blob: 9b099468a5dbb496d0892f8c465131522aae7d9a [file] [log] [blame]
/*
* Copyright © 2006-2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
#include <drm/drmP.h>
#include <asm/intel-mid.h>
#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>
/* The max/min PWM frequency in BPCR[31:17] - */
/* The smallest number is 1 (not 0) that can fit in the
* 15-bit field of the and then*/
/* shifts to the left by one bit to get the actual 16-bit
* value that the 15-bits correspond to.*/
#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
#define BRIGHTNESS_MAX_LEVEL 100
/**
* Sets the power state for the panel.
*/
static void oaktrail_lvds_set_power(struct drm_device *dev,
struct gma_encoder *gma_encoder,
bool on)
{
u32 pp_status;
struct drm_psb_private *dev_priv = dev->dev_private;
if (!gma_power_begin(dev, true))
return;
if (on) {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
dev_priv->is_lvds_on = true;
if (dev_priv->ops->lvds_bl_power)
dev_priv->ops->lvds_bl_power(dev, true);
} else {
if (dev_priv->ops->lvds_bl_power)
dev_priv->ops->lvds_bl_power(dev, false);
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while (pp_status & PP_ON);
dev_priv->is_lvds_on = false;
pm_request_idle(&dev->pdev->dev);
}
gma_power_end(dev);
}
static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
if (mode == DRM_MODE_DPMS_ON)
oaktrail_lvds_set_power(dev, gma_encoder, true);
else
oaktrail_lvds_set_power(dev, gma_encoder, false);
/* XXX: We never power down the LVDS pairs. */
}
static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector = NULL;
struct drm_crtc *crtc = encoder->crtc;
u32 lvds_port;
uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
if (!gma_power_begin(dev, true))
return;
/*
* The LVDS pin pair will already have been turned on in the
* psb_intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
lvds_port = (REG_READ(LVDS) &
(~LVDS_PIPEB_SELECT)) |
LVDS_PORT_EN |
LVDS_BORDER_EN;
/* If the firmware says dither on Moorestown, or the BIOS does
on Oaktrail then enable dithering */
if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
REG_WRITE(LVDS, lvds_port);
/* Find the connector we're trying to set up */
list_for_each_entry(connector, &mode_config->connector_list, head) {
if (!connector->encoder || connector->encoder->crtc != crtc)
continue;
}
if (!connector) {
DRM_ERROR("Couldn't find connector when setting mode");
return;
}
drm_object_property_get_value(
&connector->base,
dev->mode_config.scaling_mode_property,
&v);
if (v == DRM_MODE_SCALE_NO_SCALE)
REG_WRITE(PFIT_CONTROL, 0);
else if (v == DRM_MODE_SCALE_ASPECT) {
if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
(mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
(mode->hdisplay * adjusted_mode->crtc_vdisplay))
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
else if ((adjusted_mode->crtc_hdisplay *
mode->vdisplay) > (mode->hdisplay *
adjusted_mode->crtc_vdisplay))
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
PFIT_SCALING_MODE_PILLARBOX);
else
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
PFIT_SCALING_MODE_LETTERBOX);
} else
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
} else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
gma_power_end(dev);
}
static void oaktrail_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
if (!gma_power_begin(dev, true))
return;
mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
oaktrail_lvds_set_power(dev, gma_encoder, false);
gma_power_end(dev);
}
static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 ret;
if (gma_power_begin(dev, false)) {
ret = ((REG_READ(BLC_PWM_CTL) &
BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
gma_power_end(dev);
} else
ret = ((dev_priv->regs.saveBLC_PWM_CTL &
BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
return ret;
}
static void oaktrail_lvds_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
if (mode_dev->backlight_duty_cycle == 0)
mode_dev->backlight_duty_cycle =
oaktrail_lvds_get_max_backlight(dev);
oaktrail_lvds_set_power(dev, gma_encoder, true);
}
static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = {
.dpms = oaktrail_lvds_dpms,
.mode_fixup = psb_intel_lvds_mode_fixup,
.prepare = oaktrail_lvds_prepare,
.mode_set = oaktrail_lvds_mode_set,
.commit = oaktrail_lvds_commit,
};
/* Returns the panel fixed mode from configuration. */
static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct drm_display_mode *mode = NULL;
struct drm_psb_private *dev_priv = dev->dev_private;
struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
mode_dev->panel_fixed_mode = NULL;
/* Use the firmware provided data on Moorestown */
if (dev_priv->has_gct) {
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
if (!mode)
return;
mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
mode->hsync_start = mode->hdisplay + \
((ti->hsync_offset_hi << 8) | \
ti->hsync_offset_lo);
mode->hsync_end = mode->hsync_start + \
((ti->hsync_pulse_width_hi << 8) | \
ti->hsync_pulse_width_lo);
mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
ti->hblank_lo);
mode->vsync_start = \
mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
ti->vsync_offset_lo);
mode->vsync_end = \
mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
ti->vsync_pulse_width_lo);
mode->vtotal = mode->vdisplay + \
((ti->vblank_hi << 8) | ti->vblank_lo);
mode->clock = ti->pixel_clock * 10;
#if 0
printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay);
printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay);
printk(KERN_INFO "HSS is %d\n", mode->hsync_start);
printk(KERN_INFO "HSE is %d\n", mode->hsync_end);
printk(KERN_INFO "htotal is %d\n", mode->htotal);
printk(KERN_INFO "VSS is %d\n", mode->vsync_start);
printk(KERN_INFO "VSE is %d\n", mode->vsync_end);
printk(KERN_INFO "vtotal is %d\n", mode->vtotal);
printk(KERN_INFO "clock is %d\n", mode->clock);
#endif
mode_dev->panel_fixed_mode = mode;
}
/* Use the BIOS VBT mode if available */
if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode)
mode_dev->panel_fixed_mode = drm_mode_duplicate(dev,
mode_dev->vbt_mode);
/* Then try the LVDS VBT mode */
if (mode_dev->panel_fixed_mode == NULL)
if (dev_priv->lfp_lvds_vbt_mode)
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev,
dev_priv->lfp_lvds_vbt_mode);
/* If we still got no mode then bail */
if (mode_dev->panel_fixed_mode == NULL)
return;
drm_mode_set_name(mode_dev->panel_fixed_mode);
drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0);
}
/**
* oaktrail_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
void oaktrail_lvds_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct gma_encoder *gma_encoder;
struct gma_connector *gma_connector;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_psb_private *dev_priv = dev->dev_private;
struct edid *edid;
struct i2c_adapter *i2c_adap;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
if (!gma_encoder)
return;
gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
if (!gma_connector)
goto failed_connector;
connector = &gma_connector->base;
encoder = &gma_encoder->base;
dev_priv->is_lvds_on = true;
drm_connector_init(dev, connector,
&psb_intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_encoder_init(dev, encoder, &psb_intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS);
gma_connector_attach_encoder(gma_connector, gma_encoder);
gma_encoder->type = INTEL_OUTPUT_LVDS;
drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs);
drm_connector_helper_add(connector,
&psb_intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
drm_object_attach_property(&connector->base,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
drm_object_attach_property(&connector->base,
dev_priv->backlight_property,
BRIGHTNESS_MAX_LEVEL);
mode_dev->panel_wants_dither = false;
if (dev_priv->has_gct)
mode_dev->panel_wants_dither = (dev_priv->gct_data.
Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
if (dev_priv->lvds_dither)
mode_dev->panel_wants_dither = 1;
/*
* LVDS discovery:
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
* 4) make sure lid is open
* if closed, act like it's not there for now
*/
mutex_lock(&dev->mode_config.mutex);
i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
if (i2c_adap == NULL)
dev_err(dev->dev, "No ddc adapter available!\n");
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
if (i2c_adap) {
edid = drm_get_edid(connector, i2c_adap);
if (edid) {
drm_mode_connector_update_edid_property(connector,
edid);
drm_add_edid_modes(connector, edid);
kfree(edid);
}
list_for_each_entry(scan, &connector->probed_modes, head) {
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
goto out; /* FIXME: check for quirks */
}
}
}
/*
* If we didn't get EDID, try geting panel timing
* from configuration data
*/
oaktrail_lvds_get_configuration_mode(dev, mode_dev);
if (mode_dev->panel_fixed_mode) {
mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
goto out; /* FIXME: check for quirks */
}
/* If we still don't have a mode after all that, give up. */
if (!mode_dev->panel_fixed_mode) {
dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
goto failed_find;
}
out:
mutex_unlock(&dev->mode_config.mutex);
drm_sysfs_connector_add(connector);
return;
failed_find:
mutex_unlock(&dev->mode_config.mutex);
dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
if (gma_encoder->ddc_bus)
psb_intel_i2c_destroy(gma_encoder->ddc_bus);
/* failed_ddc: */
drm_encoder_cleanup(encoder);
drm_connector_cleanup(connector);
kfree(gma_connector);
failed_connector:
kfree(gma_encoder);
}