| /* |
| * QLogic qlcnic NIC Driver |
| * Copyright (c) 2009-2013 QLogic Corporation |
| * |
| * See LICENSE.qlcnic for copyright and licensing details. |
| */ |
| |
| #include "qlcnic_sriov.h" |
| #include "qlcnic.h" |
| #include "qlcnic_hw.h" |
| |
| /* Reset template definitions */ |
| #define QLC_83XX_RESTART_TEMPLATE_SIZE 0x2000 |
| #define QLC_83XX_RESET_TEMPLATE_ADDR 0x4F0000 |
| #define QLC_83XX_RESET_SEQ_VERSION 0x0101 |
| |
| #define QLC_83XX_OPCODE_NOP 0x0000 |
| #define QLC_83XX_OPCODE_WRITE_LIST 0x0001 |
| #define QLC_83XX_OPCODE_READ_WRITE_LIST 0x0002 |
| #define QLC_83XX_OPCODE_POLL_LIST 0x0004 |
| #define QLC_83XX_OPCODE_POLL_WRITE_LIST 0x0008 |
| #define QLC_83XX_OPCODE_READ_MODIFY_WRITE 0x0010 |
| #define QLC_83XX_OPCODE_SEQ_PAUSE 0x0020 |
| #define QLC_83XX_OPCODE_SEQ_END 0x0040 |
| #define QLC_83XX_OPCODE_TMPL_END 0x0080 |
| #define QLC_83XX_OPCODE_POLL_READ_LIST 0x0100 |
| |
| /* EPORT control registers */ |
| #define QLC_83XX_RESET_CONTROL 0x28084E50 |
| #define QLC_83XX_RESET_REG 0x28084E60 |
| #define QLC_83XX_RESET_PORT0 0x28084E70 |
| #define QLC_83XX_RESET_PORT1 0x28084E80 |
| #define QLC_83XX_RESET_PORT2 0x28084E90 |
| #define QLC_83XX_RESET_PORT3 0x28084EA0 |
| #define QLC_83XX_RESET_SRESHIM 0x28084EB0 |
| #define QLC_83XX_RESET_EPGSHIM 0x28084EC0 |
| #define QLC_83XX_RESET_ETHERPCS 0x28084ED0 |
| |
| static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter); |
| static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev); |
| static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter); |
| static int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev); |
| static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *); |
| static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *); |
| |
| /* Template header */ |
| struct qlc_83xx_reset_hdr { |
| #if defined(__LITTLE_ENDIAN) |
| u16 version; |
| u16 signature; |
| u16 size; |
| u16 entries; |
| u16 hdr_size; |
| u16 checksum; |
| u16 init_offset; |
| u16 start_offset; |
| #elif defined(__BIG_ENDIAN) |
| u16 signature; |
| u16 version; |
| u16 entries; |
| u16 size; |
| u16 checksum; |
| u16 hdr_size; |
| u16 start_offset; |
| u16 init_offset; |
| #endif |
| } __packed; |
| |
| /* Command entry header. */ |
| struct qlc_83xx_entry_hdr { |
| #if defined(__LITTLE_ENDIAN) |
| u16 cmd; |
| u16 size; |
| u16 count; |
| u16 delay; |
| #elif defined(__BIG_ENDIAN) |
| u16 size; |
| u16 cmd; |
| u16 delay; |
| u16 count; |
| #endif |
| } __packed; |
| |
| /* Generic poll command */ |
| struct qlc_83xx_poll { |
| u32 mask; |
| u32 status; |
| } __packed; |
| |
| /* Read modify write command */ |
| struct qlc_83xx_rmw { |
| u32 mask; |
| u32 xor_value; |
| u32 or_value; |
| #if defined(__LITTLE_ENDIAN) |
| u8 shl; |
| u8 shr; |
| u8 index_a; |
| u8 rsvd; |
| #elif defined(__BIG_ENDIAN) |
| u8 rsvd; |
| u8 index_a; |
| u8 shr; |
| u8 shl; |
| #endif |
| } __packed; |
| |
| /* Generic command with 2 DWORD */ |
| struct qlc_83xx_entry { |
| u32 arg1; |
| u32 arg2; |
| } __packed; |
| |
| /* Generic command with 4 DWORD */ |
| struct qlc_83xx_quad_entry { |
| u32 dr_addr; |
| u32 dr_value; |
| u32 ar_addr; |
| u32 ar_value; |
| } __packed; |
| static const char *const qlc_83xx_idc_states[] = { |
| "Unknown", |
| "Cold", |
| "Init", |
| "Ready", |
| "Need Reset", |
| "Need Quiesce", |
| "Failed", |
| "Quiesce" |
| }; |
| |
| static int |
| qlcnic_83xx_idc_check_driver_presence_reg(struct qlcnic_adapter *adapter) |
| { |
| u32 val; |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); |
| if ((val & 0xFFFF)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static void qlcnic_83xx_idc_log_state_history(struct qlcnic_adapter *adapter) |
| { |
| u32 cur, prev; |
| cur = adapter->ahw->idc.curr_state; |
| prev = adapter->ahw->idc.prev_state; |
| |
| dev_info(&adapter->pdev->dev, |
| "current state = %s, prev state = %s\n", |
| adapter->ahw->idc.name[cur], |
| adapter->ahw->idc.name[prev]); |
| } |
| |
| static int qlcnic_83xx_idc_update_audit_reg(struct qlcnic_adapter *adapter, |
| u8 mode, int lock) |
| { |
| u32 val; |
| int seconds; |
| |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT); |
| val |= (adapter->portnum & 0xf); |
| val |= mode << 7; |
| if (mode) |
| seconds = jiffies / HZ - adapter->ahw->idc.sec_counter; |
| else |
| seconds = jiffies / HZ; |
| |
| val |= seconds << 8; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT, val); |
| adapter->ahw->idc.sec_counter = jiffies / HZ; |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static void qlcnic_83xx_idc_update_minor_version(struct qlcnic_adapter *adapter) |
| { |
| u32 val; |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MIN_VERSION); |
| val = val & ~(0x3 << (adapter->portnum * 2)); |
| val = val | (QLC_83XX_IDC_MINOR_VERSION << (adapter->portnum * 2)); |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_MIN_VERSION, val); |
| } |
| |
| static int qlcnic_83xx_idc_update_major_version(struct qlcnic_adapter *adapter, |
| int lock) |
| { |
| u32 val; |
| |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION); |
| val = val & ~0xFF; |
| val = val | QLC_83XX_IDC_MAJOR_VERSION; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION, val); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int |
| qlcnic_83xx_idc_update_drv_presence_reg(struct qlcnic_adapter *adapter, |
| int status, int lock) |
| { |
| u32 val; |
| |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); |
| |
| if (status) |
| val = val | (1 << adapter->portnum); |
| else |
| val = val & ~(1 << adapter->portnum); |
| |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val); |
| qlcnic_83xx_idc_update_minor_version(adapter); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_check_major_version(struct qlcnic_adapter *adapter) |
| { |
| u32 val; |
| u8 version; |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_MAJ_VERSION); |
| version = val & 0xFF; |
| |
| if (version != QLC_83XX_IDC_MAJOR_VERSION) { |
| dev_info(&adapter->pdev->dev, |
| "%s:mismatch. version 0x%x, expected version 0x%x\n", |
| __func__, version, QLC_83XX_IDC_MAJOR_VERSION); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_clear_registers(struct qlcnic_adapter *adapter, |
| int lock) |
| { |
| u32 val; |
| |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, 0); |
| /* Clear gracefull reset bit */ |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| val &= ~QLC_83XX_IDC_GRACEFULL_RESET; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_update_drv_ack_reg(struct qlcnic_adapter *adapter, |
| int flag, int lock) |
| { |
| u32 val; |
| |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_ACK); |
| if (flag) |
| val = val | (1 << adapter->portnum); |
| else |
| val = val & ~(1 << adapter->portnum); |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, val); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_check_timeout(struct qlcnic_adapter *adapter, |
| int time_limit) |
| { |
| u64 seconds; |
| |
| seconds = jiffies / HZ - adapter->ahw->idc.sec_counter; |
| if (seconds <= time_limit) |
| return 0; |
| else |
| return -EBUSY; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_check_reset_ack_reg |
| * |
| * @adapter: adapter structure |
| * |
| * Check ACK wait limit and clear the functions which failed to ACK |
| * |
| * Return 0 if all functions have acknowledged the reset request. |
| **/ |
| static int qlcnic_83xx_idc_check_reset_ack_reg(struct qlcnic_adapter *adapter) |
| { |
| int timeout; |
| u32 ack, presence, val; |
| |
| timeout = QLC_83XX_IDC_RESET_TIMEOUT_SECS; |
| ack = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_ACK); |
| presence = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); |
| dev_info(&adapter->pdev->dev, |
| "%s: ack = 0x%x, presence = 0x%x\n", __func__, ack, presence); |
| if (!((ack & presence) == presence)) { |
| if (qlcnic_83xx_idc_check_timeout(adapter, timeout)) { |
| /* Clear functions which failed to ACK */ |
| dev_info(&adapter->pdev->dev, |
| "%s: ACK wait exceeds time limit\n", __func__); |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); |
| val = val & ~(ack ^ presence); |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val); |
| dev_info(&adapter->pdev->dev, |
| "%s: updated drv presence reg = 0x%x\n", |
| __func__, val); |
| qlcnic_83xx_unlock_driver(adapter); |
| return 0; |
| |
| } else { |
| return 1; |
| } |
| } else { |
| dev_info(&adapter->pdev->dev, |
| "%s: Reset ACK received from all functions\n", |
| __func__); |
| return 0; |
| } |
| } |
| |
| /** |
| * qlcnic_83xx_idc_tx_soft_reset |
| * |
| * @adapter: adapter structure |
| * |
| * Handle context deletion and recreation request from transmit routine |
| * |
| * Returns -EBUSY or Success (0) |
| * |
| **/ |
| static int qlcnic_83xx_idc_tx_soft_reset(struct qlcnic_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) |
| return -EBUSY; |
| |
| netif_device_detach(netdev); |
| qlcnic_down(adapter, netdev); |
| qlcnic_up(adapter, netdev); |
| netif_device_attach(netdev); |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| netdev_info(adapter->netdev, "%s: soft reset complete.\n", __func__); |
| |
| return 0; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_detach_driver |
| * |
| * @adapter: adapter structure |
| * Detach net interface, stop TX and cleanup resources before the HW reset. |
| * Returns: None |
| * |
| **/ |
| static void qlcnic_83xx_idc_detach_driver(struct qlcnic_adapter *adapter) |
| { |
| int i; |
| struct net_device *netdev = adapter->netdev; |
| |
| netif_device_detach(netdev); |
| qlcnic_83xx_detach_mailbox_work(adapter); |
| |
| /* Disable mailbox interrupt */ |
| qlcnic_83xx_disable_mbx_intr(adapter); |
| qlcnic_down(adapter, netdev); |
| for (i = 0; i < adapter->ahw->num_msix; i++) { |
| adapter->ahw->intr_tbl[i].id = i; |
| adapter->ahw->intr_tbl[i].enabled = 0; |
| adapter->ahw->intr_tbl[i].src = 0; |
| } |
| |
| if (qlcnic_sriov_pf_check(adapter)) |
| qlcnic_sriov_pf_reset(adapter); |
| } |
| |
| /** |
| * qlcnic_83xx_idc_attach_driver |
| * |
| * @adapter: adapter structure |
| * |
| * Re-attach and re-enable net interface |
| * Returns: None |
| * |
| **/ |
| static void qlcnic_83xx_idc_attach_driver(struct qlcnic_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| if (netif_running(netdev)) { |
| if (qlcnic_up(adapter, netdev)) |
| goto done; |
| qlcnic_restore_indev_addr(netdev, NETDEV_UP); |
| } |
| done: |
| netif_device_attach(netdev); |
| } |
| |
| static int qlcnic_83xx_idc_enter_failed_state(struct qlcnic_adapter *adapter, |
| int lock) |
| { |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| qlcnic_83xx_idc_clear_registers(adapter, 0); |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_FAILED); |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| qlcnic_83xx_idc_log_state_history(adapter); |
| dev_info(&adapter->pdev->dev, "Device will enter failed state\n"); |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_enter_init_state(struct qlcnic_adapter *adapter, |
| int lock) |
| { |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_INIT); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_enter_need_quiesce(struct qlcnic_adapter *adapter, |
| int lock) |
| { |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, |
| QLC_83XX_IDC_DEV_NEED_QUISCENT); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int |
| qlcnic_83xx_idc_enter_need_reset_state(struct qlcnic_adapter *adapter, int lock) |
| { |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, |
| QLC_83XX_IDC_DEV_NEED_RESET); |
| |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_enter_ready_state(struct qlcnic_adapter *adapter, |
| int lock) |
| { |
| if (lock) { |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EBUSY; |
| } |
| |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, QLC_83XX_IDC_DEV_READY); |
| if (lock) |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_find_reset_owner_id |
| * |
| * @adapter: adapter structure |
| * |
| * NIC gets precedence over ISCSI and ISCSI has precedence over FCOE. |
| * Within the same class, function with lowest PCI ID assumes ownership |
| * |
| * Returns: reset owner id or failure indication (-EIO) |
| * |
| **/ |
| static int qlcnic_83xx_idc_find_reset_owner_id(struct qlcnic_adapter *adapter) |
| { |
| u32 reg, reg1, reg2, i, j, owner, class; |
| |
| reg1 = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_PARTITION_INFO_1); |
| reg2 = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_PARTITION_INFO_2); |
| owner = QLCNIC_TYPE_NIC; |
| i = 0; |
| j = 0; |
| reg = reg1; |
| |
| do { |
| class = (((reg & (0xF << j * 4)) >> j * 4) & 0x3); |
| if (class == owner) |
| break; |
| if (i == (QLC_83XX_IDC_MAX_FUNC_PER_PARTITION_INFO - 1)) { |
| reg = reg2; |
| j = 0; |
| } else { |
| j++; |
| } |
| |
| if (i == (QLC_83XX_IDC_MAX_CNA_FUNCTIONS - 1)) { |
| if (owner == QLCNIC_TYPE_NIC) |
| owner = QLCNIC_TYPE_ISCSI; |
| else if (owner == QLCNIC_TYPE_ISCSI) |
| owner = QLCNIC_TYPE_FCOE; |
| else if (owner == QLCNIC_TYPE_FCOE) |
| return -EIO; |
| reg = reg1; |
| j = 0; |
| i = 0; |
| } |
| } while (i++ < QLC_83XX_IDC_MAX_CNA_FUNCTIONS); |
| |
| return i; |
| } |
| |
| static int qlcnic_83xx_idc_restart_hw(struct qlcnic_adapter *adapter, int lock) |
| { |
| int ret = 0; |
| |
| ret = qlcnic_83xx_restart_hw(adapter); |
| |
| if (ret) { |
| qlcnic_83xx_idc_enter_failed_state(adapter, lock); |
| } else { |
| qlcnic_83xx_idc_clear_registers(adapter, lock); |
| ret = qlcnic_83xx_idc_enter_ready_state(adapter, lock); |
| } |
| |
| return ret; |
| } |
| |
| static int qlcnic_83xx_idc_check_fan_failure(struct qlcnic_adapter *adapter) |
| { |
| u32 status; |
| |
| status = QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS1); |
| |
| if (status & QLCNIC_RCODE_FATAL_ERROR) { |
| dev_err(&adapter->pdev->dev, |
| "peg halt status1=0x%x\n", status); |
| if (QLCNIC_FWERROR_CODE(status) == QLCNIC_FWERROR_FAN_FAILURE) { |
| dev_err(&adapter->pdev->dev, |
| "On board active cooling fan failed. " |
| "Device has been halted.\n"); |
| dev_err(&adapter->pdev->dev, |
| "Replace the adapter.\n"); |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter) |
| { |
| int err; |
| |
| qlcnic_83xx_reinit_mbx_work(adapter->ahw->mailbox); |
| qlcnic_83xx_enable_mbx_interrupt(adapter); |
| |
| qlcnic_83xx_initialize_nic(adapter, 1); |
| |
| err = qlcnic_sriov_pf_reinit(adapter); |
| if (err) |
| return err; |
| |
| qlcnic_83xx_enable_mbx_interrupt(adapter); |
| |
| if (qlcnic_83xx_configure_opmode(adapter)) { |
| qlcnic_83xx_idc_enter_failed_state(adapter, 1); |
| return -EIO; |
| } |
| |
| if (adapter->nic_ops->init_driver(adapter)) { |
| qlcnic_83xx_idc_enter_failed_state(adapter, 1); |
| return -EIO; |
| } |
| |
| if (adapter->portnum == 0) |
| qlcnic_set_drv_version(adapter); |
| |
| qlcnic_dcb_get_info(adapter->dcb); |
| qlcnic_83xx_idc_attach_driver(adapter); |
| |
| return 0; |
| } |
| |
| static void qlcnic_83xx_idc_update_idc_params(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| |
| qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 1); |
| qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); |
| set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); |
| |
| ahw->idc.quiesce_req = 0; |
| ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; |
| ahw->idc.err_code = 0; |
| ahw->idc.collect_dump = 0; |
| ahw->reset_context = 0; |
| adapter->tx_timeo_cnt = 0; |
| ahw->idc.delay_reset = 0; |
| |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| } |
| |
| /** |
| * qlcnic_83xx_idc_ready_state_entry |
| * |
| * @adapter: adapter structure |
| * |
| * Perform ready state initialization, this routine will get invoked only |
| * once from READY state. |
| * |
| * Returns: Error code or Success(0) |
| * |
| **/ |
| int qlcnic_83xx_idc_ready_state_entry(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| |
| if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_READY) { |
| qlcnic_83xx_idc_update_idc_params(adapter); |
| /* Re-attach the device if required */ |
| if ((ahw->idc.prev_state == QLC_83XX_IDC_DEV_NEED_RESET) || |
| (ahw->idc.prev_state == QLC_83XX_IDC_DEV_INIT)) { |
| if (qlcnic_83xx_idc_reattach_driver(adapter)) |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_vnic_pf_entry |
| * |
| * @adapter: adapter structure |
| * |
| * Ensure vNIC mode privileged function starts only after vNIC mode is |
| * enabled by management function. |
| * If vNIC mode is ready, start initialization. |
| * |
| * Returns: -EIO or 0 |
| * |
| **/ |
| int qlcnic_83xx_idc_vnic_pf_entry(struct qlcnic_adapter *adapter) |
| { |
| u32 state; |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| |
| /* Privileged function waits till mgmt function enables VNIC mode */ |
| state = QLCRDX(adapter->ahw, QLC_83XX_VNIC_STATE); |
| if (state != QLCNIC_DEV_NPAR_OPER) { |
| if (!ahw->idc.vnic_wait_limit--) { |
| qlcnic_83xx_idc_enter_failed_state(adapter, 1); |
| return -EIO; |
| } |
| dev_info(&adapter->pdev->dev, "vNIC mode disabled\n"); |
| return -EIO; |
| |
| } else { |
| /* Perform one time initialization from ready state */ |
| if (ahw->idc.vnic_state != QLCNIC_DEV_NPAR_OPER) { |
| qlcnic_83xx_idc_update_idc_params(adapter); |
| |
| /* If the previous state is UNKNOWN, device will be |
| already attached properly by Init routine*/ |
| if (ahw->idc.prev_state != QLC_83XX_IDC_DEV_UNKNOWN) { |
| if (qlcnic_83xx_idc_reattach_driver(adapter)) |
| return -EIO; |
| } |
| adapter->ahw->idc.vnic_state = QLCNIC_DEV_NPAR_OPER; |
| dev_info(&adapter->pdev->dev, "vNIC mode enabled\n"); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter) |
| { |
| adapter->ahw->idc.err_code = -EIO; |
| dev_err(&adapter->pdev->dev, |
| "%s: Device in unknown state\n", __func__); |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| return 0; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_cold_state |
| * |
| * @adapter: adapter structure |
| * |
| * If HW is up and running device will enter READY state. |
| * If firmware image from host needs to be loaded, device is |
| * forced to start with the file firmware image. |
| * |
| * Returns: Error code or Success(0) |
| * |
| **/ |
| static int qlcnic_83xx_idc_cold_state_handler(struct qlcnic_adapter *adapter) |
| { |
| qlcnic_83xx_idc_update_drv_presence_reg(adapter, 1, 0); |
| qlcnic_83xx_idc_update_audit_reg(adapter, 1, 0); |
| |
| if (qlcnic_load_fw_file) { |
| qlcnic_83xx_idc_restart_hw(adapter, 0); |
| } else { |
| if (qlcnic_83xx_check_hw_status(adapter)) { |
| qlcnic_83xx_idc_enter_failed_state(adapter, 0); |
| return -EIO; |
| } else { |
| qlcnic_83xx_idc_enter_ready_state(adapter, 0); |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_init_state |
| * |
| * @adapter: adapter structure |
| * |
| * Reset owner will restart the device from this state. |
| * Device will enter failed state if it remains |
| * in this state for more than DEV_INIT time limit. |
| * |
| * Returns: Error code or Success(0) |
| * |
| **/ |
| static int qlcnic_83xx_idc_init_state(struct qlcnic_adapter *adapter) |
| { |
| int timeout, ret = 0; |
| u32 owner; |
| |
| timeout = QLC_83XX_IDC_INIT_TIMEOUT_SECS; |
| if (adapter->ahw->idc.prev_state == QLC_83XX_IDC_DEV_NEED_RESET) { |
| owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); |
| if (adapter->ahw->pci_func == owner) |
| ret = qlcnic_83xx_idc_restart_hw(adapter, 1); |
| } else { |
| ret = qlcnic_83xx_idc_check_timeout(adapter, timeout); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_ready_state |
| * |
| * @adapter: adapter structure |
| * |
| * Perform IDC protocol specicifed actions after monitoring device state and |
| * events. |
| * |
| * Returns: Error code or Success(0) |
| * |
| **/ |
| static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| struct qlcnic_mailbox *mbx = ahw->mailbox; |
| int ret = 0; |
| u32 val; |
| |
| /* Perform NIC configuration based ready state entry actions */ |
| if (ahw->idc.state_entry(adapter)) |
| return -EIO; |
| |
| if (qlcnic_check_temp(adapter)) { |
| if (ahw->temp == QLCNIC_TEMP_PANIC) { |
| qlcnic_83xx_idc_check_fan_failure(adapter); |
| dev_err(&adapter->pdev->dev, |
| "Error: device temperature %d above limits\n", |
| adapter->ahw->temp); |
| clear_bit(QLC_83XX_MBX_READY, &mbx->status); |
| set_bit(__QLCNIC_RESETTING, &adapter->state); |
| qlcnic_83xx_idc_detach_driver(adapter); |
| qlcnic_83xx_idc_enter_failed_state(adapter, 1); |
| return -EIO; |
| } |
| } |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| ret = qlcnic_83xx_check_heartbeat(adapter); |
| if (ret) { |
| adapter->flags |= QLCNIC_FW_HANG; |
| if (!(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) { |
| clear_bit(QLC_83XX_MBX_READY, &mbx->status); |
| set_bit(__QLCNIC_RESETTING, &adapter->state); |
| qlcnic_83xx_idc_enter_need_reset_state(adapter, 1); |
| } else { |
| netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", |
| __func__); |
| qlcnic_83xx_idc_enter_failed_state(adapter, 1); |
| } |
| return -EIO; |
| } |
| |
| if ((val & QLC_83XX_IDC_GRACEFULL_RESET) || ahw->idc.collect_dump) { |
| clear_bit(QLC_83XX_MBX_READY, &mbx->status); |
| |
| /* Move to need reset state and prepare for reset */ |
| qlcnic_83xx_idc_enter_need_reset_state(adapter, 1); |
| return ret; |
| } |
| |
| /* Check for soft reset request */ |
| if (ahw->reset_context && |
| !(val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY)) { |
| adapter->ahw->reset_context = 0; |
| qlcnic_83xx_idc_tx_soft_reset(adapter); |
| return ret; |
| } |
| |
| /* Move to need quiesce state if requested */ |
| if (adapter->ahw->idc.quiesce_req) { |
| qlcnic_83xx_idc_enter_need_quiesce(adapter, 1); |
| qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * qlcnic_83xx_idc_need_reset_state |
| * |
| * @adapter: adapter structure |
| * |
| * Device will remain in this state until: |
| * Reset request ACK's are recieved from all the functions |
| * Wait time exceeds max time limit |
| * |
| * Returns: Error code or Success(0) |
| * |
| **/ |
| static int qlcnic_83xx_idc_need_reset_state(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_mailbox *mbx = adapter->ahw->mailbox; |
| int ret = 0; |
| |
| if (adapter->ahw->idc.prev_state != QLC_83XX_IDC_DEV_NEED_RESET) { |
| qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); |
| set_bit(__QLCNIC_RESETTING, &adapter->state); |
| clear_bit(QLC_83XX_MBX_READY, &mbx->status); |
| if (adapter->ahw->nic_mode == QLCNIC_VNIC_MODE) |
| qlcnic_83xx_disable_vnic_mode(adapter, 1); |
| |
| if (qlcnic_check_diag_status(adapter)) { |
| dev_info(&adapter->pdev->dev, |
| "%s: Wait for diag completion\n", __func__); |
| adapter->ahw->idc.delay_reset = 1; |
| return 0; |
| } else { |
| qlcnic_83xx_idc_update_drv_ack_reg(adapter, 1, 1); |
| qlcnic_83xx_idc_detach_driver(adapter); |
| } |
| } |
| |
| if (qlcnic_check_diag_status(adapter)) { |
| dev_info(&adapter->pdev->dev, |
| "%s: Wait for diag completion\n", __func__); |
| return -1; |
| } else { |
| if (adapter->ahw->idc.delay_reset) { |
| qlcnic_83xx_idc_update_drv_ack_reg(adapter, 1, 1); |
| qlcnic_83xx_idc_detach_driver(adapter); |
| adapter->ahw->idc.delay_reset = 0; |
| } |
| |
| /* Check for ACK from other functions */ |
| ret = qlcnic_83xx_idc_check_reset_ack_reg(adapter); |
| if (ret) { |
| dev_info(&adapter->pdev->dev, |
| "%s: Waiting for reset ACK\n", __func__); |
| return -1; |
| } |
| } |
| |
| /* Transit to INIT state and restart the HW */ |
| qlcnic_83xx_idc_enter_init_state(adapter, 1); |
| |
| return ret; |
| } |
| |
| static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter) |
| { |
| dev_err(&adapter->pdev->dev, "%s: TBD\n", __func__); |
| return 0; |
| } |
| |
| static void qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| u32 val, owner; |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { |
| owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); |
| if (ahw->pci_func == owner) { |
| qlcnic_83xx_stop_hw(adapter); |
| qlcnic_dump_fw(adapter); |
| } |
| } |
| |
| netdev_warn(adapter->netdev, "%s: Reboot will be required to recover the adapter!!\n", |
| __func__); |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| ahw->idc.err_code = -EIO; |
| |
| return; |
| } |
| |
| static int qlcnic_83xx_idc_quiesce_state(struct qlcnic_adapter *adapter) |
| { |
| dev_info(&adapter->pdev->dev, "%s: TBD\n", __func__); |
| return 0; |
| } |
| |
| static int qlcnic_83xx_idc_check_state_validity(struct qlcnic_adapter *adapter, |
| u32 state) |
| { |
| u32 cur, prev, next; |
| |
| cur = adapter->ahw->idc.curr_state; |
| prev = adapter->ahw->idc.prev_state; |
| next = state; |
| |
| if ((next < QLC_83XX_IDC_DEV_COLD) || |
| (next > QLC_83XX_IDC_DEV_QUISCENT)) { |
| dev_err(&adapter->pdev->dev, |
| "%s: curr %d, prev %d, next state %d is invalid\n", |
| __func__, cur, prev, state); |
| return 1; |
| } |
| |
| if ((cur == QLC_83XX_IDC_DEV_UNKNOWN) && |
| (prev == QLC_83XX_IDC_DEV_UNKNOWN)) { |
| if ((next != QLC_83XX_IDC_DEV_COLD) && |
| (next != QLC_83XX_IDC_DEV_READY)) { |
| dev_err(&adapter->pdev->dev, |
| "%s: failed, cur %d prev %d next %d\n", |
| __func__, cur, prev, next); |
| return 1; |
| } |
| } |
| |
| if (next == QLC_83XX_IDC_DEV_INIT) { |
| if ((prev != QLC_83XX_IDC_DEV_INIT) && |
| (prev != QLC_83XX_IDC_DEV_COLD) && |
| (prev != QLC_83XX_IDC_DEV_NEED_RESET)) { |
| dev_err(&adapter->pdev->dev, |
| "%s: failed, cur %d prev %d next %d\n", |
| __func__, cur, prev, next); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void qlcnic_83xx_periodic_tasks(struct qlcnic_adapter *adapter) |
| { |
| if (adapter->fhash.fnum) |
| qlcnic_prune_lb_filters(adapter); |
| } |
| |
| /** |
| * qlcnic_83xx_idc_poll_dev_state |
| * |
| * @work: kernel work queue structure used to schedule the function |
| * |
| * Poll device state periodically and perform state specific |
| * actions defined by Inter Driver Communication (IDC) protocol. |
| * |
| * Returns: None |
| * |
| **/ |
| void qlcnic_83xx_idc_poll_dev_state(struct work_struct *work) |
| { |
| struct qlcnic_adapter *adapter; |
| u32 state; |
| |
| adapter = container_of(work, struct qlcnic_adapter, fw_work.work); |
| state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE); |
| |
| if (qlcnic_83xx_idc_check_state_validity(adapter, state)) { |
| qlcnic_83xx_idc_log_state_history(adapter); |
| adapter->ahw->idc.curr_state = QLC_83XX_IDC_DEV_UNKNOWN; |
| } else { |
| adapter->ahw->idc.curr_state = state; |
| } |
| |
| switch (adapter->ahw->idc.curr_state) { |
| case QLC_83XX_IDC_DEV_READY: |
| qlcnic_83xx_idc_ready_state(adapter); |
| break; |
| case QLC_83XX_IDC_DEV_NEED_RESET: |
| qlcnic_83xx_idc_need_reset_state(adapter); |
| break; |
| case QLC_83XX_IDC_DEV_NEED_QUISCENT: |
| qlcnic_83xx_idc_need_quiesce_state(adapter); |
| break; |
| case QLC_83XX_IDC_DEV_FAILED: |
| qlcnic_83xx_idc_failed_state(adapter); |
| return; |
| case QLC_83XX_IDC_DEV_INIT: |
| qlcnic_83xx_idc_init_state(adapter); |
| break; |
| case QLC_83XX_IDC_DEV_QUISCENT: |
| qlcnic_83xx_idc_quiesce_state(adapter); |
| break; |
| default: |
| qlcnic_83xx_idc_unknown_state(adapter); |
| return; |
| } |
| adapter->ahw->idc.prev_state = adapter->ahw->idc.curr_state; |
| qlcnic_83xx_periodic_tasks(adapter); |
| |
| /* Re-schedule the function */ |
| if (test_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status)) |
| qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state, |
| adapter->ahw->idc.delay); |
| } |
| |
| static void qlcnic_83xx_setup_idc_parameters(struct qlcnic_adapter *adapter) |
| { |
| u32 idc_params, val; |
| |
| if (qlcnic_83xx_lockless_flash_read32(adapter, |
| QLC_83XX_IDC_FLASH_PARAM_ADDR, |
| (u8 *)&idc_params, 1)) { |
| dev_info(&adapter->pdev->dev, |
| "%s:failed to get IDC params from flash\n", __func__); |
| adapter->dev_init_timeo = QLC_83XX_IDC_INIT_TIMEOUT_SECS; |
| adapter->reset_ack_timeo = QLC_83XX_IDC_RESET_TIMEOUT_SECS; |
| } else { |
| adapter->dev_init_timeo = idc_params & 0xFFFF; |
| adapter->reset_ack_timeo = ((idc_params >> 16) & 0xFFFF); |
| } |
| |
| adapter->ahw->idc.curr_state = QLC_83XX_IDC_DEV_UNKNOWN; |
| adapter->ahw->idc.prev_state = QLC_83XX_IDC_DEV_UNKNOWN; |
| adapter->ahw->idc.delay = QLC_83XX_IDC_FW_POLL_DELAY; |
| adapter->ahw->idc.err_code = 0; |
| adapter->ahw->idc.collect_dump = 0; |
| adapter->ahw->idc.name = (char **)qlc_83xx_idc_states; |
| |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| set_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); |
| |
| /* Check if reset recovery is disabled */ |
| if (!qlcnic_auto_fw_reset) { |
| /* Propagate do not reset request to other functions */ |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| val = val | QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); |
| } |
| } |
| |
| static int |
| qlcnic_83xx_idc_first_to_load_function_handler(struct qlcnic_adapter *adapter) |
| { |
| u32 state, val; |
| |
| if (qlcnic_83xx_lock_driver(adapter)) |
| return -EIO; |
| |
| /* Clear driver lock register */ |
| QLCWRX(adapter->ahw, QLC_83XX_RECOVER_DRV_LOCK, 0); |
| if (qlcnic_83xx_idc_update_major_version(adapter, 0)) { |
| qlcnic_83xx_unlock_driver(adapter); |
| return -EIO; |
| } |
| |
| state = QLCRDX(adapter->ahw, QLC_83XX_IDC_DEV_STATE); |
| if (qlcnic_83xx_idc_check_state_validity(adapter, state)) { |
| qlcnic_83xx_unlock_driver(adapter); |
| return -EIO; |
| } |
| |
| if (state != QLC_83XX_IDC_DEV_COLD && qlcnic_load_fw_file) { |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DEV_STATE, |
| QLC_83XX_IDC_DEV_COLD); |
| state = QLC_83XX_IDC_DEV_COLD; |
| } |
| |
| adapter->ahw->idc.curr_state = state; |
| /* First to load function should cold boot the device */ |
| if (state == QLC_83XX_IDC_DEV_COLD) |
| qlcnic_83xx_idc_cold_state_handler(adapter); |
| |
| /* Check if reset recovery is enabled */ |
| if (qlcnic_auto_fw_reset) { |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| val = val & ~QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); |
| } |
| |
| qlcnic_83xx_unlock_driver(adapter); |
| |
| return 0; |
| } |
| |
| int qlcnic_83xx_idc_init(struct qlcnic_adapter *adapter) |
| { |
| int ret = -EIO; |
| |
| qlcnic_83xx_setup_idc_parameters(adapter); |
| |
| if (qlcnic_83xx_get_reset_instruction_template(adapter)) |
| return ret; |
| |
| if (!qlcnic_83xx_idc_check_driver_presence_reg(adapter)) { |
| if (qlcnic_83xx_idc_first_to_load_function_handler(adapter)) |
| return -EIO; |
| } else { |
| if (qlcnic_83xx_idc_check_major_version(adapter)) |
| return -EIO; |
| } |
| |
| qlcnic_83xx_idc_update_audit_reg(adapter, 0, 1); |
| |
| return 0; |
| } |
| |
| void qlcnic_83xx_idc_exit(struct qlcnic_adapter *adapter) |
| { |
| int id; |
| u32 val; |
| |
| while (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) |
| usleep_range(10000, 11000); |
| |
| id = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); |
| id = id & 0xFF; |
| |
| if (id == adapter->portnum) { |
| dev_err(&adapter->pdev->dev, |
| "%s: wait for lock recovery.. %d\n", __func__, id); |
| msleep(20); |
| id = QLCRDX(adapter->ahw, QLC_83XX_DRV_LOCK_ID); |
| id = id & 0xFF; |
| } |
| |
| /* Clear driver presence bit */ |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); |
| val = val & ~(1 << adapter->portnum); |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE, val); |
| clear_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status); |
| clear_bit(__QLCNIC_RESETTING, &adapter->state); |
| |
| cancel_delayed_work_sync(&adapter->fw_work); |
| } |
| |
| void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *adapter, u32 key) |
| { |
| u32 val; |
| |
| if (qlcnic_sriov_vf_check(adapter)) |
| return; |
| |
| if (qlcnic_83xx_lock_driver(adapter)) { |
| dev_err(&adapter->pdev->dev, |
| "%s:failed, please retry\n", __func__); |
| return; |
| } |
| |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { |
| netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", |
| __func__); |
| qlcnic_83xx_idc_enter_failed_state(adapter, 0); |
| qlcnic_83xx_unlock_driver(adapter); |
| return; |
| } |
| |
| if (key == QLCNIC_FORCE_FW_RESET) { |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| val = val | QLC_83XX_IDC_GRACEFULL_RESET; |
| QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); |
| } else if (key == QLCNIC_FORCE_FW_DUMP_KEY) { |
| adapter->ahw->idc.collect_dump = 1; |
| } |
| |
| qlcnic_83xx_unlock_driver(adapter); |
| return; |
| } |
| |
| static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter) |
| { |
| u8 *p_cache; |
| u32 src, size; |
| u64 dest; |
| int ret = -EIO; |
| |
| src = QLC_83XX_BOOTLOADER_FLASH_ADDR; |
| dest = QLCRDX(adapter->ahw, QLCNIC_BOOTLOADER_ADDR); |
| size = QLCRDX(adapter->ahw, QLCNIC_BOOTLOADER_SIZE); |
| |
| /* alignment check */ |
| if (size & 0xF) |
| size = (size + 16) & ~0xF; |
| |
| p_cache = vzalloc(size); |
| if (p_cache == NULL) |
| return -ENOMEM; |
| |
| ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache, |
| size / sizeof(u32)); |
| if (ret) { |
| vfree(p_cache); |
| return ret; |
| } |
| /* 16 byte write to MS memory */ |
| ret = qlcnic_83xx_ms_mem_write128(adapter, dest, (u32 *)p_cache, |
| size / 16); |
| if (ret) { |
| vfree(p_cache); |
| return ret; |
| } |
| vfree(p_cache); |
| |
| return ret; |
| } |
| |
| static int qlcnic_83xx_copy_fw_file(struct qlcnic_adapter *adapter) |
| { |
| struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info; |
| const struct firmware *fw = fw_info->fw; |
| u32 dest, *p_cache; |
| int i, ret = -EIO; |
| u8 data[16]; |
| size_t size; |
| u64 addr; |
| |
| dest = QLCRDX(adapter->ahw, QLCNIC_FW_IMAGE_ADDR); |
| size = (fw->size & ~0xF); |
| p_cache = (u32 *)fw->data; |
| addr = (u64)dest; |
| |
| ret = qlcnic_83xx_ms_mem_write128(adapter, addr, |
| (u32 *)p_cache, size / 16); |
| if (ret) { |
| dev_err(&adapter->pdev->dev, "MS memory write failed\n"); |
| release_firmware(fw); |
| fw_info->fw = NULL; |
| return -EIO; |
| } |
| |
| /* alignment check */ |
| if (fw->size & 0xF) { |
| addr = dest + size; |
| for (i = 0; i < (fw->size & 0xF); i++) |
| data[i] = fw->data[size + i]; |
| for (; i < 16; i++) |
| data[i] = 0; |
| ret = qlcnic_83xx_ms_mem_write128(adapter, addr, |
| (u32 *)data, 1); |
| if (ret) { |
| dev_err(&adapter->pdev->dev, |
| "MS memory write failed\n"); |
| release_firmware(fw); |
| fw_info->fw = NULL; |
| return -EIO; |
| } |
| } |
| release_firmware(fw); |
| fw_info->fw = NULL; |
| |
| return 0; |
| } |
| |
| static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) |
| { |
| int i, j; |
| u32 val = 0, val1 = 0, reg = 0; |
| int err = 0; |
| |
| val = QLCRD32(adapter, QLC_83XX_SRE_SHIM_REG, &err); |
| if (err == -EIO) |
| return; |
| dev_info(&adapter->pdev->dev, "SRE-Shim Ctrl:0x%x\n", val); |
| |
| for (j = 0; j < 2; j++) { |
| if (j == 0) { |
| dev_info(&adapter->pdev->dev, |
| "Port 0 RxB Pause Threshold Regs[TC7..TC0]:"); |
| reg = QLC_83XX_PORT0_THRESHOLD; |
| } else if (j == 1) { |
| dev_info(&adapter->pdev->dev, |
| "Port 1 RxB Pause Threshold Regs[TC7..TC0]:"); |
| reg = QLC_83XX_PORT1_THRESHOLD; |
| } |
| for (i = 0; i < 8; i++) { |
| val = QLCRD32(adapter, reg + (i * 0x4), &err); |
| if (err == -EIO) |
| return; |
| dev_info(&adapter->pdev->dev, "0x%x ", val); |
| } |
| dev_info(&adapter->pdev->dev, "\n"); |
| } |
| |
| for (j = 0; j < 2; j++) { |
| if (j == 0) { |
| dev_info(&adapter->pdev->dev, |
| "Port 0 RxB TC Max Cell Registers[4..1]:"); |
| reg = QLC_83XX_PORT0_TC_MC_REG; |
| } else if (j == 1) { |
| dev_info(&adapter->pdev->dev, |
| "Port 1 RxB TC Max Cell Registers[4..1]:"); |
| reg = QLC_83XX_PORT1_TC_MC_REG; |
| } |
| for (i = 0; i < 4; i++) { |
| val = QLCRD32(adapter, reg + (i * 0x4), &err); |
| if (err == -EIO) |
| return; |
| dev_info(&adapter->pdev->dev, "0x%x ", val); |
| } |
| dev_info(&adapter->pdev->dev, "\n"); |
| } |
| |
| for (j = 0; j < 2; j++) { |
| if (j == 0) { |
| dev_info(&adapter->pdev->dev, |
| "Port 0 RxB Rx TC Stats[TC7..TC0]:"); |
| reg = QLC_83XX_PORT0_TC_STATS; |
| } else if (j == 1) { |
| dev_info(&adapter->pdev->dev, |
| "Port 1 RxB Rx TC Stats[TC7..TC0]:"); |
| reg = QLC_83XX_PORT1_TC_STATS; |
| } |
| for (i = 7; i >= 0; i--) { |
| val = QLCRD32(adapter, reg, &err); |
| if (err == -EIO) |
| return; |
| val &= ~(0x7 << 29); /* Reset bits 29 to 31 */ |
| QLCWR32(adapter, reg, (val | (i << 29))); |
| val = QLCRD32(adapter, reg, &err); |
| if (err == -EIO) |
| return; |
| dev_info(&adapter->pdev->dev, "0x%x ", val); |
| } |
| dev_info(&adapter->pdev->dev, "\n"); |
| } |
| |
| val = QLCRD32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD, &err); |
| if (err == -EIO) |
| return; |
| val1 = QLCRD32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD, &err); |
| if (err == -EIO) |
| return; |
| dev_info(&adapter->pdev->dev, |
| "IFB-Pause Thresholds: Port 2:0x%x, Port 3:0x%x\n", |
| val, val1); |
| } |
| |
| |
| static void qlcnic_83xx_disable_pause_frames(struct qlcnic_adapter *adapter) |
| { |
| u32 reg = 0, i, j; |
| |
| if (qlcnic_83xx_lock_driver(adapter)) { |
| dev_err(&adapter->pdev->dev, |
| "%s:failed to acquire driver lock\n", __func__); |
| return; |
| } |
| |
| qlcnic_83xx_dump_pause_control_regs(adapter); |
| QLCWR32(adapter, QLC_83XX_SRE_SHIM_REG, 0x0); |
| |
| for (j = 0; j < 2; j++) { |
| if (j == 0) |
| reg = QLC_83XX_PORT0_THRESHOLD; |
| else if (j == 1) |
| reg = QLC_83XX_PORT1_THRESHOLD; |
| |
| for (i = 0; i < 8; i++) |
| QLCWR32(adapter, reg + (i * 0x4), 0x0); |
| } |
| |
| for (j = 0; j < 2; j++) { |
| if (j == 0) |
| reg = QLC_83XX_PORT0_TC_MC_REG; |
| else if (j == 1) |
| reg = QLC_83XX_PORT1_TC_MC_REG; |
| |
| for (i = 0; i < 4; i++) |
| QLCWR32(adapter, reg + (i * 0x4), 0x03FF03FF); |
| } |
| |
| QLCWR32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD, 0); |
| QLCWR32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD, 0); |
| dev_info(&adapter->pdev->dev, |
| "Disabled pause frames successfully on all ports\n"); |
| qlcnic_83xx_unlock_driver(adapter); |
| } |
| |
| static void qlcnic_83xx_take_eport_out_of_reset(struct qlcnic_adapter *adapter) |
| { |
| QLCWR32(adapter, QLC_83XX_RESET_REG, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_PORT0, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_PORT1, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_PORT2, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_PORT3, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_SRESHIM, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_EPGSHIM, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_ETHERPCS, 0); |
| QLCWR32(adapter, QLC_83XX_RESET_CONTROL, 1); |
| } |
| |
| static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev) |
| { |
| u32 heartbeat, peg_status; |
| int retries, ret = -EIO, err = 0; |
| |
| retries = QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT; |
| p_dev->heartbeat = QLC_SHARED_REG_RD32(p_dev, |
| QLCNIC_PEG_ALIVE_COUNTER); |
| |
| do { |
| msleep(QLCNIC_HEARTBEAT_PERIOD_MSECS); |
| heartbeat = QLC_SHARED_REG_RD32(p_dev, |
| QLCNIC_PEG_ALIVE_COUNTER); |
| if (heartbeat != p_dev->heartbeat) { |
| ret = QLCNIC_RCODE_SUCCESS; |
| break; |
| } |
| } while (--retries); |
| |
| if (ret) { |
| dev_err(&p_dev->pdev->dev, "firmware hang detected\n"); |
| qlcnic_83xx_take_eport_out_of_reset(p_dev); |
| qlcnic_83xx_disable_pause_frames(p_dev); |
| peg_status = QLC_SHARED_REG_RD32(p_dev, |
| QLCNIC_PEG_HALT_STATUS1); |
| dev_info(&p_dev->pdev->dev, "Dumping HW/FW registers\n" |
| "PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,\n" |
| "PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,\n" |
| "PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n" |
| "PEG_NET_4_PC: 0x%x\n", peg_status, |
| QLC_SHARED_REG_RD32(p_dev, QLCNIC_PEG_HALT_STATUS2), |
| QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_0, &err), |
| QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_1, &err), |
| QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_2, &err), |
| QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_3, &err), |
| QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_4, &err)); |
| |
| if (QLCNIC_FWERROR_CODE(peg_status) == 0x67) |
| dev_err(&p_dev->pdev->dev, |
| "Device is being reset err code 0x00006700.\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int qlcnic_83xx_check_cmd_peg_status(struct qlcnic_adapter *p_dev) |
| { |
| int retries = QLCNIC_CMDPEG_CHECK_RETRY_COUNT; |
| u32 val; |
| |
| do { |
| val = QLC_SHARED_REG_RD32(p_dev, QLCNIC_CMDPEG_STATE); |
| if (val == QLC_83XX_CMDPEG_COMPLETE) |
| return 0; |
| msleep(QLCNIC_CMDPEG_CHECK_DELAY); |
| } while (--retries); |
| |
| dev_err(&p_dev->pdev->dev, "%s: failed, state = 0x%x\n", __func__, val); |
| return -EIO; |
| } |
| |
| static int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev) |
| { |
| int err; |
| |
| err = qlcnic_83xx_check_cmd_peg_status(p_dev); |
| if (err) |
| return err; |
| |
| err = qlcnic_83xx_check_heartbeat(p_dev); |
| if (err) |
| return err; |
| |
| return err; |
| } |
| |
| static int qlcnic_83xx_poll_reg(struct qlcnic_adapter *p_dev, u32 addr, |
| int duration, u32 mask, u32 status) |
| { |
| int timeout_error, err = 0; |
| u32 value; |
| u8 retries; |
| |
| value = QLCRD32(p_dev, addr, &err); |
| if (err == -EIO) |
| return err; |
| retries = duration / 10; |
| |
| do { |
| if ((value & mask) != status) { |
| timeout_error = 1; |
| msleep(duration / 10); |
| value = QLCRD32(p_dev, addr, &err); |
| if (err == -EIO) |
| return err; |
| } else { |
| timeout_error = 0; |
| break; |
| } |
| } while (retries--); |
| |
| if (timeout_error) { |
| p_dev->ahw->reset.seq_error++; |
| dev_err(&p_dev->pdev->dev, |
| "%s: Timeout Err, entry_num = %d\n", |
| __func__, p_dev->ahw->reset.seq_index); |
| dev_err(&p_dev->pdev->dev, |
| "0x%08x 0x%08x 0x%08x\n", |
| value, mask, status); |
| } |
| |
| return timeout_error; |
| } |
| |
| static int qlcnic_83xx_reset_template_checksum(struct qlcnic_adapter *p_dev) |
| { |
| u32 sum = 0; |
| u16 *buff = (u16 *)p_dev->ahw->reset.buff; |
| int count = p_dev->ahw->reset.hdr->size / sizeof(u16); |
| |
| while (count-- > 0) |
| sum += *buff++; |
| |
| while (sum >> 16) |
| sum = (sum & 0xFFFF) + (sum >> 16); |
| |
| if (~sum) { |
| return 0; |
| } else { |
| dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); |
| return -1; |
| } |
| } |
| |
| static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_dev) |
| { |
| struct qlcnic_hardware_context *ahw = p_dev->ahw; |
| u32 addr, count, prev_ver, curr_ver; |
| u8 *p_buff; |
| |
| if (ahw->reset.buff != NULL) { |
| prev_ver = p_dev->fw_version; |
| curr_ver = qlcnic_83xx_get_fw_version(p_dev); |
| if (curr_ver > prev_ver) |
| kfree(ahw->reset.buff); |
| else |
| return 0; |
| } |
| |
| ahw->reset.seq_error = 0; |
| ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL); |
| if (p_dev->ahw->reset.buff == NULL) |
| return -ENOMEM; |
| |
| p_buff = p_dev->ahw->reset.buff; |
| addr = QLC_83XX_RESET_TEMPLATE_ADDR; |
| count = sizeof(struct qlc_83xx_reset_hdr) / sizeof(u32); |
| |
| /* Copy template header from flash */ |
| if (qlcnic_83xx_flash_read32(p_dev, addr, p_buff, count)) { |
| dev_err(&p_dev->pdev->dev, "%s: flash read failed\n", __func__); |
| return -EIO; |
| } |
| ahw->reset.hdr = (struct qlc_83xx_reset_hdr *)ahw->reset.buff; |
| addr = QLC_83XX_RESET_TEMPLATE_ADDR + ahw->reset.hdr->hdr_size; |
| p_buff = ahw->reset.buff + ahw->reset.hdr->hdr_size; |
| count = (ahw->reset.hdr->size - ahw->reset.hdr->hdr_size) / sizeof(u32); |
| |
| /* Copy rest of the template */ |
| if (qlcnic_83xx_flash_read32(p_dev, addr, p_buff, count)) { |
| dev_err(&p_dev->pdev->dev, "%s: flash read failed\n", __func__); |
| return -EIO; |
| } |
| |
| if (qlcnic_83xx_reset_template_checksum(p_dev)) |
| return -EIO; |
| /* Get Stop, Start and Init command offsets */ |
| ahw->reset.init_offset = ahw->reset.buff + ahw->reset.hdr->init_offset; |
| ahw->reset.start_offset = ahw->reset.buff + |
| ahw->reset.hdr->start_offset; |
| ahw->reset.stop_offset = ahw->reset.buff + ahw->reset.hdr->hdr_size; |
| return 0; |
| } |
| |
| /* Read Write HW register command */ |
| static void qlcnic_83xx_read_write_crb_reg(struct qlcnic_adapter *p_dev, |
| u32 raddr, u32 waddr) |
| { |
| int err = 0; |
| u32 value; |
| |
| value = QLCRD32(p_dev, raddr, &err); |
| if (err == -EIO) |
| return; |
| qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value); |
| } |
| |
| /* Read Modify Write HW register command */ |
| static void qlcnic_83xx_rmw_crb_reg(struct qlcnic_adapter *p_dev, |
| u32 raddr, u32 waddr, |
| struct qlc_83xx_rmw *p_rmw_hdr) |
| { |
| int err = 0; |
| u32 value; |
| |
| if (p_rmw_hdr->index_a) { |
| value = p_dev->ahw->reset.array[p_rmw_hdr->index_a]; |
| } else { |
| value = QLCRD32(p_dev, raddr, &err); |
| if (err == -EIO) |
| return; |
| } |
| |
| value &= p_rmw_hdr->mask; |
| value <<= p_rmw_hdr->shl; |
| value >>= p_rmw_hdr->shr; |
| value |= p_rmw_hdr->or_value; |
| value ^= p_rmw_hdr->xor_value; |
| qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value); |
| } |
| |
| /* Write HW register command */ |
| static void qlcnic_83xx_write_list(struct qlcnic_adapter *p_dev, |
| struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| int i; |
| struct qlc_83xx_entry *entry; |
| |
| entry = (struct qlc_83xx_entry *)((char *)p_hdr + |
| sizeof(struct qlc_83xx_entry_hdr)); |
| |
| for (i = 0; i < p_hdr->count; i++, entry++) { |
| qlcnic_83xx_wrt_reg_indirect(p_dev, entry->arg1, |
| entry->arg2); |
| if (p_hdr->delay) |
| udelay((u32)(p_hdr->delay)); |
| } |
| } |
| |
| /* Read and Write instruction */ |
| static void qlcnic_83xx_read_write_list(struct qlcnic_adapter *p_dev, |
| struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| int i; |
| struct qlc_83xx_entry *entry; |
| |
| entry = (struct qlc_83xx_entry *)((char *)p_hdr + |
| sizeof(struct qlc_83xx_entry_hdr)); |
| |
| for (i = 0; i < p_hdr->count; i++, entry++) { |
| qlcnic_83xx_read_write_crb_reg(p_dev, entry->arg1, |
| entry->arg2); |
| if (p_hdr->delay) |
| udelay((u32)(p_hdr->delay)); |
| } |
| } |
| |
| /* Poll HW register command */ |
| static void qlcnic_83xx_poll_list(struct qlcnic_adapter *p_dev, |
| struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| long delay; |
| struct qlc_83xx_entry *entry; |
| struct qlc_83xx_poll *poll; |
| int i, err = 0; |
| unsigned long arg1, arg2; |
| |
| poll = (struct qlc_83xx_poll *)((char *)p_hdr + |
| sizeof(struct qlc_83xx_entry_hdr)); |
| |
| entry = (struct qlc_83xx_entry *)((char *)poll + |
| sizeof(struct qlc_83xx_poll)); |
| delay = (long)p_hdr->delay; |
| |
| if (!delay) { |
| for (i = 0; i < p_hdr->count; i++, entry++) |
| qlcnic_83xx_poll_reg(p_dev, entry->arg1, |
| delay, poll->mask, |
| poll->status); |
| } else { |
| for (i = 0; i < p_hdr->count; i++, entry++) { |
| arg1 = entry->arg1; |
| arg2 = entry->arg2; |
| if (delay) { |
| if (qlcnic_83xx_poll_reg(p_dev, |
| arg1, delay, |
| poll->mask, |
| poll->status)){ |
| QLCRD32(p_dev, arg1, &err); |
| if (err == -EIO) |
| return; |
| QLCRD32(p_dev, arg2, &err); |
| if (err == -EIO) |
| return; |
| } |
| } |
| } |
| } |
| } |
| |
| /* Poll and write HW register command */ |
| static void qlcnic_83xx_poll_write_list(struct qlcnic_adapter *p_dev, |
| struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| int i; |
| long delay; |
| struct qlc_83xx_quad_entry *entry; |
| struct qlc_83xx_poll *poll; |
| |
| poll = (struct qlc_83xx_poll *)((char *)p_hdr + |
| sizeof(struct qlc_83xx_entry_hdr)); |
| entry = (struct qlc_83xx_quad_entry *)((char *)poll + |
| sizeof(struct qlc_83xx_poll)); |
| delay = (long)p_hdr->delay; |
| |
| for (i = 0; i < p_hdr->count; i++, entry++) { |
| qlcnic_83xx_wrt_reg_indirect(p_dev, entry->dr_addr, |
| entry->dr_value); |
| qlcnic_83xx_wrt_reg_indirect(p_dev, entry->ar_addr, |
| entry->ar_value); |
| if (delay) |
| qlcnic_83xx_poll_reg(p_dev, entry->ar_addr, delay, |
| poll->mask, poll->status); |
| } |
| } |
| |
| /* Read Modify Write register command */ |
| static void qlcnic_83xx_read_modify_write(struct qlcnic_adapter *p_dev, |
| struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| int i; |
| struct qlc_83xx_entry *entry; |
| struct qlc_83xx_rmw *rmw_hdr; |
| |
| rmw_hdr = (struct qlc_83xx_rmw *)((char *)p_hdr + |
| sizeof(struct qlc_83xx_entry_hdr)); |
| |
| entry = (struct qlc_83xx_entry *)((char *)rmw_hdr + |
| sizeof(struct qlc_83xx_rmw)); |
| |
| for (i = 0; i < p_hdr->count; i++, entry++) { |
| qlcnic_83xx_rmw_crb_reg(p_dev, entry->arg1, |
| entry->arg2, rmw_hdr); |
| if (p_hdr->delay) |
| udelay((u32)(p_hdr->delay)); |
| } |
| } |
| |
| static void qlcnic_83xx_pause(struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| if (p_hdr->delay) |
| mdelay((u32)((long)p_hdr->delay)); |
| } |
| |
| /* Read and poll register command */ |
| static void qlcnic_83xx_poll_read_list(struct qlcnic_adapter *p_dev, |
| struct qlc_83xx_entry_hdr *p_hdr) |
| { |
| long delay; |
| int index, i, j, err; |
| struct qlc_83xx_quad_entry *entry; |
| struct qlc_83xx_poll *poll; |
| unsigned long addr; |
| |
| poll = (struct qlc_83xx_poll *)((char *)p_hdr + |
| sizeof(struct qlc_83xx_entry_hdr)); |
| |
| entry = (struct qlc_83xx_quad_entry *)((char *)poll + |
| sizeof(struct qlc_83xx_poll)); |
| delay = (long)p_hdr->delay; |
| |
| for (i = 0; i < p_hdr->count; i++, entry++) { |
| qlcnic_83xx_wrt_reg_indirect(p_dev, entry->ar_addr, |
| entry->ar_value); |
| if (delay) { |
| if (!qlcnic_83xx_poll_reg(p_dev, entry->ar_addr, delay, |
| poll->mask, poll->status)){ |
| index = p_dev->ahw->reset.array_index; |
| addr = entry->dr_addr; |
| j = QLCRD32(p_dev, addr, &err); |
| if (err == -EIO) |
| return; |
| |
| p_dev->ahw->reset.array[index++] = j; |
| |
| if (index == QLC_83XX_MAX_RESET_SEQ_ENTRIES) |
| p_dev->ahw->reset.array_index = 1; |
| } |
| } |
| } |
| } |
| |
| static inline void qlcnic_83xx_seq_end(struct qlcnic_adapter *p_dev) |
| { |
| p_dev->ahw->reset.seq_end = 1; |
| } |
| |
| static void qlcnic_83xx_template_end(struct qlcnic_adapter *p_dev) |
| { |
| p_dev->ahw->reset.template_end = 1; |
| if (p_dev->ahw->reset.seq_error == 0) |
| dev_err(&p_dev->pdev->dev, |
| "HW restart process completed successfully.\n"); |
| else |
| dev_err(&p_dev->pdev->dev, |
| "HW restart completed with timeout errors.\n"); |
| } |
| |
| /** |
| * qlcnic_83xx_exec_template_cmd |
| * |
| * @p_dev: adapter structure |
| * @p_buff: Poiter to instruction template |
| * |
| * Template provides instructions to stop, restart and initalize firmware. |
| * These instructions are abstracted as a series of read, write and |
| * poll operations on hardware registers. Register information and operation |
| * specifics are not exposed to the driver. Driver reads the template from |
| * flash and executes the instructions located at pre-defined offsets. |
| * |
| * Returns: None |
| * */ |
| static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev, |
| char *p_buff) |
| { |
| int index, entries; |
| struct qlc_83xx_entry_hdr *p_hdr; |
| char *entry = p_buff; |
| |
| p_dev->ahw->reset.seq_end = 0; |
| p_dev->ahw->reset.template_end = 0; |
| entries = p_dev->ahw->reset.hdr->entries; |
| index = p_dev->ahw->reset.seq_index; |
| |
| for (; (!p_dev->ahw->reset.seq_end) && (index < entries); index++) { |
| p_hdr = (struct qlc_83xx_entry_hdr *)entry; |
| |
| switch (p_hdr->cmd) { |
| case QLC_83XX_OPCODE_NOP: |
| break; |
| case QLC_83XX_OPCODE_WRITE_LIST: |
| qlcnic_83xx_write_list(p_dev, p_hdr); |
| break; |
| case QLC_83XX_OPCODE_READ_WRITE_LIST: |
| qlcnic_83xx_read_write_list(p_dev, p_hdr); |
| break; |
| case QLC_83XX_OPCODE_POLL_LIST: |
| qlcnic_83xx_poll_list(p_dev, p_hdr); |
| break; |
| case QLC_83XX_OPCODE_POLL_WRITE_LIST: |
| qlcnic_83xx_poll_write_list(p_dev, p_hdr); |
| break; |
| case QLC_83XX_OPCODE_READ_MODIFY_WRITE: |
| qlcnic_83xx_read_modify_write(p_dev, p_hdr); |
| break; |
| case QLC_83XX_OPCODE_SEQ_PAUSE: |
| qlcnic_83xx_pause(p_hdr); |
| break; |
| case QLC_83XX_OPCODE_SEQ_END: |
| qlcnic_83xx_seq_end(p_dev); |
| break; |
| case QLC_83XX_OPCODE_TMPL_END: |
| qlcnic_83xx_template_end(p_dev); |
| break; |
| case QLC_83XX_OPCODE_POLL_READ_LIST: |
| qlcnic_83xx_poll_read_list(p_dev, p_hdr); |
| break; |
| default: |
| dev_err(&p_dev->pdev->dev, |
| "%s: Unknown opcode 0x%04x in template %d\n", |
| __func__, p_hdr->cmd, index); |
| break; |
| } |
| entry += p_hdr->size; |
| } |
| p_dev->ahw->reset.seq_index = index; |
| } |
| |
| static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev) |
| { |
| p_dev->ahw->reset.seq_index = 0; |
| |
| qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.stop_offset); |
| if (p_dev->ahw->reset.seq_end != 1) |
| dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); |
| } |
| |
| static void qlcnic_83xx_start_hw(struct qlcnic_adapter *p_dev) |
| { |
| qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.start_offset); |
| if (p_dev->ahw->reset.template_end != 1) |
| dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); |
| } |
| |
| static void qlcnic_83xx_init_hw(struct qlcnic_adapter *p_dev) |
| { |
| qlcnic_83xx_exec_template_cmd(p_dev, p_dev->ahw->reset.init_offset); |
| if (p_dev->ahw->reset.seq_end != 1) |
| dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__); |
| } |
| |
| static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter) |
| { |
| struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info; |
| int err = -EIO; |
| |
| if (request_firmware(&fw_info->fw, fw_info->fw_file_name, |
| &(adapter->pdev->dev))) { |
| dev_err(&adapter->pdev->dev, |
| "No file FW image, loading flash FW image.\n"); |
| QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, |
| QLC_83XX_BOOT_FROM_FLASH); |
| } else { |
| if (qlcnic_83xx_copy_fw_file(adapter)) |
| return err; |
| QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, |
| QLC_83XX_BOOT_FROM_FILE); |
| } |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) |
| { |
| u32 val; |
| int err = -EIO; |
| |
| qlcnic_83xx_stop_hw(adapter); |
| |
| /* Collect FW register dump if required */ |
| val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); |
| if (!(val & QLC_83XX_IDC_GRACEFULL_RESET)) |
| qlcnic_dump_fw(adapter); |
| |
| if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { |
| netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", |
| __func__); |
| qlcnic_83xx_idc_enter_failed_state(adapter, 1); |
| return err; |
| } |
| |
| qlcnic_83xx_init_hw(adapter); |
| |
| if (qlcnic_83xx_copy_bootloader(adapter)) |
| return err; |
| /* Boot either flash image or firmware image from host file system */ |
| if (qlcnic_load_fw_file) { |
| if (qlcnic_83xx_load_fw_image_from_host(adapter)) |
| return err; |
| } else { |
| QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID, |
| QLC_83XX_BOOT_FROM_FLASH); |
| } |
| |
| qlcnic_83xx_start_hw(adapter); |
| if (qlcnic_83xx_check_hw_status(adapter)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter) |
| { |
| int err; |
| struct qlcnic_info nic_info; |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| |
| memset(&nic_info, 0, sizeof(struct qlcnic_info)); |
| err = qlcnic_get_nic_info(adapter, &nic_info, ahw->pci_func); |
| if (err) |
| return -EIO; |
| |
| ahw->physical_port = (u8) nic_info.phys_port; |
| ahw->switch_mode = nic_info.switch_mode; |
| ahw->max_tx_ques = nic_info.max_tx_ques; |
| ahw->max_rx_ques = nic_info.max_rx_ques; |
| ahw->capabilities = nic_info.capabilities; |
| ahw->max_mac_filters = nic_info.max_mac_filters; |
| ahw->max_mtu = nic_info.max_mtu; |
| |
| adapter->max_tx_rings = ahw->max_tx_ques; |
| adapter->max_sds_rings = ahw->max_rx_ques; |
| /* eSwitch capability indicates vNIC mode. |
| * vNIC and SRIOV are mutually exclusive operational modes. |
| * If SR-IOV capability is detected, SR-IOV physical function |
| * will get initialized in default mode. |
| * SR-IOV virtual function initialization follows a |
| * different code path and opmode. |
| * SRIOV mode has precedence over vNIC mode. |
| */ |
| if (test_bit(__QLCNIC_SRIOV_CAPABLE, &adapter->state)) |
| return QLC_83XX_DEFAULT_OPMODE; |
| |
| if (ahw->capabilities & QLC_83XX_ESWITCH_CAPABILITY) |
| return QLCNIC_VNIC_MODE; |
| |
| return QLC_83XX_DEFAULT_OPMODE; |
| } |
| |
| int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| int ret; |
| |
| ret = qlcnic_83xx_get_nic_configuration(adapter); |
| if (ret == -EIO) |
| return -EIO; |
| |
| if (ret == QLCNIC_VNIC_MODE) { |
| ahw->nic_mode = QLCNIC_VNIC_MODE; |
| |
| if (qlcnic_83xx_config_vnic_opmode(adapter)) |
| return -EIO; |
| |
| adapter->max_sds_rings = QLCNIC_MAX_VNIC_SDS_RINGS; |
| adapter->max_tx_rings = QLCNIC_MAX_VNIC_TX_RINGS; |
| } else if (ret == QLC_83XX_DEFAULT_OPMODE) { |
| ahw->nic_mode = QLCNIC_DEFAULT_MODE; |
| adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver; |
| ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry; |
| adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS; |
| adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS; |
| } else { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void qlcnic_83xx_config_buff_descriptors(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| |
| if (ahw->port_type == QLCNIC_XGBE) { |
| adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G; |
| adapter->max_rxd = MAX_RCV_DESCRIPTORS_10G; |
| adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G; |
| adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G; |
| |
| } else if (ahw->port_type == QLCNIC_GBE) { |
| adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_1G; |
| adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G; |
| adapter->max_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G; |
| adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G; |
| } |
| adapter->num_txd = MAX_CMD_DESCRIPTORS; |
| adapter->max_rds_rings = MAX_RDS_RINGS; |
| } |
| |
| static int qlcnic_83xx_init_default_driver(struct qlcnic_adapter *adapter) |
| { |
| int err = -EIO; |
| |
| qlcnic_83xx_get_minidump_template(adapter); |
| if (qlcnic_83xx_get_port_info(adapter)) |
| return err; |
| |
| qlcnic_83xx_config_buff_descriptors(adapter); |
| adapter->ahw->msix_supported = !!qlcnic_use_msi_x; |
| adapter->flags |= QLCNIC_ADAPTER_INITIALIZED; |
| |
| dev_info(&adapter->pdev->dev, "HAL Version: %d\n", |
| adapter->ahw->fw_hal_version); |
| |
| return 0; |
| } |
| |
| #define IS_QLC_83XX_USED(a, b, c) (((1 << a->portnum) & b) || ((c >> 6) & 0x1)) |
| static void qlcnic_83xx_clear_function_resources(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_cmd_args cmd; |
| u32 presence_mask, audit_mask; |
| int status; |
| |
| presence_mask = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_PRESENCE); |
| audit_mask = QLCRDX(adapter->ahw, QLC_83XX_IDC_DRV_AUDIT); |
| |
| if (IS_QLC_83XX_USED(adapter, presence_mask, audit_mask)) { |
| status = qlcnic_alloc_mbx_args(&cmd, adapter, |
| QLCNIC_CMD_STOP_NIC_FUNC); |
| if (status) |
| return; |
| |
| cmd.req.arg[1] = BIT_31; |
| status = qlcnic_issue_cmd(adapter, &cmd); |
| if (status) |
| dev_err(&adapter->pdev->dev, |
| "Failed to clean up the function resources\n"); |
| qlcnic_free_mbx_args(&cmd); |
| } |
| } |
| |
| static int qlcnic_83xx_get_fw_info(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| struct pci_dev *pdev = adapter->pdev; |
| struct qlc_83xx_fw_info *fw_info; |
| int err = 0; |
| |
| ahw->fw_info = kzalloc(sizeof(*fw_info), GFP_KERNEL); |
| if (!ahw->fw_info) { |
| err = -ENOMEM; |
| } else { |
| fw_info = ahw->fw_info; |
| switch (pdev->device) { |
| case PCI_DEVICE_ID_QLOGIC_QLE834X: |
| strncpy(fw_info->fw_file_name, QLC_83XX_FW_FILE_NAME, |
| QLC_FW_FILE_NAME_LEN); |
| break; |
| case PCI_DEVICE_ID_QLOGIC_QLE844X: |
| strncpy(fw_info->fw_file_name, QLC_84XX_FW_FILE_NAME, |
| QLC_FW_FILE_NAME_LEN); |
| break; |
| default: |
| dev_err(&pdev->dev, "%s: Invalid device id\n", |
| __func__); |
| err = -EINVAL; |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| static void qlcnic_83xx_init_rings(struct qlcnic_adapter *adapter) |
| { |
| u8 rx_cnt = QLCNIC_DEF_SDS_RINGS; |
| u8 tx_cnt = QLCNIC_DEF_TX_RINGS; |
| |
| adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS; |
| adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS; |
| |
| if (!adapter->ahw->msix_supported) { |
| rx_cnt = QLCNIC_SINGLE_RING; |
| tx_cnt = QLCNIC_SINGLE_RING; |
| } |
| |
| /* compute and set drv sds rings */ |
| qlcnic_set_tx_ring_count(adapter, tx_cnt); |
| qlcnic_set_sds_ring_count(adapter, rx_cnt); |
| } |
| |
| int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| int err = 0; |
| |
| adapter->rx_mac_learn = false; |
| ahw->msix_supported = !!qlcnic_use_msi_x; |
| |
| qlcnic_83xx_init_rings(adapter); |
| |
| err = qlcnic_83xx_init_mailbox_work(adapter); |
| if (err) |
| goto exit; |
| |
| if (qlcnic_sriov_vf_check(adapter)) { |
| err = qlcnic_sriov_vf_init(adapter, pci_using_dac); |
| if (err) |
| goto detach_mbx; |
| else |
| return err; |
| } |
| |
| if (qlcnic_83xx_read_flash_descriptor_table(adapter) || |
| qlcnic_83xx_read_flash_mfg_id(adapter)) { |
| dev_err(&adapter->pdev->dev, "Failed reading flash mfg id\n"); |
| err = -ENOTRECOVERABLE; |
| goto detach_mbx; |
| } |
| |
| err = qlcnic_83xx_check_hw_status(adapter); |
| if (err) |
| goto detach_mbx; |
| |
| err = qlcnic_83xx_get_fw_info(adapter); |
| if (err) |
| goto detach_mbx; |
| |
| err = qlcnic_83xx_idc_init(adapter); |
| if (err) |
| goto detach_mbx; |
| |
| err = qlcnic_setup_intr(adapter); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to setup interrupt\n"); |
| goto disable_intr; |
| } |
| |
| err = qlcnic_83xx_setup_mbx_intr(adapter); |
| if (err) |
| goto disable_mbx_intr; |
| |
| qlcnic_83xx_clear_function_resources(adapter); |
| |
| INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work); |
| |
| qlcnic_83xx_initialize_nic(adapter, 1); |
| |
| /* Configure default, SR-IOV or Virtual NIC mode of operation */ |
| err = qlcnic_83xx_configure_opmode(adapter); |
| if (err) |
| goto disable_mbx_intr; |
| |
| |
| /* Perform operating mode specific initialization */ |
| err = adapter->nic_ops->init_driver(adapter); |
| if (err) |
| goto disable_mbx_intr; |
| |
| /* Periodically monitor device status */ |
| qlcnic_83xx_idc_poll_dev_state(&adapter->fw_work.work); |
| return 0; |
| |
| disable_mbx_intr: |
| qlcnic_83xx_free_mbx_intr(adapter); |
| |
| disable_intr: |
| qlcnic_teardown_intr(adapter); |
| |
| detach_mbx: |
| qlcnic_83xx_detach_mailbox_work(adapter); |
| qlcnic_83xx_free_mailbox(ahw->mailbox); |
| ahw->mailbox = NULL; |
| exit: |
| return err; |
| } |
| |
| void qlcnic_83xx_aer_stop_poll_work(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| struct qlc_83xx_idc *idc = &ahw->idc; |
| |
| clear_bit(QLC_83XX_MBX_READY, &idc->status); |
| cancel_delayed_work_sync(&adapter->fw_work); |
| |
| if (ahw->nic_mode == QLCNIC_VNIC_MODE) |
| qlcnic_83xx_disable_vnic_mode(adapter, 1); |
| |
| qlcnic_83xx_idc_detach_driver(adapter); |
| qlcnic_83xx_initialize_nic(adapter, 0); |
| |
| cancel_delayed_work_sync(&adapter->idc_aen_work); |
| } |
| |
| int qlcnic_83xx_aer_reset(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| struct qlc_83xx_idc *idc = &ahw->idc; |
| int ret = 0; |
| u32 owner; |
| |
| /* Mark the previous IDC state as NEED_RESET so |
| * that state_entry() will perform the reattachment |
| * and bringup the device |
| */ |
| idc->prev_state = QLC_83XX_IDC_DEV_NEED_RESET; |
| owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); |
| if (ahw->pci_func == owner) { |
| ret = qlcnic_83xx_restart_hw(adapter); |
| if (ret < 0) |
| return ret; |
| qlcnic_83xx_idc_clear_registers(adapter, 0); |
| } |
| |
| ret = idc->state_entry(adapter); |
| return ret; |
| } |
| |
| void qlcnic_83xx_aer_start_poll_work(struct qlcnic_adapter *adapter) |
| { |
| struct qlcnic_hardware_context *ahw = adapter->ahw; |
| struct qlc_83xx_idc *idc = &ahw->idc; |
| u32 owner; |
| |
| idc->prev_state = QLC_83XX_IDC_DEV_READY; |
| owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); |
| if (ahw->pci_func == owner) |
| qlcnic_83xx_idc_enter_ready_state(adapter, 0); |
| |
| qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state, 0); |
| } |