|  | /** | 
|  | * Functions implementing wlan scan IOCTL and firmware command APIs | 
|  | * | 
|  | * IOCTL handlers as well as command preperation and response routines | 
|  | *  for sending scan commands to the firmware. | 
|  | */ | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/if.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <linux/etherdevice.h> | 
|  |  | 
|  | #include <net/ieee80211.h> | 
|  | #include <net/iw_handler.h> | 
|  |  | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include "host.h" | 
|  | #include "decl.h" | 
|  | #include "dev.h" | 
|  | #include "scan.h" | 
|  | #include "join.h" | 
|  |  | 
|  | //! Approximate amount of data needed to pass a scan result back to iwlist | 
|  | #define MAX_SCAN_CELL_SIZE  (IW_EV_ADDR_LEN             \ | 
|  | + IW_ESSID_MAX_SIZE        \ | 
|  | + IW_EV_UINT_LEN           \ | 
|  | + IW_EV_FREQ_LEN           \ | 
|  | + IW_EV_QUAL_LEN           \ | 
|  | + IW_ESSID_MAX_SIZE        \ | 
|  | + IW_EV_PARAM_LEN          \ | 
|  | + 40)	/* 40 for WPAIE */ | 
|  |  | 
|  | //! Memory needed to store a max sized channel List TLV for a firmware scan | 
|  | #define CHAN_TLV_MAX_SIZE  (sizeof(struct mrvlietypesheader)    \ | 
|  | + (MRVDRV_MAX_CHANNELS_PER_SCAN     \ | 
|  | * sizeof(struct chanscanparamset))) | 
|  |  | 
|  | //! Memory needed to store a max number/size SSID TLV for a firmware scan | 
|  | #define SSID_TLV_MAX_SIZE  (1 * sizeof(struct mrvlietypes_ssidparamset)) | 
|  |  | 
|  | //! Maximum memory needed for a lbs_scan_cmd_config with all TLVs at max | 
|  | #define MAX_SCAN_CFG_ALLOC (sizeof(struct lbs_scan_cmd_config)  \ | 
|  | + CHAN_TLV_MAX_SIZE                 \ | 
|  | + SSID_TLV_MAX_SIZE) | 
|  |  | 
|  | //! The maximum number of channels the firmware can scan per command | 
|  | #define MRVDRV_MAX_CHANNELS_PER_SCAN   14 | 
|  |  | 
|  | /** | 
|  | * @brief Number of channels to scan per firmware scan command issuance. | 
|  | * | 
|  | *  Number restricted to prevent hitting the limit on the amount of scan data | 
|  | *  returned in a single firmware scan command. | 
|  | */ | 
|  | #define MRVDRV_CHANNELS_PER_SCAN_CMD   4 | 
|  |  | 
|  | //! Scan time specified in the channel TLV for each channel for passive scans | 
|  | #define MRVDRV_PASSIVE_SCAN_CHAN_TIME  100 | 
|  |  | 
|  | //! Scan time specified in the channel TLV for each channel for active scans | 
|  | #define MRVDRV_ACTIVE_SCAN_CHAN_TIME   100 | 
|  |  | 
|  | static const u8 zeromac[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; | 
|  | static const u8 bcastmac[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | /*********************************************************************/ | 
|  | /*                                                                   */ | 
|  | /*  Misc helper functions                                            */ | 
|  | /*                                                                   */ | 
|  | /*********************************************************************/ | 
|  |  | 
|  | static inline void clear_bss_descriptor (struct bss_descriptor * bss) | 
|  | { | 
|  | /* Don't blow away ->list, just BSS data */ | 
|  | memset(bss, 0, offsetof(struct bss_descriptor, list)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief Compare two SSIDs | 
|  | * | 
|  | *  @param ssid1    A pointer to ssid to compare | 
|  | *  @param ssid2    A pointer to ssid to compare | 
|  | * | 
|  | *  @return         0: ssid is same, otherwise is different | 
|  | */ | 
|  | int lbs_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len) | 
|  | { | 
|  | if (ssid1_len != ssid2_len) | 
|  | return -1; | 
|  |  | 
|  | return memcmp(ssid1, ssid2, ssid1_len); | 
|  | } | 
|  |  | 
|  | static inline int match_bss_no_security(struct lbs_802_11_security *secinfo, | 
|  | struct bss_descriptor * match_bss) | 
|  | { | 
|  | if (   !secinfo->wep_enabled | 
|  | && !secinfo->WPAenabled | 
|  | && !secinfo->WPA2enabled | 
|  | && match_bss->wpa_ie[0] != MFIE_TYPE_GENERIC | 
|  | && match_bss->rsn_ie[0] != MFIE_TYPE_RSN | 
|  | && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo, | 
|  | struct bss_descriptor * match_bss) | 
|  | { | 
|  | if ( secinfo->wep_enabled | 
|  | && !secinfo->WPAenabled | 
|  | && !secinfo->WPA2enabled | 
|  | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int match_bss_wpa(struct lbs_802_11_security *secinfo, | 
|  | struct bss_descriptor * match_bss) | 
|  | { | 
|  | if (  !secinfo->wep_enabled | 
|  | && secinfo->WPAenabled | 
|  | && (match_bss->wpa_ie[0] == MFIE_TYPE_GENERIC) | 
|  | /* privacy bit may NOT be set in some APs like LinkSys WRT54G | 
|  | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { | 
|  | */ | 
|  | ) { | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int match_bss_wpa2(struct lbs_802_11_security *secinfo, | 
|  | struct bss_descriptor * match_bss) | 
|  | { | 
|  | if (  !secinfo->wep_enabled | 
|  | && secinfo->WPA2enabled | 
|  | && (match_bss->rsn_ie[0] == MFIE_TYPE_RSN) | 
|  | /* privacy bit may NOT be set in some APs like LinkSys WRT54G | 
|  | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { | 
|  | */ | 
|  | ) { | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int match_bss_dynamic_wep(struct lbs_802_11_security *secinfo, | 
|  | struct bss_descriptor * match_bss) | 
|  | { | 
|  | if (  !secinfo->wep_enabled | 
|  | && !secinfo->WPAenabled | 
|  | && !secinfo->WPA2enabled | 
|  | && (match_bss->wpa_ie[0] != MFIE_TYPE_GENERIC) | 
|  | && (match_bss->rsn_ie[0] != MFIE_TYPE_RSN) | 
|  | && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int is_same_network(struct bss_descriptor *src, | 
|  | struct bss_descriptor *dst) | 
|  | { | 
|  | /* A network is only a duplicate if the channel, BSSID, and ESSID | 
|  | * all match.  We treat all <hidden> with the same BSSID and channel | 
|  | * as one network */ | 
|  | return ((src->ssid_len == dst->ssid_len) && | 
|  | (src->channel == dst->channel) && | 
|  | !compare_ether_addr(src->bssid, dst->bssid) && | 
|  | !memcmp(src->ssid, dst->ssid, src->ssid_len)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief Check if a scanned network compatible with the driver settings | 
|  | * | 
|  | *   WEP     WPA     WPA2    ad-hoc  encrypt                      Network | 
|  | * enabled enabled  enabled   AES     mode   privacy  WPA  WPA2  Compatible | 
|  | *    0       0        0       0      NONE      0      0    0   yes No security | 
|  | *    1       0        0       0      NONE      1      0    0   yes Static WEP | 
|  | *    0       1        0       0       x        1x     1    x   yes WPA | 
|  | *    0       0        1       0       x        1x     x    1   yes WPA2 | 
|  | *    0       0        0       1      NONE      1      0    0   yes Ad-hoc AES | 
|  | *    0       0        0       0     !=NONE     1      0    0   yes Dynamic WEP | 
|  | * | 
|  | * | 
|  | *  @param priv A pointer to struct lbs_private | 
|  | *  @param index   Index in scantable to check against current driver settings | 
|  | *  @param mode    Network mode: Infrastructure or IBSS | 
|  | * | 
|  | *  @return        Index in scantable, or error code if negative | 
|  | */ | 
|  | static int is_network_compatible(struct lbs_private *priv, | 
|  | struct bss_descriptor * bss, u8 mode) | 
|  | { | 
|  | int matched = 0; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | if (bss->mode != mode) | 
|  | goto done; | 
|  |  | 
|  | if ((matched = match_bss_no_security(&priv->secinfo, bss))) { | 
|  | goto done; | 
|  | } else if ((matched = match_bss_static_wep(&priv->secinfo, bss))) { | 
|  | goto done; | 
|  | } else if ((matched = match_bss_wpa(&priv->secinfo, bss))) { | 
|  | lbs_deb_scan( | 
|  | "is_network_compatible() WPA: wpa_ie 0x%x " | 
|  | "wpa2_ie 0x%x WEP %s WPA %s WPA2 %s " | 
|  | "privacy 0x%x\n", bss->wpa_ie[0], bss->rsn_ie[0], | 
|  | priv->secinfo.wep_enabled ? "e" : "d", | 
|  | priv->secinfo.WPAenabled ? "e" : "d", | 
|  | priv->secinfo.WPA2enabled ? "e" : "d", | 
|  | (bss->capability & WLAN_CAPABILITY_PRIVACY)); | 
|  | goto done; | 
|  | } else if ((matched = match_bss_wpa2(&priv->secinfo, bss))) { | 
|  | lbs_deb_scan( | 
|  | "is_network_compatible() WPA2: wpa_ie 0x%x " | 
|  | "wpa2_ie 0x%x WEP %s WPA %s WPA2 %s " | 
|  | "privacy 0x%x\n", bss->wpa_ie[0], bss->rsn_ie[0], | 
|  | priv->secinfo.wep_enabled ? "e" : "d", | 
|  | priv->secinfo.WPAenabled ? "e" : "d", | 
|  | priv->secinfo.WPA2enabled ? "e" : "d", | 
|  | (bss->capability & WLAN_CAPABILITY_PRIVACY)); | 
|  | goto done; | 
|  | } else if ((matched = match_bss_dynamic_wep(&priv->secinfo, bss))) { | 
|  | lbs_deb_scan( | 
|  | "is_network_compatible() dynamic WEP: " | 
|  | "wpa_ie 0x%x wpa2_ie 0x%x privacy 0x%x\n", | 
|  | bss->wpa_ie[0], bss->rsn_ie[0], | 
|  | (bss->capability & WLAN_CAPABILITY_PRIVACY)); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* bss security settings don't match those configured on card */ | 
|  | lbs_deb_scan( | 
|  | "is_network_compatible() FAILED: wpa_ie 0x%x " | 
|  | "wpa2_ie 0x%x WEP %s WPA %s WPA2 %s privacy 0x%x\n", | 
|  | bss->wpa_ie[0], bss->rsn_ie[0], | 
|  | priv->secinfo.wep_enabled ? "e" : "d", | 
|  | priv->secinfo.WPAenabled ? "e" : "d", | 
|  | priv->secinfo.WPA2enabled ? "e" : "d", | 
|  | (bss->capability & WLAN_CAPABILITY_PRIVACY)); | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "matched: %d", matched); | 
|  | return matched; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | /*********************************************************************/ | 
|  | /*                                                                   */ | 
|  | /*  Main scanning support                                            */ | 
|  | /*                                                                   */ | 
|  | /*********************************************************************/ | 
|  |  | 
|  | void lbs_scan_worker(struct work_struct *work) | 
|  | { | 
|  | struct lbs_private *priv = | 
|  | container_of(work, struct lbs_private, scan_work.work); | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  | lbs_scan_networks(priv, NULL, 0); | 
|  | lbs_deb_leave(LBS_DEB_SCAN); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  @brief Create a channel list for the driver to scan based on region info | 
|  | * | 
|  | *  Only used from lbs_scan_setup_scan_config() | 
|  | * | 
|  | *  Use the driver region/band information to construct a comprehensive list | 
|  | *    of channels to scan.  This routine is used for any scan that is not | 
|  | *    provided a specific channel list to scan. | 
|  | * | 
|  | *  @param priv          A pointer to struct lbs_private structure | 
|  | *  @param scanchanlist  Output parameter: resulting channel list to scan | 
|  | *  @param filteredscan  Flag indicating whether or not a BSSID or SSID filter | 
|  | *                       is being sent in the command to firmware.  Used to | 
|  | *                       increase the number of channels sent in a scan | 
|  | *                       command and to disable the firmware channel scan | 
|  | *                       filter. | 
|  | * | 
|  | *  @return              void | 
|  | */ | 
|  | static int lbs_scan_create_channel_list(struct lbs_private *priv, | 
|  | struct chanscanparamset * scanchanlist, | 
|  | u8 filteredscan) | 
|  | { | 
|  |  | 
|  | struct region_channel *scanregion; | 
|  | struct chan_freq_power *cfp; | 
|  | int rgnidx; | 
|  | int chanidx; | 
|  | int nextchan; | 
|  | u8 scantype; | 
|  |  | 
|  | chanidx = 0; | 
|  |  | 
|  | /* Set the default scan type to the user specified type, will later | 
|  | *   be changed to passive on a per channel basis if restricted by | 
|  | *   regulatory requirements (11d or 11h) | 
|  | */ | 
|  | scantype = CMD_SCAN_TYPE_ACTIVE; | 
|  |  | 
|  | for (rgnidx = 0; rgnidx < ARRAY_SIZE(priv->region_channel); rgnidx++) { | 
|  | if (priv->enable11d && | 
|  | (priv->connect_status != LBS_CONNECTED) && | 
|  | (priv->mesh_connect_status != LBS_CONNECTED)) { | 
|  | /* Scan all the supported chan for the first scan */ | 
|  | if (!priv->universal_channel[rgnidx].valid) | 
|  | continue; | 
|  | scanregion = &priv->universal_channel[rgnidx]; | 
|  |  | 
|  | /* clear the parsed_region_chan for the first scan */ | 
|  | memset(&priv->parsed_region_chan, 0x00, | 
|  | sizeof(priv->parsed_region_chan)); | 
|  | } else { | 
|  | if (!priv->region_channel[rgnidx].valid) | 
|  | continue; | 
|  | scanregion = &priv->region_channel[rgnidx]; | 
|  | } | 
|  |  | 
|  | for (nextchan = 0; | 
|  | nextchan < scanregion->nrcfp; nextchan++, chanidx++) { | 
|  |  | 
|  | cfp = scanregion->CFP + nextchan; | 
|  |  | 
|  | if (priv->enable11d) { | 
|  | scantype = | 
|  | lbs_get_scan_type_11d(cfp->channel, | 
|  | &priv-> | 
|  | parsed_region_chan); | 
|  | } | 
|  |  | 
|  | switch (scanregion->band) { | 
|  | case BAND_B: | 
|  | case BAND_G: | 
|  | default: | 
|  | scanchanlist[chanidx].radiotype = | 
|  | CMD_SCAN_RADIO_TYPE_BG; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (scantype == CMD_SCAN_TYPE_PASSIVE) { | 
|  | scanchanlist[chanidx].maxscantime = | 
|  | cpu_to_le16(MRVDRV_PASSIVE_SCAN_CHAN_TIME); | 
|  | scanchanlist[chanidx].chanscanmode.passivescan = | 
|  | 1; | 
|  | } else { | 
|  | scanchanlist[chanidx].maxscantime = | 
|  | cpu_to_le16(MRVDRV_ACTIVE_SCAN_CHAN_TIME); | 
|  | scanchanlist[chanidx].chanscanmode.passivescan = | 
|  | 0; | 
|  | } | 
|  |  | 
|  | scanchanlist[chanidx].channumber = cfp->channel; | 
|  |  | 
|  | if (filteredscan) { | 
|  | scanchanlist[chanidx].chanscanmode. | 
|  | disablechanfilt = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  | return chanidx; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Add SSID TLV of the form: | 
|  | * | 
|  | * TLV-ID SSID     00 00 | 
|  | * length          06 00 | 
|  | * ssid            4d 4e 54 45 53 54 | 
|  | */ | 
|  | static int lbs_scan_add_ssid_tlv(u8 *tlv, | 
|  | const struct lbs_ioctl_user_scan_cfg *user_cfg) | 
|  | { | 
|  | struct mrvlietypes_ssidparamset *ssid_tlv = | 
|  | (struct mrvlietypes_ssidparamset *)tlv; | 
|  | ssid_tlv->header.type = cpu_to_le16(TLV_TYPE_SSID); | 
|  | ssid_tlv->header.len = cpu_to_le16(user_cfg->ssid_len); | 
|  | memcpy(ssid_tlv->ssid, user_cfg->ssid, user_cfg->ssid_len); | 
|  | return sizeof(ssid_tlv->header) + user_cfg->ssid_len; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Add CHANLIST TLV of the form | 
|  | * | 
|  | * TLV-ID CHANLIST 01 01 | 
|  | * length          5b 00 | 
|  | * channel 1       00 01 00 00 00 64 00 | 
|  | *   radio type    00 | 
|  | *   channel          01 | 
|  | *   scan type           00 | 
|  | *   min scan time          00 00 | 
|  | *   max scan time                64 00 | 
|  | * channel 2       00 02 00 00 00 64 00 | 
|  | * channel 3       00 03 00 00 00 64 00 | 
|  | * channel 4       00 04 00 00 00 64 00 | 
|  | * channel 5       00 05 00 00 00 64 00 | 
|  | * channel 6       00 06 00 00 00 64 00 | 
|  | * channel 7       00 07 00 00 00 64 00 | 
|  | * channel 8       00 08 00 00 00 64 00 | 
|  | * channel 9       00 09 00 00 00 64 00 | 
|  | * channel 10      00 0a 00 00 00 64 00 | 
|  | * channel 11      00 0b 00 00 00 64 00 | 
|  | * channel 12      00 0c 00 00 00 64 00 | 
|  | * channel 13      00 0d 00 00 00 64 00 | 
|  | * | 
|  | */ | 
|  | static int lbs_scan_add_chanlist_tlv(u8 *tlv, | 
|  | struct chanscanparamset *chan_list, | 
|  | int chan_count) | 
|  | { | 
|  | size_t size = sizeof(struct chanscanparamset) * chan_count; | 
|  | struct mrvlietypes_chanlistparamset *chan_tlv = | 
|  | (struct mrvlietypes_chanlistparamset *) tlv; | 
|  |  | 
|  | chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); | 
|  | memcpy(chan_tlv->chanscanparam, chan_list, size); | 
|  | chan_tlv->header.len = cpu_to_le16(size); | 
|  | return sizeof(chan_tlv->header) + size; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Add RATES TLV of the form | 
|  | * | 
|  | * TLV-ID RATES    01 00 | 
|  | * length          0e 00 | 
|  | * rates           82 84 8b 96 0c 12 18 24 30 48 60 6c | 
|  | * | 
|  | * The rates are in lbs_bg_rates[], but for the 802.11b | 
|  | * rates the high bit isn't set. | 
|  | */ | 
|  | static int lbs_scan_add_rates_tlv(u8 *tlv) | 
|  | { | 
|  | int i; | 
|  | struct mrvlietypes_ratesparamset *rate_tlv = | 
|  | (struct mrvlietypes_ratesparamset *) tlv; | 
|  |  | 
|  | rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES); | 
|  | tlv += sizeof(rate_tlv->header); | 
|  | for (i = 0; i < MAX_RATES; i++) { | 
|  | *tlv = lbs_bg_rates[i]; | 
|  | if (*tlv == 0) | 
|  | break; | 
|  | /* This code makes sure that the 802.11b rates (1 MBit/s, 2 | 
|  | MBit/s, 5.5 MBit/s and 11 MBit/s get's the high bit set. | 
|  | Note that the values are MBit/s * 2, to mark them as | 
|  | basic rates so that the firmware likes it better */ | 
|  | if (*tlv == 0x02 || *tlv == 0x04 || | 
|  | *tlv == 0x0b || *tlv == 0x16) | 
|  | *tlv |= 0x80; | 
|  | tlv++; | 
|  | } | 
|  | rate_tlv->header.len = cpu_to_le16(i); | 
|  | return sizeof(rate_tlv->header) + i; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Generate the CMD_802_11_SCAN command with the proper tlv | 
|  | * for a bunch of channels. | 
|  | */ | 
|  | static int lbs_do_scan(struct lbs_private *priv, | 
|  | u8 bsstype, | 
|  | struct chanscanparamset *chan_list, | 
|  | int chan_count, | 
|  | const struct lbs_ioctl_user_scan_cfg *user_cfg) | 
|  | { | 
|  | int ret = -ENOMEM; | 
|  | struct lbs_scan_cmd_config *scan_cmd; | 
|  | u8 *tlv;    /* pointer into our current, growing TLV storage area */ | 
|  |  | 
|  | lbs_deb_enter_args(LBS_DEB_SCAN, "bsstype %d, chanlist[].chan %d, " | 
|  | "chan_count %d", | 
|  | bsstype, chan_list[0].channumber, chan_count); | 
|  |  | 
|  | /* create the fixed part for scan command */ | 
|  | scan_cmd = kzalloc(MAX_SCAN_CFG_ALLOC, GFP_KERNEL); | 
|  | if (scan_cmd == NULL) | 
|  | goto out; | 
|  | tlv = scan_cmd->tlvbuffer; | 
|  | if (user_cfg) | 
|  | memcpy(scan_cmd->bssid, user_cfg->bssid, ETH_ALEN); | 
|  | scan_cmd->bsstype = bsstype; | 
|  |  | 
|  | /* add TLVs */ | 
|  | if (user_cfg && user_cfg->ssid_len) | 
|  | tlv += lbs_scan_add_ssid_tlv(tlv, user_cfg); | 
|  | if (chan_list && chan_count) | 
|  | tlv += lbs_scan_add_chanlist_tlv(tlv, chan_list, chan_count); | 
|  | tlv += lbs_scan_add_rates_tlv(tlv); | 
|  |  | 
|  | /* This is the final data we are about to send */ | 
|  | scan_cmd->tlvbufferlen = tlv - scan_cmd->tlvbuffer; | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_CMD", (void *)scan_cmd, 1+6); | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TLV", scan_cmd->tlvbuffer, | 
|  | scan_cmd->tlvbufferlen); | 
|  |  | 
|  | ret = lbs_prepare_and_send_command(priv, CMD_802_11_SCAN, 0, | 
|  | CMD_OPTION_WAITFORRSP, 0, scan_cmd); | 
|  | out: | 
|  | kfree(scan_cmd); | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  @brief Internal function used to start a scan based on an input config | 
|  | * | 
|  | *  Also used from debugfs | 
|  | * | 
|  | *  Use the input user scan configuration information when provided in | 
|  | *    order to send the appropriate scan commands to firmware to populate or | 
|  | *    update the internal driver scan table | 
|  | * | 
|  | *  @param priv          A pointer to struct lbs_private structure | 
|  | *  @param puserscanin   Pointer to the input configuration for the requested | 
|  | *                       scan. | 
|  | * | 
|  | *  @return              0 or < 0 if error | 
|  | */ | 
|  | int lbs_scan_networks(struct lbs_private *priv, | 
|  | const struct lbs_ioctl_user_scan_cfg *user_cfg, | 
|  | int full_scan) | 
|  | { | 
|  | int ret = -ENOMEM; | 
|  | struct chanscanparamset *chan_list; | 
|  | struct chanscanparamset *curr_chans; | 
|  | int chan_count; | 
|  | u8 bsstype = CMD_BSS_TYPE_ANY; | 
|  | int numchannels = MRVDRV_CHANNELS_PER_SCAN_CMD; | 
|  | int filteredscan = 0; | 
|  | union iwreq_data wrqu; | 
|  | #ifdef CONFIG_LIBERTAS_DEBUG | 
|  | struct bss_descriptor *iter; | 
|  | int i = 0; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | #endif | 
|  |  | 
|  | lbs_deb_enter_args(LBS_DEB_SCAN, "full_scan %d", | 
|  | full_scan); | 
|  |  | 
|  | /* Cancel any partial outstanding partial scans if this scan | 
|  | * is a full scan. | 
|  | */ | 
|  | if (full_scan && delayed_work_pending(&priv->scan_work)) | 
|  | cancel_delayed_work(&priv->scan_work); | 
|  |  | 
|  | /* Determine same scan parameters */ | 
|  | if (user_cfg) { | 
|  | if (user_cfg->bsstype) | 
|  | bsstype = user_cfg->bsstype; | 
|  | if (compare_ether_addr(user_cfg->bssid, &zeromac[0]) != 0) { | 
|  | numchannels = MRVDRV_MAX_CHANNELS_PER_SCAN; | 
|  | filteredscan = 1; | 
|  | } | 
|  | } | 
|  | lbs_deb_scan("numchannels %d, bsstype %d, " | 
|  | "filteredscan %d\n", | 
|  | numchannels, bsstype, filteredscan); | 
|  |  | 
|  | /* Create list of channels to scan */ | 
|  | chan_list = kzalloc(sizeof(struct chanscanparamset) * | 
|  | LBS_IOCTL_USER_SCAN_CHAN_MAX, GFP_KERNEL); | 
|  | if (!chan_list) { | 
|  | lbs_pr_alert("SCAN: chan_list empty\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* We want to scan all channels */ | 
|  | chan_count = lbs_scan_create_channel_list(priv, chan_list, | 
|  | filteredscan); | 
|  |  | 
|  | netif_stop_queue(priv->dev); | 
|  | netif_carrier_off(priv->dev); | 
|  | if (priv->mesh_dev) { | 
|  | netif_stop_queue(priv->mesh_dev); | 
|  | netif_carrier_off(priv->mesh_dev); | 
|  | } | 
|  |  | 
|  | /* Prepare to continue an interrupted scan */ | 
|  | lbs_deb_scan("chan_count %d, last_scanned_channel %d\n", | 
|  | chan_count, priv->last_scanned_channel); | 
|  | curr_chans = chan_list; | 
|  | /* advance channel list by already-scanned-channels */ | 
|  | if (priv->last_scanned_channel > 0) { | 
|  | curr_chans += priv->last_scanned_channel; | 
|  | chan_count -= priv->last_scanned_channel; | 
|  | } | 
|  |  | 
|  | /* Send scan command(s) | 
|  | * numchannels contains the number of channels we should maximally scan | 
|  | * chan_count is the total number of channels to scan | 
|  | */ | 
|  |  | 
|  | while (chan_count) { | 
|  | int to_scan = min(numchannels, chan_count); | 
|  | lbs_deb_scan("scanning %d of %d channels\n", | 
|  | to_scan, chan_count); | 
|  | ret = lbs_do_scan(priv, bsstype, curr_chans, | 
|  | to_scan, user_cfg); | 
|  | if (ret) { | 
|  | lbs_pr_err("SCAN_CMD failed\n"); | 
|  | goto out2; | 
|  | } | 
|  | curr_chans += to_scan; | 
|  | chan_count -= to_scan; | 
|  |  | 
|  | /* somehow schedule the next part of the scan */ | 
|  | if (chan_count && | 
|  | !full_scan && | 
|  | !priv->surpriseremoved) { | 
|  | /* -1 marks just that we're currently scanning */ | 
|  | if (priv->last_scanned_channel < 0) | 
|  | priv->last_scanned_channel = to_scan; | 
|  | else | 
|  | priv->last_scanned_channel += to_scan; | 
|  | cancel_delayed_work(&priv->scan_work); | 
|  | queue_delayed_work(priv->work_thread, &priv->scan_work, | 
|  | msecs_to_jiffies(300)); | 
|  | /* skip over GIWSCAN event */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | } | 
|  | memset(&wrqu, 0, sizeof(union iwreq_data)); | 
|  | wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL); | 
|  |  | 
|  | #ifdef CONFIG_LIBERTAS_DEBUG | 
|  | /* Dump the scan table */ | 
|  | mutex_lock(&priv->lock); | 
|  | lbs_deb_scan("scan table:\n"); | 
|  | list_for_each_entry(iter, &priv->network_list, list) | 
|  | lbs_deb_scan("%02d: BSSID %s, RSSI %d, SSID '%s'\n", | 
|  | i++, print_mac(mac, iter->bssid), (s32) iter->rssi, | 
|  | escape_essid(iter->ssid, iter->ssid_len)); | 
|  | mutex_unlock(&priv->lock); | 
|  | #endif | 
|  |  | 
|  | out2: | 
|  | priv->last_scanned_channel = 0; | 
|  |  | 
|  | out: | 
|  | if (priv->connect_status == LBS_CONNECTED) { | 
|  | netif_carrier_on(priv->dev); | 
|  | if (!priv->tx_pending_len) | 
|  | netif_wake_queue(priv->dev); | 
|  | } | 
|  | if (priv->mesh_dev && (priv->mesh_connect_status == LBS_CONNECTED)) { | 
|  | netif_carrier_on(priv->mesh_dev); | 
|  | if (!priv->tx_pending_len) | 
|  | netif_wake_queue(priv->mesh_dev); | 
|  | } | 
|  | kfree(chan_list); | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | /*********************************************************************/ | 
|  | /*                                                                   */ | 
|  | /*  Result interpretation                                            */ | 
|  | /*                                                                   */ | 
|  | /*********************************************************************/ | 
|  |  | 
|  | /** | 
|  | *  @brief Interpret a BSS scan response returned from the firmware | 
|  | * | 
|  | *  Parse the various fixed fields and IEs passed back for a a BSS probe | 
|  | *  response or beacon from the scan command.  Record information as needed | 
|  | *  in the scan table struct bss_descriptor for that entry. | 
|  | * | 
|  | *  @param bss  Output parameter: Pointer to the BSS Entry | 
|  | * | 
|  | *  @return             0 or -1 | 
|  | */ | 
|  | static int lbs_process_bss(struct bss_descriptor *bss, | 
|  | u8 ** pbeaconinfo, int *bytesleft) | 
|  | { | 
|  | struct ieeetypes_fhparamset *pFH; | 
|  | struct ieeetypes_dsparamset *pDS; | 
|  | struct ieeetypes_cfparamset *pCF; | 
|  | struct ieeetypes_ibssparamset *pibss; | 
|  | DECLARE_MAC_BUF(mac); | 
|  | struct ieeetypes_countryinfoset *pcountryinfo; | 
|  | u8 *pos, *end, *p; | 
|  | u8 n_ex_rates = 0, got_basic_rates = 0, n_basic_rates = 0; | 
|  | u16 beaconsize = 0; | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | if (*bytesleft >= sizeof(beaconsize)) { | 
|  | /* Extract & convert beacon size from the command buffer */ | 
|  | beaconsize = le16_to_cpu(get_unaligned((__le16 *)*pbeaconinfo)); | 
|  | *bytesleft -= sizeof(beaconsize); | 
|  | *pbeaconinfo += sizeof(beaconsize); | 
|  | } | 
|  |  | 
|  | if (beaconsize == 0 || beaconsize > *bytesleft) { | 
|  | *pbeaconinfo += *bytesleft; | 
|  | *bytesleft = 0; | 
|  | ret = -1; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* Initialize the current working beacon pointer for this BSS iteration */ | 
|  | pos = *pbeaconinfo; | 
|  | end = pos + beaconsize; | 
|  |  | 
|  | /* Advance the return beacon pointer past the current beacon */ | 
|  | *pbeaconinfo += beaconsize; | 
|  | *bytesleft -= beaconsize; | 
|  |  | 
|  | memcpy(bss->bssid, pos, ETH_ALEN); | 
|  | lbs_deb_scan("process_bss: BSSID %s\n", print_mac(mac, bss->bssid)); | 
|  | pos += ETH_ALEN; | 
|  |  | 
|  | if ((end - pos) < 12) { | 
|  | lbs_deb_scan("process_bss: Not enough bytes left\n"); | 
|  | ret = -1; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * next 4 fields are RSSI, time stamp, beacon interval, | 
|  | *   and capability information | 
|  | */ | 
|  |  | 
|  | /* RSSI is 1 byte long */ | 
|  | bss->rssi = *pos; | 
|  | lbs_deb_scan("process_bss: RSSI %d\n", *pos); | 
|  | pos++; | 
|  |  | 
|  | /* time stamp is 8 bytes long */ | 
|  | pos += 8; | 
|  |  | 
|  | /* beacon interval is 2 bytes long */ | 
|  | bss->beaconperiod = le16_to_cpup((void *) pos); | 
|  | pos += 2; | 
|  |  | 
|  | /* capability information is 2 bytes long */ | 
|  | bss->capability = le16_to_cpup((void *) pos); | 
|  | lbs_deb_scan("process_bss: capabilities 0x%04x\n", bss->capability); | 
|  | pos += 2; | 
|  |  | 
|  | if (bss->capability & WLAN_CAPABILITY_PRIVACY) | 
|  | lbs_deb_scan("process_bss: WEP enabled\n"); | 
|  | if (bss->capability & WLAN_CAPABILITY_IBSS) | 
|  | bss->mode = IW_MODE_ADHOC; | 
|  | else | 
|  | bss->mode = IW_MODE_INFRA; | 
|  |  | 
|  | /* rest of the current buffer are IE's */ | 
|  | lbs_deb_scan("process_bss: IE len %zd\n", end - pos); | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "process_bss: IE info", pos, end - pos); | 
|  |  | 
|  | /* process variable IE */ | 
|  | while (pos <= end - 2) { | 
|  | struct ieee80211_info_element * elem = | 
|  | (struct ieee80211_info_element *) pos; | 
|  |  | 
|  | if (pos + elem->len > end) { | 
|  | lbs_deb_scan("process_bss: error in processing IE, " | 
|  | "bytes left < IE length\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (elem->id) { | 
|  | case MFIE_TYPE_SSID: | 
|  | bss->ssid_len = elem->len; | 
|  | memcpy(bss->ssid, elem->data, elem->len); | 
|  | lbs_deb_scan("got SSID IE: '%s', len %u\n", | 
|  | escape_essid(bss->ssid, bss->ssid_len), | 
|  | bss->ssid_len); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_RATES: | 
|  | n_basic_rates = min_t(u8, MAX_RATES, elem->len); | 
|  | memcpy(bss->rates, elem->data, n_basic_rates); | 
|  | got_basic_rates = 1; | 
|  | lbs_deb_scan("got RATES IE\n"); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_FH_SET: | 
|  | pFH = (struct ieeetypes_fhparamset *) pos; | 
|  | memmove(&bss->phyparamset.fhparamset, pFH, | 
|  | sizeof(struct ieeetypes_fhparamset)); | 
|  | lbs_deb_scan("got FH IE\n"); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_DS_SET: | 
|  | pDS = (struct ieeetypes_dsparamset *) pos; | 
|  | bss->channel = pDS->currentchan; | 
|  | memcpy(&bss->phyparamset.dsparamset, pDS, | 
|  | sizeof(struct ieeetypes_dsparamset)); | 
|  | lbs_deb_scan("got DS IE, channel %d\n", bss->channel); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_CF_SET: | 
|  | pCF = (struct ieeetypes_cfparamset *) pos; | 
|  | memcpy(&bss->ssparamset.cfparamset, pCF, | 
|  | sizeof(struct ieeetypes_cfparamset)); | 
|  | lbs_deb_scan("got CF IE\n"); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_IBSS_SET: | 
|  | pibss = (struct ieeetypes_ibssparamset *) pos; | 
|  | bss->atimwindow = le16_to_cpu(pibss->atimwindow); | 
|  | memmove(&bss->ssparamset.ibssparamset, pibss, | 
|  | sizeof(struct ieeetypes_ibssparamset)); | 
|  | lbs_deb_scan("got IBSS IE\n"); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_COUNTRY: | 
|  | pcountryinfo = (struct ieeetypes_countryinfoset *) pos; | 
|  | lbs_deb_scan("got COUNTRY IE\n"); | 
|  | if (pcountryinfo->len < sizeof(pcountryinfo->countrycode) | 
|  | || pcountryinfo->len > 254) { | 
|  | lbs_deb_scan("process_bss: 11D- Err " | 
|  | "CountryInfo len %d, min %zd, max 254\n", | 
|  | pcountryinfo->len, | 
|  | sizeof(pcountryinfo->countrycode)); | 
|  | ret = -1; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | memcpy(&bss->countryinfo, | 
|  | pcountryinfo, pcountryinfo->len + 2); | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "process_bss: 11d countryinfo", | 
|  | (u8 *) pcountryinfo, | 
|  | (u32) (pcountryinfo->len + 2)); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_RATES_EX: | 
|  | /* only process extended supported rate if data rate is | 
|  | * already found. Data rate IE should come before | 
|  | * extended supported rate IE | 
|  | */ | 
|  | lbs_deb_scan("got RATESEX IE\n"); | 
|  | if (!got_basic_rates) { | 
|  | lbs_deb_scan("... but ignoring it\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | n_ex_rates = elem->len; | 
|  | if (n_basic_rates + n_ex_rates > MAX_RATES) | 
|  | n_ex_rates = MAX_RATES - n_basic_rates; | 
|  |  | 
|  | p = bss->rates + n_basic_rates; | 
|  | memcpy(p, elem->data, n_ex_rates); | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_GENERIC: | 
|  | if (elem->len >= 4 && | 
|  | elem->data[0] == 0x00 && | 
|  | elem->data[1] == 0x50 && | 
|  | elem->data[2] == 0xf2 && | 
|  | elem->data[3] == 0x01) { | 
|  | bss->wpa_ie_len = min(elem->len + 2, | 
|  | MAX_WPA_IE_LEN); | 
|  | memcpy(bss->wpa_ie, elem, bss->wpa_ie_len); | 
|  | lbs_deb_scan("got WPA IE\n"); | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "WPA IE", bss->wpa_ie, | 
|  | elem->len); | 
|  | } else if (elem->len >= MARVELL_MESH_IE_LENGTH && | 
|  | elem->data[0] == 0x00 && | 
|  | elem->data[1] == 0x50 && | 
|  | elem->data[2] == 0x43 && | 
|  | elem->data[3] == 0x04) { | 
|  | lbs_deb_scan("got mesh IE\n"); | 
|  | bss->mesh = 1; | 
|  | } else { | 
|  | lbs_deb_scan("got generiec IE: " | 
|  | "%02x:%02x:%02x:%02x, len %d\n", | 
|  | elem->data[0], elem->data[1], | 
|  | elem->data[2], elem->data[3], | 
|  | elem->len); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_RSN: | 
|  | lbs_deb_scan("got RSN IE\n"); | 
|  | bss->rsn_ie_len = min(elem->len + 2, MAX_WPA_IE_LEN); | 
|  | memcpy(bss->rsn_ie, elem, bss->rsn_ie_len); | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "process_bss: RSN_IE", | 
|  | bss->rsn_ie, elem->len); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | lbs_deb_scan("got IE 0x%04x, len %d\n", | 
|  | elem->id, elem->len); | 
|  | break; | 
|  | } | 
|  |  | 
|  | pos += elem->len + 2; | 
|  | } | 
|  |  | 
|  | /* Timestamp */ | 
|  | bss->last_scanned = jiffies; | 
|  | lbs_unset_basic_rate_flags(bss->rates, sizeof(bss->rates)); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function finds a specific compatible BSSID in the scan list | 
|  | * | 
|  | *  Used in association code | 
|  | * | 
|  | *  @param priv  A pointer to struct lbs_private | 
|  | *  @param bssid    BSSID to find in the scan list | 
|  | *  @param mode     Network mode: Infrastructure or IBSS | 
|  | * | 
|  | *  @return         index in BSSID list, or error return code (< 0) | 
|  | */ | 
|  | struct bss_descriptor *lbs_find_bssid_in_list(struct lbs_private *priv, | 
|  | u8 * bssid, u8 mode) | 
|  | { | 
|  | struct bss_descriptor * iter_bss; | 
|  | struct bss_descriptor * found_bss = NULL; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | if (!bssid) | 
|  | goto out; | 
|  |  | 
|  | lbs_deb_hex(LBS_DEB_SCAN, "looking for", | 
|  | bssid, ETH_ALEN); | 
|  |  | 
|  | /* Look through the scan table for a compatible match.  The loop will | 
|  | *   continue past a matched bssid that is not compatible in case there | 
|  | *   is an AP with multiple SSIDs assigned to the same BSSID | 
|  | */ | 
|  | mutex_lock(&priv->lock); | 
|  | list_for_each_entry (iter_bss, &priv->network_list, list) { | 
|  | if (compare_ether_addr(iter_bss->bssid, bssid)) | 
|  | continue; /* bssid doesn't match */ | 
|  | switch (mode) { | 
|  | case IW_MODE_INFRA: | 
|  | case IW_MODE_ADHOC: | 
|  | if (!is_network_compatible(priv, iter_bss, mode)) | 
|  | break; | 
|  | found_bss = iter_bss; | 
|  | break; | 
|  | default: | 
|  | found_bss = iter_bss; | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&priv->lock); | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "found_bss %p", found_bss); | 
|  | return found_bss; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function finds ssid in ssid list. | 
|  | * | 
|  | *  Used in association code | 
|  | * | 
|  | *  @param priv  A pointer to struct lbs_private | 
|  | *  @param ssid     SSID to find in the list | 
|  | *  @param bssid    BSSID to qualify the SSID selection (if provided) | 
|  | *  @param mode     Network mode: Infrastructure or IBSS | 
|  | * | 
|  | *  @return         index in BSSID list | 
|  | */ | 
|  | struct bss_descriptor *lbs_find_ssid_in_list(struct lbs_private *priv, | 
|  | u8 *ssid, u8 ssid_len, u8 * bssid, u8 mode, | 
|  | int channel) | 
|  | { | 
|  | u8 bestrssi = 0; | 
|  | struct bss_descriptor * iter_bss = NULL; | 
|  | struct bss_descriptor * found_bss = NULL; | 
|  | struct bss_descriptor * tmp_oldest = NULL; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | mutex_lock(&priv->lock); | 
|  |  | 
|  | list_for_each_entry (iter_bss, &priv->network_list, list) { | 
|  | if (   !tmp_oldest | 
|  | || (iter_bss->last_scanned < tmp_oldest->last_scanned)) | 
|  | tmp_oldest = iter_bss; | 
|  |  | 
|  | if (lbs_ssid_cmp(iter_bss->ssid, iter_bss->ssid_len, | 
|  | ssid, ssid_len) != 0) | 
|  | continue; /* ssid doesn't match */ | 
|  | if (bssid && compare_ether_addr(iter_bss->bssid, bssid) != 0) | 
|  | continue; /* bssid doesn't match */ | 
|  | if ((channel > 0) && (iter_bss->channel != channel)) | 
|  | continue; /* channel doesn't match */ | 
|  |  | 
|  | switch (mode) { | 
|  | case IW_MODE_INFRA: | 
|  | case IW_MODE_ADHOC: | 
|  | if (!is_network_compatible(priv, iter_bss, mode)) | 
|  | break; | 
|  |  | 
|  | if (bssid) { | 
|  | /* Found requested BSSID */ | 
|  | found_bss = iter_bss; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { | 
|  | bestrssi = SCAN_RSSI(iter_bss->rssi); | 
|  | found_bss = iter_bss; | 
|  | } | 
|  | break; | 
|  | case IW_MODE_AUTO: | 
|  | default: | 
|  | if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { | 
|  | bestrssi = SCAN_RSSI(iter_bss->rssi); | 
|  | found_bss = iter_bss; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->lock); | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "found_bss %p", found_bss); | 
|  | return found_bss; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function finds the best SSID in the Scan List | 
|  | * | 
|  | *  Search the scan table for the best SSID that also matches the current | 
|  | *   adapter network preference (infrastructure or adhoc) | 
|  | * | 
|  | *  @param priv  A pointer to struct lbs_private | 
|  | * | 
|  | *  @return         index in BSSID list | 
|  | */ | 
|  | static struct bss_descriptor *lbs_find_best_ssid_in_list( | 
|  | struct lbs_private *priv, | 
|  | u8 mode) | 
|  | { | 
|  | u8 bestrssi = 0; | 
|  | struct bss_descriptor * iter_bss; | 
|  | struct bss_descriptor * best_bss = NULL; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | mutex_lock(&priv->lock); | 
|  |  | 
|  | list_for_each_entry (iter_bss, &priv->network_list, list) { | 
|  | switch (mode) { | 
|  | case IW_MODE_INFRA: | 
|  | case IW_MODE_ADHOC: | 
|  | if (!is_network_compatible(priv, iter_bss, mode)) | 
|  | break; | 
|  | if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) | 
|  | break; | 
|  | bestrssi = SCAN_RSSI(iter_bss->rssi); | 
|  | best_bss = iter_bss; | 
|  | break; | 
|  | case IW_MODE_AUTO: | 
|  | default: | 
|  | if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) | 
|  | break; | 
|  | bestrssi = SCAN_RSSI(iter_bss->rssi); | 
|  | best_bss = iter_bss; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->lock); | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "best_bss %p", best_bss); | 
|  | return best_bss; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief Find the AP with specific ssid in the scan list | 
|  | * | 
|  | *  Used from association worker. | 
|  | * | 
|  | *  @param priv         A pointer to struct lbs_private structure | 
|  | *  @param pSSID        A pointer to AP's ssid | 
|  | * | 
|  | *  @return             0--success, otherwise--fail | 
|  | */ | 
|  | int lbs_find_best_network_ssid(struct lbs_private *priv, | 
|  | u8 *out_ssid, u8 *out_ssid_len, u8 preferred_mode, u8 *out_mode) | 
|  | { | 
|  | int ret = -1; | 
|  | struct bss_descriptor * found; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | lbs_scan_networks(priv, NULL, 1); | 
|  | if (priv->surpriseremoved) | 
|  | goto out; | 
|  |  | 
|  | found = lbs_find_best_ssid_in_list(priv, preferred_mode); | 
|  | if (found && (found->ssid_len > 0)) { | 
|  | memcpy(out_ssid, &found->ssid, IW_ESSID_MAX_SIZE); | 
|  | *out_ssid_len = found->ssid_len; | 
|  | *out_mode = found->mode; | 
|  | ret = 0; | 
|  | } | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  @brief Send a scan command for all available channels filtered on a spec | 
|  | * | 
|  | *  Used in association code and from debugfs | 
|  | * | 
|  | *  @param priv             A pointer to struct lbs_private structure | 
|  | *  @param ssid             A pointer to the SSID to scan for | 
|  | *  @param ssid_len         Length of the SSID | 
|  | *  @param clear_ssid       Should existing scan results with this SSID | 
|  | *                          be cleared? | 
|  | * | 
|  | *  @return                0-success, otherwise fail | 
|  | */ | 
|  | int lbs_send_specific_ssid_scan(struct lbs_private *priv, | 
|  | u8 *ssid, u8 ssid_len, u8 clear_ssid) | 
|  | { | 
|  | struct lbs_ioctl_user_scan_cfg scancfg; | 
|  | int ret = 0; | 
|  |  | 
|  | lbs_deb_enter_args(LBS_DEB_SCAN, "SSID '%s', clear %d", | 
|  | escape_essid(ssid, ssid_len), clear_ssid); | 
|  |  | 
|  | if (!ssid_len) | 
|  | goto out; | 
|  |  | 
|  | memset(&scancfg, 0x00, sizeof(scancfg)); | 
|  | memcpy(scancfg.ssid, ssid, ssid_len); | 
|  | scancfg.ssid_len = ssid_len; | 
|  | scancfg.clear_ssid = clear_ssid; | 
|  |  | 
|  | lbs_scan_networks(priv, &scancfg, 1); | 
|  | if (priv->surpriseremoved) { | 
|  | ret = -1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | /*********************************************************************/ | 
|  | /*                                                                   */ | 
|  | /*  Support for Wireless Extensions                                  */ | 
|  | /*                                                                   */ | 
|  | /*********************************************************************/ | 
|  |  | 
|  |  | 
|  | #define MAX_CUSTOM_LEN 64 | 
|  |  | 
|  | static inline char *lbs_translate_scan(struct lbs_private *priv, | 
|  | char *start, char *stop, | 
|  | struct bss_descriptor *bss) | 
|  | { | 
|  | struct chan_freq_power *cfp; | 
|  | char *current_val;	/* For rates */ | 
|  | struct iw_event iwe;	/* Temporary buffer */ | 
|  | int j; | 
|  | #define PERFECT_RSSI ((u8)50) | 
|  | #define WORST_RSSI   ((u8)0) | 
|  | #define RSSI_DIFF    ((u8)(PERFECT_RSSI - WORST_RSSI)) | 
|  | u8 rssi; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | cfp = lbs_find_cfp_by_band_and_channel(priv, 0, bss->channel); | 
|  | if (!cfp) { | 
|  | lbs_deb_scan("Invalid channel number %d\n", bss->channel); | 
|  | start = NULL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* First entry *MUST* be the BSSID */ | 
|  | iwe.cmd = SIOCGIWAP; | 
|  | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN); | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); | 
|  |  | 
|  | /* SSID */ | 
|  | iwe.cmd = SIOCGIWESSID; | 
|  | iwe.u.data.flags = 1; | 
|  | iwe.u.data.length = min((u32) bss->ssid_len, (u32) IW_ESSID_MAX_SIZE); | 
|  | start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); | 
|  |  | 
|  | /* Mode */ | 
|  | iwe.cmd = SIOCGIWMODE; | 
|  | iwe.u.mode = bss->mode; | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); | 
|  |  | 
|  | /* Frequency */ | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = (long)cfp->freq * 100000; | 
|  | iwe.u.freq.e = 1; | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); | 
|  |  | 
|  | /* Add quality statistics */ | 
|  | iwe.cmd = IWEVQUAL; | 
|  | iwe.u.qual.updated = IW_QUAL_ALL_UPDATED; | 
|  | iwe.u.qual.level = SCAN_RSSI(bss->rssi); | 
|  |  | 
|  | rssi = iwe.u.qual.level - MRVDRV_NF_DEFAULT_SCAN_VALUE; | 
|  | iwe.u.qual.qual = | 
|  | (100 * RSSI_DIFF * RSSI_DIFF - (PERFECT_RSSI - rssi) * | 
|  | (15 * (RSSI_DIFF) + 62 * (PERFECT_RSSI - rssi))) / | 
|  | (RSSI_DIFF * RSSI_DIFF); | 
|  | if (iwe.u.qual.qual > 100) | 
|  | iwe.u.qual.qual = 100; | 
|  |  | 
|  | if (priv->NF[TYPE_BEACON][TYPE_NOAVG] == 0) { | 
|  | iwe.u.qual.noise = MRVDRV_NF_DEFAULT_SCAN_VALUE; | 
|  | } else { | 
|  | iwe.u.qual.noise = | 
|  | CAL_NF(priv->NF[TYPE_BEACON][TYPE_NOAVG]); | 
|  | } | 
|  |  | 
|  | /* Locally created ad-hoc BSSs won't have beacons if this is the | 
|  | * only station in the adhoc network; so get signal strength | 
|  | * from receive statistics. | 
|  | */ | 
|  | if ((priv->mode == IW_MODE_ADHOC) | 
|  | && priv->adhoccreate | 
|  | && !lbs_ssid_cmp(priv->curbssparams.ssid, | 
|  | priv->curbssparams.ssid_len, | 
|  | bss->ssid, bss->ssid_len)) { | 
|  | int snr, nf; | 
|  | snr = priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; | 
|  | nf = priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; | 
|  | iwe.u.qual.level = CAL_RSSI(snr, nf); | 
|  | } | 
|  | start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); | 
|  |  | 
|  | /* Add encryption capability */ | 
|  | iwe.cmd = SIOCGIWENCODE; | 
|  | if (bss->capability & WLAN_CAPABILITY_PRIVACY) { | 
|  | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
|  | } else { | 
|  | iwe.u.data.flags = IW_ENCODE_DISABLED; | 
|  | } | 
|  | iwe.u.data.length = 0; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); | 
|  |  | 
|  | current_val = start + IW_EV_LCP_LEN; | 
|  |  | 
|  | iwe.cmd = SIOCGIWRATE; | 
|  | iwe.u.bitrate.fixed = 0; | 
|  | iwe.u.bitrate.disabled = 0; | 
|  | iwe.u.bitrate.value = 0; | 
|  |  | 
|  | for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) { | 
|  | /* Bit rate given in 500 kb/s units */ | 
|  | iwe.u.bitrate.value = bss->rates[j] * 500000; | 
|  | current_val = iwe_stream_add_value(start, current_val, | 
|  | stop, &iwe, IW_EV_PARAM_LEN); | 
|  | } | 
|  | if ((bss->mode == IW_MODE_ADHOC) | 
|  | && !lbs_ssid_cmp(priv->curbssparams.ssid, | 
|  | priv->curbssparams.ssid_len, | 
|  | bss->ssid, bss->ssid_len) | 
|  | && priv->adhoccreate) { | 
|  | iwe.u.bitrate.value = 22 * 500000; | 
|  | current_val = iwe_stream_add_value(start, current_val, | 
|  | stop, &iwe, IW_EV_PARAM_LEN); | 
|  | } | 
|  | /* Check if we added any event */ | 
|  | if((current_val - start) > IW_EV_LCP_LEN) | 
|  | start = current_val; | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | if (bss->wpa_ie_len) { | 
|  | char buf[MAX_WPA_IE_LEN]; | 
|  | memcpy(buf, bss->wpa_ie, bss->wpa_ie_len); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = bss->wpa_ie_len; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, buf); | 
|  | } | 
|  |  | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | if (bss->rsn_ie_len) { | 
|  | char buf[MAX_WPA_IE_LEN]; | 
|  | memcpy(buf, bss->rsn_ie, bss->rsn_ie_len); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = bss->rsn_ie_len; | 
|  | start = iwe_stream_add_point(start, stop, &iwe, buf); | 
|  | } | 
|  |  | 
|  | if (bss->mesh) { | 
|  | char custom[MAX_CUSTOM_LEN]; | 
|  | char *p = custom; | 
|  |  | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), | 
|  | "mesh-type: olpc"); | 
|  | iwe.u.data.length = p - custom; | 
|  | if (iwe.u.data.length) | 
|  | start = iwe_stream_add_point(start, stop, &iwe, custom); | 
|  | } | 
|  |  | 
|  | out: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "start %p", start); | 
|  | return start; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  @brief Handle Scan Network ioctl | 
|  | * | 
|  | *  @param dev          A pointer to net_device structure | 
|  | *  @param info         A pointer to iw_request_info structure | 
|  | *  @param vwrq         A pointer to iw_param structure | 
|  | *  @param extra        A pointer to extra data buf | 
|  | * | 
|  | *  @return             0 --success, otherwise fail | 
|  | */ | 
|  | int lbs_set_scan(struct net_device *dev, struct iw_request_info *info, | 
|  | struct iw_param *wrqu, char *extra) | 
|  | { | 
|  | struct lbs_private *priv = dev->priv; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | return -ENETDOWN; | 
|  |  | 
|  | /* mac80211 does this: | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | if (sdata->type != IEEE80211_IF_TYPE_xxx) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (wrqu->data.length == sizeof(struct iw_scan_req) && | 
|  | wrqu->data.flags & IW_SCAN_THIS_ESSID) { | 
|  | req = (struct iw_scan_req *)extra; | 
|  | ssid = req->essid; | 
|  | ssid_len = req->essid_len; | 
|  | } | 
|  | */ | 
|  |  | 
|  | if (!delayed_work_pending(&priv->scan_work)) | 
|  | queue_delayed_work(priv->work_thread, &priv->scan_work, | 
|  | msecs_to_jiffies(50)); | 
|  | /* set marker that currently a scan is taking place */ | 
|  | priv->last_scanned_channel = -1; | 
|  |  | 
|  | if (priv->surpriseremoved) | 
|  | return -EIO; | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_SCAN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  @brief  Handle Retrieve scan table ioctl | 
|  | * | 
|  | *  @param dev          A pointer to net_device structure | 
|  | *  @param info         A pointer to iw_request_info structure | 
|  | *  @param dwrq         A pointer to iw_point structure | 
|  | *  @param extra        A pointer to extra data buf | 
|  | * | 
|  | *  @return             0 --success, otherwise fail | 
|  | */ | 
|  | int lbs_get_scan(struct net_device *dev, struct iw_request_info *info, | 
|  | struct iw_point *dwrq, char *extra) | 
|  | { | 
|  | #define SCAN_ITEM_SIZE 128 | 
|  | struct lbs_private *priv = dev->priv; | 
|  | int err = 0; | 
|  | char *ev = extra; | 
|  | char *stop = ev + dwrq->length; | 
|  | struct bss_descriptor * iter_bss; | 
|  | struct bss_descriptor * safe; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | /* iwlist should wait until the current scan is finished */ | 
|  | if (priv->last_scanned_channel) | 
|  | return -EAGAIN; | 
|  |  | 
|  | /* Update RSSI if current BSS is a locally created ad-hoc BSS */ | 
|  | if ((priv->mode == IW_MODE_ADHOC) && priv->adhoccreate) { | 
|  | lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, | 
|  | CMD_OPTION_WAITFORRSP, 0, NULL); | 
|  | } | 
|  |  | 
|  | mutex_lock(&priv->lock); | 
|  | list_for_each_entry_safe (iter_bss, safe, &priv->network_list, list) { | 
|  | char * next_ev; | 
|  | unsigned long stale_time; | 
|  |  | 
|  | if (stop - ev < SCAN_ITEM_SIZE) { | 
|  | err = -E2BIG; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* For mesh device, list only mesh networks */ | 
|  | if (dev == priv->mesh_dev && !iter_bss->mesh) | 
|  | continue; | 
|  |  | 
|  | /* Prune old an old scan result */ | 
|  | stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE; | 
|  | if (time_after(jiffies, stale_time)) { | 
|  | list_move_tail (&iter_bss->list, | 
|  | &priv->network_free_list); | 
|  | clear_bss_descriptor(iter_bss); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Translate to WE format this entry */ | 
|  | next_ev = lbs_translate_scan(priv, ev, stop, iter_bss); | 
|  | if (next_ev == NULL) | 
|  | continue; | 
|  | ev = next_ev; | 
|  | } | 
|  | mutex_unlock(&priv->lock); | 
|  |  | 
|  | dwrq->length = (ev - extra); | 
|  | dwrq->flags = 0; | 
|  |  | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  |  | 
|  | /*********************************************************************/ | 
|  | /*                                                                   */ | 
|  | /*  Command execution                                                */ | 
|  | /*                                                                   */ | 
|  | /*********************************************************************/ | 
|  |  | 
|  |  | 
|  | /** | 
|  | *  @brief Prepare a scan command to be sent to the firmware | 
|  | * | 
|  | *  Called via lbs_prepare_and_send_command(priv, CMD_802_11_SCAN, ...) | 
|  | *  from cmd.c | 
|  | * | 
|  | *  Sends a fixed length data part (specifying the BSS type and BSSID filters) | 
|  | *  as well as a variable number/length of TLVs to the firmware. | 
|  | * | 
|  | *  @param priv       A pointer to struct lbs_private structure | 
|  | *  @param cmd        A pointer to cmd_ds_command structure to be sent to | 
|  | *                    firmware with the cmd_DS_801_11_SCAN structure | 
|  | *  @param pdata_buf  Void pointer cast of a lbs_scan_cmd_config struct used | 
|  | *                    to set the fields/TLVs for the command sent to firmware | 
|  | * | 
|  | *  @return           0 or -1 | 
|  | */ | 
|  | int lbs_cmd_80211_scan(struct lbs_private *priv, | 
|  | struct cmd_ds_command *cmd, void *pdata_buf) | 
|  | { | 
|  | struct cmd_ds_802_11_scan *pscan = &cmd->params.scan; | 
|  | struct lbs_scan_cmd_config *pscancfg = pdata_buf; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | /* Set fixed field variables in scan command */ | 
|  | pscan->bsstype = pscancfg->bsstype; | 
|  | memcpy(pscan->bssid, pscancfg->bssid, ETH_ALEN); | 
|  | memcpy(pscan->tlvbuffer, pscancfg->tlvbuffer, pscancfg->tlvbufferlen); | 
|  |  | 
|  | /* size is equal to the sizeof(fixed portions) + the TLV len + header */ | 
|  | cmd->size = cpu_to_le16(sizeof(pscan->bsstype) + ETH_ALEN | 
|  | + pscancfg->tlvbufferlen + S_DS_GEN); | 
|  |  | 
|  | lbs_deb_leave(LBS_DEB_SCAN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *  @brief This function handles the command response of scan | 
|  | * | 
|  | *  Called from handle_cmd_response() in cmdrespc. | 
|  | * | 
|  | *   The response buffer for the scan command has the following | 
|  | *      memory layout: | 
|  | * | 
|  | *     .-----------------------------------------------------------. | 
|  | *     |  header (4 * sizeof(u16)):  Standard command response hdr | | 
|  | *     .-----------------------------------------------------------. | 
|  | *     |  bufsize (u16) : sizeof the BSS Description data          | | 
|  | *     .-----------------------------------------------------------. | 
|  | *     |  NumOfSet (u8) : Number of BSS Descs returned             | | 
|  | *     .-----------------------------------------------------------. | 
|  | *     |  BSSDescription data (variable, size given in bufsize)    | | 
|  | *     .-----------------------------------------------------------. | 
|  | *     |  TLV data (variable, size calculated using header->size,  | | 
|  | *     |            bufsize and sizeof the fixed fields above)     | | 
|  | *     .-----------------------------------------------------------. | 
|  | * | 
|  | *  @param priv    A pointer to struct lbs_private structure | 
|  | *  @param resp    A pointer to cmd_ds_command | 
|  | * | 
|  | *  @return        0 or -1 | 
|  | */ | 
|  | int lbs_ret_80211_scan(struct lbs_private *priv, struct cmd_ds_command *resp) | 
|  | { | 
|  | struct cmd_ds_802_11_scan_rsp *pscan; | 
|  | struct bss_descriptor * iter_bss; | 
|  | struct bss_descriptor * safe; | 
|  | u8 *pbssinfo; | 
|  | u16 scanrespsize; | 
|  | int bytesleft; | 
|  | int idx; | 
|  | int tlvbufsize; | 
|  | int ret; | 
|  |  | 
|  | lbs_deb_enter(LBS_DEB_SCAN); | 
|  |  | 
|  | /* Prune old entries from scan table */ | 
|  | list_for_each_entry_safe (iter_bss, safe, &priv->network_list, list) { | 
|  | unsigned long stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE; | 
|  | if (time_before(jiffies, stale_time)) | 
|  | continue; | 
|  | list_move_tail (&iter_bss->list, &priv->network_free_list); | 
|  | clear_bss_descriptor(iter_bss); | 
|  | } | 
|  |  | 
|  | pscan = &resp->params.scanresp; | 
|  |  | 
|  | if (pscan->nr_sets > MAX_NETWORK_COUNT) { | 
|  | lbs_deb_scan( | 
|  | "SCAN_RESP: too many scan results (%d, max %d)!!\n", | 
|  | pscan->nr_sets, MAX_NETWORK_COUNT); | 
|  | ret = -1; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | bytesleft = le16_to_cpu(pscan->bssdescriptsize); | 
|  | lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft); | 
|  |  | 
|  | scanrespsize = le16_to_cpu(resp->size); | 
|  | lbs_deb_scan("SCAN_RESP: scan results %d\n", pscan->nr_sets); | 
|  |  | 
|  | pbssinfo = pscan->bssdesc_and_tlvbuffer; | 
|  |  | 
|  | /* The size of the TLV buffer is equal to the entire command response | 
|  | *   size (scanrespsize) minus the fixed fields (sizeof()'s), the | 
|  | *   BSS Descriptions (bssdescriptsize as bytesLef) and the command | 
|  | *   response header (S_DS_GEN) | 
|  | */ | 
|  | tlvbufsize = scanrespsize - (bytesleft + sizeof(pscan->bssdescriptsize) | 
|  | + sizeof(pscan->nr_sets) | 
|  | + S_DS_GEN); | 
|  |  | 
|  | /* | 
|  | *  Process each scan response returned (pscan->nr_sets).  Save | 
|  | *    the information in the newbssentry and then insert into the | 
|  | *    driver scan table either as an update to an existing entry | 
|  | *    or as an addition at the end of the table | 
|  | */ | 
|  | for (idx = 0; idx < pscan->nr_sets && bytesleft; idx++) { | 
|  | struct bss_descriptor new; | 
|  | struct bss_descriptor * found = NULL; | 
|  | struct bss_descriptor * oldest = NULL; | 
|  | DECLARE_MAC_BUF(mac); | 
|  |  | 
|  | /* Process the data fields and IEs returned for this BSS */ | 
|  | memset(&new, 0, sizeof (struct bss_descriptor)); | 
|  | if (lbs_process_bss(&new, &pbssinfo, &bytesleft) != 0) { | 
|  | /* error parsing the scan response, skipped */ | 
|  | lbs_deb_scan("SCAN_RESP: process_bss returned ERROR\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Try to find this bss in the scan table */ | 
|  | list_for_each_entry (iter_bss, &priv->network_list, list) { | 
|  | if (is_same_network(iter_bss, &new)) { | 
|  | found = iter_bss; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((oldest == NULL) || | 
|  | (iter_bss->last_scanned < oldest->last_scanned)) | 
|  | oldest = iter_bss; | 
|  | } | 
|  |  | 
|  | if (found) { | 
|  | /* found, clear it */ | 
|  | clear_bss_descriptor(found); | 
|  | } else if (!list_empty(&priv->network_free_list)) { | 
|  | /* Pull one from the free list */ | 
|  | found = list_entry(priv->network_free_list.next, | 
|  | struct bss_descriptor, list); | 
|  | list_move_tail(&found->list, &priv->network_list); | 
|  | } else if (oldest) { | 
|  | /* If there are no more slots, expire the oldest */ | 
|  | found = oldest; | 
|  | clear_bss_descriptor(found); | 
|  | list_move_tail(&found->list, &priv->network_list); | 
|  | } else { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | lbs_deb_scan("SCAN_RESP: BSSID %s\n", | 
|  | print_mac(mac, new.bssid)); | 
|  |  | 
|  | /* Copy the locally created newbssentry to the scan table */ | 
|  | memcpy(found, &new, offsetof(struct bss_descriptor, list)); | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | done: | 
|  | lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); | 
|  | return ret; | 
|  | } |