|  | /* | 
|  | Copyright (C) 2004 - 2009 rt2x00 SourceForge Project | 
|  | <http://rt2x00.serialmonkey.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the | 
|  | Free Software Foundation, Inc., | 
|  | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | Module: rt2x00usb | 
|  | Abstract: rt2x00 generic usb device routines. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/bug.h> | 
|  |  | 
|  | #include "rt2x00.h" | 
|  | #include "rt2x00usb.h" | 
|  |  | 
|  | /* | 
|  | * Interfacing with the HW. | 
|  | */ | 
|  | int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, | 
|  | const u8 request, const u8 requesttype, | 
|  | const u16 offset, const u16 value, | 
|  | void *buffer, const u16 buffer_length, | 
|  | const int timeout) | 
|  | { | 
|  | struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); | 
|  | int status; | 
|  | unsigned int i; | 
|  | unsigned int pipe = | 
|  | (requesttype == USB_VENDOR_REQUEST_IN) ? | 
|  | usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); | 
|  |  | 
|  |  | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | status = usb_control_msg(usb_dev, pipe, request, requesttype, | 
|  | value, offset, buffer, buffer_length, | 
|  | timeout); | 
|  | if (status >= 0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Check for errors | 
|  | * -ENODEV: Device has disappeared, no point continuing. | 
|  | * All other errors: Try again. | 
|  | */ | 
|  | else if (status == -ENODEV) | 
|  | break; | 
|  | } | 
|  |  | 
|  | ERROR(rt2x00dev, | 
|  | "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n", | 
|  | request, offset, status); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); | 
|  |  | 
|  | int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, | 
|  | const u8 request, const u8 requesttype, | 
|  | const u16 offset, void *buffer, | 
|  | const u16 buffer_length, const int timeout) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | BUG_ON(!mutex_is_locked(&rt2x00dev->csr_mutex)); | 
|  |  | 
|  | /* | 
|  | * Check for Cache availability. | 
|  | */ | 
|  | if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) { | 
|  | ERROR(rt2x00dev, "CSR cache not available.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (requesttype == USB_VENDOR_REQUEST_OUT) | 
|  | memcpy(rt2x00dev->csr.cache, buffer, buffer_length); | 
|  |  | 
|  | status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, | 
|  | offset, 0, rt2x00dev->csr.cache, | 
|  | buffer_length, timeout); | 
|  |  | 
|  | if (!status && requesttype == USB_VENDOR_REQUEST_IN) | 
|  | memcpy(buffer, rt2x00dev->csr.cache, buffer_length); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_vendor_req_buff_lock); | 
|  |  | 
|  | int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, | 
|  | const u8 request, const u8 requesttype, | 
|  | const u16 offset, void *buffer, | 
|  | const u16 buffer_length, const int timeout) | 
|  | { | 
|  | int status; | 
|  |  | 
|  | mutex_lock(&rt2x00dev->csr_mutex); | 
|  |  | 
|  | status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, | 
|  | requesttype, offset, buffer, | 
|  | buffer_length, timeout); | 
|  |  | 
|  | mutex_unlock(&rt2x00dev->csr_mutex); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); | 
|  |  | 
|  | int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, | 
|  | const u8 request, const u8 requesttype, | 
|  | const u16 offset, const void *buffer, | 
|  | const u16 buffer_length, | 
|  | const int timeout) | 
|  | { | 
|  | int status = 0; | 
|  | unsigned char *tb; | 
|  | u16 off, len, bsize; | 
|  |  | 
|  | mutex_lock(&rt2x00dev->csr_mutex); | 
|  |  | 
|  | tb  = (char *)buffer; | 
|  | off = offset; | 
|  | len = buffer_length; | 
|  | while (len && !status) { | 
|  | bsize = min_t(u16, CSR_CACHE_SIZE, len); | 
|  | status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, | 
|  | requesttype, off, tb, | 
|  | bsize, timeout); | 
|  |  | 
|  | tb  += bsize; | 
|  | len -= bsize; | 
|  | off += bsize; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&rt2x00dev->csr_mutex); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); | 
|  |  | 
|  | int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, | 
|  | const unsigned int offset, | 
|  | struct rt2x00_field32 field, | 
|  | u32 *reg) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = 0; i < REGISTER_BUSY_COUNT; i++) { | 
|  | rt2x00usb_register_read_lock(rt2x00dev, offset, reg); | 
|  | if (!rt2x00_get_field32(*reg, field)) | 
|  | return 1; | 
|  | udelay(REGISTER_BUSY_DELAY); | 
|  | } | 
|  |  | 
|  | ERROR(rt2x00dev, "Indirect register access failed: " | 
|  | "offset=0x%.08x, value=0x%.08x\n", offset, *reg); | 
|  | *reg = ~0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read); | 
|  |  | 
|  | /* | 
|  | * TX data handlers. | 
|  | */ | 
|  | static void rt2x00usb_interrupt_txdone(struct urb *urb) | 
|  | { | 
|  | struct queue_entry *entry = (struct queue_entry *)urb->context; | 
|  | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | 
|  | struct txdone_entry_desc txdesc; | 
|  |  | 
|  | if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || | 
|  | !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Obtain the status about this packet. | 
|  | * Note that when the status is 0 it does not mean the | 
|  | * frame was send out correctly. It only means the frame | 
|  | * was succesfully pushed to the hardware, we have no | 
|  | * way to determine the transmission status right now. | 
|  | * (Only indirectly by looking at the failed TX counters | 
|  | * in the register). | 
|  | */ | 
|  | txdesc.flags = 0; | 
|  | if (!urb->status) | 
|  | __set_bit(TXDONE_UNKNOWN, &txdesc.flags); | 
|  | else | 
|  | __set_bit(TXDONE_FAILURE, &txdesc.flags); | 
|  | txdesc.retry = 0; | 
|  |  | 
|  | rt2x00lib_txdone(entry, &txdesc); | 
|  | } | 
|  |  | 
|  | int rt2x00usb_write_tx_data(struct queue_entry *entry) | 
|  | { | 
|  | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | 
|  | struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); | 
|  | struct queue_entry_priv_usb *entry_priv = entry->priv_data; | 
|  | struct skb_frame_desc *skbdesc; | 
|  | u32 length; | 
|  |  | 
|  | /* | 
|  | * Add the descriptor in front of the skb. | 
|  | */ | 
|  | skb_push(entry->skb, entry->queue->desc_size); | 
|  | memset(entry->skb->data, 0, entry->queue->desc_size); | 
|  |  | 
|  | /* | 
|  | * Fill in skb descriptor | 
|  | */ | 
|  | skbdesc = get_skb_frame_desc(entry->skb); | 
|  | skbdesc->desc = entry->skb->data; | 
|  | skbdesc->desc_len = entry->queue->desc_size; | 
|  |  | 
|  | /* | 
|  | * USB devices cannot blindly pass the skb->len as the | 
|  | * length of the data to usb_fill_bulk_urb. Pass the skb | 
|  | * to the driver to determine what the length should be. | 
|  | */ | 
|  | length = rt2x00dev->ops->lib->get_tx_data_len(entry); | 
|  |  | 
|  | usb_fill_bulk_urb(entry_priv->urb, usb_dev, | 
|  | usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint), | 
|  | entry->skb->data, length, | 
|  | rt2x00usb_interrupt_txdone, entry); | 
|  |  | 
|  | /* | 
|  | * Make sure the skb->data pointer points to the frame, not the | 
|  | * descriptor. | 
|  | */ | 
|  | skb_pull(entry->skb, entry->queue->desc_size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); | 
|  |  | 
|  | static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry) | 
|  | { | 
|  | struct queue_entry_priv_usb *entry_priv = entry->priv_data; | 
|  |  | 
|  | if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) | 
|  | usb_submit_urb(entry_priv->urb, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, | 
|  | const enum data_queue_qid qid) | 
|  | { | 
|  | struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); | 
|  | unsigned long irqflags; | 
|  | unsigned int index; | 
|  | unsigned int index_done; | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * Only protect the range we are going to loop over, | 
|  | * if during our loop a extra entry is set to pending | 
|  | * it should not be kicked during this run, since it | 
|  | * is part of another TX operation. | 
|  | */ | 
|  | spin_lock_irqsave(&queue->lock, irqflags); | 
|  | index = queue->index[Q_INDEX]; | 
|  | index_done = queue->index[Q_INDEX_DONE]; | 
|  | spin_unlock_irqrestore(&queue->lock, irqflags); | 
|  |  | 
|  | /* | 
|  | * Start from the TX done pointer, this guarentees that we will | 
|  | * send out all frames in the correct order. | 
|  | */ | 
|  | if (index_done < index) { | 
|  | for (i = index_done; i < index; i++) | 
|  | rt2x00usb_kick_tx_entry(&queue->entries[i]); | 
|  | } else { | 
|  | for (i = index_done; i < queue->limit; i++) | 
|  | rt2x00usb_kick_tx_entry(&queue->entries[i]); | 
|  |  | 
|  | for (i = 0; i < index; i++) | 
|  | rt2x00usb_kick_tx_entry(&queue->entries[i]); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue); | 
|  |  | 
|  | void rt2x00usb_kill_tx_queue(struct rt2x00_dev *rt2x00dev, | 
|  | const enum data_queue_qid qid) | 
|  | { | 
|  | struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); | 
|  | struct queue_entry_priv_usb *entry_priv; | 
|  | struct queue_entry_priv_usb_bcn *bcn_priv; | 
|  | unsigned int i; | 
|  | bool kill_guard; | 
|  |  | 
|  | /* | 
|  | * When killing the beacon queue, we must also kill | 
|  | * the beacon guard byte. | 
|  | */ | 
|  | kill_guard = | 
|  | (qid == QID_BEACON) && | 
|  | (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)); | 
|  |  | 
|  | /* | 
|  | * Cancel all entries. | 
|  | */ | 
|  | for (i = 0; i < queue->limit; i++) { | 
|  | entry_priv = queue->entries[i].priv_data; | 
|  | usb_kill_urb(entry_priv->urb); | 
|  |  | 
|  | /* | 
|  | * Kill guardian urb (if required by driver). | 
|  | */ | 
|  | if (kill_guard) { | 
|  | bcn_priv = queue->entries[i].priv_data; | 
|  | usb_kill_urb(bcn_priv->guardian_urb); | 
|  | } | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue); | 
|  |  | 
|  | /* | 
|  | * RX data handlers. | 
|  | */ | 
|  | static void rt2x00usb_interrupt_rxdone(struct urb *urb) | 
|  | { | 
|  | struct queue_entry *entry = (struct queue_entry *)urb->context; | 
|  | struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; | 
|  | struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); | 
|  | u8 rxd[32]; | 
|  |  | 
|  | if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || | 
|  | !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Check if the received data is simply too small | 
|  | * to be actually valid, or if the urb is signaling | 
|  | * a problem. | 
|  | */ | 
|  | if (urb->actual_length < entry->queue->desc_size || urb->status) { | 
|  | set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); | 
|  | usb_submit_urb(urb, GFP_ATOMIC); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fill in desc fields of the skb descriptor | 
|  | */ | 
|  | skbdesc->desc = rxd; | 
|  | skbdesc->desc_len = entry->queue->desc_size; | 
|  |  | 
|  | /* | 
|  | * Send the frame to rt2x00lib for further processing. | 
|  | */ | 
|  | rt2x00lib_rxdone(rt2x00dev, entry); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Radio handlers | 
|  | */ | 
|  | void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, | 
|  | REGISTER_TIMEOUT); | 
|  |  | 
|  | /* | 
|  | * The USB version of kill_tx_queue also works | 
|  | * on the RX queue. | 
|  | */ | 
|  | rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev, QID_RX); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); | 
|  |  | 
|  | /* | 
|  | * Device initialization handlers. | 
|  | */ | 
|  | void rt2x00usb_clear_entry(struct queue_entry *entry) | 
|  | { | 
|  | struct usb_device *usb_dev = | 
|  | to_usb_device_intf(entry->queue->rt2x00dev->dev); | 
|  | struct queue_entry_priv_usb *entry_priv = entry->priv_data; | 
|  | int pipe; | 
|  |  | 
|  | if (entry->queue->qid == QID_RX) { | 
|  | pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint); | 
|  | usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe, | 
|  | entry->skb->data, entry->skb->len, | 
|  | rt2x00usb_interrupt_rxdone, entry); | 
|  |  | 
|  | set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); | 
|  | usb_submit_urb(entry_priv->urb, GFP_ATOMIC); | 
|  | } else { | 
|  | entry->flags = 0; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry); | 
|  |  | 
|  | static void rt2x00usb_assign_endpoint(struct data_queue *queue, | 
|  | struct usb_endpoint_descriptor *ep_desc) | 
|  | { | 
|  | struct usb_device *usb_dev = to_usb_device_intf(queue->rt2x00dev->dev); | 
|  | int pipe; | 
|  |  | 
|  | queue->usb_endpoint = usb_endpoint_num(ep_desc); | 
|  |  | 
|  | if (queue->qid == QID_RX) { | 
|  | pipe = usb_rcvbulkpipe(usb_dev, queue->usb_endpoint); | 
|  | queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 0); | 
|  | } else { | 
|  | pipe = usb_sndbulkpipe(usb_dev, queue->usb_endpoint); | 
|  | queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 1); | 
|  | } | 
|  |  | 
|  | if (!queue->usb_maxpacket) | 
|  | queue->usb_maxpacket = 1; | 
|  | } | 
|  |  | 
|  | static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(rt2x00dev->dev); | 
|  | struct usb_host_interface *intf_desc = intf->cur_altsetting; | 
|  | struct usb_endpoint_descriptor *ep_desc; | 
|  | struct data_queue *queue = rt2x00dev->tx; | 
|  | struct usb_endpoint_descriptor *tx_ep_desc = NULL; | 
|  | unsigned int i; | 
|  |  | 
|  | /* | 
|  | * Walk through all available endpoints to search for "bulk in" | 
|  | * and "bulk out" endpoints. When we find such endpoints collect | 
|  | * the information we need from the descriptor and assign it | 
|  | * to the queue. | 
|  | */ | 
|  | for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) { | 
|  | ep_desc = &intf_desc->endpoint[i].desc; | 
|  |  | 
|  | if (usb_endpoint_is_bulk_in(ep_desc)) { | 
|  | rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc); | 
|  | } else if (usb_endpoint_is_bulk_out(ep_desc) && | 
|  | (queue != queue_end(rt2x00dev))) { | 
|  | rt2x00usb_assign_endpoint(queue, ep_desc); | 
|  | queue = queue_next(queue); | 
|  |  | 
|  | tx_ep_desc = ep_desc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * At least 1 endpoint for RX and 1 endpoint for TX must be available. | 
|  | */ | 
|  | if (!rt2x00dev->rx->usb_endpoint || !rt2x00dev->tx->usb_endpoint) { | 
|  | ERROR(rt2x00dev, "Bulk-in/Bulk-out endpoints not found\n"); | 
|  | return -EPIPE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * It might be possible not all queues have a dedicated endpoint. | 
|  | * Loop through all TX queues and copy the endpoint information | 
|  | * which we have gathered from already assigned endpoints. | 
|  | */ | 
|  | txall_queue_for_each(rt2x00dev, queue) { | 
|  | if (!queue->usb_endpoint) | 
|  | rt2x00usb_assign_endpoint(queue, tx_ep_desc); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_queue *queue) | 
|  | { | 
|  | struct queue_entry_priv_usb *entry_priv; | 
|  | struct queue_entry_priv_usb_bcn *bcn_priv; | 
|  | unsigned int i; | 
|  |  | 
|  | for (i = 0; i < queue->limit; i++) { | 
|  | entry_priv = queue->entries[i].priv_data; | 
|  | entry_priv->urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!entry_priv->urb) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If this is not the beacon queue or | 
|  | * no guardian byte was required for the beacon, | 
|  | * then we are done. | 
|  | */ | 
|  | if (rt2x00dev->bcn != queue || | 
|  | !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) | 
|  | return 0; | 
|  |  | 
|  | for (i = 0; i < queue->limit; i++) { | 
|  | bcn_priv = queue->entries[i].priv_data; | 
|  | bcn_priv->guardian_urb = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!bcn_priv->guardian_urb) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, | 
|  | struct data_queue *queue) | 
|  | { | 
|  | struct queue_entry_priv_usb *entry_priv; | 
|  | struct queue_entry_priv_usb_bcn *bcn_priv; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!queue->entries) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < queue->limit; i++) { | 
|  | entry_priv = queue->entries[i].priv_data; | 
|  | usb_kill_urb(entry_priv->urb); | 
|  | usb_free_urb(entry_priv->urb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If this is not the beacon queue or | 
|  | * no guardian byte was required for the beacon, | 
|  | * then we are done. | 
|  | */ | 
|  | if (rt2x00dev->bcn != queue || | 
|  | !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < queue->limit; i++) { | 
|  | bcn_priv = queue->entries[i].priv_data; | 
|  | usb_kill_urb(bcn_priv->guardian_urb); | 
|  | usb_free_urb(bcn_priv->guardian_urb); | 
|  | } | 
|  | } | 
|  |  | 
|  | int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct data_queue *queue; | 
|  | int status; | 
|  |  | 
|  | /* | 
|  | * Find endpoints for each queue | 
|  | */ | 
|  | status = rt2x00usb_find_endpoints(rt2x00dev); | 
|  | if (status) | 
|  | goto exit; | 
|  |  | 
|  | /* | 
|  | * Allocate DMA | 
|  | */ | 
|  | queue_for_each(rt2x00dev, queue) { | 
|  | status = rt2x00usb_alloc_urb(rt2x00dev, queue); | 
|  | if (status) | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | rt2x00usb_uninitialize(rt2x00dev); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_initialize); | 
|  |  | 
|  | void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | struct data_queue *queue; | 
|  |  | 
|  | queue_for_each(rt2x00dev, queue) | 
|  | rt2x00usb_free_urb(rt2x00dev, queue); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); | 
|  |  | 
|  | /* | 
|  | * USB driver handlers. | 
|  | */ | 
|  | static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | kfree(rt2x00dev->rf); | 
|  | rt2x00dev->rf = NULL; | 
|  |  | 
|  | kfree(rt2x00dev->eeprom); | 
|  | rt2x00dev->eeprom = NULL; | 
|  |  | 
|  | kfree(rt2x00dev->csr.cache); | 
|  | rt2x00dev->csr.cache = NULL; | 
|  | } | 
|  |  | 
|  | static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) | 
|  | { | 
|  | rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); | 
|  | if (!rt2x00dev->csr.cache) | 
|  | goto exit; | 
|  |  | 
|  | rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); | 
|  | if (!rt2x00dev->eeprom) | 
|  | goto exit; | 
|  |  | 
|  | rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); | 
|  | if (!rt2x00dev->rf) | 
|  | goto exit; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit: | 
|  | ERROR_PROBE("Failed to allocate registers.\n"); | 
|  |  | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | int rt2x00usb_probe(struct usb_interface *usb_intf, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_device *usb_dev = interface_to_usbdev(usb_intf); | 
|  | struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info; | 
|  | struct ieee80211_hw *hw; | 
|  | struct rt2x00_dev *rt2x00dev; | 
|  | int retval; | 
|  |  | 
|  | usb_dev = usb_get_dev(usb_dev); | 
|  |  | 
|  | hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); | 
|  | if (!hw) { | 
|  | ERROR_PROBE("Failed to allocate hardware.\n"); | 
|  | retval = -ENOMEM; | 
|  | goto exit_put_device; | 
|  | } | 
|  |  | 
|  | usb_set_intfdata(usb_intf, hw); | 
|  |  | 
|  | rt2x00dev = hw->priv; | 
|  | rt2x00dev->dev = &usb_intf->dev; | 
|  | rt2x00dev->ops = ops; | 
|  | rt2x00dev->hw = hw; | 
|  |  | 
|  | retval = rt2x00usb_alloc_reg(rt2x00dev); | 
|  | if (retval) | 
|  | goto exit_free_device; | 
|  |  | 
|  | retval = rt2x00lib_probe_dev(rt2x00dev); | 
|  | if (retval) | 
|  | goto exit_free_reg; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_free_reg: | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  |  | 
|  | exit_free_device: | 
|  | ieee80211_free_hw(hw); | 
|  |  | 
|  | exit_put_device: | 
|  | usb_put_dev(usb_dev); | 
|  |  | 
|  | usb_set_intfdata(usb_intf, NULL); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_probe); | 
|  |  | 
|  | void rt2x00usb_disconnect(struct usb_interface *usb_intf) | 
|  | { | 
|  | struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  |  | 
|  | /* | 
|  | * Free all allocated data. | 
|  | */ | 
|  | rt2x00lib_remove_dev(rt2x00dev); | 
|  | rt2x00usb_free_reg(rt2x00dev); | 
|  | ieee80211_free_hw(hw); | 
|  |  | 
|  | /* | 
|  | * Free the USB device data. | 
|  | */ | 
|  | usb_set_intfdata(usb_intf, NULL); | 
|  | usb_put_dev(interface_to_usbdev(usb_intf)); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) | 
|  | { | 
|  | struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  | int retval; | 
|  |  | 
|  | retval = rt2x00lib_suspend(rt2x00dev, state); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | /* | 
|  | * Decrease usbdev refcount. | 
|  | */ | 
|  | usb_put_dev(interface_to_usbdev(usb_intf)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_suspend); | 
|  |  | 
|  | int rt2x00usb_resume(struct usb_interface *usb_intf) | 
|  | { | 
|  | struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); | 
|  | struct rt2x00_dev *rt2x00dev = hw->priv; | 
|  |  | 
|  | usb_get_dev(interface_to_usbdev(usb_intf)); | 
|  |  | 
|  | return rt2x00lib_resume(rt2x00dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(rt2x00usb_resume); | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | /* | 
|  | * rt2x00usb module information. | 
|  | */ | 
|  | MODULE_AUTHOR(DRV_PROJECT); | 
|  | MODULE_VERSION(DRV_VERSION); | 
|  | MODULE_DESCRIPTION("rt2x00 usb library"); | 
|  | MODULE_LICENSE("GPL"); |