|  | /* | 
|  | *  linux/arch/arm/common/amba.c | 
|  | * | 
|  | *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/amba/bus.h> | 
|  |  | 
|  | #include <asm/irq.h> | 
|  | #include <asm/sizes.h> | 
|  |  | 
|  | #define to_amba_driver(d)	container_of(d, struct amba_driver, drv) | 
|  |  | 
|  | static const struct amba_id * | 
|  | amba_lookup(const struct amba_id *table, struct amba_device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | while (table->mask) { | 
|  | ret = (dev->periphid & table->mask) == table->id; | 
|  | if (ret) | 
|  | break; | 
|  | table++; | 
|  | } | 
|  |  | 
|  | return ret ? table : NULL; | 
|  | } | 
|  |  | 
|  | static int amba_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | struct amba_driver *pcdrv = to_amba_driver(drv); | 
|  |  | 
|  | return amba_lookup(pcdrv->id_table, pcdev) != NULL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG | 
|  | static int amba_uevent(struct device *dev, struct kobj_uevent_env *env) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | int retval = 0; | 
|  |  | 
|  | retval = add_uevent_var(env, "AMBA_ID=%08x", pcdev->periphid); | 
|  | return retval; | 
|  | } | 
|  | #else | 
|  | #define amba_uevent NULL | 
|  | #endif | 
|  |  | 
|  | #define amba_attr_func(name,fmt,arg...)					\ | 
|  | static ssize_t name##_show(struct device *_dev,				\ | 
|  | struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | struct amba_device *dev = to_amba_device(_dev);			\ | 
|  | return sprintf(buf, fmt, arg);					\ | 
|  | } | 
|  |  | 
|  | #define amba_attr(name,fmt,arg...)	\ | 
|  | amba_attr_func(name,fmt,arg)		\ | 
|  | static DEVICE_ATTR(name, S_IRUGO, name##_show, NULL) | 
|  |  | 
|  | amba_attr_func(id, "%08x\n", dev->periphid); | 
|  | amba_attr(irq0, "%u\n", dev->irq[0]); | 
|  | amba_attr(irq1, "%u\n", dev->irq[1]); | 
|  | amba_attr_func(resource, "\t%016llx\t%016llx\t%016lx\n", | 
|  | (unsigned long long)dev->res.start, (unsigned long long)dev->res.end, | 
|  | dev->res.flags); | 
|  |  | 
|  | static struct device_attribute amba_dev_attrs[] = { | 
|  | __ATTR_RO(id), | 
|  | __ATTR_RO(resource), | 
|  | __ATTR_NULL, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  |  | 
|  | static int amba_legacy_suspend(struct device *dev, pm_message_t mesg) | 
|  | { | 
|  | struct amba_driver *adrv = to_amba_driver(dev->driver); | 
|  | struct amba_device *adev = to_amba_device(dev); | 
|  | int ret = 0; | 
|  |  | 
|  | if (dev->driver && adrv->suspend) | 
|  | ret = adrv->suspend(adev, mesg); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_legacy_resume(struct device *dev) | 
|  | { | 
|  | struct amba_driver *adrv = to_amba_driver(dev->driver); | 
|  | struct amba_device *adev = to_amba_device(dev); | 
|  | int ret = 0; | 
|  |  | 
|  | if (dev->driver && adrv->resume) | 
|  | ret = adrv->resume(adev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_prepare(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->prepare) | 
|  | ret = drv->pm->prepare(dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void amba_pm_complete(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  |  | 
|  | if (drv && drv->pm && drv->pm->complete) | 
|  | drv->pm->complete(dev); | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_PM_SLEEP */ | 
|  |  | 
|  | #define amba_pm_prepare		NULL | 
|  | #define amba_pm_complete		NULL | 
|  |  | 
|  | #endif /* !CONFIG_PM_SLEEP */ | 
|  |  | 
|  | #ifdef CONFIG_SUSPEND | 
|  |  | 
|  | static int amba_pm_suspend(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->suspend) | 
|  | ret = drv->pm->suspend(dev); | 
|  | } else { | 
|  | ret = amba_legacy_suspend(dev, PMSG_SUSPEND); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_suspend_noirq(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->suspend_noirq) | 
|  | ret = drv->pm->suspend_noirq(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_resume(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->resume) | 
|  | ret = drv->pm->resume(dev); | 
|  | } else { | 
|  | ret = amba_legacy_resume(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_resume_noirq(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->resume_noirq) | 
|  | ret = drv->pm->resume_noirq(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_SUSPEND */ | 
|  |  | 
|  | #define amba_pm_suspend		NULL | 
|  | #define amba_pm_resume		NULL | 
|  | #define amba_pm_suspend_noirq	NULL | 
|  | #define amba_pm_resume_noirq	NULL | 
|  |  | 
|  | #endif /* !CONFIG_SUSPEND */ | 
|  |  | 
|  | #ifdef CONFIG_HIBERNATE_CALLBACKS | 
|  |  | 
|  | static int amba_pm_freeze(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->freeze) | 
|  | ret = drv->pm->freeze(dev); | 
|  | } else { | 
|  | ret = amba_legacy_suspend(dev, PMSG_FREEZE); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_freeze_noirq(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->freeze_noirq) | 
|  | ret = drv->pm->freeze_noirq(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_thaw(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->thaw) | 
|  | ret = drv->pm->thaw(dev); | 
|  | } else { | 
|  | ret = amba_legacy_resume(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_thaw_noirq(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->thaw_noirq) | 
|  | ret = drv->pm->thaw_noirq(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_poweroff(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->poweroff) | 
|  | ret = drv->pm->poweroff(dev); | 
|  | } else { | 
|  | ret = amba_legacy_suspend(dev, PMSG_HIBERNATE); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_poweroff_noirq(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->poweroff_noirq) | 
|  | ret = drv->pm->poweroff_noirq(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_restore(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->restore) | 
|  | ret = drv->pm->restore(dev); | 
|  | } else { | 
|  | ret = amba_legacy_resume(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_restore_noirq(struct device *dev) | 
|  | { | 
|  | struct device_driver *drv = dev->driver; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!drv) | 
|  | return 0; | 
|  |  | 
|  | if (drv->pm) { | 
|  | if (drv->pm->restore_noirq) | 
|  | ret = drv->pm->restore_noirq(dev); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #else /* !CONFIG_HIBERNATE_CALLBACKS */ | 
|  |  | 
|  | #define amba_pm_freeze		NULL | 
|  | #define amba_pm_thaw		NULL | 
|  | #define amba_pm_poweroff		NULL | 
|  | #define amba_pm_restore		NULL | 
|  | #define amba_pm_freeze_noirq	NULL | 
|  | #define amba_pm_thaw_noirq		NULL | 
|  | #define amba_pm_poweroff_noirq	NULL | 
|  | #define amba_pm_restore_noirq	NULL | 
|  |  | 
|  | #endif /* !CONFIG_HIBERNATE_CALLBACKS */ | 
|  |  | 
|  | #ifdef CONFIG_PM_RUNTIME | 
|  | /* | 
|  | * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to | 
|  | * enable/disable the bus clock at runtime PM suspend/resume as this | 
|  | * does not result in loss of context.  However, disabling vcore power | 
|  | * would do, so we leave that to the driver. | 
|  | */ | 
|  | static int amba_pm_runtime_suspend(struct device *dev) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | int ret = pm_generic_runtime_suspend(dev); | 
|  |  | 
|  | if (ret == 0 && dev->driver) | 
|  | clk_disable(pcdev->pclk); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_pm_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | int ret; | 
|  |  | 
|  | if (dev->driver) { | 
|  | ret = clk_enable(pcdev->pclk); | 
|  | /* Failure is probably fatal to the system, but... */ | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return pm_generic_runtime_resume(dev); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | static const struct dev_pm_ops amba_pm = { | 
|  | .prepare	= amba_pm_prepare, | 
|  | .complete	= amba_pm_complete, | 
|  | .suspend	= amba_pm_suspend, | 
|  | .resume		= amba_pm_resume, | 
|  | .freeze		= amba_pm_freeze, | 
|  | .thaw		= amba_pm_thaw, | 
|  | .poweroff	= amba_pm_poweroff, | 
|  | .restore	= amba_pm_restore, | 
|  | .suspend_noirq	= amba_pm_suspend_noirq, | 
|  | .resume_noirq	= amba_pm_resume_noirq, | 
|  | .freeze_noirq	= amba_pm_freeze_noirq, | 
|  | .thaw_noirq	= amba_pm_thaw_noirq, | 
|  | .poweroff_noirq	= amba_pm_poweroff_noirq, | 
|  | .restore_noirq	= amba_pm_restore_noirq, | 
|  | SET_RUNTIME_PM_OPS( | 
|  | amba_pm_runtime_suspend, | 
|  | amba_pm_runtime_resume, | 
|  | pm_generic_runtime_idle | 
|  | ) | 
|  | }; | 
|  |  | 
|  | #define AMBA_PM (&amba_pm) | 
|  |  | 
|  | #else /* !CONFIG_PM */ | 
|  |  | 
|  | #define AMBA_PM	NULL | 
|  |  | 
|  | #endif /* !CONFIG_PM */ | 
|  |  | 
|  | /* | 
|  | * Primecells are part of the Advanced Microcontroller Bus Architecture, | 
|  | * so we call the bus "amba". | 
|  | */ | 
|  | struct bus_type amba_bustype = { | 
|  | .name		= "amba", | 
|  | .dev_attrs	= amba_dev_attrs, | 
|  | .match		= amba_match, | 
|  | .uevent		= amba_uevent, | 
|  | .pm		= AMBA_PM, | 
|  | }; | 
|  |  | 
|  | static int __init amba_init(void) | 
|  | { | 
|  | return bus_register(&amba_bustype); | 
|  | } | 
|  |  | 
|  | postcore_initcall(amba_init); | 
|  |  | 
|  | static int amba_get_enable_pclk(struct amba_device *pcdev) | 
|  | { | 
|  | struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk"); | 
|  | int ret; | 
|  |  | 
|  | pcdev->pclk = pclk; | 
|  |  | 
|  | if (IS_ERR(pclk)) | 
|  | return PTR_ERR(pclk); | 
|  |  | 
|  | ret = clk_prepare(pclk); | 
|  | if (ret) { | 
|  | clk_put(pclk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = clk_enable(pclk); | 
|  | if (ret) { | 
|  | clk_unprepare(pclk); | 
|  | clk_put(pclk); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void amba_put_disable_pclk(struct amba_device *pcdev) | 
|  | { | 
|  | struct clk *pclk = pcdev->pclk; | 
|  |  | 
|  | clk_disable(pclk); | 
|  | clk_unprepare(pclk); | 
|  | clk_put(pclk); | 
|  | } | 
|  |  | 
|  | static int amba_get_enable_vcore(struct amba_device *pcdev) | 
|  | { | 
|  | struct regulator *vcore = regulator_get(&pcdev->dev, "vcore"); | 
|  | int ret; | 
|  |  | 
|  | pcdev->vcore = vcore; | 
|  |  | 
|  | if (IS_ERR(vcore)) { | 
|  | /* It is OK not to supply a vcore regulator */ | 
|  | if (PTR_ERR(vcore) == -ENODEV) | 
|  | return 0; | 
|  | return PTR_ERR(vcore); | 
|  | } | 
|  |  | 
|  | ret = regulator_enable(vcore); | 
|  | if (ret) { | 
|  | regulator_put(vcore); | 
|  | pcdev->vcore = ERR_PTR(-ENODEV); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void amba_put_disable_vcore(struct amba_device *pcdev) | 
|  | { | 
|  | struct regulator *vcore = pcdev->vcore; | 
|  |  | 
|  | if (!IS_ERR(vcore)) { | 
|  | regulator_disable(vcore); | 
|  | regulator_put(vcore); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * These are the device model conversion veneers; they convert the | 
|  | * device model structures to our more specific structures. | 
|  | */ | 
|  | static int amba_probe(struct device *dev) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | struct amba_driver *pcdrv = to_amba_driver(dev->driver); | 
|  | const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); | 
|  | int ret; | 
|  |  | 
|  | do { | 
|  | ret = amba_get_enable_vcore(pcdev); | 
|  | if (ret) | 
|  | break; | 
|  |  | 
|  | ret = amba_get_enable_pclk(pcdev); | 
|  | if (ret) | 
|  | break; | 
|  |  | 
|  | pm_runtime_get_noresume(dev); | 
|  | pm_runtime_set_active(dev); | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | ret = pcdrv->probe(pcdev, id); | 
|  | if (ret == 0) | 
|  | break; | 
|  |  | 
|  | pm_runtime_disable(dev); | 
|  | pm_runtime_set_suspended(dev); | 
|  | pm_runtime_put_noidle(dev); | 
|  |  | 
|  | amba_put_disable_pclk(pcdev); | 
|  | amba_put_disable_vcore(pcdev); | 
|  | } while (0); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int amba_remove(struct device *dev) | 
|  | { | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | struct amba_driver *drv = to_amba_driver(dev->driver); | 
|  | int ret; | 
|  |  | 
|  | pm_runtime_get_sync(dev); | 
|  | ret = drv->remove(pcdev); | 
|  | pm_runtime_put_noidle(dev); | 
|  |  | 
|  | /* Undo the runtime PM settings in amba_probe() */ | 
|  | pm_runtime_disable(dev); | 
|  | pm_runtime_set_suspended(dev); | 
|  | pm_runtime_put_noidle(dev); | 
|  |  | 
|  | amba_put_disable_pclk(pcdev); | 
|  | amba_put_disable_vcore(pcdev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void amba_shutdown(struct device *dev) | 
|  | { | 
|  | struct amba_driver *drv = to_amba_driver(dev->driver); | 
|  | drv->shutdown(to_amba_device(dev)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_driver_register - register an AMBA device driver | 
|  | *	@drv: amba device driver structure | 
|  | * | 
|  | *	Register an AMBA device driver with the Linux device model | 
|  | *	core.  If devices pre-exist, the drivers probe function will | 
|  | *	be called. | 
|  | */ | 
|  | int amba_driver_register(struct amba_driver *drv) | 
|  | { | 
|  | drv->drv.bus = &amba_bustype; | 
|  |  | 
|  | #define SETFN(fn)	if (drv->fn) drv->drv.fn = amba_##fn | 
|  | SETFN(probe); | 
|  | SETFN(remove); | 
|  | SETFN(shutdown); | 
|  |  | 
|  | return driver_register(&drv->drv); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_driver_unregister - remove an AMBA device driver | 
|  | *	@drv: AMBA device driver structure to remove | 
|  | * | 
|  | *	Unregister an AMBA device driver from the Linux device | 
|  | *	model.  The device model will call the drivers remove function | 
|  | *	for each device the device driver is currently handling. | 
|  | */ | 
|  | void amba_driver_unregister(struct amba_driver *drv) | 
|  | { | 
|  | driver_unregister(&drv->drv); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void amba_device_release(struct device *dev) | 
|  | { | 
|  | struct amba_device *d = to_amba_device(dev); | 
|  |  | 
|  | if (d->res.parent) | 
|  | release_resource(&d->res); | 
|  | kfree(d); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_device_register - register an AMBA device | 
|  | *	@dev: AMBA device to register | 
|  | *	@parent: parent memory resource | 
|  | * | 
|  | *	Setup the AMBA device, reading the cell ID if present. | 
|  | *	Claim the resource, and register the AMBA device with | 
|  | *	the Linux device manager. | 
|  | */ | 
|  | int amba_device_register(struct amba_device *dev, struct resource *parent) | 
|  | { | 
|  | u32 size; | 
|  | void __iomem *tmp; | 
|  | int i, ret; | 
|  |  | 
|  | device_initialize(&dev->dev); | 
|  |  | 
|  | /* | 
|  | * Copy from device_add | 
|  | */ | 
|  | if (dev->dev.init_name) { | 
|  | dev_set_name(&dev->dev, "%s", dev->dev.init_name); | 
|  | dev->dev.init_name = NULL; | 
|  | } | 
|  |  | 
|  | dev->dev.release = amba_device_release; | 
|  | dev->dev.bus = &amba_bustype; | 
|  | dev->dev.dma_mask = &dev->dma_mask; | 
|  | dev->res.name = dev_name(&dev->dev); | 
|  |  | 
|  | if (!dev->dev.coherent_dma_mask && dev->dma_mask) | 
|  | dev_warn(&dev->dev, "coherent dma mask is unset\n"); | 
|  |  | 
|  | ret = request_resource(parent, &dev->res); | 
|  | if (ret) | 
|  | goto err_out; | 
|  |  | 
|  | /* Hard-coded primecell ID instead of plug-n-play */ | 
|  | if (dev->periphid != 0) | 
|  | goto skip_probe; | 
|  |  | 
|  | /* | 
|  | * Dynamically calculate the size of the resource | 
|  | * and use this for iomap | 
|  | */ | 
|  | size = resource_size(&dev->res); | 
|  | tmp = ioremap(dev->res.start, size); | 
|  | if (!tmp) { | 
|  | ret = -ENOMEM; | 
|  | goto err_release; | 
|  | } | 
|  |  | 
|  | ret = amba_get_enable_pclk(dev); | 
|  | if (ret == 0) { | 
|  | u32 pid, cid; | 
|  |  | 
|  | /* | 
|  | * Read pid and cid based on size of resource | 
|  | * they are located at end of region | 
|  | */ | 
|  | for (pid = 0, i = 0; i < 4; i++) | 
|  | pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << | 
|  | (i * 8); | 
|  | for (cid = 0, i = 0; i < 4; i++) | 
|  | cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << | 
|  | (i * 8); | 
|  |  | 
|  | amba_put_disable_pclk(dev); | 
|  |  | 
|  | if (cid == AMBA_CID) | 
|  | dev->periphid = pid; | 
|  |  | 
|  | if (!dev->periphid) | 
|  | ret = -ENODEV; | 
|  | } | 
|  |  | 
|  | iounmap(tmp); | 
|  |  | 
|  | if (ret) | 
|  | goto err_release; | 
|  |  | 
|  | skip_probe: | 
|  | ret = device_add(&dev->dev); | 
|  | if (ret) | 
|  | goto err_release; | 
|  |  | 
|  | if (dev->irq[0] != NO_IRQ) | 
|  | ret = device_create_file(&dev->dev, &dev_attr_irq0); | 
|  | if (ret == 0 && dev->irq[1] != NO_IRQ) | 
|  | ret = device_create_file(&dev->dev, &dev_attr_irq1); | 
|  | if (ret == 0) | 
|  | return ret; | 
|  |  | 
|  | device_unregister(&dev->dev); | 
|  |  | 
|  | err_release: | 
|  | release_resource(&dev->res); | 
|  | err_out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_device_unregister - unregister an AMBA device | 
|  | *	@dev: AMBA device to remove | 
|  | * | 
|  | *	Remove the specified AMBA device from the Linux device | 
|  | *	manager.  All files associated with this object will be | 
|  | *	destroyed, and device drivers notified that the device has | 
|  | *	been removed.  The AMBA device's resources including | 
|  | *	the amba_device structure will be freed once all | 
|  | *	references to it have been dropped. | 
|  | */ | 
|  | void amba_device_unregister(struct amba_device *dev) | 
|  | { | 
|  | device_unregister(&dev->dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | struct find_data { | 
|  | struct amba_device *dev; | 
|  | struct device *parent; | 
|  | const char *busid; | 
|  | unsigned int id; | 
|  | unsigned int mask; | 
|  | }; | 
|  |  | 
|  | static int amba_find_match(struct device *dev, void *data) | 
|  | { | 
|  | struct find_data *d = data; | 
|  | struct amba_device *pcdev = to_amba_device(dev); | 
|  | int r; | 
|  |  | 
|  | r = (pcdev->periphid & d->mask) == d->id; | 
|  | if (d->parent) | 
|  | r &= d->parent == dev->parent; | 
|  | if (d->busid) | 
|  | r &= strcmp(dev_name(dev), d->busid) == 0; | 
|  |  | 
|  | if (r) { | 
|  | get_device(dev); | 
|  | d->dev = pcdev; | 
|  | } | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_find_device - locate an AMBA device given a bus id | 
|  | *	@busid: bus id for device (or NULL) | 
|  | *	@parent: parent device (or NULL) | 
|  | *	@id: peripheral ID (or 0) | 
|  | *	@mask: peripheral ID mask (or 0) | 
|  | * | 
|  | *	Return the AMBA device corresponding to the supplied parameters. | 
|  | *	If no device matches, returns NULL. | 
|  | * | 
|  | *	NOTE: When a valid device is found, its refcount is | 
|  | *	incremented, and must be decremented before the returned | 
|  | *	reference. | 
|  | */ | 
|  | struct amba_device * | 
|  | amba_find_device(const char *busid, struct device *parent, unsigned int id, | 
|  | unsigned int mask) | 
|  | { | 
|  | struct find_data data; | 
|  |  | 
|  | data.dev = NULL; | 
|  | data.parent = parent; | 
|  | data.busid = busid; | 
|  | data.id = id; | 
|  | data.mask = mask; | 
|  |  | 
|  | bus_for_each_dev(&amba_bustype, NULL, &data, amba_find_match); | 
|  |  | 
|  | return data.dev; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_request_regions - request all mem regions associated with device | 
|  | *	@dev: amba_device structure for device | 
|  | *	@name: name, or NULL to use driver name | 
|  | */ | 
|  | int amba_request_regions(struct amba_device *dev, const char *name) | 
|  | { | 
|  | int ret = 0; | 
|  | u32 size; | 
|  |  | 
|  | if (!name) | 
|  | name = dev->dev.driver->name; | 
|  |  | 
|  | size = resource_size(&dev->res); | 
|  |  | 
|  | if (!request_mem_region(dev->res.start, size, name)) | 
|  | ret = -EBUSY; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	amba_release_regions - release mem regions associated with device | 
|  | *	@dev: amba_device structure for device | 
|  | * | 
|  | *	Release regions claimed by a successful call to amba_request_regions. | 
|  | */ | 
|  | void amba_release_regions(struct amba_device *dev) | 
|  | { | 
|  | u32 size; | 
|  |  | 
|  | size = resource_size(&dev->res); | 
|  | release_mem_region(dev->res.start, size); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(amba_driver_register); | 
|  | EXPORT_SYMBOL(amba_driver_unregister); | 
|  | EXPORT_SYMBOL(amba_device_register); | 
|  | EXPORT_SYMBOL(amba_device_unregister); | 
|  | EXPORT_SYMBOL(amba_find_device); | 
|  | EXPORT_SYMBOL(amba_request_regions); | 
|  | EXPORT_SYMBOL(amba_release_regions); |