blob: addd3f881ce2b6358cbfce34822e3273af714a63 [file] [log] [blame]
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q-pinfunc.h"
#include "imx6qdl.dtsi"
/ {
aliases {
spi4 = &ecspi5;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
1200000 1275000
996000 1250000
852000 1250000
792000 1150000
396000 975000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
1200000 1275000
996000 1250000
852000 1250000
792000 1175000
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks 104>, <&clks 6>, <&clks 16>,
<&clks 17>, <&clks 170>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;
};
cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
};
};
soc {
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x40000>;
clocks = <&clks 142>;
};
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 116>, <&clks 116>;
clock-names = "ipg", "per";
status = "disabled";
};
};
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
ipu2 {
pinctrl_ipu2_1: ipu2grp-1 {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10
MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10
MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000
MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10
MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10
MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10
MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10
MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10
MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10
MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10
MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10
MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10
MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10
MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10
MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10
MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10
MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10
MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10
MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10
MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10
MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10
MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10
MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10
MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10
MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10
MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10
MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10
>;
};
};
};
};
sata: sata@02200000 {
compatible = "fsl,imx6q-ahci";
reg = <0x02200000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 154>, <&clks 187>, <&clks 105>;
clock-names = "sata", "sata_ref", "ahb";
status = "disabled";
};
ipu2: ipu@02800000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
<0 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
ipu2_di0: port@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
ipu2_di0_disp0: endpoint@0 {
};
ipu2_di0_hdmi: endpoint@1 {
remote-endpoint = <&hdmi_mux_2>;
};
ipu2_di0_mipi: endpoint@2 {
};
ipu2_di0_lvds0: endpoint@3 {
remote-endpoint = <&lvds0_mux_2>;
};
ipu2_di0_lvds1: endpoint@4 {
remote-endpoint = <&lvds1_mux_2>;
};
};
ipu2_di1: port@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
ipu2_di1_hdmi: endpoint@1 {
remote-endpoint = <&hdmi_mux_3>;
};
ipu2_di1_mipi: endpoint@2 {
};
ipu2_di1_lvds0: endpoint@3 {
remote-endpoint = <&lvds0_mux_3>;
};
ipu2_di1_lvds1: endpoint@4 {
remote-endpoint = <&lvds1_mux_3>;
};
};
};
};
display-subsystem {
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
};
};
&hdmi {
compatible = "fsl,imx6q-hdmi";
port@2 {
reg = <2>;
hdmi_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_hdmi>;
};
};
port@3 {
reg = <3>;
hdmi_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_hdmi>;
};
};
};
&ldb {
clocks = <&clks 33>, <&clks 34>,
<&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>,
<&clks 135>, <&clks 136>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel", "di2_sel", "di3_sel",
"di0", "di1";
lvds-channel@0 {
port@2 {
reg = <2>;
lvds0_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_lvds0>;
};
};
port@3 {
reg = <3>;
lvds0_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_lvds0>;
};
};
};
lvds-channel@1 {
port@2 {
reg = <2>;
lvds1_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_lvds1>;
};
};
port@3 {
reg = <3>;
lvds1_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_lvds1>;
};
};
};
};
&mipi_dsi {
port@2 {
reg = <2>;
mipi_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_mipi>;
};
};
port@3 {
reg = <3>;
mipi_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_mipi>;
};
};
};