drivers/char/ds1620.c - arm/linux-arm64-legacy - Git at Google

 /*
  * linux/drivers/char/ds1620.c: Dallas Semiconductors DS1620
  *   thermometer driver (as used in the Rebel.com NetWinder)
  */
 #include <linux/module.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/capability.h>
 #include <linux/init.h>
 #include <linux/mutex.h>

 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/uaccess.h>
 #include <asm/therm.h>

 #ifdef CONFIG_PROC_FS
 /* define for /proc interface */
 #define THERM_USE_PROC
 #endif

 /* Definitions for DS1620 chip */
 #define THERM_START_CONVERT	0xee
 #define THERM_RESET		0xaf
 #define THERM_READ_CONFIG	0xac
 #define THERM_READ_TEMP		0xaa
 #define THERM_READ_TL		0xa2
 #define THERM_READ_TH		0xa1
 #define THERM_WRITE_CONFIG	0x0c
 #define THERM_WRITE_TL		0x02
 #define THERM_WRITE_TH		0x01

 #define CFG_CPU			2
 #define CFG_1SHOT		1

 static DEFINE_MUTEX(ds1620_mutex);
 static const char *fan_state[] = { "off", "on", "on (hardwired)" };

 /*
  * Start of NetWinder specifics
  *  Note!  We have to hold the gpio lock with IRQs disabled over the
  *  whole of our transaction to the Dallas chip, since there is a
  *  chance that the WaveArtist driver could touch these bits to
  *  enable or disable the speaker.
  */
 extern unsigned int system_rev;

 static inline void netwinder_ds1620_set_clk(int clk)
 {
 	nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
 }

 static inline void netwinder_ds1620_set_data(int dat)
 {
 	nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
 }

 static inline int netwinder_ds1620_get_data(void)
 {
 	return nw_gpio_read() & GPIO_DATA;
 }

 static inline void netwinder_ds1620_set_data_dir(int dir)
 {
 	nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
 }

 static inline void netwinder_ds1620_reset(void)
 {
 	nw_cpld_modify(CPLD_DS_ENABLE, 0);
 	nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
 }

 static inline void netwinder_lock(unsigned long *flags)
 {
 	raw_spin_lock_irqsave(&nw_gpio_lock, *flags);
 }

 static inline void netwinder_unlock(unsigned long *flags)
 {
 	raw_spin_unlock_irqrestore(&nw_gpio_lock, *flags);
 }

 static inline void netwinder_set_fan(int i)
 {
 	unsigned long flags;

 	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 	nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
 	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }

 static inline int netwinder_get_fan(void)
 {
 	if ((system_rev & 0xf000) == 0x4000)
 		return FAN_ALWAYS_ON;

 	return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
 }

 /*
  * End of NetWinder specifics
  */

 static void ds1620_send_bits(int nr, int value)
 {
 	int i;

 	for (i = 0; i < nr; i++) {
 		netwinder_ds1620_set_data(value & 1);
 		netwinder_ds1620_set_clk(0);
 		udelay(1);
 		netwinder_ds1620_set_clk(1);
 		udelay(1);

 		value >>= 1;
 	}
 }

 static unsigned int ds1620_recv_bits(int nr)
 {
 	unsigned int value = 0, mask = 1;
 	int i;

 	netwinder_ds1620_set_data(0);

 	for (i = 0; i < nr; i++) {
 		netwinder_ds1620_set_clk(0);
 		udelay(1);

 		if (netwinder_ds1620_get_data())
 			value |= mask;

 		mask <<= 1;

 		netwinder_ds1620_set_clk(1);
 		udelay(1);
 	}

 	return value;
 }

 static void ds1620_out(int cmd, int bits, int value)
 {
 	unsigned long flags;

 	netwinder_lock(&flags);
 	netwinder_ds1620_set_clk(1);
 	netwinder_ds1620_set_data_dir(0);
 	netwinder_ds1620_reset();

 	udelay(1);

 	ds1620_send_bits(8, cmd);
 	if (bits)
 		ds1620_send_bits(bits, value);

 	udelay(1);

 	netwinder_ds1620_reset();
 	netwinder_unlock(&flags);

 	msleep(20);
 }

 static unsigned int ds1620_in(int cmd, int bits)
 {
 	unsigned long flags;
 	unsigned int value;

 	netwinder_lock(&flags);
 	netwinder_ds1620_set_clk(1);
 	netwinder_ds1620_set_data_dir(0);
 	netwinder_ds1620_reset();

 	udelay(1);

 	ds1620_send_bits(8, cmd);

 	netwinder_ds1620_set_data_dir(1);
 	value = ds1620_recv_bits(bits);

 	netwinder_ds1620_reset();
 	netwinder_unlock(&flags);

 	return value;
 }

 static int cvt_9_to_int(unsigned int val)
 {
 	if (val & 0x100)
 		val |= 0xfffffe00;

 	return val;
 }

 static void ds1620_write_state(struct therm *therm)
 {
 	ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
 	ds1620_out(THERM_WRITE_TL, 9, therm->lo);
 	ds1620_out(THERM_WRITE_TH, 9, therm->hi);
 	ds1620_out(THERM_START_CONVERT, 0, 0);
 }

 static void ds1620_read_state(struct therm *therm)
 {
 	therm->lo = cvt_9_to_int(ds1620_in(THERM_READ_TL, 9));
 	therm->hi = cvt_9_to_int(ds1620_in(THERM_READ_TH, 9));
 }

 static int ds1620_open(struct inode *inode, struct file *file)
 {
 	return nonseekable_open(inode, file);
 }

 static ssize_t
 ds1620_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
 {
 	signed int cur_temp;
 	signed char cur_temp_degF;

 	cur_temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9)) >> 1;

 	/* convert to Fahrenheit, as per wdt.c */
 	cur_temp_degF = (cur_temp * 9) / 5 + 32;

 	if (copy_to_user(buf, &cur_temp_degF, 1))
 		return -EFAULT;

 	return 1;
 }

 static int
 ds1620_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct therm therm;
 	union {
 		struct therm __user *therm;
 		int __user *i;
 	} uarg;
 	int i;

 	uarg.i = (int __user *)arg;

 	switch(cmd) {
 	case CMD_SET_THERMOSTATE:
 	case CMD_SET_THERMOSTATE2:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;

 		if (cmd == CMD_SET_THERMOSTATE) {
 			if (get_user(therm.hi, uarg.i))
 				return -EFAULT;
 			therm.lo = therm.hi - 3;
 		} else {
 			if (copy_from_user(&therm, uarg.therm, sizeof(therm)))
 				return -EFAULT;
 		}

 		therm.lo <<= 1;
 		therm.hi <<= 1;

 		ds1620_write_state(&therm);
 		break;

 	case CMD_GET_THERMOSTATE:
 	case CMD_GET_THERMOSTATE2:
 		ds1620_read_state(&therm);

 		therm.lo >>= 1;
 		therm.hi >>= 1;

 		if (cmd == CMD_GET_THERMOSTATE) {
 			if (put_user(therm.hi, uarg.i))
 				return -EFAULT;
 		} else {
 			if (copy_to_user(uarg.therm, &therm, sizeof(therm)))
 				return -EFAULT;
 		}
 		break;

 	case CMD_GET_TEMPERATURE:
 	case CMD_GET_TEMPERATURE2:
 		i = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));

 		if (cmd == CMD_GET_TEMPERATURE)
 			i >>= 1;

 		return put_user(i, uarg.i) ? -EFAULT : 0;

 	case CMD_GET_STATUS:
 		i = ds1620_in(THERM_READ_CONFIG, 8) & 0xe3;

 		return put_user(i, uarg.i) ? -EFAULT : 0;

 	case CMD_GET_FAN:
 		i = netwinder_get_fan();

 		return put_user(i, uarg.i) ? -EFAULT : 0;

 	case CMD_SET_FAN:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;

 		if (get_user(i, uarg.i))
 			return -EFAULT;

 		netwinder_set_fan(i);
 		break;

 	default:
 		return -ENOIOCTLCMD;
 	}

 	return 0;
 }

 static long
 ds1620_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int ret;

 	mutex_lock(&ds1620_mutex);
 	ret = ds1620_ioctl(file, cmd, arg);
 	mutex_unlock(&ds1620_mutex);

 	return ret;
 }

 #ifdef THERM_USE_PROC
 static int ds1620_proc_therm_show(struct seq_file *m, void *v)
 {
 	struct therm th;
 	int temp;

 	ds1620_read_state(&th);
 	temp =  cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));

 	seq_printf(m, "Thermostat: HI %i.%i, LOW %i.%i; temperature: %i.%i C, fan %s\n",
 		   th.hi >> 1, th.hi & 1 ? 5 : 0,
 		   th.lo >> 1, th.lo & 1 ? 5 : 0,
 		   temp  >> 1, temp  & 1 ? 5 : 0,
 		   fan_state[netwinder_get_fan()]);
 	return 0;
 }

 static int ds1620_proc_therm_open(struct inode *inode, struct file *file)
 {
 	return single_open(file, ds1620_proc_therm_show, NULL);
 }

 static const struct file_operations ds1620_proc_therm_fops = {
 	.open		= ds1620_proc_therm_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
 	.release	= single_release,
 };
 #endif

 static const struct file_operations ds1620_fops = {
 	.owner		= THIS_MODULE,
 	.open		= ds1620_open,
 	.read		= ds1620_read,
 	.unlocked_ioctl	= ds1620_unlocked_ioctl,
 	.llseek		= no_llseek,
 };

 static struct miscdevice ds1620_miscdev = {
 	TEMP_MINOR,
 	"temp",
 	&ds1620_fops
 };

 static int __init ds1620_init(void)
 {
 	int ret;
 	struct therm th, th_start;

 	if (!machine_is_netwinder())
 		return -ENODEV;

 	ds1620_out(THERM_RESET, 0, 0);
 	ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
 	ds1620_out(THERM_START_CONVERT, 0, 0);

 	/*
 	 * Trigger the fan to start by setting
 	 * temperature high point low.  This kicks
 	 * the fan into action.
 	 */
 	ds1620_read_state(&th);
 	th_start.lo = 0;
 	th_start.hi = 1;
 	ds1620_write_state(&th_start);

 	msleep(2000);

 	ds1620_write_state(&th);

 	ret = misc_register(&ds1620_miscdev);
 	if (ret < 0)
 		return ret;

 #ifdef THERM_USE_PROC
 	if (!proc_create("therm", 0, NULL, &ds1620_proc_therm_fops))
 		printk(KERN_ERR "therm: unable to register /proc/therm\n");
 #endif

 	ds1620_read_state(&th);
 	ret = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));

 	printk(KERN_INFO "Thermostat: high %i.%i, low %i.%i, "
 	       "current %i.%i C, fan %s.\n",
 	       th.hi >> 1, th.hi & 1 ? 5 : 0,
 	       th.lo >> 1, th.lo & 1 ? 5 : 0,
 	       ret   >> 1, ret   & 1 ? 5 : 0,
 	       fan_state[netwinder_get_fan()]);

 	return 0;
 }

 static void __exit ds1620_exit(void)
 {
 #ifdef THERM_USE_PROC
 	remove_proc_entry("therm", NULL);
 #endif
 	misc_deregister(&ds1620_miscdev);
 }

 module_init(ds1620_init);
 module_exit(ds1620_exit);

 MODULE_LICENSE("GPL");
	/*
	* linux/drivers/char/ds1620.c: Dallas Semiconductors DS1620
	* thermometer driver (as used in the Rebel.com NetWinder)
	*/
	#include <linux/module.h>
	#include <linux/miscdevice.h>
	#include <linux/delay.h>
	#include <linux/proc_fs.h>
	#include <linux/seq_file.h>
	#include <linux/capability.h>
	#include <linux/init.h>
	#include <linux/mutex.h>

	#include <mach/hardware.h>
	#include <asm/mach-types.h>
	#include <asm/uaccess.h>
	#include <asm/therm.h>

	#ifdef CONFIG_PROC_FS
	/* define for /proc interface */
	#define THERM_USE_PROC
	#endif

	/* Definitions for DS1620 chip */
	#define THERM_START_CONVERT 0xee
	#define THERM_RESET 0xaf
	#define THERM_READ_CONFIG 0xac
	#define THERM_READ_TEMP 0xaa
	#define THERM_READ_TL 0xa2
	#define THERM_READ_TH 0xa1
	#define THERM_WRITE_CONFIG 0x0c
	#define THERM_WRITE_TL 0x02
	#define THERM_WRITE_TH 0x01

	#define CFG_CPU 2
	#define CFG_1SHOT 1

	static DEFINE_MUTEX(ds1620_mutex);
	static const char *fan_state[] = { "off", "on", "on (hardwired)" };

	/*
	* Start of NetWinder specifics
	* Note! We have to hold the gpio lock with IRQs disabled over the
	* whole of our transaction to the Dallas chip, since there is a
	* chance that the WaveArtist driver could touch these bits to
	* enable or disable the speaker.
	*/
	extern unsigned int system_rev;

	static inline void netwinder_ds1620_set_clk(int clk)
	{
	nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
	}

	static inline void netwinder_ds1620_set_data(int dat)
	{
	nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
	}

	static inline int netwinder_ds1620_get_data(void)
	{
	return nw_gpio_read() & GPIO_DATA;
	}

	static inline void netwinder_ds1620_set_data_dir(int dir)
	{
	nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
	}

	static inline void netwinder_ds1620_reset(void)
	{
	nw_cpld_modify(CPLD_DS_ENABLE, 0);
	nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
	}

	static inline void netwinder_lock(unsigned long *flags)
	{
	raw_spin_lock_irqsave(&nw_gpio_lock, *flags);
	}

	static inline void netwinder_unlock(unsigned long *flags)
	{
	raw_spin_unlock_irqrestore(&nw_gpio_lock, *flags);
	}

	static inline void netwinder_set_fan(int i)
	{
	unsigned long flags;

	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
	nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
	}

	static inline int netwinder_get_fan(void)
	{
	if ((system_rev & 0xf000) == 0x4000)
	return FAN_ALWAYS_ON;

	return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
	}

	/*
	* End of NetWinder specifics
	*/

	static void ds1620_send_bits(int nr, int value)
	{
	int i;

	for (i = 0; i < nr; i++) {
	netwinder_ds1620_set_data(value & 1);
	netwinder_ds1620_set_clk(0);
	udelay(1);
	netwinder_ds1620_set_clk(1);
	udelay(1);

	value >>= 1;
	}
	}

	static unsigned int ds1620_recv_bits(int nr)
	{
	unsigned int value = 0, mask = 1;
	int i;

	netwinder_ds1620_set_data(0);

	for (i = 0; i < nr; i++) {
	netwinder_ds1620_set_clk(0);
	udelay(1);

	if (netwinder_ds1620_get_data())
	value \|= mask;

	mask <<= 1;

	netwinder_ds1620_set_clk(1);
	udelay(1);
	}

	return value;
	}

	static void ds1620_out(int cmd, int bits, int value)
	{
	unsigned long flags;

	netwinder_lock(&flags);
	netwinder_ds1620_set_clk(1);
	netwinder_ds1620_set_data_dir(0);
	netwinder_ds1620_reset();

	udelay(1);

	ds1620_send_bits(8, cmd);
	if (bits)
	ds1620_send_bits(bits, value);

	udelay(1);

	netwinder_ds1620_reset();
	netwinder_unlock(&flags);

	msleep(20);
	}

	static unsigned int ds1620_in(int cmd, int bits)
	{
	unsigned long flags;
	unsigned int value;

	netwinder_lock(&flags);
	netwinder_ds1620_set_clk(1);
	netwinder_ds1620_set_data_dir(0);
	netwinder_ds1620_reset();

	udelay(1);

	ds1620_send_bits(8, cmd);

	netwinder_ds1620_set_data_dir(1);
	value = ds1620_recv_bits(bits);

	netwinder_ds1620_reset();
	netwinder_unlock(&flags);

	return value;
	}

	static int cvt_9_to_int(unsigned int val)
	{
	if (val & 0x100)
	val \|= 0xfffffe00;

	return val;
	}

	static void ds1620_write_state(struct therm *therm)
	{
	ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
	ds1620_out(THERM_WRITE_TL, 9, therm->lo);
	ds1620_out(THERM_WRITE_TH, 9, therm->hi);
	ds1620_out(THERM_START_CONVERT, 0, 0);
	}

	static void ds1620_read_state(struct therm *therm)
	{
	therm->lo = cvt_9_to_int(ds1620_in(THERM_READ_TL, 9));
	therm->hi = cvt_9_to_int(ds1620_in(THERM_READ_TH, 9));
	}

	static int ds1620_open(struct inode inode, struct file file)
	{
	return nonseekable_open(inode, file);
	}

	static ssize_t
	ds1620_read(struct file file, char __user buf, size_t count, loff_t *ptr)
	{
	signed int cur_temp;
	signed char cur_temp_degF;

	cur_temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9)) >> 1;

	/* convert to Fahrenheit, as per wdt.c */
	cur_temp_degF = (cur_temp * 9) / 5 + 32;

	if (copy_to_user(buf, &cur_temp_degF, 1))
	return -EFAULT;

	return 1;
	}

	static int
	ds1620_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
	{
	struct therm therm;
	union {
	struct therm __user *therm;
	int __user *i;
	} uarg;
	int i;

	uarg.i = (int __user *)arg;

	switch(cmd) {
	case CMD_SET_THERMOSTATE:
	case CMD_SET_THERMOSTATE2:
	if (!capable(CAP_SYS_ADMIN))
	return -EPERM;

	if (cmd == CMD_SET_THERMOSTATE) {
	if (get_user(therm.hi, uarg.i))
	return -EFAULT;
	therm.lo = therm.hi - 3;
	} else {
	if (copy_from_user(&therm, uarg.therm, sizeof(therm)))
	return -EFAULT;
	}

	therm.lo <<= 1;
	therm.hi <<= 1;

	ds1620_write_state(&therm);
	break;

	case CMD_GET_THERMOSTATE:
	case CMD_GET_THERMOSTATE2:
	ds1620_read_state(&therm);

	therm.lo >>= 1;
	therm.hi >>= 1;

	if (cmd == CMD_GET_THERMOSTATE) {
	if (put_user(therm.hi, uarg.i))
	return -EFAULT;
	} else {
	if (copy_to_user(uarg.therm, &therm, sizeof(therm)))
	return -EFAULT;
	}
	break;

	case CMD_GET_TEMPERATURE:
	case CMD_GET_TEMPERATURE2:
	i = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));

	if (cmd == CMD_GET_TEMPERATURE)
	i >>= 1;

	return put_user(i, uarg.i) ? -EFAULT : 0;

	case CMD_GET_STATUS:
	i = ds1620_in(THERM_READ_CONFIG, 8) & 0xe3;

	return put_user(i, uarg.i) ? -EFAULT : 0;

	case CMD_GET_FAN:
	i = netwinder_get_fan();

	return put_user(i, uarg.i) ? -EFAULT : 0;

	case CMD_SET_FAN:
	if (!capable(CAP_SYS_ADMIN))
	return -EPERM;

	if (get_user(i, uarg.i))
	return -EFAULT;

	netwinder_set_fan(i);
	break;

	default:
	return -ENOIOCTLCMD;
	}

	return 0;
	}

	static long
	ds1620_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
	{
	int ret;

	mutex_lock(&ds1620_mutex);
	ret = ds1620_ioctl(file, cmd, arg);
	mutex_unlock(&ds1620_mutex);

	return ret;
	}

	#ifdef THERM_USE_PROC
	static int ds1620_proc_therm_show(struct seq_file m, void v)
	{
	struct therm th;
	int temp;

	ds1620_read_state(&th);
	temp = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));

	seq_printf(m, "Thermostat: HI %i.%i, LOW %i.%i; temperature: %i.%i C, fan %s\n",
	th.hi >> 1, th.hi & 1 ? 5 : 0,
	th.lo >> 1, th.lo & 1 ? 5 : 0,
	temp >> 1, temp & 1 ? 5 : 0,
	fan_state[netwinder_get_fan()]);
	return 0;
	}

	static int ds1620_proc_therm_open(struct inode inode, struct file file)
	{
	return single_open(file, ds1620_proc_therm_show, NULL);
	}

	static const struct file_operations ds1620_proc_therm_fops = {
	.open = ds1620_proc_therm_open,
	.read = seq_read,
	.llseek = seq_lseek,
	.release = single_release,
	};
	#endif

	static const struct file_operations ds1620_fops = {
	.owner = THIS_MODULE,
	.open = ds1620_open,
	.read = ds1620_read,
	.unlocked_ioctl = ds1620_unlocked_ioctl,
	.llseek = no_llseek,
	};

	static struct miscdevice ds1620_miscdev = {
	TEMP_MINOR,
	"temp",
	&ds1620_fops
	};

	static int __init ds1620_init(void)
	{
	int ret;
	struct therm th, th_start;

	if (!machine_is_netwinder())
	return -ENODEV;

	ds1620_out(THERM_RESET, 0, 0);
	ds1620_out(THERM_WRITE_CONFIG, 8, CFG_CPU);
	ds1620_out(THERM_START_CONVERT, 0, 0);

	/*
	* Trigger the fan to start by setting
	* temperature high point low. This kicks
	* the fan into action.
	*/
	ds1620_read_state(&th);
	th_start.lo = 0;
	th_start.hi = 1;
	ds1620_write_state(&th_start);

	msleep(2000);

	ds1620_write_state(&th);

	ret = misc_register(&ds1620_miscdev);
	if (ret < 0)
	return ret;

	#ifdef THERM_USE_PROC
	if (!proc_create("therm", 0, NULL, &ds1620_proc_therm_fops))
	printk(KERN_ERR "therm: unable to register /proc/therm\n");
	#endif

	ds1620_read_state(&th);
	ret = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));

	printk(KERN_INFO "Thermostat: high %i.%i, low %i.%i, "
	"current %i.%i C, fan %s.\n",
	th.hi >> 1, th.hi & 1 ? 5 : 0,
	th.lo >> 1, th.lo & 1 ? 5 : 0,
	ret >> 1, ret & 1 ? 5 : 0,
	fan_state[netwinder_get_fan()]);

	return 0;
	}

	static void __exit ds1620_exit(void)
	{
	#ifdef THERM_USE_PROC
	remove_proc_entry("therm", NULL);
	#endif
	misc_deregister(&ds1620_miscdev);
	}

	module_init(ds1620_init);
	module_exit(ds1620_exit);

	MODULE_LICENSE("GPL");