blob: 4e773b55bc2d4625fb41641a77895522d6a38d9b [file] [log] [blame]
* arch/arm/mach-at91/include/mach/board.h
* Copyright (C) 2005 HP Labs
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* These are data structures found in,
* and describing board-specific data needed by drivers. For example,
* which pin is used for a given GPIO role.
* In 2.6, drivers should strongly avoid board-specific knowledge so
* that supporting new boards normally won't require driver patches.
* Most board-specific knowledge should be in arch/.../board-*.c files.
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
#include <linux/platform_data/atmel.h>
/* USB Device */
extern void __init at91_add_device_udc(struct at91_udc_data *data);
/* USB High Speed Device */
extern void __init at91_add_device_usba(struct usba_platform_data *data);
/* Compact Flash */
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
/* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
extern void __init at91_add_device_nand(struct atmel_nand_data *data);
/* I2C*/
#if defined(CONFIG_ARCH_AT91SAM9G45)
extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
/* SPI */
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
/* Serial */
#define ATMEL_UART_CTS 0x01
#define ATMEL_UART_RTS 0x02
#define ATMEL_UART_DSR 0x04
#define ATMEL_UART_DTR 0x08
#define ATMEL_UART_DCD 0x10
#define ATMEL_UART_RI 0x20
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern struct platform_device *atmel_default_console_device;
extern void __init at91_add_device_serial(void);
#define AT91_PWM0 0
#define AT91_PWM1 1
#define AT91_PWM2 2
#define AT91_PWM3 3
extern void __init at91_add_device_pwm(u32 mask);
* SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
* platform devices. Their SSC ID is part of their configuration data,
* along with information about which SSC signals they should use.
#define ATMEL_SSC_TK 0x01
#define ATMEL_SSC_TF 0x02
#define ATMEL_SSC_TD 0x04
#define ATMEL_SSC_RK 0x10
#define ATMEL_SSC_RF 0x20
#define ATMEL_SSC_RD 0x40
extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
/* LCD Controller */
struct atmel_lcdfb_pdata;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);
/* AC97 */
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
struct isi_platform_data;
extern void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck);
/* CAN */
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);