| /** |
| * Copyright (C) 2005 - 2013 Emulex |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. The full GNU General |
| * Public License is included in this distribution in the file called COPYING. |
| * |
| * Written by: Jayamohan Kallickal (jayamohan.kallickal@emulex.com) |
| * |
| * Contact Information: |
| * linux-drivers@emulex.com |
| * |
| * Emulex |
| * 3333 Susan Street |
| * Costa Mesa, CA 92626 |
| */ |
| |
| #include <scsi/libiscsi.h> |
| #include <scsi/scsi_transport_iscsi.h> |
| #include <scsi/scsi_transport.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_netlink.h> |
| #include <net/netlink.h> |
| #include <scsi/scsi.h> |
| |
| #include "be_iscsi.h" |
| |
| extern struct iscsi_transport beiscsi_iscsi_transport; |
| |
| /** |
| * beiscsi_session_create - creates a new iscsi session |
| * @cmds_max: max commands supported |
| * @qdepth: max queue depth supported |
| * @initial_cmdsn: initial iscsi CMDSN |
| */ |
| struct iscsi_cls_session *beiscsi_session_create(struct iscsi_endpoint *ep, |
| u16 cmds_max, |
| u16 qdepth, |
| u32 initial_cmdsn) |
| { |
| struct Scsi_Host *shost; |
| struct beiscsi_endpoint *beiscsi_ep; |
| struct iscsi_cls_session *cls_session; |
| struct beiscsi_hba *phba; |
| struct iscsi_session *sess; |
| struct beiscsi_session *beiscsi_sess; |
| struct beiscsi_io_task *io_task; |
| |
| |
| if (!ep) { |
| printk(KERN_ERR |
| "beiscsi_session_create: invalid ep\n"); |
| return NULL; |
| } |
| beiscsi_ep = ep->dd_data; |
| phba = beiscsi_ep->phba; |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : PCI_ERROR Recovery\n"); |
| return NULL; |
| } else { |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_session_create\n"); |
| } |
| |
| if (cmds_max > beiscsi_ep->phba->params.wrbs_per_cxn) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Cannot handle %d cmds." |
| "Max cmds per session supported is %d. Using %d." |
| "\n", cmds_max, |
| beiscsi_ep->phba->params.wrbs_per_cxn, |
| beiscsi_ep->phba->params.wrbs_per_cxn); |
| |
| cmds_max = beiscsi_ep->phba->params.wrbs_per_cxn; |
| } |
| |
| shost = phba->shost; |
| cls_session = iscsi_session_setup(&beiscsi_iscsi_transport, |
| shost, cmds_max, |
| sizeof(*beiscsi_sess), |
| sizeof(*io_task), |
| initial_cmdsn, ISCSI_MAX_TARGET); |
| if (!cls_session) |
| return NULL; |
| sess = cls_session->dd_data; |
| beiscsi_sess = sess->dd_data; |
| beiscsi_sess->bhs_pool = pci_pool_create("beiscsi_bhs_pool", |
| phba->pcidev, |
| sizeof(struct be_cmd_bhs), |
| 64, 0); |
| if (!beiscsi_sess->bhs_pool) |
| goto destroy_sess; |
| |
| return cls_session; |
| destroy_sess: |
| iscsi_session_teardown(cls_session); |
| return NULL; |
| } |
| |
| /** |
| * beiscsi_session_destroy - destroys iscsi session |
| * @cls_session: pointer to iscsi cls session |
| * |
| * Destroys iSCSI session instance and releases |
| * resources allocated for it. |
| */ |
| void beiscsi_session_destroy(struct iscsi_cls_session *cls_session) |
| { |
| struct iscsi_session *sess = cls_session->dd_data; |
| struct beiscsi_session *beiscsi_sess = sess->dd_data; |
| |
| printk(KERN_INFO "In beiscsi_session_destroy\n"); |
| pci_pool_destroy(beiscsi_sess->bhs_pool); |
| iscsi_session_teardown(cls_session); |
| } |
| |
| /** |
| * beiscsi_conn_create - create an instance of iscsi connection |
| * @cls_session: ptr to iscsi_cls_session |
| * @cid: iscsi cid |
| */ |
| struct iscsi_cls_conn * |
| beiscsi_conn_create(struct iscsi_cls_session *cls_session, u32 cid) |
| { |
| struct beiscsi_hba *phba; |
| struct Scsi_Host *shost; |
| struct iscsi_cls_conn *cls_conn; |
| struct beiscsi_conn *beiscsi_conn; |
| struct iscsi_conn *conn; |
| struct iscsi_session *sess; |
| struct beiscsi_session *beiscsi_sess; |
| |
| shost = iscsi_session_to_shost(cls_session); |
| phba = iscsi_host_priv(shost); |
| |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_conn_create ,cid" |
| "from iscsi layer=%d\n", cid); |
| |
| cls_conn = iscsi_conn_setup(cls_session, sizeof(*beiscsi_conn), cid); |
| if (!cls_conn) |
| return NULL; |
| |
| conn = cls_conn->dd_data; |
| beiscsi_conn = conn->dd_data; |
| beiscsi_conn->ep = NULL; |
| beiscsi_conn->phba = phba; |
| beiscsi_conn->conn = conn; |
| sess = cls_session->dd_data; |
| beiscsi_sess = sess->dd_data; |
| beiscsi_conn->beiscsi_sess = beiscsi_sess; |
| return cls_conn; |
| } |
| |
| /** |
| * beiscsi_bindconn_cid - Bind the beiscsi_conn with phba connection table |
| * @beiscsi_conn: The pointer to beiscsi_conn structure |
| * @phba: The phba instance |
| * @cid: The cid to free |
| */ |
| static int beiscsi_bindconn_cid(struct beiscsi_hba *phba, |
| struct beiscsi_conn *beiscsi_conn, |
| unsigned int cid) |
| { |
| uint16_t cri_index = BE_GET_CRI_FROM_CID(cid); |
| |
| if (phba->conn_table[cri_index]) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Connection table already occupied. Detected clash\n"); |
| |
| return -EINVAL; |
| } else { |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : phba->conn_table[%d]=%p(beiscsi_conn)\n", |
| cri_index, beiscsi_conn); |
| |
| phba->conn_table[cri_index] = beiscsi_conn; |
| } |
| return 0; |
| } |
| |
| /** |
| * beiscsi_conn_bind - Binds iscsi session/connection with TCP connection |
| * @cls_session: pointer to iscsi cls session |
| * @cls_conn: pointer to iscsi cls conn |
| * @transport_fd: EP handle(64 bit) |
| * |
| * This function binds the TCP Conn with iSCSI Connection and Session. |
| */ |
| int beiscsi_conn_bind(struct iscsi_cls_session *cls_session, |
| struct iscsi_cls_conn *cls_conn, |
| u64 transport_fd, int is_leading) |
| { |
| struct iscsi_conn *conn = cls_conn->dd_data; |
| struct beiscsi_conn *beiscsi_conn = conn->dd_data; |
| struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| struct hwi_controller *phwi_ctrlr = phba->phwi_ctrlr; |
| struct hwi_wrb_context *pwrb_context; |
| struct beiscsi_endpoint *beiscsi_ep; |
| struct iscsi_endpoint *ep; |
| |
| ep = iscsi_lookup_endpoint(transport_fd); |
| if (!ep) |
| return -EINVAL; |
| |
| beiscsi_ep = ep->dd_data; |
| |
| if (iscsi_conn_bind(cls_session, cls_conn, is_leading)) |
| return -EINVAL; |
| |
| if (beiscsi_ep->phba != phba) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : beiscsi_ep->hba=%p not equal to phba=%p\n", |
| beiscsi_ep->phba, phba); |
| |
| return -EEXIST; |
| } |
| |
| pwrb_context = &phwi_ctrlr->wrb_context[BE_GET_CRI_FROM_CID( |
| beiscsi_ep->ep_cid)]; |
| |
| beiscsi_conn->beiscsi_conn_cid = beiscsi_ep->ep_cid; |
| beiscsi_conn->ep = beiscsi_ep; |
| beiscsi_ep->conn = beiscsi_conn; |
| beiscsi_conn->doorbell_offset = pwrb_context->doorbell_offset; |
| |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : beiscsi_conn=%p conn=%p ep_cid=%d\n", |
| beiscsi_conn, conn, beiscsi_ep->ep_cid); |
| |
| return beiscsi_bindconn_cid(phba, beiscsi_conn, beiscsi_ep->ep_cid); |
| } |
| |
| static int beiscsi_create_ipv4_iface(struct beiscsi_hba *phba) |
| { |
| if (phba->ipv4_iface) |
| return 0; |
| |
| phba->ipv4_iface = iscsi_create_iface(phba->shost, |
| &beiscsi_iscsi_transport, |
| ISCSI_IFACE_TYPE_IPV4, |
| 0, 0); |
| if (!phba->ipv4_iface) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Could not " |
| "create default IPv4 address.\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int beiscsi_create_ipv6_iface(struct beiscsi_hba *phba) |
| { |
| if (phba->ipv6_iface) |
| return 0; |
| |
| phba->ipv6_iface = iscsi_create_iface(phba->shost, |
| &beiscsi_iscsi_transport, |
| ISCSI_IFACE_TYPE_IPV6, |
| 0, 0); |
| if (!phba->ipv6_iface) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Could not " |
| "create default IPv6 address.\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| void beiscsi_create_def_ifaces(struct beiscsi_hba *phba) |
| { |
| struct be_cmd_get_if_info_resp *if_info; |
| |
| if (!mgmt_get_if_info(phba, BE2_IPV4, &if_info)) { |
| beiscsi_create_ipv4_iface(phba); |
| kfree(if_info); |
| } |
| |
| if (!mgmt_get_if_info(phba, BE2_IPV6, &if_info)) { |
| beiscsi_create_ipv6_iface(phba); |
| kfree(if_info); |
| } |
| } |
| |
| void beiscsi_destroy_def_ifaces(struct beiscsi_hba *phba) |
| { |
| if (phba->ipv6_iface) |
| iscsi_destroy_iface(phba->ipv6_iface); |
| if (phba->ipv4_iface) |
| iscsi_destroy_iface(phba->ipv4_iface); |
| } |
| |
| static int |
| beiscsi_set_static_ip(struct Scsi_Host *shost, |
| struct iscsi_iface_param_info *iface_param, |
| void *data, uint32_t dt_len) |
| { |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| struct iscsi_iface_param_info *iface_ip = NULL; |
| struct iscsi_iface_param_info *iface_subnet = NULL; |
| struct nlattr *nla; |
| int ret; |
| |
| |
| switch (iface_param->param) { |
| case ISCSI_NET_PARAM_IPV4_BOOTPROTO: |
| nla = nla_find(data, dt_len, ISCSI_NET_PARAM_IPV4_ADDR); |
| if (nla) |
| iface_ip = nla_data(nla); |
| |
| nla = nla_find(data, dt_len, ISCSI_NET_PARAM_IPV4_SUBNET); |
| if (nla) |
| iface_subnet = nla_data(nla); |
| break; |
| case ISCSI_NET_PARAM_IPV4_ADDR: |
| iface_ip = iface_param; |
| nla = nla_find(data, dt_len, ISCSI_NET_PARAM_IPV4_SUBNET); |
| if (nla) |
| iface_subnet = nla_data(nla); |
| break; |
| case ISCSI_NET_PARAM_IPV4_SUBNET: |
| iface_subnet = iface_param; |
| nla = nla_find(data, dt_len, ISCSI_NET_PARAM_IPV4_ADDR); |
| if (nla) |
| iface_ip = nla_data(nla); |
| break; |
| default: |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Unsupported param %d\n", |
| iface_param->param); |
| } |
| |
| if (!iface_ip || !iface_subnet) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : IP and Subnet Mask required\n"); |
| return -EINVAL; |
| } |
| |
| ret = mgmt_set_ip(phba, iface_ip, iface_subnet, |
| ISCSI_BOOTPROTO_STATIC); |
| |
| return ret; |
| } |
| |
| /** |
| * beiscsi_set_vlan_tag()- Set the VLAN TAG |
| * @shost: Scsi Host for the driver instance |
| * @iface_param: Interface paramters |
| * |
| * Set the VLAN TAG for the adapter or disable |
| * the VLAN config |
| * |
| * returns |
| * Success: 0 |
| * Failure: Non-Zero Value |
| **/ |
| static int |
| beiscsi_set_vlan_tag(struct Scsi_Host *shost, |
| struct iscsi_iface_param_info *iface_param) |
| { |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| int ret = 0; |
| |
| /* Get the Interface Handle */ |
| if (mgmt_get_all_if_id(phba)) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Getting Interface Handle Failed\n"); |
| return -EIO; |
| } |
| |
| switch (iface_param->param) { |
| case ISCSI_NET_PARAM_VLAN_ENABLED: |
| if (iface_param->value[0] != ISCSI_VLAN_ENABLE) |
| ret = mgmt_set_vlan(phba, BEISCSI_VLAN_DISABLE); |
| break; |
| case ISCSI_NET_PARAM_VLAN_TAG: |
| ret = mgmt_set_vlan(phba, |
| *((uint16_t *)iface_param->value)); |
| break; |
| default: |
| beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG, |
| "BS_%d : Unknown Param Type : %d\n", |
| iface_param->param); |
| return -ENOSYS; |
| } |
| return ret; |
| } |
| |
| |
| static int |
| beiscsi_set_ipv4(struct Scsi_Host *shost, |
| struct iscsi_iface_param_info *iface_param, |
| void *data, uint32_t dt_len) |
| { |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| int ret = 0; |
| |
| /* Check the param */ |
| switch (iface_param->param) { |
| case ISCSI_NET_PARAM_IPV4_GW: |
| ret = mgmt_set_gateway(phba, iface_param); |
| break; |
| case ISCSI_NET_PARAM_IPV4_BOOTPROTO: |
| if (iface_param->value[0] == ISCSI_BOOTPROTO_DHCP) |
| ret = mgmt_set_ip(phba, iface_param, |
| NULL, ISCSI_BOOTPROTO_DHCP); |
| else if (iface_param->value[0] == ISCSI_BOOTPROTO_STATIC) |
| ret = beiscsi_set_static_ip(shost, iface_param, |
| data, dt_len); |
| else |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Invalid BOOTPROTO: %d\n", |
| iface_param->value[0]); |
| break; |
| case ISCSI_NET_PARAM_IFACE_ENABLE: |
| if (iface_param->value[0] == ISCSI_IFACE_ENABLE) |
| ret = beiscsi_create_ipv4_iface(phba); |
| else |
| iscsi_destroy_iface(phba->ipv4_iface); |
| break; |
| case ISCSI_NET_PARAM_IPV4_SUBNET: |
| case ISCSI_NET_PARAM_IPV4_ADDR: |
| ret = beiscsi_set_static_ip(shost, iface_param, |
| data, dt_len); |
| break; |
| case ISCSI_NET_PARAM_VLAN_ENABLED: |
| case ISCSI_NET_PARAM_VLAN_TAG: |
| ret = beiscsi_set_vlan_tag(shost, iface_param); |
| break; |
| default: |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Param %d not supported\n", |
| iface_param->param); |
| } |
| |
| return ret; |
| } |
| |
| static int |
| beiscsi_set_ipv6(struct Scsi_Host *shost, |
| struct iscsi_iface_param_info *iface_param, |
| void *data, uint32_t dt_len) |
| { |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| int ret = 0; |
| |
| switch (iface_param->param) { |
| case ISCSI_NET_PARAM_IFACE_ENABLE: |
| if (iface_param->value[0] == ISCSI_IFACE_ENABLE) |
| ret = beiscsi_create_ipv6_iface(phba); |
| else { |
| iscsi_destroy_iface(phba->ipv6_iface); |
| ret = 0; |
| } |
| break; |
| case ISCSI_NET_PARAM_IPV6_ADDR: |
| ret = mgmt_set_ip(phba, iface_param, NULL, |
| ISCSI_BOOTPROTO_STATIC); |
| break; |
| default: |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Param %d not supported\n", |
| iface_param->param); |
| } |
| |
| return ret; |
| } |
| |
| int be2iscsi_iface_set_param(struct Scsi_Host *shost, |
| void *data, uint32_t dt_len) |
| { |
| struct iscsi_iface_param_info *iface_param = NULL; |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| struct nlattr *attrib; |
| uint32_t rm_len = dt_len; |
| int ret = 0 ; |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : In PCI_ERROR Recovery\n"); |
| return -EBUSY; |
| } |
| |
| nla_for_each_attr(attrib, data, dt_len, rm_len) { |
| iface_param = nla_data(attrib); |
| |
| if (iface_param->param_type != ISCSI_NET_PARAM) |
| continue; |
| |
| /* |
| * BE2ISCSI only supports 1 interface |
| */ |
| if (iface_param->iface_num) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Invalid iface_num %d." |
| "Only iface_num 0 is supported.\n", |
| iface_param->iface_num); |
| |
| return -EINVAL; |
| } |
| |
| switch (iface_param->iface_type) { |
| case ISCSI_IFACE_TYPE_IPV4: |
| ret = beiscsi_set_ipv4(shost, iface_param, |
| data, dt_len); |
| break; |
| case ISCSI_IFACE_TYPE_IPV6: |
| ret = beiscsi_set_ipv6(shost, iface_param, |
| data, dt_len); |
| break; |
| default: |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Invalid iface type :%d passed\n", |
| iface_param->iface_type); |
| break; |
| } |
| |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int be2iscsi_get_if_param(struct beiscsi_hba *phba, |
| struct iscsi_iface *iface, int param, |
| char *buf) |
| { |
| struct be_cmd_get_if_info_resp *if_info; |
| int len, ip_type = BE2_IPV4; |
| |
| if (iface->iface_type == ISCSI_IFACE_TYPE_IPV6) |
| ip_type = BE2_IPV6; |
| |
| len = mgmt_get_if_info(phba, ip_type, &if_info); |
| if (len) |
| return len; |
| |
| switch (param) { |
| case ISCSI_NET_PARAM_IPV4_ADDR: |
| len = sprintf(buf, "%pI4\n", if_info->ip_addr.addr); |
| break; |
| case ISCSI_NET_PARAM_IPV6_ADDR: |
| len = sprintf(buf, "%pI6\n", if_info->ip_addr.addr); |
| break; |
| case ISCSI_NET_PARAM_IPV4_BOOTPROTO: |
| if (!if_info->dhcp_state) |
| len = sprintf(buf, "static\n"); |
| else |
| len = sprintf(buf, "dhcp\n"); |
| break; |
| case ISCSI_NET_PARAM_IPV4_SUBNET: |
| len = sprintf(buf, "%pI4\n", if_info->ip_addr.subnet_mask); |
| break; |
| case ISCSI_NET_PARAM_VLAN_ENABLED: |
| len = sprintf(buf, "%s\n", |
| (if_info->vlan_priority == BEISCSI_VLAN_DISABLE) |
| ? "Disabled\n" : "Enabled\n"); |
| break; |
| case ISCSI_NET_PARAM_VLAN_ID: |
| if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE) |
| len = -EINVAL; |
| else |
| len = sprintf(buf, "%d\n", |
| (if_info->vlan_priority & |
| ISCSI_MAX_VLAN_ID)); |
| break; |
| case ISCSI_NET_PARAM_VLAN_PRIORITY: |
| if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE) |
| len = -EINVAL; |
| else |
| len = sprintf(buf, "%d\n", |
| ((if_info->vlan_priority >> 13) & |
| ISCSI_MAX_VLAN_PRIORITY)); |
| break; |
| default: |
| WARN_ON(1); |
| } |
| |
| kfree(if_info); |
| return len; |
| } |
| |
| int be2iscsi_iface_get_param(struct iscsi_iface *iface, |
| enum iscsi_param_type param_type, |
| int param, char *buf) |
| { |
| struct Scsi_Host *shost = iscsi_iface_to_shost(iface); |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| struct be_cmd_get_def_gateway_resp gateway; |
| int len = -ENOSYS; |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : In PCI_ERROR Recovery\n"); |
| return -EBUSY; |
| } |
| |
| switch (param) { |
| case ISCSI_NET_PARAM_IPV4_ADDR: |
| case ISCSI_NET_PARAM_IPV4_SUBNET: |
| case ISCSI_NET_PARAM_IPV4_BOOTPROTO: |
| case ISCSI_NET_PARAM_IPV6_ADDR: |
| case ISCSI_NET_PARAM_VLAN_ENABLED: |
| case ISCSI_NET_PARAM_VLAN_ID: |
| case ISCSI_NET_PARAM_VLAN_PRIORITY: |
| len = be2iscsi_get_if_param(phba, iface, param, buf); |
| break; |
| case ISCSI_NET_PARAM_IFACE_ENABLE: |
| len = sprintf(buf, "enabled\n"); |
| break; |
| case ISCSI_NET_PARAM_IPV4_GW: |
| memset(&gateway, 0, sizeof(gateway)); |
| len = mgmt_get_gateway(phba, BE2_IPV4, &gateway); |
| if (!len) |
| len = sprintf(buf, "%pI4\n", &gateway.ip_addr.addr); |
| break; |
| default: |
| len = -ENOSYS; |
| } |
| |
| return len; |
| } |
| |
| /** |
| * beiscsi_ep_get_param - get the iscsi parameter |
| * @ep: pointer to iscsi ep |
| * @param: parameter type identifier |
| * @buf: buffer pointer |
| * |
| * returns iscsi parameter |
| */ |
| int beiscsi_ep_get_param(struct iscsi_endpoint *ep, |
| enum iscsi_param param, char *buf) |
| { |
| struct beiscsi_endpoint *beiscsi_ep = ep->dd_data; |
| int len = 0; |
| |
| beiscsi_log(beiscsi_ep->phba, KERN_INFO, |
| BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_ep_get_param," |
| " param= %d\n", param); |
| |
| switch (param) { |
| case ISCSI_PARAM_CONN_PORT: |
| len = sprintf(buf, "%hu\n", beiscsi_ep->dst_tcpport); |
| break; |
| case ISCSI_PARAM_CONN_ADDRESS: |
| if (beiscsi_ep->ip_type == BE2_IPV4) |
| len = sprintf(buf, "%pI4\n", &beiscsi_ep->dst_addr); |
| else |
| len = sprintf(buf, "%pI6\n", &beiscsi_ep->dst6_addr); |
| break; |
| default: |
| return -ENOSYS; |
| } |
| return len; |
| } |
| |
| int beiscsi_set_param(struct iscsi_cls_conn *cls_conn, |
| enum iscsi_param param, char *buf, int buflen) |
| { |
| struct iscsi_conn *conn = cls_conn->dd_data; |
| struct iscsi_session *session = conn->session; |
| struct beiscsi_hba *phba = NULL; |
| int ret; |
| |
| phba = ((struct beiscsi_conn *)conn->dd_data)->phba; |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_conn_set_param," |
| " param= %d\n", param); |
| |
| ret = iscsi_set_param(cls_conn, param, buf, buflen); |
| if (ret) |
| return ret; |
| /* |
| * If userspace tried to set the value to higher than we can |
| * support override here. |
| */ |
| switch (param) { |
| case ISCSI_PARAM_FIRST_BURST: |
| if (session->first_burst > 8192) |
| session->first_burst = 8192; |
| break; |
| case ISCSI_PARAM_MAX_RECV_DLENGTH: |
| if (conn->max_recv_dlength > 65536) |
| conn->max_recv_dlength = 65536; |
| break; |
| case ISCSI_PARAM_MAX_BURST: |
| if (session->max_burst > 262144) |
| session->max_burst = 262144; |
| break; |
| case ISCSI_PARAM_MAX_XMIT_DLENGTH: |
| if (conn->max_xmit_dlength > 65536) |
| conn->max_xmit_dlength = 65536; |
| default: |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * beiscsi_get_initname - Read Initiator Name from flash |
| * @buf: buffer bointer |
| * @phba: The device priv structure instance |
| * |
| * returns number of bytes |
| */ |
| static int beiscsi_get_initname(char *buf, struct beiscsi_hba *phba) |
| { |
| int rc; |
| unsigned int tag; |
| struct be_mcc_wrb *wrb; |
| struct be_cmd_hba_name *resp; |
| |
| tag = be_cmd_get_initname(phba); |
| if (!tag) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Getting Initiator Name Failed\n"); |
| |
| return -EBUSY; |
| } |
| |
| rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL); |
| if (rc) { |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BS_%d : Initiator Name MBX Failed\n"); |
| return rc; |
| } |
| |
| resp = embedded_payload(wrb); |
| rc = sprintf(buf, "%s\n", resp->initiator_name); |
| return rc; |
| } |
| |
| /** |
| * beiscsi_get_port_state - Get the Port State |
| * @shost : pointer to scsi_host structure |
| * |
| */ |
| static void beiscsi_get_port_state(struct Scsi_Host *shost) |
| { |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| struct iscsi_cls_host *ihost = shost->shost_data; |
| |
| ihost->port_state = (phba->state == BE_ADAPTER_LINK_UP) ? |
| ISCSI_PORT_STATE_UP : ISCSI_PORT_STATE_DOWN; |
| } |
| |
| /** |
| * beiscsi_get_port_speed - Get the Port Speed from Adapter |
| * @shost : pointer to scsi_host structure |
| * |
| * returns Success/Failure |
| */ |
| static int beiscsi_get_port_speed(struct Scsi_Host *shost) |
| { |
| int rc; |
| unsigned int tag; |
| struct be_mcc_wrb *wrb; |
| struct be_cmd_ntwk_link_status_resp *resp; |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| struct iscsi_cls_host *ihost = shost->shost_data; |
| |
| tag = be_cmd_get_port_speed(phba); |
| if (!tag) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Getting Port Speed Failed\n"); |
| |
| return -EBUSY; |
| } |
| rc = beiscsi_mccq_compl(phba, tag, &wrb, NULL); |
| if (rc) { |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BS_%d : Port Speed MBX Failed\n"); |
| return rc; |
| } |
| resp = embedded_payload(wrb); |
| |
| switch (resp->mac_speed) { |
| case BE2ISCSI_LINK_SPEED_10MBPS: |
| ihost->port_speed = ISCSI_PORT_SPEED_10MBPS; |
| break; |
| case BE2ISCSI_LINK_SPEED_100MBPS: |
| ihost->port_speed = ISCSI_PORT_SPEED_100MBPS; |
| break; |
| case BE2ISCSI_LINK_SPEED_1GBPS: |
| ihost->port_speed = ISCSI_PORT_SPEED_1GBPS; |
| break; |
| case BE2ISCSI_LINK_SPEED_10GBPS: |
| ihost->port_speed = ISCSI_PORT_SPEED_10GBPS; |
| break; |
| default: |
| ihost->port_speed = ISCSI_PORT_SPEED_UNKNOWN; |
| } |
| return 0; |
| } |
| |
| /** |
| * beiscsi_get_host_param - get the iscsi parameter |
| * @shost: pointer to scsi_host structure |
| * @param: parameter type identifier |
| * @buf: buffer pointer |
| * |
| * returns host parameter |
| */ |
| int beiscsi_get_host_param(struct Scsi_Host *shost, |
| enum iscsi_host_param param, char *buf) |
| { |
| struct beiscsi_hba *phba = iscsi_host_priv(shost); |
| int status = 0; |
| |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : In PCI_ERROR Recovery\n"); |
| return -EBUSY; |
| } else { |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_get_host_param," |
| " param = %d\n", param); |
| } |
| |
| switch (param) { |
| case ISCSI_HOST_PARAM_HWADDRESS: |
| status = beiscsi_get_macaddr(buf, phba); |
| if (status < 0) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : beiscsi_get_macaddr Failed\n"); |
| return status; |
| } |
| break; |
| case ISCSI_HOST_PARAM_INITIATOR_NAME: |
| status = beiscsi_get_initname(buf, phba); |
| if (status < 0) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Retreiving Initiator Name Failed\n"); |
| return status; |
| } |
| break; |
| case ISCSI_HOST_PARAM_PORT_STATE: |
| beiscsi_get_port_state(shost); |
| status = sprintf(buf, "%s\n", iscsi_get_port_state_name(shost)); |
| break; |
| case ISCSI_HOST_PARAM_PORT_SPEED: |
| status = beiscsi_get_port_speed(shost); |
| if (status) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Retreiving Port Speed Failed\n"); |
| return status; |
| } |
| status = sprintf(buf, "%s\n", iscsi_get_port_speed_name(shost)); |
| break; |
| default: |
| return iscsi_host_get_param(shost, param, buf); |
| } |
| return status; |
| } |
| |
| int beiscsi_get_macaddr(char *buf, struct beiscsi_hba *phba) |
| { |
| struct be_cmd_get_nic_conf_resp resp; |
| int rc; |
| |
| if (phba->mac_addr_set) |
| return sysfs_format_mac(buf, phba->mac_address, ETH_ALEN); |
| |
| memset(&resp, 0, sizeof(resp)); |
| rc = mgmt_get_nic_conf(phba, &resp); |
| if (rc) |
| return rc; |
| |
| phba->mac_addr_set = true; |
| memcpy(phba->mac_address, resp.mac_address, ETH_ALEN); |
| return sysfs_format_mac(buf, phba->mac_address, ETH_ALEN); |
| } |
| |
| /** |
| * beiscsi_conn_get_stats - get the iscsi stats |
| * @cls_conn: pointer to iscsi cls conn |
| * @stats: pointer to iscsi_stats structure |
| * |
| * returns iscsi stats |
| */ |
| void beiscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn, |
| struct iscsi_stats *stats) |
| { |
| struct iscsi_conn *conn = cls_conn->dd_data; |
| struct beiscsi_hba *phba = NULL; |
| |
| phba = ((struct beiscsi_conn *)conn->dd_data)->phba; |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_conn_get_stats\n"); |
| |
| stats->txdata_octets = conn->txdata_octets; |
| stats->rxdata_octets = conn->rxdata_octets; |
| stats->dataout_pdus = conn->dataout_pdus_cnt; |
| stats->scsirsp_pdus = conn->scsirsp_pdus_cnt; |
| stats->scsicmd_pdus = conn->scsicmd_pdus_cnt; |
| stats->datain_pdus = conn->datain_pdus_cnt; |
| stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt; |
| stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt; |
| stats->r2t_pdus = conn->r2t_pdus_cnt; |
| stats->digest_err = 0; |
| stats->timeout_err = 0; |
| stats->custom_length = 0; |
| strcpy(stats->custom[0].desc, "eh_abort_cnt"); |
| stats->custom[0].value = conn->eh_abort_cnt; |
| } |
| |
| /** |
| * beiscsi_set_params_for_offld - get the parameters for offload |
| * @beiscsi_conn: pointer to beiscsi_conn |
| * @params: pointer to offload_params structure |
| */ |
| static void beiscsi_set_params_for_offld(struct beiscsi_conn *beiscsi_conn, |
| struct beiscsi_offload_params *params) |
| { |
| struct iscsi_conn *conn = beiscsi_conn->conn; |
| struct iscsi_session *session = conn->session; |
| |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, max_burst_length, |
| params, session->max_burst); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, |
| max_send_data_segment_length, params, |
| conn->max_xmit_dlength); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, first_burst_length, |
| params, session->first_burst); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, erl, params, |
| session->erl); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, dde, params, |
| conn->datadgst_en); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, hde, params, |
| conn->hdrdgst_en); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, ir2t, params, |
| session->initial_r2t_en); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, imd, params, |
| session->imm_data_en); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, |
| data_seq_inorder, params, |
| session->dataseq_inorder_en); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, |
| pdu_seq_inorder, params, |
| session->pdu_inorder_en); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, max_r2t, params, |
| session->max_r2t); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, exp_statsn, params, |
| (conn->exp_statsn - 1)); |
| AMAP_SET_BITS(struct amap_beiscsi_offload_params, |
| max_recv_data_segment_length, params, |
| conn->max_recv_dlength); |
| |
| } |
| |
| /** |
| * beiscsi_conn_start - offload of session to chip |
| * @cls_conn: pointer to beiscsi_conn |
| */ |
| int beiscsi_conn_start(struct iscsi_cls_conn *cls_conn) |
| { |
| struct iscsi_conn *conn = cls_conn->dd_data; |
| struct beiscsi_conn *beiscsi_conn = conn->dd_data; |
| struct beiscsi_endpoint *beiscsi_ep; |
| struct beiscsi_offload_params params; |
| struct beiscsi_hba *phba; |
| |
| phba = ((struct beiscsi_conn *)conn->dd_data)->phba; |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : In PCI_ERROR Recovery\n"); |
| return -EBUSY; |
| } else { |
| beiscsi_log(beiscsi_conn->phba, KERN_INFO, |
| BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_conn_start\n"); |
| } |
| |
| memset(¶ms, 0, sizeof(struct beiscsi_offload_params)); |
| beiscsi_ep = beiscsi_conn->ep; |
| if (!beiscsi_ep) |
| beiscsi_log(beiscsi_conn->phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_conn_start , no beiscsi_ep\n"); |
| |
| beiscsi_conn->login_in_progress = 0; |
| beiscsi_set_params_for_offld(beiscsi_conn, ¶ms); |
| beiscsi_offload_connection(beiscsi_conn, ¶ms); |
| iscsi_conn_start(cls_conn); |
| return 0; |
| } |
| |
| /** |
| * beiscsi_get_cid - Allocate a cid |
| * @phba: The phba instance |
| */ |
| static int beiscsi_get_cid(struct beiscsi_hba *phba) |
| { |
| unsigned short cid = 0xFFFF, cid_from_ulp; |
| struct ulp_cid_info *cid_info = NULL; |
| uint16_t cid_avlbl_ulp0, cid_avlbl_ulp1; |
| |
| /* Find the ULP which has more CID available */ |
| cid_avlbl_ulp0 = (phba->cid_array_info[BEISCSI_ULP0]) ? |
| BEISCSI_ULP0_AVLBL_CID(phba) : 0; |
| cid_avlbl_ulp1 = (phba->cid_array_info[BEISCSI_ULP1]) ? |
| BEISCSI_ULP1_AVLBL_CID(phba) : 0; |
| cid_from_ulp = (cid_avlbl_ulp0 > cid_avlbl_ulp1) ? |
| BEISCSI_ULP0 : BEISCSI_ULP1; |
| |
| if (test_bit(cid_from_ulp, (void *)&phba->fw_config.ulp_supported)) { |
| cid_info = phba->cid_array_info[cid_from_ulp]; |
| if (!cid_info->avlbl_cids) |
| return cid; |
| |
| cid = cid_info->cid_array[cid_info->cid_alloc++]; |
| |
| if (cid_info->cid_alloc == BEISCSI_GET_CID_COUNT( |
| phba, cid_from_ulp)) |
| cid_info->cid_alloc = 0; |
| |
| cid_info->avlbl_cids--; |
| } |
| return cid; |
| } |
| |
| /** |
| * beiscsi_put_cid - Free the cid |
| * @phba: The phba for which the cid is being freed |
| * @cid: The cid to free |
| */ |
| static void beiscsi_put_cid(struct beiscsi_hba *phba, unsigned short cid) |
| { |
| uint16_t cid_post_ulp; |
| struct hwi_controller *phwi_ctrlr; |
| struct hwi_wrb_context *pwrb_context; |
| struct ulp_cid_info *cid_info = NULL; |
| uint16_t cri_index = BE_GET_CRI_FROM_CID(cid); |
| |
| phwi_ctrlr = phba->phwi_ctrlr; |
| pwrb_context = &phwi_ctrlr->wrb_context[cri_index]; |
| cid_post_ulp = pwrb_context->ulp_num; |
| |
| cid_info = phba->cid_array_info[cid_post_ulp]; |
| cid_info->avlbl_cids++; |
| |
| cid_info->cid_array[cid_info->cid_free++] = cid; |
| if (cid_info->cid_free == BEISCSI_GET_CID_COUNT(phba, cid_post_ulp)) |
| cid_info->cid_free = 0; |
| } |
| |
| /** |
| * beiscsi_free_ep - free endpoint |
| * @ep: pointer to iscsi endpoint structure |
| */ |
| static void beiscsi_free_ep(struct beiscsi_endpoint *beiscsi_ep) |
| { |
| struct beiscsi_hba *phba = beiscsi_ep->phba; |
| struct beiscsi_conn *beiscsi_conn; |
| |
| beiscsi_put_cid(phba, beiscsi_ep->ep_cid); |
| beiscsi_ep->phba = NULL; |
| phba->ep_array[BE_GET_CRI_FROM_CID |
| (beiscsi_ep->ep_cid)] = NULL; |
| |
| /** |
| * Check if any connection resource allocated by driver |
| * is to be freed.This case occurs when target redirection |
| * or connection retry is done. |
| **/ |
| if (!beiscsi_ep->conn) |
| return; |
| |
| beiscsi_conn = beiscsi_ep->conn; |
| if (beiscsi_conn->login_in_progress) { |
| beiscsi_free_mgmt_task_handles(beiscsi_conn, |
| beiscsi_conn->task); |
| beiscsi_conn->login_in_progress = 0; |
| } |
| } |
| |
| /** |
| * beiscsi_open_conn - Ask FW to open a TCP connection |
| * @ep: endpoint to be used |
| * @src_addr: The source IP address |
| * @dst_addr: The Destination IP address |
| * |
| * Asks the FW to open a TCP connection |
| */ |
| static int beiscsi_open_conn(struct iscsi_endpoint *ep, |
| struct sockaddr *src_addr, |
| struct sockaddr *dst_addr, int non_blocking) |
| { |
| struct beiscsi_endpoint *beiscsi_ep = ep->dd_data; |
| struct beiscsi_hba *phba = beiscsi_ep->phba; |
| struct tcp_connect_and_offload_out *ptcpcnct_out; |
| struct be_dma_mem nonemb_cmd; |
| unsigned int tag; |
| int ret = -ENOMEM; |
| |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_open_conn\n"); |
| |
| beiscsi_ep->ep_cid = beiscsi_get_cid(phba); |
| if (beiscsi_ep->ep_cid == 0xFFFF) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : No free cid available\n"); |
| return ret; |
| } |
| |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_open_conn, ep_cid=%d\n", |
| beiscsi_ep->ep_cid); |
| |
| phba->ep_array[BE_GET_CRI_FROM_CID |
| (beiscsi_ep->ep_cid)] = ep; |
| |
| beiscsi_ep->cid_vld = 0; |
| nonemb_cmd.va = pci_alloc_consistent(phba->ctrl.pdev, |
| sizeof(struct tcp_connect_and_offload_in), |
| &nonemb_cmd.dma); |
| if (nonemb_cmd.va == NULL) { |
| |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Failed to allocate memory for" |
| " mgmt_open_connection\n"); |
| |
| beiscsi_free_ep(beiscsi_ep); |
| return -ENOMEM; |
| } |
| nonemb_cmd.size = sizeof(struct tcp_connect_and_offload_in); |
| memset(nonemb_cmd.va, 0, nonemb_cmd.size); |
| tag = mgmt_open_connection(phba, dst_addr, beiscsi_ep, &nonemb_cmd); |
| if (tag <= 0) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : mgmt_open_connection Failed for cid=%d\n", |
| beiscsi_ep->ep_cid); |
| |
| pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, |
| nonemb_cmd.va, nonemb_cmd.dma); |
| beiscsi_free_ep(beiscsi_ep); |
| return -EAGAIN; |
| } |
| |
| ret = beiscsi_mccq_compl(phba, tag, NULL, &nonemb_cmd); |
| if (ret) { |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BS_%d : mgmt_open_connection Failed"); |
| |
| if (ret != -EBUSY) |
| pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, |
| nonemb_cmd.va, nonemb_cmd.dma); |
| |
| beiscsi_free_ep(beiscsi_ep); |
| return ret; |
| } |
| |
| ptcpcnct_out = (struct tcp_connect_and_offload_out *)nonemb_cmd.va; |
| beiscsi_ep = ep->dd_data; |
| beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle; |
| beiscsi_ep->cid_vld = 1; |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : mgmt_open_connection Success\n"); |
| |
| pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size, |
| nonemb_cmd.va, nonemb_cmd.dma); |
| return 0; |
| } |
| |
| /** |
| * beiscsi_ep_connect - Ask chip to create TCP Conn |
| * @scsi_host: Pointer to scsi_host structure |
| * @dst_addr: The IP address of Target |
| * @non_blocking: blocking or non-blocking call |
| * |
| * This routines first asks chip to create a connection and then allocates an EP |
| */ |
| struct iscsi_endpoint * |
| beiscsi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr, |
| int non_blocking) |
| { |
| struct beiscsi_hba *phba; |
| struct beiscsi_endpoint *beiscsi_ep; |
| struct iscsi_endpoint *ep; |
| int ret; |
| |
| if (shost) |
| phba = iscsi_host_priv(shost); |
| else { |
| ret = -ENXIO; |
| printk(KERN_ERR |
| "beiscsi_ep_connect shost is NULL\n"); |
| return ERR_PTR(ret); |
| } |
| |
| if (beiscsi_error(phba)) { |
| ret = -EIO; |
| beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG, |
| "BS_%d : The FW state Not Stable!!!\n"); |
| return ERR_PTR(ret); |
| } |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| ret = -EBUSY; |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : In PCI_ERROR Recovery\n"); |
| return ERR_PTR(ret); |
| } else if (phba->state & BE_ADAPTER_LINK_DOWN) { |
| ret = -EBUSY; |
| beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG, |
| "BS_%d : The Adapter Port state is Down!!!\n"); |
| return ERR_PTR(ret); |
| } |
| |
| ep = iscsi_create_endpoint(sizeof(struct beiscsi_endpoint)); |
| if (!ep) { |
| ret = -ENOMEM; |
| return ERR_PTR(ret); |
| } |
| |
| beiscsi_ep = ep->dd_data; |
| beiscsi_ep->phba = phba; |
| beiscsi_ep->openiscsi_ep = ep; |
| ret = beiscsi_open_conn(ep, NULL, dst_addr, non_blocking); |
| if (ret) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : Failed in beiscsi_open_conn\n"); |
| goto free_ep; |
| } |
| |
| return ep; |
| |
| free_ep: |
| iscsi_destroy_endpoint(ep); |
| return ERR_PTR(ret); |
| } |
| |
| /** |
| * beiscsi_ep_poll - Poll to see if connection is established |
| * @ep: endpoint to be used |
| * @timeout_ms: timeout specified in millisecs |
| * |
| * Poll to see if TCP connection established |
| */ |
| int beiscsi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms) |
| { |
| struct beiscsi_endpoint *beiscsi_ep = ep->dd_data; |
| |
| beiscsi_log(beiscsi_ep->phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_ep_poll\n"); |
| |
| if (beiscsi_ep->cid_vld == 1) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /** |
| * beiscsi_close_conn - Upload the connection |
| * @ep: The iscsi endpoint |
| * @flag: The type of connection closure |
| */ |
| static int beiscsi_close_conn(struct beiscsi_endpoint *beiscsi_ep, int flag) |
| { |
| int ret = 0; |
| unsigned int tag; |
| struct beiscsi_hba *phba = beiscsi_ep->phba; |
| |
| tag = mgmt_upload_connection(phba, beiscsi_ep->ep_cid, flag); |
| if (!tag) { |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : upload failed for cid 0x%x\n", |
| beiscsi_ep->ep_cid); |
| |
| ret = -EAGAIN; |
| } |
| |
| ret = beiscsi_mccq_compl(phba, tag, NULL, NULL); |
| return ret; |
| } |
| |
| /** |
| * beiscsi_unbind_conn_to_cid - Unbind the beiscsi_conn from phba conn table |
| * @phba: The phba instance |
| * @cid: The cid to free |
| */ |
| static int beiscsi_unbind_conn_to_cid(struct beiscsi_hba *phba, |
| unsigned int cid) |
| { |
| uint16_t cri_index = BE_GET_CRI_FROM_CID(cid); |
| |
| if (phba->conn_table[cri_index]) |
| phba->conn_table[cri_index] = NULL; |
| else { |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : Connection table Not occupied.\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /** |
| * beiscsi_ep_disconnect - Tears down the TCP connection |
| * @ep: endpoint to be used |
| * |
| * Tears down the TCP connection |
| */ |
| void beiscsi_ep_disconnect(struct iscsi_endpoint *ep) |
| { |
| struct beiscsi_conn *beiscsi_conn; |
| struct beiscsi_endpoint *beiscsi_ep; |
| struct beiscsi_hba *phba; |
| unsigned int tag; |
| uint8_t mgmt_invalidate_flag, tcp_upload_flag; |
| unsigned short savecfg_flag = CMD_ISCSI_SESSION_SAVE_CFG_ON_FLASH; |
| |
| beiscsi_ep = ep->dd_data; |
| phba = beiscsi_ep->phba; |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_CONFIG, |
| "BS_%d : In beiscsi_ep_disconnect for ep_cid = %d\n", |
| beiscsi_ep->ep_cid); |
| |
| if (beiscsi_ep->conn) { |
| beiscsi_conn = beiscsi_ep->conn; |
| iscsi_suspend_queue(beiscsi_conn->conn); |
| mgmt_invalidate_flag = ~BEISCSI_NO_RST_ISSUE; |
| tcp_upload_flag = CONNECTION_UPLOAD_GRACEFUL; |
| } else { |
| mgmt_invalidate_flag = BEISCSI_NO_RST_ISSUE; |
| tcp_upload_flag = CONNECTION_UPLOAD_ABORT; |
| } |
| |
| if (phba->state & BE_ADAPTER_PCI_ERR) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : PCI_ERROR Recovery\n"); |
| goto free_ep; |
| } |
| |
| tag = mgmt_invalidate_connection(phba, beiscsi_ep, |
| beiscsi_ep->ep_cid, |
| mgmt_invalidate_flag, |
| savecfg_flag); |
| if (!tag) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, |
| "BS_%d : mgmt_invalidate_connection Failed for cid=%d\n", |
| beiscsi_ep->ep_cid); |
| } |
| |
| beiscsi_mccq_compl(phba, tag, NULL, NULL); |
| beiscsi_close_conn(beiscsi_ep, tcp_upload_flag); |
| free_ep: |
| msleep(BEISCSI_LOGOUT_SYNC_DELAY); |
| beiscsi_free_ep(beiscsi_ep); |
| beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid); |
| iscsi_destroy_endpoint(beiscsi_ep->openiscsi_ep); |
| } |
| |
| umode_t be2iscsi_attr_is_visible(int param_type, int param) |
| { |
| switch (param_type) { |
| case ISCSI_NET_PARAM: |
| switch (param) { |
| case ISCSI_NET_PARAM_IFACE_ENABLE: |
| case ISCSI_NET_PARAM_IPV4_ADDR: |
| case ISCSI_NET_PARAM_IPV4_SUBNET: |
| case ISCSI_NET_PARAM_IPV4_BOOTPROTO: |
| case ISCSI_NET_PARAM_IPV4_GW: |
| case ISCSI_NET_PARAM_IPV6_ADDR: |
| case ISCSI_NET_PARAM_VLAN_ID: |
| case ISCSI_NET_PARAM_VLAN_PRIORITY: |
| case ISCSI_NET_PARAM_VLAN_ENABLED: |
| return S_IRUGO; |
| default: |
| return 0; |
| } |
| case ISCSI_HOST_PARAM: |
| switch (param) { |
| case ISCSI_HOST_PARAM_HWADDRESS: |
| case ISCSI_HOST_PARAM_INITIATOR_NAME: |
| case ISCSI_HOST_PARAM_PORT_STATE: |
| case ISCSI_HOST_PARAM_PORT_SPEED: |
| return S_IRUGO; |
| default: |
| return 0; |
| } |
| case ISCSI_PARAM: |
| switch (param) { |
| case ISCSI_PARAM_MAX_RECV_DLENGTH: |
| case ISCSI_PARAM_MAX_XMIT_DLENGTH: |
| case ISCSI_PARAM_HDRDGST_EN: |
| case ISCSI_PARAM_DATADGST_EN: |
| case ISCSI_PARAM_CONN_ADDRESS: |
| case ISCSI_PARAM_CONN_PORT: |
| case ISCSI_PARAM_EXP_STATSN: |
| case ISCSI_PARAM_PERSISTENT_ADDRESS: |
| case ISCSI_PARAM_PERSISTENT_PORT: |
| case ISCSI_PARAM_PING_TMO: |
| case ISCSI_PARAM_RECV_TMO: |
| case ISCSI_PARAM_INITIAL_R2T_EN: |
| case ISCSI_PARAM_MAX_R2T: |
| case ISCSI_PARAM_IMM_DATA_EN: |
| case ISCSI_PARAM_FIRST_BURST: |
| case ISCSI_PARAM_MAX_BURST: |
| case ISCSI_PARAM_PDU_INORDER_EN: |
| case ISCSI_PARAM_DATASEQ_INORDER_EN: |
| case ISCSI_PARAM_ERL: |
| case ISCSI_PARAM_TARGET_NAME: |
| case ISCSI_PARAM_TPGT: |
| case ISCSI_PARAM_USERNAME: |
| case ISCSI_PARAM_PASSWORD: |
| case ISCSI_PARAM_USERNAME_IN: |
| case ISCSI_PARAM_PASSWORD_IN: |
| case ISCSI_PARAM_FAST_ABORT: |
| case ISCSI_PARAM_ABORT_TMO: |
| case ISCSI_PARAM_LU_RESET_TMO: |
| case ISCSI_PARAM_IFACE_NAME: |
| case ISCSI_PARAM_INITIATOR_NAME: |
| return S_IRUGO; |
| default: |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |