| /* | 
 |  * sound/sgalaxy.c | 
 |  * | 
 |  * Low level driver for Aztech Sound Galaxy cards. | 
 |  * Copyright 1998 Artur Skawina <skawina@geocities.com> | 
 |  * | 
 |  * Supported cards: | 
 |  *    Aztech Sound Galaxy Waverider Pro 32 - 3D | 
 |  *    Aztech Sound Galaxy Washington 16 | 
 |  * | 
 |  * Based on cs4232.c by Hannu Savolainen and Alan Cox. | 
 |  * | 
 |  * | 
 |  * Copyright (C) by Hannu Savolainen 1993-1997 | 
 |  * | 
 |  * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) | 
 |  * Version 2 (June 1991). See the "COPYING" file distributed with this software | 
 |  * for more info. | 
 |  * | 
 |  * Changes: | 
 |  * 11-10-2000	Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> | 
 |  *		Added __init to sb_rst() and sb_cmd() | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include "sound_config.h" | 
 | #include "ad1848.h" | 
 |  | 
 | static void sleep( unsigned howlong ) | 
 | { | 
 | 	current->state   = TASK_INTERRUPTIBLE; | 
 | 	schedule_timeout(howlong); | 
 | } | 
 |  | 
 | #define DPORT 0x80 | 
 |  | 
 | /* Sound Blaster regs */ | 
 |  | 
 | #define SBDSP_RESET      0x6 | 
 | #define SBDSP_READ       0xA | 
 | #define SBDSP_COMMAND    0xC | 
 | #define SBDSP_STATUS     SBDSP_COMMAND | 
 | #define SBDSP_DATA_AVAIL 0xE | 
 |  | 
 | static int __init sb_rst(int base) | 
 | { | 
 | 	int   i; | 
 |     | 
 | 	outb( 1, base+SBDSP_RESET );     /* reset the DSP */ | 
 | 	outb( 0, base+SBDSP_RESET ); | 
 |      | 
 | 	for ( i=0; i<500; i++ )          /* delay */ | 
 | 		inb(DPORT); | 
 |        | 
 | 	for ( i=0; i<100000; i++ ) | 
 | 	{ | 
 | 		if ( inb( base+SBDSP_DATA_AVAIL )&0x80 ) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if ( inb( base+SBDSP_READ )!=0xAA ) | 
 | 		return 0; | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int __init sb_cmd( int base, unsigned char val ) | 
 | { | 
 | 	int  i; | 
 |  | 
 | 	for ( i=100000; i; i-- ) | 
 | 	{ | 
 | 		if ( (inb( base+SBDSP_STATUS )&0x80)==0 ) | 
 | 		{ | 
 |         		outb( val, base+SBDSP_COMMAND ); | 
 |         		break; | 
 | 		} | 
 | 	} | 
 | 	return i;      /* i>0 == success */ | 
 | } | 
 |  | 
 |  | 
 | #define ai_sgbase    driver_use_1 | 
 |  | 
 | static int __init probe_sgalaxy( struct address_info *ai ) | 
 | { | 
 | 	struct resource *ports; | 
 | 	int n; | 
 |  | 
 | 	if (!request_region(ai->io_base, 4, "WSS config")) { | 
 | 		printk(KERN_ERR "sgalaxy: WSS IO port 0x%03x not available\n", ai->io_base); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	ports = request_region(ai->io_base + 4, 4, "ad1848"); | 
 | 	if (!ports) { | 
 | 		printk(KERN_ERR "sgalaxy: WSS IO port 0x%03x not available\n", ai->io_base); | 
 | 		release_region(ai->io_base, 4); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (!request_region( ai->ai_sgbase, 0x10, "SoundGalaxy SB")) { | 
 | 		printk(KERN_ERR "sgalaxy: SB IO port 0x%03x not available\n", ai->ai_sgbase); | 
 | 		release_region(ai->io_base + 4, 4); | 
 | 		release_region(ai->io_base, 4); | 
 | 		return 0; | 
 | 	} | 
 |          | 
 | 	if (ad1848_detect(ports, NULL, ai->osp)) | 
 | 		goto out;  /* The card is already active, check irq etc... */ | 
 |          | 
 | 	/* switch to MSS/WSS mode */ | 
 |     | 
 | 	sb_rst( ai->ai_sgbase ); | 
 |     | 
 | 	sb_cmd( ai->ai_sgbase, 9 ); | 
 | 	sb_cmd( ai->ai_sgbase, 0 ); | 
 |  | 
 | 	sleep( HZ/10 ); | 
 |  | 
 | out: | 
 |       	if (!probe_ms_sound(ai, ports)) { | 
 | 		release_region(ai->io_base + 4, 4); | 
 | 		release_region(ai->io_base, 4); | 
 | 		release_region(ai->ai_sgbase, 0x10); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	attach_ms_sound(ai, ports, THIS_MODULE); | 
 | 	n=ai->slots[0]; | 
 | 	 | 
 | 	if (n!=-1 && audio_devs[n]->mixer_dev != -1 ) { | 
 | 		AD1848_REROUTE( SOUND_MIXER_LINE1, SOUND_MIXER_LINE );   /* Line-in */ | 
 | 		AD1848_REROUTE( SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH );  /* FM+Wavetable*/ | 
 | 		AD1848_REROUTE( SOUND_MIXER_LINE3, SOUND_MIXER_CD );     /* CD */ | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | static void __exit unload_sgalaxy( struct address_info *ai ) | 
 | { | 
 | 	unload_ms_sound( ai ); | 
 | 	release_region( ai->ai_sgbase, 0x10 ); | 
 | } | 
 |  | 
 | static struct address_info cfg; | 
 |  | 
 | static int __initdata io	= -1; | 
 | static int __initdata irq	= -1; | 
 | static int __initdata dma	= -1; | 
 | static int __initdata dma2	= -1; | 
 | static int __initdata sgbase	= -1; | 
 |  | 
 | module_param(io, int, 0); | 
 | module_param(irq, int, 0); | 
 | module_param(dma, int, 0); | 
 | module_param(dma2, int, 0); | 
 | module_param(sgbase, int, 0); | 
 |  | 
 | static int __init init_sgalaxy(void) | 
 | { | 
 | 	cfg.io_base   = io; | 
 | 	cfg.irq       = irq; | 
 | 	cfg.dma       = dma; | 
 | 	cfg.dma2      = dma2; | 
 | 	cfg.ai_sgbase = sgbase; | 
 |  | 
 | 	if (cfg.io_base == -1 || cfg.irq == -1 || cfg.dma == -1 || cfg.ai_sgbase == -1 ) { | 
 | 		printk(KERN_ERR "sgalaxy: io, irq, dma and sgbase must be set.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if ( probe_sgalaxy(&cfg) == 0 ) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit cleanup_sgalaxy(void) | 
 | { | 
 | 	unload_sgalaxy(&cfg); | 
 | } | 
 |  | 
 | module_init(init_sgalaxy); | 
 | module_exit(cleanup_sgalaxy); | 
 |  | 
 | #ifndef MODULE | 
 | static int __init setup_sgalaxy(char *str) | 
 | { | 
 | 	/* io, irq, dma, dma2, sgbase */ | 
 | 	int ints[6]; | 
 | 	 | 
 | 	str = get_options(str, ARRAY_SIZE(ints), ints); | 
 | 	io	= ints[1]; | 
 | 	irq	= ints[2]; | 
 | 	dma	= ints[3]; | 
 | 	dma2	= ints[4]; | 
 | 	sgbase	= ints[5]; | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("sgalaxy=", setup_sgalaxy); | 
 | #endif | 
 | MODULE_LICENSE("GPL"); |