| /* |
| * Watchdog Timer Driver |
| * for ITE IT87xx Environment Control - Low Pin Count Input / Output |
| * |
| * (c) Copyright 2007 Oliver Schuster <olivers137@aol.com> |
| * |
| * Based on softdog.c by Alan Cox, |
| * 83977f_wdt.c by Jose Goncalves, |
| * it87.c by Chris Gauthron, Jean Delvare |
| * |
| * Data-sheets: Publicly available at the ITE website |
| * http://www.ite.com.tw/ |
| * |
| * Support of the watchdog timers, which are available on |
| * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 |
| * and IT8728. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/watchdog.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| |
| |
| #define WATCHDOG_VERSION "1.14" |
| #define WATCHDOG_NAME "IT87 WDT" |
| #define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" |
| #define WD_MAGIC 'V' |
| |
| /* Defaults for Module Parameter */ |
| #define DEFAULT_NOGAMEPORT 0 |
| #define DEFAULT_NOCIR 0 |
| #define DEFAULT_EXCLUSIVE 1 |
| #define DEFAULT_TIMEOUT 60 |
| #define DEFAULT_TESTMODE 0 |
| #define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT |
| |
| /* IO Ports */ |
| #define REG 0x2e |
| #define VAL 0x2f |
| |
| /* Logical device Numbers LDN */ |
| #define GPIO 0x07 |
| #define GAMEPORT 0x09 |
| #define CIR 0x0a |
| |
| /* Configuration Registers and Functions */ |
| #define LDNREG 0x07 |
| #define CHIPID 0x20 |
| #define CHIPREV 0x22 |
| #define ACTREG 0x30 |
| #define BASEREG 0x60 |
| |
| /* Chip Id numbers */ |
| #define NO_DEV_ID 0xffff |
| #define IT8702_ID 0x8702 |
| #define IT8705_ID 0x8705 |
| #define IT8712_ID 0x8712 |
| #define IT8716_ID 0x8716 |
| #define IT8718_ID 0x8718 |
| #define IT8720_ID 0x8720 |
| #define IT8721_ID 0x8721 |
| #define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */ |
| #define IT8728_ID 0x8728 |
| |
| /* GPIO Configuration Registers LDN=0x07 */ |
| #define WDTCTRL 0x71 |
| #define WDTCFG 0x72 |
| #define WDTVALLSB 0x73 |
| #define WDTVALMSB 0x74 |
| |
| /* GPIO Bits WDTCTRL */ |
| #define WDT_CIRINT 0x80 |
| #define WDT_MOUSEINT 0x40 |
| #define WDT_KYBINT 0x20 |
| #define WDT_GAMEPORT 0x10 /* not in it8718, it8720, it8721, it8728 */ |
| #define WDT_FORCE 0x02 |
| #define WDT_ZERO 0x01 |
| |
| /* GPIO Bits WDTCFG */ |
| #define WDT_TOV1 0x80 |
| #define WDT_KRST 0x40 |
| #define WDT_TOVE 0x20 |
| #define WDT_PWROK 0x10 /* not in it8721 */ |
| #define WDT_INT_MASK 0x0f |
| |
| /* CIR Configuration Register LDN=0x0a */ |
| #define CIR_ILS 0x70 |
| |
| /* The default Base address is not always available, we use this */ |
| #define CIR_BASE 0x0208 |
| |
| /* CIR Controller */ |
| #define CIR_DR(b) (b) |
| #define CIR_IER(b) (b + 1) |
| #define CIR_RCR(b) (b + 2) |
| #define CIR_TCR1(b) (b + 3) |
| #define CIR_TCR2(b) (b + 4) |
| #define CIR_TSR(b) (b + 5) |
| #define CIR_RSR(b) (b + 6) |
| #define CIR_BDLR(b) (b + 5) |
| #define CIR_BDHR(b) (b + 6) |
| #define CIR_IIR(b) (b + 7) |
| |
| /* Default Base address of Game port */ |
| #define GP_BASE_DEFAULT 0x0201 |
| |
| /* wdt_status */ |
| #define WDTS_TIMER_RUN 0 |
| #define WDTS_DEV_OPEN 1 |
| #define WDTS_KEEPALIVE 2 |
| #define WDTS_LOCKED 3 |
| #define WDTS_USE_GP 4 |
| #define WDTS_EXPECTED 5 |
| #define WDTS_USE_CIR 6 |
| |
| static unsigned int base, gpact, ciract, max_units, chip_type; |
| static unsigned long wdt_status; |
| |
| static int nogameport = DEFAULT_NOGAMEPORT; |
| static int nocir = DEFAULT_NOCIR; |
| static int exclusive = DEFAULT_EXCLUSIVE; |
| static int timeout = DEFAULT_TIMEOUT; |
| static int testmode = DEFAULT_TESTMODE; |
| static bool nowayout = DEFAULT_NOWAYOUT; |
| |
| module_param(nogameport, int, 0); |
| MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" |
| __MODULE_STRING(DEFAULT_NOGAMEPORT)); |
| module_param(nocir, int, 0); |
| MODULE_PARM_DESC(nocir, "Forbid the use of Consumer IR interrupts to reset timer, default=" |
| __MODULE_STRING(DEFAULT_NOCIR)); |
| module_param(exclusive, int, 0); |
| MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default=" |
| __MODULE_STRING(DEFAULT_EXCLUSIVE)); |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" |
| __MODULE_STRING(DEFAULT_TIMEOUT)); |
| module_param(testmode, int, 0); |
| MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" |
| __MODULE_STRING(DEFAULT_TESTMODE)); |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT)); |
| |
| /* Superio Chip */ |
| |
| static inline int superio_enter(void) |
| { |
| /* |
| * Try to reserve REG and REG + 1 for exclusive access. |
| */ |
| if (!request_muxed_region(REG, 2, WATCHDOG_NAME)) |
| return -EBUSY; |
| |
| outb(0x87, REG); |
| outb(0x01, REG); |
| outb(0x55, REG); |
| outb(0x55, REG); |
| return 0; |
| } |
| |
| static inline void superio_exit(void) |
| { |
| outb(0x02, REG); |
| outb(0x02, VAL); |
| release_region(REG, 2); |
| } |
| |
| static inline void superio_select(int ldn) |
| { |
| outb(LDNREG, REG); |
| outb(ldn, VAL); |
| } |
| |
| static inline int superio_inb(int reg) |
| { |
| outb(reg, REG); |
| return inb(VAL); |
| } |
| |
| static inline void superio_outb(int val, int reg) |
| { |
| outb(reg, REG); |
| outb(val, VAL); |
| } |
| |
| static inline int superio_inw(int reg) |
| { |
| int val; |
| outb(reg++, REG); |
| val = inb(VAL) << 8; |
| outb(reg, REG); |
| val |= inb(VAL); |
| return val; |
| } |
| |
| static inline void superio_outw(int val, int reg) |
| { |
| outb(reg++, REG); |
| outb(val >> 8, VAL); |
| outb(reg, REG); |
| outb(val, VAL); |
| } |
| |
| /* Internal function, should be called after superio_select(GPIO) */ |
| static void wdt_update_timeout(void) |
| { |
| unsigned char cfg = WDT_KRST; |
| int tm = timeout; |
| |
| if (testmode) |
| cfg = 0; |
| |
| if (tm <= max_units) |
| cfg |= WDT_TOV1; |
| else |
| tm /= 60; |
| |
| if (chip_type != IT8721_ID) |
| cfg |= WDT_PWROK; |
| |
| superio_outb(cfg, WDTCFG); |
| superio_outb(tm, WDTVALLSB); |
| if (max_units > 255) |
| superio_outb(tm>>8, WDTVALMSB); |
| } |
| |
| static int wdt_round_time(int t) |
| { |
| t += 59; |
| t -= t % 60; |
| return t; |
| } |
| |
| /* watchdog timer handling */ |
| |
| static void wdt_keepalive(void) |
| { |
| if (test_bit(WDTS_USE_GP, &wdt_status)) |
| inb(base); |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) |
| /* The timer reloads with around 5 msec delay */ |
| outb(0x55, CIR_DR(base)); |
| else { |
| if (superio_enter()) |
| return; |
| |
| superio_select(GPIO); |
| wdt_update_timeout(); |
| superio_exit(); |
| } |
| set_bit(WDTS_KEEPALIVE, &wdt_status); |
| } |
| |
| static int wdt_start(void) |
| { |
| int ret = superio_enter(); |
| if (ret) |
| return ret; |
| |
| superio_select(GPIO); |
| if (test_bit(WDTS_USE_GP, &wdt_status)) |
| superio_outb(WDT_GAMEPORT, WDTCTRL); |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) |
| superio_outb(WDT_CIRINT, WDTCTRL); |
| wdt_update_timeout(); |
| |
| superio_exit(); |
| |
| return 0; |
| } |
| |
| static int wdt_stop(void) |
| { |
| int ret = superio_enter(); |
| if (ret) |
| return ret; |
| |
| superio_select(GPIO); |
| superio_outb(0x00, WDTCTRL); |
| superio_outb(WDT_TOV1, WDTCFG); |
| superio_outb(0x00, WDTVALLSB); |
| if (max_units > 255) |
| superio_outb(0x00, WDTVALMSB); |
| |
| superio_exit(); |
| return 0; |
| } |
| |
| /** |
| * wdt_set_timeout - set a new timeout value with watchdog ioctl |
| * @t: timeout value in seconds |
| * |
| * The hardware device has a 8 or 16 bit watchdog timer (depends on |
| * chip version) that can be configured to count seconds or minutes. |
| * |
| * Used within WDIOC_SETTIMEOUT watchdog device ioctl. |
| */ |
| |
| static int wdt_set_timeout(int t) |
| { |
| if (t < 1 || t > max_units * 60) |
| return -EINVAL; |
| |
| if (t > max_units) |
| timeout = wdt_round_time(t); |
| else |
| timeout = t; |
| |
| if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { |
| int ret = superio_enter(); |
| if (ret) |
| return ret; |
| |
| superio_select(GPIO); |
| wdt_update_timeout(); |
| superio_exit(); |
| } |
| return 0; |
| } |
| |
| /** |
| * wdt_get_status - determines the status supported by watchdog ioctl |
| * @status: status returned to user space |
| * |
| * The status bit of the device does not allow to distinguish |
| * between a regular system reset and a watchdog forced reset. |
| * But, in test mode it is useful, so it is supported through |
| * WDIOC_GETSTATUS watchdog ioctl. Additionally the driver |
| * reports the keepalive signal and the acception of the magic. |
| * |
| * Used within WDIOC_GETSTATUS watchdog device ioctl. |
| */ |
| |
| static int wdt_get_status(int *status) |
| { |
| *status = 0; |
| if (testmode) { |
| int ret = superio_enter(); |
| if (ret) |
| return ret; |
| |
| superio_select(GPIO); |
| if (superio_inb(WDTCTRL) & WDT_ZERO) { |
| superio_outb(0x00, WDTCTRL); |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); |
| *status |= WDIOF_CARDRESET; |
| } |
| |
| superio_exit(); |
| } |
| if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status)) |
| *status |= WDIOF_KEEPALIVEPING; |
| if (test_bit(WDTS_EXPECTED, &wdt_status)) |
| *status |= WDIOF_MAGICCLOSE; |
| return 0; |
| } |
| |
| /* /dev/watchdog handling */ |
| |
| /** |
| * wdt_open - watchdog file_operations .open |
| * @inode: inode of the device |
| * @file: file handle to the device |
| * |
| * The watchdog timer starts by opening the device. |
| * |
| * Used within the file operation of the watchdog device. |
| */ |
| |
| static int wdt_open(struct inode *inode, struct file *file) |
| { |
| if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status)) |
| return -EBUSY; |
| if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { |
| int ret; |
| if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status)) |
| __module_get(THIS_MODULE); |
| |
| ret = wdt_start(); |
| if (ret) { |
| clear_bit(WDTS_LOCKED, &wdt_status); |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); |
| clear_bit(WDTS_DEV_OPEN, &wdt_status); |
| return ret; |
| } |
| } |
| return nonseekable_open(inode, file); |
| } |
| |
| /** |
| * wdt_release - watchdog file_operations .release |
| * @inode: inode of the device |
| * @file: file handle to the device |
| * |
| * Closing the watchdog device either stops the watchdog timer |
| * or in the case, that nowayout is set or the magic character |
| * wasn't written, a critical warning about an running watchdog |
| * timer is given. |
| * |
| * Used within the file operation of the watchdog device. |
| */ |
| |
| static int wdt_release(struct inode *inode, struct file *file) |
| { |
| if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { |
| if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) { |
| int ret = wdt_stop(); |
| if (ret) { |
| /* |
| * Stop failed. Just keep the watchdog alive |
| * and hope nothing bad happens. |
| */ |
| set_bit(WDTS_EXPECTED, &wdt_status); |
| wdt_keepalive(); |
| return ret; |
| } |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); |
| } else { |
| wdt_keepalive(); |
| pr_crit("unexpected close, not stopping watchdog!\n"); |
| } |
| } |
| clear_bit(WDTS_DEV_OPEN, &wdt_status); |
| return 0; |
| } |
| |
| /** |
| * wdt_write - watchdog file_operations .write |
| * @file: file handle to the watchdog |
| * @buf: buffer to write |
| * @count: count of bytes |
| * @ppos: pointer to the position to write. No seeks allowed |
| * |
| * A write to a watchdog device is defined as a keepalive signal. Any |
| * write of data will do, as we don't define content meaning. |
| * |
| * Used within the file operation of the watchdog device. |
| */ |
| |
| static ssize_t wdt_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| if (count) { |
| clear_bit(WDTS_EXPECTED, &wdt_status); |
| wdt_keepalive(); |
| } |
| if (!nowayout) { |
| size_t ofs; |
| |
| /* note: just in case someone wrote the magic character long ago */ |
| for (ofs = 0; ofs != count; ofs++) { |
| char c; |
| if (get_user(c, buf + ofs)) |
| return -EFAULT; |
| if (c == WD_MAGIC) |
| set_bit(WDTS_EXPECTED, &wdt_status); |
| } |
| } |
| return count; |
| } |
| |
| static const struct watchdog_info ident = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, |
| .firmware_version = 1, |
| .identity = WATCHDOG_NAME, |
| }; |
| |
| /** |
| * wdt_ioctl - watchdog file_operations .unlocked_ioctl |
| * @file: file handle to the device |
| * @cmd: watchdog command |
| * @arg: argument pointer |
| * |
| * The watchdog API defines a common set of functions for all watchdogs |
| * according to their available features. |
| * |
| * Used within the file operation of the watchdog device. |
| */ |
| |
| static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| int rc = 0, status, new_options, new_timeout; |
| union { |
| struct watchdog_info __user *ident; |
| int __user *i; |
| } uarg; |
| |
| uarg.i = (int __user *)arg; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(uarg.ident, |
| &ident, sizeof(ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| rc = wdt_get_status(&status); |
| if (rc) |
| return rc; |
| return put_user(status, uarg.i); |
| |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, uarg.i); |
| |
| case WDIOC_KEEPALIVE: |
| wdt_keepalive(); |
| return 0; |
| |
| case WDIOC_SETOPTIONS: |
| if (get_user(new_options, uarg.i)) |
| return -EFAULT; |
| |
| switch (new_options) { |
| case WDIOS_DISABLECARD: |
| if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { |
| rc = wdt_stop(); |
| if (rc) |
| return rc; |
| } |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); |
| return 0; |
| |
| case WDIOS_ENABLECARD: |
| if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { |
| rc = wdt_start(); |
| if (rc) { |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); |
| return rc; |
| } |
| } |
| return 0; |
| |
| default: |
| return -EFAULT; |
| } |
| |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_timeout, uarg.i)) |
| return -EFAULT; |
| rc = wdt_set_timeout(new_timeout); |
| case WDIOC_GETTIMEOUT: |
| if (put_user(timeout, uarg.i)) |
| return -EFAULT; |
| return rc; |
| |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| static int wdt_notify_sys(struct notifier_block *this, unsigned long code, |
| void *unused) |
| { |
| if (code == SYS_DOWN || code == SYS_HALT) |
| wdt_stop(); |
| return NOTIFY_DONE; |
| } |
| |
| static const struct file_operations wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = wdt_write, |
| .unlocked_ioctl = wdt_ioctl, |
| .open = wdt_open, |
| .release = wdt_release, |
| }; |
| |
| static struct miscdevice wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &wdt_fops, |
| }; |
| |
| static struct notifier_block wdt_notifier = { |
| .notifier_call = wdt_notify_sys, |
| }; |
| |
| static int __init it87_wdt_init(void) |
| { |
| int rc = 0; |
| int try_gameport = !nogameport; |
| u8 chip_rev; |
| int gp_rreq_fail = 0; |
| |
| wdt_status = 0; |
| |
| rc = superio_enter(); |
| if (rc) |
| return rc; |
| |
| chip_type = superio_inw(CHIPID); |
| chip_rev = superio_inb(CHIPREV) & 0x0f; |
| superio_exit(); |
| |
| switch (chip_type) { |
| case IT8702_ID: |
| max_units = 255; |
| break; |
| case IT8712_ID: |
| max_units = (chip_rev < 8) ? 255 : 65535; |
| break; |
| case IT8716_ID: |
| case IT8726_ID: |
| max_units = 65535; |
| break; |
| case IT8718_ID: |
| case IT8720_ID: |
| case IT8721_ID: |
| case IT8728_ID: |
| max_units = 65535; |
| try_gameport = 0; |
| break; |
| case IT8705_ID: |
| pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", |
| chip_type, chip_rev); |
| return -ENODEV; |
| case NO_DEV_ID: |
| pr_err("no device\n"); |
| return -ENODEV; |
| default: |
| pr_err("Unknown Chip found, Chip %04x Revision %04x\n", |
| chip_type, chip_rev); |
| return -ENODEV; |
| } |
| |
| rc = superio_enter(); |
| if (rc) |
| return rc; |
| |
| superio_select(GPIO); |
| superio_outb(WDT_TOV1, WDTCFG); |
| superio_outb(0x00, WDTCTRL); |
| |
| /* First try to get Gameport support */ |
| if (try_gameport) { |
| superio_select(GAMEPORT); |
| base = superio_inw(BASEREG); |
| if (!base) { |
| base = GP_BASE_DEFAULT; |
| superio_outw(base, BASEREG); |
| } |
| gpact = superio_inb(ACTREG); |
| superio_outb(0x01, ACTREG); |
| if (request_region(base, 1, WATCHDOG_NAME)) |
| set_bit(WDTS_USE_GP, &wdt_status); |
| else |
| gp_rreq_fail = 1; |
| } |
| |
| /* If we haven't Gameport support, try to get CIR support */ |
| if (!nocir && !test_bit(WDTS_USE_GP, &wdt_status)) { |
| if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) { |
| if (gp_rreq_fail) |
| pr_err("I/O Address 0x%04x and 0x%04x already in use\n", |
| base, CIR_BASE); |
| else |
| pr_err("I/O Address 0x%04x already in use\n", |
| CIR_BASE); |
| rc = -EIO; |
| goto err_out; |
| } |
| base = CIR_BASE; |
| |
| superio_select(CIR); |
| superio_outw(base, BASEREG); |
| superio_outb(0x00, CIR_ILS); |
| ciract = superio_inb(ACTREG); |
| superio_outb(0x01, ACTREG); |
| if (gp_rreq_fail) { |
| superio_select(GAMEPORT); |
| superio_outb(gpact, ACTREG); |
| } |
| set_bit(WDTS_USE_CIR, &wdt_status); |
| } |
| |
| if (timeout < 1 || timeout > max_units * 60) { |
| timeout = DEFAULT_TIMEOUT; |
| pr_warn("Timeout value out of range, use default %d sec\n", |
| DEFAULT_TIMEOUT); |
| } |
| |
| if (timeout > max_units) |
| timeout = wdt_round_time(timeout); |
| |
| rc = register_reboot_notifier(&wdt_notifier); |
| if (rc) { |
| pr_err("Cannot register reboot notifier (err=%d)\n", rc); |
| goto err_out_region; |
| } |
| |
| rc = misc_register(&wdt_miscdev); |
| if (rc) { |
| pr_err("Cannot register miscdev on minor=%d (err=%d)\n", |
| wdt_miscdev.minor, rc); |
| goto err_out_reboot; |
| } |
| |
| /* Initialize CIR to use it as keepalive source */ |
| if (test_bit(WDTS_USE_CIR, &wdt_status)) { |
| outb(0x00, CIR_RCR(base)); |
| outb(0xc0, CIR_TCR1(base)); |
| outb(0x5c, CIR_TCR2(base)); |
| outb(0x10, CIR_IER(base)); |
| outb(0x00, CIR_BDHR(base)); |
| outb(0x01, CIR_BDLR(base)); |
| outb(0x09, CIR_IER(base)); |
| } |
| |
| pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d exclusive=%d nogameport=%d nocir=%d)\n", |
| chip_type, chip_rev, timeout, |
| nowayout, testmode, exclusive, nogameport, nocir); |
| |
| superio_exit(); |
| return 0; |
| |
| err_out_reboot: |
| unregister_reboot_notifier(&wdt_notifier); |
| err_out_region: |
| if (test_bit(WDTS_USE_GP, &wdt_status)) |
| release_region(base, 1); |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) { |
| release_region(base, 8); |
| superio_select(CIR); |
| superio_outb(ciract, ACTREG); |
| } |
| err_out: |
| if (try_gameport) { |
| superio_select(GAMEPORT); |
| superio_outb(gpact, ACTREG); |
| } |
| |
| superio_exit(); |
| return rc; |
| } |
| |
| static void __exit it87_wdt_exit(void) |
| { |
| if (superio_enter() == 0) { |
| superio_select(GPIO); |
| superio_outb(0x00, WDTCTRL); |
| superio_outb(0x00, WDTCFG); |
| superio_outb(0x00, WDTVALLSB); |
| if (max_units > 255) |
| superio_outb(0x00, WDTVALMSB); |
| if (test_bit(WDTS_USE_GP, &wdt_status)) { |
| superio_select(GAMEPORT); |
| superio_outb(gpact, ACTREG); |
| } else if (test_bit(WDTS_USE_CIR, &wdt_status)) { |
| superio_select(CIR); |
| superio_outb(ciract, ACTREG); |
| } |
| superio_exit(); |
| } |
| |
| misc_deregister(&wdt_miscdev); |
| unregister_reboot_notifier(&wdt_notifier); |
| |
| if (test_bit(WDTS_USE_GP, &wdt_status)) |
| release_region(base, 1); |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) |
| release_region(base, 8); |
| } |
| |
| module_init(it87_wdt_init); |
| module_exit(it87_wdt_exit); |
| |
| MODULE_AUTHOR("Oliver Schuster"); |
| MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); |
| MODULE_LICENSE("GPL"); |