| /* linux/include/asm/hardware/s3c2410/regs-gpioj.h |
| * |
| * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> |
| * http://www.simtec.co.uk/products/SWLINUX/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * S3C2440 GPIO J register definitions |
| */ |
| |
| |
| #ifndef __ASM_ARCH_REGS_GPIOJ_H |
| #define __ASM_ARCH_REGS_GPIOJ_H "gpioj" |
| |
| /* Port J consists of 13 GPIO/Camera pins |
| * |
| * GPJCON has 2 bits for each of the input pins on port F |
| * 00 = 0 input, 1 output, 2 Camera |
| * |
| * pull up works like all other ports. |
| */ |
| |
| #define S3C2440_GPIO_BANKJ (416) |
| |
| #define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) |
| #define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) |
| #define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) |
| |
| #define S3C2413_GPJCON S3C2410_GPIOREG(0x80) |
| #define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) |
| #define S3C2413_GPJUP S3C2410_GPIOREG(0x88) |
| #define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) |
| |
| #define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) |
| #define S3C2440_GPJ0_INP (0x00 << 0) |
| #define S3C2440_GPJ0_OUTP (0x01 << 0) |
| #define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) |
| |
| #define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) |
| #define S3C2440_GPJ1_INP (0x00 << 2) |
| #define S3C2440_GPJ1_OUTP (0x01 << 2) |
| #define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) |
| |
| #define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) |
| #define S3C2440_GPJ2_INP (0x00 << 4) |
| #define S3C2440_GPJ2_OUTP (0x01 << 4) |
| #define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) |
| |
| #define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) |
| #define S3C2440_GPJ3_INP (0x00 << 6) |
| #define S3C2440_GPJ3_OUTP (0x01 << 6) |
| #define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) |
| |
| #define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) |
| #define S3C2440_GPJ4_INP (0x00 << 8) |
| #define S3C2440_GPJ4_OUTP (0x01 << 8) |
| #define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) |
| |
| #define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) |
| #define S3C2440_GPJ5_INP (0x00 << 10) |
| #define S3C2440_GPJ5_OUTP (0x01 << 10) |
| #define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) |
| |
| #define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) |
| #define S3C2440_GPJ6_INP (0x00 << 12) |
| #define S3C2440_GPJ6_OUTP (0x01 << 12) |
| #define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) |
| |
| #define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) |
| #define S3C2440_GPJ7_INP (0x00 << 14) |
| #define S3C2440_GPJ7_OUTP (0x01 << 14) |
| #define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) |
| |
| #define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) |
| #define S3C2440_GPJ8_INP (0x00 << 16) |
| #define S3C2440_GPJ8_OUTP (0x01 << 16) |
| #define S3C2440_GPJ8_CAMPCLK (0x02 << 16) |
| |
| #define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) |
| #define S3C2440_GPJ9_INP (0x00 << 18) |
| #define S3C2440_GPJ9_OUTP (0x01 << 18) |
| #define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) |
| |
| #define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) |
| #define S3C2440_GPJ10_INP (0x00 << 20) |
| #define S3C2440_GPJ10_OUTP (0x01 << 20) |
| #define S3C2440_GPJ10_CAMHREF (0x02 << 20) |
| |
| #define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) |
| #define S3C2440_GPJ11_INP (0x00 << 22) |
| #define S3C2440_GPJ11_OUTP (0x01 << 22) |
| #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) |
| |
| #define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) |
| #define S3C2440_GPJ12_INP (0x00 << 24) |
| #define S3C2440_GPJ12_OUTP (0x01 << 24) |
| #define S3C2440_GPJ12_CAMRESET (0x02 << 24) |
| |
| #endif /* __ASM_ARCH_REGS_GPIOJ_H */ |
| |
