Merge tag 'iio-fixes-for-3.16d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
4th set of fixes for IIO in the 3.16 cycle
* Fix incorrect handling of the iio_event_spec mask_shared_by_type
bitmap. The point of this was to allow multiple channels to specify
elements that lead to the same sysfs attribute. A but in the handling
meant that this failed. The handling is modified to be similar to that
used for the main IIO info_mask_shared_by_type which works correclty.
* The acceleration scale factors reported by the mma8452 driver gave
accelerations in g, wherease the IIO ABI is in m/s^2. The fix simply
corrects the reported scale factors.
diff --git a/Documentation/Changes b/Documentation/Changes
index 2254db0..227bec8 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -280,12 +280,9 @@
mcelog
------
-In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
-as a regular cronjob similar to the x86-64 kernel to process and log
-machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
-events are errors reported by the CPU. Processing them is strongly encouraged.
-All x86-64 kernels since 2.6.4 require the mcelog utility to
-process machine checks.
+On x86 kernels the mcelog utility is needed to process and log machine check
+events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
+by the CPU. Processing them is strongly encouraged.
Getting updated software
========================
diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl
index 4017f14..2c425d7 100644
--- a/Documentation/DocBook/gadget.tmpl
+++ b/Documentation/DocBook/gadget.tmpl
@@ -708,7 +708,7 @@
<para>Systems need specialized hardware support to implement OTG,
notably including a special <emphasis>Mini-AB</emphasis> jack
-and associated transciever to support <emphasis>Dual-Role</emphasis>
+and associated transceiver to support <emphasis>Dual-Role</emphasis>
operation:
they can act either as a host, using the standard
Linux-USB host side driver stack,
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index 46347f6..59fb5c0 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -182,7 +182,7 @@
<para>
Each interrupt is described by an interrupt descriptor structure
irq_desc. The interrupt is referenced by an 'unsigned int' numeric
- value which selects the corresponding interrupt decription structure
+ value which selects the corresponding interrupt description structure
in the descriptor structures array.
The descriptor structure contains status information and pointers
to the interrupt flow method and the interrupt chip structure
@@ -470,7 +470,7 @@
<para>
To avoid copies of identical implementations of IRQ chips the
core provides a configurable generic interrupt chip
- implementation. Developers should check carefuly whether the
+ implementation. Developers should check carefully whether the
generic chip fits their needs before implementing the same
functionality slightly differently themselves.
</para>
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 19f2a5a..e584ee1 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1760,7 +1760,7 @@
</para>
<para>
-There is a furthur optimization possible here: remember our original
+There is a further optimization possible here: remember our original
cache code, where there were no reference counts and the caller simply
held the lock whenever using the object? This is still possible: if
you hold the lock, no one can delete the object, so you don't need to
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index deb71ba..d7fcdc5 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -677,7 +677,7 @@
<listitem>
<para>
- ATA_QCFLAG_ACTIVE is clared from qc->flags.
+ ATA_QCFLAG_ACTIVE is cleared from qc->flags.
</para>
</listitem>
@@ -708,7 +708,7 @@
<listitem>
<para>
- qc->waiting is claread & completed (in that order).
+ qc->waiting is cleared & completed (in that order).
</para>
</listitem>
@@ -1163,7 +1163,7 @@
<para>
Once sense data is acquired, this type of errors can be
- handled similary to other SCSI errors. Note that sense data
+ handled similarly to other SCSI errors. Note that sense data
may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
&& ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
cases, the error should be considered as an ATA bus error and
diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl
index 4decb46..03f9a1f 100644
--- a/Documentation/DocBook/media_api.tmpl
+++ b/Documentation/DocBook/media_api.tmpl
@@ -68,7 +68,7 @@
several digital tv standards. While it is called as DVB API,
in fact it covers several different video standards including
DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
- to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
+ to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
<para>The third part covers the Remote Controller API.</para>
<para>The fourth part covers the Media Controller API.</para>
<para>For additional information and for the latest development code,
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index cd11926..7da8f04 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -91,7 +91,7 @@
<listitem><para>
[MTD Interface]</para><para>
These functions provide the interface to the MTD kernel API.
- They are not replacable and provide functionality
+ They are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
@@ -100,14 +100,14 @@
</para></listitem>
<listitem><para>
[GENERIC]</para><para>
- Generic functions are not replacable and provide functionality
+ Generic functions are not replaceable and provide functionality
which is complete hardware independent.
</para></listitem>
<listitem><para>
[DEFAULT]</para><para>
Default functions provide hardware related functionality which is suitable
for most of the implementations. These functions can be replaced by the
- board driver if neccecary. Those functions are called via pointers in the
+ board driver if necessary. Those functions are called via pointers in the
NAND chip description structure. The board driver can set the functions which
should be replaced by board dependent functions before calling nand_scan().
If the function pointer is NULL on entry to nand_scan() then the pointer
@@ -264,7 +264,7 @@
is set up nand_scan() is called. This function tries to
detect and identify then chip. If a chip is found all the
internal data fields are initialized accordingly.
- The structure(s) have to be zeroed out first and then filled with the neccecary
+ The structure(s) have to be zeroed out first and then filled with the necessary
information about the device.
</para>
<programlisting>
@@ -327,7 +327,7 @@
<sect1 id="Exit_function">
<title>Exit function</title>
<para>
- The exit function is only neccecary if the driver is
+ The exit function is only necessary if the driver is
compiled as a module. It releases all resources which
are held by the chip driver and unregisters the partitions
in the MTD layer.
@@ -494,7 +494,7 @@
in this case. See rts_from4.c and diskonchip.c for
implementation reference. In those cases we must also
use bad block tables on FLASH, because the ECC layout is
- interferring with the bad block marker positions.
+ interfering with the bad block marker positions.
See bad block table support for details.
</para>
</sect2>
@@ -542,7 +542,7 @@
<para>
nand_scan() calls the function nand_default_bbt().
nand_default_bbt() selects appropriate default
- bad block table desriptors depending on the chip information
+ bad block table descriptors depending on the chip information
which was retrieved by nand_scan().
</para>
<para>
@@ -554,7 +554,7 @@
<sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
- It may be desired or neccecary to keep a bad block table in FLASH.
+ It may be desired or necessary to keep a bad block table in FLASH.
For AG-AND chips this is mandatory, as they have no factory marked
bad blocks. They have factory marked good blocks. The marker pattern
is erased when the block is erased to be reused. So in case of
@@ -565,10 +565,10 @@
of the blocks.
</para>
<para>
- The blocks in which the tables are stored are procteted against
+ The blocks in which the tables are stored are protected against
accidental access by marking them bad in the memory bad block
table. The bad block table management functions are allowed
- to circumvernt this protection.
+ to circumvent this protection.
</para>
<para>
The simplest way to activate the FLASH based bad block table support
@@ -592,7 +592,7 @@
User defined tables are created by filling out a
nand_bbt_descr structure and storing the pointer in the
nand_chip structure member bbt_td before calling nand_scan().
- If a mirror table is neccecary a second structure must be
+ If a mirror table is necessary a second structure must be
created and a pointer to this structure must be stored
in bbt_md inside the nand_chip structure. If the bbt_md
member is set to NULL then only the main table is used
@@ -666,7 +666,7 @@
<para>
For automatic placement some blocks must be reserved for
bad block table storage. The number of reserved blocks is defined
- in the maxblocks member of the babd block table description structure.
+ in the maxblocks member of the bad block table description structure.
Reserving 4 blocks for mirrored tables should be a reasonable number.
This also limits the number of blocks which are scanned for the bad
block table ident pattern.
@@ -1068,11 +1068,11 @@
<chapter id="filesystems">
<title>Filesystem support</title>
<para>
- The NAND driver provides all neccecary functions for a
+ The NAND driver provides all necessary functions for a
filesystem via the MTD interface.
</para>
<para>
- Filesystems must be aware of the NAND pecularities and
+ Filesystems must be aware of the NAND peculiarities and
restrictions. One major restrictions of NAND Flash is, that you cannot
write as often as you want to a page. The consecutive writes to a page,
before erasing it again, are restricted to 1-3 writes, depending on the
@@ -1222,7 +1222,7 @@
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
-/* Write bbt if neccecary */
+/* Write bbt if necessary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00002000
diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl
index 346e552..3b08a08 100644
--- a/Documentation/DocBook/regulator.tmpl
+++ b/Documentation/DocBook/regulator.tmpl
@@ -155,7 +155,7 @@
release regulators. Functions are
provided to <link linkend='API-regulator-enable'>enable</link>
and <link linkend='API-regulator-disable'>disable</link> the
- reguator and to get and set the runtime parameters of the
+ regulator and to get and set the runtime parameters of the
regulator.
</para>
<para>
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 9561815..bbe9c1f 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -766,10 +766,10 @@
<para>
The dynamic memory regions will be allocated when the UIO device file,
<varname>/dev/uioX</varname> is opened.
- Simiar to static memory resources, the memory region information for
+ Similar to static memory resources, the memory region information for
dynamic regions is then visible via sysfs at
<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
- The dynmaic memory regions will be freed when the UIO device file is
+ The dynamic memory regions will be freed when the UIO device file is
closed. When no processes are holding the device file open, the address
returned to userspace is ~0.
</para>
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 8d57c18..85fc0e2 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -153,7 +153,7 @@
<listitem><para>The Linux USB API supports synchronous calls for
control and bulk messages.
- It also supports asynchnous calls for all kinds of data transfer,
+ It also supports asynchronous calls for all kinds of data transfer,
using request structures called "URBs" (USB Request Blocks).
</para></listitem>
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index d0056a4..6f639d9 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -5696,7 +5696,7 @@
suspending the PCM operations via
<function>snd_pcm_suspend_all()</function> or
<function>snd_pcm_suspend()</function>. It means that the PCM
- streams are already stoppped when the register snapshot is
+ streams are already stopped when the register snapshot is
taken. But, remember that you don't have to restart the PCM
stream in the resume callback. It'll be restarted via
trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>
diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt
index e742d21..a69ffe1 100644
--- a/Documentation/cpu-freq/intel-pstate.txt
+++ b/Documentation/cpu-freq/intel-pstate.txt
@@ -15,10 +15,13 @@
/sys/devices/system/cpu/intel_pstate/
max_perf_pct: limits the maximum P state that will be requested by
- the driver stated as a percentage of the available performance.
+ the driver stated as a percentage of the available performance. The
+ available (P states) performance may be reduced by the no_turbo
+ setting described below.
min_perf_pct: limits the minimum P state that will be requested by
- the driver stated as a percentage of the available performance.
+ the driver stated as a percentage of the max (non-turbo)
+ performance level.
no_turbo: limits the driver to selecting P states below the turbo
frequency range.
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 5216b41..8b4f7b7f 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -9,6 +9,18 @@
- reg: physical base address of the controller and length of memory mapped
region.
+Optional Properties:
+- clocks: List of clock handles. The parent clocks of the input clocks to the
+ devices in this power domain are set to oscclk before power gating
+ and restored back after powering on a domain. This is required for
+ all domains which are powered on and off and not required for unused
+ domains.
+- clock-names: The following clocks can be specified:
+ - oscclk: Oscillator clock.
+ - pclkN, clkN: Pairs of parent of input clock and input clock to the
+ devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
+ are supported currently.
+
Node of a device using power domains must have a samsung,power-domain property
defined with a phandle to respective power domain.
@@ -19,6 +31,14 @@
reg = <0x10023C00 0x10>;
};
+ mfc_pd: power-domain@10044060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044060 0x20>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+ <&clock CLK_MOUT_USER_ACLK333>;
+ clock-names = "oscclk", "pclk0", "clk0";
+ };
+
Example of the node using power domain:
node {
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 64fd7de..b355660 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -4,6 +4,13 @@
- compatible: Must contain one of the following:
+ - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
+ - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
+ - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
+ - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
+ - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
+ - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+ - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index d13b9a9..d399ae1 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -8,8 +8,8 @@
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
-hpfall.c
- - (HP) laptop accelerometer program for disk protection.
+freefall.c
+ - (HP/DELL) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/freefall.c
similarity index 65%
rename from Documentation/laptops/hpfall.c
rename to Documentation/laptops/freefall.c
index b85dbba..aab2ff0 100644
--- a/Documentation/laptops/hpfall.c
+++ b/Documentation/laptops/freefall.c
@@ -1,7 +1,9 @@
-/* Disk protection for HP machines.
+/* Disk protection for HP/DELL machines.
*
* Copyright 2008 Eric Piel
* Copyright 2009 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2012 Sonal Santan
+ * Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
*
* GPLv2.
*/
@@ -18,24 +20,31 @@
#include <signal.h>
#include <sys/mman.h>
#include <sched.h>
+#include <syslog.h>
-char unload_heads_path[64];
+static int noled;
+static char unload_heads_path[64];
+static char device_path[32];
+static const char app_name[] = "FREE FALL";
-int set_unload_heads_path(char *device)
+static int set_unload_heads_path(char *device)
{
char devname[64];
if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
return -EINVAL;
- strncpy(devname, device + 5, sizeof(devname));
+ strncpy(devname, device + 5, sizeof(devname) - 1);
+ strncpy(device_path, device, sizeof(device_path) - 1);
snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
"/sys/block/%s/device/unload_heads", devname);
return 0;
}
-int valid_disk(void)
+
+static int valid_disk(void)
{
int fd = open(unload_heads_path, O_RDONLY);
+
if (fd < 0) {
perror(unload_heads_path);
return 0;
@@ -45,43 +54,54 @@
return 1;
}
-void write_int(char *path, int i)
+static void write_int(char *path, int i)
{
char buf[1024];
int fd = open(path, O_RDWR);
+
if (fd < 0) {
perror("open");
exit(1);
}
+
sprintf(buf, "%d", i);
+
if (write(fd, buf, strlen(buf)) != strlen(buf)) {
perror("write");
exit(1);
}
+
close(fd);
}
-void set_led(int on)
+static void set_led(int on)
{
+ if (noled)
+ return;
write_int("/sys/class/leds/hp::hddprotect/brightness", on);
}
-void protect(int seconds)
+static void protect(int seconds)
{
+ const char *str = (seconds == 0) ? "Unparked" : "Parked";
+
write_int(unload_heads_path, seconds*1000);
+ syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
}
-int on_ac(void)
+static int on_ac(void)
{
-// /sys/class/power_supply/AC0/online
+ /* /sys/class/power_supply/AC0/online */
+ return 1;
}
-int lid_open(void)
+static int lid_open(void)
{
-// /proc/acpi/button/lid/LID/state
+ /* /proc/acpi/button/lid/LID/state */
+ return 1;
}
-void ignore_me(void)
+static void ignore_me(int signum)
{
protect(0);
set_led(0);
@@ -90,6 +110,7 @@
int main(int argc, char **argv)
{
int fd, ret;
+ struct stat st;
struct sched_param param;
if (argc == 1)
@@ -111,7 +132,16 @@
return EXIT_FAILURE;
}
- daemon(0, 0);
+ if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
+ noled = 1;
+
+ if (daemon(0, 0) != 0) {
+ perror("daemon");
+ return EXIT_FAILURE;
+ }
+
+ openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
+
param.sched_priority = sched_get_priority_max(SCHED_FIFO);
sched_setscheduler(0, SCHED_FIFO, ¶m);
mlockall(MCL_CURRENT|MCL_FUTURE);
@@ -141,6 +171,7 @@
alarm(20);
}
+ closelog();
close(fd);
return EXIT_SUCCESS;
}
diff --git a/MAINTAINERS b/MAINTAINERS
index 6813d0a..e31c874 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1314,6 +1314,20 @@
Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
+F: arch/arm/boot/dts/emev2*
+F: arch/arm/boot/dts/r7s*
+F: arch/arm/boot/dts/r8a*
+F: arch/arm/boot/dts/sh*
+F: arch/arm/configs/ape6evm_defconfig
+F: arch/arm/configs/armadillo800eva_defconfig
+F: arch/arm/configs/bockw_defconfig
+F: arch/arm/configs/genmai_defconfig
+F: arch/arm/configs/koelsch_defconfig
+F: arch/arm/configs/kzm9g_defconfig
+F: arch/arm/configs/lager_defconfig
+F: arch/arm/configs/mackerel_defconfig
+F: arch/arm/configs/marzen_defconfig
+F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
@@ -6787,7 +6801,7 @@
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
-M: Shawn Guo <shawn.guo@linaro.org>
+M: Shawn Guo <shawn.guo@freescale.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -8984,7 +8998,7 @@
THERMAL
M: Zhang Rui <rui.zhang@intel.com>
-M: Eduardo Valentin <eduardo.valentin@ti.com>
+M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
@@ -9011,7 +9025,7 @@
F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
-M: Eduardo Valentin <eduardo.valentin@ti.com>
+M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/thermal/ti-soc-thermal/
diff --git a/Makefile b/Makefile
index 4d75b4b..f3c543d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
@@ -41,6 +41,29 @@
# descending is started. They are now explicitly listed as the
# prepare rule.
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
@@ -51,6 +74,29 @@
KBUILD_VERBOSE = 0
endif
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
@@ -128,8 +174,11 @@
# Fake the "Entering directory" message once, so that IDEs/editors are
# able to understand relative filenames.
+ echodir := @echo
+ quiet_echodir := @echo
+silent_echodir := @:
sub-make: FORCE
- @echo "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
+ $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
@@ -292,52 +341,6 @@
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-# $(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
- quiet =
- Q =
-else
- quiet=quiet_
- Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
-ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
- quiet=silent_
-endif
-else # make-3.8x
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
- quiet=silent_
-endif
-endif
-
-export quiet Q KBUILD_VERBOSE
-
ifneq ($(CC),)
ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
COMPILER := clang
@@ -1173,7 +1176,7 @@
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
-package-dir := $(srctree)/scripts/package
+package-dir := scripts/package
%src-pkg: FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index ecb2677..e2156a5 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -529,8 +529,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
- tx-num-evt = <1>;
- rx-num-evt = <1>;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
};
&tps {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index ab9a34c..80a3b21 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -560,8 +560,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
- tx-num-evt = <1>;
- rx-num-evt = <1>;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
};
&tscadc {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 8a0a72d..a1a0cc5 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -105,10 +105,16 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rmii";
+};
+
+&phy_sel {
+ rmii-clock-ext;
};
&elm {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index d6133f4..2ebc421 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1045,6 +1045,8 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&usb>, <&udphs_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
ep0 {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 4adc280..8308954 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -240,6 +240,7 @@
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index c90c76d..dc7a292 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -673,10 +673,12 @@
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x0100>;
clocks = <&dpll_core_h12x2_ck>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
l4_root_clk_div: l4_root_clk_div {
@@ -684,7 +686,7 @@
compatible = "fixed-factor-clock";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
- clock-div = <1>;
+ clock-div = <2>;
};
video1_clk2_div: video1_clk2_div {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index fbaf426..17b22e9 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -554,7 +554,7 @@
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e385322..1595722 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -167,7 +167,7 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@@ -260,6 +260,9 @@
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+ <&clock CLK_MOUT_USER_ACLK333>;
+ clock-names = "oscclk", "pclk0", "clk0";
};
disp_pd: power-domain@100440C0 {
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index 9db4b65..cb14242 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -74,8 +74,6 @@
TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
- TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
- TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
@@ -103,8 +101,6 @@
TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
- TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
- TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
TEST_R( op "eq r",11,VAL1,", #0xf5") \
TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
TEST_R( op " r",8, VAL2,", #0x000af000")
@@ -125,7 +121,6 @@
TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
- TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
TEST( op "eq" s " r0, #0xf5") \
TEST( op "ne" s " r11, #0xf5000000") \
TEST( op s " r7, #0x000af000") \
@@ -159,12 +154,19 @@
TEST_SUPPORTED("cmp pc, #0x1000");
TEST_SUPPORTED("cmp sp, #0x1000");
- /* Data-processing with PC as shift*/
+ /* Data-processing with PC and a shift count in a register */
TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc")
TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe151021f) " @ cmp r1, pc, lsl r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe17f0211) " @ cmn pc, r1, lsl r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) " @ mov r1, pc, lsl r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) " @ mov pc, r1, lsl r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe042131f) " @ sub r1, r2, pc, lsl r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) " @ bic r1, pc, r2, lsl r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe081f312) " @ add pc, r1, r2, lsl r3")
- /* Data-processing with PC as shift*/
+ /* Data-processing with PC as a target and status registers updated */
TEST_UNSUPPORTED("movs pc, r1")
TEST_UNSUPPORTED("movs pc, r1, lsl r2")
TEST_UNSUPPORTED("movs pc, #0x10000")
@@ -187,14 +189,14 @@
TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
TEST_BF_R ("mov pc, r",0,2f,"")
- TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
+ TEST_BF_R ("add pc, pc, r",14,(2f-1f-8)*2,", asr #1")
TEST_BB( "sub pc, pc, #1b-2b+8")
#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
- TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
+ TEST_R( "add pc, pc, r",10,-2,", asl #1")
#ifdef CONFIG_THUMB2_KERNEL
TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
@@ -216,6 +218,7 @@
TEST_BB_R("bx r",7,2f,"")
TEST_BF_R("bxeq r",14,2f,"")
+#if __LINUX_ARM_ARCH__ >= 5
TEST_R("clz r0, r",0, 0x0,"")
TEST_R("clzeq r7, r",14,0x1,"")
TEST_R("clz lr, r",7, 0xffffffff,"")
@@ -337,6 +340,7 @@
TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
+#endif
TEST_GROUP("Multiply and multiply-accumulate")
@@ -559,6 +563,7 @@
TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
#endif
+#if __LINUX_ARM_ARCH__ >= 5
TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
@@ -595,6 +600,7 @@
TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!")
TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48")
TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48")
+#endif
TEST_GROUP("Miscellaneous")
@@ -1227,7 +1233,9 @@
TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
+#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
+#endif
TEST_UNSUPPORTED("svc 0")
TEST_UNSUPPORTED("svc 0xffffff")
@@ -1287,7 +1295,9 @@
TEST( "blx __dummy_thumb_subroutine_odd")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
+#if __LINUX_ARM_ARCH__ >= 5
COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
+#endif
#if __LINUX_ARM_ARCH__ >= 6
COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
#endif
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
index 3796399..08d7312 100644
--- a/arch/arm/kernel/kprobes-test.c
+++ b/arch/arm/kernel/kprobes-test.c
@@ -225,6 +225,7 @@
static int post_handler_called;
static int jprobe_func_called;
static int kretprobe_handler_called;
+static int tests_failed;
#define FUNC_ARG1 0x12345678
#define FUNC_ARG2 0xabcdef
@@ -461,6 +462,13 @@
pr_info(" jprobe\n");
ret = test_jprobe(func);
+#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE)
+ if (ret == -EINVAL) {
+ pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n");
+ tests_failed = ret;
+ ret = 0;
+ }
+#endif
if (ret < 0)
return ret;
@@ -1672,6 +1680,8 @@
out:
if (ret == 0)
+ ret = tests_failed;
+ if (ret == 0)
pr_info("Finished kprobe tests OK\n");
else
pr_err("kprobe tests failed\n");
diff --git a/arch/arm/kernel/probes-arm.c b/arch/arm/kernel/probes-arm.c
index 51a13a0..8eaef81 100644
--- a/arch/arm/kernel/probes-arm.c
+++ b/arch/arm/kernel/probes-arm.c
@@ -341,12 +341,12 @@
/* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
/* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG,
- REGS(ANY, 0, NOPC, 0, ANY)),
+ REGS(NOPC, 0, NOPC, 0, NOPC)),
/* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
/* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG,
- REGS(0, ANY, NOPC, 0, ANY)),
+ REGS(0, NOPC, NOPC, 0, NOPC)),
/* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
/* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
@@ -359,7 +359,7 @@
/* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
/* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
DECODE_EMULATEX (0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
- REGS(ANY, ANY, NOPC, 0, ANY)),
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
DECODE_END
};
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index f38cf7c..46d893f 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -173,10 +173,8 @@
void __init exynos_cpuidle_init(void)
{
- if (soc_is_exynos5440())
- return;
-
- platform_device_register(&exynos_cpuidle);
+ if (soc_is_exynos4210() || soc_is_exynos5250())
+ platform_device_register(&exynos_cpuidle);
}
void __init exynos_cpufreq_init(void)
@@ -297,7 +295,7 @@
* This is called from smp_prepare_cpus if we've built for SMP, but
* we still need to set it up for PM and firmware ops if not.
*/
- if (!IS_ENABLED(SMP))
+ if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
exynos_cpuidle_init();
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index eb91d23..e8797bb 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -57,8 +57,13 @@
boot_reg = sysram_ns_base_addr + 0x1c;
- if (!soc_is_exynos4212() && !soc_is_exynos3250())
- boot_reg += 4*cpu;
+ /*
+ * Almost all Exynos-series of SoCs that run in secure mode don't need
+ * additional offset for every CPU, with Exynos4412 being the only
+ * exception.
+ */
+ if (soc_is_exynos4412())
+ boot_reg += 4 * cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index fe6570e..797cb13 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_domain.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -24,6 +25,8 @@
#include "regs-pmu.h"
+#define MAX_CLK_PER_DOMAIN 4
+
/*
* Exynos specific wrapper around the generic power domain
*/
@@ -32,6 +35,9 @@
char const *name;
bool is_off;
struct generic_pm_domain pd;
+ struct clk *oscclk;
+ struct clk *clk[MAX_CLK_PER_DOMAIN];
+ struct clk *pclk[MAX_CLK_PER_DOMAIN];
};
static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@@ -44,6 +50,19 @@
pd = container_of(domain, struct exynos_pm_domain, pd);
base = pd->base;
+ /* Set oscclk before powering off a domain*/
+ if (!power_on) {
+ int i;
+
+ for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+ if (IS_ERR(pd->clk[i]))
+ break;
+ if (clk_set_parent(pd->clk[i], pd->oscclk))
+ pr_err("%s: error setting oscclk as parent to clock %d\n",
+ pd->name, i);
+ }
+ }
+
pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
__raw_writel(pwr, base);
@@ -60,6 +79,20 @@
cpu_relax();
usleep_range(80, 100);
}
+
+ /* Restore clocks after powering on a domain*/
+ if (power_on) {
+ int i;
+
+ for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+ if (IS_ERR(pd->clk[i]))
+ break;
+ if (clk_set_parent(pd->clk[i], pd->pclk[i]))
+ pr_err("%s: error setting parent to clock%d\n",
+ pd->name, i);
+ }
+ }
+
return 0;
}
@@ -152,9 +185,11 @@
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct exynos_pm_domain *pd;
- int on;
+ int on, i;
+ struct device *dev;
pdev = of_find_device_by_node(np);
+ dev = &pdev->dev;
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
@@ -170,6 +205,30 @@
pd->pd.power_on = exynos_pd_power_on;
pd->pd.of_node = np;
+ pd->oscclk = clk_get(dev, "oscclk");
+ if (IS_ERR(pd->oscclk))
+ goto no_clk;
+
+ for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+ char clk_name[8];
+
+ snprintf(clk_name, sizeof(clk_name), "clk%d", i);
+ pd->clk[i] = clk_get(dev, clk_name);
+ if (IS_ERR(pd->clk[i]))
+ break;
+ snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
+ pd->pclk[i] = clk_get(dev, clk_name);
+ if (IS_ERR(pd->pclk[i])) {
+ clk_put(pd->clk[i]);
+ pd->clk[i] = ERR_PTR(-EINVAL);
+ break;
+ }
+ }
+
+ if (IS_ERR(pd->clk[0]))
+ clk_put(pd->oscclk);
+
+no_clk:
platform_set_drvdata(pdev, pd);
on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index 4ba587d..84acdfd 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -67,8 +67,12 @@
spin_lock_irqsave(gate->lock, flags);
- if (gate->share_count && --(*gate->share_count) > 0)
- goto out;
+ if (gate->share_count) {
+ if (WARN_ON(*gate->share_count == 0))
+ goto out;
+ else if (--(*gate->share_count) > 0)
+ goto out;
+ }
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
@@ -78,19 +82,26 @@
spin_unlock_irqrestore(gate->lock, flags);
}
-static int clk_gate2_is_enabled(struct clk_hw *hw)
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
{
- u32 reg;
- struct clk_gate2 *gate = to_clk_gate2(hw);
+ u32 val = readl(reg);
- reg = readl(gate->reg);
-
- if (((reg >> gate->bit_idx) & 1) == 1)
+ if (((val >> bit_idx) & 1) == 1)
return 1;
return 0;
}
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+
+ if (gate->share_count)
+ return !!(*gate->share_count);
+ else
+ return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
@@ -116,6 +127,10 @@
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
+
+ /* Initialize share_count per hardware state */
+ if (share_count)
+ *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
gate->share_count = share_count;
init.name = name;
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 332af92..67fd26a 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -76,7 +76,7 @@
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
-static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
{
struct dpll_data *dd;
long fint, fint_min, fint_max;
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 04dab2f..ee6c784 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -26,11 +26,14 @@
#define OMAP3430_EN_WDT3_SHIFT 12
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4
#define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4)
#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3
+#define OMAP3430_EN_IVA2_DPLL_SHIFT 0
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0)
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0
#define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_IVA2_CLK_SRC_SHIFT 19
#define OMAP3430_IVA2_CLK_SRC_WIDTH 3
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index b2d252b..dc571f1 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -162,7 +162,8 @@
}
#endif
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_restart(enum reboot_mode mode, const char *cmd);
#else
static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 592ba0a..b6f8f34 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -297,33 +297,6 @@
static inline void omap_init_audio(void) {}
#endif
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
- defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
-
-static struct platform_device omap_hdmi_audio = {
- .name = "omap-hdmi-audio",
- .id = -1,
-};
-
-static void __init omap_init_hdmi_audio(void)
-{
- struct omap_hwmod *oh;
- struct platform_device *pdev;
-
- oh = omap_hwmod_lookup("dss_hdmi");
- if (!oh)
- return;
-
- pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
- WARN(IS_ERR(pdev),
- "Can't build omap_device for omap-hdmi-audio-dai.\n");
-
- platform_device_register(&omap_hdmi_audio);
-}
-#else
-static inline void omap_init_hdmi_audio(void) {}
-#endif
-
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -459,7 +432,6 @@
*/
omap_init_audio();
omap_init_camera();
- omap_init_hdmi_audio();
omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index b8208b4..f7492df 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -29,6 +29,7 @@
#ifdef CONFIG_TIDSPBRIDGE_DVFS
#include "omap-pm.h"
#endif
+#include "soc.h"
#include <linux/platform_data/dsp-omap.h>
@@ -59,6 +60,9 @@
phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
phys_addr_t paddr;
+ if (!cpu_is_omap34xx())
+ return;
+
if (!size)
return;
@@ -83,6 +87,9 @@
int err = -ENOMEM;
struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
+ if (!cpu_is_omap34xx())
+ return 0;
+
pdata->phys_mempool_base = omap_dsp_get_mempool_base();
if (pdata->phys_mempool_base) {
@@ -115,6 +122,9 @@
static void __exit omap_dsp_exit(void)
{
+ if (!cpu_is_omap34xx())
+ return;
+
platform_device_unregister(omap_dsp_pdev);
}
module_exit(omap_dsp_exit);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2c0c281..8bc1338 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1615,7 +1615,7 @@
return ret;
}
- for_each_child_of_node(pdev->dev.of_node, child) {
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 20b4398..284324f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1268,9 +1268,6 @@
};
/* sata */
-static struct omap_hwmod_opt_clk sata_opt_clks[] = {
- { .role = "ref_clk", .clk = "sata_ref_clk" },
-};
static struct omap_hwmod dra7xx_sata_hwmod = {
.name = "sata",
@@ -1278,6 +1275,7 @@
.clkdm_name = "l3init_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "func_48m_fclk",
+ .mpu_rt_idx = 1,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
@@ -1285,8 +1283,6 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
- .opt_clks = sata_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks),
};
/*
@@ -1731,8 +1727,20 @@
*
*/
+static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
.name = "usb_otg_ss",
+ .sysc = &dra7xx_usb_otg_ss_sysc,
};
/* usb_otg_ss1 */
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 106132d..cbefbd7 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -35,6 +35,8 @@
#define OMAP3430_LOGICSTATEST_MASK (1 << 2)
#define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2)
#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0)
+#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9)
#define OMAP3630_GRPSEL_UART4_MASK (1 << 18)
#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17)
#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16)
@@ -42,6 +44,10 @@
#define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14)
#define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13)
#define OMAP3430_GRPSEL_UART3_MASK (1 << 11)
+#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6)
#define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2)
#define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1)
#define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 076172b..7c3fb41 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -664,7 +664,7 @@
static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
{
- unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
+ unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
if (rev >= L310_CACHE_ID_RTL_R2P0) {
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 993bce5..902eb70 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -56,6 +56,8 @@
#define TASK_SIZE_32 UL(0x100000000)
#define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \
TASK_SIZE_32 : TASK_SIZE_64)
+#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+ TASK_SIZE_32 : TASK_SIZE_64)
#else
#define TASK_SIZE TASK_SIZE_64
#endif /* CONFIG_COMPAT */
diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c
index 9aecbac..13bbc3be 100644
--- a/arch/arm64/mm/copypage.c
+++ b/arch/arm64/mm/copypage.c
@@ -27,8 +27,10 @@
copy_page(kto, kfrom);
__flush_dcache_area(kto, PAGE_SIZE);
}
+EXPORT_SYMBOL_GPL(__cpu_copy_user_page);
void __cpu_clear_user_page(void *kaddr, unsigned long vaddr)
{
clear_page(kaddr);
}
+EXPORT_SYMBOL_GPL(__cpu_clear_user_page);
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index dbb118e..a547884 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -921,7 +921,8 @@
jls 1f
lsrl #1,%d1
1:
- movel %d1,m68k_init_mapped_size
+ lea %pc@(m68k_init_mapped_size),%a0
+ movel %d1,%a0@
mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\
%pc@(m68k_supervisor_cachemode)
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 958f1ad..3857737 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -11,6 +11,7 @@
*/
#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -30,6 +31,7 @@
unsigned long (*mach_random_get_entropy)(void);
+EXPORT_SYMBOL_GPL(mach_random_get_entropy);
/*
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index 608716f..af3bc35 100644
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -1210,7 +1210,8 @@
{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"},
{HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"},
{HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"},
- {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"},
+ {HPHW_FIO, 0x076, 0x000AD, 0x0, "Crestone Peak Core RS-232"},
+ {HPHW_FIO, 0x077, 0x000AD, 0x0, "Crestone Peak Fast? Core RS-232"},
{HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"},
{HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"},
{HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"},
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index bb9f3b6..93c1963 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -4,6 +4,7 @@
* Copyright (C) 2000-2001 Hewlett Packard Company
* Copyright (C) 2000 John Marvin
* Copyright (C) 2001 Matthew Wilcox
+ * Copyright (C) 2014 Helge Deller <deller@gmx.de>
*
* These routines maintain argument size conversion between 32bit and 64bit
* environment. Based heavily on sys_ia32.c and sys_sparc32.c.
@@ -11,44 +12,8 @@
#include <linux/compat.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/file.h>
-#include <linux/signal.h>
-#include <linux/resource.h>
-#include <linux/times.h>
-#include <linux/time.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/shm.h>
-#include <linux/slab.h>
-#include <linux/uio.h>
-#include <linux/ncp_fs.h>
-#include <linux/poll.h>
-#include <linux/personality.h>
-#include <linux/stat.h>
-#include <linux/highmem.h>
-#include <linux/highuid.h>
-#include <linux/mman.h>
-#include <linux/binfmts.h>
-#include <linux/namei.h>
-#include <linux/vfs.h>
-#include <linux/ptrace.h>
-#include <linux/swap.h>
#include <linux/syscalls.h>
-#include <asm/types.h>
-#include <asm/uaccess.h>
-#include <asm/mmu_context.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x) printk x
-#else
-#define DBG(x)
-#endif
asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23,
int r22, int r21, int r20)
@@ -57,3 +22,12 @@
current->comm, current->pid, r20);
return -ENOSYS;
}
+
+asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags,
+ compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd,
+ const char __user * pathname)
+{
+ return sys_fanotify_mark(fanotify_fd, flags,
+ ((__u64)mask1 << 32) | mask0,
+ dfd, pathname);
+}
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index c5fa7a6..84c5d3a 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -418,7 +418,7 @@
ENTRY_SAME(accept4) /* 320 */
ENTRY_SAME(prlimit64)
ENTRY_SAME(fanotify_init)
- ENTRY_COMP(fanotify_mark)
+ ENTRY_DIFF(fanotify_mark)
ENTRY_COMP(clock_adjtime)
ENTRY_SAME(name_to_handle_at) /* 325 */
ENTRY_COMP(open_by_handle_at)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bd6dd6e..fefe7c8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -414,7 +414,7 @@
config CRASH_DUMP
bool "Build a kdump crash kernel"
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
- select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
+ select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
@@ -1017,6 +1017,7 @@
if PPC64
config RELOCATABLE
bool "Build a relocatable kernel"
+ depends on !COMPILE_TEST
select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running anywhere
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index f8d1d6d..e61f24e 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -19,8 +19,7 @@
#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004)
#define MMU_FTR_TYPE_44x ASM_CONST(0x00000008)
#define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010)
-#define MMU_FTR_TYPE_3E ASM_CONST(0x00000020)
-#define MMU_FTR_TYPE_47x ASM_CONST(0x00000040)
+#define MMU_FTR_TYPE_47x ASM_CONST(0x00000020)
/*
* This is individual features
@@ -106,13 +105,6 @@
MMU_FTR_CI_LARGE_PAGE
#define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B
-#define MMU_FTRS_A2 MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \
- MMU_FTR_USE_TLBIVAX_BCAST | \
- MMU_FTR_LOCK_BCAST_INVAL | \
- MMU_FTR_USE_TLBRSRV | \
- MMU_FTR_USE_PAIRED_MAS | \
- MMU_FTR_TLBIEL | \
- MMU_FTR_16M_PAGE
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 9ed73714..b3e9360 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -61,8 +61,7 @@
#define PPMU_SIAR_VALID 0x00000010 /* Processor has SIAR Valid bit */
#define PPMU_HAS_SSLOT 0x00000020 /* Has sampled slot in MMCRA */
#define PPMU_HAS_SIER 0x00000040 /* Has SIER */
-#define PPMU_BHRB 0x00000080 /* has BHRB feature enabled */
-#define PPMU_EBB 0x00000100 /* supports event based branch */
+#define PPMU_ARCH_207S 0x00000080 /* PMC is architecture v2.07S */
/*
* Values for flags to get_alternatives()
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 2480256..5cf3d36 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -131,7 +131,7 @@
_GLOBAL(power7_sleep)
li r3,1
- li r4,0
+ li r4,1
b power7_powersave_common
/* No return */
diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S
index 8c86422..731be74 100644
--- a/arch/powerpc/kvm/book3s_hv_interrupts.S
+++ b/arch/powerpc/kvm/book3s_hv_interrupts.S
@@ -127,11 +127,6 @@
stw r10, HSTATE_PMC + 24(r13)
stw r11, HSTATE_PMC + 28(r13)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
-BEGIN_FTR_SECTION
- mfspr r9, SPRN_SIER
- std r8, HSTATE_MMCR + 40(r13)
- std r9, HSTATE_MMCR + 48(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
31:
/*
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index af3d78e..928ebe7 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -410,17 +410,7 @@
} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
first_context = 1;
last_context = 65535;
- } else
-#ifdef CONFIG_PPC_BOOK3E_MMU
- if (mmu_has_feature(MMU_FTR_TYPE_3E)) {
- u32 mmucfg = mfspr(SPRN_MMUCFG);
- u32 pid_bits = (mmucfg & MMUCFG_PIDSIZE_MASK)
- >> MMUCFG_PIDSIZE_SHIFT;
- first_context = 1;
- last_context = (1UL << (pid_bits + 1)) - 1;
- } else
-#endif
- {
+ } else {
first_context = 1;
last_context = 255;
}
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 4520c93..6b0641c 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -485,7 +485,7 @@
* check that the PMU supports EBB, meaning those that don't can still
* use bit 63 of the event code for something else if they wish.
*/
- return (ppmu->flags & PPMU_EBB) &&
+ return (ppmu->flags & PPMU_ARCH_207S) &&
((event->attr.config >> PERF_EVENT_CONFIG_EBB_SHIFT) & 1);
}
@@ -777,7 +777,7 @@
if (ppmu->flags & PPMU_HAS_SIER)
sier = mfspr(SPRN_SIER);
- if (ppmu->flags & PPMU_EBB) {
+ if (ppmu->flags & PPMU_ARCH_207S) {
pr_info("MMCR2: %016lx EBBHR: %016lx\n",
mfspr(SPRN_MMCR2), mfspr(SPRN_EBBHR));
pr_info("EBBRR: %016lx BESCR: %016lx\n",
@@ -996,7 +996,22 @@
} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
local64_add(delta, &event->count);
- local64_sub(delta, &event->hw.period_left);
+
+ /*
+ * A number of places program the PMC with (0x80000000 - period_left).
+ * We never want period_left to be less than 1 because we will program
+ * the PMC with a value >= 0x800000000 and an edge detected PMC will
+ * roll around to 0 before taking an exception. We have seen this
+ * on POWER8.
+ *
+ * To fix this, clamp the minimum value of period_left to 1.
+ */
+ do {
+ prev = local64_read(&event->hw.period_left);
+ val = prev - delta;
+ if (val < 1)
+ val = 1;
+ } while (local64_cmpxchg(&event->hw.period_left, prev, val) != prev);
}
/*
@@ -1300,6 +1315,9 @@
write_mmcr0(cpuhw, mmcr0);
+ if (ppmu->flags & PPMU_ARCH_207S)
+ mtspr(SPRN_MMCR2, 0);
+
/*
* Enable instruction sampling if necessary
*/
@@ -1696,7 +1714,7 @@
if (has_branch_stack(event)) {
/* PMU has BHRB enabled */
- if (!(ppmu->flags & PPMU_BHRB))
+ if (!(ppmu->flags & PPMU_ARCH_207S))
return -EOPNOTSUPP;
}
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index fe2763b..639cd91 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -792,7 +792,7 @@
.get_constraint = power8_get_constraint,
.get_alternatives = power8_get_alternatives,
.disable_pmc = power8_disable_pmc,
- .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB,
+ .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_ARCH_207S,
.n_generic = ARRAY_SIZE(power8_generic_events),
.generic_events = power8_generic_events,
.cache_events = &power8_cache_events,
diff --git a/arch/powerpc/platforms/cell/spu_syscalls.c b/arch/powerpc/platforms/cell/spu_syscalls.c
index 38e0a1a..5e6e0ba 100644
--- a/arch/powerpc/platforms/cell/spu_syscalls.c
+++ b/arch/powerpc/platforms/cell/spu_syscalls.c
@@ -111,6 +111,7 @@
return ret;
}
+#ifdef CONFIG_COREDUMP
int elf_coredump_extra_notes_size(void)
{
struct spufs_calls *calls;
@@ -142,6 +143,7 @@
return ret;
}
+#endif
void notify_spus_active(void)
{
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile
index b9d5d67..52a7d25 100644
--- a/arch/powerpc/platforms/cell/spufs/Makefile
+++ b/arch/powerpc/platforms/cell/spufs/Makefile
@@ -1,8 +1,9 @@
obj-$(CONFIG_SPU_FS) += spufs.o
-spufs-y += inode.o file.o context.o syscalls.o coredump.o
+spufs-y += inode.o file.o context.o syscalls.o
spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o
spufs-y += switch.o fault.o lscsa_alloc.o
+spufs-$(CONFIG_COREDUMP) += coredump.o
# magic for the trace events
CFLAGS_sched.o := -I$(src)
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index b045fdd..a87200a 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -79,8 +79,10 @@
struct spufs_calls spufs_calls = {
.create_thread = do_spu_create,
.spu_run = do_spu_run,
- .coredump_extra_notes_size = spufs_coredump_extra_notes_size,
- .coredump_extra_notes_write = spufs_coredump_extra_notes_write,
.notify_spus_active = do_notify_spus_active,
.owner = THIS_MODULE,
+#ifdef CONFIG_COREDUMP
+ .coredump_extra_notes_size = spufs_coredump_extra_notes_size,
+ .coredump_extra_notes_write = spufs_coredump_extra_notes_write,
+#endif
};
diff --git a/arch/x86/crypto/sha512_ssse3_glue.c b/arch/x86/crypto/sha512_ssse3_glue.c
index f30cd10..8626b03 100644
--- a/arch/x86/crypto/sha512_ssse3_glue.c
+++ b/arch/x86/crypto/sha512_ssse3_glue.c
@@ -141,7 +141,7 @@
/* save number of bits */
bits[1] = cpu_to_be64(sctx->count[0] << 3);
- bits[0] = cpu_to_be64(sctx->count[1] << 3) | sctx->count[0] >> 61;
+ bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61);
/* Pad out to 112 mod 128 and append length */
index = sctx->count[0] & 0x7f;
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index df95a2f..11b65d4 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -93,6 +93,9 @@
uint64_t flags = GET_LE(&in->sh_flags);
bool copy = flags & SHF_ALLOC &&
+ (GET_LE(&in->sh_size) ||
+ (GET_LE(&in->sh_type) != SHT_RELA &&
+ GET_LE(&in->sh_type) != SHT_REL)) &&
strcmp(name, ".altinstructions") &&
strcmp(name, ".altinstr_replacement");
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index e1513c4..5a5176d 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -62,6 +62,9 @@
Only used for the 64-bit and x32 vdsos. */
static unsigned long vdso_addr(unsigned long start, unsigned len)
{
+#ifdef CONFIG_X86_32
+ return 0;
+#else
unsigned long addr, end;
unsigned offset;
end = (start + PMD_SIZE - 1) & PMD_MASK;
@@ -83,6 +86,7 @@
addr = align_vdso_addr(addr);
return addr;
+#endif
}
static int map_vdso(const struct vdso_image *image, bool calculate_addr)
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index c67f6f5..36b0e61 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -30,6 +30,10 @@
#include <linux/types.h>
#include <linux/dmi.h>
#include <linux/delay.h>
+#ifdef CONFIG_ACPI_PROCFS_POWER
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#endif
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/acpi.h>
@@ -52,6 +56,7 @@
MODULE_DESCRIPTION("ACPI AC Adapter Driver");
MODULE_LICENSE("GPL");
+
static int acpi_ac_add(struct acpi_device *device);
static int acpi_ac_remove(struct acpi_device *device);
static void acpi_ac_notify(struct acpi_device *device, u32 event);
@@ -67,6 +72,13 @@
#endif
static SIMPLE_DEV_PM_OPS(acpi_ac_pm, NULL, acpi_ac_resume);
+#ifdef CONFIG_ACPI_PROCFS_POWER
+extern struct proc_dir_entry *acpi_lock_ac_dir(void);
+extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
+static int acpi_ac_open_fs(struct inode *inode, struct file *file);
+#endif
+
+
static int ac_sleep_before_get_state_ms;
static struct acpi_driver acpi_ac_driver = {
@@ -91,6 +103,16 @@
#define to_acpi_ac(x) container_of(x, struct acpi_ac, charger)
+#ifdef CONFIG_ACPI_PROCFS_POWER
+static const struct file_operations acpi_ac_fops = {
+ .owner = THIS_MODULE,
+ .open = acpi_ac_open_fs,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
@@ -143,6 +165,83 @@
POWER_SUPPLY_PROP_ONLINE,
};
+#ifdef CONFIG_ACPI_PROCFS_POWER
+/* --------------------------------------------------------------------------
+ FS Interface (/proc)
+ -------------------------------------------------------------------------- */
+
+static struct proc_dir_entry *acpi_ac_dir;
+
+static int acpi_ac_seq_show(struct seq_file *seq, void *offset)
+{
+ struct acpi_ac *ac = seq->private;
+
+
+ if (!ac)
+ return 0;
+
+ if (acpi_ac_get_state(ac)) {
+ seq_puts(seq, "ERROR: Unable to read AC Adapter state\n");
+ return 0;
+ }
+
+ seq_puts(seq, "state: ");
+ switch (ac->state) {
+ case ACPI_AC_STATUS_OFFLINE:
+ seq_puts(seq, "off-line\n");
+ break;
+ case ACPI_AC_STATUS_ONLINE:
+ seq_puts(seq, "on-line\n");
+ break;
+ default:
+ seq_puts(seq, "unknown\n");
+ break;
+ }
+
+ return 0;
+}
+
+static int acpi_ac_open_fs(struct inode *inode, struct file *file)
+{
+ return single_open(file, acpi_ac_seq_show, PDE_DATA(inode));
+}
+
+static int acpi_ac_add_fs(struct acpi_ac *ac)
+{
+ struct proc_dir_entry *entry = NULL;
+
+ printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded,"
+ " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n");
+ if (!acpi_device_dir(ac->device)) {
+ acpi_device_dir(ac->device) =
+ proc_mkdir(acpi_device_bid(ac->device), acpi_ac_dir);
+ if (!acpi_device_dir(ac->device))
+ return -ENODEV;
+ }
+
+ /* 'state' [R] */
+ entry = proc_create_data(ACPI_AC_FILE_STATE,
+ S_IRUGO, acpi_device_dir(ac->device),
+ &acpi_ac_fops, ac);
+ if (!entry)
+ return -ENODEV;
+ return 0;
+}
+
+static int acpi_ac_remove_fs(struct acpi_ac *ac)
+{
+
+ if (acpi_device_dir(ac->device)) {
+ remove_proc_entry(ACPI_AC_FILE_STATE,
+ acpi_device_dir(ac->device));
+ remove_proc_entry(acpi_device_bid(ac->device), acpi_ac_dir);
+ acpi_device_dir(ac->device) = NULL;
+ }
+
+ return 0;
+}
+#endif
+
/* --------------------------------------------------------------------------
Driver Model
-------------------------------------------------------------------------- */
@@ -243,6 +342,11 @@
goto end;
ac->charger.name = acpi_device_bid(device);
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ result = acpi_ac_add_fs(ac);
+ if (result)
+ goto end;
+#endif
ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
@@ -258,8 +362,12 @@
ac->battery_nb.notifier_call = acpi_ac_battery_notify;
register_acpi_notifier(&ac->battery_nb);
end:
- if (result)
+ if (result) {
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ acpi_ac_remove_fs(ac);
+#endif
kfree(ac);
+ }
dmi_check_system(ac_dmi_table);
return result;
@@ -303,6 +411,10 @@
power_supply_unregister(&ac->charger);
unregister_acpi_notifier(&ac->battery_nb);
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ acpi_ac_remove_fs(ac);
+#endif
+
kfree(ac);
return 0;
@@ -315,9 +427,20 @@
if (acpi_disabled)
return -ENODEV;
- result = acpi_bus_register_driver(&acpi_ac_driver);
- if (result < 0)
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ acpi_ac_dir = acpi_lock_ac_dir();
+ if (!acpi_ac_dir)
return -ENODEV;
+#endif
+
+
+ result = acpi_bus_register_driver(&acpi_ac_driver);
+ if (result < 0) {
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ acpi_unlock_ac_dir(acpi_ac_dir);
+#endif
+ return -ENODEV;
+ }
return 0;
}
@@ -325,6 +448,9 @@
static void __exit acpi_ac_exit(void)
{
acpi_bus_unregister_driver(&acpi_ac_driver);
+#ifdef CONFIG_ACPI_PROCFS_POWER
+ acpi_unlock_ac_dir(acpi_ac_dir);
+#endif
}
module_init(acpi_ac_init);
module_exit(acpi_ac_exit);
diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c
index 6703c1f..4ddb0dc 100644
--- a/drivers/acpi/acpi_pnp.c
+++ b/drivers/acpi/acpi_pnp.c
@@ -14,6 +14,8 @@
#include <linux/module.h>
static const struct acpi_device_id acpi_pnp_device_ids[] = {
+ /* soc_button_array */
+ {"PNP0C40"},
/* pata_isapnp */
{"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */
/* floppy */
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 0d7116f..130f513 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/suspend.h>
+#include <linux/delay.h>
#include <asm/unaligned.h>
#ifdef CONFIG_ACPI_PROCFS_POWER
@@ -534,6 +535,20 @@
" invalid.\n");
}
+ /*
+ * When fully charged, some batteries wrongly report
+ * capacity_now = design_capacity instead of = full_charge_capacity
+ */
+ if (battery->capacity_now > battery->full_charge_capacity
+ && battery->full_charge_capacity != ACPI_BATTERY_VALUE_UNKNOWN) {
+ battery->capacity_now = battery->full_charge_capacity;
+ if (battery->capacity_now != battery->design_capacity)
+ printk_once(KERN_WARNING FW_BUG
+ "battery: reported current charge level (%d) "
+ "is higher than reported maximum charge level (%d).\n",
+ battery->capacity_now, battery->full_charge_capacity);
+ }
+
if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
&& battery->capacity_now >= 0 && battery->capacity_now <= 100)
battery->capacity_now = (battery->capacity_now *
@@ -1151,6 +1166,28 @@
{},
};
+/*
+ * Some machines'(E,G Lenovo Z480) ECs are not stable
+ * during boot up and this causes battery driver fails to be
+ * probed due to failure of getting battery information
+ * from EC sometimes. After several retries, the operation
+ * may work. So add retry code here and 20ms sleep between
+ * every retries.
+ */
+static int acpi_battery_update_retry(struct acpi_battery *battery)
+{
+ int retry, ret;
+
+ for (retry = 5; retry; retry--) {
+ ret = acpi_battery_update(battery, false);
+ if (!ret)
+ break;
+
+ msleep(20);
+ }
+ return ret;
+}
+
static int acpi_battery_add(struct acpi_device *device)
{
int result = 0;
@@ -1169,9 +1206,11 @@
mutex_init(&battery->sysfs_lock);
if (acpi_has_method(battery->device->handle, "_BIX"))
set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags);
- result = acpi_battery_update(battery, false);
+
+ result = acpi_battery_update_retry(battery);
if (result)
goto fail;
+
#ifdef CONFIG_ACPI_PROCFS_POWER
result = acpi_battery_add_fs(device);
#endif
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index ad11ba4..a66ab65 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1,11 +1,14 @@
/*
- * ec.c - ACPI Embedded Controller Driver (v2.1)
+ * ec.c - ACPI Embedded Controller Driver (v2.2)
*
- * Copyright (C) 2006-2008 Alexey Starikovskiy <astarikovskiy@suse.de>
- * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
- * Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
- * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
- * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2001-2014 Intel Corporation
+ * Author: 2014 Lv Zheng <lv.zheng@intel.com>
+ * 2006, 2007 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
+ * 2006 Denis Sadykov <denis.m.sadykov@intel.com>
+ * 2004 Luming Yu <luming.yu@intel.com>
+ * 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ * 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -52,6 +55,7 @@
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
+#define ACPI_EC_FLAG_CMD 0x08 /* Input buffer contains a command */
#define ACPI_EC_FLAG_BURST 0x10 /* burst mode */
#define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */
@@ -78,6 +82,9 @@
EC_FLAGS_BLOCKED, /* Transactions are blocked */
};
+#define ACPI_EC_COMMAND_POLL 0x01 /* Available for command byte */
+#define ACPI_EC_COMMAND_COMPLETE 0x02 /* Completed last byte */
+
/* ec.c is compiled in acpi namespace so this shows up as acpi.ec_delay param */
static unsigned int ec_delay __read_mostly = ACPI_EC_DELAY;
module_param(ec_delay, uint, 0644);
@@ -109,7 +116,7 @@
u8 ri;
u8 wlen;
u8 rlen;
- bool done;
+ u8 flags;
};
struct acpi_ec *boot_ec, *first_ec;
@@ -127,83 +134,104 @@
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
u8 x = inb(ec->command_addr);
- pr_debug("---> status = 0x%2.2x\n", x);
+ pr_debug("EC_SC(R) = 0x%2.2x "
+ "SCI_EVT=%d BURST=%d CMD=%d IBF=%d OBF=%d\n",
+ x,
+ !!(x & ACPI_EC_FLAG_SCI),
+ !!(x & ACPI_EC_FLAG_BURST),
+ !!(x & ACPI_EC_FLAG_CMD),
+ !!(x & ACPI_EC_FLAG_IBF),
+ !!(x & ACPI_EC_FLAG_OBF));
return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
u8 x = inb(ec->data_addr);
- pr_debug("---> data = 0x%2.2x\n", x);
+ pr_debug("EC_DATA(R) = 0x%2.2x\n", x);
return x;
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
- pr_debug("<--- command = 0x%2.2x\n", command);
+ pr_debug("EC_SC(W) = 0x%2.2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
- pr_debug("<--- data = 0x%2.2x\n", data);
+ pr_debug("EC_DATA(W) = 0x%2.2x\n", data);
outb(data, ec->data_addr);
}
-static int ec_transaction_done(struct acpi_ec *ec)
+static int ec_transaction_completed(struct acpi_ec *ec)
{
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&ec->lock, flags);
- if (!ec->curr || ec->curr->done)
+ if (ec->curr && (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE))
ret = 1;
spin_unlock_irqrestore(&ec->lock, flags);
return ret;
}
-static void start_transaction(struct acpi_ec *ec)
+static bool advance_transaction(struct acpi_ec *ec)
{
- ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
- ec->curr->done = false;
- acpi_ec_write_cmd(ec, ec->curr->command);
-}
-
-static void advance_transaction(struct acpi_ec *ec, u8 status)
-{
- unsigned long flags;
struct transaction *t;
+ u8 status;
+ bool wakeup = false;
- spin_lock_irqsave(&ec->lock, flags);
+ pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK");
+ status = acpi_ec_read_status(ec);
t = ec->curr;
if (!t)
- goto unlock;
- if (t->wlen > t->wi) {
- if ((status & ACPI_EC_FLAG_IBF) == 0)
- acpi_ec_write_data(ec,
- t->wdata[t->wi++]);
- else
- goto err;
- } else if (t->rlen > t->ri) {
- if ((status & ACPI_EC_FLAG_OBF) == 1) {
- t->rdata[t->ri++] = acpi_ec_read_data(ec);
- if (t->rlen == t->ri)
- t->done = true;
+ goto err;
+ if (t->flags & ACPI_EC_COMMAND_POLL) {
+ if (t->wlen > t->wi) {
+ if ((status & ACPI_EC_FLAG_IBF) == 0)
+ acpi_ec_write_data(ec, t->wdata[t->wi++]);
+ else
+ goto err;
+ } else if (t->rlen > t->ri) {
+ if ((status & ACPI_EC_FLAG_OBF) == 1) {
+ t->rdata[t->ri++] = acpi_ec_read_data(ec);
+ if (t->rlen == t->ri) {
+ t->flags |= ACPI_EC_COMMAND_COMPLETE;
+ wakeup = true;
+ }
+ } else
+ goto err;
+ } else if (t->wlen == t->wi &&
+ (status & ACPI_EC_FLAG_IBF) == 0) {
+ t->flags |= ACPI_EC_COMMAND_COMPLETE;
+ wakeup = true;
+ }
+ return wakeup;
+ } else {
+ if ((status & ACPI_EC_FLAG_IBF) == 0) {
+ acpi_ec_write_cmd(ec, t->command);
+ t->flags |= ACPI_EC_COMMAND_POLL;
} else
goto err;
- } else if (t->wlen == t->wi &&
- (status & ACPI_EC_FLAG_IBF) == 0)
- t->done = true;
- goto unlock;
+ return wakeup;
+ }
err:
/*
* If SCI bit is set, then don't think it's a false IRQ
* otherwise will take a not handled IRQ as a false one.
*/
- if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI))
- ++t->irq_count;
+ if (!(status & ACPI_EC_FLAG_SCI)) {
+ if (in_interrupt() && t)
+ ++t->irq_count;
+ }
+ return wakeup;
+}
-unlock:
- spin_unlock_irqrestore(&ec->lock, flags);
+static void start_transaction(struct acpi_ec *ec)
+{
+ ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0;
+ ec->curr->flags = 0;
+ (void)advance_transaction(ec);
}
static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data);
@@ -228,15 +256,17 @@
/* don't sleep with disabled interrupts */
if (EC_FLAGS_MSI || irqs_disabled()) {
udelay(ACPI_EC_MSI_UDELAY);
- if (ec_transaction_done(ec))
+ if (ec_transaction_completed(ec))
return 0;
} else {
if (wait_event_timeout(ec->wait,
- ec_transaction_done(ec),
+ ec_transaction_completed(ec),
msecs_to_jiffies(1)))
return 0;
}
- advance_transaction(ec, acpi_ec_read_status(ec));
+ spin_lock_irqsave(&ec->lock, flags);
+ (void)advance_transaction(ec);
+ spin_unlock_irqrestore(&ec->lock, flags);
} while (time_before(jiffies, delay));
pr_debug("controller reset, restart transaction\n");
spin_lock_irqsave(&ec->lock, flags);
@@ -268,23 +298,6 @@
return ret;
}
-static int ec_check_ibf0(struct acpi_ec *ec)
-{
- u8 status = acpi_ec_read_status(ec);
- return (status & ACPI_EC_FLAG_IBF) == 0;
-}
-
-static int ec_wait_ibf0(struct acpi_ec *ec)
-{
- unsigned long delay = jiffies + msecs_to_jiffies(ec_delay);
- /* interrupt wait manually if GPE mode is not active */
- while (time_before(jiffies, delay))
- if (wait_event_timeout(ec->wait, ec_check_ibf0(ec),
- msecs_to_jiffies(1)))
- return 0;
- return -ETIME;
-}
-
static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
{
int status;
@@ -305,12 +318,6 @@
goto unlock;
}
}
- if (ec_wait_ibf0(ec)) {
- pr_err("input buffer is not empty, "
- "aborting transaction\n");
- status = -ETIME;
- goto end;
- }
pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n",
t->command, t->wdata ? t->wdata[0] : 0);
/* disable GPE during transaction if storm is detected */
@@ -334,7 +341,6 @@
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
pr_debug("transaction end\n");
-end:
if (ec->global_lock)
acpi_release_global_lock(glk);
unlock:
@@ -634,17 +640,14 @@
static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
u32 gpe_number, void *data)
{
+ unsigned long flags;
struct acpi_ec *ec = data;
- u8 status = acpi_ec_read_status(ec);
- pr_debug("~~~> interrupt, status:0x%02x\n", status);
-
- advance_transaction(ec, status);
- if (ec_transaction_done(ec) &&
- (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
+ spin_lock_irqsave(&ec->lock, flags);
+ if (advance_transaction(ec))
wake_up(&ec->wait);
- ec_check_sci(ec, acpi_ec_read_status(ec));
- }
+ spin_unlock_irqrestore(&ec->lock, flags);
+ ec_check_sci(ec, acpi_ec_read_status(ec));
return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE;
}
@@ -1066,8 +1069,10 @@
/* fall through */
}
- if (EC_FLAGS_SKIP_DSDT_SCAN)
+ if (EC_FLAGS_SKIP_DSDT_SCAN) {
+ kfree(saved_ec);
return -ENODEV;
+ }
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
@@ -1105,6 +1110,7 @@
}
error:
kfree(boot_ec);
+ kfree(saved_ec);
boot_ec = NULL;
return -ENODEV;
}
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 0bdacc5..2ba8f02 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -77,7 +77,7 @@
switch (ares->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
memory24 = &ares->data.memory24;
- if (!memory24->address_length)
+ if (!memory24->minimum && !memory24->address_length)
return false;
acpi_dev_get_memresource(res, memory24->minimum,
memory24->address_length,
@@ -85,7 +85,7 @@
break;
case ACPI_RESOURCE_TYPE_MEMORY32:
memory32 = &ares->data.memory32;
- if (!memory32->address_length)
+ if (!memory32->minimum && !memory32->address_length)
return false;
acpi_dev_get_memresource(res, memory32->minimum,
memory32->address_length,
@@ -93,7 +93,7 @@
break;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
fixed_memory32 = &ares->data.fixed_memory32;
- if (!fixed_memory32->address_length)
+ if (!fixed_memory32->address && !fixed_memory32->address_length)
return false;
acpi_dev_get_memresource(res, fixed_memory32->address,
fixed_memory32->address_length,
@@ -150,7 +150,7 @@
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IO:
io = &ares->data.io;
- if (!io->address_length)
+ if (!io->minimum && !io->address_length)
return false;
acpi_dev_get_ioresource(res, io->minimum,
io->address_length,
@@ -158,7 +158,7 @@
break;
case ACPI_RESOURCE_TYPE_FIXED_IO:
fixed_io = &ares->data.fixed_io;
- if (!fixed_io->address_length)
+ if (!fixed_io->address && !fixed_io->address_length)
return false;
acpi_dev_get_ioresource(res, fixed_io->address,
fixed_io->address_length,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index fb9ffe9..071c1df 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -241,13 +241,14 @@
return use_native_backlight_dmi;
}
-static bool acpi_video_verify_backlight_support(void)
+bool acpi_video_verify_backlight_support(void)
{
if (acpi_osi_is_win8() && acpi_video_use_native_backlight() &&
backlight_device_registered(BACKLIGHT_RAW))
return false;
return acpi_video_backlight_support();
}
+EXPORT_SYMBOL_GPL(acpi_video_verify_backlight_support);
/* backlight device sysfs support */
static int acpi_video_get_brightness(struct backlight_device *bd)
@@ -563,6 +564,14 @@
},
},
{
+ .callback = video_set_use_native_backlight,
+ .ident = "Acer TravelMate B113",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate B113"),
+ },
+ },
+ {
.callback = video_set_use_native_backlight,
.ident = "HP ProBook 4340s",
.matches = {
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 33e3db5..c42feb2 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -166,6 +166,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
},
},
+ {
+ .callback = video_detect_force_vendor,
+ .ident = "Dell Inspiron 5737",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"),
+ },
+ },
{ },
};
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 05882e4..5513296 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -371,7 +371,9 @@
int pmp, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
+unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
int ahci_stop_engine(struct ata_port *ap);
+void ahci_start_fis_rx(struct ata_port *ap);
void ahci_start_engine(struct ata_port *ap);
int ahci_check_ready(struct ata_link *link);
int ahci_kick_engine(struct ata_port *ap);
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 3a90152..cac4360 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -58,6 +58,8 @@
struct imx_ahci_priv {
struct platform_device *ahci_pdev;
enum ahci_imx_type type;
+ struct clk *sata_clk;
+ struct clk *sata_ref_clk;
struct clk *ahb_clk;
struct regmap *gpr;
bool no_device;
@@ -224,7 +226,7 @@
return ret;
}
- ret = ahci_platform_enable_clks(hpriv);
+ ret = clk_prepare_enable(imxpriv->sata_ref_clk);
if (ret < 0)
goto disable_regulator;
@@ -291,7 +293,7 @@
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
}
- ahci_platform_disable_clks(hpriv);
+ clk_disable_unprepare(imxpriv->sata_ref_clk);
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
@@ -324,6 +326,9 @@
writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR);
imx_sata_disable(hpriv);
imxpriv->no_device = true;
+
+ dev_info(ap->dev, "no device found, disabling link.\n");
+ dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n");
}
static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
@@ -385,6 +390,19 @@
imxpriv->no_device = false;
imxpriv->first_time = true;
imxpriv->type = (enum ahci_imx_type)of_id->data;
+
+ imxpriv->sata_clk = devm_clk_get(dev, "sata");
+ if (IS_ERR(imxpriv->sata_clk)) {
+ dev_err(dev, "can't get sata clock.\n");
+ return PTR_ERR(imxpriv->sata_clk);
+ }
+
+ imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
+ if (IS_ERR(imxpriv->sata_ref_clk)) {
+ dev_err(dev, "can't get sata_ref clock.\n");
+ return PTR_ERR(imxpriv->sata_ref_clk);
+ }
+
imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
if (IS_ERR(imxpriv->ahb_clk)) {
dev_err(dev, "can't get ahb clock.\n");
@@ -407,10 +425,14 @@
hpriv->plat_data = imxpriv;
- ret = imx_sata_enable(hpriv);
+ ret = clk_prepare_enable(imxpriv->sata_clk);
if (ret)
return ret;
+ ret = imx_sata_enable(hpriv);
+ if (ret)
+ goto disable_clk;
+
/*
* Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
* and IP vendor specific register IMX_TIMER1MS.
@@ -435,16 +457,24 @@
ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info,
0, 0, 0);
if (ret)
- imx_sata_disable(hpriv);
+ goto disable_sata;
+ return 0;
+
+disable_sata:
+ imx_sata_disable(hpriv);
+disable_clk:
+ clk_disable_unprepare(imxpriv->sata_clk);
return ret;
}
static void ahci_imx_host_stop(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
+ struct imx_ahci_priv *imxpriv = hpriv->plat_data;
imx_sata_disable(hpriv);
+ clk_disable_unprepare(imxpriv->sata_clk);
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index ebe505c..b10d81d 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -58,7 +58,7 @@
}
if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
- hflags |= AHCI_HFLAG_NO_FBS;
+ hflags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
hflags, 0, 0);
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 042a9bb..ee3a365 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -78,6 +78,7 @@
struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
+ u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/
void __iomem *csr_core; /* Core CSR address of IP */
void __iomem *csr_diag; /* Diag CSR address of IP */
void __iomem *csr_axi; /* AXI CSR address of IP */
@@ -98,20 +99,62 @@
}
/**
+ * xgene_ahci_restart_engine - Restart the dma engine.
+ * @ap : ATA port of interest
+ *
+ * Restarts the dma engine inside the controller.
+ */
+static int xgene_ahci_restart_engine(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ ahci_stop_engine(ap);
+ ahci_start_fis_rx(ap);
+ hpriv->start_engine(ap);
+
+ return 0;
+}
+
+/**
+ * xgene_ahci_qc_issue - Issue commands to the device
+ * @qc: Command to issue
+ *
+ * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
+ * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
+ * state machine goes into the CMFatalErrorUpdate state and locks up. By
+ * restarting the dma engine, it removes the controller out of lock up state.
+ */
+static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct xgene_ahci_context *ctx = hpriv->plat_data;
+ int rc = 0;
+
+ if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
+ xgene_ahci_restart_engine(ap);
+
+ rc = ahci_qc_issue(qc);
+
+ /* Save the last command issued */
+ ctx->last_cmd[ap->port_no] = qc->tf.command;
+
+ return rc;
+}
+
+/**
* xgene_ahci_read_id - Read ID data from the specified device
* @dev: device
* @tf: proposed taskfile
* @id: data buffer
*
* This custom read ID function is required due to the fact that the HW
- * does not support DEVSLP and the controller state machine may get stuck
- * after processing the ID query command.
+ * does not support DEVSLP.
*/
static unsigned int xgene_ahci_read_id(struct ata_device *dev,
struct ata_taskfile *tf, u16 *id)
{
u32 err_mask;
- void __iomem *port_mmio = ahci_port_base(dev->link->ap);
err_mask = ata_do_dev_read_id(dev, tf, id);
if (err_mask)
@@ -133,16 +176,6 @@
*/
id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
- /*
- * Due to HW errata, restart the port if no other command active.
- * Otherwise the controller may get stuck.
- */
- if (!readl(port_mmio + PORT_CMD_ISSUE)) {
- writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* Force a barrier */
- writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* Force a barrier */
- }
return 0;
}
@@ -300,6 +333,7 @@
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
.read_id = xgene_ahci_read_id,
+ .qc_issue = xgene_ahci_qc_issue,
};
static const struct ata_port_info xgene_ahci_port_info = {
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 40ea583..d72ce04 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -68,7 +68,6 @@
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
-static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
@@ -620,7 +619,7 @@
}
EXPORT_SYMBOL_GPL(ahci_stop_engine);
-static void ahci_start_fis_rx(struct ata_port *ap)
+void ahci_start_fis_rx(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -646,6 +645,7 @@
/* flush */
readl(port_mmio + PORT_CMD);
}
+EXPORT_SYMBOL_GPL(ahci_start_fis_rx);
static int ahci_stop_fis_rx(struct ata_port *ap)
{
@@ -1945,7 +1945,7 @@
}
EXPORT_SYMBOL_GPL(ahci_interrupt);
-static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
+unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *port_mmio = ahci_port_base(ap);
@@ -1974,6 +1974,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(ahci_qc_issue);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
{
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 3a5b4ed..b007758 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -250,8 +250,13 @@
if (IS_ERR(hpriv->phy)) {
rc = PTR_ERR(hpriv->phy);
switch (rc) {
- case -ENODEV:
case -ENOSYS:
+ /* No PHY support. Check if PHY is required. */
+ if (of_find_property(dev->of_node, "phys", NULL)) {
+ dev_err(dev, "couldn't get sata-phy: ENOSYS\n");
+ goto err_out;
+ }
+ case -ENODEV:
/* continue normally */
hpriv->phy = NULL;
break;
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index d915707..93dcad0 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -138,7 +138,9 @@
if (!alloc_cpumask_var(&old_mask, GFP_KERNEL))
return -ENOMEM;
cpumask_copy(old_mask, ¤t->cpus_allowed);
- set_cpus_allowed_ptr(current, cpumask_of(0));
+ rc = set_cpus_allowed_ptr(current, cpumask_of(0));
+ if (rc)
+ goto out;
if (smp_processor_id() != 0) {
rc = -EBUSY;
goto out;
diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index 9b7b585..3757e9e 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -230,16 +230,13 @@
goto err_reg;
}
- s2mps11_clk->lookup = devm_kzalloc(&pdev->dev,
- sizeof(struct clk_lookup), GFP_KERNEL);
+ s2mps11_clk->lookup = clkdev_alloc(s2mps11_clk->clk,
+ s2mps11_name(s2mps11_clk), NULL);
if (!s2mps11_clk->lookup) {
ret = -ENOMEM;
goto err_lup;
}
- s2mps11_clk->lookup->con_id = s2mps11_name(s2mps11_clk);
- s2mps11_clk->lookup->clk = s2mps11_clk->clk;
-
clkdev_add(s2mps11_clk->lookup);
}
diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c
index 12f3c0b..4c449b3 100644
--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
@@ -1209,7 +1209,7 @@
static u8 mmcc_pxo_hdmi_map[] = {
[P_PXO] = 0,
- [P_HDMI_PLL] = 2,
+ [P_HDMI_PLL] = 3,
};
static const char *mmcc_pxo_hdmi[] = {
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 4f150c9..7f4a473 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -925,21 +925,13 @@
GATE(CLK_RTC, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15,
0, 0),
GATE(CLK_KEYIF, "keyif", "aclk100", E4X12_GATE_IP_PERIR, 16, 0, 0),
- GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "div_pwm_isp",
- E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp_pre",
- E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp_pre",
- E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
- E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "sclk_pwm_isp",
+ GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "div_pwm_isp",
E4X12_GATE_IP_ISP, 0, 0, 0),
- GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "sclk_spi0_isp",
+ GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "div_spi0_isp_pre",
E4X12_GATE_IP_ISP, 1, 0, 0),
- GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "sclk_spi1_isp",
+ GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "div_spi1_isp_pre",
E4X12_GATE_IP_ISP, 2, 0, 0),
- GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "sclk_uart_isp",
+ GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "div_uart_isp",
E4X12_GATE_IP_ISP, 3, 0, 0),
GATE(CLK_WDT, "watchdog", "aclk100", E4X12_GATE_IP_PERIR, 14, 0, 0),
GATE(CLK_PCM0, "pcm0", "aclk100", E4X12_GATE_IP_MAUDIO, 2,
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 1fad4c5..184f642 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -661,7 +661,7 @@
GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0),
GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0),
GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub",
- GATE_IP_DISP1, 2, 0, 0),
+ GATE_IP_DISP1, 9, 0, 0),
GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub",
GATE_IP_DISP1, 8, 0, 0),
GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0),
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 9d7d7ee..a4e6cc7 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -631,7 +631,8 @@
SRC_TOP4, 16, 1),
MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1),
MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1),
- MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1),
+ MUX(CLK_MOUT_USER_ACLK333, "mout_user_aclk333", mout_user_aclk333_p,
+ SRC_TOP4, 28, 1),
MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p,
SRC_TOP5, 0, 1),
@@ -684,7 +685,8 @@
SRC_TOP11, 12, 1),
MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1),
MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1),
- MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1),
+ MUX(CLK_MOUT_SW_ACLK333, "mout_sw_aclk333", mout_sw_aclk333_p,
+ SRC_TOP11, 28, 1),
MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p,
SRC_TOP12, 4, 1),
@@ -890,8 +892,6 @@
GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
- GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
GATE_BUS_TOP, 13, 0, 0),
GATE(0, "aclk166", "mout_user_aclk166",
@@ -994,34 +994,61 @@
SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
/* PERIC Block */
- GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
- GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
- GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
- GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
- GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
- GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
- GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
- GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
- GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
- GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
- GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
- GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
- GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
- GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
- GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
- GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
- GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
- GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
- GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
- GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
- GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
- GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
- GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
- GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
- GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
- GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
+ GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 0, 0, 0),
+ GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 1, 0, 0),
+ GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 2, 0, 0),
+ GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 3, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 6, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 7, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 8, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 9, 0, 0),
+ GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 10, 0, 0),
+ GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 11, 0, 0),
+ GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 12, 0, 0),
+ GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 13, 0, 0),
+ GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 14, 0, 0),
+ GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 15, 0, 0),
+ GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 16, 0, 0),
+ GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 17, 0, 0),
+ GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 18, 0, 0),
+ GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 20, 0, 0),
+ GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 21, 0, 0),
+ GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 22, 0, 0),
+ GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 23, 0, 0),
+ GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 24, 0, 0),
+ GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 26, 0, 0),
+ GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 28, 0, 0),
+ GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 30, 0, 0),
+ GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 31, 0, 0),
- GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+ GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric",
+ GATE_BUS_PERIC, 22, 0, 0),
/* PERIS Block */
GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
index ba07168..140f473 100644
--- a/drivers/clk/samsung/clk-s3c2410.c
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -152,6 +152,11 @@
ALIAS(HCLK, NULL, "hclk"),
ALIAS(MPLL, NULL, "mpll"),
ALIAS(FCLK, NULL, "fclk"),
+ ALIAS(PCLK, NULL, "watchdog"),
+ ALIAS(PCLK_SDI, NULL, "sdi"),
+ ALIAS(HCLK_NAND, NULL, "nand"),
+ ALIAS(PCLK_I2S, NULL, "iis"),
+ ALIAS(PCLK_I2C, NULL, "i2c"),
};
/* S3C2410 specific clocks */
@@ -378,7 +383,7 @@
if (!np)
s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
- if (current_soc == 2410) {
+ if (current_soc == S3C2410) {
if (_get_rate("xti") == 12 * MHZ) {
s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
@@ -432,7 +437,7 @@
samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
ARRAY_SIZE(s3c2410_ffactor));
samsung_clk_register_alias(ctx, s3c2410_aliases,
- ARRAY_SIZE(s3c2410_common_aliases));
+ ARRAY_SIZE(s3c2410_aliases));
break;
case S3C2440:
samsung_clk_register_mux(ctx, s3c2440_muxes,
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index efa16ee..8889ff1c 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -418,8 +418,10 @@
ALIAS(SCLK_MMC2, "s3c-sdhci.2", "mmc_busclk.2"),
ALIAS(SCLK_MMC1, "s3c-sdhci.1", "mmc_busclk.2"),
ALIAS(SCLK_MMC0, "s3c-sdhci.0", "mmc_busclk.2"),
- ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi-bus"),
- ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi-bus"),
+ ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi_busclk0"),
+ ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi_busclk2"),
+ ALIAS(PCLK_SPI0, "s3c6410-spi.0", "spi_busclk0"),
+ ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi_busclk2"),
ALIAS(SCLK_AUDIO1, "samsung-pcm.1", "audio-bus"),
ALIAS(SCLK_AUDIO1, "samsung-i2s.1", "audio-bus"),
ALIAS(SCLK_AUDIO0, "samsung-pcm.0", "audio-bus"),
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index c2d2043..bb5f387 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -211,7 +211,7 @@
/* array of all spear 320 clock lookups */
#ifdef CONFIG_MACH_SPEAR320
-#define SPEAR320_CONTROL_REG (soc_config_base + 0x0000)
+#define SPEAR320_CONTROL_REG (soc_config_base + 0x0010)
#define SPEAR320_EXT_CTRL_REG (soc_config_base + 0x0018)
#define SPEAR320_UARTX_PCLK_MASK 0x1
@@ -245,7 +245,8 @@
"ras_syn0_gclk", };
static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", };
-static void __init spear320_clk_init(void __iomem *soc_config_base)
+static void __init spear320_clk_init(void __iomem *soc_config_base,
+ struct clk *ras_apb_clk)
{
struct clk *clk;
@@ -342,6 +343,8 @@
SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK,
0, &_lock);
clk_register_clkdev(clk, NULL, "a3000000.serial");
+ /* Enforce ras_apb_clk */
+ clk_set_parent(clk, ras_apb_clk);
clk = clk_register_mux(NULL, "uart2_clk", uartx_parents,
ARRAY_SIZE(uartx_parents),
@@ -349,6 +352,8 @@
SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT,
SPEAR320_UARTX_PCLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "a4000000.serial");
+ /* Enforce ras_apb_clk */
+ clk_set_parent(clk, ras_apb_clk);
clk = clk_register_mux(NULL, "uart3_clk", uartx_parents,
ARRAY_SIZE(uartx_parents),
@@ -379,12 +384,12 @@
clk_register_clkdev(clk, NULL, "60100000.serial");
}
#else
-static inline void spear320_clk_init(void __iomem *soc_config_base) { }
+static inline void spear320_clk_init(void __iomem *sb, struct clk *rc) { }
#endif
void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base)
{
- struct clk *clk, *clk1;
+ struct clk *clk, *clk1, *ras_apb_clk;
clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT,
32000);
@@ -613,6 +618,7 @@
clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB,
RAS_APB_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "ras_apb_clk", NULL);
+ ras_apb_clk = clk;
clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0,
RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock);
@@ -659,5 +665,5 @@
else if (of_machine_is_compatible("st,spear310"))
spear310_clk_init();
else if (of_machine_is_compatible("st,spear320"))
- spear320_clk_init(soc_config_base);
+ spear320_clk_init(soc_config_base, ras_apb_clk);
}
diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
index 44cd27c..670f90d 100644
--- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
+++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c
@@ -29,7 +29,7 @@
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(&pdev->dev, r);
- if (!reg)
+ if (IS_ERR(reg))
return PTR_ERR(reg);
clk_parent = of_clk_get_parent_name(np, 0);
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 5428c9c..72d9727 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -77,13 +77,11 @@
if (i == MAX_APLL_WAIT_TRIES) {
pr_warn("clock: %s failed transition to '%s'\n",
clk_name, (state) ? "locked" : "bypassed");
- } else {
+ r = -EBUSY;
+ } else
pr_debug("clock: %s transition to '%s' in %d loops\n",
clk_name, (state) ? "locked" : "bypassed", i);
- r = 0;
- }
-
return r;
}
@@ -338,7 +336,7 @@
const char *parent_name;
u32 val;
- ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+ ad = kzalloc(sizeof(*ad), GFP_KERNEL);
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
init = kzalloc(sizeof(*init), GFP_KERNEL);
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index abd956d..79791e1 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -161,7 +161,8 @@
}
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX)
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \
+ defined(CONFIG_SOC_AM43XX)
/**
* ti_clk_register_dpll_x2 - Registers a DPLLx2 clock
* @node: device node for this clock
@@ -322,7 +323,7 @@
of_ti_omap4_dpll_x2_setup);
#endif
-#ifdef CONFIG_SOC_AM33XX
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static void __init of_ti_am3_dpll_x2_setup(struct device_node *node)
{
ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 0197a47..e9d650e 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -160,7 +160,7 @@
u8 clk_mux_flags = 0;
u32 mask = 0;
u32 shift = 0;
- u32 flags = 0;
+ u32 flags = CLK_SET_RATE_NO_REPARENT;
num_parents = of_clk_get_parent_count(node);
if (num_parents < 2) {
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index f71d55f..ab51bf20a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -162,7 +162,7 @@
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
-static cycle_t exynos4_frc_read(struct clocksource *cs)
+static cycle_t notrace _exynos4_frc_read(void)
{
unsigned int lo, hi;
u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
@@ -176,6 +176,11 @@
return ((cycle_t)hi << 32) | lo;
}
+static cycle_t exynos4_frc_read(struct clocksource *cs)
+{
+ return _exynos4_frc_read();
+}
+
static void exynos4_frc_resume(struct clocksource *cs)
{
exynos4_mct_frc_start();
@@ -192,13 +197,24 @@
static u64 notrace exynos4_read_sched_clock(void)
{
- return exynos4_frc_read(&mct_frc);
+ return _exynos4_frc_read();
+}
+
+static struct delay_timer exynos4_delay_timer;
+
+static cycles_t exynos4_read_current_timer(void)
+{
+ return _exynos4_frc_read();
}
static void __init exynos4_clocksource_init(void)
{
exynos4_mct_frc_start();
+ exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
+ exynos4_delay_timer.freq = clk_rate;
+ register_current_timer_delay(&exynos4_delay_timer);
+
if (clocksource_register_hz(&mct_frc, clk_rate))
panic("%s: can't register clocksource\n", mct_frc.name);
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 738c8b7..db6d9a2 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -49,7 +49,7 @@
# LITTLE drivers, so that it is probed last.
obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o
+obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 924bb2d..86631cb 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -128,6 +128,7 @@
struct perf_limits {
int no_turbo;
+ int turbo_disabled;
int max_perf_pct;
int min_perf_pct;
int32_t max_perf;
@@ -287,7 +288,10 @@
if (ret != 1)
return -EINVAL;
limits.no_turbo = clamp_t(int, input, 0 , 1);
-
+ if (limits.turbo_disabled) {
+ pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
+ limits.no_turbo = limits.turbo_disabled;
+ }
return count;
}
@@ -357,21 +361,21 @@
{
u64 value;
rdmsrl(BYT_RATIOS, value);
- return (value >> 8) & 0x3F;
+ return (value >> 8) & 0x7F;
}
static int byt_get_max_pstate(void)
{
u64 value;
rdmsrl(BYT_RATIOS, value);
- return (value >> 16) & 0x3F;
+ return (value >> 16) & 0x7F;
}
static int byt_get_turbo_pstate(void)
{
u64 value;
rdmsrl(BYT_TURBO_RATIOS, value);
- return value & 0x3F;
+ return value & 0x7F;
}
static void byt_set_pstate(struct cpudata *cpudata, int pstate)
@@ -381,7 +385,7 @@
u32 vid;
val = pstate << 8;
- if (limits.no_turbo)
+ if (limits.no_turbo && !limits.turbo_disabled)
val |= (u64)1 << 32;
vid_fp = cpudata->vid.min + mul_fp(
@@ -405,8 +409,8 @@
rdmsrl(BYT_VIDS, value);
- cpudata->vid.min = int_tofp((value >> 8) & 0x3f);
- cpudata->vid.max = int_tofp((value >> 16) & 0x3f);
+ cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
+ cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
cpudata->vid.ratio = div_fp(
cpudata->vid.max - cpudata->vid.min,
int_tofp(cpudata->pstate.max_pstate -
@@ -448,7 +452,7 @@
u64 val;
val = pstate << 8;
- if (limits.no_turbo)
+ if (limits.no_turbo && !limits.turbo_disabled)
val |= (u64)1 << 32;
wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
@@ -696,9 +700,8 @@
cpu = all_cpu_data[cpunum];
- intel_pstate_get_cpu_pstates(cpu);
-
cpu->cpu = cpunum;
+ intel_pstate_get_cpu_pstates(cpu);
init_timer_deferrable(&cpu->timer);
cpu->timer.function = intel_pstate_timer_func;
@@ -741,7 +744,7 @@
limits.min_perf = int_tofp(1);
limits.max_perf_pct = 100;
limits.max_perf = int_tofp(1);
- limits.no_turbo = 0;
+ limits.no_turbo = limits.turbo_disabled;
return 0;
}
limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
@@ -784,6 +787,7 @@
{
struct cpudata *cpu;
int rc;
+ u64 misc_en;
rc = intel_pstate_init_cpu(policy->cpu);
if (rc)
@@ -791,8 +795,13 @@
cpu = all_cpu_data[policy->cpu];
- if (!limits.no_turbo &&
- limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
+ rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
+ if (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ||
+ cpu->pstate.max_pstate == cpu->pstate.turbo_pstate) {
+ limits.turbo_disabled = 1;
+ limits.no_turbo = 1;
+ }
+ if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
else
policy->policy = CPUFREQ_POLICY_POWERSAVE;
diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c
index 1d80bd3..b512a4b 100644
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -453,8 +453,8 @@
int error;
jrdev = &pdev->dev;
- jrpriv = kmalloc(sizeof(struct caam_drv_private_jr),
- GFP_KERNEL);
+ jrpriv = devm_kmalloc(jrdev, sizeof(struct caam_drv_private_jr),
+ GFP_KERNEL);
if (!jrpriv)
return -ENOMEM;
@@ -487,10 +487,8 @@
/* Now do the platform independent part */
error = caam_jr_init(jrdev); /* now turn on hardware */
- if (error) {
- kfree(jrpriv);
+ if (error)
return error;
- }
jrpriv->dev = jrdev;
spin_lock(&driver_data.jr_alloc_lock);
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index d028f36..8f8b0b6 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -86,6 +86,9 @@
#define USBSS_IRQ_PD_COMP (1 << 2)
+/* Packet Descriptor */
+#define PD2_ZERO_LENGTH (1 << 19)
+
struct cppi41_channel {
struct dma_chan chan;
struct dma_async_tx_descriptor txd;
@@ -307,7 +310,7 @@
__iormb();
while (val) {
- u32 desc;
+ u32 desc, len;
q_num = __fls(val);
val &= ~(1 << q_num);
@@ -319,9 +322,13 @@
q_num, desc);
continue;
}
- c->residue = pd_trans_len(c->desc->pd6) -
- pd_trans_len(c->desc->pd0);
+ if (c->desc->pd2 & PD2_ZERO_LENGTH)
+ len = 0;
+ else
+ len = pd_trans_len(c->desc->pd0);
+
+ c->residue = pd_trans_len(c->desc->pd6) - len;
dma_cookie_complete(&c->txd);
c->txd.callback(c->txd.callback_param);
}
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 1287146..14867e3 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -255,6 +255,7 @@
enum dma_slave_buswidth word_size;
unsigned int buf_tail;
unsigned int num_bd;
+ unsigned int period_len;
struct sdma_buffer_descriptor *bd;
dma_addr_t bd_phys;
unsigned int pc_from_device, pc_to_device;
@@ -593,6 +594,12 @@
static void sdma_handle_channel_loop(struct sdma_channel *sdmac)
{
+ if (sdmac->desc.callback)
+ sdmac->desc.callback(sdmac->desc.callback_param);
+}
+
+static void sdma_update_channel_loop(struct sdma_channel *sdmac)
+{
struct sdma_buffer_descriptor *bd;
/*
@@ -611,9 +618,6 @@
bd->mode.status |= BD_DONE;
sdmac->buf_tail++;
sdmac->buf_tail %= sdmac->num_bd;
-
- if (sdmac->desc.callback)
- sdmac->desc.callback(sdmac->desc.callback_param);
}
}
@@ -669,6 +673,9 @@
int channel = fls(stat) - 1;
struct sdma_channel *sdmac = &sdma->channel[channel];
+ if (sdmac->flags & IMX_DMA_SG_LOOP)
+ sdma_update_channel_loop(sdmac);
+
tasklet_schedule(&sdmac->tasklet);
__clear_bit(channel, &stat);
@@ -1129,6 +1136,7 @@
sdmac->status = DMA_IN_PROGRESS;
sdmac->buf_tail = 0;
+ sdmac->period_len = period_len;
sdmac->flags |= IMX_DMA_SG_LOOP;
sdmac->direction = direction;
@@ -1225,9 +1233,15 @@
struct dma_tx_state *txstate)
{
struct sdma_channel *sdmac = to_sdma_chan(chan);
+ u32 residue;
+
+ if (sdmac->flags & IMX_DMA_SG_LOOP)
+ residue = (sdmac->num_bd - sdmac->buf_tail) * sdmac->period_len;
+ else
+ residue = sdmac->chn_count - sdmac->chn_real_count;
dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie,
- sdmac->chn_count - sdmac->chn_real_count);
+ residue);
return sdmac->status;
}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 6c65639..d443441 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1464,12 +1464,13 @@
#else
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
{
- int ret;
+ int ret = 0;
DRM_INFO("Replacing VGA console driver\n");
console_lock();
- ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
+ if (con_is_bound(&vga_con))
+ ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
if (ret == 0) {
ret = do_unregister_con_driver(&vga_con);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index a47fbf6..374f964 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -656,6 +656,7 @@
#define QUIRK_PIPEA_FORCE (1<<0)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
+#define QUIRK_BACKLIGHT_PRESENT (1<<3)
struct intel_fbdev;
struct intel_fbc_work;
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 62ef55b..7465ab0 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -74,6 +74,50 @@
if (base == 0)
return 0;
+ /* make sure we don't clobber the GTT if it's within stolen memory */
+ if (INTEL_INFO(dev)->gen <= 4 && !IS_G33(dev) && !IS_G4X(dev)) {
+ struct {
+ u32 start, end;
+ } stolen[2] = {
+ { .start = base, .end = base + dev_priv->gtt.stolen_size, },
+ { .start = base, .end = base + dev_priv->gtt.stolen_size, },
+ };
+ u64 gtt_start, gtt_end;
+
+ gtt_start = I915_READ(PGTBL_CTL);
+ if (IS_GEN4(dev))
+ gtt_start = (gtt_start & PGTBL_ADDRESS_LO_MASK) |
+ (gtt_start & PGTBL_ADDRESS_HI_MASK) << 28;
+ else
+ gtt_start &= PGTBL_ADDRESS_LO_MASK;
+ gtt_end = gtt_start + gtt_total_entries(dev_priv->gtt) * 4;
+
+ if (gtt_start >= stolen[0].start && gtt_start < stolen[0].end)
+ stolen[0].end = gtt_start;
+ if (gtt_end > stolen[1].start && gtt_end <= stolen[1].end)
+ stolen[1].start = gtt_end;
+
+ /* pick the larger of the two chunks */
+ if (stolen[0].end - stolen[0].start >
+ stolen[1].end - stolen[1].start) {
+ base = stolen[0].start;
+ dev_priv->gtt.stolen_size = stolen[0].end - stolen[0].start;
+ } else {
+ base = stolen[1].start;
+ dev_priv->gtt.stolen_size = stolen[1].end - stolen[1].start;
+ }
+
+ if (stolen[0].start != stolen[1].start ||
+ stolen[0].end != stolen[1].end) {
+ DRM_DEBUG_KMS("GTT within stolen memory at 0x%llx-0x%llx\n",
+ (unsigned long long) gtt_start,
+ (unsigned long long) gtt_end - 1);
+ DRM_DEBUG_KMS("Stolen memory adjusted to 0x%x-0x%x\n",
+ base, base + (u32) dev_priv->gtt.stolen_size - 1);
+ }
+ }
+
+
/* Verify that nothing else uses this physical address. Stolen
* memory should be reserved by the BIOS and hidden from the
* kernel. So if the region is already marked as busy, something
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e691b30..a5bab61 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -942,6 +942,9 @@
/*
* Instruction and interrupt control regs
*/
+#define PGTBL_CTL 0x02020
+#define PGTBL_ADDRESS_LO_MASK 0xfffff000 /* bits [31:12] */
+#define PGTBL_ADDRESS_HI_MASK 0x000000f0 /* bits [35:32] (gen4) */
#define PGTBL_ER 0x02024
#define RENDER_RING_BASE 0x02000
#define BSD_RING_BASE 0x04000
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 556c916..e27e780 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11591,6 +11591,14 @@
DRM_INFO("applying inverted panel brightness quirk\n");
}
+/* Some VBT's incorrectly indicate no backlight is present */
+static void quirk_backlight_present(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
+ DRM_INFO("applying backlight present quirk\n");
+}
+
struct intel_quirk {
int device;
int subsystem_vendor;
@@ -11659,6 +11667,12 @@
/* Acer Aspire 5336 */
{ 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
+
+ /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
+ { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
+
+ /* Toshiba CB35 Chromebook (Celeron 2955U) */
+ { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
};
static void intel_init_quirks(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 52fda95..075170d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -28,6 +28,8 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
@@ -336,6 +338,37 @@
return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
}
+/* Reboot notifier handler to shutdown panel power to guarantee T12 timing
+ This function only applicable when panel PM state is not to be tracked */
+static int edp_notify_handler(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp),
+ edp_notifier);
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_div;
+ u32 pp_ctrl_reg, pp_div_reg;
+ enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
+
+ if (!is_edp(intel_dp) || code != SYS_RESTART)
+ return 0;
+
+ if (IS_VALLEYVIEW(dev)) {
+ pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
+ pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
+ pp_div = I915_READ(pp_div_reg);
+ pp_div &= PP_REFERENCE_DIVIDER_MASK;
+
+ /* 0x1F write to PP_DIV_REG sets max cycle delay */
+ I915_WRITE(pp_div_reg, pp_div | 0x1F);
+ I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
+ msleep(intel_dp->panel_power_cycle_delay);
+ }
+
+ return 0;
+}
+
static bool edp_have_panel_power(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
@@ -3707,6 +3740,10 @@
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
edp_panel_vdd_off_sync(intel_dp);
drm_modeset_unlock(&dev->mode_config.connection_mutex);
+ if (intel_dp->edp_notifier.notifier_call) {
+ unregister_reboot_notifier(&intel_dp->edp_notifier);
+ intel_dp->edp_notifier.notifier_call = NULL;
+ }
}
kfree(intel_dig_port);
}
@@ -4184,6 +4221,11 @@
}
mutex_unlock(&dev->mode_config.mutex);
+ if (IS_VALLEYVIEW(dev)) {
+ intel_dp->edp_notifier.notifier_call = edp_notify_handler;
+ register_reboot_notifier(&intel_dp->edp_notifier);
+ }
+
intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
intel_panel_setup_backlight(connector);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index eaa27ee..f67340e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -538,6 +538,8 @@
unsigned long last_power_on;
unsigned long last_backlight_off;
bool psr_setup_done;
+ struct notifier_block edp_notifier;
+
bool use_tps3;
struct intel_connector *attached_connector;
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 02f99d7..3fd0829 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -117,17 +117,18 @@
/* bandgap reset is needed after everytime we do power gate */
band_gap_reset(dev_priv);
+ I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
+ usleep_range(2500, 3000);
+
val = I915_READ(MIPI_PORT_CTRL(pipe));
I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD);
usleep_range(1000, 1500);
- I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT);
- usleep_range(2000, 2500);
+
+ I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT);
+ usleep_range(2500, 3000);
+
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
- usleep_range(2000, 2500);
- I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
- usleep_range(2000, 2500);
- I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
- usleep_range(2000, 2500);
+ usleep_range(2500, 3000);
}
static void intel_dsi_enable(struct intel_encoder *encoder)
@@ -271,23 +272,23 @@
DRM_DEBUG_KMS("\n");
- I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
+ I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER);
usleep_range(2000, 2500);
- I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT);
+ I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT);
usleep_range(2000, 2500);
- I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
+ I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER);
usleep_range(2000, 2500);
- val = I915_READ(MIPI_PORT_CTRL(pipe));
- I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD);
- usleep_range(1000, 1500);
-
if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT)
== 0x00000), 30))
DRM_ERROR("DSI LP not going Low\n");
+ val = I915_READ(MIPI_PORT_CTRL(pipe));
+ I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD);
+ usleep_range(1000, 1500);
+
I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
usleep_range(2000, 2500);
diff --git a/drivers/gpu/drm/i915/intel_dsi_cmd.c b/drivers/gpu/drm/i915/intel_dsi_cmd.c
index 3eeb21b..933c863 100644
--- a/drivers/gpu/drm/i915/intel_dsi_cmd.c
+++ b/drivers/gpu/drm/i915/intel_dsi_cmd.c
@@ -404,12 +404,6 @@
else
cmd |= DPI_LP_MODE;
- /* DPI virtual channel?! */
-
- mask = DPI_FIFO_EMPTY;
- if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(pipe)) & mask) == mask, 50))
- DRM_ERROR("Timeout waiting for DPI FIFO empty.\n");
-
/* clear bit */
I915_WRITE(MIPI_INTR_STAT(pipe), SPL_PKT_SENT_INTERRUPT);
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 2e2c71f..4f6b539 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -403,6 +403,15 @@
DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp);
+ /*
+ * If the acpi_video interface is not supposed to be used, don't
+ * bother processing backlight level change requests from firmware.
+ */
+ if (!acpi_video_verify_backlight_support()) {
+ DRM_DEBUG_KMS("opregion backlight request ignored\n");
+ return 0;
+ }
+
if (!(bclp & ASLE_BCLP_VALID))
return ASLC_BACKLIGHT_FAILED;
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 38a9857..628cd89 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1118,8 +1118,12 @@
int ret;
if (!dev_priv->vbt.backlight.present) {
- DRM_DEBUG_KMS("native backlight control not available per VBT\n");
- return 0;
+ if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) {
+ DRM_DEBUG_KMS("no backlight present per VBT, but present per quirk\n");
+ } else {
+ DRM_DEBUG_KMS("no backlight present per VBT\n");
+ return 0;
+ }
}
/* set level and max in panel struct */
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
index 26e962b..2283c44 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
@@ -1516,11 +1516,11 @@
}
switch ((ctrl & 0x000f0000) >> 16) {
- case 6: datarate = pclk * 30 / 8; break;
- case 5: datarate = pclk * 24 / 8; break;
+ case 6: datarate = pclk * 30; break;
+ case 5: datarate = pclk * 24; break;
case 2:
default:
- datarate = pclk * 18 / 8;
+ datarate = pclk * 18;
break;
}
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c
index 48aa38a..fa30d81 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/nvd0.c
@@ -1159,11 +1159,11 @@
if (outp->info.type == DCB_OUTPUT_DP) {
u32 sync = nv_rd32(priv, 0x660404 + (head * 0x300));
switch ((sync & 0x000003c0) >> 6) {
- case 6: pclk = pclk * 30 / 8; break;
- case 5: pclk = pclk * 24 / 8; break;
+ case 6: pclk = pclk * 30; break;
+ case 5: pclk = pclk * 24; break;
case 2:
default:
- pclk = pclk * 18 / 8;
+ pclk = pclk * 18;
break;
}
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c b/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c
index 52c299c..eb2d778 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/outpdp.c
@@ -34,7 +34,7 @@
struct nvkm_output_dp *outp = (void *)base;
bool retrain = true;
u8 link[2], stat[3];
- u32 rate;
+ u32 linkrate;
int ret, i;
/* check that the link is trained at a high enough rate */
@@ -44,8 +44,10 @@
goto done;
}
- rate = link[0] * 27000 * (link[1] & DPCD_LC01_LANE_COUNT_SET);
- if (rate < ((datarate / 8) * 10)) {
+ linkrate = link[0] * 27000 * (link[1] & DPCD_LC01_LANE_COUNT_SET);
+ linkrate = (linkrate * 8) / 10; /* 8B/10B coding overhead */
+ datarate = (datarate + 9) / 10; /* -> decakilobits */
+ if (linkrate < datarate) {
DBG("link not trained at sufficient rate\n");
goto done;
}
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c
index e183277..7a1ebdf 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/sornv50.c
@@ -87,6 +87,7 @@
struct nvkm_output_dp *outpdp = (void *)outp;
switch (data) {
case NV94_DISP_SOR_DP_PWR_STATE_OFF:
+ nouveau_event_put(outpdp->irq);
((struct nvkm_output_dp_impl *)nv_oclass(outp))
->lnk_pwr(outpdp, 0);
atomic_set(&outpdp->lt.done, 0);
diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h
index 0f57fcf..2af9cfd 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h
+++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramfuc.h
@@ -26,7 +26,7 @@
};
}
-static inline struct ramfuc_reg
+static noinline struct ramfuc_reg
ramfuc_reg(u32 addr)
{
return ramfuc_reg2(addr, addr);
@@ -107,7 +107,7 @@
#define ram_init(s,p) ramfuc_init(&(s)->base, (p))
#define ram_exec(s,e) ramfuc_exec(&(s)->base, (e))
-#define ram_have(s,r) ((s)->r_##r.addr != 0x000000)
+#define ram_have(s,r) ((s)->r_##r.addr[0] != 0x000000)
#define ram_rd32(s,r) ramfuc_rd32(&(s)->base, &(s)->r_##r)
#define ram_wr32(s,r,d) ramfuc_wr32(&(s)->base, &(s)->r_##r, (d))
#define ram_nuke(s,r) ramfuc_nuke(&(s)->base, &(s)->r_##r)
diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c
index 1ad3ea5..c5b46e3 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/fb/ramnve0.c
@@ -200,6 +200,7 @@
/* (re)program mempll, if required */
if (ram->mode == 2) {
ram_mask(fuc, 0x1373f4, 0x00010000, 0x00000000);
+ ram_mask(fuc, 0x132000, 0x80000000, 0x80000000);
ram_mask(fuc, 0x132000, 0x00000001, 0x00000000);
ram_mask(fuc, 0x132004, 0x103fffff, mcoef);
ram_mask(fuc, 0x132000, 0x00000001, 0x00000001);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index ddd8375..5425ffe 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -652,12 +652,12 @@
ret = nouveau_do_resume(drm_dev);
if (ret)
return ret;
- if (drm_dev->mode_config.num_crtc)
- nouveau_fbcon_set_suspend(drm_dev, 0);
- nouveau_fbcon_zfill_all(drm_dev);
- if (drm_dev->mode_config.num_crtc)
+ if (drm_dev->mode_config.num_crtc) {
nouveau_display_resume(drm_dev);
+ nouveau_fbcon_set_suspend(drm_dev, 0);
+ }
+
return 0;
}
@@ -683,11 +683,12 @@
ret = nouveau_do_resume(drm_dev);
if (ret)
return ret;
- if (drm_dev->mode_config.num_crtc)
- nouveau_fbcon_set_suspend(drm_dev, 0);
- nouveau_fbcon_zfill_all(drm_dev);
- if (drm_dev->mode_config.num_crtc)
+
+ if (drm_dev->mode_config.num_crtc) {
nouveau_display_resume(drm_dev);
+ nouveau_fbcon_set_suspend(drm_dev, 0);
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 64a42cf..191665e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -531,17 +531,10 @@
if (state == 1)
nouveau_fbcon_save_disable_accel(dev);
fb_set_suspend(drm->fbcon->helper.fbdev, state);
- if (state == 0)
+ if (state == 0) {
nouveau_fbcon_restore_accel(dev);
+ nouveau_fbcon_zfill(dev, drm->fbcon);
+ }
console_unlock();
}
}
-
-void
-nouveau_fbcon_zfill_all(struct drm_device *dev)
-{
- struct nouveau_drm *drm = nouveau_drm(dev);
- if (drm->fbcon) {
- nouveau_fbcon_zfill(dev, drm->fbcon);
- }
-}
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
index fdfc0c9..fcff797 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
@@ -61,7 +61,6 @@
int nouveau_fbcon_init(struct drm_device *dev);
void nouveau_fbcon_fini(struct drm_device *dev);
void nouveau_fbcon_set_suspend(struct drm_device *dev, int state);
-void nouveau_fbcon_zfill_all(struct drm_device *dev);
void nouveau_fbcon_save_disable_accel(struct drm_device *dev);
void nouveau_fbcon_restore_accel(struct drm_device *dev);
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index afdf607..4c534b7 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -1741,7 +1741,8 @@
}
}
- mthd = (ffs(nv_encoder->dcb->sorconf.link) - 1) << 2;
+ mthd = (ffs(nv_encoder->dcb->heads) - 1) << 3;
+ mthd |= (ffs(nv_encoder->dcb->sorconf.link) - 1) << 2;
mthd |= nv_encoder->or;
if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 35f4182..b1e11f8 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -127,7 +127,7 @@
/* flags not zero */
if (args.v1.ucReplyStatus == 2) {
DRM_DEBUG_KMS("dp_aux_ch flags not zero\n");
- r = -EBUSY;
+ r = -EIO;
goto done;
}
diff --git a/drivers/gpu/drm/radeon/ci_dpm.c b/drivers/gpu/drm/radeon/ci_dpm.c
index 10dae41..584090a 100644
--- a/drivers/gpu/drm/radeon/ci_dpm.c
+++ b/drivers/gpu/drm/radeon/ci_dpm.c
@@ -1179,7 +1179,7 @@
tmp &= ~GLOBAL_PWRMGT_EN;
WREG32_SMC(GENERAL_PWRMGT, tmp);
- tmp = RREG32(SCLK_PWRMGT_CNTL);
+ tmp = RREG32_SMC(SCLK_PWRMGT_CNTL);
tmp &= ~DYNAMIC_PM_EN;
WREG32_SMC(SCLK_PWRMGT_CNTL, tmp);
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index dcd4518..0b24711 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -7676,14 +7676,16 @@
addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR);
status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS);
mc_client = RREG32(VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT);
+ /* reset addr and status */
+ WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
+ if (addr == 0x0 && status == 0x0)
+ break;
dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data);
dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n",
addr);
dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n",
status);
cik_vm_decode_fault(rdev, status, addr, mc_client);
- /* reset addr and status */
- WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
break;
case 167: /* VCE */
DRM_DEBUG("IH: VCE int: 0x%08x\n", src_data);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index e2f6052..f7ece0f 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -189,7 +189,7 @@
0x8c1c, 0xffffffff, 0x00001010,
0x28350, 0xffffffff, 0x00000000,
0xa008, 0xffffffff, 0x00010000,
- 0x5cc, 0xffffffff, 0x00000001,
+ 0x5c4, 0xffffffff, 0x00000001,
0x9508, 0xffffffff, 0x00000002,
0x913c, 0x0000000f, 0x0000000a
};
@@ -476,7 +476,7 @@
0x8c1c, 0xffffffff, 0x00001010,
0x28350, 0xffffffff, 0x00000000,
0xa008, 0xffffffff, 0x00010000,
- 0x5cc, 0xffffffff, 0x00000001,
+ 0x5c4, 0xffffffff, 0x00000001,
0x9508, 0xffffffff, 0x00000002
};
@@ -635,7 +635,7 @@
static const u32 supersumo_golden_registers[] =
{
0x5eb4, 0xffffffff, 0x00000002,
- 0x5cc, 0xffffffff, 0x00000001,
+ 0x5c4, 0xffffffff, 0x00000001,
0x7030, 0xffffffff, 0x00000011,
0x7c30, 0xffffffff, 0x00000011,
0x6104, 0x01000300, 0x00000000,
@@ -719,7 +719,7 @@
static const u32 wrestler_golden_registers[] =
{
0x5eb4, 0xffffffff, 0x00000002,
- 0x5cc, 0xffffffff, 0x00000001,
+ 0x5c4, 0xffffffff, 0x00000001,
0x7030, 0xffffffff, 0x00000011,
0x7c30, 0xffffffff, 0x00000011,
0x6104, 0x01000300, 0x00000000,
@@ -5066,14 +5066,16 @@
case 147:
addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR);
status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS);
+ /* reset addr and status */
+ WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
+ if (addr == 0x0 && status == 0x0)
+ break;
dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data);
dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n",
addr);
dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n",
status);
cayman_vm_decode_fault(rdev, status, addr);
- /* reset addr and status */
- WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
break;
case 176: /* CP_INT in ring buffer */
case 177: /* CP_INT in IB1 */
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c
index da041a4..3c76e1d 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -2329,12 +2329,6 @@
pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss,
ASIC_INTERNAL_MEMORY_SS, 0);
- /* disable ss, causes hangs on some cayman boards */
- if (rdev->family == CHIP_CAYMAN) {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
- }
-
if (pi->sclk_ss || pi->mclk_ss)
pi->dynamic_ss = true;
else
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 730cee2..eba0225 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -6376,14 +6376,16 @@
case 147:
addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR);
status = RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS);
+ /* reset addr and status */
+ WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
+ if (addr == 0x0 && status == 0x0)
+ break;
dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data);
dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x%08X\n",
addr);
dev_err(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n",
status);
si_vm_decode_fault(rdev, status, addr);
- /* reset addr and status */
- WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
break;
case 176: /* RINGID0 CP_INT */
radeon_fence_process(rdev, RADEON_RING_TYPE_GFX_INDEX);
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 800c8b6..5e79c6a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -810,7 +810,7 @@
config HID_SENSOR_HUB
tristate "HID Sensors framework support"
- depends on HID
+ depends on HID && HAS_IOMEM
select MFD_CORE
default n
---help---
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6d00bb9..48b66bb 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -323,6 +323,7 @@
#define USB_VENDOR_ID_ETURBOTOUCH 0x22b9
#define USB_DEVICE_ID_ETURBOTOUCH 0x0006
+#define USB_DEVICE_ID_ETURBOTOUCH_2968 0x2968
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
@@ -715,6 +716,8 @@
#define USB_VENDOR_ID_PENMOUNT 0x14e1
#define USB_DEVICE_ID_PENMOUNT_PCI 0x3500
+#define USB_DEVICE_ID_PENMOUNT_1610 0x1610
+#define USB_DEVICE_ID_PENMOUNT_1640 0x1640
#define USB_VENDOR_ID_PETALYNX 0x18b1
#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 2451c7e..578bbe6 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -428,6 +428,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int rmi_post_reset(struct hid_device *hdev)
{
return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
@@ -437,6 +438,7 @@
{
return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
}
+#endif /* CONFIG_PM */
#define RMI4_MAX_PAGE 0xff
#define RMI4_PAGE_SIZE 0x0100
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index a8d5c8f..e244e44 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -159,17 +159,18 @@
{
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev);
+ unsigned long flags;
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
callback->hsdev == hsdev) {
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return -EINVAL;
}
callback = kzalloc(sizeof(*callback), GFP_ATOMIC);
if (!callback) {
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return -ENOMEM;
}
callback->hsdev = hsdev;
@@ -177,7 +178,7 @@
callback->usage_id = usage_id;
callback->priv = NULL;
list_add_tail(&callback->list, &pdata->dyn_callback_list);
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
@@ -188,8 +189,9 @@
{
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hsdev->hdev);
+ unsigned long flags;
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
if (callback->usage_id == usage_id &&
callback->hsdev == hsdev) {
@@ -197,7 +199,7 @@
kfree(callback);
break;
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
@@ -378,15 +380,16 @@
{
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
struct hid_sensor_hub_callbacks_list *callback;
+ unsigned long flags;
hid_dbg(hdev, " sensor_hub_suspend\n");
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list) {
if (callback->usage_callback->suspend)
callback->usage_callback->suspend(
callback->hsdev, callback->priv);
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
@@ -395,15 +398,16 @@
{
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
struct hid_sensor_hub_callbacks_list *callback;
+ unsigned long flags;
hid_dbg(hdev, " sensor_hub_resume\n");
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list) {
if (callback->usage_callback->resume)
callback->usage_callback->resume(
callback->hsdev, callback->priv);
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
}
@@ -632,6 +636,7 @@
if (name == NULL) {
hid_err(hdev, "Failed MFD device name\n");
ret = -ENOMEM;
+ kfree(hsdev);
goto err_no_mem;
}
sd->hid_sensor_hub_client_devs[
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 59badc1..31e6727 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -49,6 +49,7 @@
{ USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH_2968, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
@@ -76,6 +77,8 @@
{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
+ { USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1610, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1640, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index e84f452..ae22e3c 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -339,9 +339,13 @@
*/
do {
- hv_begin_read(&channel->inbound);
+ if (read_state)
+ hv_begin_read(&channel->inbound);
channel->onchannel_callback(arg);
- bytes_to_read = hv_end_read(&channel->inbound);
+ if (read_state)
+ bytes_to_read = hv_end_read(&channel->inbound);
+ else
+ bytes_to_read = 0;
} while (read_state && (bytes_to_read != 0));
} else {
pr_err("no channel callback for relid - %u\n", relid);
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index ea85253..521c146 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -127,6 +127,17 @@
kvp_respond_to_host(NULL, HV_E_FAIL);
}
+static void poll_channel(struct vmbus_channel *channel)
+{
+ if (channel->target_cpu != smp_processor_id())
+ smp_call_function_single(channel->target_cpu,
+ hv_kvp_onchannelcallback,
+ channel, true);
+ else
+ hv_kvp_onchannelcallback(channel);
+}
+
+
static int kvp_handle_handshake(struct hv_kvp_msg *msg)
{
int ret = 1;
@@ -155,7 +166,7 @@
kvp_register(dm_reg_value);
kvp_transaction.active = false;
if (kvp_transaction.kvp_context)
- hv_kvp_onchannelcallback(kvp_transaction.kvp_context);
+ poll_channel(kvp_transaction.kvp_context);
}
return ret;
}
@@ -568,7 +579,7 @@
vmbus_sendpacket(channel, recv_buffer, buf_len, req_id,
VM_PKT_DATA_INBAND, 0);
-
+ poll_channel(channel);
}
/*
@@ -603,7 +614,7 @@
return;
}
- vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 2, &recvlen,
+ vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 4, &recvlen,
&requestid);
if (recvlen > 0) {
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index dd76180..3b9c9ef 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -319,7 +319,7 @@
(struct hv_util_service *)dev_id->driver_data;
int ret;
- srv->recv_buffer = kmalloc(PAGE_SIZE * 2, GFP_KERNEL);
+ srv->recv_buffer = kmalloc(PAGE_SIZE * 4, GFP_KERNEL);
if (!srv->recv_buffer)
return -ENOMEM;
if (srv->util_init) {
diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c
index 5ffd81f..0625e50 100644
--- a/drivers/hwmon/adc128d818.c
+++ b/drivers/hwmon/adc128d818.c
@@ -239,50 +239,50 @@
return sprintf(buf, "%u\n", !!(alarms & mask));
}
-static SENSOR_DEVICE_ATTR_2(in0_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 0, 0);
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO,
+ adc128_show_in, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 0, 1);
static SENSOR_DEVICE_ATTR_2(in0_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 0, 2);
-static SENSOR_DEVICE_ATTR_2(in1_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 1, 0);
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO,
+ adc128_show_in, NULL, 1, 0);
static SENSOR_DEVICE_ATTR_2(in1_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 1, 1);
static SENSOR_DEVICE_ATTR_2(in1_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 1, 2);
-static SENSOR_DEVICE_ATTR_2(in2_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 2, 0);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO,
+ adc128_show_in, NULL, 2, 0);
static SENSOR_DEVICE_ATTR_2(in2_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 2, 1);
static SENSOR_DEVICE_ATTR_2(in2_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 2, 2);
-static SENSOR_DEVICE_ATTR_2(in3_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 3, 0);
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO,
+ adc128_show_in, NULL, 3, 0);
static SENSOR_DEVICE_ATTR_2(in3_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 3, 1);
static SENSOR_DEVICE_ATTR_2(in3_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 3, 2);
-static SENSOR_DEVICE_ATTR_2(in4_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 4, 0);
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO,
+ adc128_show_in, NULL, 4, 0);
static SENSOR_DEVICE_ATTR_2(in4_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 4, 1);
static SENSOR_DEVICE_ATTR_2(in4_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 4, 2);
-static SENSOR_DEVICE_ATTR_2(in5_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 5, 0);
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO,
+ adc128_show_in, NULL, 5, 0);
static SENSOR_DEVICE_ATTR_2(in5_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 5, 1);
static SENSOR_DEVICE_ATTR_2(in5_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 5, 2);
-static SENSOR_DEVICE_ATTR_2(in6_input, S_IWUSR | S_IRUGO,
- adc128_show_in, adc128_set_in, 6, 0);
+static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO,
+ adc128_show_in, NULL, 6, 0);
static SENSOR_DEVICE_ATTR_2(in6_min, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 6, 1);
static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO,
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 3eb4281..d74241b 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -185,7 +185,7 @@
struct adm1021_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
long temp;
- int err;
+ int reg_val, err;
err = kstrtol(buf, 10, &temp);
if (err)
@@ -193,10 +193,11 @@
temp /= 1000;
mutex_lock(&data->update_lock);
- data->temp_max[index] = clamp_val(temp, -128, 127);
+ reg_val = clamp_val(temp, -128, 127);
+ data->temp_max[index] = reg_val * 1000;
if (!read_only)
i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
- data->temp_max[index]);
+ reg_val);
mutex_unlock(&data->update_lock);
return count;
@@ -210,7 +211,7 @@
struct adm1021_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
long temp;
- int err;
+ int reg_val, err;
err = kstrtol(buf, 10, &temp);
if (err)
@@ -218,10 +219,11 @@
temp /= 1000;
mutex_lock(&data->update_lock);
- data->temp_min[index] = clamp_val(temp, -128, 127);
+ reg_val = clamp_val(temp, -128, 127);
+ data->temp_min[index] = reg_val * 1000;
if (!read_only)
i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
- data->temp_min[index]);
+ reg_val);
mutex_unlock(&data->update_lock);
return count;
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 78339e8..2804571 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -232,6 +232,9 @@
/* Update the value */
reg = (reg & 0x3F) | (val << 6);
+ /* Update the cache */
+ data->fan_div[attr->index] = reg;
+
/* Write value */
i2c_smbus_write_byte_data(client,
ADM1029_REG_FAN_DIV[attr->index], reg);
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index a8a540c..51c1a5a 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -365,6 +365,7 @@
if (ret)
return ret;
+ val = clamp_val(val, 0, 127000);
mutex_lock(&data->update_lock);
data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
@@ -394,6 +395,7 @@
if (ret)
return ret;
+ val = clamp_val(val, 0, 127000);
mutex_lock(&data->update_lock);
data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr],
data->pwm[nr]);
@@ -696,7 +698,7 @@
if (ret)
return ret;
- val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
+ val = clamp_val(val, -55000, 127000);
mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
@@ -717,7 +719,7 @@
if (ret)
return ret;
- val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
+ val = clamp_val(val, -55000, 127000);
mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
@@ -738,7 +740,7 @@
if (ret)
return ret;
- val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875);
+ val = clamp_val(val, -55000, 127000);
mutex_lock(&data->update_lock);
data->temp_crit[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index eea8172..9f2be3d 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -704,7 +704,7 @@
get_temp_alarm, NULL, IDX_TEMP1_MAX);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
get_temp_alarm, NULL, IDX_TEMP1_CRIT);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO,
get_temp, NULL, IDX_TEMP2_INPUT);
static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
set_temp, IDX_TEMP2_MIN);
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index fd892dd..78002de 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -250,9 +250,7 @@
if (result < 0)
return result;
- val = DIV_ROUND_CLOSEST(val, 1000);
- if ((val < -63) || (val > 127))
- return -EINVAL;
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127);
mutex_lock(&data->update_lock);
data->temp_min[nr] = val;
@@ -274,9 +272,7 @@
if (result < 0)
return result;
- val = DIV_ROUND_CLOSEST(val, 1000);
- if ((val < -63) || (val > 127))
- return -EINVAL;
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127);
mutex_lock(&data->update_lock);
data->temp_max[nr] = val;
@@ -390,15 +386,14 @@
{
struct emc2103_data *data = emc2103_update_device(dev);
struct i2c_client *client = to_i2c_client(dev);
- long rpm_target;
+ unsigned long rpm_target;
- int result = kstrtol(buf, 10, &rpm_target);
+ int result = kstrtoul(buf, 10, &rpm_target);
if (result < 0)
return result;
/* Datasheet states 16384 as maximum RPM target (table 3.2) */
- if ((rpm_target < 0) || (rpm_target > 16384))
- return -EINVAL;
+ rpm_target = clamp_val(rpm_target, 0, 16384);
mutex_lock(&data->update_lock);
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index bdfbe91..ae66f42 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -512,7 +512,7 @@
}
dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n",
- pdev->name);
+ pdev_id->name);
return 0;
err_after_sysfs:
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index 09de4fd..4d75d47 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -22,7 +22,6 @@
*
*/
#include <linux/clk.h>
-#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/interrupt.h>
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index f7f9865..f6d313e 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -40,6 +40,7 @@
config I2C_MUX_PCA954x
tristate "Philips PCA954x I2C Mux/switches"
+ depends on GPIOLIB
help
If you say yes here you get support for the Philips PCA954x
I2C mux/switch devices.
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 53b2132..4cba2d8 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2003 Christophe Saout <christophe@saout.de>
+ * Copyright (C) 2003 Jana Saout <jana@saout.de>
* Copyright (C) 2004 Clemens Fruhwirth <clemens@endorphin.org>
* Copyright (C) 2006-2009 Red Hat, Inc. All rights reserved.
* Copyright (C) 2013 Milan Broz <gmazyland@gmail.com>
@@ -1996,6 +1996,6 @@
module_init(dm_crypt_init);
module_exit(dm_crypt_exit);
-MODULE_AUTHOR("Christophe Saout <christophe@saout.de>");
+MODULE_AUTHOR("Jana Saout <jana@saout.de>");
MODULE_DESCRIPTION(DM_NAME " target for transparent encryption / decryption");
MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index 3842ac7..db404a0 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -10,6 +10,7 @@
#include <linux/device-mapper.h>
#include <linux/bio.h>
+#include <linux/completion.h>
#include <linux/mempool.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -32,7 +33,7 @@
struct io {
unsigned long error_bits;
atomic_t count;
- struct task_struct *sleeper;
+ struct completion *wait;
struct dm_io_client *client;
io_notify_fn callback;
void *context;
@@ -121,8 +122,8 @@
invalidate_kernel_vmap_range(io->vma_invalidate_address,
io->vma_invalidate_size);
- if (io->sleeper)
- wake_up_process(io->sleeper);
+ if (io->wait)
+ complete(io->wait);
else {
unsigned long r = io->error_bits;
@@ -387,6 +388,7 @@
*/
volatile char io_[sizeof(struct io) + __alignof__(struct io) - 1];
struct io *io = (struct io *)PTR_ALIGN(&io_, __alignof__(struct io));
+ DECLARE_COMPLETION_ONSTACK(wait);
if (num_regions > 1 && (rw & RW_MASK) != WRITE) {
WARN_ON(1);
@@ -395,7 +397,7 @@
io->error_bits = 0;
atomic_set(&io->count, 1); /* see dispatch_io() */
- io->sleeper = current;
+ io->wait = &wait;
io->client = client;
io->vma_invalidate_address = dp->vma_invalidate_address;
@@ -403,15 +405,7 @@
dispatch_io(rw, num_regions, where, dp, io, 1);
- while (1) {
- set_current_state(TASK_UNINTERRUPTIBLE);
-
- if (!atomic_read(&io->count))
- break;
-
- io_schedule();
- }
- set_current_state(TASK_RUNNING);
+ wait_for_completion_io(&wait);
if (error_bits)
*error_bits = io->error_bits;
@@ -434,7 +428,7 @@
io = mempool_alloc(client->pool, GFP_NOIO);
io->error_bits = 0;
atomic_set(&io->count, 1); /* see dispatch_io() */
- io->sleeper = NULL;
+ io->wait = NULL;
io->client = client;
io->callback = fn;
io->context = context;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 3f6fd9d..f4167b0 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1611,8 +1611,9 @@
spin_lock_irqsave(&m->lock, flags);
- /* pg_init in progress, requeue until done */
- if (!pg_ready(m)) {
+ /* pg_init in progress or no paths available */
+ if (m->pg_init_in_progress ||
+ (!m->nr_valid_paths && m->queue_if_no_path)) {
busy = 1;
goto out;
}
diff --git a/drivers/md/dm-zero.c b/drivers/md/dm-zero.c
index c99003e..b9a64bb 100644
--- a/drivers/md/dm-zero.c
+++ b/drivers/md/dm-zero.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2003 Christophe Saout <christophe@saout.de>
+ * Copyright (C) 2003 Jana Saout <jana@saout.de>
*
* This file is released under the GPL.
*/
@@ -79,6 +79,6 @@
module_init(dm_zero_init)
module_exit(dm_zero_exit)
-MODULE_AUTHOR("Christophe Saout <christophe@saout.de>");
+MODULE_AUTHOR("Jana Saout <jana@saout.de>");
MODULE_DESCRIPTION(DM_NAME " dummy target returning zeros");
MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 437d990..32b958d 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -54,6 +54,8 @@
static DECLARE_WORK(deferred_remove_work, do_deferred_remove);
+static struct workqueue_struct *deferred_remove_workqueue;
+
/*
* For bio-based dm.
* One of these is allocated per bio.
@@ -276,16 +278,24 @@
if (r)
goto out_free_rq_tio_cache;
+ deferred_remove_workqueue = alloc_workqueue("kdmremove", WQ_UNBOUND, 1);
+ if (!deferred_remove_workqueue) {
+ r = -ENOMEM;
+ goto out_uevent_exit;
+ }
+
_major = major;
r = register_blkdev(_major, _name);
if (r < 0)
- goto out_uevent_exit;
+ goto out_free_workqueue;
if (!_major)
_major = r;
return 0;
+out_free_workqueue:
+ destroy_workqueue(deferred_remove_workqueue);
out_uevent_exit:
dm_uevent_exit();
out_free_rq_tio_cache:
@@ -299,6 +309,7 @@
static void local_exit(void)
{
flush_scheduled_work();
+ destroy_workqueue(deferred_remove_workqueue);
kmem_cache_destroy(_rq_tio_cache);
kmem_cache_destroy(_io_cache);
@@ -407,7 +418,7 @@
if (atomic_dec_and_test(&md->open_count) &&
(test_bit(DMF_DEFERRED_REMOVE, &md->flags)))
- schedule_work(&deferred_remove_work);
+ queue_work(deferred_remove_workqueue, &deferred_remove_work);
dm_put(md);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 63a54a3..1c8592b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3135,8 +3135,13 @@
if (probe)
return 0;
- /* Wait for Transaction Pending bit clean */
- if (pci_wait_for_pending(dev, pos + PCI_AF_STATUS, PCI_AF_STATUS_TP))
+ /*
+ * Wait for Transaction Pending bit to clear. A word-aligned test
+ * is used, so we use the conrol offset rather than status and shift
+ * the test bit to match.
+ */
+ if (pci_wait_for_pending(dev, pos + PCI_AF_CTRL,
+ PCI_AF_STATUS_TP << 8))
goto clear;
dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 16a2f06..64b98d2 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -112,6 +112,7 @@
config PHY_SUN4I_USB
tristate "Allwinner sunxi SoC USB PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the transceiver that is part of Allwinner
@@ -122,6 +123,7 @@
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
select GENERIC_PHY
select MFD_SYSCON
help
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index c64a2f3..49c4465 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -614,8 +614,9 @@
return phy;
put_dev:
- put_device(&phy->dev);
- ida_remove(&phy_ida, phy->id);
+ put_device(&phy->dev); /* calls phy_release() which frees resources */
+ return ERR_PTR(ret);
+
free_phy:
kfree(phy);
return ERR_PTR(ret);
@@ -799,7 +800,7 @@
phy = to_phy(dev);
dev_vdbg(dev, "releasing '%s'\n", dev_name(dev));
- ida_remove(&phy_ida, phy->id);
+ ida_simple_remove(&phy_ida, phy->id);
kfree(phy);
}
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 7007c11..34b3961 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -233,8 +233,8 @@
if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
- if (!phy->phy_base)
- return -ENOMEM;
+ if (IS_ERR(phy->phy_base))
+ return PTR_ERR(phy->phy_base);
phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
}
@@ -262,7 +262,6 @@
otg->phy = &phy->phy;
platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, &ops, NULL);
if (IS_ERR(generic_phy))
@@ -270,10 +269,13 @@
phy_set_drvdata(generic_phy, phy);
+ pm_runtime_enable(phy->dev);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
- if (IS_ERR(phy_provider))
+ if (IS_ERR(phy_provider)) {
+ pm_runtime_disable(phy->dev);
return PTR_ERR(phy_provider);
+ }
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
@@ -317,6 +319,7 @@
if (!IS_ERR(phy->optclk))
clk_unprepare(phy->optclk);
usb_remove_phy(&phy->phy);
+ pm_runtime_disable(phy->dev);
return 0;
}
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c
index 8a8c6bc..1e69a32 100644
--- a/drivers/phy/phy-samsung-usb2.c
+++ b/drivers/phy/phy-samsung-usb2.c
@@ -107,6 +107,7 @@
#endif
{ },
};
+MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
static int samsung_usb2_phy_probe(struct platform_device *pdev)
{
diff --git a/drivers/pinctrl/berlin/berlin.c b/drivers/pinctrl/berlin/berlin.c
index edf5d2f..86db223 100644
--- a/drivers/pinctrl/berlin/berlin.c
+++ b/drivers/pinctrl/berlin/berlin.c
@@ -320,7 +320,7 @@
regmap = dev_get_regmap(&pdev->dev, NULL);
if (!regmap)
- return PTR_ERR(regmap);
+ return -ENODEV;
pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index f1ca75e..5f38c7f 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -211,6 +211,10 @@
configlen++;
pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
+ if (!pinconfig) {
+ kfree(*map);
+ return -ENOMEM;
+ }
if (!of_property_read_u32(node, "allwinner,drive", &val)) {
u16 strength = (val + 1) * 10;
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index a99c631..2c516f2 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -306,7 +306,7 @@
{
struct imx_thermal_data *data = platform_get_drvdata(pdev);
struct regmap *map;
- int t1, t2, n1, n2;
+ int t1, n1;
int ret;
u32 val;
u64 temp64;
@@ -333,14 +333,10 @@
/*
* Sensor data layout:
* [31:20] - sensor value @ 25C
- * [19:8] - sensor value of hot
- * [7:0] - hot temperature value
* Use universal formula now and only need sensor value @ 25C
* slope = 0.4297157 - (0.0015976 * 25C fuse)
*/
n1 = val >> 20;
- n2 = (val & 0xfff00) >> 8;
- t2 = val & 0xff;
t1 = 25; /* t1 always 25C */
/*
@@ -366,16 +362,16 @@
data->c2 = n1 * data->c1 + 1000 * t1;
/*
- * Set the default passive cooling trip point to 20 °C below the
- * maximum die temperature. Can be changed from userspace.
+ * Set the default passive cooling trip point,
+ * can be changed from userspace.
*/
- data->temp_passive = 1000 * (t2 - 20);
+ data->temp_passive = IMX_TEMP_PASSIVE;
/*
- * The maximum die temperature is t2, let's give 5 °C cushion
- * for noise and possible temperature rise between measurements.
+ * The maximum die temperature set to 20 C higher than
+ * IMX_TEMP_PASSIVE.
*/
- data->temp_critical = 1000 * (t2 - 5);
+ data->temp_critical = 1000 * 20 + data->temp_passive;
return 0;
}
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 04b1be7..4b2b999 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -156,8 +156,8 @@
ret = thermal_zone_bind_cooling_device(thermal,
tbp->trip_id, cdev,
- tbp->min,
- tbp->max);
+ tbp->max,
+ tbp->min);
if (ret)
return ret;
}
@@ -712,11 +712,12 @@
}
i = 0;
- for_each_child_of_node(child, gchild)
+ for_each_child_of_node(child, gchild) {
ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++],
tz->trips, tz->ntrips);
if (ret)
goto free_tbps;
+ }
finish:
of_node_put(child);
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index fdb0719..1967bee 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -140,6 +140,12 @@
return NULL;
}
+static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz)
+{
+ unsigned long temp;
+ return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp);
+}
+
int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
{
struct thermal_hwmon_device *hwmon;
@@ -189,21 +195,18 @@
if (result)
goto free_temp_mem;
- if (tz->ops->get_crit_temp) {
- unsigned long temperature;
- if (!tz->ops->get_crit_temp(tz, &temperature)) {
- snprintf(temp->temp_crit.name,
- sizeof(temp->temp_crit.name),
+ if (thermal_zone_crit_temp_valid(tz)) {
+ snprintf(temp->temp_crit.name,
+ sizeof(temp->temp_crit.name),
"temp%d_crit", hwmon->count);
- temp->temp_crit.attr.attr.name = temp->temp_crit.name;
- temp->temp_crit.attr.attr.mode = 0444;
- temp->temp_crit.attr.show = temp_crit_show;
- sysfs_attr_init(&temp->temp_crit.attr.attr);
- result = device_create_file(hwmon->device,
- &temp->temp_crit.attr);
- if (result)
- goto unregister_input;
- }
+ temp->temp_crit.attr.attr.name = temp->temp_crit.name;
+ temp->temp_crit.attr.attr.mode = 0444;
+ temp->temp_crit.attr.show = temp_crit_show;
+ sysfs_attr_init(&temp->temp_crit.attr.attr);
+ result = device_create_file(hwmon->device,
+ &temp->temp_crit.attr);
+ if (result)
+ goto unregister_input;
}
mutex_lock(&thermal_hwmon_list_lock);
@@ -250,7 +253,7 @@
}
device_remove_file(hwmon->device, &temp->temp_input.attr);
- if (tz->ops->get_crit_temp)
+ if (thermal_zone_crit_temp_valid(tz))
device_remove_file(hwmon->device, &temp->temp_crit.attr);
mutex_lock(&thermal_hwmon_list_lock);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index a1271b5..634b6ce 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1155,7 +1155,7 @@
/* register shadow for context save and restore */
bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
bgp->conf->sensor_count, GFP_KERNEL);
- if (!bgp) {
+ if (!bgp->regval) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
}
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index c9f5c9d..008c223 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -177,7 +177,7 @@
uart->port.icount.tx++;
uart->port.x_char = 0;
sent = 1;
- } else if (xmit->tail != xmit->head) { /* TODO: uart_circ_empty */
+ } else if (!uart_circ_empty(xmit)) {
ch = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx++;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e2f9387..044e86d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -567,6 +567,9 @@
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
+ if (uart_circ_empty(&port->state->xmit))
+ return;
+
if (USE_IRDA(sport)) {
/* half duplex in IrDA mode; have to disable receive mode */
temp = readl(sport->port.membase + UCR4);
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index 1efd4c3..99b7b86 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -603,6 +603,8 @@
} else {
struct circ_buf *xmit = &port->state->xmit;
+ if (uart_circ_empty(xmit))
+ return;
writeb(xmit->buf[xmit->tail], &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 68f2c53..5702828 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -266,9 +266,11 @@
if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- up->port.icount.tx++;
+ if (!uart_circ_empty(xmit)) {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ }
}
while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
#else
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 8193635..f7ad5b9 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -653,6 +653,8 @@
} else {
struct circ_buf *xmit = &port->state->xmit;
+ if (uart_circ_empty(xmit))
+ goto out;
write_zsdata(uap, xmit->buf[xmit->tail]);
zssync(uap);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -661,6 +663,7 @@
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
}
+ out:
pmz_debug("pmz: start_tx() done.\n");
}
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 80a58ec..2f57df9 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -427,6 +427,9 @@
struct circ_buf *xmit = &up->port.state->xmit;
int i;
+ if (uart_circ_empty(xmit))
+ return;
+
up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
writeb(up->interrupt_mask1, &up->regs->w.imr1);
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index a85db8b..02df394 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -703,6 +703,8 @@
} else {
struct circ_buf *xmit = &port->state->xmit;
+ if (uart_circ_empty(xmit))
+ return;
writeb(xmit->buf[xmit->tail], &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 762e4a5..330df5c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -153,6 +153,7 @@
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 115662c1..8a3813b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -720,7 +720,8 @@
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
- { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+ { USB_DEVICE(TESTO_VID, TESTO_1_PID) },
+ { USB_DEVICE(TESTO_VID, TESTO_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
@@ -944,6 +945,8 @@
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
+ /* Infineon Devices */
+ { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 500474c..c4777bc 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -584,6 +584,12 @@
#define RATOC_PRODUCT_ID_USB60F 0xb020
/*
+ * Infineon Technologies
+ */
+#define INFINEON_VID 0x058b
+#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+
+/*
* Acton Research Corp.
*/
#define ACTON_VID 0x0647 /* Vendor ID */
@@ -798,7 +804,8 @@
* Submitted by Colin Leroy
*/
#define TESTO_VID 0x128D
-#define TESTO_USB_INTERFACE_PID 0x0001
+#define TESTO_1_PID 0x0001
+#define TESTO_3_PID 0x0003
/*
* Mobility Electronics products.
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ac73f49..a968894 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1487,6 +1487,8 @@
.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */
.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },
diff --git a/firmware/Makefile b/firmware/Makefile
index 5747417..0862d34 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -219,6 +219,12 @@
obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
+ifeq ($(KBUILD_SRC),)
+# Makefile.build only creates subdirectories for O= builds, but external
+# firmware might live outside the kernel source tree
+_dummy := $(foreach d,$(addprefix $(obj)/,$(dir $(fw-external-y))), $(shell [ -d $(d) ] || mkdir -p $(d)))
+endif
+
# Remove .S files and binaries created from ihex
# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c
index 3f5c188..0b7e28e 100644
--- a/fs/ext4/extents_status.c
+++ b/fs/ext4/extents_status.c
@@ -966,10 +966,10 @@
continue;
}
- if (ei->i_es_lru_nr == 0 || ei == locked_ei)
+ if (ei->i_es_lru_nr == 0 || ei == locked_ei ||
+ !write_trylock(&ei->i_es_lock))
continue;
- write_lock(&ei->i_es_lock);
shrunk = __es_try_to_reclaim_extents(ei, nr_to_scan);
if (ei->i_es_lru_nr == 0)
list_del_init(&ei->i_es_lru);
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index a87455d..5b87fc3 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -338,7 +338,7 @@
fatal = err;
} else {
ext4_error(sb, "bit already cleared for inode %lu", ino);
- if (!EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) {
+ if (gdp && !EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) {
int count;
count = ext4_free_inodes_count(sb, gdp);
percpu_counter_sub(&sbi->s_freeinodes_counter,
@@ -874,6 +874,13 @@
goto out;
}
+ BUFFER_TRACE(group_desc_bh, "get_write_access");
+ err = ext4_journal_get_write_access(handle, group_desc_bh);
+ if (err) {
+ ext4_std_error(sb, err);
+ goto out;
+ }
+
/* We may have to initialize the block bitmap if it isn't already */
if (ext4_has_group_desc_csum(sb) &&
gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
@@ -910,13 +917,6 @@
}
}
- BUFFER_TRACE(group_desc_bh, "get_write_access");
- err = ext4_journal_get_write_access(handle, group_desc_bh);
- if (err) {
- ext4_std_error(sb, err);
- goto out;
- }
-
/* Update the relevant bg descriptor fields */
if (ext4_has_group_desc_csum(sb)) {
int free;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 7f72f50..2dcb936 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -752,8 +752,8 @@
if (free != grp->bb_free) {
ext4_grp_locked_error(sb, group, 0, 0,
- "%u clusters in bitmap, %u in gd; "
- "block bitmap corrupt.",
+ "block bitmap and bg descriptor "
+ "inconsistent: %u vs %u free clusters",
free, grp->bb_free);
/*
* If we intend to continue, we consider group descriptor
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index b9b9aab..6df7bc6 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1525,8 +1525,6 @@
arg = JBD2_DEFAULT_MAX_COMMIT_AGE;
sbi->s_commit_interval = HZ * arg;
} else if (token == Opt_max_batch_time) {
- if (arg == 0)
- arg = EXT4_DEF_MAX_BATCH_TIME;
sbi->s_max_batch_time = arg;
} else if (token == Opt_min_batch_time) {
sbi->s_min_batch_time = arg;
@@ -2809,10 +2807,11 @@
es = sbi->s_es;
if (es->s_error_count)
- ext4_msg(sb, KERN_NOTICE, "error count: %u",
+ /* fsck newer than v1.41.13 is needed to clean this condition. */
+ ext4_msg(sb, KERN_NOTICE, "error count since last fsck: %u",
le32_to_cpu(es->s_error_count));
if (es->s_first_error_time) {
- printk(KERN_NOTICE "EXT4-fs (%s): initial error at %u: %.*s:%d",
+ printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %u: %.*s:%d",
sb->s_id, le32_to_cpu(es->s_first_error_time),
(int) sizeof(es->s_first_error_func),
es->s_first_error_func,
@@ -2826,7 +2825,7 @@
printk("\n");
}
if (es->s_last_error_time) {
- printk(KERN_NOTICE "EXT4-fs (%s): last error at %u: %.*s:%d",
+ printk(KERN_NOTICE "EXT4-fs (%s): last error at time %u: %.*s:%d",
sb->s_id, le32_to_cpu(es->s_last_error_time),
(int) sizeof(es->s_last_error_func),
es->s_last_error_func,
@@ -3880,38 +3879,19 @@
goto failed_mount2;
}
}
-
- /*
- * set up enough so that it can read an inode,
- * and create new inode for buddy allocator
- */
- sbi->s_gdb_count = db_count;
- if (!test_opt(sb, NOLOAD) &&
- EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
- sb->s_op = &ext4_sops;
- else
- sb->s_op = &ext4_nojournal_sops;
-
- ext4_ext_init(sb);
- err = ext4_mb_init(sb);
- if (err) {
- ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
- err);
- goto failed_mount2;
- }
-
if (!ext4_check_descriptors(sb, &first_not_zeroed)) {
ext4_msg(sb, KERN_ERR, "group descriptors corrupted!");
- goto failed_mount2a;
+ goto failed_mount2;
}
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
if (!ext4_fill_flex_info(sb)) {
ext4_msg(sb, KERN_ERR,
"unable to initialize "
"flex_bg meta info!");
- goto failed_mount2a;
+ goto failed_mount2;
}
+ sbi->s_gdb_count = db_count;
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
@@ -3946,6 +3926,14 @@
sbi->s_stripe = ext4_get_stripe_size(sbi);
sbi->s_extent_max_zeroout_kb = 32;
+ /*
+ * set up enough so that it can read an inode
+ */
+ if (!test_opt(sb, NOLOAD) &&
+ EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
+ sb->s_op = &ext4_sops;
+ else
+ sb->s_op = &ext4_nojournal_sops;
sb->s_export_op = &ext4_export_ops;
sb->s_xattr = ext4_xattr_handlers;
#ifdef CONFIG_QUOTA
@@ -4135,13 +4123,21 @@
if (err) {
ext4_msg(sb, KERN_ERR, "failed to reserve %llu clusters for "
"reserved pool", ext4_calculate_resv_clusters(sb));
- goto failed_mount5;
+ goto failed_mount4a;
}
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
"zone (%d)", err);
+ goto failed_mount4a;
+ }
+
+ ext4_ext_init(sb);
+ err = ext4_mb_init(sb);
+ if (err) {
+ ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
+ err);
goto failed_mount5;
}
@@ -4218,8 +4214,11 @@
failed_mount7:
ext4_unregister_li_request(sb);
failed_mount6:
- ext4_release_system_zone(sb);
+ ext4_mb_release(sb);
failed_mount5:
+ ext4_ext_release(sb);
+ ext4_release_system_zone(sb);
+failed_mount4a:
dput(sb->s_root);
sb->s_root = NULL;
failed_mount4:
@@ -4243,14 +4242,11 @@
percpu_counter_destroy(&sbi->s_extent_cache_cnt);
if (sbi->s_mmp_tsk)
kthread_stop(sbi->s_mmp_tsk);
-failed_mount2a:
- ext4_mb_release(sb);
failed_mount2:
for (i = 0; i < db_count; i++)
brelse(sbi->s_group_desc[i]);
ext4_kvfree(sbi->s_group_desc);
failed_mount:
- ext4_ext_release(sb);
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
if (sbi->s_proc) {
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 0924521..f8cf619 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -608,8 +608,8 @@
* b. do not use extent cache for better performance
* c. give the block addresses to blockdev
*/
-static int get_data_block(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create)
+static int __get_data_block(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh_result, int create, bool fiemap)
{
struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb);
unsigned int blkbits = inode->i_sb->s_blocksize_bits;
@@ -637,7 +637,7 @@
err = 0;
goto unlock_out;
}
- if (dn.data_blkaddr == NEW_ADDR)
+ if (dn.data_blkaddr == NEW_ADDR && !fiemap)
goto put_out;
if (dn.data_blkaddr != NULL_ADDR) {
@@ -671,7 +671,7 @@
err = 0;
goto unlock_out;
}
- if (dn.data_blkaddr == NEW_ADDR)
+ if (dn.data_blkaddr == NEW_ADDR && !fiemap)
goto put_out;
end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
@@ -708,10 +708,23 @@
return err;
}
+static int get_data_block(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh_result, int create)
+{
+ return __get_data_block(inode, iblock, bh_result, create, false);
+}
+
+static int get_data_block_fiemap(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh_result, int create)
+{
+ return __get_data_block(inode, iblock, bh_result, create, true);
+}
+
int f2fs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
u64 start, u64 len)
{
- return generic_block_fiemap(inode, fieinfo, start, len, get_data_block);
+ return generic_block_fiemap(inode, fieinfo,
+ start, len, get_data_block_fiemap);
}
static int f2fs_read_data_page(struct file *file, struct page *page)
diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index 966acb0..a4addd7 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -376,11 +376,11 @@
put_error:
f2fs_put_page(page, 1);
+error:
/* once the failed inode becomes a bad inode, i_mode is S_IFREG */
truncate_inode_pages(&inode->i_data, 0);
truncate_blocks(inode, 0);
remove_dirty_dir_inode(inode);
-error:
remove_inode_page(inode);
return ERR_PTR(err);
}
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index e51c732..58df97e 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -342,9 +342,6 @@
struct dirty_seglist_info *dirty_info; /* dirty segment information */
struct curseg_info *curseg_array; /* active segment information */
- struct list_head wblist_head; /* list of under-writeback pages */
- spinlock_t wblist_lock; /* lock for checkpoint */
-
block_t seg0_blkaddr; /* block address of 0'th segment */
block_t main_blkaddr; /* start block address of main area */
block_t ssa_blkaddr; /* start block address of SSA area */
@@ -644,7 +641,8 @@
*/
static inline int check_nid_range(struct f2fs_sb_info *sbi, nid_t nid)
{
- WARN_ON((nid >= NM_I(sbi)->max_nid));
+ if (unlikely(nid < F2FS_ROOT_INO(sbi)))
+ return -EINVAL;
if (unlikely(nid >= NM_I(sbi)->max_nid))
return -EINVAL;
return 0;
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index c58e330..7d8b962 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -659,16 +659,19 @@
off_start = offset & (PAGE_CACHE_SIZE - 1);
off_end = (offset + len) & (PAGE_CACHE_SIZE - 1);
+ f2fs_lock_op(sbi);
+
for (index = pg_start; index <= pg_end; index++) {
struct dnode_of_data dn;
- f2fs_lock_op(sbi);
+ if (index == pg_end && !off_end)
+ goto noalloc;
+
set_new_dnode(&dn, inode, NULL, NULL, 0);
ret = f2fs_reserve_block(&dn, index);
- f2fs_unlock_op(sbi);
if (ret)
break;
-
+noalloc:
if (pg_start == pg_end)
new_size = offset + len;
else if (index == pg_start && off_start)
@@ -683,8 +686,9 @@
i_size_read(inode) < new_size) {
i_size_write(inode, new_size);
mark_inode_dirty(inode);
- f2fs_write_inode(inode, NULL);
+ update_inode_page(inode);
}
+ f2fs_unlock_op(sbi);
return ret;
}
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index adc622c..2cf6962 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -78,6 +78,7 @@
if (check_nid_range(sbi, inode->i_ino)) {
f2fs_msg(inode->i_sb, KERN_ERR, "bad inode number: %lu",
(unsigned long) inode->i_ino);
+ WARN_ON(1);
return -EINVAL;
}
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 9138c32..a6bdddc 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -417,9 +417,6 @@
}
f2fs_set_link(new_dir, new_entry, new_page, old_inode);
- down_write(&F2FS_I(old_inode)->i_sem);
- F2FS_I(old_inode)->i_pino = new_dir->i_ino;
- up_write(&F2FS_I(old_inode)->i_sem);
new_inode->i_ctime = CURRENT_TIME;
down_write(&F2FS_I(new_inode)->i_sem);
@@ -448,6 +445,10 @@
}
}
+ down_write(&F2FS_I(old_inode)->i_sem);
+ file_lost_pino(old_inode);
+ up_write(&F2FS_I(old_inode)->i_sem);
+
old_inode->i_ctime = CURRENT_TIME;
mark_inode_dirty(old_inode);
@@ -457,9 +458,6 @@
if (old_dir != new_dir) {
f2fs_set_link(old_inode, old_dir_entry,
old_dir_page, new_dir);
- down_write(&F2FS_I(old_inode)->i_sem);
- F2FS_I(old_inode)->i_pino = new_dir->i_ino;
- up_write(&F2FS_I(old_inode)->i_sem);
update_inode_page(old_inode);
} else {
kunmap(old_dir_page);
@@ -474,7 +472,8 @@
return 0;
put_out_dir:
- f2fs_put_page(new_page, 1);
+ kunmap(new_page);
+ f2fs_put_page(new_page, 0);
out_dir:
if (old_dir_entry) {
kunmap(old_dir_page);
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 9dfb9a0..4b697cc 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -42,6 +42,8 @@
mem_size = (nm_i->nat_cnt * sizeof(struct nat_entry)) >> 12;
res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 2);
} else if (type == DIRTY_DENTS) {
+ if (sbi->sb->s_bdi->dirty_exceeded)
+ return false;
mem_size = get_pages(sbi, F2FS_DIRTY_DENTS);
res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 1);
}
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index f25f0e0..d04613d 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -272,14 +272,15 @@
return -ENOMEM;
spin_lock_init(&fcc->issue_lock);
init_waitqueue_head(&fcc->flush_wait_queue);
+ sbi->sm_info->cmd_control_info = fcc;
fcc->f2fs_issue_flush = kthread_run(issue_flush_thread, sbi,
"f2fs_flush-%u:%u", MAJOR(dev), MINOR(dev));
if (IS_ERR(fcc->f2fs_issue_flush)) {
err = PTR_ERR(fcc->f2fs_issue_flush);
kfree(fcc);
+ sbi->sm_info->cmd_control_info = NULL;
return err;
}
- sbi->sm_info->cmd_control_info = fcc;
return err;
}
@@ -1885,8 +1886,6 @@
/* init sm info */
sbi->sm_info = sm_info;
- INIT_LIST_HEAD(&sm_info->wblist_head);
- spin_lock_init(&sm_info->wblist_lock);
sm_info->seg0_blkaddr = le32_to_cpu(raw_super->segment0_blkaddr);
sm_info->main_blkaddr = le32_to_cpu(raw_super->main_blkaddr);
sm_info->segment_count = le32_to_cpu(raw_super->segment_count);
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index b2b1863..8f96d93 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -689,9 +689,7 @@
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct inode *inode;
- if (unlikely(ino < F2FS_ROOT_INO(sbi)))
- return ERR_PTR(-ESTALE);
- if (unlikely(ino >= NM_I(sbi)->max_nid))
+ if (check_nid_range(sbi, ino))
return ERR_PTR(-ESTALE);
/*
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 38cfcf5..6f0f590 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1588,9 +1588,12 @@
* to perform a synchronous write. We do this to detect the
* case where a single process is doing a stream of sync
* writes. No point in waiting for joiners in that case.
+ *
+ * Setting max_batch_time to 0 disables this completely.
*/
pid = current->pid;
- if (handle->h_sync && journal->j_last_sync_writer != pid) {
+ if (handle->h_sync && journal->j_last_sync_writer != pid &&
+ journal->j_max_batch_time) {
u64 commit_time, trans_time;
journal->j_last_sync_writer = pid;
diff --git a/fs/kernfs/mount.c b/fs/kernfs/mount.c
index d171b98..f973ae9 100644
--- a/fs/kernfs/mount.c
+++ b/fs/kernfs/mount.c
@@ -211,6 +211,36 @@
kernfs_put(root_kn);
}
+/**
+ * kernfs_pin_sb: try to pin the superblock associated with a kernfs_root
+ * @kernfs_root: the kernfs_root in question
+ * @ns: the namespace tag
+ *
+ * Pin the superblock so the superblock won't be destroyed in subsequent
+ * operations. This can be used to block ->kill_sb() which may be useful
+ * for kernfs users which dynamically manage superblocks.
+ *
+ * Returns NULL if there's no superblock associated to this kernfs_root, or
+ * -EINVAL if the superblock is being freed.
+ */
+struct super_block *kernfs_pin_sb(struct kernfs_root *root, const void *ns)
+{
+ struct kernfs_super_info *info;
+ struct super_block *sb = NULL;
+
+ mutex_lock(&kernfs_mutex);
+ list_for_each_entry(info, &root->supers, node) {
+ if (info->ns == ns) {
+ sb = info->sb;
+ if (!atomic_inc_not_zero(&info->sb->s_active))
+ sb = ERR_PTR(-EINVAL);
+ break;
+ }
+ }
+ mutex_unlock(&kernfs_mutex);
+ return sb;
+}
+
void __init kernfs_init(void)
{
kernfs_node_cache = kmem_cache_create("kernfs_node_cache",
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 2fc7abe..b56b1cc0 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2641,7 +2641,7 @@
{
__be32 *p;
- p = xdr_reserve_space(xdr, 6);
+ p = xdr_reserve_space(xdr, 20);
if (!p)
return NULL;
*p++ = htonl(2);
diff --git a/include/acpi/video.h b/include/acpi/video.h
index ea4c7bb..843ef1a 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -22,6 +22,7 @@
extern void acpi_video_unregister_backlight(void);
extern int acpi_video_get_edid(struct acpi_device *device, int type,
int device_id, void **edid);
+extern bool acpi_video_verify_backlight_support(void);
#else
static inline int acpi_video_register(void) { return 0; }
static inline void acpi_video_unregister(void) { return; }
@@ -31,6 +32,7 @@
{
return -ENODEV;
}
+static inline bool acpi_video_verify_backlight_support(void) { return false; }
#endif
#endif
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 471ba48..c1c0b0c 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -693,7 +693,7 @@
. = ALIGN(PAGE_SIZE); \
*(.data..percpu..page_aligned) \
. = ALIGN(cacheline); \
- *(.data..percpu..readmostly) \
+ *(.data..percpu..read_mostly) \
. = ALIGN(cacheline); \
*(.data..percpu) \
*(.data..percpu..shared_aligned) \
diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 97dcb89..21d51ae 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -63,7 +63,6 @@
#define CLK_SCLK_MPHY_IXTAL24 161
/* gate clocks */
-#define CLK_ACLK66_PERIC 256
#define CLK_UART0 257
#define CLK_UART1 258
#define CLK_UART2 259
@@ -203,6 +202,8 @@
#define CLK_MOUT_G3D 641
#define CLK_MOUT_VPLL 642
#define CLK_MOUT_MAUDIO0 643
+#define CLK_MOUT_USER_ACLK333 644
+#define CLK_MOUT_SW_ACLK333 645
/* divider clocks */
#define CLK_DOUT_PIXEL 768
diff --git a/include/linux/kernfs.h b/include/linux/kernfs.h
index 145375e..30faf79 100644
--- a/include/linux/kernfs.h
+++ b/include/linux/kernfs.h
@@ -305,6 +305,7 @@
struct kernfs_root *root, unsigned long magic,
bool *new_sb_created, const void *ns);
void kernfs_kill_sb(struct super_block *sb);
+struct super_block *kernfs_pin_sb(struct kernfs_root *root, const void *ns);
void kernfs_init(void);
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index a5fc7d0..dec01d6 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -146,10 +146,10 @@
* Declaration/definition used for per-CPU variables that must be read mostly.
*/
#define DECLARE_PER_CPU_READ_MOSTLY(type, name) \
- DECLARE_PER_CPU_SECTION(type, name, "..readmostly")
+ DECLARE_PER_CPU_SECTION(type, name, "..read_mostly")
#define DEFINE_PER_CPU_READ_MOSTLY(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, "..readmostly")
+ DEFINE_PER_CPU_SECTION(type, name, "..read_mostly")
/*
* Intermodule exports for per-CPU variables. sparse forgets about
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 7868fc3..70776ae 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1648,10 +1648,13 @@
int flags, const char *unused_dev_name,
void *data)
{
+ struct super_block *pinned_sb = NULL;
+ struct cgroup_subsys *ss;
struct cgroup_root *root;
struct cgroup_sb_opts opts;
struct dentry *dentry;
int ret;
+ int i;
bool new_sb;
/*
@@ -1677,6 +1680,27 @@
goto out_unlock;
}
+ /*
+ * Destruction of cgroup root is asynchronous, so subsystems may
+ * still be dying after the previous unmount. Let's drain the
+ * dying subsystems. We just need to ensure that the ones
+ * unmounted previously finish dying and don't care about new ones
+ * starting. Testing ref liveliness is good enough.
+ */
+ for_each_subsys(ss, i) {
+ if (!(opts.subsys_mask & (1 << i)) ||
+ ss->root == &cgrp_dfl_root)
+ continue;
+
+ if (!percpu_ref_tryget_live(&ss->root->cgrp.self.refcnt)) {
+ mutex_unlock(&cgroup_mutex);
+ msleep(10);
+ ret = restart_syscall();
+ goto out_free;
+ }
+ cgroup_put(&ss->root->cgrp);
+ }
+
for_each_root(root) {
bool name_match = false;
@@ -1717,15 +1741,23 @@
}
/*
- * A root's lifetime is governed by its root cgroup.
- * tryget_live failure indicate that the root is being
- * destroyed. Wait for destruction to complete so that the
- * subsystems are free. We can use wait_queue for the wait
- * but this path is super cold. Let's just sleep for a bit
- * and retry.
+ * We want to reuse @root whose lifetime is governed by its
+ * ->cgrp. Let's check whether @root is alive and keep it
+ * that way. As cgroup_kill_sb() can happen anytime, we
+ * want to block it by pinning the sb so that @root doesn't
+ * get killed before mount is complete.
+ *
+ * With the sb pinned, tryget_live can reliably indicate
+ * whether @root can be reused. If it's being killed,
+ * drain it. We can use wait_queue for the wait but this
+ * path is super cold. Let's just sleep a bit and retry.
*/
- if (!percpu_ref_tryget_live(&root->cgrp.self.refcnt)) {
+ pinned_sb = kernfs_pin_sb(root->kf_root, NULL);
+ if (IS_ERR(pinned_sb) ||
+ !percpu_ref_tryget_live(&root->cgrp.self.refcnt)) {
mutex_unlock(&cgroup_mutex);
+ if (!IS_ERR_OR_NULL(pinned_sb))
+ deactivate_super(pinned_sb);
msleep(10);
ret = restart_syscall();
goto out_free;
@@ -1770,6 +1802,16 @@
CGROUP_SUPER_MAGIC, &new_sb);
if (IS_ERR(dentry) || !new_sb)
cgroup_put(&root->cgrp);
+
+ /*
+ * If @pinned_sb, we're reusing an existing root and holding an
+ * extra ref on its sb. Mount is complete. Put the extra ref.
+ */
+ if (pinned_sb) {
+ WARN_ON(new_sb);
+ deactivate_super(pinned_sb);
+ }
+
return dentry;
}
@@ -3328,7 +3370,7 @@
rcu_read_lock();
css_for_each_child(child, css) {
- if (css->flags & CSS_ONLINE) {
+ if (child->flags & CSS_ONLINE) {
ret = true;
break;
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index f6b33c6..116a416 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -1181,7 +1181,13 @@
int current_cpuset_is_being_rebound(void)
{
- return task_cs(current) == cpuset_being_rebound;
+ int ret;
+
+ rcu_read_lock();
+ ret = task_cs(current) == cpuset_being_rebound;
+ rcu_read_unlock();
+
+ return ret;
}
static int update_relax_domain_level(struct cpuset *cs, s64 val)
@@ -1617,7 +1623,17 @@
* resources, wait for the previously scheduled operations before
* proceeding, so that we don't end up keep removing tasks added
* after execution capability is restored.
+ *
+ * cpuset_hotplug_work calls back into cgroup core via
+ * cgroup_transfer_tasks() and waiting for it from a cgroupfs
+ * operation like this one can lead to a deadlock through kernfs
+ * active_ref protection. Let's break the protection. Losing the
+ * protection is okay as we check whether @cs is online after
+ * grabbing cpuset_mutex anyway. This only happens on the legacy
+ * hierarchies.
*/
+ css_get(&cs->css);
+ kernfs_break_active_protection(of->kn);
flush_work(&cpuset_hotplug_work);
mutex_lock(&cpuset_mutex);
@@ -1645,6 +1661,8 @@
free_trial_cpuset(trialcs);
out_unlock:
mutex_unlock(&cpuset_mutex);
+ kernfs_unbreak_active_protection(of->kn);
+ css_put(&cs->css);
return retval ?: nbytes;
}
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 6203d29..35974ac 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3284,6 +3284,7 @@
}
}
+ dev_set_uevent_suppress(&wq_dev->dev, false);
kobject_uevent(&wq_dev->dev.kobj, KOBJ_ADD);
return 0;
}
@@ -4879,7 +4880,7 @@
BUG_ON(!tbl);
for_each_node(node)
- BUG_ON(!alloc_cpumask_var_node(&tbl[node], GFP_KERNEL,
+ BUG_ON(!zalloc_cpumask_var_node(&tbl[node], GFP_KERNEL,
node_online(node) ? node : NUMA_NO_NODE));
for_each_possible_cpu(cpu) {
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index eb58de1..8f5330d 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2139,7 +2139,6 @@
} else
*new = *old;
- rcu_read_lock();
if (current_cpuset_is_being_rebound()) {
nodemask_t mems = cpuset_mems_allowed(current);
if (new->flags & MPOL_F_REBINDING)
@@ -2147,7 +2146,6 @@
else
mpol_rebind_policy(new, &mems, MPOL_REBIND_ONCE);
}
- rcu_read_unlock();
atomic_set(&new->refcnt, 1);
return new;
}
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index da058da..16a07cf 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2073,6 +2073,7 @@
sub dump_function($$) {
my $prototype = shift;
my $file = shift;
+ my $noret = 0;
$prototype =~ s/^static +//;
$prototype =~ s/^extern +//;
@@ -2086,7 +2087,7 @@
$prototype =~ s/__init_or_module +//;
$prototype =~ s/__must_check +//;
$prototype =~ s/__weak +//;
- $prototype =~ s/^#\s*define\s+//; #ak added
+ my $define = $prototype =~ s/^#\s*define\s+//; #ak added
$prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
# Yes, this truly is vile. We are looking for:
@@ -2105,7 +2106,15 @@
# - atomic_set (macro)
# - pci_match_device, __copy_to_user (long return type)
- if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
+ if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) {
+ # This is an object-like macro, it has no return type and no parameter
+ # list.
+ # Function-like macros are not allowed to have spaces between
+ # declaration_name and opening parenthesis (notice the \s+).
+ $return_type = $1;
+ $declaration_name = $2;
+ $noret = 1;
+ } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
@@ -2140,7 +2149,7 @@
# of warnings goes sufficiently down, the check is only performed in
# verbose mode.
# TODO: always perform the check.
- if ($verbose) {
+ if ($verbose && !$noret) {
check_return_section($file, $declaration_name, $return_type);
}
diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c
index 0849b7b..0db94f49 100644
--- a/sound/soc/fsl/imx-pcm-dma.c
+++ b/sound/soc/fsl/imx-pcm-dma.c
@@ -59,7 +59,6 @@
{
return devm_snd_dmaengine_pcm_register(&pdev->dev,
&imx_dmaengine_pcm_config,
- SND_DMAENGINE_PCM_FLAG_NO_RESIDUE |
SND_DMAENGINE_PCM_FLAG_COMPAT);
}
EXPORT_SYMBOL_GPL(imx_pcm_dma_init);
diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile
index 4473211..e775adc 100644
--- a/tools/thermal/tmon/Makefile
+++ b/tools/thermal/tmon/Makefile
@@ -21,7 +21,7 @@
OBJS +=
tmon: $(OBJS) Makefile tmon.h
- $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -lpthread
+ $(CC) ${CFLAGS} $(LDFLAGS) $(OBJS) -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread
valgrind: tmon
sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET) 1> /dev/null
diff --git a/tools/thermal/tmon/tmon.c b/tools/thermal/tmon/tmon.c
index b30f531..09b7c32 100644
--- a/tools/thermal/tmon/tmon.c
+++ b/tools/thermal/tmon/tmon.c
@@ -142,6 +142,7 @@
static void prepare_logging(void)
{
int i;
+ struct stat logstat;
if (!logging)
return;
@@ -152,6 +153,29 @@
return;
}
+ if (lstat(TMON_LOG_FILE, &logstat) < 0) {
+ syslog(LOG_ERR, "Unable to stat log file %s\n", TMON_LOG_FILE);
+ fclose(tmon_log);
+ tmon_log = NULL;
+ return;
+ }
+
+ /* The log file must be a regular file owned by us */
+ if (S_ISLNK(logstat.st_mode)) {
+ syslog(LOG_ERR, "Log file is a symlink. Will not log\n");
+ fclose(tmon_log);
+ tmon_log = NULL;
+ return;
+ }
+
+ if (logstat.st_uid != getuid()) {
+ syslog(LOG_ERR, "We don't own the log file. Not logging\n");
+ fclose(tmon_log);
+ tmon_log = NULL;
+ return;
+ }
+
+
fprintf(tmon_log, "#----------- THERMAL SYSTEM CONFIG -------------\n");
for (i = 0; i < ptdata.nr_tz_sensor; i++) {
char binding_str[33]; /* size of long + 1 */
@@ -331,7 +355,7 @@
disable_tui();
/* change the file mode mask */
- umask(0);
+ umask(S_IWGRP | S_IWOTH);
/* new SID for the daemon process */
sid = setsid();
