blob: df4b5e20e05f056d8e6dad66628c73dd32a2d3f4 [file] [log] [blame]
/**
* @section LICENSE
* Copyright (c) 2014 Redpine Signals Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#ifndef __RSI_SDIO_INTF__
#define __RSI_SDIO_INTF__
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sd.h>
#include <linux/mmc/sdio_ids.h>
#include "rsi_main.h"
enum sdio_interrupt_type {
BUFFER_FULL = 0x0,
BUFFER_AVAILABLE = 0x1,
FIRMWARE_ASSERT_IND = 0x3,
MSDU_PACKET_PENDING = 0x4,
UNKNOWN_INT = 0XE
};
/* Buffer status register related info */
#define PKT_BUFF_SEMI_FULL 0
#define PKT_BUFF_FULL 1
#define PKT_MGMT_BUFF_FULL 2
#define MSDU_PKT_PENDING 3
/* Interrupt Bit Related Macros */
#define PKT_BUFF_AVAILABLE 0
#define FW_ASSERT_IND 2
#define RSI_DEVICE_BUFFER_STATUS_REGISTER 0xf3
#define RSI_FN1_INT_REGISTER 0xf9
#define RSI_SD_REQUEST_MASTER 0x10000
/* FOR SD CARD ONLY */
#define SDIO_RX_NUM_BLOCKS_REG 0x000F1
#define SDIO_FW_STATUS_REG 0x000F2
#define SDIO_NXT_RD_DELAY2 0x000F5
#define SDIO_MASTER_ACCESS_MSBYTE 0x000FA
#define SDIO_MASTER_ACCESS_LSBYTE 0x000FB
#define SDIO_READ_START_LVL 0x000FC
#define SDIO_READ_FIFO_CTL 0x000FD
#define SDIO_WRITE_FIFO_CTL 0x000FE
#define SDIO_FUN1_INTR_CLR_REG 0x0008
#define SDIO_REG_HIGH_SPEED 0x0013
#define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE) \
{ \
TYPE = \
(_I & (1 << PKT_BUFF_AVAILABLE)) ? \
BUFFER_AVAILABLE : \
(_I & (1 << MSDU_PKT_PENDING)) ? \
MSDU_PACKET_PENDING : \
(_I & (1 << FW_ASSERT_IND)) ? \
FIRMWARE_ASSERT_IND : UNKNOWN_INT; \
}
/* common registers in SDIO function1 */
#define TA_SOFT_RESET_REG 0x0004
#define TA_TH0_PC_REG 0x0400
#define TA_HOLD_THREAD_REG 0x0844
#define TA_RELEASE_THREAD_REG 0x0848
#define TA_SOFT_RST_CLR 0
#define TA_SOFT_RST_SET BIT(0)
#define TA_PC_ZERO 0
#define TA_HOLD_THREAD_VALUE cpu_to_le32(0xF)
#define TA_RELEASE_THREAD_VALUE cpu_to_le32(0xF)
#define TA_BASE_ADDR 0x2200
#define MISC_CFG_BASE_ADDR 0x4150
struct receive_info {
bool buffer_full;
bool semi_buffer_full;
bool mgmt_buffer_full;
u32 mgmt_buf_full_counter;
u32 buf_semi_full_counter;
u8 watch_bufferfull_count;
u32 sdio_intr_status_zero;
u32 sdio_int_counter;
u32 total_sdio_msdu_pending_intr;
u32 total_sdio_unknown_intr;
u32 buf_full_counter;
u32 buf_avilable_counter;
};
struct rsi_91x_sdiodev {
struct sdio_func *pfunction;
struct task_struct *in_sdio_litefi_irq;
struct receive_info rx_info;
u32 next_read_delay;
u32 sdio_high_speed_enable;
u8 sdio_clock_speed;
u32 cardcapability;
u8 prev_desc[16];
u32 tx_blk_size;
u8 write_fail;
};
void rsi_interrupt_handler(struct rsi_hw *adapter);
int rsi_init_sdio_slave_regs(struct rsi_hw *adapter);
int rsi_sdio_device_init(struct rsi_common *common);
int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data);
int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function,
u32 addr, u8 *data);
int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr,
u8 *data, u32 count);
void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit);
int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter);
int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num);
#endif