 2) The starting cluster is always set to 0, an impossible |
| value for a DOS file. |
| |
| Because the extended FAT system is backward compatible, it is |
| possible for old software to modify directory entries. Measures must |
| be taken to ensure the validity of slots. An extended FAT system can |
| verify that a slot does in fact belong to an 8.3 directory entry by |
| the following: |
| |
| 1) Positioning. Slots for a file always immediately proceed |
| their corresponding 8.3 directory entry. In addition, each |
| slot has an id which marks its order in the extended file |
| name. Here is a very abbreviated view of an 8.3 directory |
| entry and its corresponding long name slots for the file |
| "My Big File.Extension which is long": |
| |
| <proceeding files...> |
| <slot #3, id = 0x43, characters = "h is long"> |
| <slot #2, id = 0x02, characters = "xtension whic"> |
| <slot #1, id = 0x01, characters = "My Big File.E"> |
| <directory entry, name = "MYBIGFIL.EXT"> |
| |
| Note that the slots are stored from last to first. Slots |
| are numbered from 1 to N. The Nth slot is or'ed with 0x40 |
| to mark it as the last one. |
| |
| 2) Checksum. Each slot has an "alias_checksum" value. The |
| checksum is calculated from the 8.3 name using the |
| following algorithm: |
| |
| for (sum = i = 0; i < 11; i++) { |
| sum = (((sum&1)<<7)|((sum&0xfe)>>1)) + name[i] |
| } |
| |
| 3) If there is free space in the final slot, a Unicode NULL (0x0000) |
| is stored after the final character. After that, all unused |
| characters in the final slot are set to Unicode 0xFFFF. |
| |
| Finally, note that the extended name is stored in Unicode. Each Unicode |
| character takes two bytes. |
