| /******************************************************************************* |
| |
| Intel 10 Gigabit PCI Express Linux driver |
| Copyright(c) 1999 - 2011 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| Linux NICS <linux.nics@intel.com> |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| |
| #include "ixgbe.h" |
| #include "ixgbe_type.h" |
| #include "ixgbe_dcb.h" |
| #include "ixgbe_dcb_82598.h" |
| #include "ixgbe_dcb_82599.h" |
| |
| /** |
| * ixgbe_ieee_credits - This calculates the ieee traffic class |
| * credits from the configured bandwidth percentages. Credits |
| * are the smallest unit programable into the underlying |
| * hardware. The IEEE 802.1Qaz specification do not use bandwidth |
| * groups so this is much simplified from the CEE case. |
| */ |
| s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill, __u16 *max, int max_frame) |
| { |
| int min_percent = 100; |
| int min_credit, multiplier; |
| int i; |
| |
| min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) / |
| DCB_CREDIT_QUANTUM; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| if (bw[i] < min_percent && bw[i]) |
| min_percent = bw[i]; |
| } |
| |
| multiplier = (min_credit / min_percent) + 1; |
| |
| /* Find out the hw credits for each TC */ |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| int val = min(bw[i] * multiplier, MAX_CREDIT_REFILL); |
| |
| if (val < min_credit) |
| val = min_credit; |
| refill[i] = val; |
| |
| max[i] = (bw[i] * MAX_CREDIT)/100; |
| } |
| return 0; |
| } |
| |
| /** |
| * ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits |
| * @ixgbe_dcb_config: Struct containing DCB settings. |
| * @direction: Configuring either Tx or Rx. |
| * |
| * This function calculates the credits allocated to each traffic class. |
| * It should be called only after the rules are checked by |
| * ixgbe_dcb_check_config(). |
| */ |
| s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *hw, |
| struct ixgbe_dcb_config *dcb_config, |
| int max_frame, u8 direction) |
| { |
| struct tc_bw_alloc *p; |
| int min_credit; |
| int min_multiplier; |
| int min_percent = 100; |
| s32 ret_val = 0; |
| /* Initialization values default for Tx settings */ |
| u32 credit_refill = 0; |
| u32 credit_max = 0; |
| u16 link_percentage = 0; |
| u8 bw_percent = 0; |
| u8 i; |
| |
| if (dcb_config == NULL) { |
| ret_val = DCB_ERR_CONFIG; |
| goto out; |
| } |
| |
| min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) / |
| DCB_CREDIT_QUANTUM; |
| |
| /* Find smallest link percentage */ |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| p = &dcb_config->tc_config[i].path[direction]; |
| bw_percent = dcb_config->bw_percentage[direction][p->bwg_id]; |
| link_percentage = p->bwg_percent; |
| |
| link_percentage = (link_percentage * bw_percent) / 100; |
| |
| if (link_percentage && link_percentage < min_percent) |
| min_percent = link_percentage; |
| } |
| |
| /* |
| * The ratio between traffic classes will control the bandwidth |
| * percentages seen on the wire. To calculate this ratio we use |
| * a multiplier. It is required that the refill credits must be |
| * larger than the max frame size so here we find the smallest |
| * multiplier that will allow all bandwidth percentages to be |
| * greater than the max frame size. |
| */ |
| min_multiplier = (min_credit / min_percent) + 1; |
| |
| /* Find out the link percentage for each TC first */ |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| p = &dcb_config->tc_config[i].path[direction]; |
| bw_percent = dcb_config->bw_percentage[direction][p->bwg_id]; |
| |
| link_percentage = p->bwg_percent; |
| /* Must be careful of integer division for very small nums */ |
| link_percentage = (link_percentage * bw_percent) / 100; |
| if (p->bwg_percent > 0 && link_percentage == 0) |
| link_percentage = 1; |
| |
| /* Save link_percentage for reference */ |
| p->link_percent = (u8)link_percentage; |
| |
| /* Calculate credit refill ratio using multiplier */ |
| credit_refill = min(link_percentage * min_multiplier, |
| MAX_CREDIT_REFILL); |
| p->data_credits_refill = (u16)credit_refill; |
| |
| /* Calculate maximum credit for the TC */ |
| credit_max = (link_percentage * MAX_CREDIT) / 100; |
| |
| /* |
| * Adjustment based on rule checking, if the percentage |
| * of a TC is too small, the maximum credit may not be |
| * enough to send out a jumbo frame in data plane arbitration. |
| */ |
| if (credit_max && (credit_max < min_credit)) |
| credit_max = min_credit; |
| |
| if (direction == DCB_TX_CONFIG) { |
| /* |
| * Adjustment based on rule checking, if the |
| * percentage of a TC is too small, the maximum |
| * credit may not be enough to send out a TSO |
| * packet in descriptor plane arbitration. |
| */ |
| if ((hw->mac.type == ixgbe_mac_82598EB) && |
| credit_max && |
| (credit_max < MINIMUM_CREDIT_FOR_TSO)) |
| credit_max = MINIMUM_CREDIT_FOR_TSO; |
| |
| dcb_config->tc_config[i].desc_credits_max = |
| (u16)credit_max; |
| } |
| |
| p->data_credits_max = (u16)credit_max; |
| } |
| |
| out: |
| return ret_val; |
| } |
| |
| void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en) |
| { |
| int i; |
| |
| *pfc_en = 0; |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) |
| *pfc_en |= (cfg->tc_config[i].dcb_pfc & 0xF) << i; |
| } |
| |
| void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *cfg, int direction, |
| u16 *refill) |
| { |
| struct tc_bw_alloc *p; |
| int i; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| p = &cfg->tc_config[i].path[direction]; |
| refill[i] = p->data_credits_refill; |
| } |
| } |
| |
| void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *cfg, u16 *max) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) |
| max[i] = cfg->tc_config[i].desc_credits_max; |
| } |
| |
| void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *cfg, int direction, |
| u8 *bwgid) |
| { |
| struct tc_bw_alloc *p; |
| int i; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| p = &cfg->tc_config[i].path[direction]; |
| bwgid[i] = p->bwg_id; |
| } |
| } |
| |
| void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *cfg, int direction, |
| u8 *ptype) |
| { |
| struct tc_bw_alloc *p; |
| int i; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| p = &cfg->tc_config[i].path[direction]; |
| ptype[i] = p->prio_type; |
| } |
| } |
| |
| /** |
| * ixgbe_dcb_hw_config - Config and enable DCB |
| * @hw: pointer to hardware structure |
| * @dcb_config: pointer to ixgbe_dcb_config structure |
| * |
| * Configure dcb settings and enable dcb mode. |
| */ |
| s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw, |
| struct ixgbe_dcb_config *dcb_config) |
| { |
| s32 ret = 0; |
| u8 pfc_en; |
| u8 ptype[MAX_TRAFFIC_CLASS]; |
| u8 bwgid[MAX_TRAFFIC_CLASS]; |
| u16 refill[MAX_TRAFFIC_CLASS]; |
| u16 max[MAX_TRAFFIC_CLASS]; |
| |
| /* Unpack CEE standard containers */ |
| ixgbe_dcb_unpack_pfc(dcb_config, &pfc_en); |
| ixgbe_dcb_unpack_refill(dcb_config, DCB_TX_CONFIG, refill); |
| ixgbe_dcb_unpack_max(dcb_config, max); |
| ixgbe_dcb_unpack_bwgid(dcb_config, DCB_TX_CONFIG, bwgid); |
| ixgbe_dcb_unpack_prio(dcb_config, DCB_TX_CONFIG, ptype); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| ret = ixgbe_dcb_hw_config_82598(hw, dcb_config->rx_pba_cfg, |
| pfc_en, refill, max, bwgid, |
| ptype); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| ret = ixgbe_dcb_hw_config_82599(hw, dcb_config->rx_pba_cfg, |
| pfc_en, refill, max, bwgid, |
| ptype); |
| break; |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| /* Helper routines to abstract HW specifics from DCB netlink ops */ |
| s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en) |
| { |
| int ret = -EINVAL; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en); |
| break; |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw, |
| u16 *refill, u16 *max, u8 *bwg_id, u8 *tsa) |
| { |
| int i; |
| u8 prio_type[IEEE_8021QAZ_MAX_TCS]; |
| |
| /* Map TSA onto CEE prio type */ |
| for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { |
| switch (tsa[i]) { |
| case IEEE_8021QAZ_TSA_STRICT: |
| prio_type[i] = 2; |
| break; |
| case IEEE_8021QAZ_TSA_ETS: |
| prio_type[i] = 0; |
| break; |
| default: |
| /* Hardware only supports priority strict or |
| * ETS transmission selection algorithms if |
| * we receive some other value from dcbnl |
| * throw an error |
| */ |
| return -EINVAL; |
| } |
| } |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, |
| prio_type); |
| ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, |
| bwg_id, prio_type); |
| ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, |
| bwg_id, prio_type); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, |
| bwg_id, prio_type); |
| ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, |
| bwg_id, prio_type); |
| ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, |
| bwg_id, prio_type); |
| break; |
| default: |
| break; |
| } |
| return 0; |
| } |