blob: f5120046ff800a5433df4d52bce57ff589286ddf [file] [log] [blame]
#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig DRM
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
select HDMI
select I2C
select I2C_ALGOBIT
select DMA_SHARED_BUFFER
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
the module that's right for your graphics card from the list below.
These modules provide support for synchronization, security, and
DMA transfers. Please see <http://dri.sourceforge.net/> for more
details. You should also select and configure AGP
(/dev/agpgart) support if it is available for your platform.
config DRM_MIPI_DSI
bool
depends on DRM
config DRM_USB
tristate
depends on DRM
depends on USB_SUPPORT && USB_ARCH_HAS_HCD
select USB
config DRM_KMS_HELPER
tristate
depends on DRM
help
CRTC helpers for KMS drivers.
config DRM_KMS_FB_HELPER
bool
depends on DRM_KMS_HELPER
select FB
select FRAMEBUFFER_CONSOLE if !EXPERT
select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
help
FBDEV helpers for KMS drivers.
config DRM_LOAD_EDID_FIRMWARE
bool "Allow to specify an EDID data set instead of probing for it"
depends on DRM_KMS_HELPER
help
Say Y here, if you want to use EDID data to be loaded from the
/lib/firmware directory or one of the provided built-in
data sets. This may be necessary, if the graphics adapter or
monitor are unable to provide appropriate EDID data. Since this
feature is provided as a workaround for broken hardware, the
default case is N. Details and instructions how to build your own
EDID data are given in Documentation/EDID/HOWTO.txt.
config DRM_TTM
tristate
depends on DRM
help
GPU memory management subsystem for devices with multiple
GPU memory types. Will be enabled automatically if a device driver
uses it.
config DRM_GEM_CMA_HELPER
bool
depends on DRM
help
Choose this if you need the GEM CMA helper functions
config DRM_KMS_CMA_HELPER
bool
select DRM_GEM_CMA_HELPER
select DRM_KMS_FB_HELPER
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
help
Choose this if you need the KMS CMA helper functions
source "drivers/gpu/drm/i2c/Kconfig"
source "drivers/gpu/drm/bridge/Kconfig"
config DRM_TDFX
tristate "3dfx Banshee/Voodoo3+"
depends on DRM && PCI
help
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
graphics card. If M is selected, the module will be called tdfx.
config DRM_R128
tristate "ATI Rage 128"
depends on DRM && PCI
select FW_LOADER
help
Choose this option if you have an ATI Rage 128 graphics card. If M
is selected, the module will be called r128. AGP support for
this card is strongly suggested (unless you have a PCI version).
config DRM_RADEON
tristate "ATI Radeon"
depends on DRM && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FW_LOADER
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
select DRM_TTM
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
help
Choose this option if you have an ATI Radeon graphics card. There
are both PCI and AGP versions. You don't need to choose this to
run the Radeon in plain VGA mode.
If M is selected, the module will be called radeon.
source "drivers/gpu/drm/radeon/Kconfig"
source "drivers/gpu/drm/nouveau/Kconfig"
config DRM_I810
tristate "Intel I810"
# !PREEMPT because of missing ioctl locking
depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
help
Choose this option if you have an Intel I810 graphics card. If M is
selected, the module will be called i810. AGP support is required
for this driver to work.
source "drivers/gpu/drm/i915/Kconfig"
config DRM_MGA
tristate "Matrox g200/g400"
depends on DRM && PCI
select FW_LOADER
help
Choose this option if you have a Matrox G200, G400 or G450 graphics
card. If M is selected, the module will be called mga. AGP
support is required for this driver to work.
config DRM_SIS
tristate "SiS video cards"
depends on DRM && AGP
depends on FB_SIS || FB_SIS=n
help
Choose this option if you have a SiS 630 or compatible video
chipset. If M is selected the module will be called sis. AGP
support is required for this driver to work.
config DRM_VIA
tristate "Via unichrome video cards"
depends on DRM && PCI
help
Choose this option if you have a Via unichrome or compatible video
chipset. If M is selected the module will be called via.
config DRM_SAVAGE
tristate "Savage video cards"
depends on DRM && PCI
help
Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
chipset. If M is selected the module will be called savage.
source "drivers/gpu/drm/exynos/Kconfig"
source "drivers/gpu/drm/vmwgfx/Kconfig"
source "drivers/gpu/drm/gma500/Kconfig"
source "drivers/gpu/drm/udl/Kconfig"
source "drivers/gpu/drm/ast/Kconfig"
source "drivers/gpu/drm/mgag200/Kconfig"
source "drivers/gpu/drm/cirrus/Kconfig"
source "drivers/gpu/drm/armada/Kconfig"
source "drivers/gpu/drm/rcar-du/Kconfig"
source "drivers/gpu/drm/shmobile/Kconfig"
source "drivers/gpu/drm/omapdrm/Kconfig"
source "drivers/gpu/drm/tilcdc/Kconfig"
source "drivers/gpu/drm/qxl/Kconfig"
source "drivers/gpu/drm/bochs/Kconfig"
source "drivers/gpu/drm/msm/Kconfig"
source "drivers/gpu/drm/tegra/Kconfig"
source "drivers/gpu/drm/panel/Kconfig"