| /* |
| * AHCI SATA platform library |
| * |
| * Copyright 2004-2005 Red Hat, Inc. |
| * Jeff Garzik <jgarzik@pobox.com> |
| * Copyright 2010 MontaVista Software, LLC. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/kernel.h> |
| #include <linux/gfp.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/libata.h> |
| #include <linux/ahci_platform.h> |
| #include <linux/phy/phy.h> |
| #include <linux/pm_runtime.h> |
| #include "ahci.h" |
| |
| static void ahci_host_stop(struct ata_host *host); |
| |
| struct ata_port_operations ahci_platform_ops = { |
| .inherits = &ahci_ops, |
| .host_stop = ahci_host_stop, |
| }; |
| EXPORT_SYMBOL_GPL(ahci_platform_ops); |
| |
| static struct scsi_host_template ahci_platform_sht = { |
| AHCI_SHT("ahci_platform"), |
| }; |
| |
| /** |
| * ahci_platform_enable_clks - Enable platform clocks |
| * @hpriv: host private area to store config values |
| * |
| * This function enables all the clks found in hpriv->clks, starting at |
| * index 0. If any clk fails to enable it disables all the clks already |
| * enabled in reverse order, and then returns an error. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) |
| { |
| int c, rc; |
| |
| for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { |
| rc = clk_prepare_enable(hpriv->clks[c]); |
| if (rc) |
| goto disable_unprepare_clk; |
| } |
| return 0; |
| |
| disable_unprepare_clk: |
| while (--c >= 0) |
| clk_disable_unprepare(hpriv->clks[c]); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); |
| |
| /** |
| * ahci_platform_disable_clks - Disable platform clocks |
| * @hpriv: host private area to store config values |
| * |
| * This function disables all the clks found in hpriv->clks, in reverse |
| * order of ahci_platform_enable_clks (starting at the end of the array). |
| */ |
| void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) |
| { |
| int c; |
| |
| for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) |
| if (hpriv->clks[c]) |
| clk_disable_unprepare(hpriv->clks[c]); |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); |
| |
| /** |
| * ahci_platform_enable_resources - Enable platform resources |
| * @hpriv: host private area to store config values |
| * |
| * This function enables all ahci_platform managed resources in the |
| * following order: |
| * 1) Regulator |
| * 2) Clocks (through ahci_platform_enable_clks) |
| * 3) Phy |
| * |
| * If resource enabling fails at any point the previous enabled resources |
| * are disabled in reverse order. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) |
| { |
| int rc; |
| |
| if (hpriv->target_pwr) { |
| rc = regulator_enable(hpriv->target_pwr); |
| if (rc) |
| return rc; |
| } |
| |
| rc = ahci_platform_enable_clks(hpriv); |
| if (rc) |
| goto disable_regulator; |
| |
| if (hpriv->phy) { |
| rc = phy_init(hpriv->phy); |
| if (rc) |
| goto disable_clks; |
| |
| rc = phy_power_on(hpriv->phy); |
| if (rc) { |
| phy_exit(hpriv->phy); |
| goto disable_clks; |
| } |
| } |
| |
| return 0; |
| |
| disable_clks: |
| ahci_platform_disable_clks(hpriv); |
| |
| disable_regulator: |
| if (hpriv->target_pwr) |
| regulator_disable(hpriv->target_pwr); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_enable_resources); |
| |
| /** |
| * ahci_platform_disable_resources - Disable platform resources |
| * @hpriv: host private area to store config values |
| * |
| * This function disables all ahci_platform managed resources in the |
| * following order: |
| * 1) Phy |
| * 2) Clocks (through ahci_platform_disable_clks) |
| * 3) Regulator |
| */ |
| void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) |
| { |
| if (hpriv->phy) { |
| phy_power_off(hpriv->phy); |
| phy_exit(hpriv->phy); |
| } |
| |
| ahci_platform_disable_clks(hpriv); |
| |
| if (hpriv->target_pwr) |
| regulator_disable(hpriv->target_pwr); |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); |
| |
| static void ahci_platform_put_resources(struct device *dev, void *res) |
| { |
| struct ahci_host_priv *hpriv = res; |
| int c; |
| |
| if (hpriv->got_runtime_pm) { |
| pm_runtime_put_sync(dev); |
| pm_runtime_disable(dev); |
| } |
| |
| for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) |
| clk_put(hpriv->clks[c]); |
| } |
| |
| /** |
| * ahci_platform_get_resources - Get platform resources |
| * @pdev: platform device to get resources for |
| * |
| * This function allocates an ahci_host_priv struct, and gets the following |
| * resources, storing a reference to them inside the returned struct: |
| * |
| * 1) mmio registers (IORESOURCE_MEM 0, mandatory) |
| * 2) regulator for controlling the targets power (optional) |
| * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, |
| * or for non devicetree enabled platforms a single clock |
| * 4) phy (optional) |
| * |
| * RETURNS: |
| * The allocated ahci_host_priv on success, otherwise an ERR_PTR value |
| */ |
| struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ahci_host_priv *hpriv; |
| struct clk *clk; |
| int i, rc = -ENOMEM; |
| |
| if (!devres_open_group(dev, NULL, GFP_KERNEL)) |
| return ERR_PTR(-ENOMEM); |
| |
| hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv), |
| GFP_KERNEL); |
| if (!hpriv) |
| goto err_out; |
| |
| devres_add(dev, hpriv); |
| |
| hpriv->mmio = devm_ioremap_resource(dev, |
| platform_get_resource(pdev, IORESOURCE_MEM, 0)); |
| if (IS_ERR(hpriv->mmio)) { |
| dev_err(dev, "no mmio space\n"); |
| rc = PTR_ERR(hpriv->mmio); |
| goto err_out; |
| } |
| |
| hpriv->target_pwr = devm_regulator_get_optional(dev, "target"); |
| if (IS_ERR(hpriv->target_pwr)) { |
| rc = PTR_ERR(hpriv->target_pwr); |
| if (rc == -EPROBE_DEFER) |
| goto err_out; |
| hpriv->target_pwr = NULL; |
| } |
| |
| for (i = 0; i < AHCI_MAX_CLKS; i++) { |
| /* |
| * For now we must use clk_get(dev, NULL) for the first clock, |
| * because some platforms (da850, spear13xx) are not yet |
| * converted to use devicetree for clocks. For new platforms |
| * this is equivalent to of_clk_get(dev->of_node, 0). |
| */ |
| if (i == 0) |
| clk = clk_get(dev, NULL); |
| else |
| clk = of_clk_get(dev->of_node, i); |
| |
| if (IS_ERR(clk)) { |
| rc = PTR_ERR(clk); |
| if (rc == -EPROBE_DEFER) |
| goto err_out; |
| break; |
| } |
| hpriv->clks[i] = clk; |
| } |
| |
| hpriv->phy = devm_phy_get(dev, "sata-phy"); |
| if (IS_ERR(hpriv->phy)) { |
| rc = PTR_ERR(hpriv->phy); |
| switch (rc) { |
| case -ENOSYS: |
| /* No PHY support. Check if PHY is required. */ |
| if (of_find_property(dev->of_node, "phys", NULL)) { |
| dev_err(dev, "couldn't get sata-phy: ENOSYS\n"); |
| goto err_out; |
| } |
| case -ENODEV: |
| /* continue normally */ |
| hpriv->phy = NULL; |
| break; |
| |
| case -EPROBE_DEFER: |
| goto err_out; |
| |
| default: |
| dev_err(dev, "couldn't get sata-phy\n"); |
| goto err_out; |
| } |
| } |
| |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| hpriv->got_runtime_pm = true; |
| |
| devres_remove_group(dev, NULL); |
| return hpriv; |
| |
| err_out: |
| devres_release_group(dev, NULL); |
| return ERR_PTR(rc); |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_get_resources); |
| |
| /** |
| * ahci_platform_init_host - Bring up an ahci-platform host |
| * @pdev: platform device pointer for the host |
| * @hpriv: ahci-host private data for the host |
| * @pi_template: template for the ata_port_info to use |
| * @host_flags: ahci host flags used in ahci_host_priv |
| * @force_port_map: param passed to ahci_save_initial_config |
| * @mask_port_map: param passed to ahci_save_initial_config |
| * |
| * This function does all the usual steps needed to bring up an |
| * ahci-platform host, note any necessary resources (ie clks, phy, etc.) |
| * must be initialized / enabled before calling this. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_init_host(struct platform_device *pdev, |
| struct ahci_host_priv *hpriv, |
| const struct ata_port_info *pi_template, |
| unsigned long host_flags, |
| unsigned int force_port_map, |
| unsigned int mask_port_map) |
| { |
| struct device *dev = &pdev->dev; |
| struct ata_port_info pi = *pi_template; |
| const struct ata_port_info *ppi[] = { &pi, NULL }; |
| struct ata_host *host; |
| int i, irq, n_ports, rc; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) { |
| dev_err(dev, "no irq\n"); |
| return -EINVAL; |
| } |
| |
| /* prepare host */ |
| pi.private_data = (void *)host_flags; |
| hpriv->flags |= host_flags; |
| |
| ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map); |
| |
| if (hpriv->cap & HOST_CAP_NCQ) |
| pi.flags |= ATA_FLAG_NCQ; |
| |
| if (hpriv->cap & HOST_CAP_PMP) |
| pi.flags |= ATA_FLAG_PMP; |
| |
| ahci_set_em_messages(hpriv, &pi); |
| |
| /* CAP.NP sometimes indicate the index of the last enabled |
| * port, at other times, that of the last possible port, so |
| * determining the maximum port number requires looking at |
| * both CAP.NP and port_map. |
| */ |
| n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); |
| |
| host = ata_host_alloc_pinfo(dev, ppi, n_ports); |
| if (!host) |
| return -ENOMEM; |
| |
| host->private_data = hpriv; |
| |
| if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) |
| host->flags |= ATA_HOST_PARALLEL_SCAN; |
| else |
| dev_info(dev, "SSS flag set, parallel bus scan disabled\n"); |
| |
| if (pi.flags & ATA_FLAG_EM) |
| ahci_reset_em(host); |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| |
| ata_port_desc(ap, "mmio %pR", |
| platform_get_resource(pdev, IORESOURCE_MEM, 0)); |
| ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); |
| |
| /* set enclosure management message type */ |
| if (ap->flags & ATA_FLAG_EM) |
| ap->em_message_type = hpriv->em_msg_type; |
| |
| /* disabled/not-implemented port */ |
| if (!(hpriv->port_map & (1 << i))) |
| ap->ops = &ata_dummy_port_ops; |
| } |
| |
| rc = ahci_reset_controller(host); |
| if (rc) |
| return rc; |
| |
| ahci_init_controller(host); |
| ahci_print_info(host, "platform"); |
| |
| return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, |
| &ahci_platform_sht); |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_init_host); |
| |
| static void ahci_host_stop(struct ata_host *host) |
| { |
| struct device *dev = host->dev; |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| |
| if (pdata && pdata->exit) |
| pdata->exit(dev); |
| |
| ahci_platform_disable_resources(hpriv); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| /** |
| * ahci_platform_suspend_host - Suspend an ahci-platform host |
| * @dev: device pointer for the host |
| * |
| * This function does all the usual steps needed to suspend an |
| * ahci-platform host, note any necessary resources (ie clks, phy, etc.) |
| * must be disabled after calling this. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_suspend_host(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| void __iomem *mmio = hpriv->mmio; |
| u32 ctl; |
| |
| if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { |
| dev_err(dev, "firmware update required for suspend/resume\n"); |
| return -EIO; |
| } |
| |
| /* |
| * AHCI spec rev1.1 section 8.3.3: |
| * Software must disable interrupts prior to requesting a |
| * transition of the HBA to D3 state. |
| */ |
| ctl = readl(mmio + HOST_CTL); |
| ctl &= ~HOST_IRQ_EN; |
| writel(ctl, mmio + HOST_CTL); |
| readl(mmio + HOST_CTL); /* flush */ |
| |
| return ata_host_suspend(host, PMSG_SUSPEND); |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); |
| |
| /** |
| * ahci_platform_resume_host - Resume an ahci-platform host |
| * @dev: device pointer for the host |
| * |
| * This function does all the usual steps needed to resume an ahci-platform |
| * host, note any necessary resources (ie clks, phy, etc.) must be |
| * initialized / enabled before calling this. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_resume_host(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| int rc; |
| |
| if (dev->power.power_state.event == PM_EVENT_SUSPEND) { |
| rc = ahci_reset_controller(host); |
| if (rc) |
| return rc; |
| |
| ahci_init_controller(host); |
| } |
| |
| ata_host_resume(host); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_resume_host); |
| |
| /** |
| * ahci_platform_suspend - Suspend an ahci-platform device |
| * @dev: the platform device to suspend |
| * |
| * This function suspends the host associated with the device, followed by |
| * disabling all the resources of the device. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_suspend(struct device *dev) |
| { |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| int rc; |
| |
| rc = ahci_platform_suspend_host(dev); |
| if (rc) |
| return rc; |
| |
| if (pdata && pdata->suspend) { |
| rc = pdata->suspend(dev); |
| if (rc) |
| goto resume_host; |
| } |
| |
| ahci_platform_disable_resources(hpriv); |
| |
| return 0; |
| |
| resume_host: |
| ahci_platform_resume_host(dev); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_suspend); |
| |
| /** |
| * ahci_platform_resume - Resume an ahci-platform device |
| * @dev: the platform device to resume |
| * |
| * This function enables all the resources of the device followed by |
| * resuming the host associated with the device. |
| * |
| * RETURNS: |
| * 0 on success otherwise a negative error code |
| */ |
| int ahci_platform_resume(struct device *dev) |
| { |
| struct ahci_platform_data *pdata = dev_get_platdata(dev); |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| int rc; |
| |
| rc = ahci_platform_enable_resources(hpriv); |
| if (rc) |
| return rc; |
| |
| if (pdata && pdata->resume) { |
| rc = pdata->resume(dev); |
| if (rc) |
| goto disable_resources; |
| } |
| |
| rc = ahci_platform_resume_host(dev); |
| if (rc) |
| goto disable_resources; |
| |
| /* We resumed so update PM runtime state */ |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| return 0; |
| |
| disable_resources: |
| ahci_platform_disable_resources(hpriv); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(ahci_platform_resume); |
| #endif |
| |
| MODULE_DESCRIPTION("AHCI SATA platform library"); |
| MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); |
| MODULE_LICENSE("GPL"); |