blob: a5ddf3bce9c3fe06e3338b8b1c15e86405f312df [file] [log] [blame]
/*
* Copyright © 2011-2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Ben Widawsky <ben@bwidawsk.net>
*
*/
/*
* This file implements HW context support. On gen5+ a HW context consists of an
* opaque GPU object which is referenced at times of context saves and restores.
* With RC6 enabled, the context is also referenced as the GPU enters and exists
* from RC6 (GPU has it's own internal power context, except on gen5). Though
* something like a context does exist for the media ring, the code only
* supports contexts for the render ring.
*
* In software, there is a distinction between contexts created by the user,
* and the default HW context. The default HW context is used by GPU clients
* that do not request setup of their own hardware context. The default
* context's state is never restored to help prevent programming errors. This
* would happen if a client ran and piggy-backed off another clients GPU state.
* The default context only exists to give the GPU some offset to load as the
* current to invoke a save of the context we actually care about. In fact, the
* code could likely be constructed, albeit in a more complicated fashion, to
* never use the default context, though that limits the driver's ability to
* swap out, and/or destroy other contexts.
*
* All other contexts are created as a request by the GPU client. These contexts
* store GPU state, and thus allow GPU clients to not re-emit state (and
* potentially query certain state) at any time. The kernel driver makes
* certain that the appropriate commands are inserted.
*
* The context life cycle is semi-complicated in that context BOs may live
* longer than the context itself because of the way the hardware, and object
* tracking works. Below is a very crude representation of the state machine
* describing the context life.
* refcount pincount active
* S0: initial state 0 0 0
* S1: context created 1 0 0
* S2: context is currently running 2 1 X
* S3: GPU referenced, but not current 2 0 1
* S4: context is current, but destroyed 1 1 0
* S5: like S3, but destroyed 1 0 1
*
* The most common (but not all) transitions:
* S0->S1: client creates a context
* S1->S2: client submits execbuf with context
* S2->S3: other clients submits execbuf with context
* S3->S1: context object was retired
* S3->S2: clients submits another execbuf
* S2->S4: context destroy called with current context
* S3->S5->S0: destroy path
* S4->S5->S0: destroy path on current context
*
* There are two confusing terms used above:
* The "current context" means the context which is currently running on the
* GPU. The GPU has loaded its state already and has stored away the gtt
* offset of the BO. The GPU is not actively referencing the data at this
* offset, but it will on the next context switch. The only way to avoid this
* is to do a GPU reset.
*
* An "active context' is one which was previously the "current context" and is
* on the active list waiting for the next context switch to occur. Until this
* happens, the object must remain at the same gtt offset. It is therefore
* possible to destroy a context, but it is still active.
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
/* This is a HW constraint. The value below is the largest known requirement
* I've seen in a spec to date, and that was a workaround for a non-shipping
* part. It should be safe to decrease this, but it's more future proof as is.
*/
#define GEN6_CONTEXT_ALIGN (64<<10)
#define GEN7_CONTEXT_ALIGN 4096
static void do_ppgtt_cleanup(struct i915_hw_ppgtt *ppgtt)
{
struct drm_device *dev = ppgtt->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct i915_address_space *vm = &ppgtt->base;
if (ppgtt == dev_priv->mm.aliasing_ppgtt ||
(list_empty(&vm->active_list) && list_empty(&vm->inactive_list))) {
ppgtt->base.cleanup(&ppgtt->base);
return;
}
/*
* Make sure vmas are unbound before we take down the drm_mm
*
* FIXME: Proper refcounting should take care of this, this shouldn't be
* needed at all.
*/
if (!list_empty(&vm->active_list)) {
struct i915_vma *vma;
list_for_each_entry(vma, &vm->active_list, mm_list)
if (WARN_ON(list_empty(&vma->vma_link) ||
list_is_singular(&vma->vma_link)))
break;
i915_gem_evict_vm(&ppgtt->base, true);
} else {
i915_gem_retire_requests(dev);
i915_gem_evict_vm(&ppgtt->base, false);
}
ppgtt->base.cleanup(&ppgtt->base);
}
static void ppgtt_release(struct kref *kref)
{
struct i915_hw_ppgtt *ppgtt =
container_of(kref, struct i915_hw_ppgtt, ref);
do_ppgtt_cleanup(ppgtt);
kfree(ppgtt);
}
static size_t get_context_alignment(struct drm_device *dev)
{
if (IS_GEN6(dev))
return GEN6_CONTEXT_ALIGN;
return GEN7_CONTEXT_ALIGN;
}
static int get_context_size(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
u32 reg;
switch (INTEL_INFO(dev)->gen) {
case 6:
reg = I915_READ(CXT_SIZE);
ret = GEN6_CXT_TOTAL_SIZE(reg) * 64;
break;
case 7:
reg = I915_READ(GEN7_CXT_SIZE);
if (IS_HASWELL(dev))
ret = HSW_CXT_TOTAL_SIZE;
else
ret = GEN7_CXT_TOTAL_SIZE(reg) * 64;
break;
case 8:
ret = GEN8_CXT_TOTAL_SIZE;
break;
default:
BUG();
}
return ret;
}
void i915_gem_context_free(struct kref *ctx_ref)
{
struct intel_context *ctx = container_of(ctx_ref,
typeof(*ctx), ref);
struct i915_hw_ppgtt *ppgtt = NULL;
if (ctx->obj) {
/* We refcount even the aliasing PPGTT to keep the code symmetric */
if (USES_PPGTT(ctx->obj->base.dev))
ppgtt = ctx_to_ppgtt(ctx);
/* XXX: Free up the object before tearing down the address space, in
* case we're bound in the PPGTT */
drm_gem_object_unreference(&ctx->obj->base);
}
if (ppgtt)
kref_put(&ppgtt->ref, ppgtt_release);
list_del(&ctx->link);
kfree(ctx);
}
static struct i915_hw_ppgtt *
create_vm_for_ctx(struct drm_device *dev, struct intel_context *ctx)
{
struct i915_hw_ppgtt *ppgtt;
int ret;
ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL);
if (!ppgtt)
return ERR_PTR(-ENOMEM);
ret = i915_gem_init_ppgtt(dev, ppgtt);
if (ret) {
kfree(ppgtt);
return ERR_PTR(ret);
}
ppgtt->ctx = ctx;
return ppgtt;
}
static struct intel_context *
__create_hw_context(struct drm_device *dev,
struct drm_i915_file_private *file_priv)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *ctx;
int ret;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (ctx == NULL)
return ERR_PTR(-ENOMEM);
kref_init(&ctx->ref);
list_add_tail(&ctx->link, &dev_priv->context_list);
if (dev_priv->hw_context_size) {
ctx->obj = i915_gem_alloc_object(dev, dev_priv->hw_context_size);
if (ctx->obj == NULL) {
ret = -ENOMEM;
goto err_out;
}
/*
* Try to make the context utilize L3 as well as LLC.
*
* On VLV we don't have L3 controls in the PTEs so we
* shouldn't touch the cache level, especially as that
* would make the object snooped which might have a
* negative performance impact.
*/
if (INTEL_INFO(dev)->gen >= 7 && !IS_VALLEYVIEW(dev)) {
ret = i915_gem_object_set_cache_level(ctx->obj,
I915_CACHE_L3_LLC);
/* Failure shouldn't ever happen this early */
if (WARN_ON(ret))
goto err_out;
}
}
/* Default context will never have a file_priv */
if (file_priv != NULL) {
ret = idr_alloc(&file_priv->context_idr, ctx,
DEFAULT_CONTEXT_ID, 0, GFP_KERNEL);
if (ret < 0)
goto err_out;
} else
ret = DEFAULT_CONTEXT_ID;
ctx->file_priv = file_priv;
ctx->id = ret;
/* NB: Mark all slices as needing a remap so that when the context first
* loads it will restore whatever remap state already exists. If there
* is no remap info, it will be a NOP. */
ctx->remap_slice = (1 << NUM_L3_SLICES(dev)) - 1;
return ctx;
err_out:
i915_gem_context_unreference(ctx);
return ERR_PTR(ret);
}
/**
* The default context needs to exist per ring that uses contexts. It stores the
* context state of the GPU for applications that don't utilize HW contexts, as
* well as an idle case.
*/
static struct intel_context *
i915_gem_create_context(struct drm_device *dev,
struct drm_i915_file_private *file_priv,
bool create_vm)
{
const bool is_global_default_ctx = file_priv == NULL;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *ctx;
int ret = 0;
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
ctx = __create_hw_context(dev, file_priv);
if (IS_ERR(ctx))
return ctx;
if (is_global_default_ctx && ctx->obj) {
/* We may need to do things with the shrinker which
* require us to immediately switch back to the default
* context. This can cause a problem as pinning the
* default context also requires GTT space which may not
* be available. To avoid this we always pin the default
* context.
*/
ret = i915_gem_obj_ggtt_pin(ctx->obj,
get_context_alignment(dev), 0);
if (ret) {
DRM_DEBUG_DRIVER("Couldn't pin %d\n", ret);
goto err_destroy;
}
}
if (create_vm) {
struct i915_hw_ppgtt *ppgtt = create_vm_for_ctx(dev, ctx);
if (IS_ERR_OR_NULL(ppgtt)) {
DRM_DEBUG_DRIVER("PPGTT setup failed (%ld)\n",
PTR_ERR(ppgtt));
ret = PTR_ERR(ppgtt);
goto err_unpin;
} else
ctx->vm = &ppgtt->base;
/* This case is reserved for the global default context and
* should only happen once. */
if (is_global_default_ctx) {
if (WARN_ON(dev_priv->mm.aliasing_ppgtt)) {
ret = -EEXIST;
goto err_unpin;
}
dev_priv->mm.aliasing_ppgtt = ppgtt;
}
} else if (USES_PPGTT(dev)) {
/* For platforms which only have aliasing PPGTT, we fake the
* address space and refcounting. */
ctx->vm = &dev_priv->mm.aliasing_ppgtt->base;
kref_get(&dev_priv->mm.aliasing_ppgtt->ref);
} else
ctx->vm = &dev_priv->gtt.base;
return ctx;
err_unpin:
if (is_global_default_ctx && ctx->obj)
i915_gem_object_ggtt_unpin(ctx->obj);
err_destroy:
i915_gem_context_unreference(ctx);
return ERR_PTR(ret);
}
void i915_gem_context_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
/* Prevent the hardware from restoring the last context (which hung) on
* the next switch */
for (i = 0; i < I915_NUM_RINGS; i++) {
struct intel_engine_cs *ring = &dev_priv->ring[i];
struct intel_context *dctx = ring->default_context;
/* Do a fake switch to the default context */
if (ring->last_context == dctx)
continue;
if (!ring->last_context)
continue;
if (dctx->obj && i == RCS) {
WARN_ON(i915_gem_obj_ggtt_pin(dctx->obj,
get_context_alignment(dev), 0));
/* Fake a finish/inactive */
dctx->obj->base.write_domain = 0;
dctx->obj->active = 0;
}
i915_gem_context_unreference(ring->last_context);
i915_gem_context_reference(dctx);
ring->last_context = dctx;
}
}
int i915_gem_context_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *ctx;
int i;
/* Init should only be called once per module load. Eventually the
* restriction on the context_disabled check can be loosened. */
if (WARN_ON(dev_priv->ring[RCS].default_context))
return 0;
if (HAS_HW_CONTEXTS(dev)) {
dev_priv->hw_context_size = round_up(get_context_size(dev), 4096);
if (dev_priv->hw_context_size > (1<<20)) {
DRM_DEBUG_DRIVER("Disabling HW Contexts; invalid size %d\n",
dev_priv->hw_context_size);
dev_priv->hw_context_size = 0;
}
}
ctx = i915_gem_create_context(dev, NULL, USES_PPGTT(dev));
if (IS_ERR(ctx)) {
DRM_ERROR("Failed to create default global context (error %ld)\n",
PTR_ERR(ctx));
return PTR_ERR(ctx);
}
/* NB: RCS will hold a ref for all rings */
for (i = 0; i < I915_NUM_RINGS; i++)
dev_priv->ring[i].default_context = ctx;
DRM_DEBUG_DRIVER("%s context support initialized\n", dev_priv->hw_context_size ? "HW" : "fake");
return 0;
}
void i915_gem_context_fini(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_context *dctx = dev_priv->ring[RCS].default_context;
int i;
if (dctx->obj) {
/* The only known way to stop the gpu from accessing the hw context is
* to reset it. Do this as the very last operation to avoid confusing
* other code, leading to spurious errors. */
intel_gpu_reset(dev);
/* When default context is created and switched to, base object refcount
* will be 2 (+1 from object creation and +1 from do_switch()).
* i915_gem_context_fini() will be called after gpu_idle() has switched
* to default context. So we need to unreference the base object once
* to offset the do_switch part, so that i915_gem_context_unreference()
* can then free the base object correctly. */
WARN_ON(!dev_priv->ring[RCS].last_context);
if (dev_priv->ring[RCS].last_context == dctx) {
/* Fake switch to NULL context */
WARN_ON(dctx->obj->active);
i915_gem_object_ggtt_unpin(dctx->obj);
i915_gem_context_unreference(dctx);
dev_priv->ring[RCS].last_context = NULL;
}
i915_gem_object_ggtt_unpin(dctx->obj);
}
for (i = 0; i < I915_NUM_RINGS; i++) {
struct intel_engine_cs *ring = &dev_priv->ring[i];
if (ring->last_context)
i915_gem_context_unreference(ring->last_context);
ring->default_context = NULL;
ring->last_context = NULL;
}
i915_gem_context_unreference(dctx);
}
int i915_gem_context_enable(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *ring;
int ret, i;
/* This is the only place the aliasing PPGTT gets enabled, which means
* it has to happen before we bail on reset */
if (dev_priv->mm.aliasing_ppgtt) {
struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
ppgtt->enable(ppgtt);
}
/* FIXME: We should make this work, even in reset */
if (i915_reset_in_progress(&dev_priv->gpu_error))
return 0;
BUG_ON(!dev_priv->ring[RCS].default_context);
for_each_ring(ring, dev_priv, i) {
ret = i915_switch_context(ring, ring->default_context);
if (ret)
return ret;
}
return 0;
}
static int context_idr_cleanup(int id, void *p, void *data)
{
struct intel_context *ctx = p;
i915_gem_context_unreference(ctx);
return 0;
}
int i915_gem_context_open(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct intel_context *ctx;
idr_init(&file_priv->context_idr);
mutex_lock(&dev->struct_mutex);
ctx = i915_gem_create_context(dev, file_priv, USES_FULL_PPGTT(dev));
mutex_unlock(&dev->struct_mutex);
if (IS_ERR(ctx)) {
idr_destroy(&file_priv->context_idr);
return PTR_ERR(ctx);
}
return 0;
}
void i915_gem_context_close(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL);
idr_destroy(&file_priv->context_idr);
}
struct intel_context *
i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)
{
struct intel_context *ctx;
ctx = (struct intel_context *)idr_find(&file_priv->context_idr, id);
if (!ctx)
return ERR_PTR(-ENOENT);
return ctx;
}
static inline int
mi_set_context(struct intel_engine_cs *ring,
struct intel_context *new_context,
u32 hw_flags)
{
int ret;
/* w/a: If Flush TLB Invalidation Mode is enabled, driver must do a TLB
* invalidation prior to MI_SET_CONTEXT. On GEN6 we don't set the value
* explicitly, so we rely on the value at ring init, stored in
* itlb_before_ctx_switch.
*/
if (IS_GEN6(ring->dev)) {
ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, 0);
if (ret)
return ret;
}
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
/* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw,bdw,chv */
if (INTEL_INFO(ring->dev)->gen >= 7)
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_DISABLE);
else
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_SET_CONTEXT);
intel_ring_emit(ring, i915_gem_obj_ggtt_offset(new_context->obj) |
MI_MM_SPACE_GTT |
MI_SAVE_EXT_STATE_EN |
MI_RESTORE_EXT_STATE_EN |
hw_flags);
/*
* w/a: MI_SET_CONTEXT must always be followed by MI_NOOP
* WaMiSetContext_Hang:snb,ivb,vlv
*/
intel_ring_emit(ring, MI_NOOP);
if (INTEL_INFO(ring->dev)->gen >= 7)
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
else
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return ret;
}
static int do_switch(struct intel_engine_cs *ring,
struct intel_context *to)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
struct intel_context *from = ring->last_context;
struct i915_hw_ppgtt *ppgtt = ctx_to_ppgtt(to);
u32 hw_flags = 0;
bool uninitialized = false;
int ret, i;
if (from != NULL && ring == &dev_priv->ring[RCS]) {
BUG_ON(from->obj == NULL);
BUG_ON(!i915_gem_obj_is_pinned(from->obj));
}
if (from == to && from->last_ring == ring && !to->remap_slice)
return 0;
/* Trying to pin first makes error handling easier. */
if (ring == &dev_priv->ring[RCS]) {
ret = i915_gem_obj_ggtt_pin(to->obj,
get_context_alignment(ring->dev), 0);
if (ret)
return ret;
}
/*
* Pin can switch back to the default context if we end up calling into
* evict_everything - as a last ditch gtt defrag effort that also
* switches to the default context. Hence we need to reload from here.
*/
from = ring->last_context;
if (USES_FULL_PPGTT(ring->dev)) {
ret = ppgtt->switch_mm(ppgtt, ring, false);
if (ret)
goto unpin_out;
}
if (ring != &dev_priv->ring[RCS]) {
if (from)
i915_gem_context_unreference(from);
goto done;
}
/*
* Clear this page out of any CPU caches for coherent swap-in/out. Note
* that thanks to write = false in this call and us not setting any gpu
* write domains when putting a context object onto the active list
* (when switching away from it), this won't block.
*
* XXX: We need a real interface to do this instead of trickery.
*/
ret = i915_gem_object_set_to_gtt_domain(to->obj, false);
if (ret)
goto unpin_out;
if (!to->obj->has_global_gtt_mapping) {
struct i915_vma *vma = i915_gem_obj_to_vma(to->obj,
&dev_priv->gtt.base);
vma->bind_vma(vma, to->obj->cache_level, GLOBAL_BIND);
}
if (!to->is_initialized || i915_gem_context_is_default(to))
hw_flags |= MI_RESTORE_INHIBIT;
ret = mi_set_context(ring, to, hw_flags);
if (ret)
goto unpin_out;
for (i = 0; i < MAX_L3_SLICES; i++) {
if (!(to->remap_slice & (1<<i)))
continue;
ret = i915_gem_l3_remap(ring, i);
/* If it failed, try again next round */
if (ret)
DRM_DEBUG_DRIVER("L3 remapping failed\n");
else
to->remap_slice &= ~(1<<i);
}
/* The backing object for the context is done after switching to the
* *next* context. Therefore we cannot retire the previous context until
* the next context has already started running. In fact, the below code
* is a bit suboptimal because the retiring can occur simply after the
* MI_SET_CONTEXT instead of when the next seqno has completed.
*/
if (from != NULL) {
from->obj->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
i915_vma_move_to_active(i915_gem_obj_to_ggtt(from->obj), ring);
/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
* whole damn pipeline, we don't need to explicitly mark the
* object dirty. The only exception is that the context must be
* correct in case the object gets swapped out. Ideally we'd be
* able to defer doing this until we know the object would be
* swapped, but there is no way to do that yet.
*/
from->obj->dirty = 1;
BUG_ON(from->obj->ring != ring);
/* obj is kept alive until the next request by its active ref */
i915_gem_object_ggtt_unpin(from->obj);
i915_gem_context_unreference(from);
}
uninitialized = !to->is_initialized && from == NULL;
to->is_initialized = true;
done:
i915_gem_context_reference(to);
ring->last_context = to;
to->last_ring = ring;
if (uninitialized) {
ret = i915_gem_render_state_init(ring);
if (ret)
DRM_ERROR("init render state: %d\n", ret);
}
return 0;
unpin_out:
if (ring->id == RCS)
i915_gem_object_ggtt_unpin(to->obj);
return ret;
}
/**
* i915_switch_context() - perform a GPU context switch.
* @ring: ring for which we'll execute the context switch
* @to: the context to switch to
*
* The context life cycle is simple. The context refcount is incremented and
* decremented by 1 and create and destroy. If the context is in use by the GPU,
* it will have a refoucnt > 1. This allows us to destroy the context abstract
* object while letting the normal object tracking destroy the backing BO.
*/
int i915_switch_context(struct intel_engine_cs *ring,
struct intel_context *to)
{
struct drm_i915_private *dev_priv = ring->dev->dev_private;
WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
if (to->obj == NULL) { /* We have the fake context */
if (to != ring->last_context) {
i915_gem_context_reference(to);
if (ring->last_context)
i915_gem_context_unreference(ring->last_context);
ring->last_context = to;
}
return 0;
}
return do_switch(ring, to);
}
static bool hw_context_enabled(struct drm_device *dev)
{
return to_i915(dev)->hw_context_size;
}
int i915_gem_context_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_context_create *args = data;
struct drm_i915_file_private *file_priv = file->driver_priv;
struct intel_context *ctx;
int ret;
if (!hw_context_enabled(dev))
return -ENODEV;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_create_context(dev, file_priv, USES_FULL_PPGTT(dev));
mutex_unlock(&dev->struct_mutex);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
args->ctx_id = ctx->id;
DRM_DEBUG_DRIVER("HW context %d created\n", args->ctx_id);
return 0;
}
int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_context_destroy *args = data;
struct drm_i915_file_private *file_priv = file->driver_priv;
struct intel_context *ctx;
int ret;
if (args->ctx_id == DEFAULT_CONTEXT_ID)
return -ENOENT;
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_context_get(file_priv, args->ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
return PTR_ERR(ctx);
}
idr_remove(&ctx->file_priv->context_idr, ctx->id);
i915_gem_context_unreference(ctx);
mutex_unlock(&dev->struct_mutex);
DRM_DEBUG_DRIVER("HW context %d destroyed\n", args->ctx_id);
return 0;
}