drivers/net/dsa/mv88e6123_61_65.c - arm/linux-arm64-legacy - Git at Google

 /*
  * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
  * Copyright (c) 2008-2009 Marvell Semiconductor
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>
 #include "mv88e6xxx.h"

 static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr)
 {
 	int ret;

 	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
 	if (ret >= 0) {
 		if (ret == 0x1212)
 			return "Marvell 88E6123 (A1)";
 		if (ret == 0x1213)
 			return "Marvell 88E6123 (A2)";
 		if ((ret & 0xfff0) == 0x1210)
 			return "Marvell 88E6123";

 		if (ret == 0x1612)
 			return "Marvell 88E6161 (A1)";
 		if (ret == 0x1613)
 			return "Marvell 88E6161 (A2)";
 		if ((ret & 0xfff0) == 0x1610)
 			return "Marvell 88E6161";

 		if (ret == 0x1652)
 			return "Marvell 88E6165 (A1)";
 		if (ret == 0x1653)
 			return "Marvell 88e6165 (A2)";
 		if ((ret & 0xfff0) == 0x1650)
 			return "Marvell 88E6165";
 	}

 	return NULL;
 }

 static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
 {
 	int i;
 	int ret;
 	unsigned long timeout;

 	/* Set all ports to the disabled state. */
 	for (i = 0; i < 8; i++) {
 		ret = REG_READ(REG_PORT(i), 0x04);
 		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
 	}

 	/* Wait for transmit queues to drain. */
 	usleep_range(2000, 4000);

 	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);

 	/* Wait up to one second for reset to complete. */
 	timeout = jiffies + 1 * HZ;
 	while (time_before(jiffies, timeout)) {
 		ret = REG_READ(REG_GLOBAL, 0x00);
 		if ((ret & 0xc800) == 0xc800)
 			break;

 		usleep_range(1000, 2000);
 	}
 	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;

 	return 0;
 }

 static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
 {
 	int ret;
 	int i;

 	/* Disable the PHY polling unit (since there won't be any
 	 * external PHYs to poll), don't discard packets with
 	 * excessive collisions, and mask all interrupt sources.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x04, 0x0000);

 	/* Set the default address aging time to 5 minutes, and
 	 * enable address learn messages to be sent to all message
 	 * ports.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);

 	/* Configure the priority mapping registers. */
 	ret = mv88e6xxx_config_prio(ds);
 	if (ret < 0)
 		return ret;

 	/* Configure the upstream port, and configure the upstream
 	 * port as the port to which ingress and egress monitor frames
 	 * are to be sent.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));

 	/* Disable remote management for now, and set the switch's
 	 * DSA device number.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);

 	/* Send all frames with destination addresses matching
 	 * 01:80:c2:00:00:2x to the CPU port.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);

 	/* Send all frames with destination addresses matching
 	 * 01:80:c2:00:00:0x to the CPU port.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);

 	/* Disable the loopback filter, disable flow control
 	 * messages, disable flood broadcast override, disable
 	 * removing of provider tags, disable ATU age violation
 	 * interrupts, disable tag flow control, force flow
 	 * control priority to the highest, and send all special
 	 * multicast frames to the CPU at the highest priority.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);

 	/* Program the DSA routing table. */
 	for (i = 0; i < 32; i++) {
 		int nexthop;

 		nexthop = 0x1f;
 		if (i != ds->index && i < ds->dst->pd->nr_chips)
 			nexthop = ds->pd->rtable[i] & 0x1f;

 		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
 	}

 	/* Clear all trunk masks. */
 	for (i = 0; i < 8; i++)
 		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);

 	/* Clear all trunk mappings. */
 	for (i = 0; i < 16; i++)
 		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));

 	/* Disable ingress rate limiting by resetting all ingress
 	 * rate limit registers to their initial state.
 	 */
 	for (i = 0; i < 6; i++)
 		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));

 	/* Initialise cross-chip port VLAN table to reset defaults. */
 	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);

 	/* Clear the priority override table. */
 	for (i = 0; i < 16; i++)
 		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));

 	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */

 	return 0;
 }

 static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 {
 	int addr = REG_PORT(p);
 	u16 val;

 	/* MAC Forcing register: don't force link, speed, duplex
 	 * or flow control state to any particular values on physical
 	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
 	 * full duplex.
 	 */
 	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
 		REG_WRITE(addr, 0x01, 0x003e);
 	else
 		REG_WRITE(addr, 0x01, 0x0003);

 	/* Do not limit the period of time that this port can be
 	 * paused for by the remote end or the period of time that
 	 * this port can pause the remote end.
 	 */
 	REG_WRITE(addr, 0x02, 0x0000);

 	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
 	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
 	 * tunneling, determine priority by looking at 802.1p and IP
 	 * priority fields (IP prio has precedence), and set STP state
 	 * to Forwarding.
 	 *
 	 * If this is the CPU link, use DSA or EDSA tagging depending
 	 * on which tagging mode was configured.
 	 *
 	 * If this is a link to another switch, use DSA tagging mode.
 	 *
 	 * If this is the upstream port for this switch, enable
 	 * forwarding of unknown unicasts and multicasts.
 	 */
 	val = 0x0433;
 	if (dsa_is_cpu_port(ds, p)) {
 		if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
 			val |= 0x3300;
 		else
 			val |= 0x0100;
 	}
 	if (ds->dsa_port_mask & (1 << p))
 		val |= 0x0100;
 	if (p == dsa_upstream_port(ds))
 		val |= 0x000c;
 	REG_WRITE(addr, 0x04, val);

 	/* Port Control 1: disable trunking.  Also, if this is the
 	 * CPU port, enable learn messages to be sent to this port.
 	 */
 	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);

 	/* Port based VLAN map: give each port its own address
 	 * database, allow the CPU port to talk to each of the 'real'
 	 * ports, and allow each of the 'real' ports to only talk to
 	 * the upstream port.
 	 */
 	val = (p & 0xf) << 12;
 	if (dsa_is_cpu_port(ds, p))
 		val |= ds->phys_port_mask;
 	else
 		val |= 1 << dsa_upstream_port(ds);
 	REG_WRITE(addr, 0x06, val);

 	/* Default VLAN ID and priority: don't set a default VLAN
 	 * ID, and set the default packet priority to zero.
 	 */
 	REG_WRITE(addr, 0x07, 0x0000);

 	/* Port Control 2: don't force a good FCS, set the maximum
 	 * frame size to 10240 bytes, don't let the switch add or
 	 * strip 802.1q tags, don't discard tagged or untagged frames
 	 * on this port, do a destination address lookup on all
 	 * received packets as usual, disable ARP mirroring and don't
 	 * send a copy of all transmitted/received frames on this port
 	 * to the CPU.
 	 */
 	REG_WRITE(addr, 0x08, 0x2080);

 	/* Egress rate control: disable egress rate control. */
 	REG_WRITE(addr, 0x09, 0x0001);

 	/* Egress rate control 2: disable egress rate control. */
 	REG_WRITE(addr, 0x0a, 0x0000);

 	/* Port Association Vector: when learning source addresses
 	 * of packets, add the address to the address database using
 	 * a port bitmap that has only the bit for this port set and
 	 * the other bits clear.
 	 */
 	REG_WRITE(addr, 0x0b, 1 << p);

 	/* Port ATU control: disable limiting the number of address
 	 * database entries that this port is allowed to use.
 	 */
 	REG_WRITE(addr, 0x0c, 0x0000);

 	/* Priority Override: disable DA, SA and VTU priority override. */
 	REG_WRITE(addr, 0x0d, 0x0000);

 	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
 	REG_WRITE(addr, 0x0f, ETH_P_EDSA);

 	/* Tag Remap: use an identity 802.1p prio -> switch prio
 	 * mapping.
 	 */
 	REG_WRITE(addr, 0x18, 0x3210);

 	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
 	 * mapping.
 	 */
 	REG_WRITE(addr, 0x19, 0x7654);

 	return 0;
 }

 static int mv88e6123_61_65_setup(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
 	int i;
 	int ret;

 	mutex_init(&ps->smi_mutex);
 	mutex_init(&ps->stats_mutex);

 	ret = mv88e6123_61_65_switch_reset(ds);
 	if (ret < 0)
 		return ret;

 	/* @@@ initialise vtu and atu */

 	ret = mv88e6123_61_65_setup_global(ds);
 	if (ret < 0)
 		return ret;

 	for (i = 0; i < 6; i++) {
 		ret = mv88e6123_61_65_setup_port(ds, i);
 		if (ret < 0)
 			return ret;
 	}

 	return 0;
 }

 static int mv88e6123_61_65_port_to_phy_addr(int port)
 {
 	if (port >= 0 && port <= 4)
 		return port;
 	return -1;
 }

 static int
 mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum)
 {
 	int addr = mv88e6123_61_65_port_to_phy_addr(port);
 	return mv88e6xxx_phy_read(ds, addr, regnum);
 }

 static int
 mv88e6123_61_65_phy_write(struct dsa_switch *ds,
 			      int port, int regnum, u16 val)
 {
 	int addr = mv88e6123_61_65_port_to_phy_addr(port);
 	return mv88e6xxx_phy_write(ds, addr, regnum, val);
 }

 static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = {
 	{ "in_good_octets", 8, 0x00, },
 	{ "in_bad_octets", 4, 0x02, },
 	{ "in_unicast", 4, 0x04, },
 	{ "in_broadcasts", 4, 0x06, },
 	{ "in_multicasts", 4, 0x07, },
 	{ "in_pause", 4, 0x16, },
 	{ "in_undersize", 4, 0x18, },
 	{ "in_fragments", 4, 0x19, },
 	{ "in_oversize", 4, 0x1a, },
 	{ "in_jabber", 4, 0x1b, },
 	{ "in_rx_error", 4, 0x1c, },
 	{ "in_fcs_error", 4, 0x1d, },
 	{ "out_octets", 8, 0x0e, },
 	{ "out_unicast", 4, 0x10, },
 	{ "out_broadcasts", 4, 0x13, },
 	{ "out_multicasts", 4, 0x12, },
 	{ "out_pause", 4, 0x15, },
 	{ "excessive", 4, 0x11, },
 	{ "collisions", 4, 0x1e, },
 	{ "deferred", 4, 0x05, },
 	{ "single", 4, 0x14, },
 	{ "multiple", 4, 0x17, },
 	{ "out_fcs_error", 4, 0x03, },
 	{ "late", 4, 0x1f, },
 	{ "hist_64bytes", 4, 0x08, },
 	{ "hist_65_127bytes", 4, 0x09, },
 	{ "hist_128_255bytes", 4, 0x0a, },
 	{ "hist_256_511bytes", 4, 0x0b, },
 	{ "hist_512_1023bytes", 4, 0x0c, },
 	{ "hist_1024_max_bytes", 4, 0x0d, },
 };

 static void
 mv88e6123_61_65_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
 {
 	mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
 			      mv88e6123_61_65_hw_stats, port, data);
 }

 static void
 mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds,
 				  int port, uint64_t *data)
 {
 	mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
 				    mv88e6123_61_65_hw_stats, port, data);
 }

 static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds)
 {
 	return ARRAY_SIZE(mv88e6123_61_65_hw_stats);
 }

 struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
 	.tag_protocol		= cpu_to_be16(ETH_P_EDSA),
 	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
 	.probe			= mv88e6123_61_65_probe,
 	.setup			= mv88e6123_61_65_setup,
 	.set_addr		= mv88e6xxx_set_addr_indirect,
 	.phy_read		= mv88e6123_61_65_phy_read,
 	.phy_write		= mv88e6123_61_65_phy_write,
 	.poll_link		= mv88e6xxx_poll_link,
 	.get_strings		= mv88e6123_61_65_get_strings,
 	.get_ethtool_stats	= mv88e6123_61_65_get_ethtool_stats,
 	.get_sset_count		= mv88e6123_61_65_get_sset_count,
 };

 MODULE_ALIAS("platform:mv88e6123");
 MODULE_ALIAS("platform:mv88e6161");
 MODULE_ALIAS("platform:mv88e6165");
	/*
	* net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
	* Copyright (c) 2008-2009 Marvell Semiconductor
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#include <linux/delay.h>
	#include <linux/jiffies.h>
	#include <linux/list.h>
	#include <linux/module.h>
	#include <linux/netdevice.h>
	#include <linux/phy.h>
	#include <net/dsa.h>
	#include "mv88e6xxx.h"

	static char mv88e6123_61_65_probe(struct mii_bus bus, int sw_addr)
	{
	int ret;

	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
	if (ret >= 0) {
	if (ret == 0x1212)
	return "Marvell 88E6123 (A1)";
	if (ret == 0x1213)
	return "Marvell 88E6123 (A2)";
	if ((ret & 0xfff0) == 0x1210)
	return "Marvell 88E6123";

	if (ret == 0x1612)
	return "Marvell 88E6161 (A1)";
	if (ret == 0x1613)
	return "Marvell 88E6161 (A2)";
	if ((ret & 0xfff0) == 0x1610)
	return "Marvell 88E6161";

	if (ret == 0x1652)
	return "Marvell 88E6165 (A1)";
	if (ret == 0x1653)
	return "Marvell 88e6165 (A2)";
	if ((ret & 0xfff0) == 0x1650)
	return "Marvell 88E6165";
	}

	return NULL;
	}

	static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
	{
	int i;
	int ret;
	unsigned long timeout;

	/* Set all ports to the disabled state. */
	for (i = 0; i < 8; i++) {
	ret = REG_READ(REG_PORT(i), 0x04);
	REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
	}

	/* Wait for transmit queues to drain. */
	usleep_range(2000, 4000);

	/* Reset the switch. */
	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);

	/* Wait up to one second for reset to complete. */
	timeout = jiffies + 1 * HZ;
	while (time_before(jiffies, timeout)) {
	ret = REG_READ(REG_GLOBAL, 0x00);
	if ((ret & 0xc800) == 0xc800)
	break;

	usleep_range(1000, 2000);
	}
	if (time_after(jiffies, timeout))
	return -ETIMEDOUT;

	return 0;
	}

	static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
	{
	int ret;
	int i;

	/* Disable the PHY polling unit (since there won't be any
	* external PHYs to poll), don't discard packets with
	* excessive collisions, and mask all interrupt sources.
	*/
	REG_WRITE(REG_GLOBAL, 0x04, 0x0000);

	/* Set the default address aging time to 5 minutes, and
	* enable address learn messages to be sent to all message
	* ports.
	*/
	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);

	/* Configure the priority mapping registers. */
	ret = mv88e6xxx_config_prio(ds);
	if (ret < 0)
	return ret;

	/* Configure the upstream port, and configure the upstream
	* port as the port to which ingress and egress monitor frames
	* are to be sent.
	*/
	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));

	/* Disable remote management for now, and set the switch's
	* DSA device number.
	*/
	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);

	/* Send all frames with destination addresses matching
	* 01:80:c2:00:00:2x to the CPU port.
	*/
	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);

	/* Send all frames with destination addresses matching
	* 01:80:c2:00:00:0x to the CPU port.
	*/
	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);

	/* Disable the loopback filter, disable flow control
	* messages, disable flood broadcast override, disable
	* removing of provider tags, disable ATU age violation
	* interrupts, disable tag flow control, force flow
	* control priority to the highest, and send all special
	* multicast frames to the CPU at the highest priority.
	*/
	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);

	/* Program the DSA routing table. */
	for (i = 0; i < 32; i++) {
	int nexthop;

	nexthop = 0x1f;
	if (i != ds->index && i < ds->dst->pd->nr_chips)
	nexthop = ds->pd->rtable[i] & 0x1f;

	REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 \| (i << 8) \| nexthop);
	}

	/* Clear all trunk masks. */
	for (i = 0; i < 8; i++)
	REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 \| (i << 12) \| 0xff);

	/* Clear all trunk mappings. */
	for (i = 0; i < 16; i++)
	REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 \| (i << 11));

	/* Disable ingress rate limiting by resetting all ingress
	* rate limit registers to their initial state.
	*/
	for (i = 0; i < 6; i++)
	REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 \| (i << 8));

	/* Initialise cross-chip port VLAN table to reset defaults. */
	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);

	/* Clear the priority override table. */
	for (i = 0; i < 16; i++)
	REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 \| (i << 8));

	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */

	return 0;
	}

	static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
	{
	int addr = REG_PORT(p);
	u16 val;

	/* MAC Forcing register: don't force link, speed, duplex
	* or flow control state to any particular values on physical
	* ports, but force the CPU port and all DSA ports to 1000 Mb/s
	* full duplex.
	*/
	if (dsa_is_cpu_port(ds, p) \|\| ds->dsa_port_mask & (1 << p))
	REG_WRITE(addr, 0x01, 0x003e);
	else
	REG_WRITE(addr, 0x01, 0x0003);

	/* Do not limit the period of time that this port can be
	* paused for by the remote end or the period of time that
	* this port can pause the remote end.
	*/
	REG_WRITE(addr, 0x02, 0x0000);

	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
	* disable Header mode, enable IGMP/MLD snooping, disable VLAN
	* tunneling, determine priority by looking at 802.1p and IP
	* priority fields (IP prio has precedence), and set STP state
	* to Forwarding.
	*
	* If this is the CPU link, use DSA or EDSA tagging depending
	* on which tagging mode was configured.
	*
	* If this is a link to another switch, use DSA tagging mode.
	*
	* If this is the upstream port for this switch, enable
	* forwarding of unknown unicasts and multicasts.
	*/
	val = 0x0433;
	if (dsa_is_cpu_port(ds, p)) {
	if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
	val \|= 0x3300;
	else
	val \|= 0x0100;
	}
	if (ds->dsa_port_mask & (1 << p))
	val \|= 0x0100;
	if (p == dsa_upstream_port(ds))
	val \|= 0x000c;
	REG_WRITE(addr, 0x04, val);

	/* Port Control 1: disable trunking. Also, if this is the
	* CPU port, enable learn messages to be sent to this port.
	*/
	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);

	/* Port based VLAN map: give each port its own address
	* database, allow the CPU port to talk to each of the 'real'
	* ports, and allow each of the 'real' ports to only talk to
	* the upstream port.
	*/
	val = (p & 0xf) << 12;
	if (dsa_is_cpu_port(ds, p))
	val \|= ds->phys_port_mask;
	else
	val \|= 1 << dsa_upstream_port(ds);
	REG_WRITE(addr, 0x06, val);

	/* Default VLAN ID and priority: don't set a default VLAN
	* ID, and set the default packet priority to zero.
	*/
	REG_WRITE(addr, 0x07, 0x0000);

	/* Port Control 2: don't force a good FCS, set the maximum
	* frame size to 10240 bytes, don't let the switch add or
	* strip 802.1q tags, don't discard tagged or untagged frames
	* on this port, do a destination address lookup on all
	* received packets as usual, disable ARP mirroring and don't
	* send a copy of all transmitted/received frames on this port
	* to the CPU.
	*/
	REG_WRITE(addr, 0x08, 0x2080);

	/* Egress rate control: disable egress rate control. */
	REG_WRITE(addr, 0x09, 0x0001);

	/* Egress rate control 2: disable egress rate control. */
	REG_WRITE(addr, 0x0a, 0x0000);

	/* Port Association Vector: when learning source addresses
	* of packets, add the address to the address database using
	* a port bitmap that has only the bit for this port set and
	* the other bits clear.
	*/
	REG_WRITE(addr, 0x0b, 1 << p);

	/* Port ATU control: disable limiting the number of address
	* database entries that this port is allowed to use.
	*/
	REG_WRITE(addr, 0x0c, 0x0000);

	/* Priority Override: disable DA, SA and VTU priority override. */
	REG_WRITE(addr, 0x0d, 0x0000);

	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
	REG_WRITE(addr, 0x0f, ETH_P_EDSA);

	/* Tag Remap: use an identity 802.1p prio -> switch prio
	* mapping.
	*/
	REG_WRITE(addr, 0x18, 0x3210);

	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
	* mapping.
	*/
	REG_WRITE(addr, 0x19, 0x7654);

	return 0;
	}

	static int mv88e6123_61_65_setup(struct dsa_switch *ds)
	{
	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
	int i;
	int ret;

	mutex_init(&ps->smi_mutex);
	mutex_init(&ps->stats_mutex);

	ret = mv88e6123_61_65_switch_reset(ds);
	if (ret < 0)
	return ret;

	/* @@@ initialise vtu and atu */

	ret = mv88e6123_61_65_setup_global(ds);
	if (ret < 0)
	return ret;

	for (i = 0; i < 6; i++) {
	ret = mv88e6123_61_65_setup_port(ds, i);
	if (ret < 0)
	return ret;
	}

	return 0;
	}

	static int mv88e6123_61_65_port_to_phy_addr(int port)
	{
	if (port >= 0 && port <= 4)
	return port;
	return -1;
	}

	static int
	mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum)
	{
	int addr = mv88e6123_61_65_port_to_phy_addr(port);
	return mv88e6xxx_phy_read(ds, addr, regnum);
	}

	static int
	mv88e6123_61_65_phy_write(struct dsa_switch *ds,
	int port, int regnum, u16 val)
	{
	int addr = mv88e6123_61_65_port_to_phy_addr(port);
	return mv88e6xxx_phy_write(ds, addr, regnum, val);
	}

	static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = {
	{ "in_good_octets", 8, 0x00, },
	{ "in_bad_octets", 4, 0x02, },
	{ "in_unicast", 4, 0x04, },
	{ "in_broadcasts", 4, 0x06, },
	{ "in_multicasts", 4, 0x07, },
	{ "in_pause", 4, 0x16, },
	{ "in_undersize", 4, 0x18, },
	{ "in_fragments", 4, 0x19, },
	{ "in_oversize", 4, 0x1a, },
	{ "in_jabber", 4, 0x1b, },
	{ "in_rx_error", 4, 0x1c, },
	{ "in_fcs_error", 4, 0x1d, },
	{ "out_octets", 8, 0x0e, },
	{ "out_unicast", 4, 0x10, },
	{ "out_broadcasts", 4, 0x13, },
	{ "out_multicasts", 4, 0x12, },
	{ "out_pause", 4, 0x15, },
	{ "excessive", 4, 0x11, },
	{ "collisions", 4, 0x1e, },
	{ "deferred", 4, 0x05, },
	{ "single", 4, 0x14, },
	{ "multiple", 4, 0x17, },
	{ "out_fcs_error", 4, 0x03, },
	{ "late", 4, 0x1f, },
	{ "hist_64bytes", 4, 0x08, },
	{ "hist_65_127bytes", 4, 0x09, },
	{ "hist_128_255bytes", 4, 0x0a, },
	{ "hist_256_511bytes", 4, 0x0b, },
	{ "hist_512_1023bytes", 4, 0x0c, },
	{ "hist_1024_max_bytes", 4, 0x0d, },
	};

	static void
	mv88e6123_61_65_get_strings(struct dsa_switch ds, int port, uint8_t data)
	{
	mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
	mv88e6123_61_65_hw_stats, port, data);
	}

	static void
	mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds,
	int port, uint64_t *data)
	{
	mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats),
	mv88e6123_61_65_hw_stats, port, data);
	}

	static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds)
	{
	return ARRAY_SIZE(mv88e6123_61_65_hw_stats);
	}

	struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
	.tag_protocol = cpu_to_be16(ETH_P_EDSA),
	.priv_size = sizeof(struct mv88e6xxx_priv_state),
	.probe = mv88e6123_61_65_probe,
	.setup = mv88e6123_61_65_setup,
	.set_addr = mv88e6xxx_set_addr_indirect,
	.phy_read = mv88e6123_61_65_phy_read,
	.phy_write = mv88e6123_61_65_phy_write,
	.poll_link = mv88e6xxx_poll_link,
	.get_strings = mv88e6123_61_65_get_strings,
	.get_ethtool_stats = mv88e6123_61_65_get_ethtool_stats,
	.get_sset_count = mv88e6123_61_65_get_sset_count,
	};

	MODULE_ALIAS("platform:mv88e6123");
	MODULE_ALIAS("platform:mv88e6161");
	MODULE_ALIAS("platform:mv88e6165");