blob: b9ec668bfe6263de85f09ccd2eb06769849c0178 [file] [log] [blame]
Device Tree Clock bindings for arch-sunxi
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-a10-axi-clk" - for the AXI clock
"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
"allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
Required properties for all clocks:
- reg : shall be the control register address for the clock.
- clocks : shall be the input parent clock(s) phandle for the clock. For
multiplexed clocks, the list order must match the hardware
programming order.
- #clock-cells : from common clock binding; shall be set to 0 except for
"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk" and
"allwinner,sun4i-pll6-clk" where it shall be set to 1
- clock-output-names : shall be the corresponding names of the outputs.
If the clock module only has one output, the name shall be the
module name.
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
dummy clocks at 25 MHz and 125 MHz, respectively. See example.
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. This ID is the
offset of the bit controlling this particular gate in the register.
For example:
osc24M: clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clocks = <&osc24M_fixed>;
clock-output-names = "osc24M";
};
pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll1";
};
pll5: clk@01c20020 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>;
clock-output-names = "cpu";
};
mmc0_clk: clk@01c20088 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-mod0-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0";
};
mii_phy_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
gmac_int_tx_clk: clk@3 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_int_tx";
};
gmac_clk: clk@01c20164 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c20164 0x4>;
/*
* The first clock must be fixed at 25MHz;
* the second clock must be fixed at 125MHz
*/
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac";
};