| /* |
| * linux/kernel/softirq.c |
| * |
| * Copyright (C) 1992 Linus Torvalds |
| * |
| * Distribute under GPLv2. |
| * |
| * Rewritten. Old one was good in 2.2, but in 2.3 it was immoral. --ANK (990903) |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/export.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/mm.h> |
| #include <linux/notifier.h> |
| #include <linux/percpu.h> |
| #include <linux/cpu.h> |
| #include <linux/freezer.h> |
| #include <linux/kthread.h> |
| #include <linux/rcupdate.h> |
| #include <linux/ftrace.h> |
| #include <linux/smp.h> |
| #include <linux/smpboot.h> |
| #include <linux/tick.h> |
| #include <linux/irq.h> |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/irq.h> |
| |
| /* |
| - No shared variables, all the data are CPU local. |
| - If a softirq needs serialization, let it serialize itself |
| by its own spinlocks. |
| - Even if softirq is serialized, only local cpu is marked for |
| execution. Hence, we get something sort of weak cpu binding. |
| Though it is still not clear, will it result in better locality |
| or will not. |
| |
| Examples: |
| - NET RX softirq. It is multithreaded and does not require |
| any global serialization. |
| - NET TX softirq. It kicks software netdevice queues, hence |
| it is logically serialized per device, but this serialization |
| is invisible to common code. |
| - Tasklets: serialized wrt itself. |
| */ |
| |
| #ifndef __ARCH_IRQ_STAT |
| irq_cpustat_t irq_stat[NR_CPUS] ____cacheline_aligned; |
| EXPORT_SYMBOL(irq_stat); |
| #endif |
| |
| static struct softirq_action softirq_vec[NR_SOFTIRQS] __cacheline_aligned_in_smp; |
| |
| DEFINE_PER_CPU(struct task_struct *, ksoftirqd); |
| |
| const char * const softirq_to_name[NR_SOFTIRQS] = { |
| "HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL", |
| "TASKLET", "SCHED", "HRTIMER", "RCU" |
| }; |
| |
| /* |
| * we cannot loop indefinitely here to avoid userspace starvation, |
| * but we also don't want to introduce a worst case 1/HZ latency |
| * to the pending events, so lets the scheduler to balance |
| * the softirq load for us. |
| */ |
| static void wakeup_softirqd(void) |
| { |
| /* Interrupts are disabled: no need to stop preemption */ |
| struct task_struct *tsk = __this_cpu_read(ksoftirqd); |
| |
| if (tsk && tsk->state != TASK_RUNNING) |
| wake_up_process(tsk); |
| } |
| |
| /* |
| * preempt_count and SOFTIRQ_OFFSET usage: |
| * - preempt_count is changed by SOFTIRQ_OFFSET on entering or leaving |
| * softirq processing. |
| * - preempt_count is changed by SOFTIRQ_DISABLE_OFFSET (= 2 * SOFTIRQ_OFFSET) |
| * on local_bh_disable or local_bh_enable. |
| * This lets us distinguish between whether we are currently processing |
| * softirq and whether we just have bh disabled. |
| */ |
| |
| /* |
| * This one is for softirq.c-internal use, |
| * where hardirqs are disabled legitimately: |
| */ |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| void __local_bh_disable_ip(unsigned long ip, unsigned int cnt) |
| { |
| unsigned long flags; |
| |
| WARN_ON_ONCE(in_irq()); |
| |
| raw_local_irq_save(flags); |
| /* |
| * The preempt tracer hooks into preempt_count_add and will break |
| * lockdep because it calls back into lockdep after SOFTIRQ_OFFSET |
| * is set and before current->softirq_enabled is cleared. |
| * We must manually increment preempt_count here and manually |
| * call the trace_preempt_off later. |
| */ |
| __preempt_count_add(cnt); |
| /* |
| * Were softirqs turned off above: |
| */ |
| if (softirq_count() == (cnt & SOFTIRQ_MASK)) |
| trace_softirqs_off(ip); |
| raw_local_irq_restore(flags); |
| |
| if (preempt_count() == cnt) |
| trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1)); |
| } |
| EXPORT_SYMBOL(__local_bh_disable_ip); |
| #endif /* CONFIG_TRACE_IRQFLAGS */ |
| |
| static void __local_bh_enable(unsigned int cnt) |
| { |
| WARN_ON_ONCE(!irqs_disabled()); |
| |
| if (softirq_count() == (cnt & SOFTIRQ_MASK)) |
| trace_softirqs_on(_RET_IP_); |
| preempt_count_sub(cnt); |
| } |
| |
| /* |
| * Special-case - softirqs can safely be enabled in |
| * cond_resched_softirq(), or by __do_softirq(), |
| * without processing still-pending softirqs: |
| */ |
| void _local_bh_enable(void) |
| { |
| WARN_ON_ONCE(in_irq()); |
| __local_bh_enable(SOFTIRQ_DISABLE_OFFSET); |
| } |
| EXPORT_SYMBOL(_local_bh_enable); |
| |
| void __local_bh_enable_ip(unsigned long ip, unsigned int cnt) |
| { |
| WARN_ON_ONCE(in_irq() || irqs_disabled()); |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| local_irq_disable(); |
| #endif |
| /* |
| * Are softirqs going to be turned on now: |
| */ |
| if (softirq_count() == SOFTIRQ_DISABLE_OFFSET) |
| trace_softirqs_on(ip); |
| /* |
| * Keep preemption disabled until we are done with |
| * softirq processing: |
| */ |
| preempt_count_sub(cnt - 1); |
| |
| if (unlikely(!in_interrupt() && local_softirq_pending())) { |
| /* |
| * Run softirq if any pending. And do it in its own stack |
| * as we may be calling this deep in a task call stack already. |
| */ |
| do_softirq(); |
| } |
| |
| preempt_count_dec(); |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| local_irq_enable(); |
| #endif |
| preempt_check_resched(); |
| } |
| EXPORT_SYMBOL(__local_bh_enable_ip); |
| |
| /* |
| * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times, |
| * but break the loop if need_resched() is set or after 2 ms. |
| * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in |
| * certain cases, such as stop_machine(), jiffies may cease to |
| * increment and so we need the MAX_SOFTIRQ_RESTART limit as |
| * well to make sure we eventually return from this method. |
| * |
| * These limits have been established via experimentation. |
| * The two things to balance is latency against fairness - |
| * we want to handle softirqs as soon as possible, but they |
| * should not be able to lock up the box. |
| */ |
| #define MAX_SOFTIRQ_TIME msecs_to_jiffies(2) |
| #define MAX_SOFTIRQ_RESTART 10 |
| |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| /* |
| * When we run softirqs from irq_exit() and thus on the hardirq stack we need |
| * to keep the lockdep irq context tracking as tight as possible in order to |
| * not miss-qualify lock contexts and miss possible deadlocks. |
| */ |
| |
| static inline bool lockdep_softirq_start(void) |
| { |
| bool in_hardirq = false; |
| |
| if (trace_hardirq_context(current)) { |
| in_hardirq = true; |
| trace_hardirq_exit(); |
| } |
| |
| lockdep_softirq_enter(); |
| |
| return in_hardirq; |
| } |
| |
| static inline void lockdep_softirq_end(bool in_hardirq) |
| { |
| lockdep_softirq_exit(); |
| |
| if (in_hardirq) |
| trace_hardirq_enter(); |
| } |
| #else |
| static inline bool lockdep_softirq_start(void) { return false; } |
| static inline void lockdep_softirq_end(bool in_hardirq) { } |
| #endif |
| |
| asmlinkage __visible void __do_softirq(void) |
| { |
| unsigned long end = jiffies + MAX_SOFTIRQ_TIME; |
| unsigned long old_flags = current->flags; |
| int max_restart = MAX_SOFTIRQ_RESTART; |
| struct softirq_action *h; |
| bool in_hardirq; |
| __u32 pending; |
| int softirq_bit; |
| |
| /* |
| * Mask out PF_MEMALLOC s current task context is borrowed for the |
| * softirq. A softirq handled such as network RX might set PF_MEMALLOC |
| * again if the socket is related to swap |
| */ |
| current->flags &= ~PF_MEMALLOC; |
| |
| pending = local_softirq_pending(); |
| account_irq_enter_time(current); |
| |
| __local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET); |
| in_hardirq = lockdep_softirq_start(); |
| |
| restart: |
| /* Reset the pending bitmask before enabling irqs */ |
| set_softirq_pending(0); |
| |
| local_irq_enable(); |
| |
| h = softirq_vec; |
| |
| while ((softirq_bit = ffs(pending))) { |
| unsigned int vec_nr; |
| int prev_count; |
| |
| h += softirq_bit - 1; |
| |
| vec_nr = h - softirq_vec; |
| prev_count = preempt_count(); |
| |
| kstat_incr_softirqs_this_cpu(vec_nr); |
| |
| trace_softirq_entry(vec_nr); |
| h->action(h); |
| trace_softirq_exit(vec_nr); |
| if (unlikely(prev_count != preempt_count())) { |
| pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n", |
| vec_nr, softirq_to_name[vec_nr], h->action, |
| prev_count, preempt_count()); |
| preempt_count_set(prev_count); |
| } |
| h++; |
| pending >>= softirq_bit; |
| } |
| |
| rcu_bh_qs(smp_processor_id()); |
| local_irq_disable(); |
| |
| pending = local_softirq_pending(); |
| if (pending) { |
| if (time_before(jiffies, end) && !need_resched() && |
| --max_restart) |
| goto restart; |
| |
| wakeup_softirqd(); |
| } |
| |
| lockdep_softirq_end(in_hardirq); |
| account_irq_exit_time(current); |
| __local_bh_enable(SOFTIRQ_OFFSET); |
| WARN_ON_ONCE(in_interrupt()); |
| tsk_restore_flags(current, old_flags, PF_MEMALLOC); |
| } |
| |
| asmlinkage __visible void do_softirq(void) |
| { |
| __u32 pending; |
| unsigned long flags; |
| |
| if (in_interrupt()) |
| return; |
| |
| local_irq_save(flags); |
| |
| pending = local_softirq_pending(); |
| |
| if (pending) |
| do_softirq_own_stack(); |
| |
| local_irq_restore(flags); |
| } |
| |
| /* |
| * Enter an interrupt context. |
| */ |
| void irq_enter(void) |
| { |
| rcu_irq_enter(); |
| if (is_idle_task(current) && !in_interrupt()) { |
| /* |
| * Prevent raise_softirq from needlessly waking up ksoftirqd |
| * here, as softirq will be serviced on return from interrupt. |
| */ |
| local_bh_disable(); |
| tick_irq_enter(); |
| _local_bh_enable(); |
| } |
| |
| __irq_enter(); |
| } |
| |
| static inline void invoke_softirq(void) |
| { |
| if (!force_irqthreads) { |
| #ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK |
| /* |
| * We can safely execute softirq on the current stack if |
| * it is the irq stack, because it should be near empty |
| * at this stage. |
| */ |
| __do_softirq(); |
| #else |
| /* |
| * Otherwise, irq_exit() is called on the task stack that can |
| * be potentially deep already. So call softirq in its own stack |
| * to prevent from any overrun. |
| */ |
| do_softirq_own_stack(); |
| #endif |
| } else { |
| wakeup_softirqd(); |
| } |
| } |
| |
| static inline void tick_irq_exit(void) |
| { |
| #ifdef CONFIG_NO_HZ_COMMON |
| int cpu = smp_processor_id(); |
| |
| /* Make sure that timer wheel updates are propagated */ |
| if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) { |
| if (!in_interrupt()) |
| tick_nohz_irq_exit(); |
| } |
| #endif |
| } |
| |
| /* |
| * Exit an interrupt context. Process softirqs if needed and possible: |
| */ |
| void irq_exit(void) |
| { |
| #ifndef __ARCH_IRQ_EXIT_IRQS_DISABLED |
| local_irq_disable(); |
| #else |
| WARN_ON_ONCE(!irqs_disabled()); |
| #endif |
| |
| account_irq_exit_time(current); |
| preempt_count_sub(HARDIRQ_OFFSET); |
| if (!in_interrupt() && local_softirq_pending()) |
| invoke_softirq(); |
| |
| tick_irq_exit(); |
| rcu_irq_exit(); |
| trace_hardirq_exit(); /* must be last! */ |
| } |
| |
| /* |
| * This function must run with irqs disabled! |
| */ |
| inline void raise_softirq_irqoff(unsigned int nr) |
| { |
| __raise_softirq_irqoff(nr); |
| |
| /* |
| * If we're in an interrupt or softirq, we're done |
| * (this also catches softirq-disabled code). We will |
| * actually run the softirq once we return from |
| * the irq or softirq. |
| * |
| * Otherwise we wake up ksoftirqd to make sure we |
| * schedule the softirq soon. |
| */ |
| if (!in_interrupt()) |
| wakeup_softirqd(); |
| } |
| |
| void raise_softirq(unsigned int nr) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| raise_softirq_irqoff(nr); |
| local_irq_restore(flags); |
| } |
| |
| void __raise_softirq_irqoff(unsigned int nr) |
| { |
| trace_softirq_raise(nr); |
| or_softirq_pending(1UL << nr); |
| } |
| |
| void open_softirq(int nr, void (*action)(struct softirq_action *)) |
| { |
| softirq_vec[nr].action = action; |
| } |
| |
| /* |
| * Tasklets |
| */ |
| struct tasklet_head { |
| struct tasklet_struct *head; |
| struct tasklet_struct **tail; |
| }; |
| |
| static DEFINE_PER_CPU(struct tasklet_head, tasklet_vec); |
| static DEFINE_PER_CPU(struct tasklet_head, tasklet_hi_vec); |
| |
| void __tasklet_schedule(struct tasklet_struct *t) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| t->next = NULL; |
| *__this_cpu_read(tasklet_vec.tail) = t; |
| __this_cpu_write(tasklet_vec.tail, &(t->next)); |
| raise_softirq_irqoff(TASKLET_SOFTIRQ); |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(__tasklet_schedule); |
| |
| void __tasklet_hi_schedule(struct tasklet_struct *t) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| t->next = NULL; |
| *__this_cpu_read(tasklet_hi_vec.tail) = t; |
| __this_cpu_write(tasklet_hi_vec.tail, &(t->next)); |
| raise_softirq_irqoff(HI_SOFTIRQ); |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(__tasklet_hi_schedule); |
| |
| void __tasklet_hi_schedule_first(struct tasklet_struct *t) |
| { |
| BUG_ON(!irqs_disabled()); |
| |
| t->next = __this_cpu_read(tasklet_hi_vec.head); |
| __this_cpu_write(tasklet_hi_vec.head, t); |
| __raise_softirq_irqoff(HI_SOFTIRQ); |
| } |
| EXPORT_SYMBOL(__tasklet_hi_schedule_first); |
| |
| static void tasklet_action(struct softirq_action *a) |
| { |
| struct tasklet_struct *list; |
| |
| local_irq_disable(); |
| list = __this_cpu_read(tasklet_vec.head); |
| __this_cpu_write(tasklet_vec.head, NULL); |
| __this_cpu_write(tasklet_vec.tail, &__get_cpu_var(tasklet_vec).head); |
| local_irq_enable(); |
| |
| while (list) { |
| struct tasklet_struct *t = list; |
| |
| list = list->next; |
| |
| if (tasklet_trylock(t)) { |
| if (!atomic_read(&t->count)) { |
| if (!test_and_clear_bit(TASKLET_STATE_SCHED, |
| &t->state)) |
| BUG(); |
| t->func(t->data); |
| tasklet_unlock(t); |
| continue; |
| } |
| tasklet_unlock(t); |
| } |
| |
| local_irq_disable(); |
| t->next = NULL; |
| *__this_cpu_read(tasklet_vec.tail) = t; |
| __this_cpu_write(tasklet_vec.tail, &(t->next)); |
| __raise_softirq_irqoff(TASKLET_SOFTIRQ); |
| local_irq_enable(); |
| } |
| } |
| |
| static void tasklet_hi_action(struct softirq_action *a) |
| { |
| struct tasklet_struct *list; |
| |
| local_irq_disable(); |
| list = __this_cpu_read(tasklet_hi_vec.head); |
| __this_cpu_write(tasklet_hi_vec.head, NULL); |
| __this_cpu_write(tasklet_hi_vec.tail, &__get_cpu_var(tasklet_hi_vec).head); |
| local_irq_enable(); |
| |
| while (list) { |
| struct tasklet_struct *t = list; |
| |
| list = list->next; |
| |
| if (tasklet_trylock(t)) { |
| if (!atomic_read(&t->count)) { |
| if (!test_and_clear_bit(TASKLET_STATE_SCHED, |
| &t->state)) |
| BUG(); |
| t->func(t->data); |
| tasklet_unlock(t); |
| continue; |
| } |
| tasklet_unlock(t); |
| } |
| |
| local_irq_disable(); |
| t->next = NULL; |
| *__this_cpu_read(tasklet_hi_vec.tail) = t; |
| __this_cpu_write(tasklet_hi_vec.tail, &(t->next)); |
| __raise_softirq_irqoff(HI_SOFTIRQ); |
| local_irq_enable(); |
| } |
| } |
| |
| void tasklet_init(struct tasklet_struct *t, |
| void (*func)(unsigned long), unsigned long data) |
| { |
| t->next = NULL; |
| t->state = 0; |
| atomic_set(&t->count, 0); |
| t->func = func; |
| t->data = data; |
| } |
| EXPORT_SYMBOL(tasklet_init); |
| |
| void tasklet_kill(struct tasklet_struct *t) |
| { |
| if (in_interrupt()) |
| pr_notice("Attempt to kill tasklet from interrupt\n"); |
| |
| while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) { |
| do { |
| yield(); |
| } while (test_bit(TASKLET_STATE_SCHED, &t->state)); |
| } |
| tasklet_unlock_wait(t); |
| clear_bit(TASKLET_STATE_SCHED, &t->state); |
| } |
| EXPORT_SYMBOL(tasklet_kill); |
| |
| /* |
| * tasklet_hrtimer |
| */ |
| |
| /* |
| * The trampoline is called when the hrtimer expires. It schedules a tasklet |
| * to run __tasklet_hrtimer_trampoline() which in turn will call the intended |
| * hrtimer callback, but from softirq context. |
| */ |
| static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer) |
| { |
| struct tasklet_hrtimer *ttimer = |
| container_of(timer, struct tasklet_hrtimer, timer); |
| |
| tasklet_hi_schedule(&ttimer->tasklet); |
| return HRTIMER_NORESTART; |
| } |
| |
| /* |
| * Helper function which calls the hrtimer callback from |
| * tasklet/softirq context |
| */ |
| static void __tasklet_hrtimer_trampoline(unsigned long data) |
| { |
| struct tasklet_hrtimer *ttimer = (void *)data; |
| enum hrtimer_restart restart; |
| |
| restart = ttimer->function(&ttimer->timer); |
| if (restart != HRTIMER_NORESTART) |
| hrtimer_restart(&ttimer->timer); |
| } |
| |
| /** |
| * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks |
| * @ttimer: tasklet_hrtimer which is initialized |
| * @function: hrtimer callback function which gets called from softirq context |
| * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME) |
| * @mode: hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL) |
| */ |
| void tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, |
| enum hrtimer_restart (*function)(struct hrtimer *), |
| clockid_t which_clock, enum hrtimer_mode mode) |
| { |
| hrtimer_init(&ttimer->timer, which_clock, mode); |
| ttimer->timer.function = __hrtimer_tasklet_trampoline; |
| tasklet_init(&ttimer->tasklet, __tasklet_hrtimer_trampoline, |
| (unsigned long)ttimer); |
| ttimer->function = function; |
| } |
| EXPORT_SYMBOL_GPL(tasklet_hrtimer_init); |
| |
| void __init softirq_init(void) |
| { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) { |
| per_cpu(tasklet_vec, cpu).tail = |
| &per_cpu(tasklet_vec, cpu).head; |
| per_cpu(tasklet_hi_vec, cpu).tail = |
| &per_cpu(tasklet_hi_vec, cpu).head; |
| } |
| |
| open_softirq(TASKLET_SOFTIRQ, tasklet_action); |
| open_softirq(HI_SOFTIRQ, tasklet_hi_action); |
| } |
| |
| static int ksoftirqd_should_run(unsigned int cpu) |
| { |
| return local_softirq_pending(); |
| } |
| |
| static void run_ksoftirqd(unsigned int cpu) |
| { |
| local_irq_disable(); |
| if (local_softirq_pending()) { |
| /* |
| * We can safely run softirq on inline stack, as we are not deep |
| * in the task stack here. |
| */ |
| __do_softirq(); |
| rcu_note_context_switch(cpu); |
| local_irq_enable(); |
| cond_resched(); |
| return; |
| } |
| local_irq_enable(); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| /* |
| * tasklet_kill_immediate is called to remove a tasklet which can already be |
| * scheduled for execution on @cpu. |
| * |
| * Unlike tasklet_kill, this function removes the tasklet |
| * _immediately_, even if the tasklet is in TASKLET_STATE_SCHED state. |
| * |
| * When this function is called, @cpu must be in the CPU_DEAD state. |
| */ |
| void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu) |
| { |
| struct tasklet_struct **i; |
| |
| BUG_ON(cpu_online(cpu)); |
| BUG_ON(test_bit(TASKLET_STATE_RUN, &t->state)); |
| |
| if (!test_bit(TASKLET_STATE_SCHED, &t->state)) |
| return; |
| |
| /* CPU is dead, so no lock needed. */ |
| for (i = &per_cpu(tasklet_vec, cpu).head; *i; i = &(*i)->next) { |
| if (*i == t) { |
| *i = t->next; |
| /* If this was the tail element, move the tail ptr */ |
| if (*i == NULL) |
| per_cpu(tasklet_vec, cpu).tail = i; |
| return; |
| } |
| } |
| BUG(); |
| } |
| |
| static void takeover_tasklets(unsigned int cpu) |
| { |
| /* CPU is dead, so no lock needed. */ |
| local_irq_disable(); |
| |
| /* Find end, append list for that CPU. */ |
| if (&per_cpu(tasklet_vec, cpu).head != per_cpu(tasklet_vec, cpu).tail) { |
| *__this_cpu_read(tasklet_vec.tail) = per_cpu(tasklet_vec, cpu).head; |
| this_cpu_write(tasklet_vec.tail, per_cpu(tasklet_vec, cpu).tail); |
| per_cpu(tasklet_vec, cpu).head = NULL; |
| per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head; |
| } |
| raise_softirq_irqoff(TASKLET_SOFTIRQ); |
| |
| if (&per_cpu(tasklet_hi_vec, cpu).head != per_cpu(tasklet_hi_vec, cpu).tail) { |
| *__this_cpu_read(tasklet_hi_vec.tail) = per_cpu(tasklet_hi_vec, cpu).head; |
| __this_cpu_write(tasklet_hi_vec.tail, per_cpu(tasklet_hi_vec, cpu).tail); |
| per_cpu(tasklet_hi_vec, cpu).head = NULL; |
| per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head; |
| } |
| raise_softirq_irqoff(HI_SOFTIRQ); |
| |
| local_irq_enable(); |
| } |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| |
| static int cpu_callback(struct notifier_block *nfb, unsigned long action, |
| void *hcpu) |
| { |
| switch (action) { |
| #ifdef CONFIG_HOTPLUG_CPU |
| case CPU_DEAD: |
| case CPU_DEAD_FROZEN: |
| takeover_tasklets((unsigned long)hcpu); |
| break; |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block cpu_nfb = { |
| .notifier_call = cpu_callback |
| }; |
| |
| static struct smp_hotplug_thread softirq_threads = { |
| .store = &ksoftirqd, |
| .thread_should_run = ksoftirqd_should_run, |
| .thread_fn = run_ksoftirqd, |
| .thread_comm = "ksoftirqd/%u", |
| }; |
| |
| static __init int spawn_ksoftirqd(void) |
| { |
| register_cpu_notifier(&cpu_nfb); |
| |
| BUG_ON(smpboot_register_percpu_thread(&softirq_threads)); |
| |
| return 0; |
| } |
| early_initcall(spawn_ksoftirqd); |
| |
| /* |
| * [ These __weak aliases are kept in a separate compilation unit, so that |
| * GCC does not inline them incorrectly. ] |
| */ |
| |
| int __init __weak early_irq_init(void) |
| { |
| return 0; |
| } |
| |
| int __init __weak arch_probe_nr_irqs(void) |
| { |
| return NR_IRQS_LEGACY; |
| } |
| |
| int __init __weak arch_early_irq_init(void) |
| { |
| return 0; |
| } |
| |
| unsigned int __weak arch_dynirq_lower_bound(unsigned int from) |
| { |
| return from; |
| } |