| /* |
| * Copyright (c) 2012 Mellanox Technologies. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| */ |
| |
| #include <linux/mlx4/device.h> |
| |
| #include "mlx4_en.h" |
| |
| int mlx4_en_timestamp_config(struct net_device *dev, int tx_type, int rx_filter) |
| { |
| struct mlx4_en_priv *priv = netdev_priv(dev); |
| struct mlx4_en_dev *mdev = priv->mdev; |
| int port_up = 0; |
| int err = 0; |
| |
| if (priv->hwtstamp_config.tx_type == tx_type && |
| priv->hwtstamp_config.rx_filter == rx_filter) |
| return 0; |
| |
| mutex_lock(&mdev->state_lock); |
| if (priv->port_up) { |
| port_up = 1; |
| mlx4_en_stop_port(dev, 1); |
| } |
| |
| mlx4_en_free_resources(priv); |
| |
| en_warn(priv, "Changing Time Stamp configuration\n"); |
| |
| priv->hwtstamp_config.tx_type = tx_type; |
| priv->hwtstamp_config.rx_filter = rx_filter; |
| |
| if (rx_filter != HWTSTAMP_FILTER_NONE) |
| dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX; |
| else |
| dev->features |= NETIF_F_HW_VLAN_CTAG_RX; |
| |
| err = mlx4_en_alloc_resources(priv); |
| if (err) { |
| en_err(priv, "Failed reallocating port resources\n"); |
| goto out; |
| } |
| if (port_up) { |
| err = mlx4_en_start_port(dev); |
| if (err) |
| en_err(priv, "Failed starting port\n"); |
| } |
| |
| out: |
| mutex_unlock(&mdev->state_lock); |
| netdev_features_change(dev); |
| return err; |
| } |
| |
| /* mlx4_en_read_clock - read raw cycle counter (to be used by time counter) |
| */ |
| static cycle_t mlx4_en_read_clock(const struct cyclecounter *tc) |
| { |
| struct mlx4_en_dev *mdev = |
| container_of(tc, struct mlx4_en_dev, cycles); |
| struct mlx4_dev *dev = mdev->dev; |
| |
| return mlx4_read_clock(dev) & tc->mask; |
| } |
| |
| u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe) |
| { |
| u64 hi, lo; |
| struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; |
| |
| lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); |
| hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; |
| |
| return hi | lo; |
| } |
| |
| void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev, |
| struct skb_shared_hwtstamps *hwts, |
| u64 timestamp) |
| { |
| unsigned long flags; |
| u64 nsec; |
| |
| read_lock_irqsave(&mdev->clock_lock, flags); |
| nsec = timecounter_cyc2time(&mdev->clock, timestamp); |
| read_unlock_irqrestore(&mdev->clock_lock, flags); |
| |
| memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); |
| hwts->hwtstamp = ns_to_ktime(nsec); |
| } |
| |
| /** |
| * mlx4_en_remove_timestamp - disable PTP device |
| * @mdev: board private structure |
| * |
| * Stop the PTP support. |
| **/ |
| void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) |
| { |
| if (mdev->ptp_clock) { |
| ptp_clock_unregister(mdev->ptp_clock); |
| mdev->ptp_clock = NULL; |
| mlx4_info(mdev, "removed PHC\n"); |
| } |
| } |
| |
| void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev) |
| { |
| bool timeout = time_is_before_jiffies(mdev->last_overflow_check + |
| mdev->overflow_period); |
| unsigned long flags; |
| |
| if (timeout) { |
| write_lock_irqsave(&mdev->clock_lock, flags); |
| timecounter_read(&mdev->clock); |
| write_unlock_irqrestore(&mdev->clock_lock, flags); |
| mdev->last_overflow_check = jiffies; |
| } |
| } |
| |
| /** |
| * mlx4_en_phc_adjfreq - adjust the frequency of the hardware clock |
| * @ptp: ptp clock structure |
| * @delta: Desired frequency change in parts per billion |
| * |
| * Adjust the frequency of the PHC cycle counter by the indicated delta from |
| * the base frequency. |
| **/ |
| static int mlx4_en_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) |
| { |
| u64 adj; |
| u32 diff, mult; |
| int neg_adj = 0; |
| unsigned long flags; |
| struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, |
| ptp_clock_info); |
| |
| if (delta < 0) { |
| neg_adj = 1; |
| delta = -delta; |
| } |
| mult = mdev->nominal_c_mult; |
| adj = mult; |
| adj *= delta; |
| diff = div_u64(adj, 1000000000ULL); |
| |
| write_lock_irqsave(&mdev->clock_lock, flags); |
| timecounter_read(&mdev->clock); |
| mdev->cycles.mult = neg_adj ? mult - diff : mult + diff; |
| write_unlock_irqrestore(&mdev->clock_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * mlx4_en_phc_adjtime - Shift the time of the hardware clock |
| * @ptp: ptp clock structure |
| * @delta: Desired change in nanoseconds |
| * |
| * Adjust the timer by resetting the timecounter structure. |
| **/ |
| static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) |
| { |
| struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, |
| ptp_clock_info); |
| unsigned long flags; |
| s64 now; |
| |
| write_lock_irqsave(&mdev->clock_lock, flags); |
| now = timecounter_read(&mdev->clock); |
| now += delta; |
| timecounter_init(&mdev->clock, &mdev->cycles, now); |
| write_unlock_irqrestore(&mdev->clock_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * mlx4_en_phc_gettime - Reads the current time from the hardware clock |
| * @ptp: ptp clock structure |
| * @ts: timespec structure to hold the current time value |
| * |
| * Read the timecounter and return the correct value in ns after converting |
| * it into a struct timespec. |
| **/ |
| static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp, struct timespec *ts) |
| { |
| struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, |
| ptp_clock_info); |
| unsigned long flags; |
| u32 remainder; |
| u64 ns; |
| |
| write_lock_irqsave(&mdev->clock_lock, flags); |
| ns = timecounter_read(&mdev->clock); |
| write_unlock_irqrestore(&mdev->clock_lock, flags); |
| |
| ts->tv_sec = div_u64_rem(ns, NSEC_PER_SEC, &remainder); |
| ts->tv_nsec = remainder; |
| |
| return 0; |
| } |
| |
| /** |
| * mlx4_en_phc_settime - Set the current time on the hardware clock |
| * @ptp: ptp clock structure |
| * @ts: timespec containing the new time for the cycle counter |
| * |
| * Reset the timecounter to use a new base value instead of the kernel |
| * wall timer value. |
| **/ |
| static int mlx4_en_phc_settime(struct ptp_clock_info *ptp, |
| const struct timespec *ts) |
| { |
| struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, |
| ptp_clock_info); |
| u64 ns = timespec_to_ns(ts); |
| unsigned long flags; |
| |
| /* reset the timecounter */ |
| write_lock_irqsave(&mdev->clock_lock, flags); |
| timecounter_init(&mdev->clock, &mdev->cycles, ns); |
| write_unlock_irqrestore(&mdev->clock_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * mlx4_en_phc_enable - enable or disable an ancillary feature |
| * @ptp: ptp clock structure |
| * @request: Desired resource to enable or disable |
| * @on: Caller passes one to enable or zero to disable |
| * |
| * Enable (or disable) ancillary features of the PHC subsystem. |
| * Currently, no ancillary features are supported. |
| **/ |
| static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp, |
| struct ptp_clock_request __always_unused *request, |
| int __always_unused on) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| static const struct ptp_clock_info mlx4_en_ptp_clock_info = { |
| .owner = THIS_MODULE, |
| .max_adj = 100000000, |
| .n_alarm = 0, |
| .n_ext_ts = 0, |
| .n_per_out = 0, |
| .n_pins = 0, |
| .pps = 0, |
| .adjfreq = mlx4_en_phc_adjfreq, |
| .adjtime = mlx4_en_phc_adjtime, |
| .gettime = mlx4_en_phc_gettime, |
| .settime = mlx4_en_phc_settime, |
| .enable = mlx4_en_phc_enable, |
| }; |
| |
| void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) |
| { |
| struct mlx4_dev *dev = mdev->dev; |
| unsigned long flags; |
| u64 ns; |
| |
| rwlock_init(&mdev->clock_lock); |
| |
| memset(&mdev->cycles, 0, sizeof(mdev->cycles)); |
| mdev->cycles.read = mlx4_en_read_clock; |
| mdev->cycles.mask = CLOCKSOURCE_MASK(48); |
| /* Using shift to make calculation more accurate. Since current HW |
| * clock frequency is 427 MHz, and cycles are given using a 48 bits |
| * register, the biggest shift when calculating using u64, is 14 |
| * (max_cycles * multiplier < 2^64) |
| */ |
| mdev->cycles.shift = 14; |
| mdev->cycles.mult = |
| clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); |
| mdev->nominal_c_mult = mdev->cycles.mult; |
| |
| write_lock_irqsave(&mdev->clock_lock, flags); |
| timecounter_init(&mdev->clock, &mdev->cycles, |
| ktime_to_ns(ktime_get_real())); |
| write_unlock_irqrestore(&mdev->clock_lock, flags); |
| |
| /* Calculate period in seconds to call the overflow watchdog - to make |
| * sure counter is checked at least once every wrap around. |
| */ |
| ns = cyclecounter_cyc2ns(&mdev->cycles, mdev->cycles.mask); |
| do_div(ns, NSEC_PER_SEC / 2 / HZ); |
| mdev->overflow_period = ns; |
| |
| /* Configure the PHC */ |
| mdev->ptp_clock_info = mlx4_en_ptp_clock_info; |
| snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp"); |
| |
| mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info, |
| &mdev->pdev->dev); |
| if (IS_ERR(mdev->ptp_clock)) { |
| mdev->ptp_clock = NULL; |
| mlx4_err(mdev, "ptp_clock_register failed\n"); |
| } else { |
| mlx4_info(mdev, "registered PHC clock\n"); |
| } |
| |
| } |