arch/powerpc/include/asm/irq.h - arm/linux-arm64-legacy - Git at Google

 #ifdef __KERNEL__
 #ifndef _ASM_POWERPC_IRQ_H
 #define _ASM_POWERPC_IRQ_H

 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */

 #include <linux/threads.h>
 #include <linux/list.h>
 #include <linux/radix-tree.h>

 #include <asm/types.h>
 #include <asm/atomic.h>


 #define get_irq_desc(irq) (&irq_desc[(irq)])

 /* Define a way to iterate across irqs. */
 #define for_each_irq(i) \
 	for ((i) = 0; (i) < NR_IRQS; ++(i))

 extern atomic_t ppc_n_lost_interrupts;

 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ			(0)

 /* This is a special irq number to return from get_irq() to tell that
  * no interrupt happened _and_ ignore it (don't count it as bad). Some
  * platforms like iSeries rely on that.
  */
 #define NO_IRQ_IGNORE		((unsigned int)-1)

 /* Total number of virq in the platform (make it a CONFIG_* option ? */
 #define NR_IRQS		512

 /* Number of irqs reserved for the legacy controller */
 #define NUM_ISA_INTERRUPTS	16

 /* This type is the placeholder for a hardware interrupt number. It has to
  * be big enough to enclose whatever representation is used by a given
  * platform.
  */
 typedef unsigned long irq_hw_number_t;

 /* Interrupt controller "host" data structure. This could be defined as a
  * irq domain controller. That is, it handles the mapping between hardware
  * and virtual interrupt numbers for a given interrupt domain. The host
  * structure is generally created by the PIC code for a given PIC instance
  * (though a host can cover more than one PIC if they have a flat number
  * model). It's the host callbacks that are responsible for setting the
  * irq_chip on a given irq_desc after it's been mapped.
  *
  * The host code and data structures are fairly agnostic to the fact that
  * we use an open firmware device-tree. We do have references to struct
  * device_node in two places: in irq_find_host() to find the host matching
  * a given interrupt controller node, and of course as an argument to its
  * counterpart host->ops->match() callback. However, those are treated as
  * generic pointers by the core and the fact that it's actually a device-node
  * pointer is purely a convention between callers and implementation. This
  * code could thus be used on other architectures by replacing those two
  * by some sort of arch-specific void * "token" used to identify interrupt
  * controllers.
  */
 struct irq_host;
 struct radix_tree_root;

 /* Functions below are provided by the host and called whenever a new mapping
  * is created or an old mapping is disposed. The host can then proceed to
  * whatever internal data structures management is required. It also needs
  * to setup the irq_desc when returning from map().
  */
 struct irq_host_ops {
 	/* Match an interrupt controller device node to a host, returns
 	 * 1 on a match
 	 */
 	int (*match)(struct irq_host *h, struct device_node *node);

 	/* Create or update a mapping between a virtual irq number and a hw
 	 * irq number. This is called only once for a given mapping.
 	 */
 	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);

 	/* Dispose of such a mapping */
 	void (*unmap)(struct irq_host *h, unsigned int virq);

 	/* Update of such a mapping  */
 	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);

 	/* Translate device-tree interrupt specifier from raw format coming
 	 * from the firmware to a irq_hw_number_t (interrupt line number) and
 	 * type (sense) that can be passed to set_irq_type(). In the absence
 	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
 	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
 	 * the type (which amount to keeping whatever default value the
 	 * interrupt controller has for that line)
 	 */
 	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
 		     u32 *intspec, unsigned int intsize,
 		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
 };

 struct irq_host {
 	struct list_head	link;

 	/* type of reverse mapping technique */
 	unsigned int		revmap_type;
 #define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
 #define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
 #define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
 #define IRQ_HOST_MAP_TREE	3 /* radix tree */
 	union {
 		struct {
 			unsigned int size;
 			unsigned int *revmap;
 		} linear;
 		struct radix_tree_root tree;
 	} revmap_data;
 	struct irq_host_ops	*ops;
 	void			*host_data;
 	irq_hw_number_t		inval_irq;

 	/* Optional device node pointer */
 	struct device_node	*of_node;
 };

 /* The main irq map itself is an array of NR_IRQ entries containing the
  * associate host and irq number. An entry with a host of NULL is free.
  * An entry can be allocated if it's free, the allocator always then sets
  * hwirq first to the host's invalid irq number and then fills ops.
  */
 struct irq_map_entry {
 	irq_hw_number_t	hwirq;
 	struct irq_host	*host;
 };

 extern struct irq_map_entry irq_map[NR_IRQS];

 extern irq_hw_number_t virq_to_hw(unsigned int virq);

 /**
  * irq_alloc_host - Allocate a new irq_host data structure
  * @of_node: optional device-tree node of the interrupt controller
  * @revmap_type: type of reverse mapping to use
  * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
  * @ops: map/unmap host callbacks
  * @inval_irq: provide a hw number in that host space that is always invalid
  *
  * Allocates and initialize and irq_host structure. Note that in the case of
  * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
  * for all legacy interrupts except 0 (which is always the invalid irq for
  * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
  * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
  * later during boot automatically (the reverse mapping will use the slow path
  * until that happens).
  */
 extern struct irq_host *irq_alloc_host(struct device_node *of_node,
 				       unsigned int revmap_type,
 				       unsigned int revmap_arg,
 				       struct irq_host_ops *ops,
 				       irq_hw_number_t inval_irq);


 /**
  * irq_find_host - Locates a host for a given device node
  * @node: device-tree node of the interrupt controller
  */
 extern struct irq_host *irq_find_host(struct device_node *node);


 /**
  * irq_set_default_host - Set a "default" host
  * @host: default host pointer
  *
  * For convenience, it's possible to set a "default" host that will be used
  * whenever NULL is passed to irq_create_mapping(). It makes life easier for
  * platforms that want to manipulate a few hard coded interrupt numbers that
  * aren't properly represented in the device-tree.
  */
 extern void irq_set_default_host(struct irq_host *host);


 /**
  * irq_set_virq_count - Set the maximum number of virt irqs
  * @count: number of linux virtual irqs, capped with NR_IRQS
  *
  * This is mainly for use by platforms like iSeries who want to program
  * the virtual irq number in the controller to avoid the reverse mapping
  */
 extern void irq_set_virq_count(unsigned int count);


 /**
  * irq_create_mapping - Map a hardware interrupt into linux virq space
  * @host: host owning this hardware interrupt or NULL for default host
  * @hwirq: hardware irq number in that host space
  *
  * Only one mapping per hardware interrupt is permitted. Returns a linux
  * virq number.
  * If the sense/trigger is to be specified, set_irq_type() should be called
  * on the number returned from that call.
  */
 extern unsigned int irq_create_mapping(struct irq_host *host,
 				       irq_hw_number_t hwirq);


 /**
  * irq_dispose_mapping - Unmap an interrupt
  * @virq: linux virq number of the interrupt to unmap
  */
 extern void irq_dispose_mapping(unsigned int virq);

 /**
  * irq_find_mapping - Find a linux virq from an hw irq number.
  * @host: host owning this hardware interrupt
  * @hwirq: hardware irq number in that host space
  *
  * This is a slow path, for use by generic code. It's expected that an
  * irq controller implementation directly calls the appropriate low level
  * mapping function.
  */
 extern unsigned int irq_find_mapping(struct irq_host *host,
 				     irq_hw_number_t hwirq);

 /**
  * irq_create_direct_mapping - Allocate a virq for direct mapping
  * @host: host to allocate the virq for or NULL for default host
  *
  * This routine is used for irq controllers which can choose the hardware
  * interrupt numbers they generate. In such a case it's simplest to use
  * the linux virq as the hardware interrupt number.
  */
 extern unsigned int irq_create_direct_mapping(struct irq_host *host);

 /**
  * irq_radix_revmap - Find a linux virq from a hw irq number.
  * @host: host owning this hardware interrupt
  * @hwirq: hardware irq number in that host space
  *
  * This is a fast path, for use by irq controller code that uses radix tree
  * revmaps
  */
 extern unsigned int irq_radix_revmap(struct irq_host *host,
 				     irq_hw_number_t hwirq);

 /**
  * irq_linear_revmap - Find a linux virq from a hw irq number.
  * @host: host owning this hardware interrupt
  * @hwirq: hardware irq number in that host space
  *
  * This is a fast path, for use by irq controller code that uses linear
  * revmaps. It does fallback to the slow path if the revmap doesn't exist
  * yet and will create the revmap entry with appropriate locking
  */

 extern unsigned int irq_linear_revmap(struct irq_host *host,
 				      irq_hw_number_t hwirq);


 /**
  * irq_alloc_virt - Allocate virtual irq numbers
  * @host: host owning these new virtual irqs
  * @count: number of consecutive numbers to allocate
  * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
  *
  * This is a low level function that is used internally by irq_create_mapping()
  * and that can be used by some irq controllers implementations for things
  * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
  */
 extern unsigned int irq_alloc_virt(struct irq_host *host,
 				   unsigned int count,
 				   unsigned int hint);

 /**
  * irq_free_virt - Free virtual irq numbers
  * @virq: virtual irq number of the first interrupt to free
  * @count: number of interrupts to free
  *
  * This function is the opposite of irq_alloc_virt. It will not clear reverse
  * maps, this should be done previously by unmap'ing the interrupt. In fact,
  * all interrupts covered by the range being freed should have been unmapped
  * prior to calling this.
  */
 extern void irq_free_virt(unsigned int virq, unsigned int count);


 /* -- OF helpers -- */

 /* irq_create_of_mapping - Map a hardware interrupt into linux virq space
  * @controller: Device node of the interrupt controller
  * @inspec: Interrupt specifier from the device-tree
  * @intsize: Size of the interrupt specifier from the device-tree
  *
  * This function is identical to irq_create_mapping except that it takes
  * as input informations straight from the device-tree (typically the results
  * of the of_irq_map_*() functions.
  */
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
 					  u32 *intspec, unsigned int intsize);


 /* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
  * @device: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
  * This function is a wrapper that chains of_irq_map_one() and
  * irq_create_of_mapping() to make things easier to callers
  */
 extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);

 /* -- End OF helpers -- */

 /**
  * irq_early_init - Init irq remapping subsystem
  */
 extern void irq_early_init(void);

 static __inline__ int irq_canonicalize(int irq)
 {
 	return irq;
 }

 extern int distribute_irqs;

 struct irqaction;
 struct pt_regs;

 #define __ARCH_HAS_DO_SOFTIRQ

 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 /*
  * Per-cpu stacks for handling critical, debug and machine check
  * level interrupts.
  */
 extern struct thread_info *critirq_ctx[NR_CPUS];
 extern struct thread_info *dbgirq_ctx[NR_CPUS];
 extern struct thread_info *mcheckirq_ctx[NR_CPUS];
 extern void exc_lvl_ctx_init(void);
 #else
 #define exc_lvl_ctx_init()
 #endif

 #ifdef CONFIG_IRQSTACKS
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
 extern struct thread_info *hardirq_ctx[NR_CPUS];
 extern struct thread_info *softirq_ctx[NR_CPUS];

 extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
 extern int call_handle_irq(int irq, void *p1,
 			   struct thread_info *tp, void *func);
 #else
 #define irq_ctx_init()

 #endif /* CONFIG_IRQSTACKS */

 extern void do_IRQ(struct pt_regs *regs);

 #endif /* _ASM_IRQ_H */
 #endif /* __KERNEL__ */
	#ifdef __KERNEL__
	#ifndef _ASM_POWERPC_IRQ_H
	#define _ASM_POWERPC_IRQ_H

	/*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/

	#include <linux/threads.h>
	#include <linux/list.h>
	#include <linux/radix-tree.h>

	#include <asm/types.h>
	#include <asm/atomic.h>


	#define get_irq_desc(irq) (&irq_desc[(irq)])

	/* Define a way to iterate across irqs. */
	#define for_each_irq(i) \
	for ((i) = 0; (i) < NR_IRQS; ++(i))

	extern atomic_t ppc_n_lost_interrupts;

	/* This number is used when no interrupt has been assigned */
	#define NO_IRQ (0)

	/* This is a special irq number to return from get_irq() to tell that
	* no interrupt happened _and_ ignore it (don't count it as bad). Some
	* platforms like iSeries rely on that.
	*/
	#define NO_IRQ_IGNORE ((unsigned int)-1)

	/* Total number of virq in the platform (make it a CONFIG_* option ? */
	#define NR_IRQS 512

	/* Number of irqs reserved for the legacy controller */
	#define NUM_ISA_INTERRUPTS 16

	/* This type is the placeholder for a hardware interrupt number. It has to
	* be big enough to enclose whatever representation is used by a given
	* platform.
	*/
	typedef unsigned long irq_hw_number_t;

	/* Interrupt controller "host" data structure. This could be defined as a
	* irq domain controller. That is, it handles the mapping between hardware
	* and virtual interrupt numbers for a given interrupt domain. The host
	* structure is generally created by the PIC code for a given PIC instance
	* (though a host can cover more than one PIC if they have a flat number
	* model). It's the host callbacks that are responsible for setting the
	* irq_chip on a given irq_desc after it's been mapped.
	*
	* The host code and data structures are fairly agnostic to the fact that
	* we use an open firmware device-tree. We do have references to struct
	* device_node in two places: in irq_find_host() to find the host matching
	* a given interrupt controller node, and of course as an argument to its
	* counterpart host->ops->match() callback. However, those are treated as
	* generic pointers by the core and the fact that it's actually a device-node
	* pointer is purely a convention between callers and implementation. This
	* code could thus be used on other architectures by replacing those two
	* by some sort of arch-specific void * "token" used to identify interrupt
	* controllers.
	*/
	struct irq_host;
	struct radix_tree_root;

	/* Functions below are provided by the host and called whenever a new mapping
	* is created or an old mapping is disposed. The host can then proceed to
	* whatever internal data structures management is required. It also needs
	* to setup the irq_desc when returning from map().
	*/
	struct irq_host_ops {
	/* Match an interrupt controller device node to a host, returns
	* 1 on a match
	*/
	int (match)(struct irq_host h, struct device_node *node);

	/* Create or update a mapping between a virtual irq number and a hw
	* irq number. This is called only once for a given mapping.
	*/
	int (map)(struct irq_host h, unsigned int virq, irq_hw_number_t hw);

	/* Dispose of such a mapping */
	void (unmap)(struct irq_host h, unsigned int virq);

	/* Update of such a mapping */
	void (remap)(struct irq_host h, unsigned int virq, irq_hw_number_t hw);

	/* Translate device-tree interrupt specifier from raw format coming
	* from the firmware to a irq_hw_number_t (interrupt line number) and
	* type (sense) that can be passed to set_irq_type(). In the absence
	* of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
	* will return the hw number in the first cell and IRQ_TYPE_NONE for
	* the type (which amount to keeping whatever default value the
	* interrupt controller has for that line)
	*/
	int (xlate)(struct irq_host h, struct device_node *ctrler,
	u32 *intspec, unsigned int intsize,
	irq_hw_number_t out_hwirq, unsigned int out_type);
	};

	struct irq_host {
	struct list_head link;

	/* type of reverse mapping technique */
	unsigned int revmap_type;
	#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */
	#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */
	#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */
	#define IRQ_HOST_MAP_TREE 3 /* radix tree */
	union {
	struct {
	unsigned int size;
	unsigned int *revmap;
	} linear;
	struct radix_tree_root tree;
	} revmap_data;
	struct irq_host_ops *ops;
	void *host_data;
	irq_hw_number_t inval_irq;

	/* Optional device node pointer */
	struct device_node *of_node;
	};

	/* The main irq map itself is an array of NR_IRQ entries containing the
	* associate host and irq number. An entry with a host of NULL is free.
	* An entry can be allocated if it's free, the allocator always then sets
	* hwirq first to the host's invalid irq number and then fills ops.
	*/
	struct irq_map_entry {
	irq_hw_number_t hwirq;
	struct irq_host *host;
	};

	extern struct irq_map_entry irq_map[NR_IRQS];

	extern irq_hw_number_t virq_to_hw(unsigned int virq);

	/**
	* irq_alloc_host - Allocate a new irq_host data structure
	* @of_node: optional device-tree node of the interrupt controller
	* @revmap_type: type of reverse mapping to use
	* @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
	* @ops: map/unmap host callbacks
	* @inval_irq: provide a hw number in that host space that is always invalid
	*
	* Allocates and initialize and irq_host structure. Note that in the case of
	* IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
	* for all legacy interrupts except 0 (which is always the invalid irq for
	* a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
	* this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
	* later during boot automatically (the reverse mapping will use the slow path
	* until that happens).
	*/
	extern struct irq_host irq_alloc_host(struct device_node of_node,
	unsigned int revmap_type,
	unsigned int revmap_arg,
	struct irq_host_ops *ops,
	irq_hw_number_t inval_irq);


	/**
	* irq_find_host - Locates a host for a given device node
	* @node: device-tree node of the interrupt controller
	*/
	extern struct irq_host irq_find_host(struct device_node node);


	/**
	* irq_set_default_host - Set a "default" host
	* @host: default host pointer
	*
	* For convenience, it's possible to set a "default" host that will be used
	* whenever NULL is passed to irq_create_mapping(). It makes life easier for
	* platforms that want to manipulate a few hard coded interrupt numbers that
	* aren't properly represented in the device-tree.
	*/
	extern void irq_set_default_host(struct irq_host *host);


	/**
	* irq_set_virq_count - Set the maximum number of virt irqs
	* @count: number of linux virtual irqs, capped with NR_IRQS
	*
	* This is mainly for use by platforms like iSeries who want to program
	* the virtual irq number in the controller to avoid the reverse mapping
	*/
	extern void irq_set_virq_count(unsigned int count);


	/**
	* irq_create_mapping - Map a hardware interrupt into linux virq space
	* @host: host owning this hardware interrupt or NULL for default host
	* @hwirq: hardware irq number in that host space
	*
	* Only one mapping per hardware interrupt is permitted. Returns a linux
	* virq number.
	* If the sense/trigger is to be specified, set_irq_type() should be called
	* on the number returned from that call.
	*/
	extern unsigned int irq_create_mapping(struct irq_host *host,
	irq_hw_number_t hwirq);


	/**
	* irq_dispose_mapping - Unmap an interrupt
	* @virq: linux virq number of the interrupt to unmap
	*/
	extern void irq_dispose_mapping(unsigned int virq);

	/**
	* irq_find_mapping - Find a linux virq from an hw irq number.
	* @host: host owning this hardware interrupt
	* @hwirq: hardware irq number in that host space
	*
	* This is a slow path, for use by generic code. It's expected that an
	* irq controller implementation directly calls the appropriate low level
	* mapping function.
	*/
	extern unsigned int irq_find_mapping(struct irq_host *host,
	irq_hw_number_t hwirq);

	/**
	* irq_create_direct_mapping - Allocate a virq for direct mapping
	* @host: host to allocate the virq for or NULL for default host
	*
	* This routine is used for irq controllers which can choose the hardware
	* interrupt numbers they generate. In such a case it's simplest to use
	* the linux virq as the hardware interrupt number.
	*/
	extern unsigned int irq_create_direct_mapping(struct irq_host *host);

	/**
	* irq_radix_revmap - Find a linux virq from a hw irq number.
	* @host: host owning this hardware interrupt
	* @hwirq: hardware irq number in that host space
	*
	* This is a fast path, for use by irq controller code that uses radix tree
	* revmaps
	*/
	extern unsigned int irq_radix_revmap(struct irq_host *host,
	irq_hw_number_t hwirq);

	/**
	* irq_linear_revmap - Find a linux virq from a hw irq number.
	* @host: host owning this hardware interrupt
	* @hwirq: hardware irq number in that host space
	*
	* This is a fast path, for use by irq controller code that uses linear
	* revmaps. It does fallback to the slow path if the revmap doesn't exist
	* yet and will create the revmap entry with appropriate locking
	*/

	extern unsigned int irq_linear_revmap(struct irq_host *host,
	irq_hw_number_t hwirq);



	/**
	* irq_alloc_virt - Allocate virtual irq numbers
	* @host: host owning these new virtual irqs
	* @count: number of consecutive numbers to allocate
	* @hint: pass a hint number, the allocator will try to use a 1:1 mapping
	*
	* This is a low level function that is used internally by irq_create_mapping()
	* and that can be used by some irq controllers implementations for things
	* like allocating ranges of numbers for MSIs. The revmaps are left untouched.
	*/
	extern unsigned int irq_alloc_virt(struct irq_host *host,
	unsigned int count,
	unsigned int hint);

	/**
	* irq_free_virt - Free virtual irq numbers
	* @virq: virtual irq number of the first interrupt to free
	* @count: number of interrupts to free
	*
	* This function is the opposite of irq_alloc_virt. It will not clear reverse
	* maps, this should be done previously by unmap'ing the interrupt. In fact,
	* all interrupts covered by the range being freed should have been unmapped
	* prior to calling this.
	*/
	extern void irq_free_virt(unsigned int virq, unsigned int count);


	/* -- OF helpers -- */

	/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
	* @controller: Device node of the interrupt controller
	* @inspec: Interrupt specifier from the device-tree
	* @intsize: Size of the interrupt specifier from the device-tree
	*
	* This function is identical to irq_create_mapping except that it takes
	* as input informations straight from the device-tree (typically the results
	* of the of_irq_map_*() functions.
	*/
	extern unsigned int irq_create_of_mapping(struct device_node *controller,
	u32 *intspec, unsigned int intsize);


	/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
	* @device: Device node of the device whose interrupt is to be mapped
	* @index: Index of the interrupt to map
	*
	* This function is a wrapper that chains of_irq_map_one() and
	* irq_create_of_mapping() to make things easier to callers
	*/
	extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);

	/* -- End OF helpers -- */

	/**
	* irq_early_init - Init irq remapping subsystem
	*/
	extern void irq_early_init(void);

	static __inline__ int irq_canonicalize(int irq)
	{
	return irq;
	}

	extern int distribute_irqs;

	struct irqaction;
	struct pt_regs;

	#define __ARCH_HAS_DO_SOFTIRQ

	#if defined(CONFIG_BOOKE) \|\| defined(CONFIG_40x)
	/*
	* Per-cpu stacks for handling critical, debug and machine check
	* level interrupts.
	*/
	extern struct thread_info *critirq_ctx[NR_CPUS];
	extern struct thread_info *dbgirq_ctx[NR_CPUS];
	extern struct thread_info *mcheckirq_ctx[NR_CPUS];
	extern void exc_lvl_ctx_init(void);
	#else
	#define exc_lvl_ctx_init()
	#endif

	#ifdef CONFIG_IRQSTACKS
	/*
	* Per-cpu stacks for handling hard and soft interrupts.
	*/
	extern struct thread_info *hardirq_ctx[NR_CPUS];
	extern struct thread_info *softirq_ctx[NR_CPUS];

	extern void irq_ctx_init(void);
	extern void call_do_softirq(struct thread_info *tp);
	extern int call_handle_irq(int irq, void *p1,
	struct thread_info tp, void func);
	#else
	#define irq_ctx_init()

	#endif /* CONFIG_IRQSTACKS */

	extern void do_IRQ(struct pt_regs *regs);

	#endif /* _ASM_IRQ_H */
	#endif /* __KERNEL__ */