| /* |
| * File...........: linux/drivers/s390/block/dasd_ioctl.c |
| * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com> |
| * Horst Hummel <Horst.Hummel@de.ibm.com> |
| * Carsten Otte <Cotte@de.ibm.com> |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Bugreports.to..: <Linux390@de.ibm.com> |
| * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001 |
| * |
| * i/o controls for the dasd driver. |
| */ |
| #include <linux/config.h> |
| #include <linux/interrupt.h> |
| #include <linux/major.h> |
| #include <linux/fs.h> |
| #include <linux/blkpg.h> |
| |
| #include <asm/ccwdev.h> |
| #include <asm/uaccess.h> |
| |
| /* This is ugly... */ |
| #define PRINTK_HEADER "dasd_ioctl:" |
| |
| #include "dasd_int.h" |
| |
| /* |
| * SECTION: ioctl functions. |
| */ |
| static struct list_head dasd_ioctl_list = LIST_HEAD_INIT(dasd_ioctl_list); |
| |
| /* |
| * Find the ioctl with number no. |
| */ |
| static struct dasd_ioctl * |
| dasd_find_ioctl(int no) |
| { |
| struct dasd_ioctl *ioctl; |
| |
| list_for_each_entry (ioctl, &dasd_ioctl_list, list) |
| if (ioctl->no == no) |
| return ioctl; |
| return NULL; |
| } |
| |
| /* |
| * Register ioctl with number no. |
| */ |
| int |
| dasd_ioctl_no_register(struct module *owner, int no, dasd_ioctl_fn_t handler) |
| { |
| struct dasd_ioctl *new; |
| if (dasd_find_ioctl(no)) |
| return -EBUSY; |
| new = kmalloc(sizeof (struct dasd_ioctl), GFP_KERNEL); |
| if (new == NULL) |
| return -ENOMEM; |
| new->owner = owner; |
| new->no = no; |
| new->handler = handler; |
| list_add(&new->list, &dasd_ioctl_list); |
| return 0; |
| } |
| |
| /* |
| * Deregister ioctl with number no. |
| */ |
| int |
| dasd_ioctl_no_unregister(struct module *owner, int no, dasd_ioctl_fn_t handler) |
| { |
| struct dasd_ioctl *old = dasd_find_ioctl(no); |
| if (old == NULL) |
| return -ENOENT; |
| if (old->no != no || old->handler != handler || owner != old->owner) |
| return -EINVAL; |
| list_del(&old->list); |
| kfree(old); |
| return 0; |
| } |
| |
| int |
| dasd_ioctl(struct inode *inp, struct file *filp, |
| unsigned int no, unsigned long data) |
| { |
| struct block_device *bdev = inp->i_bdev; |
| struct dasd_device *device = bdev->bd_disk->private_data; |
| struct dasd_ioctl *ioctl; |
| const char *dir; |
| int rc; |
| |
| if ((_IOC_DIR(no) != _IOC_NONE) && (data == 0)) { |
| PRINT_DEBUG("empty data ptr"); |
| return -EINVAL; |
| } |
| dir = _IOC_DIR (no) == _IOC_NONE ? "0" : |
| _IOC_DIR (no) == _IOC_READ ? "r" : |
| _IOC_DIR (no) == _IOC_WRITE ? "w" : |
| _IOC_DIR (no) == (_IOC_READ | _IOC_WRITE) ? "rw" : "u"; |
| DBF_DEV_EVENT(DBF_DEBUG, device, |
| "ioctl 0x%08x %s'0x%x'%d(%d) with data %8lx", no, |
| dir, _IOC_TYPE(no), _IOC_NR(no), _IOC_SIZE(no), data); |
| /* Search for ioctl no in the ioctl list. */ |
| list_for_each_entry(ioctl, &dasd_ioctl_list, list) { |
| if (ioctl->no == no) { |
| /* Found a matching ioctl. Call it. */ |
| if (!try_module_get(ioctl->owner)) |
| continue; |
| rc = ioctl->handler(bdev, no, data); |
| module_put(ioctl->owner); |
| return rc; |
| } |
| } |
| /* No ioctl with number no. */ |
| DBF_DEV_EVENT(DBF_INFO, device, |
| "unknown ioctl 0x%08x=%s'0x%x'%d(%d) data %8lx", no, |
| dir, _IOC_TYPE(no), _IOC_NR(no), _IOC_SIZE(no), data); |
| return -EINVAL; |
| } |
| |
| long |
| dasd_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) |
| { |
| int rval; |
| |
| lock_kernel(); |
| rval = dasd_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); |
| unlock_kernel(); |
| |
| return (rval == -EINVAL) ? -ENOIOCTLCMD : rval; |
| } |
| |
| static int |
| dasd_ioctl_api_version(struct block_device *bdev, int no, long args) |
| { |
| int ver = DASD_API_VERSION; |
| return put_user(ver, (int __user *) args); |
| } |
| |
| /* |
| * Enable device. |
| * used by dasdfmt after BIODASDDISABLE to retrigger blocksize detection |
| */ |
| static int |
| dasd_ioctl_enable(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| dasd_enable_device(device); |
| /* Formatting the dasd device can change the capacity. */ |
| mutex_lock(&bdev->bd_mutex); |
| i_size_write(bdev->bd_inode, (loff_t)get_capacity(device->gdp) << 9); |
| mutex_unlock(&bdev->bd_mutex); |
| return 0; |
| } |
| |
| /* |
| * Disable device. |
| * Used by dasdfmt. Disable I/O operations but allow ioctls. |
| */ |
| static int |
| dasd_ioctl_disable(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| /* |
| * Man this is sick. We don't do a real disable but only downgrade |
| * the device to DASD_STATE_BASIC. The reason is that dasdfmt uses |
| * BIODASDDISABLE to disable accesses to the device via the block |
| * device layer but it still wants to do i/o on the device by |
| * using the BIODASDFMT ioctl. Therefore the correct state for the |
| * device is DASD_STATE_BASIC that allows to do basic i/o. |
| */ |
| dasd_set_target_state(device, DASD_STATE_BASIC); |
| /* |
| * Set i_size to zero, since read, write, etc. check against this |
| * value. |
| */ |
| mutex_lock(&bdev->bd_mutex); |
| i_size_write(bdev->bd_inode, 0); |
| mutex_unlock(&bdev->bd_mutex); |
| return 0; |
| } |
| |
| /* |
| * Quiesce device. |
| */ |
| static int |
| dasd_ioctl_quiesce(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| unsigned long flags; |
| |
| if (!capable (CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| |
| DEV_MESSAGE (KERN_DEBUG, device, "%s", |
| "Quiesce IO on device"); |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| device->stopped |= DASD_STOPPED_QUIESCE; |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); |
| return 0; |
| } |
| |
| |
| /* |
| * Quiesce device. |
| */ |
| static int |
| dasd_ioctl_resume(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| unsigned long flags; |
| |
| if (!capable (CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| |
| DEV_MESSAGE (KERN_DEBUG, device, "%s", |
| "resume IO on device"); |
| |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| device->stopped &= ~DASD_STOPPED_QUIESCE; |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); |
| |
| dasd_schedule_bh (device); |
| return 0; |
| } |
| |
| /* |
| * performs formatting of _device_ according to _fdata_ |
| * Note: The discipline's format_function is assumed to deliver formatting |
| * commands to format a single unit of the device. In terms of the ECKD |
| * devices this means CCWs are generated to format a single track. |
| */ |
| static int |
| dasd_format(struct dasd_device * device, struct format_data_t * fdata) |
| { |
| struct dasd_ccw_req *cqr; |
| int rc; |
| |
| if (device->discipline->format_device == NULL) |
| return -EPERM; |
| |
| if (device->state != DASD_STATE_BASIC) { |
| DEV_MESSAGE(KERN_WARNING, device, "%s", |
| "dasd_format: device is not disabled! "); |
| return -EBUSY; |
| } |
| |
| DBF_DEV_EVENT(DBF_NOTICE, device, |
| "formatting units %d to %d (%d B blocks) flags %d", |
| fdata->start_unit, |
| fdata->stop_unit, fdata->blksize, fdata->intensity); |
| |
| /* Since dasdfmt keeps the device open after it was disabled, |
| * there still exists an inode for this device. |
| * We must update i_blkbits, otherwise we might get errors when |
| * enabling the device later. |
| */ |
| if (fdata->start_unit == 0) { |
| struct block_device *bdev = bdget_disk(device->gdp, 0); |
| bdev->bd_inode->i_blkbits = blksize_bits(fdata->blksize); |
| bdput(bdev); |
| } |
| |
| while (fdata->start_unit <= fdata->stop_unit) { |
| cqr = device->discipline->format_device(device, fdata); |
| if (IS_ERR(cqr)) |
| return PTR_ERR(cqr); |
| rc = dasd_sleep_on_interruptible(cqr); |
| dasd_sfree_request(cqr, cqr->device); |
| if (rc) { |
| if (rc != -ERESTARTSYS) |
| DEV_MESSAGE(KERN_ERR, device, |
| " Formatting of unit %d failed " |
| "with rc = %d", |
| fdata->start_unit, rc); |
| return rc; |
| } |
| fdata->start_unit++; |
| } |
| return 0; |
| } |
| |
| /* |
| * Format device. |
| */ |
| static int |
| dasd_ioctl_format(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| struct format_data_t fdata; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (!args) |
| return -EINVAL; |
| /* fdata == NULL is no longer a valid arg to dasd_format ! */ |
| device = bdev->bd_disk->private_data; |
| |
| if (device == NULL) |
| return -ENODEV; |
| |
| if (device->features & DASD_FEATURE_READONLY) |
| return -EROFS; |
| if (copy_from_user(&fdata, (void __user *) args, |
| sizeof (struct format_data_t))) |
| return -EFAULT; |
| if (bdev != bdev->bd_contains) { |
| DEV_MESSAGE(KERN_WARNING, device, "%s", |
| "Cannot low-level format a partition"); |
| return -EINVAL; |
| } |
| return dasd_format(device, &fdata); |
| } |
| |
| #ifdef CONFIG_DASD_PROFILE |
| /* |
| * Reset device profile information |
| */ |
| static int |
| dasd_ioctl_reset_profile(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| |
| memset(&device->profile, 0, sizeof (struct dasd_profile_info_t)); |
| return 0; |
| } |
| |
| /* |
| * Return device profile information |
| */ |
| static int |
| dasd_ioctl_read_profile(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| |
| if (dasd_profile_level == DASD_PROFILE_OFF) |
| return -EIO; |
| |
| if (copy_to_user((long __user *) args, (long *) &device->profile, |
| sizeof (struct dasd_profile_info_t))) |
| return -EFAULT; |
| return 0; |
| } |
| #else |
| static int |
| dasd_ioctl_reset_profile(struct block_device *bdev, int no, long args) |
| { |
| return -ENOSYS; |
| } |
| |
| static int |
| dasd_ioctl_read_profile(struct block_device *bdev, int no, long args) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| /* |
| * Return dasd information. Used for BIODASDINFO and BIODASDINFO2. |
| */ |
| static int |
| dasd_ioctl_information(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| struct dasd_information2_t *dasd_info; |
| unsigned long flags; |
| int rc; |
| struct ccw_device *cdev; |
| |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| |
| if (!device->discipline->fill_info) |
| return -EINVAL; |
| |
| dasd_info = kmalloc(sizeof(struct dasd_information2_t), GFP_KERNEL); |
| if (dasd_info == NULL) |
| return -ENOMEM; |
| |
| rc = device->discipline->fill_info(device, dasd_info); |
| if (rc) { |
| kfree(dasd_info); |
| return rc; |
| } |
| |
| cdev = device->cdev; |
| |
| dasd_info->devno = _ccw_device_get_device_number(device->cdev); |
| dasd_info->schid = _ccw_device_get_subchannel_number(device->cdev); |
| dasd_info->cu_type = cdev->id.cu_type; |
| dasd_info->cu_model = cdev->id.cu_model; |
| dasd_info->dev_type = cdev->id.dev_type; |
| dasd_info->dev_model = cdev->id.dev_model; |
| dasd_info->status = device->state; |
| /* |
| * The open_count is increased for every opener, that includes |
| * the blkdev_get in dasd_scan_partitions. |
| * This must be hidden from user-space. |
| */ |
| dasd_info->open_count = atomic_read(&device->open_count); |
| if (!device->bdev) |
| dasd_info->open_count++; |
| |
| /* |
| * check if device is really formatted |
| * LDL / CDL was returned by 'fill_info' |
| */ |
| if ((device->state < DASD_STATE_READY) || |
| (dasd_check_blocksize(device->bp_block))) |
| dasd_info->format = DASD_FORMAT_NONE; |
| |
| dasd_info->features |= |
| ((device->features & DASD_FEATURE_READONLY) != 0); |
| |
| if (device->discipline) |
| memcpy(dasd_info->type, device->discipline->name, 4); |
| else |
| memcpy(dasd_info->type, "none", 4); |
| dasd_info->req_queue_len = 0; |
| dasd_info->chanq_len = 0; |
| if (device->request_queue->request_fn) { |
| struct list_head *l; |
| #ifdef DASD_EXTENDED_PROFILING |
| { |
| struct list_head *l; |
| spin_lock_irqsave(&device->lock, flags); |
| list_for_each(l, &device->request_queue->queue_head) |
| dasd_info->req_queue_len++; |
| spin_unlock_irqrestore(&device->lock, flags); |
| } |
| #endif /* DASD_EXTENDED_PROFILING */ |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| list_for_each(l, &device->ccw_queue) |
| dasd_info->chanq_len++; |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), |
| flags); |
| } |
| |
| rc = 0; |
| if (copy_to_user((long __user *) args, (long *) dasd_info, |
| ((no == (unsigned int) BIODASDINFO2) ? |
| sizeof (struct dasd_information2_t) : |
| sizeof (struct dasd_information_t)))) |
| rc = -EFAULT; |
| kfree(dasd_info); |
| return rc; |
| } |
| |
| /* |
| * Set read only |
| */ |
| static int |
| dasd_ioctl_set_ro(struct block_device *bdev, int no, long args) |
| { |
| struct dasd_device *device; |
| int intval, rc; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (bdev != bdev->bd_contains) |
| // ro setting is not allowed for partitions |
| return -EINVAL; |
| if (get_user(intval, (int __user *) args)) |
| return -EFAULT; |
| device = bdev->bd_disk->private_data; |
| if (device == NULL) |
| return -ENODEV; |
| |
| set_disk_ro(bdev->bd_disk, intval); |
| rc = dasd_set_feature(device->cdev, DASD_FEATURE_READONLY, intval); |
| |
| return rc; |
| } |
| |
| /* |
| * List of static ioctls. |
| */ |
| static struct { int no; dasd_ioctl_fn_t fn; } dasd_ioctls[] = |
| { |
| { BIODASDDISABLE, dasd_ioctl_disable }, |
| { BIODASDENABLE, dasd_ioctl_enable }, |
| { BIODASDQUIESCE, dasd_ioctl_quiesce }, |
| { BIODASDRESUME, dasd_ioctl_resume }, |
| { BIODASDFMT, dasd_ioctl_format }, |
| { BIODASDINFO, dasd_ioctl_information }, |
| { BIODASDINFO2, dasd_ioctl_information }, |
| { BIODASDPRRD, dasd_ioctl_read_profile }, |
| { BIODASDPRRST, dasd_ioctl_reset_profile }, |
| { BLKROSET, dasd_ioctl_set_ro }, |
| { DASDAPIVER, dasd_ioctl_api_version }, |
| { -1, NULL } |
| }; |
| |
| int |
| dasd_ioctl_init(void) |
| { |
| int i; |
| |
| for (i = 0; dasd_ioctls[i].no != -1; i++) |
| dasd_ioctl_no_register(NULL, dasd_ioctls[i].no, |
| dasd_ioctls[i].fn); |
| return 0; |
| |
| } |
| |
| void |
| dasd_ioctl_exit(void) |
| { |
| int i; |
| |
| for (i = 0; dasd_ioctls[i].no != -1; i++) |
| dasd_ioctl_no_unregister(NULL, dasd_ioctls[i].no, |
| dasd_ioctls[i].fn); |
| |
| } |
| |
| EXPORT_SYMBOL(dasd_ioctl_no_register); |
| EXPORT_SYMBOL(dasd_ioctl_no_unregister); |