| // TODO some minor issues |
| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2001 - 2007 Tensilica Inc. |
| * |
| * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> |
| * Chris Zankel <chris@zankel.net> |
| * Scott Foehner<sfoehner@yahoo.com>, |
| * Kevin Chea |
| * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/smp.h> |
| #include <linux/security.h> |
| #include <linux/signal.h> |
| |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/system.h> |
| #include <asm/uaccess.h> |
| #include <asm/ptrace.h> |
| #include <asm/elf.h> |
| #include <asm/coprocessor.h> |
| |
| |
| void user_enable_single_step(struct task_struct *child) |
| { |
| child->ptrace |= PT_SINGLESTEP; |
| } |
| |
| void user_disable_single_step(struct task_struct *child) |
| { |
| child->ptrace &= ~PT_SINGLESTEP; |
| } |
| |
| /* |
| * Called by kernel/ptrace.c when detaching to disable single stepping. |
| */ |
| |
| void ptrace_disable(struct task_struct *child) |
| { |
| /* Nothing to do.. */ |
| } |
| |
| int ptrace_getregs(struct task_struct *child, void __user *uregs) |
| { |
| struct pt_regs *regs = task_pt_regs(child); |
| xtensa_gregset_t __user *gregset = uregs; |
| unsigned long wm = regs->wmask; |
| unsigned long wb = regs->windowbase; |
| int live, i; |
| |
| if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t))) |
| return -EIO; |
| |
| __put_user(regs->pc, &gregset->pc); |
| __put_user(regs->ps & ~(1 << PS_EXCM_BIT), &gregset->ps); |
| __put_user(regs->lbeg, &gregset->lbeg); |
| __put_user(regs->lend, &gregset->lend); |
| __put_user(regs->lcount, &gregset->lcount); |
| __put_user(regs->windowstart, &gregset->windowstart); |
| __put_user(regs->windowbase, &gregset->windowbase); |
| |
| live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16; |
| |
| for (i = 0; i < live; i++) |
| __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS)); |
| for (i = XCHAL_NUM_AREGS - (wm >> 4) * 4; i < XCHAL_NUM_AREGS; i++) |
| __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS)); |
| |
| return 0; |
| } |
| |
| int ptrace_setregs(struct task_struct *child, void __user *uregs) |
| { |
| struct pt_regs *regs = task_pt_regs(child); |
| xtensa_gregset_t *gregset = uregs; |
| const unsigned long ps_mask = PS_CALLINC_MASK | PS_OWB_MASK; |
| unsigned long ps; |
| unsigned long wb; |
| |
| if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t))) |
| return -EIO; |
| |
| __get_user(regs->pc, &gregset->pc); |
| __get_user(ps, &gregset->ps); |
| __get_user(regs->lbeg, &gregset->lbeg); |
| __get_user(regs->lend, &gregset->lend); |
| __get_user(regs->lcount, &gregset->lcount); |
| __get_user(regs->windowstart, &gregset->windowstart); |
| __get_user(wb, &gregset->windowbase); |
| |
| regs->ps = (regs->ps & ~ps_mask) | (ps & ps_mask) | (1 << PS_EXCM_BIT); |
| |
| if (wb >= XCHAL_NUM_AREGS / 4) |
| return -EFAULT; |
| |
| regs->windowbase = wb; |
| |
| if (wb != 0 && __copy_from_user(regs->areg + XCHAL_NUM_AREGS - wb * 4, |
| gregset->a, wb * 16)) |
| return -EFAULT; |
| |
| if (__copy_from_user(regs->areg, gregset->a + wb*4, (WSBITS-wb) * 16)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| |
| int ptrace_getxregs(struct task_struct *child, void __user *uregs) |
| { |
| struct pt_regs *regs = task_pt_regs(child); |
| struct thread_info *ti = task_thread_info(child); |
| elf_xtregs_t __user *xtregs = uregs; |
| int ret = 0; |
| |
| if (!access_ok(VERIFY_WRITE, uregs, sizeof(elf_xtregs_t))) |
| return -EIO; |
| |
| #if XTENSA_HAVE_COPROCESSORS |
| /* Flush all coprocessor registers to memory. */ |
| coprocessor_flush_all(ti); |
| ret |= __copy_to_user(&xtregs->cp0, &ti->xtregs_cp, |
| sizeof(xtregs_coprocessor_t)); |
| #endif |
| ret |= __copy_to_user(&xtregs->opt, ®s->xtregs_opt, |
| sizeof(xtregs->opt)); |
| ret |= __copy_to_user(&xtregs->user,&ti->xtregs_user, |
| sizeof(xtregs->user)); |
| |
| return ret ? -EFAULT : 0; |
| } |
| |
| int ptrace_setxregs(struct task_struct *child, void __user *uregs) |
| { |
| struct thread_info *ti = task_thread_info(child); |
| struct pt_regs *regs = task_pt_regs(child); |
| elf_xtregs_t *xtregs = uregs; |
| int ret = 0; |
| |
| #if XTENSA_HAVE_COPROCESSORS |
| /* Flush all coprocessors before we overwrite them. */ |
| coprocessor_flush_all(ti); |
| coprocessor_release_all(ti); |
| |
| ret |= __copy_from_user(&ti->xtregs_cp, &xtregs->cp0, |
| sizeof(xtregs_coprocessor_t)); |
| #endif |
| ret |= __copy_from_user(®s->xtregs_opt, &xtregs->opt, |
| sizeof(xtregs->opt)); |
| ret |= __copy_from_user(&ti->xtregs_user, &xtregs->user, |
| sizeof(xtregs->user)); |
| |
| return ret ? -EFAULT : 0; |
| } |
| |
| int ptrace_peekusr(struct task_struct *child, long regno, long __user *ret) |
| { |
| struct pt_regs *regs; |
| unsigned long tmp; |
| |
| regs = task_pt_regs(child); |
| tmp = 0; /* Default return value. */ |
| |
| switch(regno) { |
| |
| case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1: |
| tmp = regs->areg[regno - REG_AR_BASE]; |
| break; |
| |
| case REG_A_BASE ... REG_A_BASE + 15: |
| tmp = regs->areg[regno - REG_A_BASE]; |
| break; |
| |
| case REG_PC: |
| tmp = regs->pc; |
| break; |
| |
| case REG_PS: |
| /* Note: PS.EXCM is not set while user task is running; |
| * its being set in regs is for exception handling |
| * convenience. */ |
| tmp = (regs->ps & ~(1 << PS_EXCM_BIT)); |
| break; |
| |
| case REG_WB: |
| break; /* tmp = 0 */ |
| |
| case REG_WS: |
| { |
| unsigned long wb = regs->windowbase; |
| unsigned long ws = regs->windowstart; |
| tmp = ((ws>>wb) | (ws<<(WSBITS-wb))) & ((1<<WSBITS)-1); |
| break; |
| } |
| case REG_LBEG: |
| tmp = regs->lbeg; |
| break; |
| |
| case REG_LEND: |
| tmp = regs->lend; |
| break; |
| |
| case REG_LCOUNT: |
| tmp = regs->lcount; |
| break; |
| |
| case REG_SAR: |
| tmp = regs->sar; |
| break; |
| |
| case SYSCALL_NR: |
| tmp = regs->syscall; |
| break; |
| |
| default: |
| return -EIO; |
| } |
| return put_user(tmp, ret); |
| } |
| |
| int ptrace_pokeusr(struct task_struct *child, long regno, long val) |
| { |
| struct pt_regs *regs; |
| regs = task_pt_regs(child); |
| |
| switch (regno) { |
| case REG_AR_BASE ... REG_AR_BASE + XCHAL_NUM_AREGS - 1: |
| regs->areg[regno - REG_AR_BASE] = val; |
| break; |
| |
| case REG_A_BASE ... REG_A_BASE + 15: |
| regs->areg[regno - REG_A_BASE] = val; |
| break; |
| |
| case REG_PC: |
| regs->pc = val; |
| break; |
| |
| case SYSCALL_NR: |
| regs->syscall = val; |
| break; |
| |
| default: |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| long arch_ptrace(struct task_struct *child, long request, long addr, long data) |
| { |
| int ret = -EPERM; |
| |
| switch (request) { |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ |
| case PTRACE_PEEKDATA: |
| ret = generic_ptrace_peekdata(child, addr, data); |
| break; |
| |
| case PTRACE_PEEKUSR: /* read register specified by addr. */ |
| ret = ptrace_peekusr(child, addr, (void __user *) data); |
| break; |
| |
| case PTRACE_POKETEXT: /* write the word at location addr. */ |
| case PTRACE_POKEDATA: |
| ret = generic_ptrace_pokedata(child, addr, data); |
| break; |
| |
| case PTRACE_POKEUSR: /* write register specified by addr. */ |
| ret = ptrace_pokeusr(child, addr, data); |
| break; |
| |
| case PTRACE_GETREGS: |
| ret = ptrace_getregs(child, (void __user *) data); |
| break; |
| |
| case PTRACE_SETREGS: |
| ret = ptrace_setregs(child, (void __user *) data); |
| break; |
| |
| case PTRACE_GETXTREGS: |
| ret = ptrace_getxregs(child, (void __user *) data); |
| break; |
| |
| case PTRACE_SETXTREGS: |
| ret = ptrace_setxregs(child, (void __user *) data); |
| break; |
| |
| default: |
| ret = ptrace_request(child, request, addr, data); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| void do_syscall_trace(void) |
| { |
| /* |
| * The 0x80 provides a way for the tracing parent to distinguish |
| * between a syscall stop and SIGTRAP delivery |
| */ |
| ptrace_notify(SIGTRAP|((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); |
| |
| /* |
| * this isn't the same as continuing with a signal, but it will do |
| * for normal use. strace only continues with a signal if the |
| * stopping signal is not SIGTRAP. -brl |
| */ |
| if (current->exit_code) { |
| send_sig(current->exit_code, current, 1); |
| current->exit_code = 0; |
| } |
| } |
| |
| void do_syscall_trace_enter(struct pt_regs *regs) |
| { |
| if (test_thread_flag(TIF_SYSCALL_TRACE) |
| && (current->ptrace & PT_PTRACED)) |
| do_syscall_trace(); |
| |
| #if 0 |
| if (unlikely(current->audit_context)) |
| audit_syscall_entry(current, AUDIT_ARCH_XTENSA..); |
| #endif |
| } |
| |
| void do_syscall_trace_leave(struct pt_regs *regs) |
| { |
| if ((test_thread_flag(TIF_SYSCALL_TRACE)) |
| && (current->ptrace & PT_PTRACED)) |
| do_syscall_trace(); |
| } |
| |