| /* | 
 |  * Contains common pci routines for ALL ppc platform | 
 |  * (based on pci_32.c and pci_64.c) | 
 |  * | 
 |  * Port for PPC64 David Engebretsen, IBM Corp. | 
 |  * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. | 
 |  * | 
 |  * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM | 
 |  *   Rework, based on alpha PCI code. | 
 |  * | 
 |  * Common pmac/prep/chrp pci routines. -- Cort | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version | 
 |  * 2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #undef DEBUG | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/string.h> | 
 | #include <linux/init.h> | 
 | #include <linux/bootmem.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/list.h> | 
 | #include <linux/syscalls.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/vmalloc.h> | 
 |  | 
 | #include <asm/processor.h> | 
 | #include <asm/io.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/pci-bridge.h> | 
 | #include <asm/byteorder.h> | 
 | #include <asm/machdep.h> | 
 | #include <asm/ppc-pci.h> | 
 | #include <asm/firmware.h> | 
 |  | 
 | #ifdef DEBUG | 
 | #include <asm/udbg.h> | 
 | #define DBG(fmt...) printk(fmt) | 
 | #else | 
 | #define DBG(fmt...) | 
 | #endif | 
 |  | 
 | static DEFINE_SPINLOCK(hose_spinlock); | 
 |  | 
 | /* XXX kill that some day ... */ | 
 | static int global_phb_number;		/* Global phb counter */ | 
 |  | 
 | /* ISA Memory physical address */ | 
 | resource_size_t isa_mem_base; | 
 |  | 
 | /* Default PCI flags is 0 */ | 
 | unsigned int ppc_pci_flags; | 
 |  | 
 | static struct dma_mapping_ops *pci_dma_ops; | 
 |  | 
 | void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) | 
 | { | 
 | 	pci_dma_ops = dma_ops; | 
 | } | 
 |  | 
 | struct dma_mapping_ops *get_pci_dma_ops(void) | 
 | { | 
 | 	return pci_dma_ops; | 
 | } | 
 | EXPORT_SYMBOL(get_pci_dma_ops); | 
 |  | 
 | int pci_set_dma_mask(struct pci_dev *dev, u64 mask) | 
 | { | 
 | 	return dma_set_mask(&dev->dev, mask); | 
 | } | 
 |  | 
 | int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	rc = dma_set_mask(&dev->dev, mask); | 
 | 	dev->dev.coherent_dma_mask = dev->dma_mask; | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | struct pci_controller *pcibios_alloc_controller(struct device_node *dev) | 
 | { | 
 | 	struct pci_controller *phb; | 
 |  | 
 | 	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL); | 
 | 	if (phb == NULL) | 
 | 		return NULL; | 
 | 	spin_lock(&hose_spinlock); | 
 | 	phb->global_number = global_phb_number++; | 
 | 	list_add_tail(&phb->list_node, &hose_list); | 
 | 	spin_unlock(&hose_spinlock); | 
 | 	phb->dn = dev; | 
 | 	phb->is_dynamic = mem_init_done; | 
 | #ifdef CONFIG_PPC64 | 
 | 	if (dev) { | 
 | 		int nid = of_node_to_nid(dev); | 
 |  | 
 | 		if (nid < 0 || !node_online(nid)) | 
 | 			nid = -1; | 
 |  | 
 | 		PHB_SET_NODE(phb, nid); | 
 | 	} | 
 | #endif | 
 | 	return phb; | 
 | } | 
 |  | 
 | void pcibios_free_controller(struct pci_controller *phb) | 
 | { | 
 | 	spin_lock(&hose_spinlock); | 
 | 	list_del(&phb->list_node); | 
 | 	spin_unlock(&hose_spinlock); | 
 |  | 
 | 	if (phb->is_dynamic) | 
 | 		kfree(phb); | 
 | } | 
 |  | 
 | int pcibios_vaddr_is_ioport(void __iomem *address) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct pci_controller *hose; | 
 | 	unsigned long size; | 
 |  | 
 | 	spin_lock(&hose_spinlock); | 
 | 	list_for_each_entry(hose, &hose_list, list_node) { | 
 | #ifdef CONFIG_PPC64 | 
 | 		size = hose->pci_io_size; | 
 | #else | 
 | 		size = hose->io_resource.end - hose->io_resource.start + 1; | 
 | #endif | 
 | 		if (address >= hose->io_base_virt && | 
 | 		    address < (hose->io_base_virt + size)) { | 
 | 			ret = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock(&hose_spinlock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Return the domain number for this bus. | 
 |  */ | 
 | int pci_domain_nr(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(bus); | 
 |  | 
 | 	return hose->global_number; | 
 | } | 
 | EXPORT_SYMBOL(pci_domain_nr); | 
 |  | 
 | #ifdef CONFIG_PPC_OF | 
 |  | 
 | /* This routine is meant to be used early during boot, when the | 
 |  * PCI bus numbers have not yet been assigned, and you need to | 
 |  * issue PCI config cycles to an OF device. | 
 |  * It could also be used to "fix" RTAS config cycles if you want | 
 |  * to set pci_assign_all_buses to 1 and still use RTAS for PCI | 
 |  * config cycles. | 
 |  */ | 
 | struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) | 
 | { | 
 | 	if (!have_of) | 
 | 		return NULL; | 
 | 	while(node) { | 
 | 		struct pci_controller *hose, *tmp; | 
 | 		list_for_each_entry_safe(hose, tmp, &hose_list, list_node) | 
 | 			if (hose->dn == node) | 
 | 				return hose; | 
 | 		node = node->parent; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static ssize_t pci_show_devspec(struct device *dev, | 
 | 		struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct pci_dev *pdev; | 
 | 	struct device_node *np; | 
 |  | 
 | 	pdev = to_pci_dev (dev); | 
 | 	np = pci_device_to_OF_node(pdev); | 
 | 	if (np == NULL || np->full_name == NULL) | 
 | 		return 0; | 
 | 	return sprintf(buf, "%s", np->full_name); | 
 | } | 
 | static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); | 
 | #endif /* CONFIG_PPC_OF */ | 
 |  | 
 | /* Add sysfs properties */ | 
 | int pcibios_add_platform_entries(struct pci_dev *pdev) | 
 | { | 
 | #ifdef CONFIG_PPC_OF | 
 | 	return device_create_file(&pdev->dev, &dev_attr_devspec); | 
 | #else | 
 | 	return 0; | 
 | #endif /* CONFIG_PPC_OF */ | 
 |  | 
 | } | 
 |  | 
 | char __devinit *pcibios_setup(char *str) | 
 | { | 
 | 	return str; | 
 | } | 
 |  | 
 | void __devinit pcibios_setup_new_device(struct pci_dev *dev) | 
 | { | 
 | 	struct dev_archdata *sd = &dev->dev.archdata; | 
 |  | 
 | 	sd->of_node = pci_device_to_OF_node(dev); | 
 |  | 
 | 	DBG("PCI: device %s OF node: %s\n", pci_name(dev), | 
 | 	    sd->of_node ? sd->of_node->full_name : "<none>"); | 
 |  | 
 | 	sd->dma_ops = pci_dma_ops; | 
 | #ifdef CONFIG_PPC32 | 
 | 	sd->dma_data = (void *)PCI_DRAM_OFFSET; | 
 | #endif | 
 | 	set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); | 
 |  | 
 | 	if (ppc_md.pci_dma_dev_setup) | 
 | 		ppc_md.pci_dma_dev_setup(dev); | 
 | } | 
 | EXPORT_SYMBOL(pcibios_setup_new_device); | 
 |  | 
 | /* | 
 |  * Reads the interrupt pin to determine if interrupt is use by card. | 
 |  * If the interrupt is used, then gets the interrupt line from the | 
 |  * openfirmware and sets it in the pci_dev and pci_config line. | 
 |  */ | 
 | int pci_read_irq_line(struct pci_dev *pci_dev) | 
 | { | 
 | 	struct of_irq oirq; | 
 | 	unsigned int virq; | 
 |  | 
 | 	/* The current device-tree that iSeries generates from the HV | 
 | 	 * PCI informations doesn't contain proper interrupt routing, | 
 | 	 * and all the fallback would do is print out crap, so we | 
 | 	 * don't attempt to resolve the interrupts here at all, some | 
 | 	 * iSeries specific fixup does it. | 
 | 	 * | 
 | 	 * In the long run, we will hopefully fix the generated device-tree | 
 | 	 * instead. | 
 | 	 */ | 
 | #ifdef CONFIG_PPC_ISERIES | 
 | 	if (firmware_has_feature(FW_FEATURE_ISERIES)) | 
 | 		return -1; | 
 | #endif | 
 |  | 
 | 	DBG("Try to map irq for %s...\n", pci_name(pci_dev)); | 
 |  | 
 | #ifdef DEBUG | 
 | 	memset(&oirq, 0xff, sizeof(oirq)); | 
 | #endif | 
 | 	/* Try to get a mapping from the device-tree */ | 
 | 	if (of_irq_map_pci(pci_dev, &oirq)) { | 
 | 		u8 line, pin; | 
 |  | 
 | 		/* If that fails, lets fallback to what is in the config | 
 | 		 * space and map that through the default controller. We | 
 | 		 * also set the type to level low since that's what PCI | 
 | 		 * interrupts are. If your platform does differently, then | 
 | 		 * either provide a proper interrupt tree or don't use this | 
 | 		 * function. | 
 | 		 */ | 
 | 		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) | 
 | 			return -1; | 
 | 		if (pin == 0) | 
 | 			return -1; | 
 | 		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || | 
 | 		    line == 0xff || line == 0) { | 
 | 			return -1; | 
 | 		} | 
 | 		DBG(" -> no map ! Using line %d (pin %d) from PCI config\n", | 
 | 		    line, pin); | 
 |  | 
 | 		virq = irq_create_mapping(NULL, line); | 
 | 		if (virq != NO_IRQ) | 
 | 			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); | 
 | 	} else { | 
 | 		DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n", | 
 | 		    oirq.size, oirq.specifier[0], oirq.specifier[1], | 
 | 		    oirq.controller->full_name); | 
 |  | 
 | 		virq = irq_create_of_mapping(oirq.controller, oirq.specifier, | 
 | 					     oirq.size); | 
 | 	} | 
 | 	if(virq == NO_IRQ) { | 
 | 		DBG(" -> failed to map !\n"); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	DBG(" -> mapped to linux irq %d\n", virq); | 
 |  | 
 | 	pci_dev->irq = virq; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(pci_read_irq_line); | 
 |  | 
 | /* | 
 |  * Platform support for /proc/bus/pci/X/Y mmap()s, | 
 |  * modelled on the sparc64 implementation by Dave Miller. | 
 |  *  -- paulus. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Adjust vm_pgoff of VMA such that it is the physical page offset | 
 |  * corresponding to the 32-bit pci bus offset for DEV requested by the user. | 
 |  * | 
 |  * Basically, the user finds the base address for his device which he wishes | 
 |  * to mmap.  They read the 32-bit value from the config space base register, | 
 |  * add whatever PAGE_SIZE multiple offset they wish, and feed this into the | 
 |  * offset parameter of mmap on /proc/bus/pci/XXX for that device. | 
 |  * | 
 |  * Returns negative error code on failure, zero on success. | 
 |  */ | 
 | static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, | 
 | 					       resource_size_t *offset, | 
 | 					       enum pci_mmap_state mmap_state) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(dev->bus); | 
 | 	unsigned long io_offset = 0; | 
 | 	int i, res_bit; | 
 |  | 
 | 	if (hose == 0) | 
 | 		return NULL;		/* should never happen */ | 
 |  | 
 | 	/* If memory, add on the PCI bridge address offset */ | 
 | 	if (mmap_state == pci_mmap_mem) { | 
 | #if 0 /* See comment in pci_resource_to_user() for why this is disabled */ | 
 | 		*offset += hose->pci_mem_offset; | 
 | #endif | 
 | 		res_bit = IORESOURCE_MEM; | 
 | 	} else { | 
 | 		io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 		*offset += io_offset; | 
 | 		res_bit = IORESOURCE_IO; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check that the offset requested corresponds to one of the | 
 | 	 * resources of the device. | 
 | 	 */ | 
 | 	for (i = 0; i <= PCI_ROM_RESOURCE; i++) { | 
 | 		struct resource *rp = &dev->resource[i]; | 
 | 		int flags = rp->flags; | 
 |  | 
 | 		/* treat ROM as memory (should be already) */ | 
 | 		if (i == PCI_ROM_RESOURCE) | 
 | 			flags |= IORESOURCE_MEM; | 
 |  | 
 | 		/* Active and same type? */ | 
 | 		if ((flags & res_bit) == 0) | 
 | 			continue; | 
 |  | 
 | 		/* In the range of this resource? */ | 
 | 		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) | 
 | 			continue; | 
 |  | 
 | 		/* found it! construct the final physical address */ | 
 | 		if (mmap_state == pci_mmap_io) | 
 | 			*offset += hose->io_base_phys - io_offset; | 
 | 		return rp; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci | 
 |  * device mapping. | 
 |  */ | 
 | static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, | 
 | 				      pgprot_t protection, | 
 | 				      enum pci_mmap_state mmap_state, | 
 | 				      int write_combine) | 
 | { | 
 | 	unsigned long prot = pgprot_val(protection); | 
 |  | 
 | 	/* Write combine is always 0 on non-memory space mappings. On | 
 | 	 * memory space, if the user didn't pass 1, we check for a | 
 | 	 * "prefetchable" resource. This is a bit hackish, but we use | 
 | 	 * this to workaround the inability of /sysfs to provide a write | 
 | 	 * combine bit | 
 | 	 */ | 
 | 	if (mmap_state != pci_mmap_mem) | 
 | 		write_combine = 0; | 
 | 	else if (write_combine == 0) { | 
 | 		if (rp->flags & IORESOURCE_PREFETCH) | 
 | 			write_combine = 1; | 
 | 	} | 
 |  | 
 | 	/* XXX would be nice to have a way to ask for write-through */ | 
 | 	prot |= _PAGE_NO_CACHE; | 
 | 	if (write_combine) | 
 | 		prot &= ~_PAGE_GUARDED; | 
 | 	else | 
 | 		prot |= _PAGE_GUARDED; | 
 |  | 
 | 	return __pgprot(prot); | 
 | } | 
 |  | 
 | /* | 
 |  * This one is used by /dev/mem and fbdev who have no clue about the | 
 |  * PCI device, it tries to find the PCI device first and calls the | 
 |  * above routine | 
 |  */ | 
 | pgprot_t pci_phys_mem_access_prot(struct file *file, | 
 | 				  unsigned long pfn, | 
 | 				  unsigned long size, | 
 | 				  pgprot_t protection) | 
 | { | 
 | 	struct pci_dev *pdev = NULL; | 
 | 	struct resource *found = NULL; | 
 | 	unsigned long prot = pgprot_val(protection); | 
 | 	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT; | 
 | 	int i; | 
 |  | 
 | 	if (page_is_ram(pfn)) | 
 | 		return __pgprot(prot); | 
 |  | 
 | 	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; | 
 |  | 
 | 	for_each_pci_dev(pdev) { | 
 | 		for (i = 0; i <= PCI_ROM_RESOURCE; i++) { | 
 | 			struct resource *rp = &pdev->resource[i]; | 
 | 			int flags = rp->flags; | 
 |  | 
 | 			/* Active and same type? */ | 
 | 			if ((flags & IORESOURCE_MEM) == 0) | 
 | 				continue; | 
 | 			/* In the range of this resource? */ | 
 | 			if (offset < (rp->start & PAGE_MASK) || | 
 | 			    offset > rp->end) | 
 | 				continue; | 
 | 			found = rp; | 
 | 			break; | 
 | 		} | 
 | 		if (found) | 
 | 			break; | 
 | 	} | 
 | 	if (found) { | 
 | 		if (found->flags & IORESOURCE_PREFETCH) | 
 | 			prot &= ~_PAGE_GUARDED; | 
 | 		pci_dev_put(pdev); | 
 | 	} | 
 |  | 
 | 	DBG("non-PCI map for %llx, prot: %lx\n", | 
 | 	    (unsigned long long)offset, prot); | 
 |  | 
 | 	return __pgprot(prot); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Perform the actual remap of the pages for a PCI device mapping, as | 
 |  * appropriate for this architecture.  The region in the process to map | 
 |  * is described by vm_start and vm_end members of VMA, the base physical | 
 |  * address is found in vm_pgoff. | 
 |  * The pci device structure is provided so that architectures may make mapping | 
 |  * decisions on a per-device or per-bus basis. | 
 |  * | 
 |  * Returns a negative error code on failure, zero on success. | 
 |  */ | 
 | int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, | 
 | 			enum pci_mmap_state mmap_state, int write_combine) | 
 | { | 
 | 	resource_size_t offset = | 
 | 		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; | 
 | 	struct resource *rp; | 
 | 	int ret; | 
 |  | 
 | 	rp = __pci_mmap_make_offset(dev, &offset, mmap_state); | 
 | 	if (rp == NULL) | 
 | 		return -EINVAL; | 
 |  | 
 | 	vma->vm_pgoff = offset >> PAGE_SHIFT; | 
 | 	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, | 
 | 						  vma->vm_page_prot, | 
 | 						  mmap_state, write_combine); | 
 |  | 
 | 	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | 
 | 			       vma->vm_end - vma->vm_start, vma->vm_page_prot); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* This provides legacy IO read access on a bus */ | 
 | int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size) | 
 | { | 
 | 	unsigned long offset; | 
 | 	struct pci_controller *hose = pci_bus_to_host(bus); | 
 | 	struct resource *rp = &hose->io_resource; | 
 | 	void __iomem *addr; | 
 |  | 
 | 	/* Check if port can be supported by that bus. We only check | 
 | 	 * the ranges of the PHB though, not the bus itself as the rules | 
 | 	 * for forwarding legacy cycles down bridges are not our problem | 
 | 	 * here. So if the host bridge supports it, we do it. | 
 | 	 */ | 
 | 	offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 	offset += port; | 
 |  | 
 | 	if (!(rp->flags & IORESOURCE_IO)) | 
 | 		return -ENXIO; | 
 | 	if (offset < rp->start || (offset + size) > rp->end) | 
 | 		return -ENXIO; | 
 | 	addr = hose->io_base_virt + port; | 
 |  | 
 | 	switch(size) { | 
 | 	case 1: | 
 | 		*((u8 *)val) = in_8(addr); | 
 | 		return 1; | 
 | 	case 2: | 
 | 		if (port & 1) | 
 | 			return -EINVAL; | 
 | 		*((u16 *)val) = in_le16(addr); | 
 | 		return 2; | 
 | 	case 4: | 
 | 		if (port & 3) | 
 | 			return -EINVAL; | 
 | 		*((u32 *)val) = in_le32(addr); | 
 | 		return 4; | 
 | 	} | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | /* This provides legacy IO write access on a bus */ | 
 | int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size) | 
 | { | 
 | 	unsigned long offset; | 
 | 	struct pci_controller *hose = pci_bus_to_host(bus); | 
 | 	struct resource *rp = &hose->io_resource; | 
 | 	void __iomem *addr; | 
 |  | 
 | 	/* Check if port can be supported by that bus. We only check | 
 | 	 * the ranges of the PHB though, not the bus itself as the rules | 
 | 	 * for forwarding legacy cycles down bridges are not our problem | 
 | 	 * here. So if the host bridge supports it, we do it. | 
 | 	 */ | 
 | 	offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 	offset += port; | 
 |  | 
 | 	if (!(rp->flags & IORESOURCE_IO)) | 
 | 		return -ENXIO; | 
 | 	if (offset < rp->start || (offset + size) > rp->end) | 
 | 		return -ENXIO; | 
 | 	addr = hose->io_base_virt + port; | 
 |  | 
 | 	/* WARNING: The generic code is idiotic. It gets passed a pointer | 
 | 	 * to what can be a 1, 2 or 4 byte quantity and always reads that | 
 | 	 * as a u32, which means that we have to correct the location of | 
 | 	 * the data read within those 32 bits for size 1 and 2 | 
 | 	 */ | 
 | 	switch(size) { | 
 | 	case 1: | 
 | 		out_8(addr, val >> 24); | 
 | 		return 1; | 
 | 	case 2: | 
 | 		if (port & 1) | 
 | 			return -EINVAL; | 
 | 		out_le16(addr, val >> 16); | 
 | 		return 2; | 
 | 	case 4: | 
 | 		if (port & 3) | 
 | 			return -EINVAL; | 
 | 		out_le32(addr, val); | 
 | 		return 4; | 
 | 	} | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | /* This provides legacy IO or memory mmap access on a bus */ | 
 | int pci_mmap_legacy_page_range(struct pci_bus *bus, | 
 | 			       struct vm_area_struct *vma, | 
 | 			       enum pci_mmap_state mmap_state) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(bus); | 
 | 	resource_size_t offset = | 
 | 		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; | 
 | 	resource_size_t size = vma->vm_end - vma->vm_start; | 
 | 	struct resource *rp; | 
 |  | 
 | 	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n", | 
 | 		 pci_domain_nr(bus), bus->number, | 
 | 		 mmap_state == pci_mmap_mem ? "MEM" : "IO", | 
 | 		 (unsigned long long)offset, | 
 | 		 (unsigned long long)(offset + size - 1)); | 
 |  | 
 | 	if (mmap_state == pci_mmap_mem) { | 
 | 		if ((offset + size) > hose->isa_mem_size) | 
 | 			return -ENXIO; | 
 | 		offset += hose->isa_mem_phys; | 
 | 	} else { | 
 | 		unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 		unsigned long roffset = offset + io_offset; | 
 | 		rp = &hose->io_resource; | 
 | 		if (!(rp->flags & IORESOURCE_IO)) | 
 | 			return -ENXIO; | 
 | 		if (roffset < rp->start || (roffset + size) > rp->end) | 
 | 			return -ENXIO; | 
 | 		offset += hose->io_base_phys; | 
 | 	} | 
 | 	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset); | 
 |  | 
 | 	vma->vm_pgoff = offset >> PAGE_SHIFT; | 
 | 	vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | 
 | 				     | _PAGE_NO_CACHE | _PAGE_GUARDED); | 
 | 	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, | 
 | 			       vma->vm_end - vma->vm_start, | 
 | 			       vma->vm_page_prot); | 
 | } | 
 |  | 
 | void pci_resource_to_user(const struct pci_dev *dev, int bar, | 
 | 			  const struct resource *rsrc, | 
 | 			  resource_size_t *start, resource_size_t *end) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(dev->bus); | 
 | 	resource_size_t offset = 0; | 
 |  | 
 | 	if (hose == NULL) | 
 | 		return; | 
 |  | 
 | 	if (rsrc->flags & IORESOURCE_IO) | 
 | 		offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 |  | 
 | 	/* We pass a fully fixed up address to userland for MMIO instead of | 
 | 	 * a BAR value because X is lame and expects to be able to use that | 
 | 	 * to pass to /dev/mem ! | 
 | 	 * | 
 | 	 * That means that we'll have potentially 64 bits values where some | 
 | 	 * userland apps only expect 32 (like X itself since it thinks only | 
 | 	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on | 
 | 	 * 32 bits CHRPs :-( | 
 | 	 * | 
 | 	 * Hopefully, the sysfs insterface is immune to that gunk. Once X | 
 | 	 * has been fixed (and the fix spread enough), we can re-enable the | 
 | 	 * 2 lines below and pass down a BAR value to userland. In that case | 
 | 	 * we'll also have to re-enable the matching code in | 
 | 	 * __pci_mmap_make_offset(). | 
 | 	 * | 
 | 	 * BenH. | 
 | 	 */ | 
 | #if 0 | 
 | 	else if (rsrc->flags & IORESOURCE_MEM) | 
 | 		offset = hose->pci_mem_offset; | 
 | #endif | 
 |  | 
 | 	*start = rsrc->start - offset; | 
 | 	*end = rsrc->end - offset; | 
 | } | 
 |  | 
 | /** | 
 |  * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree | 
 |  * @hose: newly allocated pci_controller to be setup | 
 |  * @dev: device node of the host bridge | 
 |  * @primary: set if primary bus (32 bits only, soon to be deprecated) | 
 |  * | 
 |  * This function will parse the "ranges" property of a PCI host bridge device | 
 |  * node and setup the resource mapping of a pci controller based on its | 
 |  * content. | 
 |  * | 
 |  * Life would be boring if it wasn't for a few issues that we have to deal | 
 |  * with here: | 
 |  * | 
 |  *   - We can only cope with one IO space range and up to 3 Memory space | 
 |  *     ranges. However, some machines (thanks Apple !) tend to split their | 
 |  *     space into lots of small contiguous ranges. So we have to coalesce. | 
 |  * | 
 |  *   - We can only cope with all memory ranges having the same offset | 
 |  *     between CPU addresses and PCI addresses. Unfortunately, some bridges | 
 |  *     are setup for a large 1:1 mapping along with a small "window" which | 
 |  *     maps PCI address 0 to some arbitrary high address of the CPU space in | 
 |  *     order to give access to the ISA memory hole. | 
 |  *     The way out of here that I've chosen for now is to always set the | 
 |  *     offset based on the first resource found, then override it if we | 
 |  *     have a different offset and the previous was set by an ISA hole. | 
 |  * | 
 |  *   - Some busses have IO space not starting at 0, which causes trouble with | 
 |  *     the way we do our IO resource renumbering. The code somewhat deals with | 
 |  *     it for 64 bits but I would expect problems on 32 bits. | 
 |  * | 
 |  *   - Some 32 bits platforms such as 4xx can have physical space larger than | 
 |  *     32 bits so we need to use 64 bits values for the parsing | 
 |  */ | 
 | void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, | 
 | 					    struct device_node *dev, | 
 | 					    int primary) | 
 | { | 
 | 	const u32 *ranges; | 
 | 	int rlen; | 
 | 	int pna = of_n_addr_cells(dev); | 
 | 	int np = pna + 5; | 
 | 	int memno = 0, isa_hole = -1; | 
 | 	u32 pci_space; | 
 | 	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; | 
 | 	unsigned long long isa_mb = 0; | 
 | 	struct resource *res; | 
 |  | 
 | 	printk(KERN_INFO "PCI host bridge %s %s ranges:\n", | 
 | 	       dev->full_name, primary ? "(primary)" : ""); | 
 |  | 
 | 	/* Get ranges property */ | 
 | 	ranges = of_get_property(dev, "ranges", &rlen); | 
 | 	if (ranges == NULL) | 
 | 		return; | 
 |  | 
 | 	/* Parse it */ | 
 | 	while ((rlen -= np * 4) >= 0) { | 
 | 		/* Read next ranges element */ | 
 | 		pci_space = ranges[0]; | 
 | 		pci_addr = of_read_number(ranges + 1, 2); | 
 | 		cpu_addr = of_translate_address(dev, ranges + 3); | 
 | 		size = of_read_number(ranges + pna + 3, 2); | 
 | 		ranges += np; | 
 |  | 
 | 		/* If we failed translation or got a zero-sized region | 
 | 		 * (some FW try to feed us with non sensical zero sized regions | 
 | 		 * such as power3 which look like some kind of attempt at exposing | 
 | 		 * the VGA memory hole) | 
 | 		 */ | 
 | 		if (cpu_addr == OF_BAD_ADDR || size == 0) | 
 | 			continue; | 
 |  | 
 | 		/* Now consume following elements while they are contiguous */ | 
 | 		for (; rlen >= np * sizeof(u32); | 
 | 		     ranges += np, rlen -= np * 4) { | 
 | 			if (ranges[0] != pci_space) | 
 | 				break; | 
 | 			pci_next = of_read_number(ranges + 1, 2); | 
 | 			cpu_next = of_translate_address(dev, ranges + 3); | 
 | 			if (pci_next != pci_addr + size || | 
 | 			    cpu_next != cpu_addr + size) | 
 | 				break; | 
 | 			size += of_read_number(ranges + pna + 3, 2); | 
 | 		} | 
 |  | 
 | 		/* Act based on address space type */ | 
 | 		res = NULL; | 
 | 		switch ((pci_space >> 24) & 0x3) { | 
 | 		case 1:		/* PCI IO space */ | 
 | 			printk(KERN_INFO | 
 | 			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n", | 
 | 			       cpu_addr, cpu_addr + size - 1, pci_addr); | 
 |  | 
 | 			/* We support only one IO range */ | 
 | 			if (hose->pci_io_size) { | 
 | 				printk(KERN_INFO | 
 | 				       " \\--> Skipped (too many) !\n"); | 
 | 				continue; | 
 | 			} | 
 | #ifdef CONFIG_PPC32 | 
 | 			/* On 32 bits, limit I/O space to 16MB */ | 
 | 			if (size > 0x01000000) | 
 | 				size = 0x01000000; | 
 |  | 
 | 			/* 32 bits needs to map IOs here */ | 
 | 			hose->io_base_virt = ioremap(cpu_addr, size); | 
 |  | 
 | 			/* Expect trouble if pci_addr is not 0 */ | 
 | 			if (primary) | 
 | 				isa_io_base = | 
 | 					(unsigned long)hose->io_base_virt; | 
 | #endif /* CONFIG_PPC32 */ | 
 | 			/* pci_io_size and io_base_phys always represent IO | 
 | 			 * space starting at 0 so we factor in pci_addr | 
 | 			 */ | 
 | 			hose->pci_io_size = pci_addr + size; | 
 | 			hose->io_base_phys = cpu_addr - pci_addr; | 
 |  | 
 | 			/* Build resource */ | 
 | 			res = &hose->io_resource; | 
 | 			res->flags = IORESOURCE_IO; | 
 | 			res->start = pci_addr; | 
 | 			break; | 
 | 		case 2:		/* PCI Memory space */ | 
 | 		case 3:		/* PCI 64 bits Memory space */ | 
 | 			printk(KERN_INFO | 
 | 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", | 
 | 			       cpu_addr, cpu_addr + size - 1, pci_addr, | 
 | 			       (pci_space & 0x40000000) ? "Prefetch" : ""); | 
 |  | 
 | 			/* We support only 3 memory ranges */ | 
 | 			if (memno >= 3) { | 
 | 				printk(KERN_INFO | 
 | 				       " \\--> Skipped (too many) !\n"); | 
 | 				continue; | 
 | 			} | 
 | 			/* Handles ISA memory hole space here */ | 
 | 			if (pci_addr == 0) { | 
 | 				isa_mb = cpu_addr; | 
 | 				isa_hole = memno; | 
 | 				if (primary || isa_mem_base == 0) | 
 | 					isa_mem_base = cpu_addr; | 
 | 				hose->isa_mem_phys = cpu_addr; | 
 | 				hose->isa_mem_size = size; | 
 | 			} | 
 |  | 
 | 			/* We get the PCI/Mem offset from the first range or | 
 | 			 * the, current one if the offset came from an ISA | 
 | 			 * hole. If they don't match, bugger. | 
 | 			 */ | 
 | 			if (memno == 0 || | 
 | 			    (isa_hole >= 0 && pci_addr != 0 && | 
 | 			     hose->pci_mem_offset == isa_mb)) | 
 | 				hose->pci_mem_offset = cpu_addr - pci_addr; | 
 | 			else if (pci_addr != 0 && | 
 | 				 hose->pci_mem_offset != cpu_addr - pci_addr) { | 
 | 				printk(KERN_INFO | 
 | 				       " \\--> Skipped (offset mismatch) !\n"); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			/* Build resource */ | 
 | 			res = &hose->mem_resources[memno++]; | 
 | 			res->flags = IORESOURCE_MEM; | 
 | 			if (pci_space & 0x40000000) | 
 | 				res->flags |= IORESOURCE_PREFETCH; | 
 | 			res->start = cpu_addr; | 
 | 			break; | 
 | 		} | 
 | 		if (res != NULL) { | 
 | 			res->name = dev->full_name; | 
 | 			res->end = res->start + size - 1; | 
 | 			res->parent = NULL; | 
 | 			res->sibling = NULL; | 
 | 			res->child = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* If there's an ISA hole and the pci_mem_offset is -not- matching | 
 | 	 * the ISA hole offset, then we need to remove the ISA hole from | 
 | 	 * the resource list for that brige | 
 | 	 */ | 
 | 	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) { | 
 | 		unsigned int next = isa_hole + 1; | 
 | 		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb); | 
 | 		if (next < memno) | 
 | 			memmove(&hose->mem_resources[isa_hole], | 
 | 				&hose->mem_resources[next], | 
 | 				sizeof(struct resource) * (memno - next)); | 
 | 		hose->mem_resources[--memno].flags = 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* Decide whether to display the domain number in /proc */ | 
 | int pci_proc_domain(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(bus); | 
 | #ifdef CONFIG_PPC64 | 
 | 	return hose->buid != 0; | 
 | #else | 
 | 	if (!(ppc_pci_flags & PPC_PCI_ENABLE_PROC_DOMAINS)) | 
 | 		return 0; | 
 | 	if (ppc_pci_flags & PPC_PCI_COMPAT_DOMAIN_0) | 
 | 		return hose->global_number != 0; | 
 | 	return 1; | 
 | #endif | 
 | } | 
 |  | 
 | void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, | 
 | 			     struct resource *res) | 
 | { | 
 | 	resource_size_t offset = 0, mask = (resource_size_t)-1; | 
 | 	struct pci_controller *hose = pci_bus_to_host(dev->bus); | 
 |  | 
 | 	if (!hose) | 
 | 		return; | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 		mask = 0xffffffffu; | 
 | 	} else if (res->flags & IORESOURCE_MEM) | 
 | 		offset = hose->pci_mem_offset; | 
 |  | 
 | 	region->start = (res->start - offset) & mask; | 
 | 	region->end = (res->end - offset) & mask; | 
 | } | 
 | EXPORT_SYMBOL(pcibios_resource_to_bus); | 
 |  | 
 | void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, | 
 | 			     struct pci_bus_region *region) | 
 | { | 
 | 	resource_size_t offset = 0, mask = (resource_size_t)-1; | 
 | 	struct pci_controller *hose = pci_bus_to_host(dev->bus); | 
 |  | 
 | 	if (!hose) | 
 | 		return; | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 		mask = 0xffffffffu; | 
 | 	} else if (res->flags & IORESOURCE_MEM) | 
 | 		offset = hose->pci_mem_offset; | 
 | 	res->start = (region->start + offset) & mask; | 
 | 	res->end = (region->end + offset) & mask; | 
 | } | 
 | EXPORT_SYMBOL(pcibios_bus_to_resource); | 
 |  | 
 | /* Fixup a bus resource into a linux resource */ | 
 | static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(dev->bus); | 
 | 	resource_size_t offset = 0, mask = (resource_size_t)-1; | 
 |  | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 		mask = 0xffffffffu; | 
 | 	} else if (res->flags & IORESOURCE_MEM) | 
 | 		offset = hose->pci_mem_offset; | 
 |  | 
 | 	res->start = (res->start + offset) & mask; | 
 | 	res->end = (res->end + offset) & mask; | 
 | } | 
 |  | 
 |  | 
 | /* This header fixup will do the resource fixup for all devices as they are | 
 |  * probed, but not for bridge ranges | 
 |  */ | 
 | static void __devinit pcibios_fixup_resources(struct pci_dev *dev) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(dev->bus); | 
 | 	int i; | 
 |  | 
 | 	if (!hose) { | 
 | 		printk(KERN_ERR "No host bridge for PCI dev %s !\n", | 
 | 		       pci_name(dev)); | 
 | 		return; | 
 | 	} | 
 | 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { | 
 | 		struct resource *res = dev->resource + i; | 
 | 		if (!res->flags) | 
 | 			continue; | 
 | 		/* On platforms that have PPC_PCI_PROBE_ONLY set, we don't | 
 | 		 * consider 0 as an unassigned BAR value. It's technically | 
 | 		 * a valid value, but linux doesn't like it... so when we can | 
 | 		 * re-assign things, we do so, but if we can't, we keep it | 
 | 		 * around and hope for the best... | 
 | 		 */ | 
 | 		if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) { | 
 | 			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n", | 
 | 				 pci_name(dev), i, | 
 | 				 (unsigned long long)res->start, | 
 | 				 (unsigned long long)res->end, | 
 | 				 (unsigned int)res->flags); | 
 | 			res->end -= res->start; | 
 | 			res->start = 0; | 
 | 			res->flags |= IORESOURCE_UNSET; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n", | 
 | 			 pci_name(dev), i, | 
 | 			 (unsigned long long)res->start,\ | 
 | 			 (unsigned long long)res->end, | 
 | 			 (unsigned int)res->flags); | 
 |  | 
 | 		fixup_resource(res, dev); | 
 |  | 
 | 		pr_debug("PCI:%s            %016llx-%016llx\n", | 
 | 			 pci_name(dev), | 
 | 			 (unsigned long long)res->start, | 
 | 			 (unsigned long long)res->end); | 
 | 	} | 
 |  | 
 | 	/* Call machine specific resource fixup */ | 
 | 	if (ppc_md.pcibios_fixup_resources) | 
 | 		ppc_md.pcibios_fixup_resources(dev); | 
 | } | 
 | DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); | 
 |  | 
 | /* This function tries to figure out if a bridge resource has been initialized | 
 |  * by the firmware or not. It doesn't have to be absolutely bullet proof, but | 
 |  * things go more smoothly when it gets it right. It should covers cases such | 
 |  * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges | 
 |  */ | 
 | static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus, | 
 | 							   struct resource *res) | 
 | { | 
 | 	struct pci_controller *hose = pci_bus_to_host(bus); | 
 | 	struct pci_dev *dev = bus->self; | 
 | 	resource_size_t offset; | 
 | 	u16 command; | 
 | 	int i; | 
 |  | 
 | 	/* We don't do anything if PCI_PROBE_ONLY is set */ | 
 | 	if (ppc_pci_flags & PPC_PCI_PROBE_ONLY) | 
 | 		return 0; | 
 |  | 
 | 	/* Job is a bit different between memory and IO */ | 
 | 	if (res->flags & IORESOURCE_MEM) { | 
 | 		/* If the BAR is non-0 (res != pci_mem_offset) then it's probably been | 
 | 		 * initialized by somebody | 
 | 		 */ | 
 | 		if (res->start != hose->pci_mem_offset) | 
 | 			return 0; | 
 |  | 
 | 		/* The BAR is 0, let's check if memory decoding is enabled on | 
 | 		 * the bridge. If not, we consider it unassigned | 
 | 		 */ | 
 | 		pci_read_config_word(dev, PCI_COMMAND, &command); | 
 | 		if ((command & PCI_COMMAND_MEMORY) == 0) | 
 | 			return 1; | 
 |  | 
 | 		/* Memory decoding is enabled and the BAR is 0. If any of the bridge | 
 | 		 * resources covers that starting address (0 then it's good enough for | 
 | 		 * us for memory | 
 | 		 */ | 
 | 		for (i = 0; i < 3; i++) { | 
 | 			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) && | 
 | 			    hose->mem_resources[i].start == hose->pci_mem_offset) | 
 | 				return 0; | 
 | 		} | 
 |  | 
 | 		/* Well, it starts at 0 and we know it will collide so we may as | 
 | 		 * well consider it as unassigned. That covers the Apple case. | 
 | 		 */ | 
 | 		return 1; | 
 | 	} else { | 
 | 		/* If the BAR is non-0, then we consider it assigned */ | 
 | 		offset = (unsigned long)hose->io_base_virt - _IO_BASE; | 
 | 		if (((res->start - offset) & 0xfffffffful) != 0) | 
 | 			return 0; | 
 |  | 
 | 		/* Here, we are a bit different than memory as typically IO space | 
 | 		 * starting at low addresses -is- valid. What we do instead if that | 
 | 		 * we consider as unassigned anything that doesn't have IO enabled | 
 | 		 * in the PCI command register, and that's it. | 
 | 		 */ | 
 | 		pci_read_config_word(dev, PCI_COMMAND, &command); | 
 | 		if (command & PCI_COMMAND_IO) | 
 | 			return 0; | 
 |  | 
 | 		/* It's starting at 0 and IO is disabled in the bridge, consider | 
 | 		 * it unassigned | 
 | 		 */ | 
 | 		return 1; | 
 | 	} | 
 | } | 
 |  | 
 | /* Fixup resources of a PCI<->PCI bridge */ | 
 | static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) | 
 | { | 
 | 	struct resource *res; | 
 | 	int i; | 
 |  | 
 | 	struct pci_dev *dev = bus->self; | 
 |  | 
 | 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { | 
 | 		if ((res = bus->resource[i]) == NULL) | 
 | 			continue; | 
 | 		if (!res->flags) | 
 | 			continue; | 
 | 		if (i >= 3 && bus->self->transparent) | 
 | 			continue; | 
 |  | 
 | 		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n", | 
 | 			 pci_name(dev), i, | 
 | 			 (unsigned long long)res->start,\ | 
 | 			 (unsigned long long)res->end, | 
 | 			 (unsigned int)res->flags); | 
 |  | 
 | 		/* Perform fixup */ | 
 | 		fixup_resource(res, dev); | 
 |  | 
 | 		/* Try to detect uninitialized P2P bridge resources, | 
 | 		 * and clear them out so they get re-assigned later | 
 | 		 */ | 
 | 		if (pcibios_uninitialized_bridge_resource(bus, res)) { | 
 | 			res->flags = 0; | 
 | 			pr_debug("PCI:%s            (unassigned)\n", pci_name(dev)); | 
 | 		} else { | 
 |  | 
 | 			pr_debug("PCI:%s            %016llx-%016llx\n", | 
 | 				 pci_name(dev), | 
 | 				 (unsigned long long)res->start, | 
 | 				 (unsigned long long)res->end); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void __devinit __pcibios_fixup_bus(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_dev *dev = bus->self; | 
 |  | 
 | 	pr_debug("PCI: Fixup bus %d (%s)\n", bus->number, dev ? pci_name(dev) : "PHB"); | 
 |  | 
 | 	/* Fixup PCI<->PCI bridges. Host bridges are handled separately, for | 
 | 	 * now differently between 32 and 64 bits. | 
 | 	 */ | 
 | 	if (dev != NULL) | 
 | 		pcibios_fixup_bridge(bus); | 
 |  | 
 | 	/* Additional setup that is different between 32 and 64 bits for now */ | 
 | 	pcibios_do_bus_setup(bus); | 
 |  | 
 | 	/* Platform specific bus fixups */ | 
 | 	if (ppc_md.pcibios_fixup_bus) | 
 | 		ppc_md.pcibios_fixup_bus(bus); | 
 |  | 
 | 	/* Read default IRQs and fixup if necessary */ | 
 | 	list_for_each_entry(dev, &bus->devices, bus_list) { | 
 | 		pci_read_irq_line(dev); | 
 | 		if (ppc_md.pci_irq_fixup) | 
 | 			ppc_md.pci_irq_fixup(dev); | 
 | 	} | 
 | } | 
 |  | 
 | void __devinit pcibios_fixup_bus(struct pci_bus *bus) | 
 | { | 
 | 	/* When called from the generic PCI probe, read PCI<->PCI bridge | 
 | 	 * bases before proceeding | 
 | 	 */ | 
 | 	if (bus->self != NULL) | 
 | 		pci_read_bridge_bases(bus); | 
 | 	__pcibios_fixup_bus(bus); | 
 | } | 
 | EXPORT_SYMBOL(pcibios_fixup_bus); | 
 |  | 
 | /* When building a bus from the OF tree rather than probing, we need a | 
 |  * slightly different version of the fixup which doesn't read the | 
 |  * bridge bases using config space accesses | 
 |  */ | 
 | void __devinit pcibios_fixup_of_probed_bus(struct pci_bus *bus) | 
 | { | 
 | 	__pcibios_fixup_bus(bus); | 
 | } | 
 |  | 
 | static int skip_isa_ioresource_align(struct pci_dev *dev) | 
 | { | 
 | 	if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) && | 
 | 	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA)) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * We need to avoid collisions with `mirrored' VGA ports | 
 |  * and other strange ISA hardware, so we always want the | 
 |  * addresses to be allocated in the 0x000-0x0ff region | 
 |  * modulo 0x400. | 
 |  * | 
 |  * Why? Because some silly external IO cards only decode | 
 |  * the low 10 bits of the IO address. The 0x00-0xff region | 
 |  * is reserved for motherboard devices that decode all 16 | 
 |  * bits, so it's ok to allocate at, say, 0x2800-0x28ff, | 
 |  * but we want to try to avoid allocating at 0x2900-0x2bff | 
 |  * which might have be mirrored at 0x0100-0x03ff.. | 
 |  */ | 
 | void pcibios_align_resource(void *data, struct resource *res, | 
 | 				resource_size_t size, resource_size_t align) | 
 | { | 
 | 	struct pci_dev *dev = data; | 
 |  | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		resource_size_t start = res->start; | 
 |  | 
 | 		if (skip_isa_ioresource_align(dev)) | 
 | 			return; | 
 | 		if (start & 0x300) { | 
 | 			start = (start + 0x3ff) & ~0x3ff; | 
 | 			res->start = start; | 
 | 		} | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(pcibios_align_resource); | 
 |  | 
 | /* | 
 |  * Reparent resource children of pr that conflict with res | 
 |  * under res, and make res replace those children. | 
 |  */ | 
 | static int __init reparent_resources(struct resource *parent, | 
 | 				     struct resource *res) | 
 | { | 
 | 	struct resource *p, **pp; | 
 | 	struct resource **firstpp = NULL; | 
 |  | 
 | 	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { | 
 | 		if (p->end < res->start) | 
 | 			continue; | 
 | 		if (res->end < p->start) | 
 | 			break; | 
 | 		if (p->start < res->start || p->end > res->end) | 
 | 			return -1;	/* not completely contained */ | 
 | 		if (firstpp == NULL) | 
 | 			firstpp = pp; | 
 | 	} | 
 | 	if (firstpp == NULL) | 
 | 		return -1;	/* didn't find any conflicting entries? */ | 
 | 	res->parent = parent; | 
 | 	res->child = *firstpp; | 
 | 	res->sibling = *pp; | 
 | 	*firstpp = res; | 
 | 	*pp = NULL; | 
 | 	for (p = res->child; p != NULL; p = p->sibling) { | 
 | 		p->parent = res; | 
 | 		DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n", | 
 | 		    p->name, | 
 | 		    (unsigned long long)p->start, | 
 | 		    (unsigned long long)p->end, res->name); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  *  Handle resources of PCI devices.  If the world were perfect, we could | 
 |  *  just allocate all the resource regions and do nothing more.  It isn't. | 
 |  *  On the other hand, we cannot just re-allocate all devices, as it would | 
 |  *  require us to know lots of host bridge internals.  So we attempt to | 
 |  *  keep as much of the original configuration as possible, but tweak it | 
 |  *  when it's found to be wrong. | 
 |  * | 
 |  *  Known BIOS problems we have to work around: | 
 |  *	- I/O or memory regions not configured | 
 |  *	- regions configured, but not enabled in the command register | 
 |  *	- bogus I/O addresses above 64K used | 
 |  *	- expansion ROMs left enabled (this may sound harmless, but given | 
 |  *	  the fact the PCI specs explicitly allow address decoders to be | 
 |  *	  shared between expansion ROMs and other resource regions, it's | 
 |  *	  at least dangerous) | 
 |  * | 
 |  *  Our solution: | 
 |  *	(1) Allocate resources for all buses behind PCI-to-PCI bridges. | 
 |  *	    This gives us fixed barriers on where we can allocate. | 
 |  *	(2) Allocate resources for all enabled devices.  If there is | 
 |  *	    a collision, just mark the resource as unallocated. Also | 
 |  *	    disable expansion ROMs during this step. | 
 |  *	(3) Try to allocate resources for disabled devices.  If the | 
 |  *	    resources were assigned correctly, everything goes well, | 
 |  *	    if they weren't, they won't disturb allocation of other | 
 |  *	    resources. | 
 |  *	(4) Assign new addresses to resources which were either | 
 |  *	    not configured at all or misconfigured.  If explicitly | 
 |  *	    requested by the user, configure expansion ROM address | 
 |  *	    as well. | 
 |  */ | 
 |  | 
 | static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) | 
 | { | 
 | 	struct pci_bus *bus; | 
 | 	int i; | 
 | 	struct resource *res, *pr; | 
 |  | 
 | 	/* Depth-First Search on bus tree */ | 
 | 	list_for_each_entry(bus, bus_list, node) { | 
 | 		for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { | 
 | 			if ((res = bus->resource[i]) == NULL || !res->flags | 
 | 			    || res->start > res->end) | 
 | 				continue; | 
 | 			if (bus->parent == NULL) | 
 | 				pr = (res->flags & IORESOURCE_IO) ? | 
 | 					&ioport_resource : &iomem_resource; | 
 | 			else { | 
 | 				/* Don't bother with non-root busses when | 
 | 				 * re-assigning all resources. We clear the | 
 | 				 * resource flags as if they were colliding | 
 | 				 * and as such ensure proper re-allocation | 
 | 				 * later. | 
 | 				 */ | 
 | 				if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC) | 
 | 					goto clear_resource; | 
 | 				pr = pci_find_parent_resource(bus->self, res); | 
 | 				if (pr == res) { | 
 | 					/* this happens when the generic PCI | 
 | 					 * code (wrongly) decides that this | 
 | 					 * bridge is transparent  -- paulus | 
 | 					 */ | 
 | 					continue; | 
 | 				} | 
 | 			} | 
 |  | 
 | 			DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx " | 
 | 			    "[0x%x], parent %p (%s)\n", | 
 | 			    bus->self ? pci_name(bus->self) : "PHB", | 
 | 			    bus->number, i, | 
 | 			    (unsigned long long)res->start, | 
 | 			    (unsigned long long)res->end, | 
 | 			    (unsigned int)res->flags, | 
 | 			    pr, (pr && pr->name) ? pr->name : "nil"); | 
 |  | 
 | 			if (pr && !(pr->flags & IORESOURCE_UNSET)) { | 
 | 				if (request_resource(pr, res) == 0) | 
 | 					continue; | 
 | 				/* | 
 | 				 * Must be a conflict with an existing entry. | 
 | 				 * Move that entry (or entries) under the | 
 | 				 * bridge resource and try again. | 
 | 				 */ | 
 | 				if (reparent_resources(pr, res) == 0) | 
 | 					continue; | 
 | 			} | 
 | 			printk(KERN_WARNING | 
 | 			       "PCI: Cannot allocate resource region " | 
 | 			       "%d of PCI bridge %d, will remap\n", | 
 | 			       i, bus->number); | 
 | clear_resource: | 
 | 			res->flags = 0; | 
 | 		} | 
 | 		pcibios_allocate_bus_resources(&bus->children); | 
 | 	} | 
 | } | 
 |  | 
 | static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) | 
 | { | 
 | 	struct resource *pr, *r = &dev->resource[idx]; | 
 |  | 
 | 	DBG("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n", | 
 | 	    pci_name(dev), idx, | 
 | 	    (unsigned long long)r->start, | 
 | 	    (unsigned long long)r->end, | 
 | 	    (unsigned int)r->flags); | 
 |  | 
 | 	pr = pci_find_parent_resource(dev, r); | 
 | 	if (!pr || (pr->flags & IORESOURCE_UNSET) || | 
 | 	    request_resource(pr, r) < 0) { | 
 | 		printk(KERN_WARNING "PCI: Cannot allocate resource region %d" | 
 | 		       " of device %s, will remap\n", idx, pci_name(dev)); | 
 | 		if (pr) | 
 | 			DBG("PCI:  parent is %p: %016llx-%016llx [%x]\n", pr, | 
 | 			    (unsigned long long)pr->start, | 
 | 			    (unsigned long long)pr->end, | 
 | 			    (unsigned int)pr->flags); | 
 | 		/* We'll assign a new address later */ | 
 | 		r->flags |= IORESOURCE_UNSET; | 
 | 		r->end -= r->start; | 
 | 		r->start = 0; | 
 | 	} | 
 | } | 
 |  | 
 | static void __init pcibios_allocate_resources(int pass) | 
 | { | 
 | 	struct pci_dev *dev = NULL; | 
 | 	int idx, disabled; | 
 | 	u16 command; | 
 | 	struct resource *r; | 
 |  | 
 | 	for_each_pci_dev(dev) { | 
 | 		pci_read_config_word(dev, PCI_COMMAND, &command); | 
 | 		for (idx = 0; idx < 6; idx++) { | 
 | 			r = &dev->resource[idx]; | 
 | 			if (r->parent)		/* Already allocated */ | 
 | 				continue; | 
 | 			if (!r->flags || (r->flags & IORESOURCE_UNSET)) | 
 | 				continue;	/* Not assigned at all */ | 
 | 			if (r->flags & IORESOURCE_IO) | 
 | 				disabled = !(command & PCI_COMMAND_IO); | 
 | 			else | 
 | 				disabled = !(command & PCI_COMMAND_MEMORY); | 
 | 			if (pass == disabled) | 
 | 				alloc_resource(dev, idx); | 
 | 		} | 
 | 		if (pass) | 
 | 			continue; | 
 | 		r = &dev->resource[PCI_ROM_RESOURCE]; | 
 | 		if (r->flags & IORESOURCE_ROM_ENABLE) { | 
 | 			/* Turn the ROM off, leave the resource region, | 
 | 			 * but keep it unregistered. | 
 | 			 */ | 
 | 			u32 reg; | 
 | 			DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); | 
 | 			r->flags &= ~IORESOURCE_ROM_ENABLE; | 
 | 			pci_read_config_dword(dev, dev->rom_base_reg, ®); | 
 | 			pci_write_config_dword(dev, dev->rom_base_reg, | 
 | 					       reg & ~PCI_ROM_ADDRESS_ENABLE); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void __init pcibios_resource_survey(void) | 
 | { | 
 | 	/* Allocate and assign resources. If we re-assign everything, then | 
 | 	 * we skip the allocate phase | 
 | 	 */ | 
 | 	pcibios_allocate_bus_resources(&pci_root_buses); | 
 |  | 
 | 	if (!(ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)) { | 
 | 		pcibios_allocate_resources(0); | 
 | 		pcibios_allocate_resources(1); | 
 | 	} | 
 |  | 
 | 	if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) { | 
 | 		DBG("PCI: Assigning unassigned resouces...\n"); | 
 | 		pci_assign_unassigned_resources(); | 
 | 	} | 
 |  | 
 | 	/* Call machine dependent fixup */ | 
 | 	if (ppc_md.pcibios_fixup) | 
 | 		ppc_md.pcibios_fixup(); | 
 | } | 
 |  | 
 | #ifdef CONFIG_HOTPLUG | 
 | /* This is used by the pSeries hotplug driver to allocate resource | 
 |  * of newly plugged busses. We can try to consolidate with the | 
 |  * rest of the code later, for now, keep it as-is | 
 |  */ | 
 | void __devinit pcibios_claim_one_bus(struct pci_bus *bus) | 
 | { | 
 | 	struct pci_dev *dev; | 
 | 	struct pci_bus *child_bus; | 
 |  | 
 | 	list_for_each_entry(dev, &bus->devices, bus_list) { | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < PCI_NUM_RESOURCES; i++) { | 
 | 			struct resource *r = &dev->resource[i]; | 
 |  | 
 | 			if (r->parent || !r->start || !r->flags) | 
 | 				continue; | 
 | 			pci_claim_resource(dev, i); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(child_bus, &bus->children, node) | 
 | 		pcibios_claim_one_bus(child_bus); | 
 | } | 
 | EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); | 
 | #endif /* CONFIG_HOTPLUG */ | 
 |  | 
 | int pcibios_enable_device(struct pci_dev *dev, int mask) | 
 | { | 
 | 	if (ppc_md.pcibios_enable_device_hook) | 
 | 		if (ppc_md.pcibios_enable_device_hook(dev)) | 
 | 			return -EINVAL; | 
 |  | 
 | 	return pci_enable_resources(dev, mask); | 
 | } |