| /* |
| * Copyright © 2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Author: Shobhit Kumar <shobhit.kumar@intel.com> |
| * |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/i915_drm.h> |
| #include <linux/slab.h> |
| #include <video/mipi_display.h> |
| #include <asm/intel-mid.h> |
| #include <video/mipi_display.h> |
| #include "i915_drv.h" |
| #include "intel_drv.h" |
| #include "intel_dsi.h" |
| #include "intel_dsi_cmd.h" |
| |
| #define MIPI_TRANSFER_MODE_SHIFT 0 |
| #define MIPI_VIRTUAL_CHANNEL_SHIFT 1 |
| #define MIPI_PORT_SHIFT 3 |
| |
| #define PREPARE_CNT_MAX 0x3F |
| #define EXIT_ZERO_CNT_MAX 0x3F |
| #define CLK_ZERO_CNT_MAX 0xFF |
| #define TRAIL_CNT_MAX 0x1F |
| |
| #define NS_KHZ_RATIO 1000000 |
| |
| #define GPI0_NC_0_HV_DDI0_HPD 0x4130 |
| #define GPIO_NC_0_HV_DDI0_PAD 0x4138 |
| #define GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120 |
| #define GPIO_NC_1_HV_DDI0_DDC_SDA_PAD 0x4128 |
| #define GPIO_NC_2_HV_DDI0_DDC_SCL 0x4110 |
| #define GPIO_NC_2_HV_DDI0_DDC_SCL_PAD 0x4118 |
| #define GPIO_NC_3_PANEL0_VDDEN 0x4140 |
| #define GPIO_NC_3_PANEL0_VDDEN_PAD 0x4148 |
| #define GPIO_NC_4_PANEL0_BLKEN 0x4150 |
| #define GPIO_NC_4_PANEL0_BLKEN_PAD 0x4158 |
| #define GPIO_NC_5_PANEL0_BLKCTL 0x4160 |
| #define GPIO_NC_5_PANEL0_BLKCTL_PAD 0x4168 |
| #define GPIO_NC_6_PCONF0 0x4180 |
| #define GPIO_NC_6_PAD 0x4188 |
| #define GPIO_NC_7_PCONF0 0x4190 |
| #define GPIO_NC_7_PAD 0x4198 |
| #define GPIO_NC_8_PCONF0 0x4170 |
| #define GPIO_NC_8_PAD 0x4178 |
| #define GPIO_NC_9_PCONF0 0x4100 |
| #define GPIO_NC_9_PAD 0x4108 |
| #define GPIO_NC_10_PCONF0 0x40E0 |
| #define GPIO_NC_10_PAD 0x40E8 |
| #define GPIO_NC_11_PCONF0 0x40F0 |
| #define GPIO_NC_11_PAD 0x40F8 |
| |
| struct gpio_table { |
| u16 function_reg; |
| u16 pad_reg; |
| u8 init; |
| }; |
| |
| static struct gpio_table gtable[] = { |
| { GPI0_NC_0_HV_DDI0_HPD, GPIO_NC_0_HV_DDI0_PAD, 0 }, |
| { GPIO_NC_1_HV_DDI0_DDC_SDA, GPIO_NC_1_HV_DDI0_DDC_SDA_PAD, 0 }, |
| { GPIO_NC_2_HV_DDI0_DDC_SCL, GPIO_NC_2_HV_DDI0_DDC_SCL_PAD, 0 }, |
| { GPIO_NC_3_PANEL0_VDDEN, GPIO_NC_3_PANEL0_VDDEN_PAD, 0 }, |
| { GPIO_NC_4_PANEL0_BLKEN, GPIO_NC_4_PANEL0_BLKEN_PAD, 0 }, |
| { GPIO_NC_5_PANEL0_BLKCTL, GPIO_NC_5_PANEL0_BLKCTL_PAD, 0 }, |
| { GPIO_NC_6_PCONF0, GPIO_NC_6_PAD, 0 }, |
| { GPIO_NC_7_PCONF0, GPIO_NC_7_PAD, 0 }, |
| { GPIO_NC_8_PCONF0, GPIO_NC_8_PAD, 0 }, |
| { GPIO_NC_9_PCONF0, GPIO_NC_9_PAD, 0 }, |
| { GPIO_NC_10_PCONF0, GPIO_NC_10_PAD, 0}, |
| { GPIO_NC_11_PCONF0, GPIO_NC_11_PAD, 0} |
| }; |
| |
| static u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, u8 *data) |
| { |
| u8 type, byte, mode, vc, port; |
| u16 len; |
| |
| byte = *data++; |
| mode = (byte >> MIPI_TRANSFER_MODE_SHIFT) & 0x1; |
| vc = (byte >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 0x3; |
| port = (byte >> MIPI_PORT_SHIFT) & 0x3; |
| |
| /* LP or HS mode */ |
| intel_dsi->hs = mode; |
| |
| /* get packet type and increment the pointer */ |
| type = *data++; |
| |
| len = *((u16 *) data); |
| data += 2; |
| |
| switch (type) { |
| case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: |
| dsi_vc_generic_write_0(intel_dsi, vc); |
| break; |
| case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: |
| dsi_vc_generic_write_1(intel_dsi, vc, *data); |
| break; |
| case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: |
| dsi_vc_generic_write_2(intel_dsi, vc, *data, *(data + 1)); |
| break; |
| case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: |
| case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: |
| case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: |
| DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n"); |
| break; |
| case MIPI_DSI_GENERIC_LONG_WRITE: |
| dsi_vc_generic_write(intel_dsi, vc, data, len); |
| break; |
| case MIPI_DSI_DCS_SHORT_WRITE: |
| dsi_vc_dcs_write_0(intel_dsi, vc, *data); |
| break; |
| case MIPI_DSI_DCS_SHORT_WRITE_PARAM: |
| dsi_vc_dcs_write_1(intel_dsi, vc, *data, *(data + 1)); |
| break; |
| case MIPI_DSI_DCS_READ: |
| DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n"); |
| break; |
| case MIPI_DSI_DCS_LONG_WRITE: |
| dsi_vc_dcs_write(intel_dsi, vc, data, len); |
| break; |
| }; |
| |
| data += len; |
| |
| return data; |
| } |
| |
| static u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, u8 *data) |
| { |
| u32 delay = *((u32 *) data); |
| |
| usleep_range(delay, delay + 10); |
| data += 4; |
| |
| return data; |
| } |
| |
| static u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, u8 *data) |
| { |
| u8 gpio, action; |
| u16 function, pad; |
| u32 val; |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| gpio = *data++; |
| |
| /* pull up/down */ |
| action = *data++; |
| |
| function = gtable[gpio].function_reg; |
| pad = gtable[gpio].pad_reg; |
| |
| mutex_lock(&dev_priv->dpio_lock); |
| if (!gtable[gpio].init) { |
| /* program the function */ |
| /* FIXME: remove constant below */ |
| vlv_gpio_nc_write(dev_priv, function, 0x2000CC00); |
| gtable[gpio].init = 1; |
| } |
| |
| val = 0x4 | action; |
| |
| /* pull up/down */ |
| vlv_gpio_nc_write(dev_priv, pad, val); |
| mutex_unlock(&dev_priv->dpio_lock); |
| |
| return data; |
| } |
| |
| typedef u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi, u8 *data); |
| static const fn_mipi_elem_exec exec_elem[] = { |
| NULL, /* reserved */ |
| mipi_exec_send_packet, |
| mipi_exec_delay, |
| mipi_exec_gpio, |
| NULL, /* status read; later */ |
| }; |
| |
| /* |
| * MIPI Sequence from VBT #53 parsing logic |
| * We have already separated each seqence during bios parsing |
| * Following is generic execution function for any sequence |
| */ |
| |
| static const char * const seq_name[] = { |
| "UNDEFINED", |
| "MIPI_SEQ_ASSERT_RESET", |
| "MIPI_SEQ_INIT_OTP", |
| "MIPI_SEQ_DISPLAY_ON", |
| "MIPI_SEQ_DISPLAY_OFF", |
| "MIPI_SEQ_DEASSERT_RESET" |
| }; |
| |
| static void generic_exec_sequence(struct intel_dsi *intel_dsi, char *sequence) |
| { |
| u8 *data = sequence; |
| fn_mipi_elem_exec mipi_elem_exec; |
| int index; |
| |
| if (!sequence) |
| return; |
| |
| DRM_DEBUG_DRIVER("Starting MIPI sequence - %s\n", seq_name[*data]); |
| |
| /* go to the first element of the sequence */ |
| data++; |
| |
| /* parse each byte till we reach end of sequence byte - 0x00 */ |
| while (1) { |
| index = *data; |
| mipi_elem_exec = exec_elem[index]; |
| if (!mipi_elem_exec) { |
| DRM_ERROR("Unsupported MIPI element, skipping sequence execution\n"); |
| return; |
| } |
| |
| /* goto element payload */ |
| data++; |
| |
| /* execute the element specific rotines */ |
| data = mipi_elem_exec(intel_dsi, data); |
| |
| /* |
| * After processing the element, data should point to |
| * next element or end of sequence |
| * check if have we reached end of sequence |
| */ |
| if (*data == 0x00) |
| break; |
| } |
| } |
| |
| static bool generic_init(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct mipi_config *mipi_config = dev_priv->vbt.dsi.config; |
| struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps; |
| struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode; |
| u32 bits_per_pixel = 24; |
| u32 tlpx_ns, extra_byte_count, bitrate, tlpx_ui; |
| u32 ui_num, ui_den; |
| u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt; |
| u32 ths_prepare_ns, tclk_trail_ns; |
| u32 tclk_prepare_clkzero, ths_prepare_hszero; |
| u32 lp_to_hs_switch, hs_to_lp_switch; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1; |
| intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0; |
| intel_dsi->lane_count = mipi_config->lane_cnt + 1; |
| intel_dsi->pixel_format = mipi_config->videomode_color_format << 7; |
| |
| if (intel_dsi->pixel_format == VID_MODE_FORMAT_RGB666) |
| bits_per_pixel = 18; |
| else if (intel_dsi->pixel_format == VID_MODE_FORMAT_RGB565) |
| bits_per_pixel = 16; |
| |
| bitrate = (mode->clock * bits_per_pixel) / intel_dsi->lane_count; |
| |
| intel_dsi->operation_mode = mipi_config->is_cmd_mode; |
| intel_dsi->video_mode_format = mipi_config->video_transfer_mode; |
| intel_dsi->escape_clk_div = mipi_config->byte_clk_sel; |
| intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout; |
| intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout; |
| intel_dsi->rst_timer_val = mipi_config->device_reset_timer; |
| intel_dsi->init_count = mipi_config->master_init_timer; |
| intel_dsi->bw_timer = mipi_config->dbi_bw_timer; |
| intel_dsi->video_frmt_cfg_bits = mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0; |
| |
| switch (intel_dsi->escape_clk_div) { |
| case 0: |
| tlpx_ns = 50; |
| break; |
| case 1: |
| tlpx_ns = 100; |
| break; |
| |
| case 2: |
| tlpx_ns = 200; |
| break; |
| default: |
| tlpx_ns = 50; |
| break; |
| } |
| |
| switch (intel_dsi->lane_count) { |
| case 1: |
| case 2: |
| extra_byte_count = 2; |
| break; |
| case 3: |
| extra_byte_count = 4; |
| break; |
| case 4: |
| default: |
| extra_byte_count = 3; |
| break; |
| } |
| |
| /* |
| * ui(s) = 1/f [f in hz] |
| * ui(ns) = 10^9 / (f*10^6) [f in Mhz] -> 10^3/f(Mhz) |
| */ |
| |
| /* in Kbps */ |
| ui_num = NS_KHZ_RATIO; |
| ui_den = bitrate; |
| |
| tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero; |
| ths_prepare_hszero = mipi_config->ths_prepare_hszero; |
| |
| /* |
| * B060 |
| * LP byte clock = TLPX/ (8UI) |
| */ |
| intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num); |
| |
| /* count values in UI = (ns value) * (bitrate / (2 * 10^6)) |
| * |
| * Since txddrclkhs_i is 2xUI, all the count values programmed in |
| * DPHY param register are divided by 2 |
| * |
| * prepare count |
| */ |
| ths_prepare_ns = max(mipi_config->ths_prepare, mipi_config->tclk_prepare); |
| prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * 2); |
| |
| /* exit zero count */ |
| exit_zero_cnt = DIV_ROUND_UP( |
| (ths_prepare_hszero - ths_prepare_ns) * ui_den, |
| ui_num * 2 |
| ); |
| |
| /* |
| * Exit zero is unified val ths_zero and ths_exit |
| * minimum value for ths_exit = 110ns |
| * min (exit_zero_cnt * 2) = 110/UI |
| * exit_zero_cnt = 55/UI |
| */ |
| if (exit_zero_cnt < (55 * ui_den / ui_num)) |
| if ((55 * ui_den) % ui_num) |
| exit_zero_cnt += 1; |
| |
| /* clk zero count */ |
| clk_zero_cnt = DIV_ROUND_UP( |
| (tclk_prepare_clkzero - ths_prepare_ns) |
| * ui_den, 2 * ui_num); |
| |
| /* trail count */ |
| tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail); |
| trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, 2 * ui_num); |
| |
| if (prepare_cnt > PREPARE_CNT_MAX || |
| exit_zero_cnt > EXIT_ZERO_CNT_MAX || |
| clk_zero_cnt > CLK_ZERO_CNT_MAX || |
| trail_cnt > TRAIL_CNT_MAX) |
| DRM_DEBUG_DRIVER("Values crossing maximum limits, restricting to max values\n"); |
| |
| if (prepare_cnt > PREPARE_CNT_MAX) |
| prepare_cnt = PREPARE_CNT_MAX; |
| |
| if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) |
| exit_zero_cnt = EXIT_ZERO_CNT_MAX; |
| |
| if (clk_zero_cnt > CLK_ZERO_CNT_MAX) |
| clk_zero_cnt = CLK_ZERO_CNT_MAX; |
| |
| if (trail_cnt > TRAIL_CNT_MAX) |
| trail_cnt = TRAIL_CNT_MAX; |
| |
| /* B080 */ |
| intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 | |
| clk_zero_cnt << 8 | prepare_cnt; |
| |
| /* |
| * LP to HS switch count = 4TLPX + PREP_COUNT * 2 + EXIT_ZERO_COUNT * 2 |
| * + 10UI + Extra Byte Count |
| * |
| * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count |
| * Extra Byte Count is calculated according to number of lanes. |
| * High Low Switch Count is the Max of LP to HS and |
| * HS to LP switch count |
| * |
| */ |
| tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num); |
| |
| /* B044 */ |
| /* FIXME: |
| * The comment above does not match with the code */ |
| lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * 2 + |
| exit_zero_cnt * 2 + 10, 8); |
| |
| hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8); |
| |
| intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch); |
| intel_dsi->hs_to_lp_count += extra_byte_count; |
| |
| /* B088 */ |
| /* LP -> HS for clock lanes |
| * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero + |
| * extra byte count |
| * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt * |
| * 2(in UI) + extra byte count |
| * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) / |
| * 8 + extra byte count |
| */ |
| intel_dsi->clk_lp_to_hs_count = |
| DIV_ROUND_UP( |
| 4 * tlpx_ui + prepare_cnt * 2 + |
| clk_zero_cnt * 2, |
| 8); |
| |
| intel_dsi->clk_lp_to_hs_count += extra_byte_count; |
| |
| /* HS->LP for Clock Lanes |
| * Low Power clock synchronisations + 1Tx byteclk + tclk_trail + |
| * Extra byte count |
| * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count |
| * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 + |
| * Extra byte count |
| */ |
| intel_dsi->clk_hs_to_lp_count = |
| DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8, |
| 8); |
| intel_dsi->clk_hs_to_lp_count += extra_byte_count; |
| |
| DRM_DEBUG_KMS("Eot %s\n", intel_dsi->eotp_pkt ? "enabled" : "disabled"); |
| DRM_DEBUG_KMS("Clockstop %s\n", intel_dsi->clock_stop ? |
| "disabled" : "enabled"); |
| DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video"); |
| DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format); |
| DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div); |
| DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout); |
| DRM_DEBUG_KMS("Turnaround Timeout 0x%x\n", intel_dsi->turn_arnd_val); |
| DRM_DEBUG_KMS("Init Count 0x%x\n", intel_dsi->init_count); |
| DRM_DEBUG_KMS("HS to LP Count 0x%x\n", intel_dsi->hs_to_lp_count); |
| DRM_DEBUG_KMS("LP Byte Clock %d\n", intel_dsi->lp_byte_clk); |
| DRM_DEBUG_KMS("DBI BW Timer 0x%x\n", intel_dsi->bw_timer); |
| DRM_DEBUG_KMS("LP to HS Clock Count 0x%x\n", intel_dsi->clk_lp_to_hs_count); |
| DRM_DEBUG_KMS("HS to LP Clock Count 0x%x\n", intel_dsi->clk_hs_to_lp_count); |
| DRM_DEBUG_KMS("BTA %s\n", |
| intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA ? |
| "disabled" : "enabled"); |
| |
| /* delays in VBT are in unit of 100us, so need to convert |
| * here in ms |
| * Delay (100us) * 100 /1000 = Delay / 10 (ms) */ |
| intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10; |
| intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10; |
| intel_dsi->panel_on_delay = pps->panel_on_delay / 10; |
| intel_dsi->panel_off_delay = pps->panel_off_delay / 10; |
| intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10; |
| |
| return true; |
| } |
| |
| static int generic_mode_valid(struct intel_dsi_device *dsi, |
| struct drm_display_mode *mode) |
| { |
| return MODE_OK; |
| } |
| |
| static bool generic_mode_fixup(struct intel_dsi_device *dsi, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) { |
| return true; |
| } |
| |
| static void generic_panel_reset(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET]; |
| |
| generic_exec_sequence(intel_dsi, sequence); |
| } |
| |
| static void generic_disable_panel_power(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]; |
| |
| generic_exec_sequence(intel_dsi, sequence); |
| } |
| |
| static void generic_send_otp_cmds(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; |
| |
| generic_exec_sequence(intel_dsi, sequence); |
| } |
| |
| static void generic_enable(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_DISPLAY_ON]; |
| |
| generic_exec_sequence(intel_dsi, sequence); |
| } |
| |
| static void generic_disable(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_DISPLAY_OFF]; |
| |
| generic_exec_sequence(intel_dsi, sequence); |
| } |
| |
| static enum drm_connector_status generic_detect(struct intel_dsi_device *dsi) |
| { |
| return connector_status_connected; |
| } |
| |
| static bool generic_get_hw_state(struct intel_dsi_device *dev) |
| { |
| return true; |
| } |
| |
| static struct drm_display_mode *generic_get_modes(struct intel_dsi_device *dsi) |
| { |
| struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev); |
| struct drm_device *dev = intel_dsi->base.base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| dev_priv->vbt.lfp_lvds_vbt_mode->type |= DRM_MODE_TYPE_PREFERRED; |
| return dev_priv->vbt.lfp_lvds_vbt_mode; |
| } |
| |
| static void generic_destroy(struct intel_dsi_device *dsi) { } |
| |
| /* Callbacks. We might not need them all. */ |
| struct intel_dsi_dev_ops vbt_generic_dsi_display_ops = { |
| .init = generic_init, |
| .mode_valid = generic_mode_valid, |
| .mode_fixup = generic_mode_fixup, |
| .panel_reset = generic_panel_reset, |
| .disable_panel_power = generic_disable_panel_power, |
| .send_otp_cmds = generic_send_otp_cmds, |
| .enable = generic_enable, |
| .disable = generic_disable, |
| .detect = generic_detect, |
| .get_hw_state = generic_get_hw_state, |
| .get_modes = generic_get_modes, |
| .destroy = generic_destroy, |
| }; |