|  | /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 and | 
|  | * only version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | 
|  | * 02110-1301, USA. | 
|  | */ | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/i2c/sx150x.h> | 
|  |  | 
|  | struct sx150x_device_data { | 
|  | u8 reg_pullup; | 
|  | u8 reg_pulldn; | 
|  | u8 reg_drain; | 
|  | u8 reg_polarity; | 
|  | u8 reg_dir; | 
|  | u8 reg_data; | 
|  | u8 reg_irq_mask; | 
|  | u8 reg_irq_src; | 
|  | u8 reg_sense; | 
|  | u8 reg_clock; | 
|  | u8 reg_misc; | 
|  | u8 reg_reset; | 
|  | u8 ngpios; | 
|  | }; | 
|  |  | 
|  | struct sx150x_chip { | 
|  | struct gpio_chip                 gpio_chip; | 
|  | struct i2c_client               *client; | 
|  | const struct sx150x_device_data *dev_cfg; | 
|  | int                              irq_summary; | 
|  | int                              irq_base; | 
|  | u32                              irq_sense; | 
|  | unsigned long                    irq_set_type_pending; | 
|  | struct irq_chip                  irq_chip; | 
|  | struct mutex                     lock; | 
|  | }; | 
|  |  | 
|  | static const struct sx150x_device_data sx150x_devices[] = { | 
|  | [0] = { /* sx1508q */ | 
|  | .reg_pullup   = 0x03, | 
|  | .reg_pulldn   = 0x04, | 
|  | .reg_drain    = 0x05, | 
|  | .reg_polarity = 0x06, | 
|  | .reg_dir      = 0x07, | 
|  | .reg_data     = 0x08, | 
|  | .reg_irq_mask = 0x09, | 
|  | .reg_irq_src  = 0x0c, | 
|  | .reg_sense    = 0x0b, | 
|  | .reg_clock    = 0x0f, | 
|  | .reg_misc     = 0x10, | 
|  | .reg_reset    = 0x7d, | 
|  | .ngpios       = 8 | 
|  | }, | 
|  | [1] = { /* sx1509q */ | 
|  | .reg_pullup   = 0x07, | 
|  | .reg_pulldn   = 0x09, | 
|  | .reg_drain    = 0x0b, | 
|  | .reg_polarity = 0x0d, | 
|  | .reg_dir      = 0x0f, | 
|  | .reg_data     = 0x11, | 
|  | .reg_irq_mask = 0x13, | 
|  | .reg_irq_src  = 0x19, | 
|  | .reg_sense    = 0x17, | 
|  | .reg_clock    = 0x1e, | 
|  | .reg_misc     = 0x1f, | 
|  | .reg_reset    = 0x7d, | 
|  | .ngpios       = 16 | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct i2c_device_id sx150x_id[] = { | 
|  | {"sx1508q", 0}, | 
|  | {"sx1509q", 1}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, sx150x_id); | 
|  |  | 
|  | static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val) | 
|  | { | 
|  | s32 err = i2c_smbus_write_byte_data(client, reg, val); | 
|  |  | 
|  | if (err < 0) | 
|  | dev_warn(&client->dev, | 
|  | "i2c write fail: can't write %02x to %02x: %d\n", | 
|  | val, reg, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) | 
|  | { | 
|  | s32 err = i2c_smbus_read_byte_data(client, reg); | 
|  |  | 
|  | if (err >= 0) | 
|  | *val = err; | 
|  | else | 
|  | dev_warn(&client->dev, | 
|  | "i2c read fail: can't read from %02x: %d\n", | 
|  | reg, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset) | 
|  | { | 
|  | return (chip->dev_cfg->ngpios == offset); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * These utility functions solve the common problem of locating and setting | 
|  | * configuration bits.  Configuration bits are grouped into registers | 
|  | * whose indexes increase downwards.  For example, with eight-bit registers, | 
|  | * sixteen gpios would have their config bits grouped in the following order: | 
|  | * REGISTER N-1 [ f e d c b a 9 8 ] | 
|  | *          N   [ 7 6 5 4 3 2 1 0 ] | 
|  | * | 
|  | * For multi-bit configurations, the pattern gets wider: | 
|  | * REGISTER N-3 [ f f e e d d c c ] | 
|  | *          N-2 [ b b a a 9 9 8 8 ] | 
|  | *          N-1 [ 7 7 6 6 5 5 4 4 ] | 
|  | *          N   [ 3 3 2 2 1 1 0 0 ] | 
|  | * | 
|  | * Given the address of the starting register 'N', the index of the gpio | 
|  | * whose configuration we seek to change, and the width in bits of that | 
|  | * configuration, these functions allow us to locate the correct | 
|  | * register and mask the correct bits. | 
|  | */ | 
|  | static inline void sx150x_find_cfg(u8 offset, u8 width, | 
|  | u8 *reg, u8 *mask, u8 *shift) | 
|  | { | 
|  | *reg   -= offset * width / 8; | 
|  | *mask   = (1 << width) - 1; | 
|  | *shift  = (offset * width) % 8; | 
|  | *mask <<= *shift; | 
|  | } | 
|  |  | 
|  | static s32 sx150x_write_cfg(struct sx150x_chip *chip, | 
|  | u8 offset, u8 width, u8 reg, u8 val) | 
|  | { | 
|  | u8  mask; | 
|  | u8  data; | 
|  | u8  shift; | 
|  | s32 err; | 
|  |  | 
|  | sx150x_find_cfg(offset, width, ®, &mask, &shift); | 
|  | err = sx150x_i2c_read(chip->client, reg, &data); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | data &= ~mask; | 
|  | data |= (val << shift) & mask; | 
|  | return sx150x_i2c_write(chip->client, reg, data); | 
|  | } | 
|  |  | 
|  | static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset) | 
|  | { | 
|  | u8  reg = chip->dev_cfg->reg_data; | 
|  | u8  mask; | 
|  | u8  data; | 
|  | u8  shift; | 
|  | s32 err; | 
|  |  | 
|  | sx150x_find_cfg(offset, 1, ®, &mask, &shift); | 
|  | err = sx150x_i2c_read(chip->client, reg, &data); | 
|  | if (err >= 0) | 
|  | err = (data & mask) != 0 ? 1 : 0; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void sx150x_set_oscio(struct sx150x_chip *chip, int val) | 
|  | { | 
|  | sx150x_i2c_write(chip->client, | 
|  | chip->dev_cfg->reg_clock, | 
|  | (val ? 0x1f : 0x10)); | 
|  | } | 
|  |  | 
|  | static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val) | 
|  | { | 
|  | sx150x_write_cfg(chip, | 
|  | offset, | 
|  | 1, | 
|  | chip->dev_cfg->reg_data, | 
|  | (val ? 1 : 0)); | 
|  | } | 
|  |  | 
|  | static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset) | 
|  | { | 
|  | return sx150x_write_cfg(chip, | 
|  | offset, | 
|  | 1, | 
|  | chip->dev_cfg->reg_dir, | 
|  | 1); | 
|  | } | 
|  |  | 
|  | static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = sx150x_write_cfg(chip, | 
|  | offset, | 
|  | 1, | 
|  | chip->dev_cfg->reg_data, | 
|  | (val ? 1 : 0)); | 
|  | if (err >= 0) | 
|  | err = sx150x_write_cfg(chip, | 
|  | offset, | 
|  | 1, | 
|  | chip->dev_cfg->reg_dir, | 
|  | 0); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset) | 
|  | { | 
|  | struct sx150x_chip *chip; | 
|  | int status = -EINVAL; | 
|  |  | 
|  | chip = container_of(gc, struct sx150x_chip, gpio_chip); | 
|  |  | 
|  | if (!offset_is_oscio(chip, offset)) { | 
|  | mutex_lock(&chip->lock); | 
|  | status = sx150x_get_io(chip, offset); | 
|  | mutex_unlock(&chip->lock); | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val) | 
|  | { | 
|  | struct sx150x_chip *chip; | 
|  |  | 
|  | chip = container_of(gc, struct sx150x_chip, gpio_chip); | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | if (offset_is_oscio(chip, offset)) | 
|  | sx150x_set_oscio(chip, val); | 
|  | else | 
|  | sx150x_set_io(chip, offset, val); | 
|  | mutex_unlock(&chip->lock); | 
|  | } | 
|  |  | 
|  | static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset) | 
|  | { | 
|  | struct sx150x_chip *chip; | 
|  | int status = -EINVAL; | 
|  |  | 
|  | chip = container_of(gc, struct sx150x_chip, gpio_chip); | 
|  |  | 
|  | if (!offset_is_oscio(chip, offset)) { | 
|  | mutex_lock(&chip->lock); | 
|  | status = sx150x_io_input(chip, offset); | 
|  | mutex_unlock(&chip->lock); | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int sx150x_gpio_direction_output(struct gpio_chip *gc, | 
|  | unsigned offset, | 
|  | int val) | 
|  | { | 
|  | struct sx150x_chip *chip; | 
|  | int status = 0; | 
|  |  | 
|  | chip = container_of(gc, struct sx150x_chip, gpio_chip); | 
|  |  | 
|  | if (!offset_is_oscio(chip, offset)) { | 
|  | mutex_lock(&chip->lock); | 
|  | status = sx150x_io_output(chip, offset, val); | 
|  | mutex_unlock(&chip->lock); | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int sx150x_gpio_to_irq(struct gpio_chip *gc, unsigned offset) | 
|  | { | 
|  | struct sx150x_chip *chip; | 
|  |  | 
|  | chip = container_of(gc, struct sx150x_chip, gpio_chip); | 
|  |  | 
|  | if (offset >= chip->dev_cfg->ngpios) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (chip->irq_base < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | return chip->irq_base + offset; | 
|  | } | 
|  |  | 
|  | static void sx150x_irq_mask(unsigned int irq) | 
|  | { | 
|  | struct irq_chip *ic = get_irq_chip(irq); | 
|  | struct sx150x_chip *chip; | 
|  | unsigned n; | 
|  |  | 
|  | chip = container_of(ic, struct sx150x_chip, irq_chip); | 
|  | n = irq - chip->irq_base; | 
|  |  | 
|  | sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1); | 
|  | sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0); | 
|  | } | 
|  |  | 
|  | static void sx150x_irq_unmask(unsigned int irq) | 
|  | { | 
|  | struct irq_chip *ic = get_irq_chip(irq); | 
|  | struct sx150x_chip *chip; | 
|  | unsigned n; | 
|  |  | 
|  | chip = container_of(ic, struct sx150x_chip, irq_chip); | 
|  | n = irq - chip->irq_base; | 
|  |  | 
|  | sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0); | 
|  | sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, | 
|  | chip->irq_sense >> (n * 2)); | 
|  | } | 
|  |  | 
|  | static int sx150x_irq_set_type(unsigned int irq, unsigned int flow_type) | 
|  | { | 
|  | struct irq_chip *ic = get_irq_chip(irq); | 
|  | struct sx150x_chip *chip; | 
|  | unsigned n, val = 0; | 
|  |  | 
|  | if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) | 
|  | return -EINVAL; | 
|  |  | 
|  | chip = container_of(ic, struct sx150x_chip, irq_chip); | 
|  | n = irq - chip->irq_base; | 
|  |  | 
|  | if (flow_type & IRQ_TYPE_EDGE_RISING) | 
|  | val |= 0x1; | 
|  | if (flow_type & IRQ_TYPE_EDGE_FALLING) | 
|  | val |= 0x2; | 
|  |  | 
|  | chip->irq_sense &= ~(3UL << (n * 2)); | 
|  | chip->irq_sense |= val << (n * 2); | 
|  | chip->irq_set_type_pending |= BIT(n); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id) | 
|  | { | 
|  | struct sx150x_chip *chip = (struct sx150x_chip *)dev_id; | 
|  | unsigned nhandled = 0; | 
|  | unsigned sub_irq; | 
|  | unsigned n; | 
|  | s32 err; | 
|  | u8 val; | 
|  | int i; | 
|  |  | 
|  | for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) { | 
|  | err = sx150x_i2c_read(chip->client, | 
|  | chip->dev_cfg->reg_irq_src - i, | 
|  | &val); | 
|  | if (err < 0) | 
|  | continue; | 
|  |  | 
|  | sx150x_i2c_write(chip->client, | 
|  | chip->dev_cfg->reg_irq_src - i, | 
|  | val); | 
|  | for (n = 0; n < 8; ++n) { | 
|  | if (val & (1 << n)) { | 
|  | sub_irq = chip->irq_base + (i * 8) + n; | 
|  | handle_nested_irq(sub_irq); | 
|  | ++nhandled; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); | 
|  | } | 
|  |  | 
|  | static void sx150x_irq_bus_lock(unsigned int irq) | 
|  | { | 
|  | struct irq_chip *ic = get_irq_chip(irq); | 
|  | struct sx150x_chip *chip; | 
|  |  | 
|  | chip = container_of(ic, struct sx150x_chip, irq_chip); | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | } | 
|  |  | 
|  | static void sx150x_irq_bus_sync_unlock(unsigned int irq) | 
|  | { | 
|  | struct irq_chip *ic = get_irq_chip(irq); | 
|  | struct sx150x_chip *chip; | 
|  | unsigned n; | 
|  |  | 
|  | chip = container_of(ic, struct sx150x_chip, irq_chip); | 
|  |  | 
|  | while (chip->irq_set_type_pending) { | 
|  | n = __ffs(chip->irq_set_type_pending); | 
|  | chip->irq_set_type_pending &= ~BIT(n); | 
|  | if (!(irq_to_desc(n + chip->irq_base)->status & IRQ_MASKED)) | 
|  | sx150x_write_cfg(chip, n, 2, | 
|  | chip->dev_cfg->reg_sense, | 
|  | chip->irq_sense >> (n * 2)); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&chip->lock); | 
|  | } | 
|  |  | 
|  | static void sx150x_init_chip(struct sx150x_chip *chip, | 
|  | struct i2c_client *client, | 
|  | kernel_ulong_t driver_data, | 
|  | struct sx150x_platform_data *pdata) | 
|  | { | 
|  | mutex_init(&chip->lock); | 
|  |  | 
|  | chip->client                     = client; | 
|  | chip->dev_cfg                    = &sx150x_devices[driver_data]; | 
|  | chip->gpio_chip.label            = client->name; | 
|  | chip->gpio_chip.direction_input  = sx150x_gpio_direction_input; | 
|  | chip->gpio_chip.direction_output = sx150x_gpio_direction_output; | 
|  | chip->gpio_chip.get              = sx150x_gpio_get; | 
|  | chip->gpio_chip.set              = sx150x_gpio_set; | 
|  | chip->gpio_chip.to_irq           = sx150x_gpio_to_irq; | 
|  | chip->gpio_chip.base             = pdata->gpio_base; | 
|  | chip->gpio_chip.can_sleep        = 1; | 
|  | chip->gpio_chip.ngpio            = chip->dev_cfg->ngpios; | 
|  | if (pdata->oscio_is_gpo) | 
|  | ++chip->gpio_chip.ngpio; | 
|  |  | 
|  | chip->irq_chip.name            = client->name; | 
|  | chip->irq_chip.mask            = sx150x_irq_mask; | 
|  | chip->irq_chip.unmask          = sx150x_irq_unmask; | 
|  | chip->irq_chip.set_type        = sx150x_irq_set_type; | 
|  | chip->irq_chip.bus_lock        = sx150x_irq_bus_lock; | 
|  | chip->irq_chip.bus_sync_unlock = sx150x_irq_bus_sync_unlock; | 
|  | chip->irq_summary              = -1; | 
|  | chip->irq_base                 = -1; | 
|  | chip->irq_sense                = 0; | 
|  | chip->irq_set_type_pending     = 0; | 
|  | } | 
|  |  | 
|  | static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg) | 
|  | { | 
|  | int err = 0; | 
|  | unsigned n; | 
|  |  | 
|  | for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n) | 
|  | err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8)); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sx150x_reset(struct sx150x_chip *chip) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = i2c_smbus_write_byte_data(chip->client, | 
|  | chip->dev_cfg->reg_reset, | 
|  | 0x12); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | err = i2c_smbus_write_byte_data(chip->client, | 
|  | chip->dev_cfg->reg_reset, | 
|  | 0x34); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sx150x_init_hw(struct sx150x_chip *chip, | 
|  | struct sx150x_platform_data *pdata) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | if (pdata->reset_during_probe) { | 
|  | err = sx150x_reset(chip); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | err = sx150x_i2c_write(chip->client, | 
|  | chip->dev_cfg->reg_misc, | 
|  | 0x01); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup, | 
|  | pdata->io_pullup_ena); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn, | 
|  | pdata->io_pulldn_ena); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | err = sx150x_init_io(chip, chip->dev_cfg->reg_drain, | 
|  | pdata->io_open_drain_ena); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | err = sx150x_init_io(chip, chip->dev_cfg->reg_polarity, | 
|  | pdata->io_polarity); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (pdata->oscio_is_gpo) | 
|  | sx150x_set_oscio(chip, 0); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int sx150x_install_irq_chip(struct sx150x_chip *chip, | 
|  | int irq_summary, | 
|  | int irq_base) | 
|  | { | 
|  | int err; | 
|  | unsigned n; | 
|  | unsigned irq; | 
|  |  | 
|  | chip->irq_summary = irq_summary; | 
|  | chip->irq_base    = irq_base; | 
|  |  | 
|  | for (n = 0; n < chip->dev_cfg->ngpios; ++n) { | 
|  | irq = irq_base + n; | 
|  | set_irq_chip_and_handler(irq, &chip->irq_chip, handle_edge_irq); | 
|  | set_irq_nested_thread(irq, 1); | 
|  | #ifdef CONFIG_ARM | 
|  | set_irq_flags(irq, IRQF_VALID); | 
|  | #else | 
|  | set_irq_noprobe(irq); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | err = request_threaded_irq(irq_summary, | 
|  | NULL, | 
|  | sx150x_irq_thread_fn, | 
|  | IRQF_SHARED | IRQF_TRIGGER_FALLING, | 
|  | chip->irq_chip.name, | 
|  | chip); | 
|  | if (err < 0) { | 
|  | chip->irq_summary = -1; | 
|  | chip->irq_base    = -1; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void sx150x_remove_irq_chip(struct sx150x_chip *chip) | 
|  | { | 
|  | unsigned n; | 
|  | unsigned irq; | 
|  |  | 
|  | free_irq(chip->irq_summary, chip); | 
|  |  | 
|  | for (n = 0; n < chip->dev_cfg->ngpios; ++n) { | 
|  | irq = chip->irq_base + n; | 
|  | set_irq_handler(irq, NULL); | 
|  | set_irq_chip(irq, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __devinit sx150x_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA | | 
|  | I2C_FUNC_SMBUS_WRITE_WORD_DATA; | 
|  | struct sx150x_platform_data *pdata; | 
|  | struct sx150x_chip *chip; | 
|  | int rc; | 
|  |  | 
|  | pdata = client->dev.platform_data; | 
|  | if (!pdata) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, i2c_funcs)) | 
|  | return -ENOSYS; | 
|  |  | 
|  | chip = kzalloc(sizeof(struct sx150x_chip), GFP_KERNEL); | 
|  | if (!chip) | 
|  | return -ENOMEM; | 
|  |  | 
|  | sx150x_init_chip(chip, client, id->driver_data, pdata); | 
|  | rc = sx150x_init_hw(chip, pdata); | 
|  | if (rc < 0) | 
|  | goto probe_fail_pre_gpiochip_add; | 
|  |  | 
|  | rc = gpiochip_add(&chip->gpio_chip); | 
|  | if (rc < 0) | 
|  | goto probe_fail_pre_gpiochip_add; | 
|  |  | 
|  | if (pdata->irq_summary >= 0) { | 
|  | rc = sx150x_install_irq_chip(chip, | 
|  | pdata->irq_summary, | 
|  | pdata->irq_base); | 
|  | if (rc < 0) | 
|  | goto probe_fail_post_gpiochip_add; | 
|  | } | 
|  |  | 
|  | i2c_set_clientdata(client, chip); | 
|  |  | 
|  | return 0; | 
|  | probe_fail_post_gpiochip_add: | 
|  | WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0); | 
|  | probe_fail_pre_gpiochip_add: | 
|  | kfree(chip); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int __devexit sx150x_remove(struct i2c_client *client) | 
|  | { | 
|  | struct sx150x_chip *chip; | 
|  | int rc; | 
|  |  | 
|  | chip = i2c_get_clientdata(client); | 
|  | rc = gpiochip_remove(&chip->gpio_chip); | 
|  | if (rc < 0) | 
|  | return rc; | 
|  |  | 
|  | if (chip->irq_summary >= 0) | 
|  | sx150x_remove_irq_chip(chip); | 
|  |  | 
|  | kfree(chip); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct i2c_driver sx150x_driver = { | 
|  | .driver = { | 
|  | .name = "sx150x", | 
|  | .owner = THIS_MODULE | 
|  | }, | 
|  | .probe    = sx150x_probe, | 
|  | .remove   = __devexit_p(sx150x_remove), | 
|  | .id_table = sx150x_id, | 
|  | }; | 
|  |  | 
|  | static int __init sx150x_init(void) | 
|  | { | 
|  | return i2c_add_driver(&sx150x_driver); | 
|  | } | 
|  | subsys_initcall(sx150x_init); | 
|  |  | 
|  | static void __exit sx150x_exit(void) | 
|  | { | 
|  | return i2c_del_driver(&sx150x_driver); | 
|  | } | 
|  | module_exit(sx150x_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>"); | 
|  | MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("i2c:sx150x"); |