| /* |
| * Copyright (c) 2005-2011 Atheros Communications Inc. |
| * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _HW_H_ |
| #define _HW_H_ |
| |
| #include "targaddrs.h" |
| |
| /* QCA988X 1.0 definitions (unsupported) */ |
| #define QCA988X_HW_1_0_CHIP_ID_REV 0x0 |
| |
| /* QCA988X 2.0 definitions */ |
| #define QCA988X_HW_2_0_VERSION 0x4100016c |
| #define QCA988X_HW_2_0_CHIP_ID_REV 0x2 |
| #define QCA988X_HW_2_0_FW_DIR "ath10k/QCA988X/hw2.0" |
| #define QCA988X_HW_2_0_FW_FILE "firmware.bin" |
| #define QCA988X_HW_2_0_FW_2_FILE "firmware-2.bin" |
| #define QCA988X_HW_2_0_OTP_FILE "otp.bin" |
| #define QCA988X_HW_2_0_BOARD_DATA_FILE "board.bin" |
| #define QCA988X_HW_2_0_PATCH_LOAD_ADDR 0x1234 |
| |
| #define ATH10K_FW_API2_FILE "firmware-2.bin" |
| |
| /* includes also the null byte */ |
| #define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K" |
| |
| struct ath10k_fw_ie { |
| __le32 id; |
| __le32 len; |
| u8 data[0]; |
| }; |
| |
| enum ath10k_fw_ie_type { |
| ATH10K_FW_IE_FW_VERSION = 0, |
| ATH10K_FW_IE_TIMESTAMP = 1, |
| ATH10K_FW_IE_FEATURES = 2, |
| ATH10K_FW_IE_FW_IMAGE = 3, |
| ATH10K_FW_IE_OTP_IMAGE = 4, |
| }; |
| |
| /* Known pecularities: |
| * - current FW doesn't support raw rx mode (last tested v599) |
| * - current FW dumps upon raw tx mode (last tested v599) |
| * - raw appears in nwifi decap, raw and nwifi appear in ethernet decap |
| * - raw have FCS, nwifi doesn't |
| * - ethernet frames have 802.11 header decapped and parts (base hdr, cipher |
| * param, llc/snap) are aligned to 4byte boundaries each */ |
| enum ath10k_hw_txrx_mode { |
| ATH10K_HW_TXRX_RAW = 0, |
| ATH10K_HW_TXRX_NATIVE_WIFI = 1, |
| ATH10K_HW_TXRX_ETHERNET = 2, |
| |
| /* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */ |
| ATH10K_HW_TXRX_MGMT = 3, |
| }; |
| |
| enum ath10k_mcast2ucast_mode { |
| ATH10K_MCAST2UCAST_DISABLED = 0, |
| ATH10K_MCAST2UCAST_ENABLED = 1, |
| }; |
| |
| /* Target specific defines for MAIN firmware */ |
| #define TARGET_NUM_VDEVS 8 |
| #define TARGET_NUM_PEER_AST 2 |
| #define TARGET_NUM_WDS_ENTRIES 32 |
| #define TARGET_DMA_BURST_SIZE 0 |
| #define TARGET_MAC_AGGR_DELIM 0 |
| #define TARGET_AST_SKID_LIMIT 16 |
| #define TARGET_NUM_PEERS 16 |
| #define TARGET_NUM_OFFLOAD_PEERS 0 |
| #define TARGET_NUM_OFFLOAD_REORDER_BUFS 0 |
| #define TARGET_NUM_PEER_KEYS 2 |
| #define TARGET_NUM_TIDS (2 * ((TARGET_NUM_PEERS) + (TARGET_NUM_VDEVS))) |
| #define TARGET_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) |
| #define TARGET_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) |
| #define TARGET_RX_TIMEOUT_LO_PRI 100 |
| #define TARGET_RX_TIMEOUT_HI_PRI 40 |
| |
| /* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and |
| * avoid a very expensive re-alignment in mac80211. */ |
| #define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI |
| |
| #define TARGET_SCAN_MAX_PENDING_REQS 4 |
| #define TARGET_BMISS_OFFLOAD_MAX_VDEV 3 |
| #define TARGET_ROAM_OFFLOAD_MAX_VDEV 3 |
| #define TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES 8 |
| #define TARGET_GTK_OFFLOAD_MAX_VDEV 3 |
| #define TARGET_NUM_MCAST_GROUPS 0 |
| #define TARGET_NUM_MCAST_TABLE_ELEMS 0 |
| #define TARGET_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED |
| #define TARGET_TX_DBG_LOG_SIZE 1024 |
| #define TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 0 |
| #define TARGET_VOW_CONFIG 0 |
| #define TARGET_NUM_MSDU_DESC (1024 + 400) |
| #define TARGET_MAX_FRAG_ENTRIES 0 |
| |
| /* Target specific defines for 10.X firmware */ |
| #define TARGET_10X_NUM_VDEVS 16 |
| #define TARGET_10X_NUM_PEER_AST 2 |
| #define TARGET_10X_NUM_WDS_ENTRIES 32 |
| #define TARGET_10X_DMA_BURST_SIZE 0 |
| #define TARGET_10X_MAC_AGGR_DELIM 0 |
| #define TARGET_10X_AST_SKID_LIMIT 16 |
| #define TARGET_10X_NUM_PEERS (128 + (TARGET_10X_NUM_VDEVS)) |
| #define TARGET_10X_NUM_PEERS_MAX 128 |
| #define TARGET_10X_NUM_OFFLOAD_PEERS 0 |
| #define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS 0 |
| #define TARGET_10X_NUM_PEER_KEYS 2 |
| #define TARGET_10X_NUM_TIDS 256 |
| #define TARGET_10X_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) |
| #define TARGET_10X_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) |
| #define TARGET_10X_RX_TIMEOUT_LO_PRI 100 |
| #define TARGET_10X_RX_TIMEOUT_HI_PRI 40 |
| #define TARGET_10X_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI |
| #define TARGET_10X_SCAN_MAX_PENDING_REQS 4 |
| #define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV 2 |
| #define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV 2 |
| #define TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES 8 |
| #define TARGET_10X_GTK_OFFLOAD_MAX_VDEV 3 |
| #define TARGET_10X_NUM_MCAST_GROUPS 0 |
| #define TARGET_10X_NUM_MCAST_TABLE_ELEMS 0 |
| #define TARGET_10X_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED |
| #define TARGET_10X_TX_DBG_LOG_SIZE 1024 |
| #define TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 |
| #define TARGET_10X_VOW_CONFIG 0 |
| #define TARGET_10X_NUM_MSDU_DESC (1024 + 400) |
| #define TARGET_10X_MAX_FRAG_ENTRIES 0 |
| |
| /* Number of Copy Engines supported */ |
| #define CE_COUNT 8 |
| |
| /* |
| * Total number of PCIe MSI interrupts requested for all interrupt sources. |
| * PCIe standard forces this to be a power of 2. |
| * Some Host OS's limit MSI requests that can be granted to 8 |
| * so for now we abide by this limit and avoid requesting more |
| * than that. |
| */ |
| #define MSI_NUM_REQUEST_LOG2 3 |
| #define MSI_NUM_REQUEST (1<<MSI_NUM_REQUEST_LOG2) |
| |
| /* |
| * Granted MSIs are assigned as follows: |
| * Firmware uses the first |
| * Remaining MSIs, if any, are used by Copy Engines |
| * This mapping is known to both Target firmware and Host software. |
| * It may be changed as long as Host and Target are kept in sync. |
| */ |
| /* MSI for firmware (errors, etc.) */ |
| #define MSI_ASSIGN_FW 0 |
| |
| /* MSIs for Copy Engines */ |
| #define MSI_ASSIGN_CE_INITIAL 1 |
| #define MSI_ASSIGN_CE_MAX 7 |
| |
| /* as of IP3.7.1 */ |
| #define RTC_STATE_V_ON 3 |
| |
| #define RTC_STATE_COLD_RESET_MASK 0x00000400 |
| #define RTC_STATE_V_LSB 0 |
| #define RTC_STATE_V_MASK 0x00000007 |
| #define RTC_STATE_ADDRESS 0x0000 |
| #define PCIE_SOC_WAKE_V_MASK 0x00000001 |
| #define PCIE_SOC_WAKE_ADDRESS 0x0004 |
| #define PCIE_SOC_WAKE_RESET 0x00000000 |
| #define SOC_GLOBAL_RESET_ADDRESS 0x0008 |
| |
| #define RTC_SOC_BASE_ADDRESS 0x00004000 |
| #define RTC_WMAC_BASE_ADDRESS 0x00005000 |
| #define MAC_COEX_BASE_ADDRESS 0x00006000 |
| #define BT_COEX_BASE_ADDRESS 0x00007000 |
| #define SOC_PCIE_BASE_ADDRESS 0x00008000 |
| #define SOC_CORE_BASE_ADDRESS 0x00009000 |
| #define WLAN_UART_BASE_ADDRESS 0x0000c000 |
| #define WLAN_SI_BASE_ADDRESS 0x00010000 |
| #define WLAN_GPIO_BASE_ADDRESS 0x00014000 |
| #define WLAN_ANALOG_INTF_BASE_ADDRESS 0x0001c000 |
| #define WLAN_MAC_BASE_ADDRESS 0x00020000 |
| #define EFUSE_BASE_ADDRESS 0x00030000 |
| #define FPGA_REG_BASE_ADDRESS 0x00039000 |
| #define WLAN_UART2_BASE_ADDRESS 0x00054c00 |
| #define CE_WRAPPER_BASE_ADDRESS 0x00057000 |
| #define CE0_BASE_ADDRESS 0x00057400 |
| #define CE1_BASE_ADDRESS 0x00057800 |
| #define CE2_BASE_ADDRESS 0x00057c00 |
| #define CE3_BASE_ADDRESS 0x00058000 |
| #define CE4_BASE_ADDRESS 0x00058400 |
| #define CE5_BASE_ADDRESS 0x00058800 |
| #define CE6_BASE_ADDRESS 0x00058c00 |
| #define CE7_BASE_ADDRESS 0x00059000 |
| #define DBI_BASE_ADDRESS 0x00060000 |
| #define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS 0x0006c000 |
| #define PCIE_LOCAL_BASE_ADDRESS 0x00080000 |
| |
| #define SOC_RESET_CONTROL_ADDRESS 0x00000000 |
| #define SOC_RESET_CONTROL_OFFSET 0x00000000 |
| #define SOC_RESET_CONTROL_SI0_RST_MASK 0x00000001 |
| #define SOC_RESET_CONTROL_CE_RST_MASK 0x00040000 |
| #define SOC_RESET_CONTROL_CPU_WARM_RST_MASK 0x00000040 |
| #define SOC_CPU_CLOCK_OFFSET 0x00000020 |
| #define SOC_CPU_CLOCK_STANDARD_LSB 0 |
| #define SOC_CPU_CLOCK_STANDARD_MASK 0x00000003 |
| #define SOC_CLOCK_CONTROL_OFFSET 0x00000028 |
| #define SOC_CLOCK_CONTROL_SI0_CLK_MASK 0x00000001 |
| #define SOC_SYSTEM_SLEEP_OFFSET 0x000000c4 |
| #define SOC_LPO_CAL_OFFSET 0x000000e0 |
| #define SOC_LPO_CAL_ENABLE_LSB 20 |
| #define SOC_LPO_CAL_ENABLE_MASK 0x00100000 |
| #define SOC_LF_TIMER_CONTROL0_ADDRESS 0x00000050 |
| #define SOC_LF_TIMER_CONTROL0_ENABLE_MASK 0x00000004 |
| |
| #define SOC_CHIP_ID_ADDRESS 0x000000ec |
| #define SOC_CHIP_ID_REV_LSB 8 |
| #define SOC_CHIP_ID_REV_MASK 0x00000f00 |
| |
| #define WLAN_RESET_CONTROL_COLD_RST_MASK 0x00000008 |
| #define WLAN_RESET_CONTROL_WARM_RST_MASK 0x00000004 |
| #define WLAN_SYSTEM_SLEEP_DISABLE_LSB 0 |
| #define WLAN_SYSTEM_SLEEP_DISABLE_MASK 0x00000001 |
| |
| #define WLAN_GPIO_PIN0_ADDRESS 0x00000028 |
| #define WLAN_GPIO_PIN0_CONFIG_MASK 0x00007800 |
| #define WLAN_GPIO_PIN1_ADDRESS 0x0000002c |
| #define WLAN_GPIO_PIN1_CONFIG_MASK 0x00007800 |
| #define WLAN_GPIO_PIN10_ADDRESS 0x00000050 |
| #define WLAN_GPIO_PIN11_ADDRESS 0x00000054 |
| #define WLAN_GPIO_PIN12_ADDRESS 0x00000058 |
| #define WLAN_GPIO_PIN13_ADDRESS 0x0000005c |
| |
| #define CLOCK_GPIO_OFFSET 0xffffffff |
| #define CLOCK_GPIO_BT_CLK_OUT_EN_LSB 0 |
| #define CLOCK_GPIO_BT_CLK_OUT_EN_MASK 0 |
| |
| #define SI_CONFIG_OFFSET 0x00000000 |
| #define SI_CONFIG_BIDIR_OD_DATA_LSB 18 |
| #define SI_CONFIG_BIDIR_OD_DATA_MASK 0x00040000 |
| #define SI_CONFIG_I2C_LSB 16 |
| #define SI_CONFIG_I2C_MASK 0x00010000 |
| #define SI_CONFIG_POS_SAMPLE_LSB 7 |
| #define SI_CONFIG_POS_SAMPLE_MASK 0x00000080 |
| #define SI_CONFIG_INACTIVE_DATA_LSB 5 |
| #define SI_CONFIG_INACTIVE_DATA_MASK 0x00000020 |
| #define SI_CONFIG_INACTIVE_CLK_LSB 4 |
| #define SI_CONFIG_INACTIVE_CLK_MASK 0x00000010 |
| #define SI_CONFIG_DIVIDER_LSB 0 |
| #define SI_CONFIG_DIVIDER_MASK 0x0000000f |
| #define SI_CS_OFFSET 0x00000004 |
| #define SI_CS_DONE_ERR_MASK 0x00000400 |
| #define SI_CS_DONE_INT_MASK 0x00000200 |
| #define SI_CS_START_LSB 8 |
| #define SI_CS_START_MASK 0x00000100 |
| #define SI_CS_RX_CNT_LSB 4 |
| #define SI_CS_RX_CNT_MASK 0x000000f0 |
| #define SI_CS_TX_CNT_LSB 0 |
| #define SI_CS_TX_CNT_MASK 0x0000000f |
| |
| #define SI_TX_DATA0_OFFSET 0x00000008 |
| #define SI_TX_DATA1_OFFSET 0x0000000c |
| #define SI_RX_DATA0_OFFSET 0x00000010 |
| #define SI_RX_DATA1_OFFSET 0x00000014 |
| |
| #define CORE_CTRL_CPU_INTR_MASK 0x00002000 |
| #define CORE_CTRL_ADDRESS 0x0000 |
| #define PCIE_INTR_ENABLE_ADDRESS 0x0008 |
| #define PCIE_INTR_CAUSE_ADDRESS 0x000c |
| #define PCIE_INTR_CLR_ADDRESS 0x0014 |
| #define SCRATCH_3_ADDRESS 0x0030 |
| #define CPU_INTR_ADDRESS 0x0010 |
| |
| /* Firmware indications to the Host via SCRATCH_3 register. */ |
| #define FW_INDICATOR_ADDRESS (SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS) |
| #define FW_IND_EVENT_PENDING 1 |
| #define FW_IND_INITIALIZED 2 |
| |
| /* HOST_REG interrupt from firmware */ |
| #define PCIE_INTR_FIRMWARE_MASK 0x00000400 |
| #define PCIE_INTR_CE_MASK_ALL 0x0007f800 |
| |
| #define DRAM_BASE_ADDRESS 0x00400000 |
| |
| #define MISSING 0 |
| |
| #define SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET |
| #define WLAN_SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET |
| #define WLAN_RESET_CONTROL_OFFSET SOC_RESET_CONTROL_OFFSET |
| #define CLOCK_CONTROL_OFFSET SOC_CLOCK_CONTROL_OFFSET |
| #define CLOCK_CONTROL_SI0_CLK_MASK SOC_CLOCK_CONTROL_SI0_CLK_MASK |
| #define RESET_CONTROL_MBOX_RST_MASK MISSING |
| #define RESET_CONTROL_SI0_RST_MASK SOC_RESET_CONTROL_SI0_RST_MASK |
| #define GPIO_BASE_ADDRESS WLAN_GPIO_BASE_ADDRESS |
| #define GPIO_PIN0_OFFSET WLAN_GPIO_PIN0_ADDRESS |
| #define GPIO_PIN1_OFFSET WLAN_GPIO_PIN1_ADDRESS |
| #define GPIO_PIN0_CONFIG_MASK WLAN_GPIO_PIN0_CONFIG_MASK |
| #define GPIO_PIN1_CONFIG_MASK WLAN_GPIO_PIN1_CONFIG_MASK |
| #define SI_BASE_ADDRESS WLAN_SI_BASE_ADDRESS |
| #define SCRATCH_BASE_ADDRESS SOC_CORE_BASE_ADDRESS |
| #define LOCAL_SCRATCH_OFFSET 0x18 |
| #define CPU_CLOCK_OFFSET SOC_CPU_CLOCK_OFFSET |
| #define LPO_CAL_OFFSET SOC_LPO_CAL_OFFSET |
| #define GPIO_PIN10_OFFSET WLAN_GPIO_PIN10_ADDRESS |
| #define GPIO_PIN11_OFFSET WLAN_GPIO_PIN11_ADDRESS |
| #define GPIO_PIN12_OFFSET WLAN_GPIO_PIN12_ADDRESS |
| #define GPIO_PIN13_OFFSET WLAN_GPIO_PIN13_ADDRESS |
| #define CPU_CLOCK_STANDARD_LSB SOC_CPU_CLOCK_STANDARD_LSB |
| #define CPU_CLOCK_STANDARD_MASK SOC_CPU_CLOCK_STANDARD_MASK |
| #define LPO_CAL_ENABLE_LSB SOC_LPO_CAL_ENABLE_LSB |
| #define LPO_CAL_ENABLE_MASK SOC_LPO_CAL_ENABLE_MASK |
| #define ANALOG_INTF_BASE_ADDRESS WLAN_ANALOG_INTF_BASE_ADDRESS |
| #define MBOX_BASE_ADDRESS MISSING |
| #define INT_STATUS_ENABLE_ERROR_LSB MISSING |
| #define INT_STATUS_ENABLE_ERROR_MASK MISSING |
| #define INT_STATUS_ENABLE_CPU_LSB MISSING |
| #define INT_STATUS_ENABLE_CPU_MASK MISSING |
| #define INT_STATUS_ENABLE_COUNTER_LSB MISSING |
| #define INT_STATUS_ENABLE_COUNTER_MASK MISSING |
| #define INT_STATUS_ENABLE_MBOX_DATA_LSB MISSING |
| #define INT_STATUS_ENABLE_MBOX_DATA_MASK MISSING |
| #define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB MISSING |
| #define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK MISSING |
| #define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB MISSING |
| #define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK MISSING |
| #define COUNTER_INT_STATUS_ENABLE_BIT_LSB MISSING |
| #define COUNTER_INT_STATUS_ENABLE_BIT_MASK MISSING |
| #define INT_STATUS_ENABLE_ADDRESS MISSING |
| #define CPU_INT_STATUS_ENABLE_BIT_LSB MISSING |
| #define CPU_INT_STATUS_ENABLE_BIT_MASK MISSING |
| #define HOST_INT_STATUS_ADDRESS MISSING |
| #define CPU_INT_STATUS_ADDRESS MISSING |
| #define ERROR_INT_STATUS_ADDRESS MISSING |
| #define ERROR_INT_STATUS_WAKEUP_MASK MISSING |
| #define ERROR_INT_STATUS_WAKEUP_LSB MISSING |
| #define ERROR_INT_STATUS_RX_UNDERFLOW_MASK MISSING |
| #define ERROR_INT_STATUS_RX_UNDERFLOW_LSB MISSING |
| #define ERROR_INT_STATUS_TX_OVERFLOW_MASK MISSING |
| #define ERROR_INT_STATUS_TX_OVERFLOW_LSB MISSING |
| #define COUNT_DEC_ADDRESS MISSING |
| #define HOST_INT_STATUS_CPU_MASK MISSING |
| #define HOST_INT_STATUS_CPU_LSB MISSING |
| #define HOST_INT_STATUS_ERROR_MASK MISSING |
| #define HOST_INT_STATUS_ERROR_LSB MISSING |
| #define HOST_INT_STATUS_COUNTER_MASK MISSING |
| #define HOST_INT_STATUS_COUNTER_LSB MISSING |
| #define RX_LOOKAHEAD_VALID_ADDRESS MISSING |
| #define WINDOW_DATA_ADDRESS MISSING |
| #define WINDOW_READ_ADDR_ADDRESS MISSING |
| #define WINDOW_WRITE_ADDR_ADDRESS MISSING |
| |
| #define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB) |
| |
| #endif /* _HW_H_ */ |
