| /* |
| * This file contains low level CPU setup functions. |
| * Kumar Gala <galak@kernel.crashing.org> |
| * Copyright 2009 Freescale Semiconductor, Inc. |
| * |
| * Based on cpu_setup_6xx code by |
| * Benjamin Herrenschmidt <benh@kernel.crashing.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <asm/processor.h> |
| #include <asm/cputable.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/mmu-book3e.h> |
| #include <asm/asm-offsets.h> |
| |
| _GLOBAL(__e500_icache_setup) |
| mfspr r0, SPRN_L1CSR1 |
| andi. r3, r0, L1CSR1_ICE |
| bnelr /* Already enabled */ |
| oris r0, r0, L1CSR1_CPE@h |
| ori r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR | L1CSR1_ICE) |
| mtspr SPRN_L1CSR1, r0 /* Enable I-Cache */ |
| isync |
| blr |
| |
| _GLOBAL(__e500_dcache_setup) |
| mfspr r0, SPRN_L1CSR0 |
| andi. r3, r0, L1CSR0_DCE |
| bnelr /* Already enabled */ |
| msync |
| isync |
| li r0, 0 |
| mtspr SPRN_L1CSR0, r0 /* Disable */ |
| msync |
| isync |
| li r0, (L1CSR0_DCFI | L1CSR0_CLFC) |
| mtspr SPRN_L1CSR0, r0 /* Invalidate */ |
| isync |
| 1: mfspr r0, SPRN_L1CSR0 |
| andi. r3, r0, L1CSR0_CLFC |
| bne+ 1b /* Wait for lock bits reset */ |
| oris r0, r0, L1CSR0_CPE@h |
| ori r0, r0, L1CSR0_DCE |
| msync |
| isync |
| mtspr SPRN_L1CSR0, r0 /* Enable */ |
| isync |
| blr |
| |
| /* |
| * FIXME - we haven't yet done testing to determine a reasonable default |
| * value for PW20_WAIT_IDLE_BIT. |
| */ |
| #define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ |
| _GLOBAL(setup_pw20_idle) |
| mfspr r3, SPRN_PWRMGTCR0 |
| |
| /* Set PW20_WAIT bit, enable pw20 state*/ |
| ori r3, r3, PWRMGTCR0_PW20_WAIT |
| li r11, PW20_WAIT_IDLE_BIT |
| |
| /* Set Automatic PW20 Core Idle Count */ |
| rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT |
| |
| mtspr SPRN_PWRMGTCR0, r3 |
| |
| blr |
| |
| /* |
| * FIXME - we haven't yet done testing to determine a reasonable default |
| * value for AV_WAIT_IDLE_BIT. |
| */ |
| #define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ |
| _GLOBAL(setup_altivec_idle) |
| mfspr r3, SPRN_PWRMGTCR0 |
| |
| /* Enable Altivec Idle */ |
| oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h |
| li r11, AV_WAIT_IDLE_BIT |
| |
| /* Set Automatic AltiVec Idle Count */ |
| rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT |
| |
| mtspr SPRN_PWRMGTCR0, r3 |
| |
| blr |
| |
| _GLOBAL(__setup_cpu_e6500) |
| mflr r6 |
| #ifdef CONFIG_PPC64 |
| bl setup_altivec_ivors |
| /* Touch IVOR42 only if the CPU supports E.HV category */ |
| mfspr r10,SPRN_MMUCFG |
| rlwinm. r10,r10,0,MMUCFG_LPIDSIZE |
| beq 1f |
| bl setup_lrat_ivor |
| 1: |
| #endif |
| bl setup_pw20_idle |
| bl setup_altivec_idle |
| bl __setup_cpu_e5500 |
| mtlr r6 |
| blr |
| |
| #ifdef CONFIG_PPC32 |
| _GLOBAL(__setup_cpu_e200) |
| /* enable dedicated debug exception handling resources (Debug APU) */ |
| mfspr r3,SPRN_HID0 |
| ori r3,r3,HID0_DAPUEN@l |
| mtspr SPRN_HID0,r3 |
| b __setup_e200_ivors |
| _GLOBAL(__setup_cpu_e500v1) |
| _GLOBAL(__setup_cpu_e500v2) |
| mflr r4 |
| bl __e500_icache_setup |
| bl __e500_dcache_setup |
| bl __setup_e500_ivors |
| #if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI) |
| /* Ensure that RFXE is set */ |
| mfspr r3,SPRN_HID1 |
| oris r3,r3,HID1_RFXE@h |
| mtspr SPRN_HID1,r3 |
| #endif |
| mtlr r4 |
| blr |
| _GLOBAL(__setup_cpu_e500mc) |
| _GLOBAL(__setup_cpu_e5500) |
| mflr r5 |
| bl __e500_icache_setup |
| bl __e500_dcache_setup |
| bl __setup_e500mc_ivors |
| /* |
| * We only want to touch IVOR38-41 if we're running on hardware |
| * that supports category E.HV. The architectural way to determine |
| * this is MMUCFG[LPIDSIZE]. |
| */ |
| mfspr r3, SPRN_MMUCFG |
| rlwinm. r3, r3, 0, MMUCFG_LPIDSIZE |
| beq 1f |
| bl __setup_ehv_ivors |
| b 2f |
| 1: |
| lwz r3, CPU_SPEC_FEATURES(r4) |
| /* We need this check as cpu_setup is also called for |
| * the secondary cores. So, if we have already cleared |
| * the feature on the primary core, avoid doing it on the |
| * secondary core. |
| */ |
| andis. r6, r3, CPU_FTR_EMB_HV@h |
| beq 2f |
| rlwinm r3, r3, 0, ~CPU_FTR_EMB_HV |
| stw r3, CPU_SPEC_FEATURES(r4) |
| 2: |
| mtlr r5 |
| blr |
| #endif |
| |
| #ifdef CONFIG_PPC_BOOK3E_64 |
| _GLOBAL(__restore_cpu_e6500) |
| mflr r5 |
| bl setup_altivec_ivors |
| /* Touch IVOR42 only if the CPU supports E.HV category */ |
| mfspr r10,SPRN_MMUCFG |
| rlwinm. r10,r10,0,MMUCFG_LPIDSIZE |
| beq 1f |
| bl setup_lrat_ivor |
| 1: |
| bl setup_pw20_idle |
| bl setup_altivec_idle |
| bl __restore_cpu_e5500 |
| mtlr r5 |
| blr |
| |
| _GLOBAL(__restore_cpu_e5500) |
| mflr r4 |
| bl __e500_icache_setup |
| bl __e500_dcache_setup |
| bl __setup_base_ivors |
| bl setup_perfmon_ivor |
| bl setup_doorbell_ivors |
| /* |
| * We only want to touch IVOR38-41 if we're running on hardware |
| * that supports category E.HV. The architectural way to determine |
| * this is MMUCFG[LPIDSIZE]. |
| */ |
| mfspr r10,SPRN_MMUCFG |
| rlwinm. r10,r10,0,MMUCFG_LPIDSIZE |
| beq 1f |
| bl setup_ehv_ivors |
| 1: |
| mtlr r4 |
| blr |
| |
| _GLOBAL(__setup_cpu_e5500) |
| mflr r5 |
| bl __e500_icache_setup |
| bl __e500_dcache_setup |
| bl __setup_base_ivors |
| bl setup_perfmon_ivor |
| bl setup_doorbell_ivors |
| /* |
| * We only want to touch IVOR38-41 if we're running on hardware |
| * that supports category E.HV. The architectural way to determine |
| * this is MMUCFG[LPIDSIZE]. |
| */ |
| mfspr r10,SPRN_MMUCFG |
| rlwinm. r10,r10,0,MMUCFG_LPIDSIZE |
| beq 1f |
| bl setup_ehv_ivors |
| b 2f |
| 1: |
| ld r10,CPU_SPEC_FEATURES(r4) |
| LOAD_REG_IMMEDIATE(r9,CPU_FTR_EMB_HV) |
| andc r10,r10,r9 |
| std r10,CPU_SPEC_FEATURES(r4) |
| 2: |
| mtlr r5 |
| blr |
| #endif |
