| synopsys DWC3 CORE |
| |
| DWC3- USB3 CONTROLLER |
| |
| Required properties: |
| - compatible: must be "snps,dwc3" |
| - reg : Address and length of the register set for the device |
| - interrupts: Interrupts used by the dwc3 controller. |
| |
| Optional properties: |
| - usb-phy : array of phandle for the PHY device. The first element |
| in the array is expected to be a handle to the USB2/HS PHY and |
| the second element is expected to be a handle to the USB3/SS PHY |
| - phys: from the *Generic PHY* bindings |
| - phy-names: from the *Generic PHY* bindings |
| - tx-fifo-resize: determines if the FIFO *has* to be reallocated. |
| |
| This is usually a subnode to DWC3 glue to which it is connected. |
| |
| dwc3@4a030000 { |
| compatible = "snps,dwc3"; |
| reg = <0x4a030000 0xcfff>; |
| interrupts = <0 92 4> |
| usb-phy = <&usb2_phy>, <&usb3,phy>; |
| tx-fifo-resize; |
| }; |
