blob: 0069292224815ecc32f9672b68dc8f911e5bec9e [file] [log] [blame]
/*
*
* Intel Management Engine Interface (Intel MEI) Linux driver
* Copyright (c) 2003-2012, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <linux/mei.h>
#include "mei_dev.h"
#include "hbm.h"
#include "client.h"
const char *mei_dev_state_str(int state)
{
#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
switch (state) {
MEI_DEV_STATE(INITIALIZING);
MEI_DEV_STATE(INIT_CLIENTS);
MEI_DEV_STATE(ENABLED);
MEI_DEV_STATE(RESETTING);
MEI_DEV_STATE(DISABLED);
MEI_DEV_STATE(POWER_DOWN);
MEI_DEV_STATE(POWER_UP);
default:
return "unknown";
}
#undef MEI_DEV_STATE
}
/**
* mei_cancel_work. Cancel mei background jobs
*
* @dev: the device structure
*
* returns 0 on success or < 0 if the reset hasn't succeeded
*/
void mei_cancel_work(struct mei_device *dev)
{
cancel_work_sync(&dev->init_work);
cancel_work_sync(&dev->reset_work);
cancel_delayed_work(&dev->timer_work);
}
EXPORT_SYMBOL_GPL(mei_cancel_work);
/**
* mei_reset - resets host and fw.
*
* @dev: the device structure
*/
int mei_reset(struct mei_device *dev)
{
enum mei_dev_state state = dev->dev_state;
bool interrupts_enabled;
int ret;
if (state != MEI_DEV_INITIALIZING &&
state != MEI_DEV_DISABLED &&
state != MEI_DEV_POWER_DOWN &&
state != MEI_DEV_POWER_UP) {
struct mei_fw_status fw_status;
mei_fw_status(dev, &fw_status);
dev_warn(&dev->pdev->dev,
"unexpected reset: dev_state = %s " FW_STS_FMT "\n",
mei_dev_state_str(state), FW_STS_PRM(fw_status));
}
/* we're already in reset, cancel the init timer
* if the reset was called due the hbm protocol error
* we need to call it before hw start
* so the hbm watchdog won't kick in
*/
mei_hbm_idle(dev);
/* enter reset flow */
interrupts_enabled = state != MEI_DEV_POWER_DOWN;
dev->dev_state = MEI_DEV_RESETTING;
dev->reset_count++;
if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
dev_err(&dev->pdev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
dev->dev_state = MEI_DEV_DISABLED;
return -ENODEV;
}
ret = mei_hw_reset(dev, interrupts_enabled);
/* fall through and remove the sw state even if hw reset has failed */
/* no need to clean up software state in case of power up */
if (state != MEI_DEV_INITIALIZING &&
state != MEI_DEV_POWER_UP) {
/* remove all waiting requests */
mei_cl_all_write_clear(dev);
mei_cl_all_disconnect(dev);
/* wake up all readers and writers so they can be interrupted */
mei_cl_all_wakeup(dev);
/* remove entry if already in list */
dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
mei_cl_unlink(&dev->wd_cl);
mei_cl_unlink(&dev->iamthif_cl);
mei_amthif_reset_params(dev);
}
mei_hbm_reset(dev);
dev->rd_msg_hdr = 0;
dev->wd_pending = false;
if (ret) {
dev_err(&dev->pdev->dev, "hw_reset failed ret = %d\n", ret);
return ret;
}
if (state == MEI_DEV_POWER_DOWN) {
dev_dbg(&dev->pdev->dev, "powering down: end of reset\n");
dev->dev_state = MEI_DEV_DISABLED;
return 0;
}
ret = mei_hw_start(dev);
if (ret) {
dev_err(&dev->pdev->dev, "hw_start failed ret = %d\n", ret);
return ret;
}
dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n");
dev->dev_state = MEI_DEV_INIT_CLIENTS;
ret = mei_hbm_start_req(dev);
if (ret) {
dev_err(&dev->pdev->dev, "hbm_start failed ret = %d\n", ret);
dev->dev_state = MEI_DEV_RESETTING;
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(mei_reset);
/**
* mei_start - initializes host and fw to start work.
*
* @dev: the device structure
*
* returns 0 on success, <0 on failure.
*/
int mei_start(struct mei_device *dev)
{
int ret;
mutex_lock(&dev->device_lock);
/* acknowledge interrupt and stop interrupts */
mei_clear_interrupts(dev);
mei_hw_config(dev);
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
dev->reset_count = 0;
do {
dev->dev_state = MEI_DEV_INITIALIZING;
ret = mei_reset(dev);
if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "reset failed ret = %d", ret);
goto err;
}
} while (ret);
/* we cannot start the device w/o hbm start message completed */
if (dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "reset failed");
goto err;
}
if (mei_hbm_start_wait(dev)) {
dev_err(&dev->pdev->dev, "HBM haven't started");
goto err;
}
if (!mei_host_is_ready(dev)) {
dev_err(&dev->pdev->dev, "host is not ready.\n");
goto err;
}
if (!mei_hw_is_ready(dev)) {
dev_err(&dev->pdev->dev, "ME is not ready.\n");
goto err;
}
if (!mei_hbm_version_is_supported(dev)) {
dev_dbg(&dev->pdev->dev, "MEI start failed.\n");
goto err;
}
dev_dbg(&dev->pdev->dev, "link layer has been established.\n");
mutex_unlock(&dev->device_lock);
return 0;
err:
dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
dev->dev_state = MEI_DEV_DISABLED;
mutex_unlock(&dev->device_lock);
return -ENODEV;
}
EXPORT_SYMBOL_GPL(mei_start);
/**
* mei_restart - restart device after suspend
*
* @dev: the device structure
*
* returns 0 on success or -ENODEV if the restart hasn't succeeded
*/
int mei_restart(struct mei_device *dev)
{
int err;
mutex_lock(&dev->device_lock);
mei_clear_interrupts(dev);
dev->dev_state = MEI_DEV_POWER_UP;
dev->reset_count = 0;
err = mei_reset(dev);
mutex_unlock(&dev->device_lock);
if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "device disabled = %d\n", err);
return -ENODEV;
}
/* try to start again */
if (err)
schedule_work(&dev->reset_work);
return 0;
}
EXPORT_SYMBOL_GPL(mei_restart);
static void mei_reset_work(struct work_struct *work)
{
struct mei_device *dev =
container_of(work, struct mei_device, reset_work);
int ret;
mutex_lock(&dev->device_lock);
ret = mei_reset(dev);
mutex_unlock(&dev->device_lock);
if (dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "device disabled = %d\n", ret);
return;
}
/* retry reset in case of failure */
if (ret)
schedule_work(&dev->reset_work);
}
void mei_stop(struct mei_device *dev)
{
dev_dbg(&dev->pdev->dev, "stopping the device.\n");
mei_cancel_work(dev);
mei_nfc_host_exit(dev);
mei_cl_bus_remove_devices(dev);
mutex_lock(&dev->device_lock);
mei_wd_stop(dev);
dev->dev_state = MEI_DEV_POWER_DOWN;
mei_reset(dev);
mutex_unlock(&dev->device_lock);
mei_watchdog_unregister(dev);
}
EXPORT_SYMBOL_GPL(mei_stop);
/**
* mei_write_is_idle - check if the write queues are idle
*
* @dev: the device structure
*
* returns true of there is no pending write
*/
bool mei_write_is_idle(struct mei_device *dev)
{
bool idle = (dev->dev_state == MEI_DEV_ENABLED &&
list_empty(&dev->ctrl_wr_list.list) &&
list_empty(&dev->write_list.list));
dev_dbg(&dev->pdev->dev, "write pg: is idle[%d] state=%s ctrl=%d write=%d\n",
idle,
mei_dev_state_str(dev->dev_state),
list_empty(&dev->ctrl_wr_list.list),
list_empty(&dev->write_list.list));
return idle;
}
EXPORT_SYMBOL_GPL(mei_write_is_idle);
int mei_fw_status(struct mei_device *dev, struct mei_fw_status *fw_status)
{
int i;
const struct mei_fw_status *fw_src = &dev->cfg->fw_status;
if (!fw_status)
return -EINVAL;
fw_status->count = fw_src->count;
for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
int ret;
ret = pci_read_config_dword(dev->pdev,
fw_src->status[i], &fw_status->status[i]);
if (ret)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(mei_fw_status);
void mei_device_init(struct mei_device *dev, const struct mei_cfg *cfg)
{
/* setup our list array */
INIT_LIST_HEAD(&dev->file_list);
INIT_LIST_HEAD(&dev->device_list);
mutex_init(&dev->device_lock);
init_waitqueue_head(&dev->wait_hw_ready);
init_waitqueue_head(&dev->wait_pg);
init_waitqueue_head(&dev->wait_recvd_msg);
init_waitqueue_head(&dev->wait_stop_wd);
dev->dev_state = MEI_DEV_INITIALIZING;
dev->reset_count = 0;
mei_io_list_init(&dev->read_list);
mei_io_list_init(&dev->write_list);
mei_io_list_init(&dev->write_waiting_list);
mei_io_list_init(&dev->ctrl_wr_list);
mei_io_list_init(&dev->ctrl_rd_list);
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
INIT_WORK(&dev->init_work, mei_host_client_init);
INIT_WORK(&dev->reset_work, mei_reset_work);
INIT_LIST_HEAD(&dev->wd_cl.link);
INIT_LIST_HEAD(&dev->iamthif_cl.link);
mei_io_list_init(&dev->amthif_cmd_list);
mei_io_list_init(&dev->amthif_rd_complete_list);
bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
dev->open_handle_count = 0;
/*
* Reserving the first client ID
* 0: Reserved for MEI Bus Message communications
*/
bitmap_set(dev->host_clients_map, 0, 1);
dev->pg_event = MEI_PG_EVENT_IDLE;
dev->cfg = cfg;
}
EXPORT_SYMBOL_GPL(mei_device_init);