| /* | 
 |  * linux/kernel/power/swap.c | 
 |  * | 
 |  * This file provides functions for reading the suspend image from | 
 |  * and writing it to a swap partition. | 
 |  * | 
 |  * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> | 
 |  * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> | 
 |  * | 
 |  * This file is released under the GPLv2. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/file.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/genhd.h> | 
 | #include <linux/device.h> | 
 | #include <linux/buffer_head.h> | 
 | #include <linux/bio.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/swap.h> | 
 | #include <linux/swapops.h> | 
 | #include <linux/pm.h> | 
 |  | 
 | #include "power.h" | 
 |  | 
 | #define SWSUSP_SIG	"S1SUSPEND" | 
 |  | 
 | struct swsusp_header { | 
 | 	char reserved[PAGE_SIZE - 20 - sizeof(sector_t) - sizeof(int)]; | 
 | 	sector_t image; | 
 | 	unsigned int flags;	/* Flags to pass to the "boot" kernel */ | 
 | 	char	orig_sig[10]; | 
 | 	char	sig[10]; | 
 | } __attribute__((packed)); | 
 |  | 
 | static struct swsusp_header *swsusp_header; | 
 |  | 
 | /** | 
 |  *	The following functions are used for tracing the allocated | 
 |  *	swap pages, so that they can be freed in case of an error. | 
 |  */ | 
 |  | 
 | struct swsusp_extent { | 
 | 	struct rb_node node; | 
 | 	unsigned long start; | 
 | 	unsigned long end; | 
 | }; | 
 |  | 
 | static struct rb_root swsusp_extents = RB_ROOT; | 
 |  | 
 | static int swsusp_extents_insert(unsigned long swap_offset) | 
 | { | 
 | 	struct rb_node **new = &(swsusp_extents.rb_node); | 
 | 	struct rb_node *parent = NULL; | 
 | 	struct swsusp_extent *ext; | 
 |  | 
 | 	/* Figure out where to put the new node */ | 
 | 	while (*new) { | 
 | 		ext = container_of(*new, struct swsusp_extent, node); | 
 | 		parent = *new; | 
 | 		if (swap_offset < ext->start) { | 
 | 			/* Try to merge */ | 
 | 			if (swap_offset == ext->start - 1) { | 
 | 				ext->start--; | 
 | 				return 0; | 
 | 			} | 
 | 			new = &((*new)->rb_left); | 
 | 		} else if (swap_offset > ext->end) { | 
 | 			/* Try to merge */ | 
 | 			if (swap_offset == ext->end + 1) { | 
 | 				ext->end++; | 
 | 				return 0; | 
 | 			} | 
 | 			new = &((*new)->rb_right); | 
 | 		} else { | 
 | 			/* It already is in the tree */ | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 | 	/* Add the new node and rebalance the tree. */ | 
 | 	ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL); | 
 | 	if (!ext) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ext->start = swap_offset; | 
 | 	ext->end = swap_offset; | 
 | 	rb_link_node(&ext->node, parent, new); | 
 | 	rb_insert_color(&ext->node, &swsusp_extents); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	alloc_swapdev_block - allocate a swap page and register that it has | 
 |  *	been allocated, so that it can be freed in case of an error. | 
 |  */ | 
 |  | 
 | sector_t alloc_swapdev_block(int swap) | 
 | { | 
 | 	unsigned long offset; | 
 |  | 
 | 	offset = swp_offset(get_swap_page_of_type(swap)); | 
 | 	if (offset) { | 
 | 		if (swsusp_extents_insert(offset)) | 
 | 			swap_free(swp_entry(swap, offset)); | 
 | 		else | 
 | 			return swapdev_block(swap, offset); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	free_all_swap_pages - free swap pages allocated for saving image data. | 
 |  *	It also frees the extents used to register which swap entres had been | 
 |  *	allocated. | 
 |  */ | 
 |  | 
 | void free_all_swap_pages(int swap) | 
 | { | 
 | 	struct rb_node *node; | 
 |  | 
 | 	while ((node = swsusp_extents.rb_node)) { | 
 | 		struct swsusp_extent *ext; | 
 | 		unsigned long offset; | 
 |  | 
 | 		ext = container_of(node, struct swsusp_extent, node); | 
 | 		rb_erase(node, &swsusp_extents); | 
 | 		for (offset = ext->start; offset <= ext->end; offset++) | 
 | 			swap_free(swp_entry(swap, offset)); | 
 |  | 
 | 		kfree(ext); | 
 | 	} | 
 | } | 
 |  | 
 | int swsusp_swap_in_use(void) | 
 | { | 
 | 	return (swsusp_extents.rb_node != NULL); | 
 | } | 
 |  | 
 | /* | 
 |  * General things | 
 |  */ | 
 |  | 
 | static unsigned short root_swap = 0xffff; | 
 | static struct block_device *resume_bdev; | 
 |  | 
 | /** | 
 |  *	submit - submit BIO request. | 
 |  *	@rw:	READ or WRITE. | 
 |  *	@off	physical offset of page. | 
 |  *	@page:	page we're reading or writing. | 
 |  *	@bio_chain: list of pending biod (for async reading) | 
 |  * | 
 |  *	Straight from the textbook - allocate and initialize the bio. | 
 |  *	If we're reading, make sure the page is marked as dirty. | 
 |  *	Then submit it and, if @bio_chain == NULL, wait. | 
 |  */ | 
 | static int submit(int rw, pgoff_t page_off, struct page *page, | 
 | 			struct bio **bio_chain) | 
 | { | 
 | 	const int bio_rw = rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); | 
 | 	struct bio *bio; | 
 |  | 
 | 	bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); | 
 | 	bio->bi_sector = page_off * (PAGE_SIZE >> 9); | 
 | 	bio->bi_bdev = resume_bdev; | 
 | 	bio->bi_end_io = end_swap_bio_read; | 
 |  | 
 | 	if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { | 
 | 		printk(KERN_ERR "PM: Adding page to bio failed at %ld\n", | 
 | 			page_off); | 
 | 		bio_put(bio); | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	lock_page(page); | 
 | 	bio_get(bio); | 
 |  | 
 | 	if (bio_chain == NULL) { | 
 | 		submit_bio(bio_rw, bio); | 
 | 		wait_on_page_locked(page); | 
 | 		if (rw == READ) | 
 | 			bio_set_pages_dirty(bio); | 
 | 		bio_put(bio); | 
 | 	} else { | 
 | 		if (rw == READ) | 
 | 			get_page(page);	/* These pages are freed later */ | 
 | 		bio->bi_private = *bio_chain; | 
 | 		*bio_chain = bio; | 
 | 		submit_bio(bio_rw, bio); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int bio_read_page(pgoff_t page_off, void *addr, struct bio **bio_chain) | 
 | { | 
 | 	return submit(READ, page_off, virt_to_page(addr), bio_chain); | 
 | } | 
 |  | 
 | static int bio_write_page(pgoff_t page_off, void *addr, struct bio **bio_chain) | 
 | { | 
 | 	return submit(WRITE, page_off, virt_to_page(addr), bio_chain); | 
 | } | 
 |  | 
 | static int wait_on_bio_chain(struct bio **bio_chain) | 
 | { | 
 | 	struct bio *bio; | 
 | 	struct bio *next_bio; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (bio_chain == NULL) | 
 | 		return 0; | 
 |  | 
 | 	bio = *bio_chain; | 
 | 	if (bio == NULL) | 
 | 		return 0; | 
 | 	while (bio) { | 
 | 		struct page *page; | 
 |  | 
 | 		next_bio = bio->bi_private; | 
 | 		page = bio->bi_io_vec[0].bv_page; | 
 | 		wait_on_page_locked(page); | 
 | 		if (!PageUptodate(page) || PageError(page)) | 
 | 			ret = -EIO; | 
 | 		put_page(page); | 
 | 		bio_put(bio); | 
 | 		bio = next_bio; | 
 | 	} | 
 | 	*bio_chain = NULL; | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Saving part | 
 |  */ | 
 |  | 
 | static int mark_swapfiles(sector_t start, unsigned int flags) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	bio_read_page(swsusp_resume_block, swsusp_header, NULL); | 
 | 	if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) || | 
 | 	    !memcmp("SWAPSPACE2",swsusp_header->sig, 10)) { | 
 | 		memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10); | 
 | 		memcpy(swsusp_header->sig,SWSUSP_SIG, 10); | 
 | 		swsusp_header->image = start; | 
 | 		swsusp_header->flags = flags; | 
 | 		error = bio_write_page(swsusp_resume_block, | 
 | 					swsusp_header, NULL); | 
 | 	} else { | 
 | 		printk(KERN_ERR "PM: Swap header not found!\n"); | 
 | 		error = -ENODEV; | 
 | 	} | 
 | 	return error; | 
 | } | 
 |  | 
 | /** | 
 |  *	swsusp_swap_check - check if the resume device is a swap device | 
 |  *	and get its index (if so) | 
 |  */ | 
 |  | 
 | static int swsusp_swap_check(void) /* This is called before saving image */ | 
 | { | 
 | 	int res; | 
 |  | 
 | 	res = swap_type_of(swsusp_resume_device, swsusp_resume_block, | 
 | 			&resume_bdev); | 
 | 	if (res < 0) | 
 | 		return res; | 
 |  | 
 | 	root_swap = res; | 
 | 	res = blkdev_get(resume_bdev, FMODE_WRITE); | 
 | 	if (res) | 
 | 		return res; | 
 |  | 
 | 	res = set_blocksize(resume_bdev, PAGE_SIZE); | 
 | 	if (res < 0) | 
 | 		blkdev_put(resume_bdev, FMODE_WRITE); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | /** | 
 |  *	write_page - Write one page to given swap location. | 
 |  *	@buf:		Address we're writing. | 
 |  *	@offset:	Offset of the swap page we're writing to. | 
 |  *	@bio_chain:	Link the next write BIO here | 
 |  */ | 
 |  | 
 | static int write_page(void *buf, sector_t offset, struct bio **bio_chain) | 
 | { | 
 | 	void *src; | 
 |  | 
 | 	if (!offset) | 
 | 		return -ENOSPC; | 
 |  | 
 | 	if (bio_chain) { | 
 | 		src = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH); | 
 | 		if (src) { | 
 | 			memcpy(src, buf, PAGE_SIZE); | 
 | 		} else { | 
 | 			WARN_ON_ONCE(1); | 
 | 			bio_chain = NULL;	/* Go synchronous */ | 
 | 			src = buf; | 
 | 		} | 
 | 	} else { | 
 | 		src = buf; | 
 | 	} | 
 | 	return bio_write_page(offset, src, bio_chain); | 
 | } | 
 |  | 
 | /* | 
 |  *	The swap map is a data structure used for keeping track of each page | 
 |  *	written to a swap partition.  It consists of many swap_map_page | 
 |  *	structures that contain each an array of MAP_PAGE_SIZE swap entries. | 
 |  *	These structures are stored on the swap and linked together with the | 
 |  *	help of the .next_swap member. | 
 |  * | 
 |  *	The swap map is created during suspend.  The swap map pages are | 
 |  *	allocated and populated one at a time, so we only need one memory | 
 |  *	page to set up the entire structure. | 
 |  * | 
 |  *	During resume we also only need to use one swap_map_page structure | 
 |  *	at a time. | 
 |  */ | 
 |  | 
 | #define MAP_PAGE_ENTRIES	(PAGE_SIZE / sizeof(sector_t) - 1) | 
 |  | 
 | struct swap_map_page { | 
 | 	sector_t entries[MAP_PAGE_ENTRIES]; | 
 | 	sector_t next_swap; | 
 | }; | 
 |  | 
 | /** | 
 |  *	The swap_map_handle structure is used for handling swap in | 
 |  *	a file-alike way | 
 |  */ | 
 |  | 
 | struct swap_map_handle { | 
 | 	struct swap_map_page *cur; | 
 | 	sector_t cur_swap; | 
 | 	unsigned int k; | 
 | }; | 
 |  | 
 | static void release_swap_writer(struct swap_map_handle *handle) | 
 | { | 
 | 	if (handle->cur) | 
 | 		free_page((unsigned long)handle->cur); | 
 | 	handle->cur = NULL; | 
 | } | 
 |  | 
 | static int get_swap_writer(struct swap_map_handle *handle) | 
 | { | 
 | 	handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL); | 
 | 	if (!handle->cur) | 
 | 		return -ENOMEM; | 
 | 	handle->cur_swap = alloc_swapdev_block(root_swap); | 
 | 	if (!handle->cur_swap) { | 
 | 		release_swap_writer(handle); | 
 | 		return -ENOSPC; | 
 | 	} | 
 | 	handle->k = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int swap_write_page(struct swap_map_handle *handle, void *buf, | 
 | 				struct bio **bio_chain) | 
 | { | 
 | 	int error = 0; | 
 | 	sector_t offset; | 
 |  | 
 | 	if (!handle->cur) | 
 | 		return -EINVAL; | 
 | 	offset = alloc_swapdev_block(root_swap); | 
 | 	error = write_page(buf, offset, bio_chain); | 
 | 	if (error) | 
 | 		return error; | 
 | 	handle->cur->entries[handle->k++] = offset; | 
 | 	if (handle->k >= MAP_PAGE_ENTRIES) { | 
 | 		error = wait_on_bio_chain(bio_chain); | 
 | 		if (error) | 
 | 			goto out; | 
 | 		offset = alloc_swapdev_block(root_swap); | 
 | 		if (!offset) | 
 | 			return -ENOSPC; | 
 | 		handle->cur->next_swap = offset; | 
 | 		error = write_page(handle->cur, handle->cur_swap, NULL); | 
 | 		if (error) | 
 | 			goto out; | 
 | 		memset(handle->cur, 0, PAGE_SIZE); | 
 | 		handle->cur_swap = offset; | 
 | 		handle->k = 0; | 
 | 	} | 
 |  out: | 
 | 	return error; | 
 | } | 
 |  | 
 | static int flush_swap_writer(struct swap_map_handle *handle) | 
 | { | 
 | 	if (handle->cur && handle->cur_swap) | 
 | 		return write_page(handle->cur, handle->cur_swap, NULL); | 
 | 	else | 
 | 		return -EINVAL; | 
 | } | 
 |  | 
 | /** | 
 |  *	save_image - save the suspend image data | 
 |  */ | 
 |  | 
 | static int save_image(struct swap_map_handle *handle, | 
 |                       struct snapshot_handle *snapshot, | 
 |                       unsigned int nr_to_write) | 
 | { | 
 | 	unsigned int m; | 
 | 	int ret; | 
 | 	int nr_pages; | 
 | 	int err2; | 
 | 	struct bio *bio; | 
 | 	struct timeval start; | 
 | 	struct timeval stop; | 
 |  | 
 | 	printk(KERN_INFO "PM: Saving image data pages (%u pages) ...     ", | 
 | 		nr_to_write); | 
 | 	m = nr_to_write / 100; | 
 | 	if (!m) | 
 | 		m = 1; | 
 | 	nr_pages = 0; | 
 | 	bio = NULL; | 
 | 	do_gettimeofday(&start); | 
 | 	while (1) { | 
 | 		ret = snapshot_read_next(snapshot, PAGE_SIZE); | 
 | 		if (ret <= 0) | 
 | 			break; | 
 | 		ret = swap_write_page(handle, data_of(*snapshot), &bio); | 
 | 		if (ret) | 
 | 			break; | 
 | 		if (!(nr_pages % m)) | 
 | 			printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m); | 
 | 		nr_pages++; | 
 | 	} | 
 | 	err2 = wait_on_bio_chain(&bio); | 
 | 	do_gettimeofday(&stop); | 
 | 	if (!ret) | 
 | 		ret = err2; | 
 | 	if (!ret) | 
 | 		printk(KERN_CONT "\b\b\b\bdone\n"); | 
 | 	else | 
 | 		printk(KERN_CONT "\n"); | 
 | 	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  *	enough_swap - Make sure we have enough swap to save the image. | 
 |  * | 
 |  *	Returns TRUE or FALSE after checking the total amount of swap | 
 |  *	space avaiable from the resume partition. | 
 |  */ | 
 |  | 
 | static int enough_swap(unsigned int nr_pages) | 
 | { | 
 | 	unsigned int free_swap = count_swap_pages(root_swap, 1); | 
 |  | 
 | 	pr_debug("PM: Free swap pages: %u\n", free_swap); | 
 | 	return free_swap > nr_pages + PAGES_FOR_IO; | 
 | } | 
 |  | 
 | /** | 
 |  *	swsusp_write - Write entire image and metadata. | 
 |  *	@flags: flags to pass to the "boot" kernel in the image header | 
 |  * | 
 |  *	It is important _NOT_ to umount filesystems at this point. We want | 
 |  *	them synced (in case something goes wrong) but we DO not want to mark | 
 |  *	filesystem clean: it is not. (And it does not matter, if we resume | 
 |  *	correctly, we'll mark system clean, anyway.) | 
 |  */ | 
 |  | 
 | int swsusp_write(unsigned int flags) | 
 | { | 
 | 	struct swap_map_handle handle; | 
 | 	struct snapshot_handle snapshot; | 
 | 	struct swsusp_info *header; | 
 | 	int error; | 
 |  | 
 | 	error = swsusp_swap_check(); | 
 | 	if (error) { | 
 | 		printk(KERN_ERR "PM: Cannot find swap device, try " | 
 | 				"swapon -a.\n"); | 
 | 		return error; | 
 | 	} | 
 | 	memset(&snapshot, 0, sizeof(struct snapshot_handle)); | 
 | 	error = snapshot_read_next(&snapshot, PAGE_SIZE); | 
 | 	if (error < PAGE_SIZE) { | 
 | 		if (error >= 0) | 
 | 			error = -EFAULT; | 
 |  | 
 | 		goto out; | 
 | 	} | 
 | 	header = (struct swsusp_info *)data_of(snapshot); | 
 | 	if (!enough_swap(header->pages)) { | 
 | 		printk(KERN_ERR "PM: Not enough free swap\n"); | 
 | 		error = -ENOSPC; | 
 | 		goto out; | 
 | 	} | 
 | 	error = get_swap_writer(&handle); | 
 | 	if (!error) { | 
 | 		sector_t start = handle.cur_swap; | 
 |  | 
 | 		error = swap_write_page(&handle, header, NULL); | 
 | 		if (!error) | 
 | 			error = save_image(&handle, &snapshot, | 
 | 					header->pages - 1); | 
 |  | 
 | 		if (!error) { | 
 | 			flush_swap_writer(&handle); | 
 | 			printk(KERN_INFO "PM: S"); | 
 | 			error = mark_swapfiles(start, flags); | 
 | 			printk("|\n"); | 
 | 		} | 
 | 	} | 
 | 	if (error) | 
 | 		free_all_swap_pages(root_swap); | 
 |  | 
 | 	release_swap_writer(&handle); | 
 |  out: | 
 | 	swsusp_close(FMODE_WRITE); | 
 | 	return error; | 
 | } | 
 |  | 
 | /** | 
 |  *	The following functions allow us to read data using a swap map | 
 |  *	in a file-alike way | 
 |  */ | 
 |  | 
 | static void release_swap_reader(struct swap_map_handle *handle) | 
 | { | 
 | 	if (handle->cur) | 
 | 		free_page((unsigned long)handle->cur); | 
 | 	handle->cur = NULL; | 
 | } | 
 |  | 
 | static int get_swap_reader(struct swap_map_handle *handle, sector_t start) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	if (!start) | 
 | 		return -EINVAL; | 
 |  | 
 | 	handle->cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH); | 
 | 	if (!handle->cur) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	error = bio_read_page(start, handle->cur, NULL); | 
 | 	if (error) { | 
 | 		release_swap_reader(handle); | 
 | 		return error; | 
 | 	} | 
 | 	handle->k = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int swap_read_page(struct swap_map_handle *handle, void *buf, | 
 | 				struct bio **bio_chain) | 
 | { | 
 | 	sector_t offset; | 
 | 	int error; | 
 |  | 
 | 	if (!handle->cur) | 
 | 		return -EINVAL; | 
 | 	offset = handle->cur->entries[handle->k]; | 
 | 	if (!offset) | 
 | 		return -EFAULT; | 
 | 	error = bio_read_page(offset, buf, bio_chain); | 
 | 	if (error) | 
 | 		return error; | 
 | 	if (++handle->k >= MAP_PAGE_ENTRIES) { | 
 | 		error = wait_on_bio_chain(bio_chain); | 
 | 		handle->k = 0; | 
 | 		offset = handle->cur->next_swap; | 
 | 		if (!offset) | 
 | 			release_swap_reader(handle); | 
 | 		else if (!error) | 
 | 			error = bio_read_page(offset, handle->cur, NULL); | 
 | 	} | 
 | 	return error; | 
 | } | 
 |  | 
 | /** | 
 |  *	load_image - load the image using the swap map handle | 
 |  *	@handle and the snapshot handle @snapshot | 
 |  *	(assume there are @nr_pages pages to load) | 
 |  */ | 
 |  | 
 | static int load_image(struct swap_map_handle *handle, | 
 |                       struct snapshot_handle *snapshot, | 
 |                       unsigned int nr_to_read) | 
 | { | 
 | 	unsigned int m; | 
 | 	int error = 0; | 
 | 	struct timeval start; | 
 | 	struct timeval stop; | 
 | 	struct bio *bio; | 
 | 	int err2; | 
 | 	unsigned nr_pages; | 
 |  | 
 | 	printk(KERN_INFO "PM: Loading image data pages (%u pages) ...     ", | 
 | 		nr_to_read); | 
 | 	m = nr_to_read / 100; | 
 | 	if (!m) | 
 | 		m = 1; | 
 | 	nr_pages = 0; | 
 | 	bio = NULL; | 
 | 	do_gettimeofday(&start); | 
 | 	for ( ; ; ) { | 
 | 		error = snapshot_write_next(snapshot, PAGE_SIZE); | 
 | 		if (error <= 0) | 
 | 			break; | 
 | 		error = swap_read_page(handle, data_of(*snapshot), &bio); | 
 | 		if (error) | 
 | 			break; | 
 | 		if (snapshot->sync_read) | 
 | 			error = wait_on_bio_chain(&bio); | 
 | 		if (error) | 
 | 			break; | 
 | 		if (!(nr_pages % m)) | 
 | 			printk("\b\b\b\b%3d%%", nr_pages / m); | 
 | 		nr_pages++; | 
 | 	} | 
 | 	err2 = wait_on_bio_chain(&bio); | 
 | 	do_gettimeofday(&stop); | 
 | 	if (!error) | 
 | 		error = err2; | 
 | 	if (!error) { | 
 | 		printk("\b\b\b\bdone\n"); | 
 | 		snapshot_write_finalize(snapshot); | 
 | 		if (!snapshot_image_loaded(snapshot)) | 
 | 			error = -ENODATA; | 
 | 	} else | 
 | 		printk("\n"); | 
 | 	swsusp_show_speed(&start, &stop, nr_to_read, "Read"); | 
 | 	return error; | 
 | } | 
 |  | 
 | /** | 
 |  *	swsusp_read - read the hibernation image. | 
 |  *	@flags_p: flags passed by the "frozen" kernel in the image header should | 
 |  *		  be written into this memeory location | 
 |  */ | 
 |  | 
 | int swsusp_read(unsigned int *flags_p) | 
 | { | 
 | 	int error; | 
 | 	struct swap_map_handle handle; | 
 | 	struct snapshot_handle snapshot; | 
 | 	struct swsusp_info *header; | 
 |  | 
 | 	*flags_p = swsusp_header->flags; | 
 |  | 
 | 	memset(&snapshot, 0, sizeof(struct snapshot_handle)); | 
 | 	error = snapshot_write_next(&snapshot, PAGE_SIZE); | 
 | 	if (error < PAGE_SIZE) | 
 | 		return error < 0 ? error : -EFAULT; | 
 | 	header = (struct swsusp_info *)data_of(snapshot); | 
 | 	error = get_swap_reader(&handle, swsusp_header->image); | 
 | 	if (!error) | 
 | 		error = swap_read_page(&handle, header, NULL); | 
 | 	if (!error) | 
 | 		error = load_image(&handle, &snapshot, header->pages - 1); | 
 | 	release_swap_reader(&handle); | 
 |  | 
 | 	if (!error) | 
 | 		pr_debug("PM: Image successfully loaded\n"); | 
 | 	else | 
 | 		pr_debug("PM: Error %d resuming\n", error); | 
 | 	return error; | 
 | } | 
 |  | 
 | /** | 
 |  *      swsusp_check - Check for swsusp signature in the resume device | 
 |  */ | 
 |  | 
 | int swsusp_check(void) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); | 
 | 	if (!IS_ERR(resume_bdev)) { | 
 | 		set_blocksize(resume_bdev, PAGE_SIZE); | 
 | 		memset(swsusp_header, 0, PAGE_SIZE); | 
 | 		error = bio_read_page(swsusp_resume_block, | 
 | 					swsusp_header, NULL); | 
 | 		if (error) | 
 | 			goto put; | 
 |  | 
 | 		if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) { | 
 | 			memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10); | 
 | 			/* Reset swap signature now */ | 
 | 			error = bio_write_page(swsusp_resume_block, | 
 | 						swsusp_header, NULL); | 
 | 		} else { | 
 | 			error = -EINVAL; | 
 | 		} | 
 |  | 
 | put: | 
 | 		if (error) | 
 | 			blkdev_put(resume_bdev, FMODE_READ); | 
 | 		else | 
 | 			pr_debug("PM: Signature found, resuming\n"); | 
 | 	} else { | 
 | 		error = PTR_ERR(resume_bdev); | 
 | 	} | 
 |  | 
 | 	if (error) | 
 | 		pr_debug("PM: Error %d checking image file\n", error); | 
 |  | 
 | 	return error; | 
 | } | 
 |  | 
 | /** | 
 |  *	swsusp_close - close swap device. | 
 |  */ | 
 |  | 
 | void swsusp_close(fmode_t mode) | 
 | { | 
 | 	if (IS_ERR(resume_bdev)) { | 
 | 		pr_debug("PM: Image device not initialised\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	blkdev_put(resume_bdev, mode); | 
 | } | 
 |  | 
 | static int swsusp_header_init(void) | 
 | { | 
 | 	swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL); | 
 | 	if (!swsusp_header) | 
 | 		panic("Could not allocate memory for swsusp_header\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | core_initcall(swsusp_header_init); |