| Freescale i.MX audio complex with S/PDIF transceiver |
| |
| Required properties: |
| |
| - compatible : "fsl,imx-audio-spdif" |
| |
| - model : The user-visible name of this sound complex |
| |
| - spdif-controller : The phandle of the i.MX S/PDIF controller |
| |
| |
| Optional properties: |
| |
| - spdif-out : This is a boolean property. If present, the transmitting |
| function of S/PDIF will be enabled, indicating there's a physical |
| S/PDIF out connector/jack on the board or it's connecting to some |
| other IP block, such as an HDMI encoder/display-controller. |
| |
| - spdif-in : This is a boolean property. If present, the receiving |
| function of S/PDIF will be enabled, indicating there's a physical |
| S/PDIF in connector/jack on the board. |
| |
| * Note: At least one of these two properties should be set in the DT binding. |
| |
| |
| Example: |
| |
| sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-out; |
| spdif-in; |
| }; |
