| /* |
| * CLPS711X SPI bus driver |
| * |
| * Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/clps711x.h> |
| #include <linux/spi/spi.h> |
| #include <linux/platform_data/spi-clps711x.h> |
| |
| #define DRIVER_NAME "spi-clps711x" |
| |
| #define SYNCIO_FRMLEN(x) ((x) << 8) |
| #define SYNCIO_TXFRMEN (1 << 14) |
| |
| struct spi_clps711x_data { |
| void __iomem *syncio; |
| struct regmap *syscon; |
| struct regmap *syscon1; |
| struct clk *spi_clk; |
| |
| u8 *tx_buf; |
| u8 *rx_buf; |
| unsigned int bpw; |
| int len; |
| }; |
| |
| static int spi_clps711x_setup(struct spi_device *spi) |
| { |
| /* We are expect that SPI-device is not selected */ |
| gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); |
| |
| return 0; |
| } |
| |
| static void spi_clps711x_setup_xfer(struct spi_device *spi, |
| struct spi_transfer *xfer) |
| { |
| struct spi_master *master = spi->master; |
| struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| |
| /* Setup SPI frequency divider */ |
| if (xfer->speed_hz >= master->max_speed_hz) |
| regmap_update_bits(hw->syscon1, SYSCON_OFFSET, |
| SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(3)); |
| else if (xfer->speed_hz >= (master->max_speed_hz / 2)) |
| regmap_update_bits(hw->syscon1, SYSCON_OFFSET, |
| SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(2)); |
| else if (xfer->speed_hz >= (master->max_speed_hz / 8)) |
| regmap_update_bits(hw->syscon1, SYSCON_OFFSET, |
| SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(1)); |
| else |
| regmap_update_bits(hw->syscon1, SYSCON_OFFSET, |
| SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(0)); |
| } |
| |
| static int spi_clps711x_prepare_message(struct spi_master *master, |
| struct spi_message *msg) |
| { |
| struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| struct spi_device *spi = msg->spi; |
| |
| /* Setup mode for transfer */ |
| return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN, |
| (spi->mode & SPI_CPHA) ? |
| SYSCON3_ADCCKNSEN : 0); |
| } |
| |
| static int spi_clps711x_transfer_one(struct spi_master *master, |
| struct spi_device *spi, |
| struct spi_transfer *xfer) |
| { |
| struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| u8 data; |
| |
| spi_clps711x_setup_xfer(spi, xfer); |
| |
| hw->len = xfer->len; |
| hw->bpw = xfer->bits_per_word; |
| hw->tx_buf = (u8 *)xfer->tx_buf; |
| hw->rx_buf = (u8 *)xfer->rx_buf; |
| |
| /* Initiate transfer */ |
| data = hw->tx_buf ? *hw->tx_buf++ : 0; |
| writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio); |
| |
| return 1; |
| } |
| |
| static irqreturn_t spi_clps711x_isr(int irq, void *dev_id) |
| { |
| struct spi_master *master = dev_id; |
| struct spi_clps711x_data *hw = spi_master_get_devdata(master); |
| u8 data; |
| |
| /* Handle RX */ |
| data = readb(hw->syncio); |
| if (hw->rx_buf) |
| *hw->rx_buf++ = data; |
| |
| /* Handle TX */ |
| if (--hw->len > 0) { |
| data = hw->tx_buf ? *hw->tx_buf++ : 0; |
| writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, |
| hw->syncio); |
| } else |
| spi_finalize_current_transfer(master); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int spi_clps711x_probe(struct platform_device *pdev) |
| { |
| struct spi_clps711x_data *hw; |
| struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct spi_master *master; |
| struct resource *res; |
| int i, irq, ret; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform data supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (pdata->num_chipselect < 1) { |
| dev_err(&pdev->dev, "At least one CS must be defined\n"); |
| return -EINVAL; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*hw)); |
| if (!master) |
| return -ENOMEM; |
| |
| master->cs_gpios = devm_kzalloc(&pdev->dev, sizeof(int) * |
| pdata->num_chipselect, GFP_KERNEL); |
| if (!master->cs_gpios) { |
| ret = -ENOMEM; |
| goto err_out; |
| } |
| |
| master->bus_num = pdev->id; |
| master->mode_bits = SPI_CPHA | SPI_CS_HIGH; |
| master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8); |
| master->num_chipselect = pdata->num_chipselect; |
| master->setup = spi_clps711x_setup; |
| master->prepare_message = spi_clps711x_prepare_message; |
| master->transfer_one = spi_clps711x_transfer_one; |
| |
| hw = spi_master_get_devdata(master); |
| |
| for (i = 0; i < master->num_chipselect; i++) { |
| master->cs_gpios[i] = pdata->chipselect[i]; |
| ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i], |
| DRIVER_NAME); |
| if (ret) { |
| dev_err(&pdev->dev, "Can't get CS GPIO %i\n", i); |
| goto err_out; |
| } |
| } |
| |
| hw->spi_clk = devm_clk_get(&pdev->dev, "spi"); |
| if (IS_ERR(hw->spi_clk)) { |
| dev_err(&pdev->dev, "Can't get clocks\n"); |
| ret = PTR_ERR(hw->spi_clk); |
| goto err_out; |
| } |
| master->max_speed_hz = clk_get_rate(hw->spi_clk); |
| |
| platform_set_drvdata(pdev, master); |
| |
| hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3"); |
| if (IS_ERR(hw->syscon)) { |
| ret = PTR_ERR(hw->syscon); |
| goto err_out; |
| } |
| |
| hw->syscon1 = syscon_regmap_lookup_by_pdevname("syscon.1"); |
| if (IS_ERR(hw->syscon1)) { |
| ret = PTR_ERR(hw->syscon1); |
| goto err_out; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| hw->syncio = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(hw->syncio)) { |
| ret = PTR_ERR(hw->syncio); |
| goto err_out; |
| } |
| |
| /* Disable extended mode due hardware problems */ |
| regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0); |
| |
| /* Clear possible pending interrupt */ |
| readl(hw->syncio); |
| |
| ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0, |
| dev_name(&pdev->dev), master); |
| if (ret) |
| goto err_out; |
| |
| ret = devm_spi_register_master(&pdev->dev, master); |
| if (!ret) { |
| dev_info(&pdev->dev, |
| "SPI bus driver initialized. Master clock %u Hz\n", |
| master->max_speed_hz); |
| return 0; |
| } |
| |
| dev_err(&pdev->dev, "Failed to register master\n"); |
| |
| err_out: |
| spi_master_put(master); |
| |
| return ret; |
| } |
| |
| static struct platform_driver clps711x_spi_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| .probe = spi_clps711x_probe, |
| }; |
| module_platform_driver(clps711x_spi_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); |
| MODULE_DESCRIPTION("CLPS711X SPI bus driver"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |