| # |
| # ARM CPU Frequency scaling drivers |
| # |
| |
| # big LITTLE core layer and glue drivers |
| config ARM_BIG_LITTLE_CPUFREQ |
| tristate "Generic ARM big LITTLE CPUfreq driver" |
| depends on ARM && BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK |
| select PM_OPP |
| help |
| This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. |
| |
| config ARM_DT_BL_CPUFREQ |
| tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver" |
| depends on ARM_BIG_LITTLE_CPUFREQ && OF |
| help |
| This enables probing via DT for Generic CPUfreq driver for ARM |
| big.LITTLE platform. This gets frequency tables from DT. |
| |
| config ARM_VEXPRESS_SPC_CPUFREQ |
| tristate "Versatile Express SPC based CPUfreq driver" |
| depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC |
| help |
| This add the CPUfreq driver support for Versatile Express |
| big.LITTLE platforms using SPC for power management. |
| |
| |
| config ARM_EXYNOS_CPUFREQ |
| bool |
| |
| config ARM_EXYNOS4210_CPUFREQ |
| bool "SAMSUNG EXYNOS4210" |
| depends on CPU_EXYNOS4210 |
| default y |
| select ARM_EXYNOS_CPUFREQ |
| help |
| This adds the CPUFreq driver for Samsung EXYNOS4210 |
| SoC (S5PV310 or S5PC210). |
| |
| If in doubt, say N. |
| |
| config ARM_EXYNOS4X12_CPUFREQ |
| bool "SAMSUNG EXYNOS4x12" |
| depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 |
| default y |
| select ARM_EXYNOS_CPUFREQ |
| help |
| This adds the CPUFreq driver for Samsung EXYNOS4X12 |
| SoC (EXYNOS4212 or EXYNOS4412). |
| |
| If in doubt, say N. |
| |
| config ARM_EXYNOS5250_CPUFREQ |
| bool "SAMSUNG EXYNOS5250" |
| depends on SOC_EXYNOS5250 |
| default y |
| select ARM_EXYNOS_CPUFREQ |
| help |
| This adds the CPUFreq driver for Samsung EXYNOS5250 |
| SoC. |
| |
| If in doubt, say N. |
| |
| config ARM_EXYNOS5440_CPUFREQ |
| bool "SAMSUNG EXYNOS5440" |
| depends on SOC_EXYNOS5440 |
| depends on HAVE_CLK && OF |
| select PM_OPP |
| default y |
| help |
| This adds the CPUFreq driver for Samsung EXYNOS5440 |
| SoC. The nature of exynos5440 clock controller is |
| different than previous exynos controllers so not using |
| the common exynos framework. |
| |
| If in doubt, say N. |
| |
| config ARM_EXYNOS_CPU_FREQ_BOOST_SW |
| bool "EXYNOS Frequency Overclocking - Software" |
| depends on ARM_EXYNOS_CPUFREQ |
| select CPU_FREQ_BOOST_SW |
| select EXYNOS_THERMAL |
| help |
| This driver supports software managed overclocking (BOOST). |
| It allows usage of special frequencies for Samsung Exynos |
| processors if thermal conditions are appropriate. |
| |
| It requires, for safe operation, thermal framework with properly |
| defined trip points. |
| |
| If in doubt, say N. |
| |
| config ARM_HIGHBANK_CPUFREQ |
| tristate "Calxeda Highbank-based" |
| depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR |
| default m |
| help |
| This adds the CPUFreq driver for Calxeda Highbank SoC |
| based boards. |
| |
| If in doubt, say N. |
| |
| config ARM_IMX6Q_CPUFREQ |
| tristate "Freescale i.MX6 cpufreq support" |
| depends on ARCH_MXC |
| depends on REGULATOR_ANATOP |
| help |
| This adds cpufreq driver support for Freescale i.MX6 series SoCs. |
| |
| If in doubt, say N. |
| |
| config ARM_INTEGRATOR |
| tristate "CPUfreq driver for ARM Integrator CPUs" |
| depends on ARCH_INTEGRATOR |
| default y |
| help |
| This enables the CPUfreq driver for ARM Integrator CPUs. |
| If in doubt, say Y. |
| |
| config ARM_KIRKWOOD_CPUFREQ |
| def_bool MACH_KIRKWOOD |
| help |
| This adds the CPUFreq driver for Marvell Kirkwood |
| SoCs. |
| |
| config ARM_OMAP2PLUS_CPUFREQ |
| bool "TI OMAP2+" |
| depends on ARCH_OMAP2PLUS |
| default ARCH_OMAP2PLUS |
| |
| config ARM_S3C_CPUFREQ |
| bool |
| help |
| Internal configuration node for common cpufreq on Samsung SoC |
| |
| config ARM_S3C24XX_CPUFREQ |
| bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" |
| depends on ARCH_S3C24XX |
| select ARM_S3C_CPUFREQ |
| help |
| This enables the CPUfreq driver for the Samsung S3C24XX family |
| of CPUs. |
| |
| For details, take a look at <file:Documentation/cpu-freq>. |
| |
| If in doubt, say N. |
| |
| config ARM_S3C24XX_CPUFREQ_DEBUG |
| bool "Debug CPUfreq Samsung driver core" |
| depends on ARM_S3C24XX_CPUFREQ |
| help |
| Enable s3c_freq_dbg for the Samsung S3C CPUfreq core |
| |
| config ARM_S3C24XX_CPUFREQ_IODEBUG |
| bool "Debug CPUfreq Samsung driver IO timing" |
| depends on ARM_S3C24XX_CPUFREQ |
| help |
| Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core |
| |
| config ARM_S3C24XX_CPUFREQ_DEBUGFS |
| bool "Export debugfs for CPUFreq" |
| depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS |
| help |
| Export status information via debugfs. |
| |
| config ARM_S3C2410_CPUFREQ |
| bool |
| depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 |
| select S3C2410_CPUFREQ_UTILS |
| help |
| CPU Frequency scaling support for S3C2410 |
| |
| config ARM_S3C2412_CPUFREQ |
| bool |
| depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 |
| default y |
| select S3C2412_IOTIMING |
| help |
| CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. |
| |
| config ARM_S3C2416_CPUFREQ |
| bool "S3C2416 CPU Frequency scaling support" |
| depends on CPU_S3C2416 |
| help |
| This adds the CPUFreq driver for the Samsung S3C2416 and |
| S3C2450 SoC. The S3C2416 supports changing the rate of the |
| armdiv clock source and also entering a so called dynamic |
| voltage scaling mode in which it is possible to reduce the |
| core voltage of the CPU. |
| |
| If in doubt, say N. |
| |
| config ARM_S3C2416_CPUFREQ_VCORESCALE |
| bool "Allow voltage scaling for S3C2416 arm core" |
| depends on ARM_S3C2416_CPUFREQ && REGULATOR |
| help |
| Enable CPU voltage scaling when entering the dvs mode. |
| It uses information gathered through existing hardware and |
| tests but not documented in any datasheet. |
| |
| If in doubt, say N. |
| |
| config ARM_S3C2440_CPUFREQ |
| bool "S3C2440/S3C2442 CPU Frequency scaling support" |
| depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) |
| select S3C2410_CPUFREQ_UTILS |
| default y |
| help |
| CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. |
| |
| config ARM_S3C64XX_CPUFREQ |
| bool "Samsung S3C64XX" |
| depends on CPU_S3C6410 |
| default y |
| help |
| This adds the CPUFreq driver for Samsung S3C6410 SoC. |
| |
| If in doubt, say N. |
| |
| config ARM_S5PV210_CPUFREQ |
| bool "Samsung S5PV210 and S5PC110" |
| depends on CPU_S5PV210 |
| default y |
| help |
| This adds the CPUFreq driver for Samsung S5PV210 and |
| S5PC110 SoCs. |
| |
| If in doubt, say N. |
| |
| config ARM_SA1100_CPUFREQ |
| bool |
| |
| config ARM_SA1110_CPUFREQ |
| bool |
| |
| config ARM_SPEAR_CPUFREQ |
| bool "SPEAr CPUFreq support" |
| depends on PLAT_SPEAR |
| default y |
| help |
| This adds the CPUFreq driver support for SPEAr SOCs. |
| |
| config ARM_TEGRA_CPUFREQ |
| bool "TEGRA CPUFreq support" |
| depends on ARCH_TEGRA |
| default y |
| help |
| This adds the CPUFreq driver support for TEGRA SOCs. |
