| /* |
| * dvb_frontend.c: DVB frontend tuning interface/thread |
| * |
| * |
| * Copyright (C) 1999-2001 Ralph Metzler |
| * Marcus Metzler |
| * Holger Waechtler |
| * for convergence integrated media GmbH |
| * |
| * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * Or, point your browser to http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/module.h> |
| #include <linux/list.h> |
| #include <linux/freezer.h> |
| #include <linux/jiffies.h> |
| #include <linux/kthread.h> |
| #include <asm/processor.h> |
| |
| #include "dvb_frontend.h" |
| #include "dvbdev.h" |
| |
| static int dvb_frontend_debug; |
| static int dvb_shutdown_timeout; |
| static int dvb_force_auto_inversion; |
| static int dvb_override_tune_delay; |
| static int dvb_powerdown_on_sleep = 1; |
| |
| module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); |
| MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); |
| module_param(dvb_shutdown_timeout, int, 0644); |
| MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware"); |
| module_param(dvb_force_auto_inversion, int, 0644); |
| MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always"); |
| module_param(dvb_override_tune_delay, int, 0644); |
| MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt"); |
| module_param(dvb_powerdown_on_sleep, int, 0644); |
| MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)"); |
| |
| #define dprintk if (dvb_frontend_debug) printk |
| |
| #define FESTATE_IDLE 1 |
| #define FESTATE_RETUNE 2 |
| #define FESTATE_TUNING_FAST 4 |
| #define FESTATE_TUNING_SLOW 8 |
| #define FESTATE_TUNED 16 |
| #define FESTATE_ZIGZAG_FAST 32 |
| #define FESTATE_ZIGZAG_SLOW 64 |
| #define FESTATE_DISEQC 128 |
| #define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC) |
| #define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST) |
| #define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW) |
| #define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW) |
| |
| #define FE_ALGO_HW 1 |
| /* |
| * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling. |
| * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune. |
| * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress. |
| * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower. |
| * FESTATE_TUNED. The frontend has successfully locked on. |
| * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it. |
| * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower. |
| * FESTATE_DISEQC. A DISEQC command has just been issued. |
| * FESTATE_WAITFORLOCK. When we're waiting for a lock. |
| * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan. |
| * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan. |
| * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again. |
| */ |
| |
| static DEFINE_MUTEX(frontend_mutex); |
| |
| struct dvb_frontend_private { |
| |
| /* thread/frontend values */ |
| struct dvb_device *dvbdev; |
| struct dvb_frontend_parameters parameters; |
| struct dvb_fe_events events; |
| struct semaphore sem; |
| struct list_head list_head; |
| wait_queue_head_t wait_queue; |
| struct task_struct *thread; |
| unsigned long release_jiffies; |
| unsigned int exit; |
| unsigned int wakeup; |
| fe_status_t status; |
| unsigned long tune_mode_flags; |
| unsigned int delay; |
| unsigned int reinitialise; |
| int tone; |
| int voltage; |
| |
| /* swzigzag values */ |
| unsigned int state; |
| unsigned int bending; |
| int lnb_drift; |
| unsigned int inversion; |
| unsigned int auto_step; |
| unsigned int auto_sub_step; |
| unsigned int started_auto_step; |
| unsigned int min_delay; |
| unsigned int max_drift; |
| unsigned int step_size; |
| int quality; |
| unsigned int check_wrapped; |
| }; |
| |
| static void dvb_frontend_wakeup(struct dvb_frontend *fe); |
| |
| static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| struct dvb_fe_events *events = &fepriv->events; |
| struct dvb_frontend_event *e; |
| int wp; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (mutex_lock_interruptible (&events->mtx)) |
| return; |
| |
| wp = (events->eventw + 1) % MAX_EVENT; |
| |
| if (wp == events->eventr) { |
| events->overflow = 1; |
| events->eventr = (events->eventr + 1) % MAX_EVENT; |
| } |
| |
| e = &events->events[events->eventw]; |
| |
| memcpy (&e->parameters, &fepriv->parameters, |
| sizeof (struct dvb_frontend_parameters)); |
| |
| if (status & FE_HAS_LOCK) |
| if (fe->ops.get_frontend) |
| fe->ops.get_frontend(fe, &e->parameters); |
| |
| events->eventw = wp; |
| |
| mutex_unlock(&events->mtx); |
| |
| e->status = status; |
| |
| wake_up_interruptible (&events->wait_queue); |
| } |
| |
| static int dvb_frontend_get_event(struct dvb_frontend *fe, |
| struct dvb_frontend_event *event, int flags) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| struct dvb_fe_events *events = &fepriv->events; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (events->overflow) { |
| events->overflow = 0; |
| return -EOVERFLOW; |
| } |
| |
| if (events->eventw == events->eventr) { |
| int ret; |
| |
| if (flags & O_NONBLOCK) |
| return -EWOULDBLOCK; |
| |
| up(&fepriv->sem); |
| |
| ret = wait_event_interruptible (events->wait_queue, |
| events->eventw != events->eventr); |
| |
| if (down_interruptible (&fepriv->sem)) |
| return -ERESTARTSYS; |
| |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (mutex_lock_interruptible (&events->mtx)) |
| return -ERESTARTSYS; |
| |
| memcpy (event, &events->events[events->eventr], |
| sizeof(struct dvb_frontend_event)); |
| |
| events->eventr = (events->eventr + 1) % MAX_EVENT; |
| |
| mutex_unlock(&events->mtx); |
| |
| return 0; |
| } |
| |
| static void dvb_frontend_init(struct dvb_frontend *fe) |
| { |
| dprintk ("DVB: initialising frontend %i (%s)...\n", |
| fe->dvb->num, |
| fe->ops.info.name); |
| |
| if (fe->ops.init) |
| fe->ops.init(fe); |
| if (fe->ops.tuner_ops.init) { |
| fe->ops.tuner_ops.init(fe); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| } |
| |
| void dvb_frontend_reinitialise(struct dvb_frontend *fe) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| fepriv->reinitialise = 1; |
| dvb_frontend_wakeup(fe); |
| } |
| EXPORT_SYMBOL(dvb_frontend_reinitialise); |
| |
| static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked) |
| { |
| int q2; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (locked) |
| (fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256; |
| else |
| (fepriv->quality) = (fepriv->quality * 220 + 0) / 256; |
| |
| q2 = fepriv->quality - 128; |
| q2 *= q2; |
| |
| fepriv->delay = fepriv->min_delay + q2 * HZ / (128*128); |
| } |
| |
| /** |
| * Performs automatic twiddling of frontend parameters. |
| * |
| * @param fe The frontend concerned. |
| * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT |
| * @returns Number of complete iterations that have been performed. |
| */ |
| static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped) |
| { |
| int autoinversion; |
| int ready = 0; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| int original_inversion = fepriv->parameters.inversion; |
| u32 original_frequency = fepriv->parameters.frequency; |
| |
| /* are we using autoinversion? */ |
| autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && |
| (fepriv->parameters.inversion == INVERSION_AUTO)); |
| |
| /* setup parameters correctly */ |
| while(!ready) { |
| /* calculate the lnb_drift */ |
| fepriv->lnb_drift = fepriv->auto_step * fepriv->step_size; |
| |
| /* wrap the auto_step if we've exceeded the maximum drift */ |
| if (fepriv->lnb_drift > fepriv->max_drift) { |
| fepriv->auto_step = 0; |
| fepriv->auto_sub_step = 0; |
| fepriv->lnb_drift = 0; |
| } |
| |
| /* perform inversion and +/- zigzag */ |
| switch(fepriv->auto_sub_step) { |
| case 0: |
| /* try with the current inversion and current drift setting */ |
| ready = 1; |
| break; |
| |
| case 1: |
| if (!autoinversion) break; |
| |
| fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; |
| ready = 1; |
| break; |
| |
| case 2: |
| if (fepriv->lnb_drift == 0) break; |
| |
| fepriv->lnb_drift = -fepriv->lnb_drift; |
| ready = 1; |
| break; |
| |
| case 3: |
| if (fepriv->lnb_drift == 0) break; |
| if (!autoinversion) break; |
| |
| fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; |
| fepriv->lnb_drift = -fepriv->lnb_drift; |
| ready = 1; |
| break; |
| |
| default: |
| fepriv->auto_step++; |
| fepriv->auto_sub_step = -1; /* it'll be incremented to 0 in a moment */ |
| break; |
| } |
| |
| if (!ready) fepriv->auto_sub_step++; |
| } |
| |
| /* if this attempt would hit where we started, indicate a complete |
| * iteration has occurred */ |
| if ((fepriv->auto_step == fepriv->started_auto_step) && |
| (fepriv->auto_sub_step == 0) && check_wrapped) { |
| return 1; |
| } |
| |
| dprintk("%s: drift:%i inversion:%i auto_step:%i " |
| "auto_sub_step:%i started_auto_step:%i\n", |
| __func__, fepriv->lnb_drift, fepriv->inversion, |
| fepriv->auto_step, fepriv->auto_sub_step, fepriv->started_auto_step); |
| |
| /* set the frontend itself */ |
| fepriv->parameters.frequency += fepriv->lnb_drift; |
| if (autoinversion) |
| fepriv->parameters.inversion = fepriv->inversion; |
| if (fe->ops.set_frontend) |
| fe->ops.set_frontend(fe, &fepriv->parameters); |
| |
| fepriv->parameters.frequency = original_frequency; |
| fepriv->parameters.inversion = original_inversion; |
| |
| fepriv->auto_sub_step++; |
| return 0; |
| } |
| |
| static void dvb_frontend_swzigzag(struct dvb_frontend *fe) |
| { |
| fe_status_t s = 0; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| /* if we've got no parameters, just keep idling */ |
| if (fepriv->state & FESTATE_IDLE) { |
| fepriv->delay = 3*HZ; |
| fepriv->quality = 0; |
| return; |
| } |
| |
| /* in SCAN mode, we just set the frontend when asked and leave it alone */ |
| if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) { |
| if (fepriv->state & FESTATE_RETUNE) { |
| if (fe->ops.set_frontend) |
| fe->ops.set_frontend(fe, &fepriv->parameters); |
| fepriv->state = FESTATE_TUNED; |
| } |
| fepriv->delay = 3*HZ; |
| fepriv->quality = 0; |
| return; |
| } |
| |
| /* get the frontend status */ |
| if (fepriv->state & FESTATE_RETUNE) { |
| s = 0; |
| } else { |
| if (fe->ops.read_status) |
| fe->ops.read_status(fe, &s); |
| if (s != fepriv->status) { |
| dvb_frontend_add_event(fe, s); |
| fepriv->status = s; |
| } |
| } |
| |
| /* if we're not tuned, and we have a lock, move to the TUNED state */ |
| if ((fepriv->state & FESTATE_WAITFORLOCK) && (s & FE_HAS_LOCK)) { |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); |
| fepriv->state = FESTATE_TUNED; |
| |
| /* if we're tuned, then we have determined the correct inversion */ |
| if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && |
| (fepriv->parameters.inversion == INVERSION_AUTO)) { |
| fepriv->parameters.inversion = fepriv->inversion; |
| } |
| return; |
| } |
| |
| /* if we are tuned already, check we're still locked */ |
| if (fepriv->state & FESTATE_TUNED) { |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); |
| |
| /* we're tuned, and the lock is still good... */ |
| if (s & FE_HAS_LOCK) { |
| return; |
| } else { /* if we _WERE_ tuned, but now don't have a lock */ |
| fepriv->state = FESTATE_ZIGZAG_FAST; |
| fepriv->started_auto_step = fepriv->auto_step; |
| fepriv->check_wrapped = 0; |
| } |
| } |
| |
| /* don't actually do anything if we're in the LOSTLOCK state, |
| * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */ |
| if ((fepriv->state & FESTATE_LOSTLOCK) && |
| (fe->ops.info.caps & FE_CAN_RECOVER) && (fepriv->max_drift == 0)) { |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); |
| return; |
| } |
| |
| /* don't do anything if we're in the DISEQC state, since this |
| * might be someone with a motorized dish controlled by DISEQC. |
| * If its actually a re-tune, there will be a SET_FRONTEND soon enough. */ |
| if (fepriv->state & FESTATE_DISEQC) { |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); |
| return; |
| } |
| |
| /* if we're in the RETUNE state, set everything up for a brand |
| * new scan, keeping the current inversion setting, as the next |
| * tune is _very_ likely to require the same */ |
| if (fepriv->state & FESTATE_RETUNE) { |
| fepriv->lnb_drift = 0; |
| fepriv->auto_step = 0; |
| fepriv->auto_sub_step = 0; |
| fepriv->started_auto_step = 0; |
| fepriv->check_wrapped = 0; |
| } |
| |
| /* fast zigzag. */ |
| if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) { |
| fepriv->delay = fepriv->min_delay; |
| |
| /* peform a tune */ |
| if (dvb_frontend_swzigzag_autotune(fe, fepriv->check_wrapped)) { |
| /* OK, if we've run out of trials at the fast speed. |
| * Drop back to slow for the _next_ attempt */ |
| fepriv->state = FESTATE_SEARCHING_SLOW; |
| fepriv->started_auto_step = fepriv->auto_step; |
| return; |
| } |
| fepriv->check_wrapped = 1; |
| |
| /* if we've just retuned, enter the ZIGZAG_FAST state. |
| * This ensures we cannot return from an |
| * FE_SET_FRONTEND ioctl before the first frontend tune |
| * occurs */ |
| if (fepriv->state & FESTATE_RETUNE) { |
| fepriv->state = FESTATE_TUNING_FAST; |
| } |
| } |
| |
| /* slow zigzag */ |
| if (fepriv->state & FESTATE_SEARCHING_SLOW) { |
| dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); |
| |
| /* Note: don't bother checking for wrapping; we stay in this |
| * state until we get a lock */ |
| dvb_frontend_swzigzag_autotune(fe, 0); |
| } |
| } |
| |
| static int dvb_frontend_is_exiting(struct dvb_frontend *fe) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| if (fepriv->exit) |
| return 1; |
| |
| if (fepriv->dvbdev->writers == 1) |
| if (time_after(jiffies, fepriv->release_jiffies + |
| dvb_shutdown_timeout * HZ)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int dvb_frontend_should_wakeup(struct dvb_frontend *fe) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| if (fepriv->wakeup) { |
| fepriv->wakeup = 0; |
| return 1; |
| } |
| return dvb_frontend_is_exiting(fe); |
| } |
| |
| static void dvb_frontend_wakeup(struct dvb_frontend *fe) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| fepriv->wakeup = 1; |
| wake_up_interruptible(&fepriv->wait_queue); |
| } |
| |
| static int dvb_frontend_thread(void *data) |
| { |
| struct dvb_frontend *fe = data; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| unsigned long timeout; |
| fe_status_t s; |
| struct dvb_frontend_parameters *params; |
| |
| dprintk("%s\n", __func__); |
| |
| fepriv->check_wrapped = 0; |
| fepriv->quality = 0; |
| fepriv->delay = 3*HZ; |
| fepriv->status = 0; |
| fepriv->wakeup = 0; |
| fepriv->reinitialise = 0; |
| |
| dvb_frontend_init(fe); |
| |
| set_freezable(); |
| while (1) { |
| up(&fepriv->sem); /* is locked when we enter the thread... */ |
| restart: |
| timeout = wait_event_interruptible_timeout(fepriv->wait_queue, |
| dvb_frontend_should_wakeup(fe) || kthread_should_stop() |
| || freezing(current), |
| fepriv->delay); |
| |
| if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) { |
| /* got signal or quitting */ |
| break; |
| } |
| |
| if (try_to_freeze()) |
| goto restart; |
| |
| if (down_interruptible(&fepriv->sem)) |
| break; |
| |
| if (fepriv->reinitialise) { |
| dvb_frontend_init(fe); |
| if (fepriv->tone != -1) { |
| fe->ops.set_tone(fe, fepriv->tone); |
| } |
| if (fepriv->voltage != -1) { |
| fe->ops.set_voltage(fe, fepriv->voltage); |
| } |
| fepriv->reinitialise = 0; |
| } |
| |
| /* do an iteration of the tuning loop */ |
| if (fe->ops.get_frontend_algo) { |
| if (fe->ops.get_frontend_algo(fe) == FE_ALGO_HW) { |
| /* have we been asked to retune? */ |
| params = NULL; |
| if (fepriv->state & FESTATE_RETUNE) { |
| params = &fepriv->parameters; |
| fepriv->state = FESTATE_TUNED; |
| } |
| |
| fe->ops.tune(fe, params, fepriv->tune_mode_flags, &fepriv->delay, &s); |
| if (s != fepriv->status) { |
| dvb_frontend_add_event(fe, s); |
| fepriv->status = s; |
| } |
| } else |
| dvb_frontend_swzigzag(fe); |
| } else |
| dvb_frontend_swzigzag(fe); |
| } |
| |
| if (dvb_powerdown_on_sleep) { |
| if (fe->ops.set_voltage) |
| fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); |
| if (fe->ops.tuner_ops.sleep) { |
| fe->ops.tuner_ops.sleep(fe); |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| if (fe->ops.sleep) |
| fe->ops.sleep(fe); |
| } |
| |
| fepriv->thread = NULL; |
| mb(); |
| |
| dvb_frontend_wakeup(fe); |
| return 0; |
| } |
| |
| static void dvb_frontend_stop(struct dvb_frontend *fe) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| dprintk ("%s\n", __func__); |
| |
| fepriv->exit = 1; |
| mb(); |
| |
| if (!fepriv->thread) |
| return; |
| |
| kthread_stop(fepriv->thread); |
| |
| init_MUTEX (&fepriv->sem); |
| fepriv->state = FESTATE_IDLE; |
| |
| /* paranoia check in case a signal arrived */ |
| if (fepriv->thread) |
| printk("dvb_frontend_stop: warning: thread %p won't exit\n", |
| fepriv->thread); |
| } |
| |
| s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime) |
| { |
| return ((curtime.tv_usec < lasttime.tv_usec) ? |
| 1000000 - lasttime.tv_usec + curtime.tv_usec : |
| curtime.tv_usec - lasttime.tv_usec); |
| } |
| EXPORT_SYMBOL(timeval_usec_diff); |
| |
| static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec) |
| { |
| curtime->tv_usec += add_usec; |
| if (curtime->tv_usec >= 1000000) { |
| curtime->tv_usec -= 1000000; |
| curtime->tv_sec++; |
| } |
| } |
| |
| /* |
| * Sleep until gettimeofday() > waketime + add_usec |
| * This needs to be as precise as possible, but as the delay is |
| * usually between 2ms and 32ms, it is done using a scheduled msleep |
| * followed by usleep (normally a busy-wait loop) for the remainder |
| */ |
| void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec) |
| { |
| struct timeval lasttime; |
| s32 delta, newdelta; |
| |
| timeval_usec_add(waketime, add_usec); |
| |
| do_gettimeofday(&lasttime); |
| delta = timeval_usec_diff(lasttime, *waketime); |
| if (delta > 2500) { |
| msleep((delta - 1500) / 1000); |
| do_gettimeofday(&lasttime); |
| newdelta = timeval_usec_diff(lasttime, *waketime); |
| delta = (newdelta > delta) ? 0 : newdelta; |
| } |
| if (delta > 0) |
| udelay(delta); |
| } |
| EXPORT_SYMBOL(dvb_frontend_sleep_until); |
| |
| static int dvb_frontend_start(struct dvb_frontend *fe) |
| { |
| int ret; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| struct task_struct *fe_thread; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (fepriv->thread) { |
| if (!fepriv->exit) |
| return 0; |
| else |
| dvb_frontend_stop (fe); |
| } |
| |
| if (signal_pending(current)) |
| return -EINTR; |
| if (down_interruptible (&fepriv->sem)) |
| return -EINTR; |
| |
| fepriv->state = FESTATE_IDLE; |
| fepriv->exit = 0; |
| fepriv->thread = NULL; |
| mb(); |
| |
| fe_thread = kthread_run(dvb_frontend_thread, fe, |
| "kdvb-fe-%i", fe->dvb->num); |
| if (IS_ERR(fe_thread)) { |
| ret = PTR_ERR(fe_thread); |
| printk("dvb_frontend_start: failed to start kthread (%d)\n", ret); |
| up(&fepriv->sem); |
| return ret; |
| } |
| fepriv->thread = fe_thread; |
| return 0; |
| } |
| |
| static void dvb_frontend_get_frequeny_limits(struct dvb_frontend *fe, |
| u32 *freq_min, u32 *freq_max) |
| { |
| *freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min); |
| |
| if (fe->ops.info.frequency_max == 0) |
| *freq_max = fe->ops.tuner_ops.info.frequency_max; |
| else if (fe->ops.tuner_ops.info.frequency_max == 0) |
| *freq_max = fe->ops.info.frequency_max; |
| else |
| *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); |
| |
| if (*freq_min == 0 || *freq_max == 0) |
| printk(KERN_WARNING "DVB: frontend %u frequency limits undefined - fix the driver\n", |
| fe->dvb->num); |
| } |
| |
| static int dvb_frontend_check_parameters(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *parms) |
| { |
| u32 freq_min; |
| u32 freq_max; |
| |
| /* range check: frequency */ |
| dvb_frontend_get_frequeny_limits(fe, &freq_min, &freq_max); |
| if ((freq_min && parms->frequency < freq_min) || |
| (freq_max && parms->frequency > freq_max)) { |
| printk(KERN_WARNING "DVB: frontend %u frequency %u out of range (%u..%u)\n", |
| fe->dvb->num, parms->frequency, freq_min, freq_max); |
| return -EINVAL; |
| } |
| |
| /* range check: symbol rate */ |
| if (fe->ops.info.type == FE_QPSK) { |
| if ((fe->ops.info.symbol_rate_min && |
| parms->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min) || |
| (fe->ops.info.symbol_rate_max && |
| parms->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max)) { |
| printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n", |
| fe->dvb->num, parms->u.qpsk.symbol_rate, |
| fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max); |
| return -EINVAL; |
| } |
| |
| } else if (fe->ops.info.type == FE_QAM) { |
| if ((fe->ops.info.symbol_rate_min && |
| parms->u.qam.symbol_rate < fe->ops.info.symbol_rate_min) || |
| (fe->ops.info.symbol_rate_max && |
| parms->u.qam.symbol_rate > fe->ops.info.symbol_rate_max)) { |
| printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n", |
| fe->dvb->num, parms->u.qam.symbol_rate, |
| fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int dvb_frontend_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, void *parg) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_frontend *fe = dvbdev->priv; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| int err = -EOPNOTSUPP; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (fepriv->exit) |
| return -ENODEV; |
| |
| if ((file->f_flags & O_ACCMODE) == O_RDONLY && |
| (_IOC_DIR(cmd) != _IOC_READ || cmd == FE_GET_EVENT || |
| cmd == FE_DISEQC_RECV_SLAVE_REPLY)) |
| return -EPERM; |
| |
| if (down_interruptible (&fepriv->sem)) |
| return -ERESTARTSYS; |
| |
| switch (cmd) { |
| case FE_GET_INFO: { |
| struct dvb_frontend_info* info = parg; |
| memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info)); |
| dvb_frontend_get_frequeny_limits(fe, &info->frequency_min, &info->frequency_max); |
| |
| /* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't |
| * do it, it is done for it. */ |
| info->caps |= FE_CAN_INVERSION_AUTO; |
| err = 0; |
| break; |
| } |
| |
| case FE_READ_STATUS: { |
| fe_status_t* status = parg; |
| |
| /* if retune was requested but hasn't occured yet, prevent |
| * that user get signal state from previous tuning */ |
| if(fepriv->state == FESTATE_RETUNE) { |
| err=0; |
| *status = 0; |
| break; |
| } |
| |
| if (fe->ops.read_status) |
| err = fe->ops.read_status(fe, status); |
| break; |
| } |
| case FE_READ_BER: |
| if (fe->ops.read_ber) |
| err = fe->ops.read_ber(fe, (__u32*) parg); |
| break; |
| |
| case FE_READ_SIGNAL_STRENGTH: |
| if (fe->ops.read_signal_strength) |
| err = fe->ops.read_signal_strength(fe, (__u16*) parg); |
| break; |
| |
| case FE_READ_SNR: |
| if (fe->ops.read_snr) |
| err = fe->ops.read_snr(fe, (__u16*) parg); |
| break; |
| |
| case FE_READ_UNCORRECTED_BLOCKS: |
| if (fe->ops.read_ucblocks) |
| err = fe->ops.read_ucblocks(fe, (__u32*) parg); |
| break; |
| |
| |
| case FE_DISEQC_RESET_OVERLOAD: |
| if (fe->ops.diseqc_reset_overload) { |
| err = fe->ops.diseqc_reset_overload(fe); |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } |
| break; |
| |
| case FE_DISEQC_SEND_MASTER_CMD: |
| if (fe->ops.diseqc_send_master_cmd) { |
| err = fe->ops.diseqc_send_master_cmd(fe, (struct dvb_diseqc_master_cmd*) parg); |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } |
| break; |
| |
| case FE_DISEQC_SEND_BURST: |
| if (fe->ops.diseqc_send_burst) { |
| err = fe->ops.diseqc_send_burst(fe, (fe_sec_mini_cmd_t) parg); |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } |
| break; |
| |
| case FE_SET_TONE: |
| if (fe->ops.set_tone) { |
| err = fe->ops.set_tone(fe, (fe_sec_tone_mode_t) parg); |
| fepriv->tone = (fe_sec_tone_mode_t) parg; |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } |
| break; |
| |
| case FE_SET_VOLTAGE: |
| if (fe->ops.set_voltage) { |
| err = fe->ops.set_voltage(fe, (fe_sec_voltage_t) parg); |
| fepriv->voltage = (fe_sec_voltage_t) parg; |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } |
| break; |
| |
| case FE_DISHNETWORK_SEND_LEGACY_CMD: |
| if (fe->ops.dishnetwork_send_legacy_command) { |
| err = fe->ops.dishnetwork_send_legacy_command(fe, (unsigned long) parg); |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } else if (fe->ops.set_voltage) { |
| /* |
| * NOTE: This is a fallback condition. Some frontends |
| * (stv0299 for instance) take longer than 8msec to |
| * respond to a set_voltage command. Those switches |
| * need custom routines to switch properly. For all |
| * other frontends, the following shoule work ok. |
| * Dish network legacy switches (as used by Dish500) |
| * are controlled by sending 9-bit command words |
| * spaced 8msec apart. |
| * the actual command word is switch/port dependant |
| * so it is up to the userspace application to send |
| * the right command. |
| * The command must always start with a '0' after |
| * initialization, so parg is 8 bits and does not |
| * include the initialization or start bit |
| */ |
| unsigned long cmd = ((unsigned long) parg) << 1; |
| struct timeval nexttime; |
| struct timeval tv[10]; |
| int i; |
| u8 last = 1; |
| if (dvb_frontend_debug) |
| printk("%s switch command: 0x%04lx\n", __func__, cmd); |
| do_gettimeofday(&nexttime); |
| if (dvb_frontend_debug) |
| memcpy(&tv[0], &nexttime, sizeof(struct timeval)); |
| /* before sending a command, initialize by sending |
| * a 32ms 18V to the switch |
| */ |
| fe->ops.set_voltage(fe, SEC_VOLTAGE_18); |
| dvb_frontend_sleep_until(&nexttime, 32000); |
| |
| for (i = 0; i < 9; i++) { |
| if (dvb_frontend_debug) |
| do_gettimeofday(&tv[i + 1]); |
| if ((cmd & 0x01) != last) { |
| /* set voltage to (last ? 13V : 18V) */ |
| fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); |
| last = (last) ? 0 : 1; |
| } |
| cmd = cmd >> 1; |
| if (i != 8) |
| dvb_frontend_sleep_until(&nexttime, 8000); |
| } |
| if (dvb_frontend_debug) { |
| printk("%s(%d): switch delay (should be 32k followed by all 8k\n", |
| __func__, fe->dvb->num); |
| for (i = 1; i < 10; i++) |
| printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); |
| } |
| err = 0; |
| fepriv->state = FESTATE_DISEQC; |
| fepriv->status = 0; |
| } |
| break; |
| |
| case FE_DISEQC_RECV_SLAVE_REPLY: |
| if (fe->ops.diseqc_recv_slave_reply) |
| err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg); |
| break; |
| |
| case FE_ENABLE_HIGH_LNB_VOLTAGE: |
| if (fe->ops.enable_high_lnb_voltage) |
| err = fe->ops.enable_high_lnb_voltage(fe, (long) parg); |
| break; |
| |
| case FE_SET_FRONTEND: { |
| struct dvb_frontend_tune_settings fetunesettings; |
| |
| if (dvb_frontend_check_parameters(fe, parg) < 0) { |
| err = -EINVAL; |
| break; |
| } |
| |
| memcpy (&fepriv->parameters, parg, |
| sizeof (struct dvb_frontend_parameters)); |
| |
| memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); |
| memcpy(&fetunesettings.parameters, parg, |
| sizeof (struct dvb_frontend_parameters)); |
| |
| /* force auto frequency inversion if requested */ |
| if (dvb_force_auto_inversion) { |
| fepriv->parameters.inversion = INVERSION_AUTO; |
| fetunesettings.parameters.inversion = INVERSION_AUTO; |
| } |
| if (fe->ops.info.type == FE_OFDM) { |
| /* without hierarchical coding code_rate_LP is irrelevant, |
| * so we tolerate the otherwise invalid FEC_NONE setting */ |
| if (fepriv->parameters.u.ofdm.hierarchy_information == HIERARCHY_NONE && |
| fepriv->parameters.u.ofdm.code_rate_LP == FEC_NONE) |
| fepriv->parameters.u.ofdm.code_rate_LP = FEC_AUTO; |
| } |
| |
| /* get frontend-specific tuning settings */ |
| if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe, &fetunesettings) == 0)) { |
| fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000; |
| fepriv->max_drift = fetunesettings.max_drift; |
| fepriv->step_size = fetunesettings.step_size; |
| } else { |
| /* default values */ |
| switch(fe->ops.info.type) { |
| case FE_QPSK: |
| fepriv->min_delay = HZ/20; |
| fepriv->step_size = fepriv->parameters.u.qpsk.symbol_rate / 16000; |
| fepriv->max_drift = fepriv->parameters.u.qpsk.symbol_rate / 2000; |
| break; |
| |
| case FE_QAM: |
| fepriv->min_delay = HZ/20; |
| fepriv->step_size = 0; /* no zigzag */ |
| fepriv->max_drift = 0; |
| break; |
| |
| case FE_OFDM: |
| fepriv->min_delay = HZ/20; |
| fepriv->step_size = fe->ops.info.frequency_stepsize * 2; |
| fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; |
| break; |
| case FE_ATSC: |
| fepriv->min_delay = HZ/20; |
| fepriv->step_size = 0; |
| fepriv->max_drift = 0; |
| break; |
| } |
| } |
| if (dvb_override_tune_delay > 0) |
| fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000; |
| |
| fepriv->state = FESTATE_RETUNE; |
| dvb_frontend_wakeup(fe); |
| dvb_frontend_add_event(fe, 0); |
| fepriv->status = 0; |
| err = 0; |
| break; |
| } |
| |
| case FE_GET_EVENT: |
| err = dvb_frontend_get_event (fe, parg, file->f_flags); |
| break; |
| |
| case FE_GET_FRONTEND: |
| if (fe->ops.get_frontend) { |
| memcpy (parg, &fepriv->parameters, sizeof (struct dvb_frontend_parameters)); |
| err = fe->ops.get_frontend(fe, (struct dvb_frontend_parameters*) parg); |
| } |
| break; |
| |
| case FE_SET_FRONTEND_TUNE_MODE: |
| fepriv->tune_mode_flags = (unsigned long) parg; |
| err = 0; |
| break; |
| }; |
| |
| up (&fepriv->sem); |
| return err; |
| } |
| |
| static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_frontend *fe = dvbdev->priv; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| |
| dprintk ("%s\n", __func__); |
| |
| poll_wait (file, &fepriv->events.wait_queue, wait); |
| |
| if (fepriv->events.eventw != fepriv->events.eventr) |
| return (POLLIN | POLLRDNORM | POLLPRI); |
| |
| return 0; |
| } |
| |
| static int dvb_frontend_open(struct inode *inode, struct file *file) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_frontend *fe = dvbdev->priv; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| int ret; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { |
| if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) |
| return ret; |
| } |
| |
| if ((ret = dvb_generic_open (inode, file)) < 0) |
| goto err1; |
| |
| if ((file->f_flags & O_ACCMODE) != O_RDONLY) { |
| /* normal tune mode when opened R/W */ |
| fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT; |
| fepriv->tone = -1; |
| fepriv->voltage = -1; |
| |
| ret = dvb_frontend_start (fe); |
| if (ret) |
| goto err2; |
| |
| /* empty event queue */ |
| fepriv->events.eventr = fepriv->events.eventw = 0; |
| } |
| |
| return ret; |
| |
| err2: |
| dvb_generic_release(inode, file); |
| err1: |
| if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) |
| fe->ops.ts_bus_ctrl(fe, 0); |
| return ret; |
| } |
| |
| static int dvb_frontend_release(struct inode *inode, struct file *file) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct dvb_frontend *fe = dvbdev->priv; |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| int ret; |
| |
| dprintk ("%s\n", __func__); |
| |
| if ((file->f_flags & O_ACCMODE) != O_RDONLY) |
| fepriv->release_jiffies = jiffies; |
| |
| ret = dvb_generic_release (inode, file); |
| |
| if (dvbdev->users == -1) { |
| if (fepriv->exit == 1) { |
| fops_put(file->f_op); |
| file->f_op = NULL; |
| wake_up(&dvbdev->wait_queue); |
| } |
| if (fe->ops.ts_bus_ctrl) |
| fe->ops.ts_bus_ctrl(fe, 0); |
| } |
| |
| return ret; |
| } |
| |
| static struct file_operations dvb_frontend_fops = { |
| .owner = THIS_MODULE, |
| .ioctl = dvb_generic_ioctl, |
| .poll = dvb_frontend_poll, |
| .open = dvb_frontend_open, |
| .release = dvb_frontend_release |
| }; |
| |
| int dvb_register_frontend(struct dvb_adapter* dvb, |
| struct dvb_frontend* fe) |
| { |
| struct dvb_frontend_private *fepriv; |
| static const struct dvb_device dvbdev_template = { |
| .users = ~0, |
| .writers = 1, |
| .readers = (~0)-1, |
| .fops = &dvb_frontend_fops, |
| .kernel_ioctl = dvb_frontend_ioctl |
| }; |
| |
| dprintk ("%s\n", __func__); |
| |
| if (mutex_lock_interruptible(&frontend_mutex)) |
| return -ERESTARTSYS; |
| |
| fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL); |
| if (fe->frontend_priv == NULL) { |
| mutex_unlock(&frontend_mutex); |
| return -ENOMEM; |
| } |
| fepriv = fe->frontend_priv; |
| |
| init_MUTEX (&fepriv->sem); |
| init_waitqueue_head (&fepriv->wait_queue); |
| init_waitqueue_head (&fepriv->events.wait_queue); |
| mutex_init(&fepriv->events.mtx); |
| fe->dvb = dvb; |
| fepriv->inversion = INVERSION_OFF; |
| |
| printk ("DVB: registering frontend %i (%s)...\n", |
| fe->dvb->num, |
| fe->ops.info.name); |
| |
| dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, |
| fe, DVB_DEVICE_FRONTEND); |
| |
| mutex_unlock(&frontend_mutex); |
| return 0; |
| } |
| EXPORT_SYMBOL(dvb_register_frontend); |
| |
| int dvb_unregister_frontend(struct dvb_frontend* fe) |
| { |
| struct dvb_frontend_private *fepriv = fe->frontend_priv; |
| dprintk ("%s\n", __func__); |
| |
| mutex_lock(&frontend_mutex); |
| dvb_frontend_stop (fe); |
| mutex_unlock(&frontend_mutex); |
| |
| if (fepriv->dvbdev->users < -1) |
| wait_event(fepriv->dvbdev->wait_queue, |
| fepriv->dvbdev->users==-1); |
| |
| mutex_lock(&frontend_mutex); |
| dvb_unregister_device (fepriv->dvbdev); |
| |
| /* fe is invalid now */ |
| kfree(fepriv); |
| mutex_unlock(&frontend_mutex); |
| return 0; |
| } |
| EXPORT_SYMBOL(dvb_unregister_frontend); |
| |
| #ifdef CONFIG_MEDIA_ATTACH |
| void dvb_frontend_detach(struct dvb_frontend* fe) |
| { |
| void *ptr; |
| |
| if (fe->ops.release_sec) { |
| fe->ops.release_sec(fe); |
| symbol_put_addr(fe->ops.release_sec); |
| } |
| if (fe->ops.tuner_ops.release) { |
| fe->ops.tuner_ops.release(fe); |
| symbol_put_addr(fe->ops.tuner_ops.release); |
| } |
| if (fe->ops.analog_ops.release) { |
| fe->ops.analog_ops.release(fe); |
| symbol_put_addr(fe->ops.analog_ops.release); |
| } |
| ptr = (void*)fe->ops.release; |
| if (ptr) { |
| fe->ops.release(fe); |
| symbol_put_addr(ptr); |
| } |
| } |
| #else |
| void dvb_frontend_detach(struct dvb_frontend* fe) |
| { |
| if (fe->ops.release_sec) |
| fe->ops.release_sec(fe); |
| if (fe->ops.tuner_ops.release) |
| fe->ops.tuner_ops.release(fe); |
| if (fe->ops.analog_ops.release) |
| fe->ops.analog_ops.release(fe); |
| if (fe->ops.release) |
| fe->ops.release(fe); |
| } |
| #endif |
| EXPORT_SYMBOL(dvb_frontend_detach); |