| * Cadence MACB/GEM Ethernet controller |
| |
| Required properties: |
| - compatible: Should be "cdns,[<chip>-]{macb|gem}" |
| Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. |
| Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". |
| Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on |
| the Cadence GEM, or the generic form: "cdns,gem". |
| - reg: Address and length of the register set for the device |
| - interrupts: Should contain macb interrupt |
| - phy-mode: See ethernet.txt file in the same directory. |
| - clock-names: Tuple listing input clock names. |
| Required elements: 'pclk', 'hclk' |
| Optional elements: 'tx_clk' |
| - clocks: Phandles to input clocks. |
| |
| Examples: |
| |
| macb0: ethernet@fffc4000 { |
| compatible = "cdns,at32ap7000-macb"; |
| reg = <0xfffc4000 0x4000>; |
| interrupts = <21>; |
| phy-mode = "rmii"; |
| local-mac-address = [3a 0e 03 04 05 06]; |
| clock-names = "pclk", "hclk", "tx_clk"; |
| clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; |
| }; |
