| /* | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2005-2006, Devicescape Software, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2007	Johannes Berg <johannes@sipsolutions.net> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * | 
 |  * Transmit and frame generation functions. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/bitmap.h> | 
 | #include <linux/rcupdate.h> | 
 | #include <linux/export.h> | 
 | #include <net/net_namespace.h> | 
 | #include <net/ieee80211_radiotap.h> | 
 | #include <net/cfg80211.h> | 
 | #include <net/mac80211.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "led.h" | 
 | #include "mesh.h" | 
 | #include "wep.h" | 
 | #include "wpa.h" | 
 | #include "wme.h" | 
 | #include "rate.h" | 
 |  | 
 | /* misc utils */ | 
 |  | 
 | static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, | 
 | 				 struct sk_buff *skb, int group_addr, | 
 | 				 int next_frag_len) | 
 | { | 
 | 	int rate, mrate, erp, dur, i; | 
 | 	struct ieee80211_rate *txrate; | 
 | 	struct ieee80211_local *local = tx->local; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	/* assume HW handles this */ | 
 | 	if (tx->rate.flags & IEEE80211_TX_RC_MCS) | 
 | 		return 0; | 
 |  | 
 | 	/* uh huh? */ | 
 | 	if (WARN_ON_ONCE(tx->rate.idx < 0)) | 
 | 		return 0; | 
 |  | 
 | 	sband = local->hw.wiphy->bands[info->band]; | 
 | 	txrate = &sband->bitrates[tx->rate.idx]; | 
 |  | 
 | 	erp = txrate->flags & IEEE80211_RATE_ERP_G; | 
 |  | 
 | 	/* | 
 | 	 * data and mgmt (except PS Poll): | 
 | 	 * - during CFP: 32768 | 
 | 	 * - during contention period: | 
 | 	 *   if addr1 is group address: 0 | 
 | 	 *   if more fragments = 0 and addr1 is individual address: time to | 
 | 	 *      transmit one ACK plus SIFS | 
 | 	 *   if more fragments = 1 and addr1 is individual address: time to | 
 | 	 *      transmit next fragment plus 2 x ACK plus 3 x SIFS | 
 | 	 * | 
 | 	 * IEEE 802.11, 9.6: | 
 | 	 * - control response frame (CTS or ACK) shall be transmitted using the | 
 | 	 *   same rate as the immediately previous frame in the frame exchange | 
 | 	 *   sequence, if this rate belongs to the PHY mandatory rates, or else | 
 | 	 *   at the highest possible rate belonging to the PHY rates in the | 
 | 	 *   BSSBasicRateSet | 
 | 	 */ | 
 | 	hdr = (struct ieee80211_hdr *)skb->data; | 
 | 	if (ieee80211_is_ctl(hdr->frame_control)) { | 
 | 		/* TODO: These control frames are not currently sent by | 
 | 		 * mac80211, but should they be implemented, this function | 
 | 		 * needs to be updated to support duration field calculation. | 
 | 		 * | 
 | 		 * RTS: time needed to transmit pending data/mgmt frame plus | 
 | 		 *    one CTS frame plus one ACK frame plus 3 x SIFS | 
 | 		 * CTS: duration of immediately previous RTS minus time | 
 | 		 *    required to transmit CTS and its SIFS | 
 | 		 * ACK: 0 if immediately previous directed data/mgmt had | 
 | 		 *    more=0, with more=1 duration in ACK frame is duration | 
 | 		 *    from previous frame minus time needed to transmit ACK | 
 | 		 *    and its SIFS | 
 | 		 * PS Poll: BIT(15) | BIT(14) | aid | 
 | 		 */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* data/mgmt */ | 
 | 	if (0 /* FIX: data/mgmt during CFP */) | 
 | 		return cpu_to_le16(32768); | 
 |  | 
 | 	if (group_addr) /* Group address as the destination - no ACK */ | 
 | 		return 0; | 
 |  | 
 | 	/* Individual destination address: | 
 | 	 * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) | 
 | 	 * CTS and ACK frames shall be transmitted using the highest rate in | 
 | 	 * basic rate set that is less than or equal to the rate of the | 
 | 	 * immediately previous frame and that is using the same modulation | 
 | 	 * (CCK or OFDM). If no basic rate set matches with these requirements, | 
 | 	 * the highest mandatory rate of the PHY that is less than or equal to | 
 | 	 * the rate of the previous frame is used. | 
 | 	 * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps | 
 | 	 */ | 
 | 	rate = -1; | 
 | 	/* use lowest available if everything fails */ | 
 | 	mrate = sband->bitrates[0].bitrate; | 
 | 	for (i = 0; i < sband->n_bitrates; i++) { | 
 | 		struct ieee80211_rate *r = &sband->bitrates[i]; | 
 |  | 
 | 		if (r->bitrate > txrate->bitrate) | 
 | 			break; | 
 |  | 
 | 		if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) | 
 | 			rate = r->bitrate; | 
 |  | 
 | 		switch (sband->band) { | 
 | 		case IEEE80211_BAND_2GHZ: { | 
 | 			u32 flag; | 
 | 			if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) | 
 | 				flag = IEEE80211_RATE_MANDATORY_G; | 
 | 			else | 
 | 				flag = IEEE80211_RATE_MANDATORY_B; | 
 | 			if (r->flags & flag) | 
 | 				mrate = r->bitrate; | 
 | 			break; | 
 | 		} | 
 | 		case IEEE80211_BAND_5GHZ: | 
 | 			if (r->flags & IEEE80211_RATE_MANDATORY_A) | 
 | 				mrate = r->bitrate; | 
 | 			break; | 
 | 		case IEEE80211_BAND_60GHZ: | 
 | 			/* TODO, for now fall through */ | 
 | 		case IEEE80211_NUM_BANDS: | 
 | 			WARN_ON(1); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (rate == -1) { | 
 | 		/* No matching basic rate found; use highest suitable mandatory | 
 | 		 * PHY rate */ | 
 | 		rate = mrate; | 
 | 	} | 
 |  | 
 | 	/* Don't calculate ACKs for QoS Frames with NoAck Policy set */ | 
 | 	if (ieee80211_is_data_qos(hdr->frame_control) && | 
 | 	    *(ieee80211_get_qos_ctl(hdr)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) | 
 | 		dur = 0; | 
 | 	else | 
 | 		/* Time needed to transmit ACK | 
 | 		 * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up | 
 | 		 * to closest integer */ | 
 | 		dur = ieee80211_frame_duration(sband->band, 10, rate, erp, | 
 | 				tx->sdata->vif.bss_conf.use_short_preamble); | 
 |  | 
 | 	if (next_frag_len) { | 
 | 		/* Frame is fragmented: duration increases with time needed to | 
 | 		 * transmit next fragment plus ACK and 2 x SIFS. */ | 
 | 		dur *= 2; /* ACK + SIFS */ | 
 | 		/* next fragment */ | 
 | 		dur += ieee80211_frame_duration(sband->band, next_frag_len, | 
 | 				txrate->bitrate, erp, | 
 | 				tx->sdata->vif.bss_conf.use_short_preamble); | 
 | 	} | 
 |  | 
 | 	return cpu_to_le16(dur); | 
 | } | 
 |  | 
 | /* tx handlers */ | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_local *local = tx->local; | 
 | 	struct ieee80211_if_managed *ifmgd; | 
 |  | 
 | 	/* driver doesn't support power save */ | 
 | 	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* hardware does dynamic power save */ | 
 | 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* dynamic power save disabled */ | 
 | 	if (local->hw.conf.dynamic_ps_timeout <= 0) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* we are scanning, don't enable power save */ | 
 | 	if (local->scanning) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (!local->ps_sdata) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* No point if we're going to suspend */ | 
 | 	if (local->quiescing) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* dynamic ps is supported only in managed mode */ | 
 | 	if (tx->sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	ifmgd = &tx->sdata->u.mgd; | 
 |  | 
 | 	/* | 
 | 	 * Don't wakeup from power save if u-apsd is enabled, voip ac has | 
 | 	 * u-apsd enabled and the frame is in voip class. This effectively | 
 | 	 * means that even if all access categories have u-apsd enabled, in | 
 | 	 * practise u-apsd is only used with the voip ac. This is a | 
 | 	 * workaround for the case when received voip class packets do not | 
 | 	 * have correct qos tag for some reason, due the network or the | 
 | 	 * peer application. | 
 | 	 * | 
 | 	 * Note: ifmgd->uapsd_queues access is racy here. If the value is | 
 | 	 * changed via debugfs, user needs to reassociate manually to have | 
 | 	 * everything in sync. | 
 | 	 */ | 
 | 	if ((ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) && | 
 | 	    (ifmgd->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) && | 
 | 	    skb_get_queue_mapping(tx->skb) == IEEE80211_AC_VO) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (local->hw.conf.flags & IEEE80211_CONF_PS) { | 
 | 		ieee80211_stop_queues_by_reason(&local->hw, | 
 | 						IEEE80211_MAX_QUEUE_MAP, | 
 | 						IEEE80211_QUEUE_STOP_REASON_PS); | 
 | 		ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; | 
 | 		ieee80211_queue_work(&local->hw, | 
 | 				     &local->dynamic_ps_disable_work); | 
 | 	} | 
 |  | 
 | 	/* Don't restart the timer if we're not disassociated */ | 
 | 	if (!ifmgd->associated) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	mod_timer(&local->dynamic_ps_timer, jiffies + | 
 | 		  msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx) | 
 | { | 
 |  | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	bool assoc = false; | 
 |  | 
 | 	if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) && | 
 | 	    test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) && | 
 | 	    !ieee80211_is_probe_req(hdr->frame_control) && | 
 | 	    !ieee80211_is_nullfunc(hdr->frame_control)) | 
 | 		/* | 
 | 		 * When software scanning only nullfunc frames (to notify | 
 | 		 * the sleep state to the AP) and probe requests (for the | 
 | 		 * active scan) are allowed, all other frames should not be | 
 | 		 * sent and we should not get here, but if we do | 
 | 		 * nonetheless, drop them to avoid sending them | 
 | 		 * off-channel. See the link below and | 
 | 		 * ieee80211_start_scan() for more. | 
 | 		 * | 
 | 		 * http://article.gmane.org/gmane.linux.kernel.wireless.general/30089 | 
 | 		 */ | 
 | 		return TX_DROP; | 
 |  | 
 | 	if (tx->sdata->vif.type == NL80211_IFTYPE_WDS) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (tx->flags & IEEE80211_TX_PS_BUFFERED) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (tx->sta) | 
 | 		assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); | 
 |  | 
 | 	if (likely(tx->flags & IEEE80211_TX_UNICAST)) { | 
 | 		if (unlikely(!assoc && | 
 | 			     ieee80211_is_data(hdr->frame_control))) { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 			sdata_info(tx->sdata, | 
 | 				   "dropped data frame to not associated station %pM\n", | 
 | 				   hdr->addr1); | 
 | #endif | 
 | 			I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); | 
 | 			return TX_DROP; | 
 | 		} | 
 | 	} else if (unlikely(tx->sdata->vif.type == NL80211_IFTYPE_AP && | 
 | 			    ieee80211_is_data(hdr->frame_control) && | 
 | 			    !atomic_read(&tx->sdata->u.ap.num_mcast_sta))) { | 
 | 		/* | 
 | 		 * No associated STAs - no need to send multicast | 
 | 		 * frames. | 
 | 		 */ | 
 | 		return TX_DROP; | 
 | 	} | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | /* This function is called whenever the AP is about to exceed the maximum limit | 
 |  * of buffered frames for power saving STAs. This situation should not really | 
 |  * happen often during normal operation, so dropping the oldest buffered packet | 
 |  * from each queue should be OK to make some room for new frames. */ | 
 | static void purge_old_ps_buffers(struct ieee80211_local *local) | 
 | { | 
 | 	int total = 0, purged = 0; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	list_for_each_entry_rcu(sdata, &local->interfaces, list) { | 
 | 		struct ps_data *ps; | 
 |  | 
 | 		if (sdata->vif.type == NL80211_IFTYPE_AP) | 
 | 			ps = &sdata->u.ap.ps; | 
 | 		else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 			ps = &sdata->u.mesh.ps; | 
 | 		else | 
 | 			continue; | 
 |  | 
 | 		skb = skb_dequeue(&ps->bc_buf); | 
 | 		if (skb) { | 
 | 			purged++; | 
 | 			dev_kfree_skb(skb); | 
 | 		} | 
 | 		total += skb_queue_len(&ps->bc_buf); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Drop one frame from each station from the lowest-priority | 
 | 	 * AC that has frames at all. | 
 | 	 */ | 
 | 	list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
 | 		int ac; | 
 |  | 
 | 		for (ac = IEEE80211_AC_BK; ac >= IEEE80211_AC_VO; ac--) { | 
 | 			skb = skb_dequeue(&sta->ps_tx_buf[ac]); | 
 | 			total += skb_queue_len(&sta->ps_tx_buf[ac]); | 
 | 			if (skb) { | 
 | 				purged++; | 
 | 				ieee80211_free_txskb(&local->hw, skb); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	local->total_ps_buffered = total; | 
 | 	ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged); | 
 | } | 
 |  | 
 | static ieee80211_tx_result | 
 | ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
 | 	struct ps_data *ps; | 
 |  | 
 | 	/* | 
 | 	 * broadcast/multicast frame | 
 | 	 * | 
 | 	 * If any of the associated/peer stations is in power save mode, | 
 | 	 * the frame is buffered to be sent after DTIM beacon frame. | 
 | 	 * This is done either by the hardware or us. | 
 | 	 */ | 
 |  | 
 | 	/* powersaving STAs currently only in AP/VLAN/mesh mode */ | 
 | 	if (tx->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
 | 		if (!tx->sdata->bss) | 
 | 			return TX_CONTINUE; | 
 |  | 
 | 		ps = &tx->sdata->bss->ps; | 
 | 	} else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { | 
 | 		ps = &tx->sdata->u.mesh.ps; | 
 | 	} else { | 
 | 		return TX_CONTINUE; | 
 | 	} | 
 |  | 
 |  | 
 | 	/* no buffering for ordered frames */ | 
 | 	if (ieee80211_has_order(hdr->frame_control)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (tx->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) | 
 | 		info->hw_queue = tx->sdata->vif.cab_queue; | 
 |  | 
 | 	/* no stations in PS mode */ | 
 | 	if (!atomic_read(&ps->num_sta_ps)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; | 
 |  | 
 | 	/* device releases frame after DTIM beacon */ | 
 | 	if (!(tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* buffered in mac80211 */ | 
 | 	if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | 
 | 		purge_old_ps_buffers(tx->local); | 
 |  | 
 | 	if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { | 
 | 		ps_dbg(tx->sdata, | 
 | 		       "BC TX buffer full - dropping the oldest frame\n"); | 
 | 		dev_kfree_skb(skb_dequeue(&ps->bc_buf)); | 
 | 	} else | 
 | 		tx->local->total_ps_buffered++; | 
 |  | 
 | 	skb_queue_tail(&ps->bc_buf, tx->skb); | 
 |  | 
 | 	return TX_QUEUED; | 
 | } | 
 |  | 
 | static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta, | 
 | 			     struct sk_buff *skb) | 
 | { | 
 | 	if (!ieee80211_is_mgmt(fc)) | 
 | 		return 0; | 
 |  | 
 | 	if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) | 
 | 		return 0; | 
 |  | 
 | 	if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *) | 
 | 					    skb->data)) | 
 | 		return 0; | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static ieee80211_tx_result | 
 | ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct sta_info *sta = tx->sta; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
 | 	struct ieee80211_local *local = tx->local; | 
 |  | 
 | 	if (unlikely(!sta)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) || | 
 | 		      test_sta_flag(sta, WLAN_STA_PS_DRIVER)) && | 
 | 		     !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) { | 
 | 		int ac = skb_get_queue_mapping(tx->skb); | 
 |  | 
 | 		/* only deauth, disassoc and action are bufferable MMPDUs */ | 
 | 		if (ieee80211_is_mgmt(hdr->frame_control) && | 
 | 		    !ieee80211_is_deauth(hdr->frame_control) && | 
 | 		    !ieee80211_is_disassoc(hdr->frame_control) && | 
 | 		    !ieee80211_is_action(hdr->frame_control)) { | 
 | 			info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; | 
 | 			return TX_CONTINUE; | 
 | 		} | 
 |  | 
 | 		ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n", | 
 | 		       sta->sta.addr, sta->sta.aid, ac); | 
 | 		if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | 
 | 			purge_old_ps_buffers(tx->local); | 
 | 		if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { | 
 | 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]); | 
 | 			ps_dbg(tx->sdata, | 
 | 			       "STA %pM TX buffer for AC %d full - dropping oldest frame\n", | 
 | 			       sta->sta.addr, ac); | 
 | 			ieee80211_free_txskb(&local->hw, old); | 
 | 		} else | 
 | 			tx->local->total_ps_buffered++; | 
 |  | 
 | 		info->control.jiffies = jiffies; | 
 | 		info->control.vif = &tx->sdata->vif; | 
 | 		info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; | 
 | 		skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb); | 
 |  | 
 | 		if (!timer_pending(&local->sta_cleanup)) | 
 | 			mod_timer(&local->sta_cleanup, | 
 | 				  round_jiffies(jiffies + | 
 | 						STA_INFO_CLEANUP_INTERVAL)); | 
 |  | 
 | 		/* | 
 | 		 * We queued up some frames, so the TIM bit might | 
 | 		 * need to be set, recalculate it. | 
 | 		 */ | 
 | 		sta_info_recalc_tim(sta); | 
 |  | 
 | 		return TX_QUEUED; | 
 | 	} else if (unlikely(test_sta_flag(sta, WLAN_STA_PS_STA))) { | 
 | 		ps_dbg(tx->sdata, | 
 | 		       "STA %pM in PS mode, but polling/in SP -> send frame\n", | 
 | 		       sta->sta.addr); | 
 | 	} | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (tx->flags & IEEE80211_TX_UNICAST) | 
 | 		return ieee80211_tx_h_unicast_ps_buf(tx); | 
 | 	else | 
 | 		return ieee80211_tx_h_multicast_ps_buf(tx); | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 |  | 
 | 	if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol && | 
 | 		     tx->sdata->control_port_no_encrypt)) | 
 | 		info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_key *key; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
 |  | 
 | 	if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) | 
 | 		tx->key = NULL; | 
 | 	else if (tx->sta && (key = rcu_dereference(tx->sta->ptk))) | 
 | 		tx->key = key; | 
 | 	else if (ieee80211_is_mgmt(hdr->frame_control) && | 
 | 		 is_multicast_ether_addr(hdr->addr1) && | 
 | 		 ieee80211_is_robust_mgmt_frame(hdr) && | 
 | 		 (key = rcu_dereference(tx->sdata->default_mgmt_key))) | 
 | 		tx->key = key; | 
 | 	else if (is_multicast_ether_addr(hdr->addr1) && | 
 | 		 (key = rcu_dereference(tx->sdata->default_multicast_key))) | 
 | 		tx->key = key; | 
 | 	else if (!is_multicast_ether_addr(hdr->addr1) && | 
 | 		 (key = rcu_dereference(tx->sdata->default_unicast_key))) | 
 | 		tx->key = key; | 
 | 	else if (info->flags & IEEE80211_TX_CTL_INJECTED) | 
 | 		tx->key = NULL; | 
 | 	else if (!tx->sdata->drop_unencrypted) | 
 | 		tx->key = NULL; | 
 | 	else if (tx->skb->protocol == tx->sdata->control_port_protocol) | 
 | 		tx->key = NULL; | 
 | 	else if (ieee80211_is_robust_mgmt_frame(hdr) && | 
 | 		 !(ieee80211_is_action(hdr->frame_control) && | 
 | 		   tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP))) | 
 | 		tx->key = NULL; | 
 | 	else if (ieee80211_is_mgmt(hdr->frame_control) && | 
 | 		 !ieee80211_is_robust_mgmt_frame(hdr)) | 
 | 		tx->key = NULL; | 
 | 	else { | 
 | 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); | 
 | 		return TX_DROP; | 
 | 	} | 
 |  | 
 | 	if (tx->key) { | 
 | 		bool skip_hw = false; | 
 |  | 
 | 		tx->key->tx_rx_count++; | 
 | 		/* TODO: add threshold stuff again */ | 
 |  | 
 | 		switch (tx->key->conf.cipher) { | 
 | 		case WLAN_CIPHER_SUITE_WEP40: | 
 | 		case WLAN_CIPHER_SUITE_WEP104: | 
 | 		case WLAN_CIPHER_SUITE_TKIP: | 
 | 			if (!ieee80211_is_data_present(hdr->frame_control)) | 
 | 				tx->key = NULL; | 
 | 			break; | 
 | 		case WLAN_CIPHER_SUITE_CCMP: | 
 | 			if (!ieee80211_is_data_present(hdr->frame_control) && | 
 | 			    !ieee80211_use_mfp(hdr->frame_control, tx->sta, | 
 | 					       tx->skb)) | 
 | 				tx->key = NULL; | 
 | 			else | 
 | 				skip_hw = (tx->key->conf.flags & | 
 | 					   IEEE80211_KEY_FLAG_SW_MGMT_TX) && | 
 | 					ieee80211_is_mgmt(hdr->frame_control); | 
 | 			break; | 
 | 		case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 			if (!ieee80211_is_mgmt(hdr->frame_control)) | 
 | 				tx->key = NULL; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED && | 
 | 			     !ieee80211_is_deauth(hdr->frame_control))) | 
 | 			return TX_DROP; | 
 |  | 
 | 		if (!skip_hw && tx->key && | 
 | 		    tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | 
 | 			info->control.hw_key = &tx->key->conf; | 
 | 	} | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	struct ieee80211_hdr *hdr = (void *)tx->skb->data; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	u32 len; | 
 | 	struct ieee80211_tx_rate_control txrc; | 
 | 	struct ieee80211_sta_rates *ratetbl = NULL; | 
 | 	bool assoc = false; | 
 |  | 
 | 	memset(&txrc, 0, sizeof(txrc)); | 
 |  | 
 | 	sband = tx->local->hw.wiphy->bands[info->band]; | 
 |  | 
 | 	len = min_t(u32, tx->skb->len + FCS_LEN, | 
 | 			 tx->local->hw.wiphy->frag_threshold); | 
 |  | 
 | 	/* set up the tx rate control struct we give the RC algo */ | 
 | 	txrc.hw = &tx->local->hw; | 
 | 	txrc.sband = sband; | 
 | 	txrc.bss_conf = &tx->sdata->vif.bss_conf; | 
 | 	txrc.skb = tx->skb; | 
 | 	txrc.reported_rate.idx = -1; | 
 | 	txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; | 
 | 	if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1) | 
 | 		txrc.max_rate_idx = -1; | 
 | 	else | 
 | 		txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; | 
 |  | 
 | 	if (tx->sdata->rc_has_mcs_mask[info->band]) | 
 | 		txrc.rate_idx_mcs_mask = | 
 | 			tx->sdata->rc_rateidx_mcs_mask[info->band]; | 
 |  | 
 | 	txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 		    tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || | 
 | 		    tx->sdata->vif.type == NL80211_IFTYPE_ADHOC); | 
 |  | 
 | 	/* set up RTS protection if desired */ | 
 | 	if (len > tx->local->hw.wiphy->rts_threshold) { | 
 | 		txrc.rts = true; | 
 | 	} | 
 |  | 
 | 	info->control.use_rts = txrc.rts; | 
 | 	info->control.use_cts_prot = tx->sdata->vif.bss_conf.use_cts_prot; | 
 |  | 
 | 	/* | 
 | 	 * Use short preamble if the BSS can handle it, but not for | 
 | 	 * management frames unless we know the receiver can handle | 
 | 	 * that -- the management frame might be to a station that | 
 | 	 * just wants a probe response. | 
 | 	 */ | 
 | 	if (tx->sdata->vif.bss_conf.use_short_preamble && | 
 | 	    (ieee80211_is_data(hdr->frame_control) || | 
 | 	     (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) | 
 | 		txrc.short_preamble = true; | 
 |  | 
 | 	info->control.short_preamble = txrc.short_preamble; | 
 |  | 
 | 	if (tx->sta) | 
 | 		assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); | 
 |  | 
 | 	/* | 
 | 	 * Lets not bother rate control if we're associated and cannot | 
 | 	 * talk to the sta. This should not happen. | 
 | 	 */ | 
 | 	if (WARN(test_bit(SCAN_SW_SCANNING, &tx->local->scanning) && assoc && | 
 | 		 !rate_usable_index_exists(sband, &tx->sta->sta), | 
 | 		 "%s: Dropped data frame as no usable bitrate found while " | 
 | 		 "scanning and associated. Target station: " | 
 | 		 "%pM on %d GHz band\n", | 
 | 		 tx->sdata->name, hdr->addr1, | 
 | 		 info->band ? 5 : 2)) | 
 | 		return TX_DROP; | 
 |  | 
 | 	/* | 
 | 	 * If we're associated with the sta at this point we know we can at | 
 | 	 * least send the frame at the lowest bit rate. | 
 | 	 */ | 
 | 	rate_control_get_rate(tx->sdata, tx->sta, &txrc); | 
 |  | 
 | 	if (tx->sta && !info->control.skip_table) | 
 | 		ratetbl = rcu_dereference(tx->sta->sta.rates); | 
 |  | 
 | 	if (unlikely(info->control.rates[0].idx < 0)) { | 
 | 		if (ratetbl) { | 
 | 			struct ieee80211_tx_rate rate = { | 
 | 				.idx = ratetbl->rate[0].idx, | 
 | 				.flags = ratetbl->rate[0].flags, | 
 | 				.count = ratetbl->rate[0].count | 
 | 			}; | 
 |  | 
 | 			if (ratetbl->rate[0].idx < 0) | 
 | 				return TX_DROP; | 
 |  | 
 | 			tx->rate = rate; | 
 | 		} else { | 
 | 			return TX_DROP; | 
 | 		} | 
 | 	} else { | 
 | 		tx->rate = info->control.rates[0]; | 
 | 	} | 
 |  | 
 | 	if (txrc.reported_rate.idx < 0) { | 
 | 		txrc.reported_rate = tx->rate; | 
 | 		if (tx->sta && ieee80211_is_data(hdr->frame_control)) | 
 | 			tx->sta->last_tx_rate = txrc.reported_rate; | 
 | 	} else if (tx->sta) | 
 | 		tx->sta->last_tx_rate = txrc.reported_rate; | 
 |  | 
 | 	if (ratetbl) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (unlikely(!info->control.rates[0].count)) | 
 | 		info->control.rates[0].count = 1; | 
 |  | 
 | 	if (WARN_ON_ONCE((info->control.rates[0].count > 1) && | 
 | 			 (info->flags & IEEE80211_TX_CTL_NO_ACK))) | 
 | 		info->control.rates[0].count = 1; | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | 
 | 	u16 *seq; | 
 | 	u8 *qc; | 
 | 	int tid; | 
 |  | 
 | 	/* | 
 | 	 * Packet injection may want to control the sequence | 
 | 	 * number, if we have no matching interface then we | 
 | 	 * neither assign one ourselves nor ask the driver to. | 
 | 	 */ | 
 | 	if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (unlikely(ieee80211_is_ctl(hdr->frame_control))) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (ieee80211_hdrlen(hdr->frame_control) < 24) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (ieee80211_is_qos_nullfunc(hdr->frame_control)) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Anything but QoS data that has a sequence number field | 
 | 	 * (is long enough) gets a sequence number from the global | 
 | 	 * counter. | 
 | 	 */ | 
 | 	if (!ieee80211_is_data_qos(hdr->frame_control)) { | 
 | 		/* driver should assign sequence number */ | 
 | 		info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | 
 | 		/* for pure STA mode without beacons, we can do it */ | 
 | 		hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number); | 
 | 		tx->sdata->sequence_number += 0x10; | 
 | 		return TX_CONTINUE; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * This should be true for injected/management frames only, for | 
 | 	 * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ | 
 | 	 * above since they are not QoS-data frames. | 
 | 	 */ | 
 | 	if (!tx->sta) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* include per-STA, per-TID sequence counter */ | 
 |  | 
 | 	qc = ieee80211_get_qos_ctl(hdr); | 
 | 	tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | 
 | 	seq = &tx->sta->tid_seq[tid]; | 
 |  | 
 | 	hdr->seq_ctrl = cpu_to_le16(*seq); | 
 |  | 
 | 	/* Increase the sequence number. */ | 
 | 	*seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static int ieee80211_fragment(struct ieee80211_tx_data *tx, | 
 | 			      struct sk_buff *skb, int hdrlen, | 
 | 			      int frag_threshold) | 
 | { | 
 | 	struct ieee80211_local *local = tx->local; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct sk_buff *tmp; | 
 | 	int per_fragm = frag_threshold - hdrlen - FCS_LEN; | 
 | 	int pos = hdrlen + per_fragm; | 
 | 	int rem = skb->len - hdrlen - per_fragm; | 
 |  | 
 | 	if (WARN_ON(rem < 0)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* first fragment was already added to queue by caller */ | 
 |  | 
 | 	while (rem) { | 
 | 		int fraglen = per_fragm; | 
 |  | 
 | 		if (fraglen > rem) | 
 | 			fraglen = rem; | 
 | 		rem -= fraglen; | 
 | 		tmp = dev_alloc_skb(local->tx_headroom + | 
 | 				    frag_threshold + | 
 | 				    IEEE80211_ENCRYPT_HEADROOM + | 
 | 				    IEEE80211_ENCRYPT_TAILROOM); | 
 | 		if (!tmp) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		__skb_queue_tail(&tx->skbs, tmp); | 
 |  | 
 | 		skb_reserve(tmp, local->tx_headroom + | 
 | 				 IEEE80211_ENCRYPT_HEADROOM); | 
 | 		/* copy control information */ | 
 | 		memcpy(tmp->cb, skb->cb, sizeof(tmp->cb)); | 
 |  | 
 | 		info = IEEE80211_SKB_CB(tmp); | 
 | 		info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | | 
 | 				 IEEE80211_TX_CTL_FIRST_FRAGMENT); | 
 |  | 
 | 		if (rem) | 
 | 			info->flags |= IEEE80211_TX_CTL_MORE_FRAMES; | 
 |  | 
 | 		skb_copy_queue_mapping(tmp, skb); | 
 | 		tmp->priority = skb->priority; | 
 | 		tmp->dev = skb->dev; | 
 |  | 
 | 		/* copy header and data */ | 
 | 		memcpy(skb_put(tmp, hdrlen), skb->data, hdrlen); | 
 | 		memcpy(skb_put(tmp, fraglen), skb->data + pos, fraglen); | 
 |  | 
 | 		pos += fraglen; | 
 | 	} | 
 |  | 
 | 	/* adjust first fragment's length */ | 
 | 	skb->len = hdrlen + per_fragm; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct sk_buff *skb = tx->skb; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	struct ieee80211_hdr *hdr = (void *)skb->data; | 
 | 	int frag_threshold = tx->local->hw.wiphy->frag_threshold; | 
 | 	int hdrlen; | 
 | 	int fragnum; | 
 |  | 
 | 	/* no matter what happens, tx->skb moves to tx->skbs */ | 
 | 	__skb_queue_tail(&tx->skbs, skb); | 
 | 	tx->skb = NULL; | 
 |  | 
 | 	if (info->flags & IEEE80211_TX_CTL_DONTFRAG) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	if (tx->local->ops->set_frag_threshold) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	/* | 
 | 	 * Warn when submitting a fragmented A-MPDU frame and drop it. | 
 | 	 * This scenario is handled in ieee80211_tx_prepare but extra | 
 | 	 * caution taken here as fragmented ampdu may cause Tx stop. | 
 | 	 */ | 
 | 	if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) | 
 | 		return TX_DROP; | 
 |  | 
 | 	hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
 |  | 
 | 	/* internal error, why isn't DONTFRAG set? */ | 
 | 	if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) | 
 | 		return TX_DROP; | 
 |  | 
 | 	/* | 
 | 	 * Now fragment the frame. This will allocate all the fragments and | 
 | 	 * chain them (using skb as the first fragment) to skb->next. | 
 | 	 * During transmission, we will remove the successfully transmitted | 
 | 	 * fragments from this list. When the low-level driver rejects one | 
 | 	 * of the fragments then we will simply pretend to accept the skb | 
 | 	 * but store it away as pending. | 
 | 	 */ | 
 | 	if (ieee80211_fragment(tx, skb, hdrlen, frag_threshold)) | 
 | 		return TX_DROP; | 
 |  | 
 | 	/* update duration/seq/flags of fragments */ | 
 | 	fragnum = 0; | 
 |  | 
 | 	skb_queue_walk(&tx->skbs, skb) { | 
 | 		const __le16 morefrags = cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); | 
 |  | 
 | 		hdr = (void *)skb->data; | 
 | 		info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 		if (!skb_queue_is_last(&tx->skbs, skb)) { | 
 | 			hdr->frame_control |= morefrags; | 
 | 			/* | 
 | 			 * No multi-rate retries for fragmented frames, that | 
 | 			 * would completely throw off the NAV at other STAs. | 
 | 			 */ | 
 | 			info->control.rates[1].idx = -1; | 
 | 			info->control.rates[2].idx = -1; | 
 | 			info->control.rates[3].idx = -1; | 
 | 			BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4); | 
 | 			info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; | 
 | 		} else { | 
 | 			hdr->frame_control &= ~morefrags; | 
 | 		} | 
 | 		hdr->seq_ctrl |= cpu_to_le16(fragnum & IEEE80211_SCTL_FRAG); | 
 | 		fragnum++; | 
 | 	} | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_stats(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	int ac = -1; | 
 |  | 
 | 	if (!tx->sta) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	skb_queue_walk(&tx->skbs, skb) { | 
 | 		ac = skb_get_queue_mapping(skb); | 
 | 		tx->sta->tx_fragments++; | 
 | 		tx->sta->tx_bytes[ac] += skb->len; | 
 | 	} | 
 | 	if (ac >= 0) | 
 | 		tx->sta->tx_packets[ac]++; | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	if (!tx->key) | 
 | 		return TX_CONTINUE; | 
 |  | 
 | 	switch (tx->key->conf.cipher) { | 
 | 	case WLAN_CIPHER_SUITE_WEP40: | 
 | 	case WLAN_CIPHER_SUITE_WEP104: | 
 | 		return ieee80211_crypto_wep_encrypt(tx); | 
 | 	case WLAN_CIPHER_SUITE_TKIP: | 
 | 		return ieee80211_crypto_tkip_encrypt(tx); | 
 | 	case WLAN_CIPHER_SUITE_CCMP: | 
 | 		return ieee80211_crypto_ccmp_encrypt(tx); | 
 | 	case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 		return ieee80211_crypto_aes_cmac_encrypt(tx); | 
 | 	default: | 
 | 		return ieee80211_crypto_hw_encrypt(tx); | 
 | 	} | 
 |  | 
 | 	return TX_DROP; | 
 | } | 
 |  | 
 | static ieee80211_tx_result debug_noinline | 
 | ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	int next_len; | 
 | 	bool group_addr; | 
 |  | 
 | 	skb_queue_walk(&tx->skbs, skb) { | 
 | 		hdr = (void *) skb->data; | 
 | 		if (unlikely(ieee80211_is_pspoll(hdr->frame_control))) | 
 | 			break; /* must not overwrite AID */ | 
 | 		if (!skb_queue_is_last(&tx->skbs, skb)) { | 
 | 			struct sk_buff *next = skb_queue_next(&tx->skbs, skb); | 
 | 			next_len = next->len; | 
 | 		} else | 
 | 			next_len = 0; | 
 | 		group_addr = is_multicast_ether_addr(hdr->addr1); | 
 |  | 
 | 		hdr->duration_id = | 
 | 			ieee80211_duration(tx, skb, group_addr, next_len); | 
 | 	} | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | /* actual transmit path */ | 
 |  | 
 | static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data *tx, | 
 | 				  struct sk_buff *skb, | 
 | 				  struct ieee80211_tx_info *info, | 
 | 				  struct tid_ampdu_tx *tid_tx, | 
 | 				  int tid) | 
 | { | 
 | 	bool queued = false; | 
 | 	bool reset_agg_timer = false; | 
 | 	struct sk_buff *purge_skb = NULL; | 
 |  | 
 | 	if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | 
 | 		info->flags |= IEEE80211_TX_CTL_AMPDU; | 
 | 		reset_agg_timer = true; | 
 | 	} else if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { | 
 | 		/* | 
 | 		 * nothing -- this aggregation session is being started | 
 | 		 * but that might still fail with the driver | 
 | 		 */ | 
 | 	} else { | 
 | 		spin_lock(&tx->sta->lock); | 
 | 		/* | 
 | 		 * Need to re-check now, because we may get here | 
 | 		 * | 
 | 		 *  1) in the window during which the setup is actually | 
 | 		 *     already done, but not marked yet because not all | 
 | 		 *     packets are spliced over to the driver pending | 
 | 		 *     queue yet -- if this happened we acquire the lock | 
 | 		 *     either before or after the splice happens, but | 
 | 		 *     need to recheck which of these cases happened. | 
 | 		 * | 
 | 		 *  2) during session teardown, if the OPERATIONAL bit | 
 | 		 *     was cleared due to the teardown but the pointer | 
 | 		 *     hasn't been assigned NULL yet (or we loaded it | 
 | 		 *     before it was assigned) -- in this case it may | 
 | 		 *     now be NULL which means we should just let the | 
 | 		 *     packet pass through because splicing the frames | 
 | 		 *     back is already done. | 
 | 		 */ | 
 | 		tid_tx = rcu_dereference_protected_tid_tx(tx->sta, tid); | 
 |  | 
 | 		if (!tid_tx) { | 
 | 			/* do nothing, let packet pass through */ | 
 | 		} else if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | 
 | 			info->flags |= IEEE80211_TX_CTL_AMPDU; | 
 | 			reset_agg_timer = true; | 
 | 		} else { | 
 | 			queued = true; | 
 | 			info->control.vif = &tx->sdata->vif; | 
 | 			info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; | 
 | 			__skb_queue_tail(&tid_tx->pending, skb); | 
 | 			if (skb_queue_len(&tid_tx->pending) > STA_MAX_TX_BUFFER) | 
 | 				purge_skb = __skb_dequeue(&tid_tx->pending); | 
 | 		} | 
 | 		spin_unlock(&tx->sta->lock); | 
 |  | 
 | 		if (purge_skb) | 
 | 			ieee80211_free_txskb(&tx->local->hw, purge_skb); | 
 | 	} | 
 |  | 
 | 	/* reset session timer */ | 
 | 	if (reset_agg_timer && tid_tx->timeout) | 
 | 		tid_tx->last_tx = jiffies; | 
 |  | 
 | 	return queued; | 
 | } | 
 |  | 
 | /* | 
 |  * initialises @tx | 
 |  */ | 
 | static ieee80211_tx_result | 
 | ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, | 
 | 		     struct ieee80211_tx_data *tx, | 
 | 		     struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	int tid; | 
 | 	u8 *qc; | 
 |  | 
 | 	memset(tx, 0, sizeof(*tx)); | 
 | 	tx->skb = skb; | 
 | 	tx->local = local; | 
 | 	tx->sdata = sdata; | 
 | 	__skb_queue_head_init(&tx->skbs); | 
 |  | 
 | 	/* | 
 | 	 * If this flag is set to true anywhere, and we get here, | 
 | 	 * we are doing the needed processing, so remove the flag | 
 | 	 * now. | 
 | 	 */ | 
 | 	info->flags &= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING; | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *) skb->data; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
 | 		tx->sta = rcu_dereference(sdata->u.vlan.sta); | 
 | 		if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) | 
 | 			return TX_DROP; | 
 | 	} else if (info->flags & IEEE80211_TX_CTL_INJECTED || | 
 | 		   tx->sdata->control_port_protocol == tx->skb->protocol) { | 
 | 		tx->sta = sta_info_get_bss(sdata, hdr->addr1); | 
 | 	} | 
 | 	if (!tx->sta) | 
 | 		tx->sta = sta_info_get(sdata, hdr->addr1); | 
 |  | 
 | 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && | 
 | 	    !ieee80211_is_qos_nullfunc(hdr->frame_control) && | 
 | 	    (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION) && | 
 | 	    !(local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW)) { | 
 | 		struct tid_ampdu_tx *tid_tx; | 
 |  | 
 | 		qc = ieee80211_get_qos_ctl(hdr); | 
 | 		tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | 
 |  | 
 | 		tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]); | 
 | 		if (tid_tx) { | 
 | 			bool queued; | 
 |  | 
 | 			queued = ieee80211_tx_prep_agg(tx, skb, info, | 
 | 						       tid_tx, tid); | 
 |  | 
 | 			if (unlikely(queued)) | 
 | 				return TX_QUEUED; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (is_multicast_ether_addr(hdr->addr1)) { | 
 | 		tx->flags &= ~IEEE80211_TX_UNICAST; | 
 | 		info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
 | 	} else | 
 | 		tx->flags |= IEEE80211_TX_UNICAST; | 
 |  | 
 | 	if (!(info->flags & IEEE80211_TX_CTL_DONTFRAG)) { | 
 | 		if (!(tx->flags & IEEE80211_TX_UNICAST) || | 
 | 		    skb->len + FCS_LEN <= local->hw.wiphy->frag_threshold || | 
 | 		    info->flags & IEEE80211_TX_CTL_AMPDU) | 
 | 			info->flags |= IEEE80211_TX_CTL_DONTFRAG; | 
 | 	} | 
 |  | 
 | 	if (!tx->sta) | 
 | 		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | 
 | 	else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT)) | 
 | 		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | 
 |  | 
 | 	info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT; | 
 |  | 
 | 	return TX_CONTINUE; | 
 | } | 
 |  | 
 | static bool ieee80211_tx_frags(struct ieee80211_local *local, | 
 | 			       struct ieee80211_vif *vif, | 
 | 			       struct ieee80211_sta *sta, | 
 | 			       struct sk_buff_head *skbs, | 
 | 			       bool txpending) | 
 | { | 
 | 	struct ieee80211_tx_control control; | 
 | 	struct sk_buff *skb, *tmp; | 
 | 	unsigned long flags; | 
 |  | 
 | 	skb_queue_walk_safe(skbs, skb, tmp) { | 
 | 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 		int q = info->hw_queue; | 
 |  | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 		if (WARN_ON_ONCE(q >= local->hw.queues)) { | 
 | 			__skb_unlink(skb, skbs); | 
 | 			ieee80211_free_txskb(&local->hw, skb); | 
 | 			continue; | 
 | 		} | 
 | #endif | 
 |  | 
 | 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
 | 		if (local->queue_stop_reasons[q] || | 
 | 		    (!txpending && !skb_queue_empty(&local->pending[q]))) { | 
 | 			if (unlikely(info->flags & | 
 | 				     IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) { | 
 | 				if (local->queue_stop_reasons[q] & | 
 | 				    ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL)) { | 
 | 					/* | 
 | 					 * Drop off-channel frames if queues | 
 | 					 * are stopped for any reason other | 
 | 					 * than off-channel operation. Never | 
 | 					 * queue them. | 
 | 					 */ | 
 | 					spin_unlock_irqrestore( | 
 | 						&local->queue_stop_reason_lock, | 
 | 						flags); | 
 | 					ieee80211_purge_tx_queue(&local->hw, | 
 | 								 skbs); | 
 | 					return true; | 
 | 				} | 
 | 			} else { | 
 |  | 
 | 				/* | 
 | 				 * Since queue is stopped, queue up frames for | 
 | 				 * later transmission from the tx-pending | 
 | 				 * tasklet when the queue is woken again. | 
 | 				 */ | 
 | 				if (txpending) | 
 | 					skb_queue_splice_init(skbs, | 
 | 							      &local->pending[q]); | 
 | 				else | 
 | 					skb_queue_splice_tail_init(skbs, | 
 | 								   &local->pending[q]); | 
 |  | 
 | 				spin_unlock_irqrestore(&local->queue_stop_reason_lock, | 
 | 						       flags); | 
 | 				return false; | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
 |  | 
 | 		info->control.vif = vif; | 
 | 		control.sta = sta; | 
 |  | 
 | 		__skb_unlink(skb, skbs); | 
 | 		drv_tx(local, &control, skb); | 
 | 	} | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | /* | 
 |  * Returns false if the frame couldn't be transmitted but was queued instead. | 
 |  */ | 
 | static bool __ieee80211_tx(struct ieee80211_local *local, | 
 | 			   struct sk_buff_head *skbs, int led_len, | 
 | 			   struct sta_info *sta, bool txpending) | 
 | { | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_vif *vif; | 
 | 	struct ieee80211_sta *pubsta; | 
 | 	struct sk_buff *skb; | 
 | 	bool result = true; | 
 | 	__le16 fc; | 
 |  | 
 | 	if (WARN_ON(skb_queue_empty(skbs))) | 
 | 		return true; | 
 |  | 
 | 	skb = skb_peek(skbs); | 
 | 	fc = ((struct ieee80211_hdr *)skb->data)->frame_control; | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 | 	sdata = vif_to_sdata(info->control.vif); | 
 | 	if (sta && !sta->uploaded) | 
 | 		sta = NULL; | 
 |  | 
 | 	if (sta) | 
 | 		pubsta = &sta->sta; | 
 | 	else | 
 | 		pubsta = NULL; | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_MONITOR: | 
 | 		sdata = rcu_dereference(local->monitor_sdata); | 
 | 		if (sdata) { | 
 | 			vif = &sdata->vif; | 
 | 			info->hw_queue = | 
 | 				vif->hw_queue[skb_get_queue_mapping(skb)]; | 
 | 		} else if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) { | 
 | 			dev_kfree_skb(skb); | 
 | 			return true; | 
 | 		} else | 
 | 			vif = NULL; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 		sdata = container_of(sdata->bss, | 
 | 				     struct ieee80211_sub_if_data, u.ap); | 
 | 		/* fall through */ | 
 | 	default: | 
 | 		vif = &sdata->vif; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	result = ieee80211_tx_frags(local, vif, pubsta, skbs, | 
 | 				    txpending); | 
 |  | 
 | 	ieee80211_tpt_led_trig_tx(local, fc, led_len); | 
 | 	ieee80211_led_tx(local, 1); | 
 |  | 
 | 	WARN_ON_ONCE(!skb_queue_empty(skbs)); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* | 
 |  * Invoke TX handlers, return 0 on success and non-zero if the | 
 |  * frame was dropped or queued. | 
 |  */ | 
 | static int invoke_tx_handlers(struct ieee80211_tx_data *tx) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | 
 | 	ieee80211_tx_result res = TX_DROP; | 
 |  | 
 | #define CALL_TXH(txh) \ | 
 | 	do {				\ | 
 | 		res = txh(tx);		\ | 
 | 		if (res != TX_CONTINUE)	\ | 
 | 			goto txh_done;	\ | 
 | 	} while (0) | 
 |  | 
 | 	CALL_TXH(ieee80211_tx_h_dynamic_ps); | 
 | 	CALL_TXH(ieee80211_tx_h_check_assoc); | 
 | 	CALL_TXH(ieee80211_tx_h_ps_buf); | 
 | 	CALL_TXH(ieee80211_tx_h_check_control_port_protocol); | 
 | 	CALL_TXH(ieee80211_tx_h_select_key); | 
 | 	if (!(tx->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)) | 
 | 		CALL_TXH(ieee80211_tx_h_rate_ctrl); | 
 |  | 
 | 	if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION)) { | 
 | 		__skb_queue_tail(&tx->skbs, tx->skb); | 
 | 		tx->skb = NULL; | 
 | 		goto txh_done; | 
 | 	} | 
 |  | 
 | 	CALL_TXH(ieee80211_tx_h_michael_mic_add); | 
 | 	CALL_TXH(ieee80211_tx_h_sequence); | 
 | 	CALL_TXH(ieee80211_tx_h_fragment); | 
 | 	/* handlers after fragment must be aware of tx info fragmentation! */ | 
 | 	CALL_TXH(ieee80211_tx_h_stats); | 
 | 	CALL_TXH(ieee80211_tx_h_encrypt); | 
 | 	if (!(tx->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)) | 
 | 		CALL_TXH(ieee80211_tx_h_calculate_duration); | 
 | #undef CALL_TXH | 
 |  | 
 |  txh_done: | 
 | 	if (unlikely(res == TX_DROP)) { | 
 | 		I802_DEBUG_INC(tx->local->tx_handlers_drop); | 
 | 		if (tx->skb) | 
 | 			ieee80211_free_txskb(&tx->local->hw, tx->skb); | 
 | 		else | 
 | 			ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); | 
 | 		return -1; | 
 | 	} else if (unlikely(res == TX_QUEUED)) { | 
 | 		I802_DEBUG_INC(tx->local->tx_handlers_queued); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Returns false if the frame couldn't be transmitted but was queued instead. | 
 |  */ | 
 | static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, | 
 | 			 struct sk_buff *skb, bool txpending, | 
 | 			 enum ieee80211_band band) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_tx_data tx; | 
 | 	ieee80211_tx_result res_prepare; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	bool result = true; | 
 | 	int led_len; | 
 |  | 
 | 	if (unlikely(skb->len < 10)) { | 
 | 		dev_kfree_skb(skb); | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	/* initialises tx */ | 
 | 	led_len = skb->len; | 
 | 	res_prepare = ieee80211_tx_prepare(sdata, &tx, skb); | 
 |  | 
 | 	if (unlikely(res_prepare == TX_DROP)) { | 
 | 		ieee80211_free_txskb(&local->hw, skb); | 
 | 		return true; | 
 | 	} else if (unlikely(res_prepare == TX_QUEUED)) { | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	info->band = band; | 
 |  | 
 | 	/* set up hw_queue value early */ | 
 | 	if (!(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) || | 
 | 	    !(local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)) | 
 | 		info->hw_queue = | 
 | 			sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; | 
 |  | 
 | 	if (!invoke_tx_handlers(&tx)) | 
 | 		result = __ieee80211_tx(local, &tx.skbs, led_len, | 
 | 					tx.sta, txpending); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* device xmit handlers */ | 
 |  | 
 | static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata, | 
 | 				struct sk_buff *skb, | 
 | 				int head_need, bool may_encrypt) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	int tail_need = 0; | 
 |  | 
 | 	if (may_encrypt && sdata->crypto_tx_tailroom_needed_cnt) { | 
 | 		tail_need = IEEE80211_ENCRYPT_TAILROOM; | 
 | 		tail_need -= skb_tailroom(skb); | 
 | 		tail_need = max_t(int, tail_need, 0); | 
 | 	} | 
 |  | 
 | 	if (skb_cloned(skb)) | 
 | 		I802_DEBUG_INC(local->tx_expand_skb_head_cloned); | 
 | 	else if (head_need || tail_need) | 
 | 		I802_DEBUG_INC(local->tx_expand_skb_head); | 
 | 	else | 
 | 		return 0; | 
 |  | 
 | 	if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) { | 
 | 		wiphy_debug(local->hw.wiphy, | 
 | 			    "failed to reallocate TX buffer\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, | 
 | 		    enum ieee80211_band band) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	int headroom; | 
 | 	bool may_encrypt; | 
 |  | 
 | 	may_encrypt = !(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT); | 
 |  | 
 | 	headroom = local->tx_headroom; | 
 | 	if (may_encrypt) | 
 | 		headroom += IEEE80211_ENCRYPT_HEADROOM; | 
 | 	headroom -= skb_headroom(skb); | 
 | 	headroom = max_t(int, 0, headroom); | 
 |  | 
 | 	if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) { | 
 | 		ieee80211_free_txskb(&local->hw, skb); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	info->control.vif = &sdata->vif; | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
 | 		if (ieee80211_is_data(hdr->frame_control) && | 
 | 		    is_unicast_ether_addr(hdr->addr1)) { | 
 | 			if (mesh_nexthop_resolve(sdata, skb)) | 
 | 				return; /* skb queued: don't free */ | 
 | 		} else { | 
 | 			ieee80211_mps_set_frame_flags(sdata, NULL, hdr); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ieee80211_set_qos_hdr(sdata, skb); | 
 | 	ieee80211_tx(sdata, skb, false, band); | 
 | } | 
 |  | 
 | static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_radiotap_iterator iterator; | 
 | 	struct ieee80211_radiotap_header *rthdr = | 
 | 		(struct ieee80211_radiotap_header *) skb->data; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len, | 
 | 						   NULL); | 
 | 	u16 txflags; | 
 |  | 
 | 	info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | | 
 | 		       IEEE80211_TX_CTL_DONTFRAG; | 
 |  | 
 | 	/* | 
 | 	 * for every radiotap entry that is present | 
 | 	 * (ieee80211_radiotap_iterator_next returns -ENOENT when no more | 
 | 	 * entries present, or -EINVAL on error) | 
 | 	 */ | 
 |  | 
 | 	while (!ret) { | 
 | 		ret = ieee80211_radiotap_iterator_next(&iterator); | 
 |  | 
 | 		if (ret) | 
 | 			continue; | 
 |  | 
 | 		/* see if this argument is something we can use */ | 
 | 		switch (iterator.this_arg_index) { | 
 | 		/* | 
 | 		 * You must take care when dereferencing iterator.this_arg | 
 | 		 * for multibyte types... the pointer is not aligned.  Use | 
 | 		 * get_unaligned((type *)iterator.this_arg) to dereference | 
 | 		 * iterator.this_arg for type "type" safely on all arches. | 
 | 		*/ | 
 | 		case IEEE80211_RADIOTAP_FLAGS: | 
 | 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { | 
 | 				/* | 
 | 				 * this indicates that the skb we have been | 
 | 				 * handed has the 32-bit FCS CRC at the end... | 
 | 				 * we should react to that by snipping it off | 
 | 				 * because it will be recomputed and added | 
 | 				 * on transmission | 
 | 				 */ | 
 | 				if (skb->len < (iterator._max_length + FCS_LEN)) | 
 | 					return false; | 
 |  | 
 | 				skb_trim(skb, skb->len - FCS_LEN); | 
 | 			} | 
 | 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) | 
 | 				info->flags &= ~IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
 | 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) | 
 | 				info->flags &= ~IEEE80211_TX_CTL_DONTFRAG; | 
 | 			break; | 
 |  | 
 | 		case IEEE80211_RADIOTAP_TX_FLAGS: | 
 | 			txflags = get_unaligned_le16(iterator.this_arg); | 
 | 			if (txflags & IEEE80211_RADIOTAP_F_TX_NOACK) | 
 | 				info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * Please update the file | 
 | 		 * Documentation/networking/mac80211-injection.txt | 
 | 		 * when parsing new fields here. | 
 | 		 */ | 
 |  | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ | 
 | 		return false; | 
 |  | 
 | 	/* | 
 | 	 * remove the radiotap header | 
 | 	 * iterator->_max_length was sanity-checked against | 
 | 	 * skb->len by iterator init | 
 | 	 */ | 
 | 	skb_pull(skb, iterator._max_length); | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, | 
 | 					 struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 | 	struct ieee80211_channel *chan; | 
 | 	struct ieee80211_radiotap_header *prthdr = | 
 | 		(struct ieee80211_radiotap_header *)skb->data; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	struct ieee80211_sub_if_data *tmp_sdata, *sdata; | 
 | 	u16 len_rthdr; | 
 | 	int hdrlen; | 
 |  | 
 | 	/* check for not even having the fixed radiotap header part */ | 
 | 	if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) | 
 | 		goto fail; /* too short to be possibly valid */ | 
 |  | 
 | 	/* is it a header version we can trust to find length from? */ | 
 | 	if (unlikely(prthdr->it_version)) | 
 | 		goto fail; /* only version 0 is supported */ | 
 |  | 
 | 	/* then there must be a radiotap header with a length we can use */ | 
 | 	len_rthdr = ieee80211_get_radiotap_len(skb->data); | 
 |  | 
 | 	/* does the skb contain enough to deliver on the alleged length? */ | 
 | 	if (unlikely(skb->len < len_rthdr)) | 
 | 		goto fail; /* skb too short for claimed rt header extent */ | 
 |  | 
 | 	/* | 
 | 	 * fix up the pointers accounting for the radiotap | 
 | 	 * header still being in there.  We are being given | 
 | 	 * a precooked IEEE80211 header so no need for | 
 | 	 * normal processing | 
 | 	 */ | 
 | 	skb_set_mac_header(skb, len_rthdr); | 
 | 	/* | 
 | 	 * these are just fixed to the end of the rt area since we | 
 | 	 * don't have any better information and at this point, nobody cares | 
 | 	 */ | 
 | 	skb_set_network_header(skb, len_rthdr); | 
 | 	skb_set_transport_header(skb, len_rthdr); | 
 |  | 
 | 	if (skb->len < len_rthdr + 2) | 
 | 		goto fail; | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); | 
 | 	hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
 |  | 
 | 	if (skb->len < len_rthdr + hdrlen) | 
 | 		goto fail; | 
 |  | 
 | 	/* | 
 | 	 * Initialize skb->protocol if the injected frame is a data frame | 
 | 	 * carrying a rfc1042 header | 
 | 	 */ | 
 | 	if (ieee80211_is_data(hdr->frame_control) && | 
 | 	    skb->len >= len_rthdr + hdrlen + sizeof(rfc1042_header) + 2) { | 
 | 		u8 *payload = (u8 *)hdr + hdrlen; | 
 |  | 
 | 		if (ether_addr_equal(payload, rfc1042_header)) | 
 | 			skb->protocol = cpu_to_be16((payload[6] << 8) | | 
 | 						    payload[7]); | 
 | 	} | 
 |  | 
 | 	memset(info, 0, sizeof(*info)); | 
 |  | 
 | 	info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS | | 
 | 		      IEEE80211_TX_CTL_INJECTED; | 
 |  | 
 | 	/* process and remove the injection radiotap header */ | 
 | 	if (!ieee80211_parse_tx_radiotap(skb)) | 
 | 		goto fail; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	/* | 
 | 	 * We process outgoing injected frames that have a local address | 
 | 	 * we handle as though they are non-injected frames. | 
 | 	 * This code here isn't entirely correct, the local MAC address | 
 | 	 * isn't always enough to find the interface to use; for proper | 
 | 	 * VLAN/WDS support we will need a different mechanism (which | 
 | 	 * likely isn't going to be monitor interfaces). | 
 | 	 */ | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	list_for_each_entry_rcu(tmp_sdata, &local->interfaces, list) { | 
 | 		if (!ieee80211_sdata_running(tmp_sdata)) | 
 | 			continue; | 
 | 		if (tmp_sdata->vif.type == NL80211_IFTYPE_MONITOR || | 
 | 		    tmp_sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | 
 | 		    tmp_sdata->vif.type == NL80211_IFTYPE_WDS) | 
 | 			continue; | 
 | 		if (ether_addr_equal(tmp_sdata->vif.addr, hdr->addr2)) { | 
 | 			sdata = tmp_sdata; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 	if (!chanctx_conf) { | 
 | 		tmp_sdata = rcu_dereference(local->monitor_sdata); | 
 | 		if (tmp_sdata) | 
 | 			chanctx_conf = | 
 | 				rcu_dereference(tmp_sdata->vif.chanctx_conf); | 
 | 	} | 
 |  | 
 | 	if (chanctx_conf) | 
 | 		chan = chanctx_conf->def.chan; | 
 | 	else if (!local->use_chanctx) | 
 | 		chan = local->_oper_chandef.chan; | 
 | 	else | 
 | 		goto fail_rcu; | 
 |  | 
 | 	/* | 
 | 	 * Frame injection is not allowed if beaconing is not allowed | 
 | 	 * or if we need radar detection. Beaconing is usually not allowed when | 
 | 	 * the mode or operation (Adhoc, AP, Mesh) does not support DFS. | 
 | 	 * Passive scan is also used in world regulatory domains where | 
 | 	 * your country is not known and as such it should be treated as | 
 | 	 * NO TX unless the channel is explicitly allowed in which case | 
 | 	 * your current regulatory domain would not have the passive scan | 
 | 	 * flag. | 
 | 	 * | 
 | 	 * Since AP mode uses monitor interfaces to inject/TX management | 
 | 	 * frames we can make AP mode the exception to this rule once it | 
 | 	 * supports radar detection as its implementation can deal with | 
 | 	 * radar detection by itself. We can do that later by adding a | 
 | 	 * monitor flag interfaces used for AP support. | 
 | 	 */ | 
 | 	if ((chan->flags & (IEEE80211_CHAN_NO_IBSS | IEEE80211_CHAN_RADAR | | 
 | 			    IEEE80211_CHAN_PASSIVE_SCAN))) | 
 | 		goto fail_rcu; | 
 |  | 
 | 	ieee80211_xmit(sdata, skb, chan->band); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 |  | 
 | fail_rcu: | 
 | 	rcu_read_unlock(); | 
 | fail: | 
 | 	dev_kfree_skb(skb); | 
 | 	return NETDEV_TX_OK; /* meaning, we dealt with the skb */ | 
 | } | 
 |  | 
 | /** | 
 |  * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type | 
 |  * subinterfaces (wlan#, WDS, and VLAN interfaces) | 
 |  * @skb: packet to be sent | 
 |  * @dev: incoming interface | 
 |  * | 
 |  * Returns: 0 on success (and frees skb in this case) or 1 on failure (skb will | 
 |  * not be freed, and caller is responsible for either retrying later or freeing | 
 |  * skb). | 
 |  * | 
 |  * This function takes in an Ethernet header and encapsulates it with suitable | 
 |  * IEEE 802.11 header based on which interface the packet is coming in. The | 
 |  * encapsulated packet will then be passed to master interface, wlan#.11, for | 
 |  * transmission (through low-level driver). | 
 |  */ | 
 | netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, | 
 | 				    struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	int head_need; | 
 | 	u16 ethertype, hdrlen,  meshhdrlen = 0; | 
 | 	__le16 fc; | 
 | 	struct ieee80211_hdr hdr; | 
 | 	struct ieee80211s_hdr mesh_hdr __maybe_unused; | 
 | 	struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL; | 
 | 	const u8 *encaps_data; | 
 | 	int encaps_len, skip_header_bytes; | 
 | 	int nh_pos, h_pos; | 
 | 	struct sta_info *sta = NULL; | 
 | 	bool wme_sta = false, authorized = false, tdls_auth = false; | 
 | 	bool tdls_direct = false; | 
 | 	bool multicast; | 
 | 	u32 info_flags = 0; | 
 | 	u16 info_id = 0; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 | 	struct ieee80211_sub_if_data *ap_sdata; | 
 | 	enum ieee80211_band band; | 
 |  | 
 | 	if (unlikely(skb->len < ETH_HLEN)) | 
 | 		goto fail; | 
 |  | 
 | 	/* convert Ethernet header to proper 802.11 header (based on | 
 | 	 * operation mode) */ | 
 | 	ethertype = (skb->data[12] << 8) | skb->data[13]; | 
 | 	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 		sta = rcu_dereference(sdata->u.vlan.sta); | 
 | 		if (sta) { | 
 | 			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
 | 			/* RA TA DA SA */ | 
 | 			memcpy(hdr.addr1, sta->sta.addr, ETH_ALEN); | 
 | 			memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
 | 			memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 			memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 			hdrlen = 30; | 
 | 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | 
 | 			wme_sta = test_sta_flag(sta, WLAN_STA_WME); | 
 | 		} | 
 | 		ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, | 
 | 					u.ap); | 
 | 		chanctx_conf = rcu_dereference(ap_sdata->vif.chanctx_conf); | 
 | 		if (!chanctx_conf) | 
 | 			goto fail_rcu; | 
 | 		band = chanctx_conf->def.chan->band; | 
 | 		if (sta) | 
 | 			break; | 
 | 		/* fall through */ | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		if (sdata->vif.type == NL80211_IFTYPE_AP) | 
 | 			chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 		if (!chanctx_conf) | 
 | 			goto fail_rcu; | 
 | 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | 
 | 		/* DA BSSID SA */ | 
 | 		memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		band = chanctx_conf->def.chan->band; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_WDS: | 
 | 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | 
 | 		/* RA TA DA SA */ | 
 | 		memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		hdrlen = 30; | 
 | 		/* | 
 | 		 * This is the exception! WDS style interfaces are prohibited | 
 | 		 * when channel contexts are in used so this must be valid | 
 | 		 */ | 
 | 		band = local->hw.conf.chandef.chan->band; | 
 | 		break; | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 		if (!is_multicast_ether_addr(skb->data)) { | 
 | 			struct sta_info *next_hop; | 
 | 			bool mpp_lookup = true; | 
 |  | 
 | 			mpath = mesh_path_lookup(sdata, skb->data); | 
 | 			if (mpath) { | 
 | 				mpp_lookup = false; | 
 | 				next_hop = rcu_dereference(mpath->next_hop); | 
 | 				if (!next_hop || | 
 | 				    !(mpath->flags & (MESH_PATH_ACTIVE | | 
 | 						      MESH_PATH_RESOLVING))) | 
 | 					mpp_lookup = true; | 
 | 			} | 
 |  | 
 | 			if (mpp_lookup) | 
 | 				mppath = mpp_path_lookup(sdata, skb->data); | 
 |  | 
 | 			if (mppath && mpath) | 
 | 				mesh_path_del(mpath->sdata, mpath->dst); | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Use address extension if it is a packet from | 
 | 		 * another interface or if we know the destination | 
 | 		 * is being proxied by a portal (i.e. portal address | 
 | 		 * differs from proxied address) | 
 | 		 */ | 
 | 		if (ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN) && | 
 | 		    !(mppath && !ether_addr_equal(mppath->mpp, skb->data))) { | 
 | 			hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, | 
 | 					skb->data, skb->data + ETH_ALEN); | 
 | 			meshhdrlen = ieee80211_new_mesh_header(sdata, &mesh_hdr, | 
 | 							       NULL, NULL); | 
 | 		} else { | 
 | 			/* DS -> MBSS (802.11-2012 13.11.3.3). | 
 | 			 * For unicast with unknown forwarding information, | 
 | 			 * destination might be in the MBSS or if that fails | 
 | 			 * forwarded to another mesh gate. In either case | 
 | 			 * resolution will be handled in ieee80211_xmit(), so | 
 | 			 * leave the original DA. This also works for mcast */ | 
 | 			const u8 *mesh_da = skb->data; | 
 |  | 
 | 			if (mppath) | 
 | 				mesh_da = mppath->mpp; | 
 | 			else if (mpath) | 
 | 				mesh_da = mpath->dst; | 
 |  | 
 | 			hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, | 
 | 					mesh_da, sdata->vif.addr); | 
 | 			if (is_multicast_ether_addr(mesh_da)) | 
 | 				/* DA TA mSA AE:SA */ | 
 | 				meshhdrlen = ieee80211_new_mesh_header( | 
 | 						sdata, &mesh_hdr, | 
 | 						skb->data + ETH_ALEN, NULL); | 
 | 			else | 
 | 				/* RA TA mDA mSA AE:DA SA */ | 
 | 				meshhdrlen = ieee80211_new_mesh_header( | 
 | 						sdata, &mesh_hdr, skb->data, | 
 | 						skb->data + ETH_ALEN); | 
 |  | 
 | 		} | 
 | 		chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 		if (!chanctx_conf) | 
 | 			goto fail_rcu; | 
 | 		band = chanctx_conf->def.chan->band; | 
 | 		break; | 
 | #endif | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { | 
 | 			bool tdls_peer = false; | 
 |  | 
 | 			sta = sta_info_get(sdata, skb->data); | 
 | 			if (sta) { | 
 | 				authorized = test_sta_flag(sta, | 
 | 							WLAN_STA_AUTHORIZED); | 
 | 				wme_sta = test_sta_flag(sta, WLAN_STA_WME); | 
 | 				tdls_peer = test_sta_flag(sta, | 
 | 							 WLAN_STA_TDLS_PEER); | 
 | 				tdls_auth = test_sta_flag(sta, | 
 | 						WLAN_STA_TDLS_PEER_AUTH); | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * If the TDLS link is enabled, send everything | 
 | 			 * directly. Otherwise, allow TDLS setup frames | 
 | 			 * to be transmitted indirectly. | 
 | 			 */ | 
 | 			tdls_direct = tdls_peer && (tdls_auth || | 
 | 				 !(ethertype == ETH_P_TDLS && skb->len > 14 && | 
 | 				   skb->data[14] == WLAN_TDLS_SNAP_RFTYPE)); | 
 | 		} | 
 |  | 
 | 		if (tdls_direct) { | 
 | 			/* link during setup - throw out frames to peer */ | 
 | 			if (!tdls_auth) | 
 | 				goto fail_rcu; | 
 |  | 
 | 			/* DA SA BSSID */ | 
 | 			memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 			memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 			memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN); | 
 | 			hdrlen = 24; | 
 | 		}  else if (sdata->u.mgd.use_4addr && | 
 | 			    cpu_to_be16(ethertype) != sdata->control_port_protocol) { | 
 | 			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | 
 | 					  IEEE80211_FCTL_TODS); | 
 | 			/* RA TA DA SA */ | 
 | 			memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); | 
 | 			memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | 
 | 			memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 			memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 			hdrlen = 30; | 
 | 		} else { | 
 | 			fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | 
 | 			/* BSSID SA DA */ | 
 | 			memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); | 
 | 			memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 			memcpy(hdr.addr3, skb->data, ETH_ALEN); | 
 | 			hdrlen = 24; | 
 | 		} | 
 | 		chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 		if (!chanctx_conf) | 
 | 			goto fail_rcu; | 
 | 		band = chanctx_conf->def.chan->band; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		/* DA SA BSSID */ | 
 | 		memcpy(hdr.addr1, skb->data, ETH_ALEN); | 
 | 		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | 
 | 		memcpy(hdr.addr3, sdata->u.ibss.bssid, ETH_ALEN); | 
 | 		hdrlen = 24; | 
 | 		chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 		if (!chanctx_conf) | 
 | 			goto fail_rcu; | 
 | 		band = chanctx_conf->def.chan->band; | 
 | 		break; | 
 | 	default: | 
 | 		goto fail_rcu; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * There's no need to try to look up the destination | 
 | 	 * if it is a multicast address (which can only happen | 
 | 	 * in AP mode) | 
 | 	 */ | 
 | 	multicast = is_multicast_ether_addr(hdr.addr1); | 
 | 	if (!multicast) { | 
 | 		sta = sta_info_get(sdata, hdr.addr1); | 
 | 		if (sta) { | 
 | 			authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | 
 | 			wme_sta = test_sta_flag(sta, WLAN_STA_WME); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* For mesh, the use of the QoS header is mandatory */ | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		wme_sta = true; | 
 |  | 
 | 	/* receiver and we are QoS enabled, use a QoS type frame */ | 
 | 	if (wme_sta && local->hw.queues >= IEEE80211_NUM_ACS) { | 
 | 		fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
 | 		hdrlen += 2; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Drop unicast frames to unauthorised stations unless they are | 
 | 	 * EAPOL frames from the local station. | 
 | 	 */ | 
 | 	if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 		     !is_multicast_ether_addr(hdr.addr1) && !authorized && | 
 | 		     (cpu_to_be16(ethertype) != sdata->control_port_protocol || | 
 | 		      !ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) { | 
 | #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | 
 | 		net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n", | 
 | 				    dev->name, hdr.addr1); | 
 | #endif | 
 |  | 
 | 		I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); | 
 |  | 
 | 		goto fail_rcu; | 
 | 	} | 
 |  | 
 | 	if (unlikely(!multicast && skb->sk && | 
 | 		     skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS)) { | 
 | 		struct sk_buff *orig_skb = skb; | 
 |  | 
 | 		skb = skb_clone(skb, GFP_ATOMIC); | 
 | 		if (skb) { | 
 | 			unsigned long flags; | 
 | 			int id; | 
 |  | 
 | 			spin_lock_irqsave(&local->ack_status_lock, flags); | 
 | 			id = idr_alloc(&local->ack_status_frames, orig_skb, | 
 | 				       1, 0x10000, GFP_ATOMIC); | 
 | 			spin_unlock_irqrestore(&local->ack_status_lock, flags); | 
 |  | 
 | 			if (id >= 0) { | 
 | 				info_id = id; | 
 | 				info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 | 			} else if (skb_shared(skb)) { | 
 | 				kfree_skb(orig_skb); | 
 | 			} else { | 
 | 				kfree_skb(skb); | 
 | 				skb = orig_skb; | 
 | 			} | 
 | 		} else { | 
 | 			/* couldn't clone -- lose tx status ... */ | 
 | 			skb = orig_skb; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If the skb is shared we need to obtain our own copy. | 
 | 	 */ | 
 | 	if (skb_shared(skb)) { | 
 | 		struct sk_buff *tmp_skb = skb; | 
 |  | 
 | 		/* can't happen -- skb is a clone if info_id != 0 */ | 
 | 		WARN_ON(info_id); | 
 |  | 
 | 		skb = skb_clone(skb, GFP_ATOMIC); | 
 | 		kfree_skb(tmp_skb); | 
 |  | 
 | 		if (!skb) | 
 | 			goto fail_rcu; | 
 | 	} | 
 |  | 
 | 	hdr.frame_control = fc; | 
 | 	hdr.duration_id = 0; | 
 | 	hdr.seq_ctrl = 0; | 
 |  | 
 | 	skip_header_bytes = ETH_HLEN; | 
 | 	if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | 
 | 		encaps_data = bridge_tunnel_header; | 
 | 		encaps_len = sizeof(bridge_tunnel_header); | 
 | 		skip_header_bytes -= 2; | 
 | 	} else if (ethertype >= ETH_P_802_3_MIN) { | 
 | 		encaps_data = rfc1042_header; | 
 | 		encaps_len = sizeof(rfc1042_header); | 
 | 		skip_header_bytes -= 2; | 
 | 	} else { | 
 | 		encaps_data = NULL; | 
 | 		encaps_len = 0; | 
 | 	} | 
 |  | 
 | 	nh_pos = skb_network_header(skb) - skb->data; | 
 | 	h_pos = skb_transport_header(skb) - skb->data; | 
 |  | 
 | 	skb_pull(skb, skip_header_bytes); | 
 | 	nh_pos -= skip_header_bytes; | 
 | 	h_pos -= skip_header_bytes; | 
 |  | 
 | 	head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb); | 
 |  | 
 | 	/* | 
 | 	 * So we need to modify the skb header and hence need a copy of | 
 | 	 * that. The head_need variable above doesn't, so far, include | 
 | 	 * the needed header space that we don't need right away. If we | 
 | 	 * can, then we don't reallocate right now but only after the | 
 | 	 * frame arrives at the master device (if it does...) | 
 | 	 * | 
 | 	 * If we cannot, however, then we will reallocate to include all | 
 | 	 * the ever needed space. Also, if we need to reallocate it anyway, | 
 | 	 * make it big enough for everything we may ever need. | 
 | 	 */ | 
 |  | 
 | 	if (head_need > 0 || skb_cloned(skb)) { | 
 | 		head_need += IEEE80211_ENCRYPT_HEADROOM; | 
 | 		head_need += local->tx_headroom; | 
 | 		head_need = max_t(int, 0, head_need); | 
 | 		if (ieee80211_skb_resize(sdata, skb, head_need, true)) { | 
 | 			ieee80211_free_txskb(&local->hw, skb); | 
 | 			skb = NULL; | 
 | 			goto fail_rcu; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (encaps_data) { | 
 | 		memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | 
 | 		nh_pos += encaps_len; | 
 | 		h_pos += encaps_len; | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	if (meshhdrlen > 0) { | 
 | 		memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); | 
 | 		nh_pos += meshhdrlen; | 
 | 		h_pos += meshhdrlen; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (ieee80211_is_data_qos(fc)) { | 
 | 		__le16 *qos_control; | 
 |  | 
 | 		qos_control = (__le16*) skb_push(skb, 2); | 
 | 		memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); | 
 | 		/* | 
 | 		 * Maybe we could actually set some fields here, for now just | 
 | 		 * initialise to zero to indicate no special operation. | 
 | 		 */ | 
 | 		*qos_control = 0; | 
 | 	} else | 
 | 		memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | 
 |  | 
 | 	nh_pos += hdrlen; | 
 | 	h_pos += hdrlen; | 
 |  | 
 | 	dev->stats.tx_packets++; | 
 | 	dev->stats.tx_bytes += skb->len; | 
 |  | 
 | 	/* Update skb pointers to various headers since this modified frame | 
 | 	 * is going to go through Linux networking code that may potentially | 
 | 	 * need things like pointer to IP header. */ | 
 | 	skb_set_mac_header(skb, 0); | 
 | 	skb_set_network_header(skb, nh_pos); | 
 | 	skb_set_transport_header(skb, h_pos); | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 | 	memset(info, 0, sizeof(*info)); | 
 |  | 
 | 	dev->trans_start = jiffies; | 
 |  | 
 | 	info->flags = info_flags; | 
 | 	info->ack_frame_id = info_id; | 
 |  | 
 | 	ieee80211_xmit(sdata, skb, band); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 |  | 
 |  fail_rcu: | 
 | 	rcu_read_unlock(); | 
 |  fail: | 
 | 	dev_kfree_skb(skb); | 
 | 	return NETDEV_TX_OK; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * ieee80211_clear_tx_pending may not be called in a context where | 
 |  * it is possible that it packets could come in again. | 
 |  */ | 
 | void ieee80211_clear_tx_pending(struct ieee80211_local *local) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < local->hw.queues; i++) { | 
 | 		while ((skb = skb_dequeue(&local->pending[i])) != NULL) | 
 | 			ieee80211_free_txskb(&local->hw, skb); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Returns false if the frame couldn't be transmitted but was queued instead, | 
 |  * which in this case means re-queued -- take as an indication to stop sending | 
 |  * more pending frames. | 
 |  */ | 
 | static bool ieee80211_tx_pending_skb(struct ieee80211_local *local, | 
 | 				     struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct sta_info *sta; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	bool result; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 	sdata = vif_to_sdata(info->control.vif); | 
 |  | 
 | 	if (info->flags & IEEE80211_TX_INTFL_NEED_TXPROCESSING) { | 
 | 		chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 		if (unlikely(!chanctx_conf)) { | 
 | 			dev_kfree_skb(skb); | 
 | 			return true; | 
 | 		} | 
 | 		result = ieee80211_tx(sdata, skb, true, | 
 | 				      chanctx_conf->def.chan->band); | 
 | 	} else { | 
 | 		struct sk_buff_head skbs; | 
 |  | 
 | 		__skb_queue_head_init(&skbs); | 
 | 		__skb_queue_tail(&skbs, skb); | 
 |  | 
 | 		hdr = (struct ieee80211_hdr *)skb->data; | 
 | 		sta = sta_info_get(sdata, hdr->addr1); | 
 |  | 
 | 		result = __ieee80211_tx(local, &skbs, skb->len, sta, true); | 
 | 	} | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | /* | 
 |  * Transmit all pending packets. Called from tasklet. | 
 |  */ | 
 | void ieee80211_tx_pending(unsigned long data) | 
 | { | 
 | 	struct ieee80211_local *local = (struct ieee80211_local *)data; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 | 	bool txok; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
 | 	for (i = 0; i < local->hw.queues; i++) { | 
 | 		/* | 
 | 		 * If queue is stopped by something other than due to pending | 
 | 		 * frames, or we have no pending frames, proceed to next queue. | 
 | 		 */ | 
 | 		if (local->queue_stop_reasons[i] || | 
 | 		    skb_queue_empty(&local->pending[i])) | 
 | 			continue; | 
 |  | 
 | 		while (!skb_queue_empty(&local->pending[i])) { | 
 | 			struct sk_buff *skb = __skb_dequeue(&local->pending[i]); | 
 | 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 			if (WARN_ON(!info->control.vif)) { | 
 | 				ieee80211_free_txskb(&local->hw, skb); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			spin_unlock_irqrestore(&local->queue_stop_reason_lock, | 
 | 						flags); | 
 |  | 
 | 			txok = ieee80211_tx_pending_skb(local, skb); | 
 | 			spin_lock_irqsave(&local->queue_stop_reason_lock, | 
 | 					  flags); | 
 | 			if (!txok) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		if (skb_queue_empty(&local->pending[i])) | 
 | 			ieee80211_propagate_queue_wake(local, i); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
 |  | 
 | 	rcu_read_unlock(); | 
 | } | 
 |  | 
 | /* functions for drivers to get certain frames */ | 
 |  | 
 | static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, | 
 | 				       struct ps_data *ps, struct sk_buff *skb) | 
 | { | 
 | 	u8 *pos, *tim; | 
 | 	int aid0 = 0; | 
 | 	int i, have_bits = 0, n1, n2; | 
 |  | 
 | 	/* Generate bitmap for TIM only if there are any STAs in power save | 
 | 	 * mode. */ | 
 | 	if (atomic_read(&ps->num_sta_ps) > 0) | 
 | 		/* in the hope that this is faster than | 
 | 		 * checking byte-for-byte */ | 
 | 		have_bits = !bitmap_empty((unsigned long*)ps->tim, | 
 | 					  IEEE80211_MAX_AID+1); | 
 |  | 
 | 	if (ps->dtim_count == 0) | 
 | 		ps->dtim_count = sdata->vif.bss_conf.dtim_period - 1; | 
 | 	else | 
 | 		ps->dtim_count--; | 
 |  | 
 | 	tim = pos = (u8 *) skb_put(skb, 6); | 
 | 	*pos++ = WLAN_EID_TIM; | 
 | 	*pos++ = 4; | 
 | 	*pos++ = ps->dtim_count; | 
 | 	*pos++ = sdata->vif.bss_conf.dtim_period; | 
 |  | 
 | 	if (ps->dtim_count == 0 && !skb_queue_empty(&ps->bc_buf)) | 
 | 		aid0 = 1; | 
 |  | 
 | 	ps->dtim_bc_mc = aid0 == 1; | 
 |  | 
 | 	if (have_bits) { | 
 | 		/* Find largest even number N1 so that bits numbered 1 through | 
 | 		 * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits | 
 | 		 * (N2 + 1) x 8 through 2007 are 0. */ | 
 | 		n1 = 0; | 
 | 		for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { | 
 | 			if (ps->tim[i]) { | 
 | 				n1 = i & 0xfe; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		n2 = n1; | 
 | 		for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { | 
 | 			if (ps->tim[i]) { | 
 | 				n2 = i; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Bitmap control */ | 
 | 		*pos++ = n1 | aid0; | 
 | 		/* Part Virt Bitmap */ | 
 | 		skb_put(skb, n2 - n1); | 
 | 		memcpy(pos, ps->tim + n1, n2 - n1 + 1); | 
 |  | 
 | 		tim[1] = n2 - n1 + 4; | 
 | 	} else { | 
 | 		*pos++ = aid0; /* Bitmap control */ | 
 | 		*pos++ = 0; /* Part Virt Bitmap */ | 
 | 	} | 
 | } | 
 |  | 
 | static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, | 
 | 				    struct ps_data *ps, struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	/* | 
 | 	 * Not very nice, but we want to allow the driver to call | 
 | 	 * ieee80211_beacon_get() as a response to the set_tim() | 
 | 	 * callback. That, however, is already invoked under the | 
 | 	 * sta_lock to guarantee consistent and race-free update | 
 | 	 * of the tim bitmap in mac80211 and the driver. | 
 | 	 */ | 
 | 	if (local->tim_in_locked_section) { | 
 | 		__ieee80211_beacon_add_tim(sdata, ps, skb); | 
 | 	} else { | 
 | 		spin_lock_bh(&local->tim_lock); | 
 | 		__ieee80211_beacon_add_tim(sdata, ps, skb); | 
 | 		spin_unlock_bh(&local->tim_lock); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, | 
 | 					 struct ieee80211_vif *vif, | 
 | 					 u16 *tim_offset, u16 *tim_length) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct sk_buff *skb = NULL; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct ieee80211_sub_if_data *sdata = NULL; | 
 | 	enum ieee80211_band band; | 
 | 	struct ieee80211_tx_rate_control txrc; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	sdata = vif_to_sdata(vif); | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 |  | 
 | 	if (!ieee80211_sdata_running(sdata) || !chanctx_conf) | 
 | 		goto out; | 
 |  | 
 | 	if (tim_offset) | 
 | 		*tim_offset = 0; | 
 | 	if (tim_length) | 
 | 		*tim_length = 0; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
 | 		struct ieee80211_if_ap *ap = &sdata->u.ap; | 
 | 		struct beacon_data *beacon = rcu_dereference(ap->beacon); | 
 |  | 
 | 		if (beacon) { | 
 | 			/* | 
 | 			 * headroom, head length, | 
 | 			 * tail length and maximum TIM length | 
 | 			 */ | 
 | 			skb = dev_alloc_skb(local->tx_headroom + | 
 | 					    beacon->head_len + | 
 | 					    beacon->tail_len + 256); | 
 | 			if (!skb) | 
 | 				goto out; | 
 |  | 
 | 			skb_reserve(skb, local->tx_headroom); | 
 | 			memcpy(skb_put(skb, beacon->head_len), beacon->head, | 
 | 			       beacon->head_len); | 
 |  | 
 | 			ieee80211_beacon_add_tim(sdata, &ap->ps, skb); | 
 |  | 
 | 			if (tim_offset) | 
 | 				*tim_offset = beacon->head_len; | 
 | 			if (tim_length) | 
 | 				*tim_length = skb->len - beacon->head_len; | 
 |  | 
 | 			if (beacon->tail) | 
 | 				memcpy(skb_put(skb, beacon->tail_len), | 
 | 				       beacon->tail, beacon->tail_len); | 
 | 		} else | 
 | 			goto out; | 
 | 	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
 | 		struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; | 
 | 		struct ieee80211_hdr *hdr; | 
 | 		struct beacon_data *presp = rcu_dereference(ifibss->presp); | 
 |  | 
 | 		if (!presp) | 
 | 			goto out; | 
 |  | 
 | 		skb = dev_alloc_skb(local->tx_headroom + presp->head_len); | 
 | 		if (!skb) | 
 | 			goto out; | 
 | 		skb_reserve(skb, local->tx_headroom); | 
 | 		memcpy(skb_put(skb, presp->head_len), presp->head, | 
 | 		       presp->head_len); | 
 |  | 
 | 		hdr = (struct ieee80211_hdr *) skb->data; | 
 | 		hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 						 IEEE80211_STYPE_BEACON); | 
 | 	} else if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
 | 		struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 		struct beacon_data *bcn = rcu_dereference(ifmsh->beacon); | 
 |  | 
 | 		if (!bcn) | 
 | 			goto out; | 
 |  | 
 | 		if (ifmsh->sync_ops) | 
 | 			ifmsh->sync_ops->adjust_tbtt( | 
 | 						sdata); | 
 |  | 
 | 		skb = dev_alloc_skb(local->tx_headroom + | 
 | 				    bcn->head_len + | 
 | 				    256 + /* TIM IE */ | 
 | 				    bcn->tail_len); | 
 | 		if (!skb) | 
 | 			goto out; | 
 | 		skb_reserve(skb, local->tx_headroom); | 
 | 		memcpy(skb_put(skb, bcn->head_len), bcn->head, bcn->head_len); | 
 | 		ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb); | 
 | 		memcpy(skb_put(skb, bcn->tail_len), bcn->tail, bcn->tail_len); | 
 | 	} else { | 
 | 		WARN_ON(1); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	band = chanctx_conf->def.chan->band; | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | 
 | 	info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
 | 	info->band = band; | 
 |  | 
 | 	memset(&txrc, 0, sizeof(txrc)); | 
 | 	txrc.hw = hw; | 
 | 	txrc.sband = local->hw.wiphy->bands[band]; | 
 | 	txrc.bss_conf = &sdata->vif.bss_conf; | 
 | 	txrc.skb = skb; | 
 | 	txrc.reported_rate.idx = -1; | 
 | 	txrc.rate_idx_mask = sdata->rc_rateidx_mask[band]; | 
 | 	if (txrc.rate_idx_mask == (1 << txrc.sband->n_bitrates) - 1) | 
 | 		txrc.max_rate_idx = -1; | 
 | 	else | 
 | 		txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; | 
 | 	txrc.bss = true; | 
 | 	rate_control_get_rate(sdata, NULL, &txrc); | 
 |  | 
 | 	info->control.vif = vif; | 
 |  | 
 | 	info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT | | 
 | 			IEEE80211_TX_CTL_ASSIGN_SEQ | | 
 | 			IEEE80211_TX_CTL_FIRST_FRAGMENT; | 
 |  out: | 
 | 	rcu_read_unlock(); | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_beacon_get_tim); | 
 |  | 
 | struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, | 
 | 					struct ieee80211_vif *vif) | 
 | { | 
 | 	struct ieee80211_if_ap *ap = NULL; | 
 | 	struct sk_buff *skb = NULL; | 
 | 	struct probe_resp *presp = NULL; | 
 | 	struct ieee80211_hdr *hdr; | 
 | 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_AP) | 
 | 		return NULL; | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	ap = &sdata->u.ap; | 
 | 	presp = rcu_dereference(ap->probe_resp); | 
 | 	if (!presp) | 
 | 		goto out; | 
 |  | 
 | 	skb = dev_alloc_skb(presp->len); | 
 | 	if (!skb) | 
 | 		goto out; | 
 |  | 
 | 	memcpy(skb_put(skb, presp->len), presp->data, presp->len); | 
 |  | 
 | 	hdr = (struct ieee80211_hdr *) skb->data; | 
 | 	memset(hdr->addr1, 0, sizeof(hdr->addr1)); | 
 |  | 
 | out: | 
 | 	rcu_read_unlock(); | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_proberesp_get); | 
 |  | 
 | struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, | 
 | 				     struct ieee80211_vif *vif) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_if_managed *ifmgd; | 
 | 	struct ieee80211_pspoll *pspoll; | 
 | 	struct ieee80211_local *local; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) | 
 | 		return NULL; | 
 |  | 
 | 	sdata = vif_to_sdata(vif); | 
 | 	ifmgd = &sdata->u.mgd; | 
 | 	local = sdata->local; | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*pspoll)); | 
 | 	if (!skb) | 
 | 		return NULL; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	pspoll = (struct ieee80211_pspoll *) skb_put(skb, sizeof(*pspoll)); | 
 | 	memset(pspoll, 0, sizeof(*pspoll)); | 
 | 	pspoll->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL | | 
 | 					    IEEE80211_STYPE_PSPOLL); | 
 | 	pspoll->aid = cpu_to_le16(ifmgd->aid); | 
 |  | 
 | 	/* aid in PS-Poll has its two MSBs each set to 1 */ | 
 | 	pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14); | 
 |  | 
 | 	memcpy(pspoll->bssid, ifmgd->bssid, ETH_ALEN); | 
 | 	memcpy(pspoll->ta, vif->addr, ETH_ALEN); | 
 |  | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_pspoll_get); | 
 |  | 
 | struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, | 
 | 				       struct ieee80211_vif *vif) | 
 | { | 
 | 	struct ieee80211_hdr_3addr *nullfunc; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_if_managed *ifmgd; | 
 | 	struct ieee80211_local *local; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) | 
 | 		return NULL; | 
 |  | 
 | 	sdata = vif_to_sdata(vif); | 
 | 	ifmgd = &sdata->u.mgd; | 
 | 	local = sdata->local; | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*nullfunc)); | 
 | 	if (!skb) | 
 | 		return NULL; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	nullfunc = (struct ieee80211_hdr_3addr *) skb_put(skb, | 
 | 							  sizeof(*nullfunc)); | 
 | 	memset(nullfunc, 0, sizeof(*nullfunc)); | 
 | 	nullfunc->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 					      IEEE80211_STYPE_NULLFUNC | | 
 | 					      IEEE80211_FCTL_TODS); | 
 | 	memcpy(nullfunc->addr1, ifmgd->bssid, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr2, vif->addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr3, ifmgd->bssid, ETH_ALEN); | 
 |  | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_nullfunc_get); | 
 |  | 
 | struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, | 
 | 				       struct ieee80211_vif *vif, | 
 | 				       const u8 *ssid, size_t ssid_len, | 
 | 				       size_t tailroom) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_local *local; | 
 | 	struct ieee80211_hdr_3addr *hdr; | 
 | 	struct sk_buff *skb; | 
 | 	size_t ie_ssid_len; | 
 | 	u8 *pos; | 
 |  | 
 | 	sdata = vif_to_sdata(vif); | 
 | 	local = sdata->local; | 
 | 	ie_ssid_len = 2 + ssid_len; | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*hdr) + | 
 | 			    ie_ssid_len + tailroom); | 
 | 	if (!skb) | 
 | 		return NULL; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	hdr = (struct ieee80211_hdr_3addr *) skb_put(skb, sizeof(*hdr)); | 
 | 	memset(hdr, 0, sizeof(*hdr)); | 
 | 	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | 
 | 					 IEEE80211_STYPE_PROBE_REQ); | 
 | 	eth_broadcast_addr(hdr->addr1); | 
 | 	memcpy(hdr->addr2, vif->addr, ETH_ALEN); | 
 | 	eth_broadcast_addr(hdr->addr3); | 
 |  | 
 | 	pos = skb_put(skb, ie_ssid_len); | 
 | 	*pos++ = WLAN_EID_SSID; | 
 | 	*pos++ = ssid_len; | 
 | 	if (ssid_len) | 
 | 		memcpy(pos, ssid, ssid_len); | 
 | 	pos += ssid_len; | 
 |  | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_probereq_get); | 
 |  | 
 | void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | 
 | 		       const void *frame, size_t frame_len, | 
 | 		       const struct ieee80211_tx_info *frame_txctl, | 
 | 		       struct ieee80211_rts *rts) | 
 | { | 
 | 	const struct ieee80211_hdr *hdr = frame; | 
 |  | 
 | 	rts->frame_control = | 
 | 	    cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); | 
 | 	rts->duration = ieee80211_rts_duration(hw, vif, frame_len, | 
 | 					       frame_txctl); | 
 | 	memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); | 
 | 	memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_rts_get); | 
 |  | 
 | void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | 
 | 			     const void *frame, size_t frame_len, | 
 | 			     const struct ieee80211_tx_info *frame_txctl, | 
 | 			     struct ieee80211_cts *cts) | 
 | { | 
 | 	const struct ieee80211_hdr *hdr = frame; | 
 |  | 
 | 	cts->frame_control = | 
 | 	    cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); | 
 | 	cts->duration = ieee80211_ctstoself_duration(hw, vif, | 
 | 						     frame_len, frame_txctl); | 
 | 	memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_ctstoself_get); | 
 |  | 
 | struct sk_buff * | 
 | ieee80211_get_buffered_bc(struct ieee80211_hw *hw, | 
 | 			  struct ieee80211_vif *vif) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct sk_buff *skb = NULL; | 
 | 	struct ieee80211_tx_data tx; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ps_data *ps; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 	sdata = vif_to_sdata(vif); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 |  | 
 | 	if (!chanctx_conf) | 
 | 		goto out; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
 | 		struct beacon_data *beacon = | 
 | 				rcu_dereference(sdata->u.ap.beacon); | 
 |  | 
 | 		if (!beacon || !beacon->head) | 
 | 			goto out; | 
 |  | 
 | 		ps = &sdata->u.ap.ps; | 
 | 	} else if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
 | 		ps = &sdata->u.mesh.ps; | 
 | 	} else { | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (ps->dtim_count != 0 || !ps->dtim_bc_mc) | 
 | 		goto out; /* send buffered bc/mc only after DTIM beacon */ | 
 |  | 
 | 	while (1) { | 
 | 		skb = skb_dequeue(&ps->bc_buf); | 
 | 		if (!skb) | 
 | 			goto out; | 
 | 		local->total_ps_buffered--; | 
 |  | 
 | 		if (!skb_queue_empty(&ps->bc_buf) && skb->len >= 2) { | 
 | 			struct ieee80211_hdr *hdr = | 
 | 				(struct ieee80211_hdr *) skb->data; | 
 | 			/* more buffered multicast/broadcast frames ==> set | 
 | 			 * MoreData flag in IEEE 802.11 header to inform PS | 
 | 			 * STAs */ | 
 | 			hdr->frame_control |= | 
 | 				cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
 | 		} | 
 |  | 
 | 		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 			sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); | 
 | 		if (!ieee80211_tx_prepare(sdata, &tx, skb)) | 
 | 			break; | 
 | 		dev_kfree_skb_any(skb); | 
 | 	} | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	tx.flags |= IEEE80211_TX_PS_BUFFERED; | 
 | 	info->band = chanctx_conf->def.chan->band; | 
 |  | 
 | 	if (invoke_tx_handlers(&tx)) | 
 | 		skb = NULL; | 
 |  out: | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return skb; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_get_buffered_bc); | 
 |  | 
 | void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, | 
 | 				 struct sk_buff *skb, int tid, | 
 | 				 enum ieee80211_band band) | 
 | { | 
 | 	int ac = ieee802_1d_to_ac[tid & 7]; | 
 |  | 
 | 	skb_set_mac_header(skb, 0); | 
 | 	skb_set_network_header(skb, 0); | 
 | 	skb_set_transport_header(skb, 0); | 
 |  | 
 | 	skb_set_queue_mapping(skb, ac); | 
 | 	skb->priority = tid; | 
 |  | 
 | 	skb->dev = sdata->dev; | 
 |  | 
 | 	/* | 
 | 	 * The other path calling ieee80211_xmit is from the tasklet, | 
 | 	 * and while we can handle concurrent transmissions locking | 
 | 	 * requirements are that we do not come into tx with bhs on. | 
 | 	 */ | 
 | 	local_bh_disable(); | 
 | 	ieee80211_xmit(sdata, skb, band); | 
 | 	local_bh_enable(); | 
 | } |