| /* |
| * Copyright (c) 2005-2011 Atheros Communications Inc. |
| * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/bitops.h> |
| |
| #include "core.h" |
| #include "debug.h" |
| |
| #include "targaddrs.h" |
| #include "bmi.h" |
| |
| #include "hif.h" |
| #include "htc.h" |
| |
| #include "ce.h" |
| #include "pci.h" |
| |
| enum ath10k_pci_irq_mode { |
| ATH10K_PCI_IRQ_AUTO = 0, |
| ATH10K_PCI_IRQ_LEGACY = 1, |
| ATH10K_PCI_IRQ_MSI = 2, |
| }; |
| |
| static unsigned int ath10k_target_ps; |
| static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO; |
| |
| module_param(ath10k_target_ps, uint, 0644); |
| MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option"); |
| |
| module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644); |
| MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)"); |
| |
| #define QCA988X_2_0_DEVICE_ID (0x003c) |
| |
| static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = { |
| { PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */ |
| {0} |
| }; |
| |
| static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address, |
| u32 *data); |
| |
| static int ath10k_pci_post_rx(struct ath10k *ar); |
| static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info, |
| int num); |
| static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info); |
| static int ath10k_pci_cold_reset(struct ath10k *ar); |
| static int ath10k_pci_warm_reset(struct ath10k *ar); |
| static int ath10k_pci_wait_for_target_init(struct ath10k *ar); |
| static int ath10k_pci_init_irq(struct ath10k *ar); |
| static int ath10k_pci_deinit_irq(struct ath10k *ar); |
| static int ath10k_pci_request_irq(struct ath10k *ar); |
| static void ath10k_pci_free_irq(struct ath10k *ar); |
| static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe, |
| struct ath10k_ce_pipe *rx_pipe, |
| struct bmi_xfer *xfer); |
| |
| static const struct ce_attr host_ce_config_wlan[] = { |
| /* CE0: host->target HTC control and raw streams */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 16, |
| .src_sz_max = 256, |
| .dest_nentries = 0, |
| }, |
| |
| /* CE1: target->host HTT + HTC control */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 0, |
| .src_sz_max = 512, |
| .dest_nentries = 512, |
| }, |
| |
| /* CE2: target->host WMI */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 0, |
| .src_sz_max = 2048, |
| .dest_nentries = 32, |
| }, |
| |
| /* CE3: host->target WMI */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 32, |
| .src_sz_max = 2048, |
| .dest_nentries = 0, |
| }, |
| |
| /* CE4: host->target HTT */ |
| { |
| .flags = CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, |
| .src_nentries = CE_HTT_H2T_MSG_SRC_NENTRIES, |
| .src_sz_max = 256, |
| .dest_nentries = 0, |
| }, |
| |
| /* CE5: unused */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 0, |
| .src_sz_max = 0, |
| .dest_nentries = 0, |
| }, |
| |
| /* CE6: target autonomous hif_memcpy */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 0, |
| .src_sz_max = 0, |
| .dest_nentries = 0, |
| }, |
| |
| /* CE7: ce_diag, the Diagnostic Window */ |
| { |
| .flags = CE_ATTR_FLAGS, |
| .src_nentries = 2, |
| .src_sz_max = DIAG_TRANSFER_LIMIT, |
| .dest_nentries = 2, |
| }, |
| }; |
| |
| /* Target firmware's Copy Engine configuration. */ |
| static const struct ce_pipe_config target_ce_config_wlan[] = { |
| /* CE0: host->target HTC control and raw streams */ |
| { |
| .pipenum = 0, |
| .pipedir = PIPEDIR_OUT, |
| .nentries = 32, |
| .nbytes_max = 256, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* CE1: target->host HTT + HTC control */ |
| { |
| .pipenum = 1, |
| .pipedir = PIPEDIR_IN, |
| .nentries = 32, |
| .nbytes_max = 512, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* CE2: target->host WMI */ |
| { |
| .pipenum = 2, |
| .pipedir = PIPEDIR_IN, |
| .nentries = 32, |
| .nbytes_max = 2048, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* CE3: host->target WMI */ |
| { |
| .pipenum = 3, |
| .pipedir = PIPEDIR_OUT, |
| .nentries = 32, |
| .nbytes_max = 2048, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* CE4: host->target HTT */ |
| { |
| .pipenum = 4, |
| .pipedir = PIPEDIR_OUT, |
| .nentries = 256, |
| .nbytes_max = 256, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* NB: 50% of src nentries, since tx has 2 frags */ |
| |
| /* CE5: unused */ |
| { |
| .pipenum = 5, |
| .pipedir = PIPEDIR_OUT, |
| .nentries = 32, |
| .nbytes_max = 2048, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* CE6: Reserved for target autonomous hif_memcpy */ |
| { |
| .pipenum = 6, |
| .pipedir = PIPEDIR_INOUT, |
| .nentries = 32, |
| .nbytes_max = 4096, |
| .flags = CE_ATTR_FLAGS, |
| .reserved = 0, |
| }, |
| |
| /* CE7 used only by Host */ |
| }; |
| |
| static bool ath10k_pci_irq_pending(struct ath10k *ar) |
| { |
| u32 cause; |
| |
| /* Check if the shared legacy irq is for us */ |
| cause = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_CAUSE_ADDRESS); |
| if (cause & (PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL)) |
| return true; |
| |
| return false; |
| } |
| |
| static void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar) |
| { |
| /* IMPORTANT: INTR_CLR register has to be set after |
| * INTR_ENABLE is set to 0, otherwise interrupt can not be |
| * really cleared. */ |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS, |
| 0); |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CLR_ADDRESS, |
| PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL); |
| |
| /* IMPORTANT: this extra read transaction is required to |
| * flush the posted write buffer. */ |
| (void) ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_ENABLE_ADDRESS); |
| } |
| |
| static void ath10k_pci_enable_legacy_irq(struct ath10k *ar) |
| { |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_ENABLE_ADDRESS, |
| PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL); |
| |
| /* IMPORTANT: this extra read transaction is required to |
| * flush the posted write buffer. */ |
| (void) ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_ENABLE_ADDRESS); |
| } |
| |
| static irqreturn_t ath10k_pci_early_irq_handler(int irq, void *arg) |
| { |
| struct ath10k *ar = arg; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| if (ar_pci->num_msi_intrs == 0) { |
| if (!ath10k_pci_irq_pending(ar)) |
| return IRQ_NONE; |
| |
| ath10k_pci_disable_and_clear_legacy_irq(ar); |
| } |
| |
| tasklet_schedule(&ar_pci->early_irq_tasklet); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ath10k_pci_request_early_irq(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret; |
| |
| /* Regardless whether MSI-X/MSI/legacy irqs have been set up the first |
| * interrupt from irq vector is triggered in all cases for FW |
| * indication/errors */ |
| ret = request_irq(ar_pci->pdev->irq, ath10k_pci_early_irq_handler, |
| IRQF_SHARED, "ath10k_pci (early)", ar); |
| if (ret) { |
| ath10k_warn("failed to request early irq: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void ath10k_pci_free_early_irq(struct ath10k *ar) |
| { |
| free_irq(ath10k_pci_priv(ar)->pdev->irq, ar); |
| } |
| |
| /* |
| * Diagnostic read/write access is provided for startup/config/debug usage. |
| * Caller must guarantee proper alignment, when applicable, and single user |
| * at any moment. |
| */ |
| static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data, |
| int nbytes) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret = 0; |
| u32 buf; |
| unsigned int completed_nbytes, orig_nbytes, remaining_bytes; |
| unsigned int id; |
| unsigned int flags; |
| struct ath10k_ce_pipe *ce_diag; |
| /* Host buffer address in CE space */ |
| u32 ce_data; |
| dma_addr_t ce_data_base = 0; |
| void *data_buf = NULL; |
| int i; |
| |
| /* |
| * This code cannot handle reads to non-memory space. Redirect to the |
| * register read fn but preserve the multi word read capability of |
| * this fn |
| */ |
| if (address < DRAM_BASE_ADDRESS) { |
| if (!IS_ALIGNED(address, 4) || |
| !IS_ALIGNED((unsigned long)data, 4)) |
| return -EIO; |
| |
| while ((nbytes >= 4) && ((ret = ath10k_pci_diag_read_access( |
| ar, address, (u32 *)data)) == 0)) { |
| nbytes -= sizeof(u32); |
| address += sizeof(u32); |
| data += sizeof(u32); |
| } |
| return ret; |
| } |
| |
| ce_diag = ar_pci->ce_diag; |
| |
| /* |
| * Allocate a temporary bounce buffer to hold caller's data |
| * to be DMA'ed from Target. This guarantees |
| * 1) 4-byte alignment |
| * 2) Buffer in DMA-able space |
| */ |
| orig_nbytes = nbytes; |
| data_buf = (unsigned char *)pci_alloc_consistent(ar_pci->pdev, |
| orig_nbytes, |
| &ce_data_base); |
| |
| if (!data_buf) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| memset(data_buf, 0, orig_nbytes); |
| |
| remaining_bytes = orig_nbytes; |
| ce_data = ce_data_base; |
| while (remaining_bytes) { |
| nbytes = min_t(unsigned int, remaining_bytes, |
| DIAG_TRANSFER_LIMIT); |
| |
| ret = ath10k_ce_recv_buf_enqueue(ce_diag, NULL, ce_data); |
| if (ret != 0) |
| goto done; |
| |
| /* Request CE to send from Target(!) address to Host buffer */ |
| /* |
| * The address supplied by the caller is in the |
| * Target CPU virtual address space. |
| * |
| * In order to use this address with the diagnostic CE, |
| * convert it from Target CPU virtual address space |
| * to CE address space |
| */ |
| ath10k_pci_wake(ar); |
| address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, |
| address); |
| ath10k_pci_sleep(ar); |
| |
| ret = ath10k_ce_send(ce_diag, NULL, (u32)address, nbytes, 0, |
| 0); |
| if (ret) |
| goto done; |
| |
| i = 0; |
| while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf, |
| &completed_nbytes, |
| &id) != 0) { |
| mdelay(1); |
| if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| ret = -EBUSY; |
| goto done; |
| } |
| } |
| |
| if (nbytes != completed_nbytes) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| if (buf != (u32) address) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| i = 0; |
| while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf, |
| &completed_nbytes, |
| &id, &flags) != 0) { |
| mdelay(1); |
| |
| if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| ret = -EBUSY; |
| goto done; |
| } |
| } |
| |
| if (nbytes != completed_nbytes) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| if (buf != ce_data) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| remaining_bytes -= nbytes; |
| address += nbytes; |
| ce_data += nbytes; |
| } |
| |
| done: |
| if (ret == 0) { |
| /* Copy data from allocated DMA buf to caller's buf */ |
| WARN_ON_ONCE(orig_nbytes & 3); |
| for (i = 0; i < orig_nbytes / sizeof(__le32); i++) { |
| ((u32 *)data)[i] = |
| __le32_to_cpu(((__le32 *)data_buf)[i]); |
| } |
| } else |
| ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", |
| __func__, address); |
| |
| if (data_buf) |
| pci_free_consistent(ar_pci->pdev, orig_nbytes, |
| data_buf, ce_data_base); |
| |
| return ret; |
| } |
| |
| /* Read 4-byte aligned data from Target memory or register */ |
| static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address, |
| u32 *data) |
| { |
| /* Assume range doesn't cross this boundary */ |
| if (address >= DRAM_BASE_ADDRESS) |
| return ath10k_pci_diag_read_mem(ar, address, data, sizeof(u32)); |
| |
| ath10k_pci_wake(ar); |
| *data = ath10k_pci_read32(ar, address); |
| ath10k_pci_sleep(ar); |
| return 0; |
| } |
| |
| static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, |
| const void *data, int nbytes) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret = 0; |
| u32 buf; |
| unsigned int completed_nbytes, orig_nbytes, remaining_bytes; |
| unsigned int id; |
| unsigned int flags; |
| struct ath10k_ce_pipe *ce_diag; |
| void *data_buf = NULL; |
| u32 ce_data; /* Host buffer address in CE space */ |
| dma_addr_t ce_data_base = 0; |
| int i; |
| |
| ce_diag = ar_pci->ce_diag; |
| |
| /* |
| * Allocate a temporary bounce buffer to hold caller's data |
| * to be DMA'ed to Target. This guarantees |
| * 1) 4-byte alignment |
| * 2) Buffer in DMA-able space |
| */ |
| orig_nbytes = nbytes; |
| data_buf = (unsigned char *)pci_alloc_consistent(ar_pci->pdev, |
| orig_nbytes, |
| &ce_data_base); |
| if (!data_buf) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| /* Copy caller's data to allocated DMA buf */ |
| WARN_ON_ONCE(orig_nbytes & 3); |
| for (i = 0; i < orig_nbytes / sizeof(__le32); i++) |
| ((__le32 *)data_buf)[i] = __cpu_to_le32(((u32 *)data)[i]); |
| |
| /* |
| * The address supplied by the caller is in the |
| * Target CPU virtual address space. |
| * |
| * In order to use this address with the diagnostic CE, |
| * convert it from |
| * Target CPU virtual address space |
| * to |
| * CE address space |
| */ |
| ath10k_pci_wake(ar); |
| address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, address); |
| ath10k_pci_sleep(ar); |
| |
| remaining_bytes = orig_nbytes; |
| ce_data = ce_data_base; |
| while (remaining_bytes) { |
| /* FIXME: check cast */ |
| nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT); |
| |
| /* Set up to receive directly into Target(!) address */ |
| ret = ath10k_ce_recv_buf_enqueue(ce_diag, NULL, address); |
| if (ret != 0) |
| goto done; |
| |
| /* |
| * Request CE to send caller-supplied data that |
| * was copied to bounce buffer to Target(!) address. |
| */ |
| ret = ath10k_ce_send(ce_diag, NULL, (u32) ce_data, |
| nbytes, 0, 0); |
| if (ret != 0) |
| goto done; |
| |
| i = 0; |
| while (ath10k_ce_completed_send_next(ce_diag, NULL, &buf, |
| &completed_nbytes, |
| &id) != 0) { |
| mdelay(1); |
| |
| if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| ret = -EBUSY; |
| goto done; |
| } |
| } |
| |
| if (nbytes != completed_nbytes) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| if (buf != ce_data) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| i = 0; |
| while (ath10k_ce_completed_recv_next(ce_diag, NULL, &buf, |
| &completed_nbytes, |
| &id, &flags) != 0) { |
| mdelay(1); |
| |
| if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) { |
| ret = -EBUSY; |
| goto done; |
| } |
| } |
| |
| if (nbytes != completed_nbytes) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| if (buf != address) { |
| ret = -EIO; |
| goto done; |
| } |
| |
| remaining_bytes -= nbytes; |
| address += nbytes; |
| ce_data += nbytes; |
| } |
| |
| done: |
| if (data_buf) { |
| pci_free_consistent(ar_pci->pdev, orig_nbytes, data_buf, |
| ce_data_base); |
| } |
| |
| if (ret != 0) |
| ath10k_dbg(ATH10K_DBG_PCI, "%s failure (0x%x)\n", __func__, |
| address); |
| |
| return ret; |
| } |
| |
| /* Write 4B data to Target memory or register */ |
| static int ath10k_pci_diag_write_access(struct ath10k *ar, u32 address, |
| u32 data) |
| { |
| /* Assume range doesn't cross this boundary */ |
| if (address >= DRAM_BASE_ADDRESS) |
| return ath10k_pci_diag_write_mem(ar, address, &data, |
| sizeof(u32)); |
| |
| ath10k_pci_wake(ar); |
| ath10k_pci_write32(ar, address, data); |
| ath10k_pci_sleep(ar); |
| return 0; |
| } |
| |
| static bool ath10k_pci_target_is_awake(struct ath10k *ar) |
| { |
| void __iomem *mem = ath10k_pci_priv(ar)->mem; |
| u32 val; |
| val = ioread32(mem + PCIE_LOCAL_BASE_ADDRESS + |
| RTC_STATE_ADDRESS); |
| return (RTC_STATE_V_GET(val) == RTC_STATE_V_ON); |
| } |
| |
| int ath10k_do_pci_wake(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| void __iomem *pci_addr = ar_pci->mem; |
| int tot_delay = 0; |
| int curr_delay = 5; |
| |
| if (atomic_read(&ar_pci->keep_awake_count) == 0) { |
| /* Force AWAKE */ |
| iowrite32(PCIE_SOC_WAKE_V_MASK, |
| pci_addr + PCIE_LOCAL_BASE_ADDRESS + |
| PCIE_SOC_WAKE_ADDRESS); |
| } |
| atomic_inc(&ar_pci->keep_awake_count); |
| |
| if (ar_pci->verified_awake) |
| return 0; |
| |
| for (;;) { |
| if (ath10k_pci_target_is_awake(ar)) { |
| ar_pci->verified_awake = true; |
| return 0; |
| } |
| |
| if (tot_delay > PCIE_WAKE_TIMEOUT) { |
| ath10k_warn("target took longer %d us to wake up (awake count %d)\n", |
| PCIE_WAKE_TIMEOUT, |
| atomic_read(&ar_pci->keep_awake_count)); |
| return -ETIMEDOUT; |
| } |
| |
| udelay(curr_delay); |
| tot_delay += curr_delay; |
| |
| if (curr_delay < 50) |
| curr_delay += 5; |
| } |
| } |
| |
| void ath10k_do_pci_sleep(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| void __iomem *pci_addr = ar_pci->mem; |
| |
| if (atomic_dec_and_test(&ar_pci->keep_awake_count)) { |
| /* Allow sleep */ |
| ar_pci->verified_awake = false; |
| iowrite32(PCIE_SOC_WAKE_RESET, |
| pci_addr + PCIE_LOCAL_BASE_ADDRESS + |
| PCIE_SOC_WAKE_ADDRESS); |
| } |
| } |
| |
| /* Called by lower (CE) layer when a send to Target completes. */ |
| static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state) |
| { |
| struct ath10k *ar = ce_state->ar; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current; |
| void *transfer_context; |
| u32 ce_data; |
| unsigned int nbytes; |
| unsigned int transfer_id; |
| |
| while (ath10k_ce_completed_send_next(ce_state, &transfer_context, |
| &ce_data, &nbytes, |
| &transfer_id) == 0) { |
| /* no need to call tx completion for NULL pointers */ |
| if (transfer_context == NULL) |
| continue; |
| |
| cb->tx_completion(ar, transfer_context, transfer_id); |
| } |
| } |
| |
| /* Called by lower (CE) layer when data is received from the Target. */ |
| static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state) |
| { |
| struct ath10k *ar = ce_state->ar; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id]; |
| struct ath10k_hif_cb *cb = &ar_pci->msg_callbacks_current; |
| struct sk_buff *skb; |
| void *transfer_context; |
| u32 ce_data; |
| unsigned int nbytes, max_nbytes; |
| unsigned int transfer_id; |
| unsigned int flags; |
| int err; |
| |
| while (ath10k_ce_completed_recv_next(ce_state, &transfer_context, |
| &ce_data, &nbytes, &transfer_id, |
| &flags) == 0) { |
| err = ath10k_pci_post_rx_pipe(pipe_info, 1); |
| if (unlikely(err)) { |
| /* FIXME: retry */ |
| ath10k_warn("failed to replenish CE rx ring %d: %d\n", |
| pipe_info->pipe_num, err); |
| } |
| |
| skb = transfer_context; |
| max_nbytes = skb->len + skb_tailroom(skb); |
| dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr, |
| max_nbytes, DMA_FROM_DEVICE); |
| |
| if (unlikely(max_nbytes < nbytes)) { |
| ath10k_warn("rxed more than expected (nbytes %d, max %d)", |
| nbytes, max_nbytes); |
| dev_kfree_skb_any(skb); |
| continue; |
| } |
| |
| skb_put(skb, nbytes); |
| cb->rx_completion(ar, skb, pipe_info->pipe_num); |
| } |
| } |
| |
| static int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id, |
| struct ath10k_hif_sg_item *items, int n_items) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_pci_pipe *pci_pipe = &ar_pci->pipe_info[pipe_id]; |
| struct ath10k_ce_pipe *ce_pipe = pci_pipe->ce_hdl; |
| struct ath10k_ce_ring *src_ring = ce_pipe->src_ring; |
| unsigned int nentries_mask = src_ring->nentries_mask; |
| unsigned int sw_index = src_ring->sw_index; |
| unsigned int write_index = src_ring->write_index; |
| int err, i; |
| |
| spin_lock_bh(&ar_pci->ce_lock); |
| |
| if (unlikely(CE_RING_DELTA(nentries_mask, |
| write_index, sw_index - 1) < n_items)) { |
| err = -ENOBUFS; |
| goto unlock; |
| } |
| |
| for (i = 0; i < n_items - 1; i++) { |
| ath10k_dbg(ATH10K_DBG_PCI, |
| "pci tx item %d paddr 0x%08x len %d n_items %d\n", |
| i, items[i].paddr, items[i].len, n_items); |
| ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL, "item data: ", |
| items[i].vaddr, items[i].len); |
| |
| err = ath10k_ce_send_nolock(ce_pipe, |
| items[i].transfer_context, |
| items[i].paddr, |
| items[i].len, |
| items[i].transfer_id, |
| CE_SEND_FLAG_GATHER); |
| if (err) |
| goto unlock; |
| } |
| |
| /* `i` is equal to `n_items -1` after for() */ |
| |
| ath10k_dbg(ATH10K_DBG_PCI, |
| "pci tx item %d paddr 0x%08x len %d n_items %d\n", |
| i, items[i].paddr, items[i].len, n_items); |
| ath10k_dbg_dump(ATH10K_DBG_PCI_DUMP, NULL, "item data: ", |
| items[i].vaddr, items[i].len); |
| |
| err = ath10k_ce_send_nolock(ce_pipe, |
| items[i].transfer_context, |
| items[i].paddr, |
| items[i].len, |
| items[i].transfer_id, |
| 0); |
| if (err) |
| goto unlock; |
| |
| err = 0; |
| unlock: |
| spin_unlock_bh(&ar_pci->ce_lock); |
| return err; |
| } |
| |
| static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| return ath10k_ce_num_free_src_entries(ar_pci->pipe_info[pipe].ce_hdl); |
| } |
| |
| static void ath10k_pci_hif_dump_area(struct ath10k *ar) |
| { |
| u32 reg_dump_area = 0; |
| u32 reg_dump_values[REG_DUMP_COUNT_QCA988X] = {}; |
| u32 host_addr; |
| int ret; |
| u32 i; |
| |
| ath10k_err("firmware crashed!\n"); |
| ath10k_err("hardware name %s version 0x%x\n", |
| ar->hw_params.name, ar->target_version); |
| ath10k_err("firmware version: %s\n", ar->hw->wiphy->fw_version); |
| |
| host_addr = host_interest_item_address(HI_ITEM(hi_failure_state)); |
| ret = ath10k_pci_diag_read_mem(ar, host_addr, |
| ®_dump_area, sizeof(u32)); |
| if (ret) { |
| ath10k_err("failed to read FW dump area address: %d\n", ret); |
| return; |
| } |
| |
| ath10k_err("target register Dump Location: 0x%08X\n", reg_dump_area); |
| |
| ret = ath10k_pci_diag_read_mem(ar, reg_dump_area, |
| ®_dump_values[0], |
| REG_DUMP_COUNT_QCA988X * sizeof(u32)); |
| if (ret != 0) { |
| ath10k_err("failed to read FW dump area: %d\n", ret); |
| return; |
| } |
| |
| BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X % 4); |
| |
| ath10k_err("target Register Dump\n"); |
| for (i = 0; i < REG_DUMP_COUNT_QCA988X; i += 4) |
| ath10k_err("[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n", |
| i, |
| reg_dump_values[i], |
| reg_dump_values[i + 1], |
| reg_dump_values[i + 2], |
| reg_dump_values[i + 3]); |
| |
| queue_work(ar->workqueue, &ar->restart_work); |
| } |
| |
| static void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe, |
| int force) |
| { |
| if (!force) { |
| int resources; |
| /* |
| * Decide whether to actually poll for completions, or just |
| * wait for a later chance. |
| * If there seem to be plenty of resources left, then just wait |
| * since checking involves reading a CE register, which is a |
| * relatively expensive operation. |
| */ |
| resources = ath10k_pci_hif_get_free_queue_number(ar, pipe); |
| |
| /* |
| * If at least 50% of the total resources are still available, |
| * don't bother checking again yet. |
| */ |
| if (resources > (host_ce_config_wlan[pipe].src_nentries >> 1)) |
| return; |
| } |
| ath10k_ce_per_engine_service(ar, pipe); |
| } |
| |
| static void ath10k_pci_hif_set_callbacks(struct ath10k *ar, |
| struct ath10k_hif_cb *callbacks) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| |
| memcpy(&ar_pci->msg_callbacks_current, callbacks, |
| sizeof(ar_pci->msg_callbacks_current)); |
| } |
| |
| static int ath10k_pci_setup_ce_irq(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| const struct ce_attr *attr; |
| struct ath10k_pci_pipe *pipe_info; |
| int pipe_num, disable_interrupts; |
| |
| for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) { |
| pipe_info = &ar_pci->pipe_info[pipe_num]; |
| |
| /* Handle Diagnostic CE specially */ |
| if (pipe_info->ce_hdl == ar_pci->ce_diag) |
| continue; |
| |
| attr = &host_ce_config_wlan[pipe_num]; |
| |
| if (attr->src_nentries) { |
| disable_interrupts = attr->flags & CE_ATTR_DIS_INTR; |
| ath10k_ce_send_cb_register(pipe_info->ce_hdl, |
| ath10k_pci_ce_send_done, |
| disable_interrupts); |
| } |
| |
| if (attr->dest_nentries) |
| ath10k_ce_recv_cb_register(pipe_info->ce_hdl, |
| ath10k_pci_ce_recv_data); |
| } |
| |
| return 0; |
| } |
| |
| static void ath10k_pci_kill_tasklet(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int i; |
| |
| tasklet_kill(&ar_pci->intr_tq); |
| tasklet_kill(&ar_pci->msi_fw_err); |
| tasklet_kill(&ar_pci->early_irq_tasklet); |
| |
| for (i = 0; i < CE_COUNT; i++) |
| tasklet_kill(&ar_pci->pipe_info[i].intr); |
| } |
| |
| /* TODO - temporary mapping while we have too few CE's */ |
| static int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, |
| u16 service_id, u8 *ul_pipe, |
| u8 *dl_pipe, int *ul_is_polled, |
| int *dl_is_polled) |
| { |
| int ret = 0; |
| |
| /* polling for received messages not supported */ |
| *dl_is_polled = 0; |
| |
| switch (service_id) { |
| case ATH10K_HTC_SVC_ID_HTT_DATA_MSG: |
| /* |
| * Host->target HTT gets its own pipe, so it can be polled |
| * while other pipes are interrupt driven. |
| */ |
| *ul_pipe = 4; |
| /* |
| * Use the same target->host pipe for HTC ctrl, HTC raw |
| * streams, and HTT. |
| */ |
| *dl_pipe = 1; |
| break; |
| |
| case ATH10K_HTC_SVC_ID_RSVD_CTRL: |
| case ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS: |
| /* |
| * Note: HTC_RAW_STREAMS_SVC is currently unused, and |
| * HTC_CTRL_RSVD_SVC could share the same pipe as the |
| * WMI services. So, if another CE is needed, change |
| * this to *ul_pipe = 3, which frees up CE 0. |
| */ |
| /* *ul_pipe = 3; */ |
| *ul_pipe = 0; |
| *dl_pipe = 1; |
| break; |
| |
| case ATH10K_HTC_SVC_ID_WMI_DATA_BK: |
| case ATH10K_HTC_SVC_ID_WMI_DATA_BE: |
| case ATH10K_HTC_SVC_ID_WMI_DATA_VI: |
| case ATH10K_HTC_SVC_ID_WMI_DATA_VO: |
| |
| case ATH10K_HTC_SVC_ID_WMI_CONTROL: |
| *ul_pipe = 3; |
| *dl_pipe = 2; |
| break; |
| |
| /* pipe 5 unused */ |
| /* pipe 6 reserved */ |
| /* pipe 7 reserved */ |
| |
| default: |
| ret = -1; |
| break; |
| } |
| *ul_is_polled = |
| (host_ce_config_wlan[*ul_pipe].flags & CE_ATTR_DIS_INTR) != 0; |
| |
| return ret; |
| } |
| |
| static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar, |
| u8 *ul_pipe, u8 *dl_pipe) |
| { |
| int ul_is_polled, dl_is_polled; |
| |
| (void)ath10k_pci_hif_map_service_to_pipe(ar, |
| ATH10K_HTC_SVC_ID_RSVD_CTRL, |
| ul_pipe, |
| dl_pipe, |
| &ul_is_polled, |
| &dl_is_polled); |
| } |
| |
| static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info, |
| int num) |
| { |
| struct ath10k *ar = pipe_info->hif_ce_state; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_ce_pipe *ce_state = pipe_info->ce_hdl; |
| struct sk_buff *skb; |
| dma_addr_t ce_data; |
| int i, ret = 0; |
| |
| if (pipe_info->buf_sz == 0) |
| return 0; |
| |
| for (i = 0; i < num; i++) { |
| skb = dev_alloc_skb(pipe_info->buf_sz); |
| if (!skb) { |
| ath10k_warn("failed to allocate skbuff for pipe %d\n", |
| num); |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| WARN_ONCE((unsigned long)skb->data & 3, "unaligned skb"); |
| |
| ce_data = dma_map_single(ar->dev, skb->data, |
| skb->len + skb_tailroom(skb), |
| DMA_FROM_DEVICE); |
| |
| if (unlikely(dma_mapping_error(ar->dev, ce_data))) { |
| ath10k_warn("failed to DMA map sk_buff\n"); |
| dev_kfree_skb_any(skb); |
| ret = -EIO; |
| goto err; |
| } |
| |
| ATH10K_SKB_CB(skb)->paddr = ce_data; |
| |
| pci_dma_sync_single_for_device(ar_pci->pdev, ce_data, |
| pipe_info->buf_sz, |
| PCI_DMA_FROMDEVICE); |
| |
| ret = ath10k_ce_recv_buf_enqueue(ce_state, (void *)skb, |
| ce_data); |
| if (ret) { |
| ath10k_warn("failed to enqueue to pipe %d: %d\n", |
| num, ret); |
| goto err; |
| } |
| } |
| |
| return ret; |
| |
| err: |
| ath10k_pci_rx_pipe_cleanup(pipe_info); |
| return ret; |
| } |
| |
| static int ath10k_pci_post_rx(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_pci_pipe *pipe_info; |
| const struct ce_attr *attr; |
| int pipe_num, ret = 0; |
| |
| for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) { |
| pipe_info = &ar_pci->pipe_info[pipe_num]; |
| attr = &host_ce_config_wlan[pipe_num]; |
| |
| if (attr->dest_nentries == 0) |
| continue; |
| |
| ret = ath10k_pci_post_rx_pipe(pipe_info, |
| attr->dest_nentries - 1); |
| if (ret) { |
| ath10k_warn("failed to post RX buffer for pipe %d: %d\n", |
| pipe_num, ret); |
| |
| for (; pipe_num >= 0; pipe_num--) { |
| pipe_info = &ar_pci->pipe_info[pipe_num]; |
| ath10k_pci_rx_pipe_cleanup(pipe_info); |
| } |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_hif_start(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret, ret_early; |
| |
| ath10k_pci_free_early_irq(ar); |
| ath10k_pci_kill_tasklet(ar); |
| |
| ret = ath10k_pci_request_irq(ar); |
| if (ret) { |
| ath10k_warn("failed to post RX buffers for all pipes: %d\n", |
| ret); |
| goto err_early_irq; |
| } |
| |
| ret = ath10k_pci_setup_ce_irq(ar); |
| if (ret) { |
| ath10k_warn("failed to setup CE interrupts: %d\n", ret); |
| goto err_stop; |
| } |
| |
| /* Post buffers once to start things off. */ |
| ret = ath10k_pci_post_rx(ar); |
| if (ret) { |
| ath10k_warn("failed to post RX buffers for all pipes: %d\n", |
| ret); |
| goto err_stop; |
| } |
| |
| ar_pci->started = 1; |
| return 0; |
| |
| err_stop: |
| ath10k_ce_disable_interrupts(ar); |
| ath10k_pci_free_irq(ar); |
| ath10k_pci_kill_tasklet(ar); |
| err_early_irq: |
| /* Though there should be no interrupts (device was reset) |
| * power_down() expects the early IRQ to be installed as per the |
| * driver lifecycle. */ |
| ret_early = ath10k_pci_request_early_irq(ar); |
| if (ret_early) |
| ath10k_warn("failed to re-enable early irq: %d\n", ret_early); |
| |
| return ret; |
| } |
| |
| static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) |
| { |
| struct ath10k *ar; |
| struct ath10k_pci *ar_pci; |
| struct ath10k_ce_pipe *ce_hdl; |
| u32 buf_sz; |
| struct sk_buff *netbuf; |
| u32 ce_data; |
| |
| buf_sz = pipe_info->buf_sz; |
| |
| /* Unused Copy Engine */ |
| if (buf_sz == 0) |
| return; |
| |
| ar = pipe_info->hif_ce_state; |
| ar_pci = ath10k_pci_priv(ar); |
| |
| if (!ar_pci->started) |
| return; |
| |
| ce_hdl = pipe_info->ce_hdl; |
| |
| while (ath10k_ce_revoke_recv_next(ce_hdl, (void **)&netbuf, |
| &ce_data) == 0) { |
| dma_unmap_single(ar->dev, ATH10K_SKB_CB(netbuf)->paddr, |
| netbuf->len + skb_tailroom(netbuf), |
| DMA_FROM_DEVICE); |
| dev_kfree_skb_any(netbuf); |
| } |
| } |
| |
| static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) |
| { |
| struct ath10k *ar; |
| struct ath10k_pci *ar_pci; |
| struct ath10k_ce_pipe *ce_hdl; |
| struct sk_buff *netbuf; |
| u32 ce_data; |
| unsigned int nbytes; |
| unsigned int id; |
| u32 buf_sz; |
| |
| buf_sz = pipe_info->buf_sz; |
| |
| /* Unused Copy Engine */ |
| if (buf_sz == 0) |
| return; |
| |
| ar = pipe_info->hif_ce_state; |
| ar_pci = ath10k_pci_priv(ar); |
| |
| if (!ar_pci->started) |
| return; |
| |
| ce_hdl = pipe_info->ce_hdl; |
| |
| while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf, |
| &ce_data, &nbytes, &id) == 0) { |
| /* no need to call tx completion for NULL pointers */ |
| if (!netbuf) |
| continue; |
| |
| ar_pci->msg_callbacks_current.tx_completion(ar, |
| netbuf, |
| id); |
| } |
| } |
| |
| /* |
| * Cleanup residual buffers for device shutdown: |
| * buffers that were enqueued for receive |
| * buffers that were to be sent |
| * Note: Buffers that had completed but which were |
| * not yet processed are on a completion queue. They |
| * are handled when the completion thread shuts down. |
| */ |
| static void ath10k_pci_buffer_cleanup(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int pipe_num; |
| |
| for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) { |
| struct ath10k_pci_pipe *pipe_info; |
| |
| pipe_info = &ar_pci->pipe_info[pipe_num]; |
| ath10k_pci_rx_pipe_cleanup(pipe_info); |
| ath10k_pci_tx_pipe_cleanup(pipe_info); |
| } |
| } |
| |
| static void ath10k_pci_ce_deinit(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_pci_pipe *pipe_info; |
| int pipe_num; |
| |
| for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) { |
| pipe_info = &ar_pci->pipe_info[pipe_num]; |
| if (pipe_info->ce_hdl) { |
| ath10k_ce_deinit(pipe_info->ce_hdl); |
| pipe_info->ce_hdl = NULL; |
| pipe_info->buf_sz = 0; |
| } |
| } |
| } |
| |
| static void ath10k_pci_hif_stop(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret; |
| |
| ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| |
| ret = ath10k_ce_disable_interrupts(ar); |
| if (ret) |
| ath10k_warn("failed to disable CE interrupts: %d\n", ret); |
| |
| ath10k_pci_free_irq(ar); |
| ath10k_pci_kill_tasklet(ar); |
| |
| ret = ath10k_pci_request_early_irq(ar); |
| if (ret) |
| ath10k_warn("failed to re-enable early irq: %d\n", ret); |
| |
| /* At this point, asynchronous threads are stopped, the target should |
| * not DMA nor interrupt. We process the leftovers and then free |
| * everything else up. */ |
| |
| ath10k_pci_buffer_cleanup(ar); |
| |
| /* Make the sure the device won't access any structures on the host by |
| * resetting it. The device was fed with PCI CE ringbuffer |
| * configuration during init. If ringbuffers are freed and the device |
| * were to access them this could lead to memory corruption on the |
| * host. */ |
| ath10k_pci_warm_reset(ar); |
| |
| ar_pci->started = 0; |
| } |
| |
| static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, |
| void *req, u32 req_len, |
| void *resp, u32 *resp_len) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_pci_pipe *pci_tx = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG]; |
| struct ath10k_pci_pipe *pci_rx = &ar_pci->pipe_info[BMI_CE_NUM_TO_HOST]; |
| struct ath10k_ce_pipe *ce_tx = pci_tx->ce_hdl; |
| struct ath10k_ce_pipe *ce_rx = pci_rx->ce_hdl; |
| dma_addr_t req_paddr = 0; |
| dma_addr_t resp_paddr = 0; |
| struct bmi_xfer xfer = {}; |
| void *treq, *tresp = NULL; |
| int ret = 0; |
| |
| might_sleep(); |
| |
| if (resp && !resp_len) |
| return -EINVAL; |
| |
| if (resp && resp_len && *resp_len == 0) |
| return -EINVAL; |
| |
| treq = kmemdup(req, req_len, GFP_KERNEL); |
| if (!treq) |
| return -ENOMEM; |
| |
| req_paddr = dma_map_single(ar->dev, treq, req_len, DMA_TO_DEVICE); |
| ret = dma_mapping_error(ar->dev, req_paddr); |
| if (ret) |
| goto err_dma; |
| |
| if (resp && resp_len) { |
| tresp = kzalloc(*resp_len, GFP_KERNEL); |
| if (!tresp) { |
| ret = -ENOMEM; |
| goto err_req; |
| } |
| |
| resp_paddr = dma_map_single(ar->dev, tresp, *resp_len, |
| DMA_FROM_DEVICE); |
| ret = dma_mapping_error(ar->dev, resp_paddr); |
| if (ret) |
| goto err_req; |
| |
| xfer.wait_for_resp = true; |
| xfer.resp_len = 0; |
| |
| ath10k_ce_recv_buf_enqueue(ce_rx, &xfer, resp_paddr); |
| } |
| |
| init_completion(&xfer.done); |
| |
| ret = ath10k_ce_send(ce_tx, &xfer, req_paddr, req_len, -1, 0); |
| if (ret) |
| goto err_resp; |
| |
| ret = ath10k_pci_bmi_wait(ce_tx, ce_rx, &xfer); |
| if (ret) { |
| u32 unused_buffer; |
| unsigned int unused_nbytes; |
| unsigned int unused_id; |
| |
| ath10k_ce_cancel_send_next(ce_tx, NULL, &unused_buffer, |
| &unused_nbytes, &unused_id); |
| } else { |
| /* non-zero means we did not time out */ |
| ret = 0; |
| } |
| |
| err_resp: |
| if (resp) { |
| u32 unused_buffer; |
| |
| ath10k_ce_revoke_recv_next(ce_rx, NULL, &unused_buffer); |
| dma_unmap_single(ar->dev, resp_paddr, |
| *resp_len, DMA_FROM_DEVICE); |
| } |
| err_req: |
| dma_unmap_single(ar->dev, req_paddr, req_len, DMA_TO_DEVICE); |
| |
| if (ret == 0 && resp_len) { |
| *resp_len = min(*resp_len, xfer.resp_len); |
| memcpy(resp, tresp, xfer.resp_len); |
| } |
| err_dma: |
| kfree(treq); |
| kfree(tresp); |
| |
| return ret; |
| } |
| |
| static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state) |
| { |
| struct bmi_xfer *xfer; |
| u32 ce_data; |
| unsigned int nbytes; |
| unsigned int transfer_id; |
| |
| if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data, |
| &nbytes, &transfer_id)) |
| return; |
| |
| if (xfer->wait_for_resp) |
| return; |
| |
| complete(&xfer->done); |
| } |
| |
| static void ath10k_pci_bmi_recv_data(struct ath10k_ce_pipe *ce_state) |
| { |
| struct bmi_xfer *xfer; |
| u32 ce_data; |
| unsigned int nbytes; |
| unsigned int transfer_id; |
| unsigned int flags; |
| |
| if (ath10k_ce_completed_recv_next(ce_state, (void **)&xfer, &ce_data, |
| &nbytes, &transfer_id, &flags)) |
| return; |
| |
| if (!xfer->wait_for_resp) { |
| ath10k_warn("unexpected: BMI data received; ignoring\n"); |
| return; |
| } |
| |
| xfer->resp_len = nbytes; |
| complete(&xfer->done); |
| } |
| |
| static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe, |
| struct ath10k_ce_pipe *rx_pipe, |
| struct bmi_xfer *xfer) |
| { |
| unsigned long timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ; |
| |
| while (time_before_eq(jiffies, timeout)) { |
| ath10k_pci_bmi_send_done(tx_pipe); |
| ath10k_pci_bmi_recv_data(rx_pipe); |
| |
| if (completion_done(&xfer->done)) |
| return 0; |
| |
| schedule(); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| /* |
| * Map from service/endpoint to Copy Engine. |
| * This table is derived from the CE_PCI TABLE, above. |
| * It is passed to the Target at startup for use by firmware. |
| */ |
| static const struct service_to_pipe target_service_to_ce_map_wlan[] = { |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_VO, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 3, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_VO, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 2, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_BK, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 3, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_BK, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 2, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_BE, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 3, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_BE, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 2, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_VI, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 3, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_DATA_VI, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 2, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_CONTROL, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 3, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_WMI_CONTROL, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 2, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_RSVD_CTRL, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 0, /* could be moved to 3 (share with WMI) */ |
| }, |
| { |
| ATH10K_HTC_SVC_ID_RSVD_CTRL, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 1, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS, /* not currently used */ |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 0, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS, /* not currently used */ |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 1, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_HTT_DATA_MSG, |
| PIPEDIR_OUT, /* out = UL = host -> target */ |
| 4, |
| }, |
| { |
| ATH10K_HTC_SVC_ID_HTT_DATA_MSG, |
| PIPEDIR_IN, /* in = DL = target -> host */ |
| 1, |
| }, |
| |
| /* (Additions here) */ |
| |
| { /* Must be last */ |
| 0, |
| 0, |
| 0, |
| }, |
| }; |
| |
| /* |
| * Send an interrupt to the device to wake up the Target CPU |
| * so it has an opportunity to notice any changed state. |
| */ |
| static int ath10k_pci_wake_target_cpu(struct ath10k *ar) |
| { |
| int ret; |
| u32 core_ctrl; |
| |
| ret = ath10k_pci_diag_read_access(ar, SOC_CORE_BASE_ADDRESS | |
| CORE_CTRL_ADDRESS, |
| &core_ctrl); |
| if (ret) { |
| ath10k_warn("failed to read core_ctrl: %d\n", ret); |
| return ret; |
| } |
| |
| /* A_INUM_FIRMWARE interrupt to Target CPU */ |
| core_ctrl |= CORE_CTRL_CPU_INTR_MASK; |
| |
| ret = ath10k_pci_diag_write_access(ar, SOC_CORE_BASE_ADDRESS | |
| CORE_CTRL_ADDRESS, |
| core_ctrl); |
| if (ret) { |
| ath10k_warn("failed to set target CPU interrupt mask: %d\n", |
| ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_init_config(struct ath10k *ar) |
| { |
| u32 interconnect_targ_addr; |
| u32 pcie_state_targ_addr = 0; |
| u32 pipe_cfg_targ_addr = 0; |
| u32 svc_to_pipe_map = 0; |
| u32 pcie_config_flags = 0; |
| u32 ealloc_value; |
| u32 ealloc_targ_addr; |
| u32 flag2_value; |
| u32 flag2_targ_addr; |
| int ret = 0; |
| |
| /* Download to Target the CE Config and the service-to-CE map */ |
| interconnect_targ_addr = |
| host_interest_item_address(HI_ITEM(hi_interconnect_state)); |
| |
| /* Supply Target-side CE configuration */ |
| ret = ath10k_pci_diag_read_access(ar, interconnect_targ_addr, |
| &pcie_state_targ_addr); |
| if (ret != 0) { |
| ath10k_err("Failed to get pcie state addr: %d\n", ret); |
| return ret; |
| } |
| |
| if (pcie_state_targ_addr == 0) { |
| ret = -EIO; |
| ath10k_err("Invalid pcie state addr\n"); |
| return ret; |
| } |
| |
| ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr + |
| offsetof(struct pcie_state, |
| pipe_cfg_addr), |
| &pipe_cfg_targ_addr); |
| if (ret != 0) { |
| ath10k_err("Failed to get pipe cfg addr: %d\n", ret); |
| return ret; |
| } |
| |
| if (pipe_cfg_targ_addr == 0) { |
| ret = -EIO; |
| ath10k_err("Invalid pipe cfg addr\n"); |
| return ret; |
| } |
| |
| ret = ath10k_pci_diag_write_mem(ar, pipe_cfg_targ_addr, |
| target_ce_config_wlan, |
| sizeof(target_ce_config_wlan)); |
| |
| if (ret != 0) { |
| ath10k_err("Failed to write pipe cfg: %d\n", ret); |
| return ret; |
| } |
| |
| ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr + |
| offsetof(struct pcie_state, |
| svc_to_pipe_map), |
| &svc_to_pipe_map); |
| if (ret != 0) { |
| ath10k_err("Failed to get svc/pipe map: %d\n", ret); |
| return ret; |
| } |
| |
| if (svc_to_pipe_map == 0) { |
| ret = -EIO; |
| ath10k_err("Invalid svc_to_pipe map\n"); |
| return ret; |
| } |
| |
| ret = ath10k_pci_diag_write_mem(ar, svc_to_pipe_map, |
| target_service_to_ce_map_wlan, |
| sizeof(target_service_to_ce_map_wlan)); |
| if (ret != 0) { |
| ath10k_err("Failed to write svc/pipe map: %d\n", ret); |
| return ret; |
| } |
| |
| ret = ath10k_pci_diag_read_access(ar, pcie_state_targ_addr + |
| offsetof(struct pcie_state, |
| config_flags), |
| &pcie_config_flags); |
| if (ret != 0) { |
| ath10k_err("Failed to get pcie config_flags: %d\n", ret); |
| return ret; |
| } |
| |
| pcie_config_flags &= ~PCIE_CONFIG_FLAG_ENABLE_L1; |
| |
| ret = ath10k_pci_diag_write_mem(ar, pcie_state_targ_addr + |
| offsetof(struct pcie_state, config_flags), |
| &pcie_config_flags, |
| sizeof(pcie_config_flags)); |
| if (ret != 0) { |
| ath10k_err("Failed to write pcie config_flags: %d\n", ret); |
| return ret; |
| } |
| |
| /* configure early allocation */ |
| ealloc_targ_addr = host_interest_item_address(HI_ITEM(hi_early_alloc)); |
| |
| ret = ath10k_pci_diag_read_access(ar, ealloc_targ_addr, &ealloc_value); |
| if (ret != 0) { |
| ath10k_err("Faile to get early alloc val: %d\n", ret); |
| return ret; |
| } |
| |
| /* first bank is switched to IRAM */ |
| ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) & |
| HI_EARLY_ALLOC_MAGIC_MASK); |
| ealloc_value |= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) & |
| HI_EARLY_ALLOC_IRAM_BANKS_MASK); |
| |
| ret = ath10k_pci_diag_write_access(ar, ealloc_targ_addr, ealloc_value); |
| if (ret != 0) { |
| ath10k_err("Failed to set early alloc val: %d\n", ret); |
| return ret; |
| } |
| |
| /* Tell Target to proceed with initialization */ |
| flag2_targ_addr = host_interest_item_address(HI_ITEM(hi_option_flag2)); |
| |
| ret = ath10k_pci_diag_read_access(ar, flag2_targ_addr, &flag2_value); |
| if (ret != 0) { |
| ath10k_err("Failed to get option val: %d\n", ret); |
| return ret; |
| } |
| |
| flag2_value |= HI_OPTION_EARLY_CFG_DONE; |
| |
| ret = ath10k_pci_diag_write_access(ar, flag2_targ_addr, flag2_value); |
| if (ret != 0) { |
| ath10k_err("Failed to set option val: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| |
| static int ath10k_pci_ce_init(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct ath10k_pci_pipe *pipe_info; |
| const struct ce_attr *attr; |
| int pipe_num; |
| |
| for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) { |
| pipe_info = &ar_pci->pipe_info[pipe_num]; |
| pipe_info->pipe_num = pipe_num; |
| pipe_info->hif_ce_state = ar; |
| attr = &host_ce_config_wlan[pipe_num]; |
| |
| pipe_info->ce_hdl = ath10k_ce_init(ar, pipe_num, attr); |
| if (pipe_info->ce_hdl == NULL) { |
| ath10k_err("failed to initialize CE for pipe: %d\n", |
| pipe_num); |
| |
| /* It is safe to call it here. It checks if ce_hdl is |
| * valid for each pipe */ |
| ath10k_pci_ce_deinit(ar); |
| return -1; |
| } |
| |
| if (pipe_num == CE_COUNT - 1) { |
| /* |
| * Reserve the ultimate CE for |
| * diagnostic Window support |
| */ |
| ar_pci->ce_diag = pipe_info->ce_hdl; |
| continue; |
| } |
| |
| pipe_info->buf_sz = (size_t) (attr->src_sz_max); |
| } |
| |
| return 0; |
| } |
| |
| static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| u32 fw_indicator_address, fw_indicator; |
| |
| ath10k_pci_wake(ar); |
| |
| fw_indicator_address = ar_pci->fw_indicator_address; |
| fw_indicator = ath10k_pci_read32(ar, fw_indicator_address); |
| |
| if (fw_indicator & FW_IND_EVENT_PENDING) { |
| /* ACK: clear Target-side pending event */ |
| ath10k_pci_write32(ar, fw_indicator_address, |
| fw_indicator & ~FW_IND_EVENT_PENDING); |
| |
| if (ar_pci->started) { |
| ath10k_pci_hif_dump_area(ar); |
| } else { |
| /* |
| * Probable Target failure before we're prepared |
| * to handle it. Generally unexpected. |
| */ |
| ath10k_warn("early firmware event indicated\n"); |
| } |
| } |
| |
| ath10k_pci_sleep(ar); |
| } |
| |
| static int ath10k_pci_warm_reset(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret = 0; |
| u32 val; |
| |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot performing warm chip reset\n"); |
| |
| ret = ath10k_do_pci_wake(ar); |
| if (ret) { |
| ath10k_err("failed to wake up target: %d\n", ret); |
| return ret; |
| } |
| |
| /* debug */ |
| val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_CAUSE_ADDRESS); |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n", val); |
| |
| val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| CPU_INTR_ADDRESS); |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n", |
| val); |
| |
| /* disable pending irqs */ |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_ENABLE_ADDRESS, 0); |
| |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_CLR_ADDRESS, ~0); |
| |
| msleep(100); |
| |
| /* clear fw indicator */ |
| ath10k_pci_write32(ar, ar_pci->fw_indicator_address, 0); |
| |
| /* clear target LF timer interrupts */ |
| val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_LF_TIMER_CONTROL0_ADDRESS); |
| ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_LF_TIMER_CONTROL0_ADDRESS, |
| val & ~SOC_LF_TIMER_CONTROL0_ENABLE_MASK); |
| |
| /* reset CE */ |
| val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_RESET_CONTROL_ADDRESS); |
| ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS, |
| val | SOC_RESET_CONTROL_CE_RST_MASK); |
| val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_RESET_CONTROL_ADDRESS); |
| msleep(10); |
| |
| /* unreset CE */ |
| ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS, |
| val & ~SOC_RESET_CONTROL_CE_RST_MASK); |
| val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_RESET_CONTROL_ADDRESS); |
| msleep(10); |
| |
| /* debug */ |
| val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| PCIE_INTR_CAUSE_ADDRESS); |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n", val); |
| |
| val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + |
| CPU_INTR_ADDRESS); |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n", |
| val); |
| |
| /* CPU warm reset */ |
| val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_RESET_CONTROL_ADDRESS); |
| ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS, |
| val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK); |
| |
| val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + |
| SOC_RESET_CONTROL_ADDRESS); |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot target reset state: 0x%08x\n", val); |
| |
| msleep(100); |
| |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot warm reset complete\n"); |
| |
| ath10k_do_pci_sleep(ar); |
| return ret; |
| } |
| |
| static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| const char *irq_mode; |
| int ret; |
| |
| /* |
| * Bring the target up cleanly. |
| * |
| * The target may be in an undefined state with an AUX-powered Target |
| * and a Host in WoW mode. If the Host crashes, loses power, or is |
| * restarted (without unloading the driver) then the Target is left |
| * (aux) powered and running. On a subsequent driver load, the Target |
| * is in an unexpected state. We try to catch that here in order to |
| * reset the Target and retry the probe. |
| */ |
| if (cold_reset) |
| ret = ath10k_pci_cold_reset(ar); |
| else |
| ret = ath10k_pci_warm_reset(ar); |
| |
| if (ret) { |
| ath10k_err("failed to reset target: %d\n", ret); |
| goto err; |
| } |
| |
| if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) |
| /* Force AWAKE forever */ |
| ath10k_do_pci_wake(ar); |
| |
| ret = ath10k_pci_ce_init(ar); |
| if (ret) { |
| ath10k_err("failed to initialize CE: %d\n", ret); |
| goto err_ps; |
| } |
| |
| ret = ath10k_ce_disable_interrupts(ar); |
| if (ret) { |
| ath10k_err("failed to disable CE interrupts: %d\n", ret); |
| goto err_ce; |
| } |
| |
| ret = ath10k_pci_init_irq(ar); |
| if (ret) { |
| ath10k_err("failed to init irqs: %d\n", ret); |
| goto err_ce; |
| } |
| |
| ret = ath10k_pci_request_early_irq(ar); |
| if (ret) { |
| ath10k_err("failed to request early irq: %d\n", ret); |
| goto err_deinit_irq; |
| } |
| |
| ret = ath10k_pci_wait_for_target_init(ar); |
| if (ret) { |
| ath10k_err("failed to wait for target to init: %d\n", ret); |
| goto err_free_early_irq; |
| } |
| |
| ret = ath10k_pci_init_config(ar); |
| if (ret) { |
| ath10k_err("failed to setup init config: %d\n", ret); |
| goto err_free_early_irq; |
| } |
| |
| ret = ath10k_pci_wake_target_cpu(ar); |
| if (ret) { |
| ath10k_err("could not wake up target CPU: %d\n", ret); |
| goto err_free_early_irq; |
| } |
| |
| if (ar_pci->num_msi_intrs > 1) |
| irq_mode = "MSI-X"; |
| else if (ar_pci->num_msi_intrs == 1) |
| irq_mode = "MSI"; |
| else |
| irq_mode = "legacy"; |
| |
| if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags)) |
| ath10k_info("pci irq %s\n", irq_mode); |
| |
| return 0; |
| |
| err_free_early_irq: |
| ath10k_pci_free_early_irq(ar); |
| err_deinit_irq: |
| ath10k_pci_deinit_irq(ar); |
| err_ce: |
| ath10k_pci_ce_deinit(ar); |
| ath10k_pci_warm_reset(ar); |
| err_ps: |
| if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) |
| ath10k_do_pci_sleep(ar); |
| err: |
| return ret; |
| } |
| |
| static int ath10k_pci_hif_power_up(struct ath10k *ar) |
| { |
| int ret; |
| |
| /* |
| * Hardware CUS232 version 2 has some issues with cold reset and the |
| * preferred (and safer) way to perform a device reset is through a |
| * warm reset. |
| * |
| * Warm reset doesn't always work though (notably after a firmware |
| * crash) so fall back to cold reset if necessary. |
| */ |
| ret = __ath10k_pci_hif_power_up(ar, false); |
| if (ret) { |
| ath10k_warn("failed to power up target using warm reset (%d), trying cold reset\n", |
| ret); |
| |
| ret = __ath10k_pci_hif_power_up(ar, true); |
| if (ret) { |
| ath10k_err("failed to power up target using cold reset too (%d)\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void ath10k_pci_hif_power_down(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| ath10k_pci_free_early_irq(ar); |
| ath10k_pci_kill_tasklet(ar); |
| ath10k_pci_deinit_irq(ar); |
| ath10k_pci_warm_reset(ar); |
| |
| ath10k_pci_ce_deinit(ar); |
| if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) |
| ath10k_do_pci_sleep(ar); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| #define ATH10K_PCI_PM_CONTROL 0x44 |
| |
| static int ath10k_pci_hif_suspend(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct pci_dev *pdev = ar_pci->pdev; |
| u32 val; |
| |
| pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val); |
| |
| if ((val & 0x000000ff) != 0x3) { |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL, |
| (val & 0xffffff00) | 0x03); |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_hif_resume(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| struct pci_dev *pdev = ar_pci->pdev; |
| u32 val; |
| |
| pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val); |
| |
| if ((val & 0x000000ff) != 0) { |
| pci_restore_state(pdev); |
| pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL, |
| val & 0xffffff00); |
| /* |
| * Suspend/Resume resets the PCI configuration space, |
| * so we have to re-disable the RETRY_TIMEOUT register (0x41) |
| * to keep PCI Tx retries from interfering with C3 CPU state |
| */ |
| pci_read_config_dword(pdev, 0x40, &val); |
| |
| if ((val & 0x0000ff00) != 0) |
| pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct ath10k_hif_ops ath10k_pci_hif_ops = { |
| .tx_sg = ath10k_pci_hif_tx_sg, |
| .exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg, |
| .start = ath10k_pci_hif_start, |
| .stop = ath10k_pci_hif_stop, |
| .map_service_to_pipe = ath10k_pci_hif_map_service_to_pipe, |
| .get_default_pipe = ath10k_pci_hif_get_default_pipe, |
| .send_complete_check = ath10k_pci_hif_send_complete_check, |
| .set_callbacks = ath10k_pci_hif_set_callbacks, |
| .get_free_queue_number = ath10k_pci_hif_get_free_queue_number, |
| .power_up = ath10k_pci_hif_power_up, |
| .power_down = ath10k_pci_hif_power_down, |
| #ifdef CONFIG_PM |
| .suspend = ath10k_pci_hif_suspend, |
| .resume = ath10k_pci_hif_resume, |
| #endif |
| }; |
| |
| static void ath10k_pci_ce_tasklet(unsigned long ptr) |
| { |
| struct ath10k_pci_pipe *pipe = (struct ath10k_pci_pipe *)ptr; |
| struct ath10k_pci *ar_pci = pipe->ar_pci; |
| |
| ath10k_ce_per_engine_service(ar_pci->ar, pipe->pipe_num); |
| } |
| |
| static void ath10k_msi_err_tasklet(unsigned long data) |
| { |
| struct ath10k *ar = (struct ath10k *)data; |
| |
| ath10k_pci_fw_interrupt_handler(ar); |
| } |
| |
| /* |
| * Handler for a per-engine interrupt on a PARTICULAR CE. |
| * This is used in cases where each CE has a private MSI interrupt. |
| */ |
| static irqreturn_t ath10k_pci_per_engine_handler(int irq, void *arg) |
| { |
| struct ath10k *ar = arg; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ce_id = irq - ar_pci->pdev->irq - MSI_ASSIGN_CE_INITIAL; |
| |
| if (ce_id < 0 || ce_id >= ARRAY_SIZE(ar_pci->pipe_info)) { |
| ath10k_warn("unexpected/invalid irq %d ce_id %d\n", irq, ce_id); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * NOTE: We are able to derive ce_id from irq because we |
| * use a one-to-one mapping for CE's 0..5. |
| * CE's 6 & 7 do not use interrupts at all. |
| * |
| * This mapping must be kept in sync with the mapping |
| * used by firmware. |
| */ |
| tasklet_schedule(&ar_pci->pipe_info[ce_id].intr); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ath10k_pci_msi_fw_handler(int irq, void *arg) |
| { |
| struct ath10k *ar = arg; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| tasklet_schedule(&ar_pci->msi_fw_err); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Top-level interrupt handler for all PCI interrupts from a Target. |
| * When a block of MSI interrupts is allocated, this top-level handler |
| * is not used; instead, we directly call the correct sub-handler. |
| */ |
| static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg) |
| { |
| struct ath10k *ar = arg; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| if (ar_pci->num_msi_intrs == 0) { |
| if (!ath10k_pci_irq_pending(ar)) |
| return IRQ_NONE; |
| |
| ath10k_pci_disable_and_clear_legacy_irq(ar); |
| } |
| |
| tasklet_schedule(&ar_pci->intr_tq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void ath10k_pci_early_irq_tasklet(unsigned long data) |
| { |
| struct ath10k *ar = (struct ath10k *)data; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| u32 fw_ind; |
| int ret; |
| |
| ret = ath10k_pci_wake(ar); |
| if (ret) { |
| ath10k_warn("failed to wake target in early irq tasklet: %d\n", |
| ret); |
| return; |
| } |
| |
| fw_ind = ath10k_pci_read32(ar, ar_pci->fw_indicator_address); |
| if (fw_ind & FW_IND_EVENT_PENDING) { |
| ath10k_pci_write32(ar, ar_pci->fw_indicator_address, |
| fw_ind & ~FW_IND_EVENT_PENDING); |
| |
| /* Some structures are unavailable during early boot or at |
| * driver teardown so just print that the device has crashed. */ |
| ath10k_warn("device crashed - no diagnostics available\n"); |
| } |
| |
| ath10k_pci_sleep(ar); |
| ath10k_pci_enable_legacy_irq(ar); |
| } |
| |
| static void ath10k_pci_tasklet(unsigned long data) |
| { |
| struct ath10k *ar = (struct ath10k *)data; |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| ath10k_pci_fw_interrupt_handler(ar); /* FIXME: Handle FW error */ |
| ath10k_ce_per_engine_service_any(ar); |
| |
| /* Re-enable legacy irq that was disabled in the irq handler */ |
| if (ar_pci->num_msi_intrs == 0) |
| ath10k_pci_enable_legacy_irq(ar); |
| } |
| |
| static int ath10k_pci_request_irq_msix(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret, i; |
| |
| ret = request_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW, |
| ath10k_pci_msi_fw_handler, |
| IRQF_SHARED, "ath10k_pci", ar); |
| if (ret) { |
| ath10k_warn("failed to request MSI-X fw irq %d: %d\n", |
| ar_pci->pdev->irq + MSI_ASSIGN_FW, ret); |
| return ret; |
| } |
| |
| for (i = MSI_ASSIGN_CE_INITIAL; i <= MSI_ASSIGN_CE_MAX; i++) { |
| ret = request_irq(ar_pci->pdev->irq + i, |
| ath10k_pci_per_engine_handler, |
| IRQF_SHARED, "ath10k_pci", ar); |
| if (ret) { |
| ath10k_warn("failed to request MSI-X ce irq %d: %d\n", |
| ar_pci->pdev->irq + i, ret); |
| |
| for (i--; i >= MSI_ASSIGN_CE_INITIAL; i--) |
| free_irq(ar_pci->pdev->irq + i, ar); |
| |
| free_irq(ar_pci->pdev->irq + MSI_ASSIGN_FW, ar); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_request_irq_msi(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret; |
| |
| ret = request_irq(ar_pci->pdev->irq, |
| ath10k_pci_interrupt_handler, |
| IRQF_SHARED, "ath10k_pci", ar); |
| if (ret) { |
| ath10k_warn("failed to request MSI irq %d: %d\n", |
| ar_pci->pdev->irq, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_request_irq_legacy(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int ret; |
| |
| ret = request_irq(ar_pci->pdev->irq, |
| ath10k_pci_interrupt_handler, |
| IRQF_SHARED, "ath10k_pci", ar); |
| if (ret) { |
| ath10k_warn("failed to request legacy irq %d: %d\n", |
| ar_pci->pdev->irq, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_request_irq(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| switch (ar_pci->num_msi_intrs) { |
| case 0: |
| return ath10k_pci_request_irq_legacy(ar); |
| case 1: |
| return ath10k_pci_request_irq_msi(ar); |
| case MSI_NUM_REQUEST: |
| return ath10k_pci_request_irq_msix(ar); |
| } |
| |
| ath10k_warn("unknown irq configuration upon request\n"); |
| return -EINVAL; |
| } |
| |
| static void ath10k_pci_free_irq(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int i; |
| |
| /* There's at least one interrupt irregardless whether its legacy INTR |
| * or MSI or MSI-X */ |
| for (i = 0; i < max(1, ar_pci->num_msi_intrs); i++) |
| free_irq(ar_pci->pdev->irq + i, ar); |
| } |
| |
| static void ath10k_pci_init_irq_tasklets(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int i; |
| |
| tasklet_init(&ar_pci->intr_tq, ath10k_pci_tasklet, (unsigned long)ar); |
| tasklet_init(&ar_pci->msi_fw_err, ath10k_msi_err_tasklet, |
| (unsigned long)ar); |
| tasklet_init(&ar_pci->early_irq_tasklet, ath10k_pci_early_irq_tasklet, |
| (unsigned long)ar); |
| |
| for (i = 0; i < CE_COUNT; i++) { |
| ar_pci->pipe_info[i].ar_pci = ar_pci; |
| tasklet_init(&ar_pci->pipe_info[i].intr, ath10k_pci_ce_tasklet, |
| (unsigned long)&ar_pci->pipe_info[i]); |
| } |
| } |
| |
| static int ath10k_pci_init_irq(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| bool msix_supported = test_bit(ATH10K_PCI_FEATURE_MSI_X, |
| ar_pci->features); |
| int ret; |
| |
| ath10k_pci_init_irq_tasklets(ar); |
| |
| if (ath10k_pci_irq_mode != ATH10K_PCI_IRQ_AUTO && |
| !test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags)) |
| ath10k_info("limiting irq mode to: %d\n", ath10k_pci_irq_mode); |
| |
| /* Try MSI-X */ |
| if (ath10k_pci_irq_mode == ATH10K_PCI_IRQ_AUTO && msix_supported) { |
| ar_pci->num_msi_intrs = MSI_NUM_REQUEST; |
| ret = pci_enable_msi_range(ar_pci->pdev, ar_pci->num_msi_intrs, |
| ar_pci->num_msi_intrs); |
| if (ret > 0) |
| return 0; |
| |
| /* fall-through */ |
| } |
| |
| /* Try MSI */ |
| if (ath10k_pci_irq_mode != ATH10K_PCI_IRQ_LEGACY) { |
| ar_pci->num_msi_intrs = 1; |
| ret = pci_enable_msi(ar_pci->pdev); |
| if (ret == 0) |
| return 0; |
| |
| /* fall-through */ |
| } |
| |
| /* Try legacy irq |
| * |
| * A potential race occurs here: The CORE_BASE write |
| * depends on target correctly decoding AXI address but |
| * host won't know when target writes BAR to CORE_CTRL. |
| * This write might get lost if target has NOT written BAR. |
| * For now, fix the race by repeating the write in below |
| * synchronization checking. */ |
| ar_pci->num_msi_intrs = 0; |
| |
| ret = ath10k_pci_wake(ar); |
| if (ret) { |
| ath10k_warn("failed to wake target: %d\n", ret); |
| return ret; |
| } |
| |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS, |
| PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL); |
| ath10k_pci_sleep(ar); |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_deinit_irq_legacy(struct ath10k *ar) |
| { |
| int ret; |
| |
| ret = ath10k_pci_wake(ar); |
| if (ret) { |
| ath10k_warn("failed to wake target: %d\n", ret); |
| return ret; |
| } |
| |
| ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS, |
| 0); |
| ath10k_pci_sleep(ar); |
| |
| return 0; |
| } |
| |
| static int ath10k_pci_deinit_irq(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| |
| switch (ar_pci->num_msi_intrs) { |
| case 0: |
| return ath10k_pci_deinit_irq_legacy(ar); |
| case 1: |
| /* fall-through */ |
| case MSI_NUM_REQUEST: |
| pci_disable_msi(ar_pci->pdev); |
| return 0; |
| default: |
| pci_disable_msi(ar_pci->pdev); |
| } |
| |
| ath10k_warn("unknown irq configuration upon deinit\n"); |
| return -EINVAL; |
| } |
| |
| static int ath10k_pci_wait_for_target_init(struct ath10k *ar) |
| { |
| struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); |
| int wait_limit = 300; /* 3 sec */ |
| int ret; |
| |
| ret = ath10k_pci_wake(ar); |
| if (ret) { |
| ath10k_err("failed to wake up target: %d\n", ret); |
| return ret; |
| } |
| |
| while (wait_limit-- && |
| !(ioread32(ar_pci->mem + FW_INDICATOR_ADDRESS) & |
| FW_IND_INITIALIZED)) { |
| if (ar_pci->num_msi_intrs == 0) |
| /* Fix potential race by repeating CORE_BASE writes */ |
| iowrite32(PCIE_INTR_FIRMWARE_MASK | |
| PCIE_INTR_CE_MASK_ALL, |
| ar_pci->mem + (SOC_CORE_BASE_ADDRESS | |
| PCIE_INTR_ENABLE_ADDRESS)); |
| mdelay(10); |
| } |
| |
| if (wait_limit < 0) { |
| ath10k_err("target stalled\n"); |
| ret = -EIO; |
| goto out; |
| } |
| |
| out: |
| ath10k_pci_sleep(ar); |
| return ret; |
| } |
| |
| static int ath10k_pci_cold_reset(struct ath10k *ar) |
| { |
| int i, ret; |
| u32 val; |
| |
| ret = ath10k_do_pci_wake(ar); |
| if (ret) { |
| ath10k_err("failed to wake up target: %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* Put Target, including PCIe, into RESET. */ |
| val = ath10k_pci_reg_read32(ar, SOC_GLOBAL_RESET_ADDRESS); |
| val |= 1; |
| ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val); |
| |
| for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { |
| if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) & |
| RTC_STATE_COLD_RESET_MASK) |
| break; |
| msleep(1); |
| } |
| |
| /* Pull Target, including PCIe, out of RESET. */ |
| val &= ~1; |
| ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val); |
| |
| for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { |
| if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) & |
| RTC_STATE_COLD_RESET_MASK)) |
| break; |
| msleep(1); |
| } |
| |
| ath10k_do_pci_sleep(ar); |
| return 0; |
| } |
| |
| static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci) |
| { |
| int i; |
| |
| for (i = 0; i < ATH10K_PCI_FEATURE_COUNT; i++) { |
| if (!test_bit(i, ar_pci->features)) |
| continue; |
| |
| switch (i) { |
| case ATH10K_PCI_FEATURE_MSI_X: |
| ath10k_dbg(ATH10K_DBG_BOOT, "device supports MSI-X\n"); |
| break; |
| case ATH10K_PCI_FEATURE_SOC_POWER_SAVE: |
| ath10k_dbg(ATH10K_DBG_BOOT, "QCA98XX SoC power save enabled\n"); |
| break; |
| } |
| } |
| } |
| |
| static int ath10k_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *pci_dev) |
| { |
| void __iomem *mem; |
| int ret = 0; |
| struct ath10k *ar; |
| struct ath10k_pci *ar_pci; |
| u32 lcr_val, chip_id; |
| |
| ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| |
| ar_pci = kzalloc(sizeof(*ar_pci), GFP_KERNEL); |
| if (ar_pci == NULL) |
| return -ENOMEM; |
| |
| ar_pci->pdev = pdev; |
| ar_pci->dev = &pdev->dev; |
| |
| switch (pci_dev->device) { |
| case QCA988X_2_0_DEVICE_ID: |
| set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features); |
| break; |
| default: |
| ret = -ENODEV; |
| ath10k_err("Unknown device ID: %d\n", pci_dev->device); |
| goto err_ar_pci; |
| } |
| |
| if (ath10k_target_ps) |
| set_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features); |
| |
| ath10k_pci_dump_features(ar_pci); |
| |
| ar = ath10k_core_create(ar_pci, ar_pci->dev, &ath10k_pci_hif_ops); |
| if (!ar) { |
| ath10k_err("failed to create driver core\n"); |
| ret = -EINVAL; |
| goto err_ar_pci; |
| } |
| |
| ar_pci->ar = ar; |
| ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS; |
| atomic_set(&ar_pci->keep_awake_count, 0); |
| |
| pci_set_drvdata(pdev, ar); |
| |
| /* |
| * Without any knowledge of the Host, the Target may have been reset or |
| * power cycled and its Config Space may no longer reflect the PCI |
| * address space that was assigned earlier by the PCI infrastructure. |
| * Refresh it now. |
| */ |
| ret = pci_assign_resource(pdev, BAR_NUM); |
| if (ret) { |
| ath10k_err("failed to assign PCI space: %d\n", ret); |
| goto err_ar; |
| } |
| |
| ret = pci_enable_device(pdev); |
| if (ret) { |
| ath10k_err("failed to enable PCI device: %d\n", ret); |
| goto err_ar; |
| } |
| |
| /* Request MMIO resources */ |
| ret = pci_request_region(pdev, BAR_NUM, "ath"); |
| if (ret) { |
| ath10k_err("failed to request MMIO region: %d\n", ret); |
| goto err_device; |
| } |
| |
| /* |
| * Target structures have a limit of 32 bit DMA pointers. |
| * DMA pointers can be wider than 32 bits by default on some systems. |
| */ |
| ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (ret) { |
| ath10k_err("failed to set DMA mask to 32-bit: %d\n", ret); |
| goto err_region; |
| } |
| |
| ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (ret) { |
| ath10k_err("failed to set consistent DMA mask to 32-bit\n"); |
| goto err_region; |
| } |
| |
| /* Set bus master bit in PCI_COMMAND to enable DMA */ |
| pci_set_master(pdev); |
| |
| /* |
| * Temporary FIX: disable ASPM |
| * Will be removed after the OTP is programmed |
| */ |
| pci_read_config_dword(pdev, 0x80, &lcr_val); |
| pci_write_config_dword(pdev, 0x80, (lcr_val & 0xffffff00)); |
| |
| /* Arrange for access to Target SoC registers. */ |
| mem = pci_iomap(pdev, BAR_NUM, 0); |
| if (!mem) { |
| ath10k_err("failed to perform IOMAP for BAR%d\n", BAR_NUM); |
| ret = -EIO; |
| goto err_master; |
| } |
| |
| ar_pci->mem = mem; |
| |
| spin_lock_init(&ar_pci->ce_lock); |
| |
| ret = ath10k_do_pci_wake(ar); |
| if (ret) { |
| ath10k_err("Failed to get chip id: %d\n", ret); |
| goto err_iomap; |
| } |
| |
| chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS); |
| |
| ath10k_do_pci_sleep(ar); |
| |
| ath10k_dbg(ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem); |
| |
| ret = ath10k_core_register(ar, chip_id); |
| if (ret) { |
| ath10k_err("failed to register driver core: %d\n", ret); |
| goto err_iomap; |
| } |
| |
| return 0; |
| |
| err_iomap: |
| pci_iounmap(pdev, mem); |
| err_master: |
| pci_clear_master(pdev); |
| err_region: |
| pci_release_region(pdev, BAR_NUM); |
| err_device: |
| pci_disable_device(pdev); |
| err_ar: |
| ath10k_core_destroy(ar); |
| err_ar_pci: |
| /* call HIF PCI free here */ |
| kfree(ar_pci); |
| |
| return ret; |
| } |
| |
| static void ath10k_pci_remove(struct pci_dev *pdev) |
| { |
| struct ath10k *ar = pci_get_drvdata(pdev); |
| struct ath10k_pci *ar_pci; |
| |
| ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); |
| |
| if (!ar) |
| return; |
| |
| ar_pci = ath10k_pci_priv(ar); |
| |
| if (!ar_pci) |
| return; |
| |
| tasklet_kill(&ar_pci->msi_fw_err); |
| |
| ath10k_core_unregister(ar); |
| |
| pci_iounmap(pdev, ar_pci->mem); |
| pci_release_region(pdev, BAR_NUM); |
| pci_clear_master(pdev); |
| pci_disable_device(pdev); |
| |
| ath10k_core_destroy(ar); |
| kfree(ar_pci); |
| } |
| |
| MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table); |
| |
| static struct pci_driver ath10k_pci_driver = { |
| .name = "ath10k_pci", |
| .id_table = ath10k_pci_id_table, |
| .probe = ath10k_pci_probe, |
| .remove = ath10k_pci_remove, |
| }; |
| |
| static int __init ath10k_pci_init(void) |
| { |
| int ret; |
| |
| ret = pci_register_driver(&ath10k_pci_driver); |
| if (ret) |
| ath10k_err("failed to register PCI driver: %d\n", ret); |
| |
| return ret; |
| } |
| module_init(ath10k_pci_init); |
| |
| static void __exit ath10k_pci_exit(void) |
| { |
| pci_unregister_driver(&ath10k_pci_driver); |
| } |
| |
| module_exit(ath10k_pci_exit); |
| |
| MODULE_AUTHOR("Qualcomm Atheros"); |
| MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE); |
| MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE); |
| MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE); |