| /************************************************************************ |
| * Copyright 2003 Digi International (www.digi.com) |
| * |
| * Copyright (C) 2004 IBM Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the |
| * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR |
| * PURPOSE. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * Contact Information: |
| * Scott H Kilau <Scott_Kilau@digi.com> |
| * Wendy Xiong <wendyx@us.ibm.com> |
| * |
| ***********************************************************************/ |
| |
| #ifndef __JSM_DRIVER_H |
| #define __JSM_DRIVER_H |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> /* To pick up the varions Linux types */ |
| #include <linux/tty.h> |
| #include <linux/serial_core.h> |
| #include <linux/device.h> |
| |
| /* |
| * Debugging levels can be set using debug insmod variable |
| * They can also be compiled out completely. |
| */ |
| enum { |
| DBG_INIT = 0x01, |
| DBG_BASIC = 0x02, |
| DBG_CORE = 0x04, |
| DBG_OPEN = 0x08, |
| DBG_CLOSE = 0x10, |
| DBG_READ = 0x20, |
| DBG_WRITE = 0x40, |
| DBG_IOCTL = 0x80, |
| DBG_PROC = 0x100, |
| DBG_PARAM = 0x200, |
| DBG_PSCAN = 0x400, |
| DBG_EVENT = 0x800, |
| DBG_DRAIN = 0x1000, |
| DBG_MSIGS = 0x2000, |
| DBG_MGMT = 0x4000, |
| DBG_INTR = 0x8000, |
| DBG_CARR = 0x10000, |
| }; |
| |
| #define jsm_dbg(nlevel, pdev, fmt, ...) \ |
| do { \ |
| if (DBG_##nlevel & jsm_debug) \ |
| dev_dbg(pdev->dev, fmt, ##__VA_ARGS__); \ |
| } while (0) |
| |
| #define MAXLINES 256 |
| #define MAXPORTS 8 |
| #define MAX_STOPS_SENT 5 |
| |
| /* Board type definitions */ |
| |
| #define T_NEO 0000 |
| #define T_CLASSIC 0001 |
| #define T_PCIBUS 0400 |
| |
| /* Board State Definitions */ |
| |
| #define BD_RUNNING 0x0 |
| #define BD_REASON 0x7f |
| #define BD_NOTFOUND 0x1 |
| #define BD_NOIOPORT 0x2 |
| #define BD_NOMEM 0x3 |
| #define BD_NOBIOS 0x4 |
| #define BD_NOFEP 0x5 |
| #define BD_FAILED 0x6 |
| #define BD_ALLOCATED 0x7 |
| #define BD_TRIBOOT 0x8 |
| #define BD_BADKME 0x80 |
| |
| |
| /* 4 extra for alignment play space */ |
| #define WRITEBUFLEN ((4096) + 4) |
| |
| #define JSM_VERSION "jsm: 1.2-1-INKERNEL" |
| #define JSM_PARTNUM "40002438_A-INKERNEL" |
| |
| struct jsm_board; |
| struct jsm_channel; |
| |
| /************************************************************************ |
| * Per board operations structure * |
| ************************************************************************/ |
| struct board_ops { |
| irq_handler_t intr; |
| void (*uart_init) (struct jsm_channel *ch); |
| void (*uart_off) (struct jsm_channel *ch); |
| void (*param) (struct jsm_channel *ch); |
| void (*assert_modem_signals) (struct jsm_channel *ch); |
| void (*flush_uart_write) (struct jsm_channel *ch); |
| void (*flush_uart_read) (struct jsm_channel *ch); |
| void (*disable_receiver) (struct jsm_channel *ch); |
| void (*enable_receiver) (struct jsm_channel *ch); |
| void (*send_break) (struct jsm_channel *ch); |
| void (*clear_break) (struct jsm_channel *ch, int); |
| void (*send_start_character) (struct jsm_channel *ch); |
| void (*send_stop_character) (struct jsm_channel *ch); |
| void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); |
| u32 (*get_uart_bytes_left) (struct jsm_channel *ch); |
| void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); |
| }; |
| |
| |
| /* |
| * Per-board information |
| */ |
| struct jsm_board |
| { |
| int boardnum; /* Board number: 0-32 */ |
| |
| int type; /* Type of board */ |
| u8 rev; /* PCI revision ID */ |
| struct pci_dev *pci_dev; |
| u32 maxports; /* MAX ports this board can handle */ |
| |
| spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and |
| * the interrupt routine from each other. |
| */ |
| |
| u32 nasync; /* Number of ports on card */ |
| |
| u32 irq; /* Interrupt request number */ |
| |
| u64 membase; /* Start of base memory of the card */ |
| u64 membase_end; /* End of base memory of the card */ |
| |
| u8 __iomem *re_map_membase;/* Remapped memory of the card */ |
| |
| u64 iobase; /* Start of io base of the card */ |
| u64 iobase_end; /* End of io base of the card */ |
| |
| u32 bd_uart_offset; /* Space between each UART */ |
| |
| struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ |
| |
| u32 bd_dividend; /* Board/UARTs specific dividend */ |
| |
| struct board_ops *bd_ops; |
| |
| struct list_head jsm_board_entry; |
| }; |
| |
| /************************************************************************ |
| * Device flag definitions for ch_flags. |
| ************************************************************************/ |
| #define CH_PRON 0x0001 /* Printer on string */ |
| #define CH_STOP 0x0002 /* Output is stopped */ |
| #define CH_STOPI 0x0004 /* Input is stopped */ |
| #define CH_CD 0x0008 /* Carrier is present */ |
| #define CH_FCAR 0x0010 /* Carrier forced on */ |
| #define CH_HANGUP 0x0020 /* Hangup received */ |
| |
| #define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ |
| #define CH_OPENING 0x0080 /* Port in fragile open state */ |
| #define CH_CLOSING 0x0100 /* Port in fragile close state */ |
| #define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ |
| #define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ |
| #define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ |
| #define CH_BREAK_SENDING 0x1000 /* Break is being sent */ |
| #define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ |
| #define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ |
| |
| /* Our Read/Error/Write queue sizes */ |
| #define RQUEUEMASK 0x1FFF /* 8 K - 1 */ |
| #define EQUEUEMASK 0x1FFF /* 8 K - 1 */ |
| #define RQUEUESIZE (RQUEUEMASK + 1) |
| #define EQUEUESIZE RQUEUESIZE |
| |
| |
| /************************************************************************ |
| * Channel information structure. |
| ************************************************************************/ |
| struct jsm_channel { |
| struct uart_port uart_port; |
| struct jsm_board *ch_bd; /* Board structure pointer */ |
| |
| spinlock_t ch_lock; /* provide for serialization */ |
| wait_queue_head_t ch_flags_wait; |
| |
| u32 ch_portnum; /* Port number, 0 offset. */ |
| u32 ch_open_count; /* open count */ |
| u32 ch_flags; /* Channel flags */ |
| |
| u64 ch_close_delay; /* How long we should drop RTS/DTR for */ |
| |
| tcflag_t ch_c_iflag; /* channel iflags */ |
| tcflag_t ch_c_cflag; /* channel cflags */ |
| tcflag_t ch_c_oflag; /* channel oflags */ |
| tcflag_t ch_c_lflag; /* channel lflags */ |
| u8 ch_stopc; /* Stop character */ |
| u8 ch_startc; /* Start character */ |
| |
| u8 ch_mostat; /* FEP output modem status */ |
| u8 ch_mistat; /* FEP input modem status */ |
| |
| struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ |
| u8 ch_cached_lsr; /* Cached value of the LSR register */ |
| |
| u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ |
| u16 ch_r_head; /* Head location of the read queue */ |
| u16 ch_r_tail; /* Tail location of the read queue */ |
| |
| u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ |
| u16 ch_e_head; /* Head location of the error queue */ |
| u16 ch_e_tail; /* Tail location of the error queue */ |
| |
| u64 ch_rxcount; /* total of data received so far */ |
| u64 ch_txcount; /* total of data transmitted so far */ |
| |
| u8 ch_r_tlevel; /* Receive Trigger level */ |
| u8 ch_t_tlevel; /* Transmit Trigger level */ |
| |
| u8 ch_r_watermark; /* Receive Watermark */ |
| |
| |
| u32 ch_stops_sent; /* How many times I have sent a stop character |
| * to try to stop the other guy sending. |
| */ |
| u64 ch_err_parity; /* Count of parity errors on channel */ |
| u64 ch_err_frame; /* Count of framing errors on channel */ |
| u64 ch_err_break; /* Count of breaks on channel */ |
| u64 ch_err_overrun; /* Count of overruns on channel */ |
| |
| u64 ch_xon_sends; /* Count of xons transmitted */ |
| u64 ch_xoff_sends; /* Count of xoffs transmitted */ |
| }; |
| |
| |
| /************************************************************************ |
| * Per channel/port NEO UART structure * |
| ************************************************************************ |
| * Base Structure Entries Usage Meanings to Host * |
| * * |
| * W = read write R = read only * |
| * U = Unused. * |
| ************************************************************************/ |
| |
| struct neo_uart_struct { |
| u8 txrx; /* WR RHR/THR - Holding Reg */ |
| u8 ier; /* WR IER - Interrupt Enable Reg */ |
| u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ |
| u8 lcr; /* WR LCR - Line Control Reg */ |
| u8 mcr; /* WR MCR - Modem Control Reg */ |
| u8 lsr; /* WR LSR - Line Status Reg */ |
| u8 msr; /* WR MSR - Modem Status Reg */ |
| u8 spr; /* WR SPR - Scratch Pad Reg */ |
| u8 fctr; /* WR FCTR - Feature Control Reg */ |
| u8 efr; /* WR EFR - Enhanced Function Reg */ |
| u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ |
| u8 rfifo; /* WR RXCNT/RXTRG - Receive FIFO Reg */ |
| u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ |
| u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ |
| u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ |
| u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ |
| |
| u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ |
| u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ |
| u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ |
| u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ |
| }; |
| |
| /* Where to read the extended interrupt register (32bits instead of 8bits) */ |
| #define UART_17158_POLL_ADDR_OFFSET 0x80 |
| |
| /* |
| * These are the redefinitions for the FCTR on the XR17C158, since |
| * Exar made them different than their earlier design. (XR16C854) |
| */ |
| |
| /* These are only applicable when table D is selected */ |
| #define UART_17158_FCTR_RTS_NODELAY 0x00 |
| #define UART_17158_FCTR_RTS_4DELAY 0x01 |
| #define UART_17158_FCTR_RTS_6DELAY 0x02 |
| #define UART_17158_FCTR_RTS_8DELAY 0x03 |
| #define UART_17158_FCTR_RTS_12DELAY 0x12 |
| #define UART_17158_FCTR_RTS_16DELAY 0x05 |
| #define UART_17158_FCTR_RTS_20DELAY 0x13 |
| #define UART_17158_FCTR_RTS_24DELAY 0x06 |
| #define UART_17158_FCTR_RTS_28DELAY 0x14 |
| #define UART_17158_FCTR_RTS_32DELAY 0x07 |
| #define UART_17158_FCTR_RTS_36DELAY 0x16 |
| #define UART_17158_FCTR_RTS_40DELAY 0x08 |
| #define UART_17158_FCTR_RTS_44DELAY 0x09 |
| #define UART_17158_FCTR_RTS_48DELAY 0x10 |
| #define UART_17158_FCTR_RTS_52DELAY 0x11 |
| |
| #define UART_17158_FCTR_RTS_IRDA 0x10 |
| #define UART_17158_FCTR_RS485 0x20 |
| #define UART_17158_FCTR_TRGA 0x00 |
| #define UART_17158_FCTR_TRGB 0x40 |
| #define UART_17158_FCTR_TRGC 0x80 |
| #define UART_17158_FCTR_TRGD 0xC0 |
| |
| /* 17158 trigger table selects.. */ |
| #define UART_17158_FCTR_BIT6 0x40 |
| #define UART_17158_FCTR_BIT7 0x80 |
| |
| /* 17158 TX/RX memmapped buffer offsets */ |
| #define UART_17158_RX_FIFOSIZE 64 |
| #define UART_17158_TX_FIFOSIZE 64 |
| |
| /* 17158 Extended IIR's */ |
| #define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ |
| #define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ |
| #define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ |
| #define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ |
| |
| /* |
| * These are the extended interrupts that get sent |
| * back to us from the UART's 32bit interrupt register |
| */ |
| #define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ |
| #define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ |
| #define UART_17158_TXRDY 0x3 /* TX Ready */ |
| #define UART_17158_MSR 0x4 /* Modem State Change */ |
| #define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ |
| #define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ |
| |
| /* |
| * These are the EXTENDED definitions for the 17C158's Interrupt |
| * Enable Register. |
| */ |
| #define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ |
| #define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ |
| #define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ |
| #define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ |
| #define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ |
| |
| #define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ |
| #define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ |
| |
| #define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ |
| #define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ |
| #define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ |
| #define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ |
| |
| #define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" |
| #define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" |
| #define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" |
| #define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" |
| #define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" |
| |
| /* |
| * Our Global Variables. |
| */ |
| extern struct uart_driver jsm_uart_driver; |
| extern struct board_ops jsm_neo_ops; |
| extern int jsm_debug; |
| |
| /************************************************************************* |
| * |
| * Prototypes for non-static functions used in more than one module |
| * |
| *************************************************************************/ |
| int jsm_tty_init(struct jsm_board *); |
| int jsm_uart_port_init(struct jsm_board *); |
| int jsm_remove_uart_port(struct jsm_board *); |
| void jsm_input(struct jsm_channel *ch); |
| void jsm_check_queue_flow_control(struct jsm_channel *ch); |
| |
| #endif |
