drivers/scsi/megaraid/mega_common.h - arm/linux-arm64-legacy - Git at Google

 /*
  *
  *			Linux MegaRAID device driver
  *
  * Copyright (c) 2003-2004  LSI Logic Corporation.
  *
  *	   This program is free software; you can redistribute it and/or
  *	   modify it under the terms of the GNU General Public License
  *	   as published by the Free Software Foundation; either version
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: mega_common.h
  *
  * Libaray of common routine used by all low-level megaraid drivers
  */

 #ifndef _MEGA_COMMON_H_
 #define _MEGA_COMMON_H_

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/blkdev.h>
 #include <linux/list.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>


 #define LSI_MAX_CHANNELS		16
 #define LSI_MAX_LOGICAL_DRIVES_64LD	(64+1)

 #define HBA_SIGNATURE_64_BIT		0x299
 #define PCI_CONF_AMISIG64		0xa4

 #define MEGA_SCSI_INQ_EVPD		1
 #define MEGA_INVALID_FIELD_IN_CDB	0x24


 /**
  * scb_t - scsi command control block
  * @ccb			: command control block for individual driver
  * @list		: list of control blocks
  * @gp			: general purpose field for LLDs
  * @sno			: all SCBs have a serial number
  * @scp			: associated scsi command
  * @state		: current state of scb
  * @dma_dir		: direction of data transfer
  * @dma_type		: transfer with sg list, buffer, or no data transfer
  * @dev_channel		: actual channel on the device
  * @dev_target		: actual target on the device
  * @status		: completion status
  *
  * This is our central data structure to issue commands the each driver.
  * Driver specific data structures are maintained in the ccb field.
  * scb provides a field 'gp', which can be used by LLD for its own purposes
  *
  * dev_channel and dev_target must be initialized with the actual channel and
  * target on the controller.
  */
 typedef struct {
 	caddr_t			ccb;
 	struct list_head	list;
 	unsigned long		gp;
 	unsigned int		sno;
 	struct scsi_cmnd	*scp;
 	uint32_t		state;
 	uint32_t		dma_direction;
 	uint32_t		dma_type;
 	uint16_t		dev_channel;
 	uint16_t		dev_target;
 	uint32_t		status;
 } scb_t;

 /*
  * SCB states as it transitions from one state to another
  */
 #define SCB_FREE	0x0000	/* on the free list */
 #define SCB_ACTIVE	0x0001	/* off the free list */
 #define SCB_PENDQ	0x0002	/* on the pending queue */
 #define SCB_ISSUED	0x0004	/* issued - owner f/w */
 #define SCB_ABORT	0x0008	/* Got an abort for this one */
 #define SCB_RESET	0x0010	/* Got a reset for this one */

 /*
  * DMA types for scb
  */
 #define MRAID_DMA_NONE	0x0000	/* no data transfer for this command */
 #define MRAID_DMA_WSG	0x0001	/* data transfer using a sg list */
 #define MRAID_DMA_WBUF	0x0002	/* data transfer using a contiguous buffer */


 /**
  * struct adapter_t - driver's initialization structure
  * @aram dpc_h			: tasklet handle
  * @pdev			: pci configuration pointer for kernel
  * @host			: pointer to host structure of mid-layer
  * @lock			: synchronization lock for mid-layer and driver
  * @quiescent			: driver is quiescent for now.
  * @outstanding_cmds		: number of commands pending in the driver
  * @kscb_list			: pointer to the bulk of SCBs pointers for IO
  * @kscb_pool			: pool of free scbs for IO
  * @kscb_pool_lock		: lock for pool of free scbs
  * @pend_list			: pending commands list
  * @pend_list_lock		: exclusion lock for pending commands list
  * @completed_list		: list of completed commands
  * @completed_list_lock		: exclusion lock for list of completed commands
  * @sglen			: max sg elements supported
  * @device_ids			: to convert kernel device addr to our devices.
  * @raid_device			: raid adapter specific pointer
  * @max_channel			: maximum channel number supported - inclusive
  * @max_target			: max target supported - inclusive
  * @max_lun			: max lun supported - inclusive
  * @unique_id			: unique identifier for each adapter
  * @irq				: IRQ for this adapter
  * @ito				: internal timeout value, (-1) means no timeout
  * @ibuf			: buffer to issue internal commands
  * @ibuf_dma_h			: dma handle for the above buffer
  * @uscb_list			: SCB pointers for user cmds, common mgmt module
  * @uscb_pool			: pool of SCBs for user commands
  * @uscb_pool_lock		: exclusion lock for these SCBs
  * @max_cmds			: max outstanding commands
  * @fw_version			: firmware version
  * @bios_version		: bios version
  * @max_cdb_sz			: biggest CDB size supported.
  * @ha				: is high availability present - clustering
  * @init_id			: initiator ID, the default value should be 7
  * @max_sectors			: max sectors per request
  * @cmd_per_lun			: max outstanding commands per LUN
  * @being_detached		: set when unloading, no more mgmt calls
  *
  *
  * mraid_setup_device_map() can be called anytime after the device map is
  * available and MRAID_GET_DEVICE_MAP() can be called whenever the mapping is
  * required, usually from LLD's queue entry point. The formar API sets up the
  * MRAID_IS_LOGICAL(adapter_t *, struct scsi_cmnd *) to find out if the
  * device in question is a logical drive.
  *
  * quiescent flag should be set by the driver if it is not accepting more
  * commands
  *
  * NOTE: The fields of this structures are placed to minimize cache misses
  */

 // amount of space required to store the bios and firmware version strings
 #define VERSION_SIZE	16

 typedef struct {
 	struct tasklet_struct	dpc_h;
 	struct pci_dev		*pdev;
 	struct Scsi_Host	*host;
 	spinlock_t		lock;
 	uint8_t			quiescent;
 	int			outstanding_cmds;
 	scb_t			*kscb_list;
 	struct list_head	kscb_pool;
 	spinlock_t		kscb_pool_lock;
 	struct list_head	pend_list;
 	spinlock_t		pend_list_lock;
 	struct list_head	completed_list;
 	spinlock_t		completed_list_lock;
 	uint16_t		sglen;
 	int			device_ids[LSI_MAX_CHANNELS]
 					[LSI_MAX_LOGICAL_DRIVES_64LD];
 	caddr_t			raid_device;
 	uint8_t			max_channel;
 	uint16_t		max_target;
 	uint8_t			max_lun;

 	uint32_t		unique_id;
 	int			irq;
 	uint8_t			ito;
 	caddr_t			ibuf;
 	dma_addr_t		ibuf_dma_h;
 	scb_t			*uscb_list;
 	struct list_head	uscb_pool;
 	spinlock_t		uscb_pool_lock;
 	int			max_cmds;
 	uint8_t			fw_version[VERSION_SIZE];
 	uint8_t			bios_version[VERSION_SIZE];
 	uint8_t			max_cdb_sz;
 	uint8_t			ha;
 	uint16_t		init_id;
 	uint16_t		max_sectors;
 	uint16_t		cmd_per_lun;
 	atomic_t		being_detached;
 } adapter_t;

 #define SCSI_FREE_LIST_LOCK(adapter)	(&adapter->kscb_pool_lock)
 #define USER_FREE_LIST_LOCK(adapter)	(&adapter->uscb_pool_lock)
 #define PENDING_LIST_LOCK(adapter)	(&adapter->pend_list_lock)
 #define COMPLETED_LIST_LOCK(adapter)	(&adapter->completed_list_lock)


 // conversion from scsi command
 #define SCP2HOST(scp)			(scp)->device->host	// to host
 #define SCP2HOSTDATA(scp)		SCP2HOST(scp)->hostdata	// to soft state
 #define SCP2CHANNEL(scp)		(scp)->device->channel	// to channel
 #define SCP2TARGET(scp)			(scp)->device->id	// to target
 #define SCP2LUN(scp)			(scp)->device->lun	// to LUN

 // generic macro to convert scsi command and host to controller's soft state
 #define SCSIHOST2ADAP(host)	(((caddr_t *)(host->hostdata))[0])
 #define SCP2ADAPTER(scp)	(adapter_t *)SCSIHOST2ADAP(SCP2HOST(scp))


 #define MRAID_IS_LOGICAL(adp, scp)	\
 	(SCP2CHANNEL(scp) == (adp)->max_channel) ? 1 : 0

 #define MRAID_IS_LOGICAL_SDEV(adp, sdev)	\
 	(sdev->channel == (adp)->max_channel) ? 1 : 0

 /**
  * MRAID_GET_DEVICE_MAP - device ids
  * @adp			: adapter's soft state
  * @scp			: mid-layer scsi command pointer
  * @p_chan		: physical channel on the controller
  * @target		: target id of the device or logical drive number
  * @islogical		: set if the command is for the logical drive
  *
  * Macro to retrieve information about device class, logical or physical and
  * the corresponding physical channel and target or logical drive number
  */
 #define MRAID_GET_DEVICE_MAP(adp, scp, p_chan, target, islogical)	\
 	/*								\
 	 * Is the request coming for the virtual channel		\
 	 */								\
 	islogical = MRAID_IS_LOGICAL(adp, scp);				\
 									\
 	/*								\
 	 * Get an index into our table of drive ids mapping		\
 	 */								\
 	if (islogical) {						\
 		p_chan = 0xFF;						\
 		target =						\
 		(adp)->device_ids[(adp)->max_channel][SCP2TARGET(scp)];	\
 	}								\
 	else {								\
 		p_chan = ((adp)->device_ids[SCP2CHANNEL(scp)]		\
 					[SCP2TARGET(scp)] >> 8) & 0xFF;	\
 		target = ((adp)->device_ids[SCP2CHANNEL(scp)]		\
 					[SCP2TARGET(scp)] & 0xFF);	\
 	}

 /*
  * ### Helper routines ###
  */
 #define LSI_DBGLVL mraid_debug_level	// each LLD must define a global
  					// mraid_debug_level

 #ifdef DEBUG
 #if defined (_ASSERT_PANIC)
 #define ASSERT_ACTION	panic
 #else
 #define ASSERT_ACTION	printk
 #endif

 #define ASSERT(expression)						\
 	if (!(expression)) {						\
 	ASSERT_ACTION("assertion failed:(%s), file: %s, line: %d:%s\n",	\
 			#expression, __FILE__, __LINE__, __FUNCTION__);	\
 	}
 #else
 #define ASSERT(expression)
 #endif

 /**
  * struct mraid_pci_blk - structure holds DMA memory block info
  * @vaddr		: virtual address to a memory block
  * @dma_addr		: DMA handle to a memory block
  *
  * This structure is filled up for the caller. It is the responsibilty of the
  * caller to allocate this array big enough to store addresses for all
  * requested elements
  */
 struct mraid_pci_blk {
 	caddr_t		vaddr;
 	dma_addr_t	dma_addr;
 };

 #endif // _MEGA_COMMON_H_

 // vim: set ts=8 sw=8 tw=78:
	/*
	*
	* Linux MegaRAID device driver
	*
	* Copyright (c) 2003-2004 LSI Logic Corporation.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*
	* FILE : mega_common.h
	*
	* Libaray of common routine used by all low-level megaraid drivers
	*/

	#ifndef _MEGA_COMMON_H_
	#define _MEGA_COMMON_H_

	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/pci.h>
	#include <linux/spinlock.h>
	#include <linux/mutex.h>
	#include <linux/interrupt.h>
	#include <linux/delay.h>
	#include <linux/blkdev.h>
	#include <linux/list.h>
	#include <linux/moduleparam.h>
	#include <linux/dma-mapping.h>
	#include <scsi/scsi.h>
	#include <scsi/scsi_cmnd.h>
	#include <scsi/scsi_device.h>
	#include <scsi/scsi_host.h>


	#define LSI_MAX_CHANNELS 16
	#define LSI_MAX_LOGICAL_DRIVES_64LD (64+1)

	#define HBA_SIGNATURE_64_BIT 0x299
	#define PCI_CONF_AMISIG64 0xa4

	#define MEGA_SCSI_INQ_EVPD 1
	#define MEGA_INVALID_FIELD_IN_CDB 0x24


	/**
	* scb_t - scsi command control block
	* @ccb : command control block for individual driver
	* @list : list of control blocks
	* @gp : general purpose field for LLDs
	* @sno : all SCBs have a serial number
	* @scp : associated scsi command
	* @state : current state of scb
	* @dma_dir : direction of data transfer
	* @dma_type : transfer with sg list, buffer, or no data transfer
	* @dev_channel : actual channel on the device
	* @dev_target : actual target on the device
	* @status : completion status
	*
	* This is our central data structure to issue commands the each driver.
	* Driver specific data structures are maintained in the ccb field.
	* scb provides a field 'gp', which can be used by LLD for its own purposes
	*
	* dev_channel and dev_target must be initialized with the actual channel and
	* target on the controller.
	*/
	typedef struct {
	caddr_t ccb;
	struct list_head list;
	unsigned long gp;
	unsigned int sno;
	struct scsi_cmnd *scp;
	uint32_t state;
	uint32_t dma_direction;
	uint32_t dma_type;
	uint16_t dev_channel;
	uint16_t dev_target;
	uint32_t status;
	} scb_t;

	/*
	* SCB states as it transitions from one state to another
	*/
	#define SCB_FREE 0x0000 /* on the free list */
	#define SCB_ACTIVE 0x0001 /* off the free list */
	#define SCB_PENDQ 0x0002 /* on the pending queue */
	#define SCB_ISSUED 0x0004 /* issued - owner f/w */
	#define SCB_ABORT 0x0008 /* Got an abort for this one */
	#define SCB_RESET 0x0010 /* Got a reset for this one */

	/*
	* DMA types for scb
	*/
	#define MRAID_DMA_NONE 0x0000 /* no data transfer for this command */
	#define MRAID_DMA_WSG 0x0001 /* data transfer using a sg list */
	#define MRAID_DMA_WBUF 0x0002 /* data transfer using a contiguous buffer */


	/**
	* struct adapter_t - driver's initialization structure
	* @aram dpc_h : tasklet handle
	* @pdev : pci configuration pointer for kernel
	* @host : pointer to host structure of mid-layer
	* @lock : synchronization lock for mid-layer and driver
	* @quiescent : driver is quiescent for now.
	* @outstanding_cmds : number of commands pending in the driver
	* @kscb_list : pointer to the bulk of SCBs pointers for IO
	* @kscb_pool : pool of free scbs for IO
	* @kscb_pool_lock : lock for pool of free scbs
	* @pend_list : pending commands list
	* @pend_list_lock : exclusion lock for pending commands list
	* @completed_list : list of completed commands
	* @completed_list_lock : exclusion lock for list of completed commands
	* @sglen : max sg elements supported
	* @device_ids : to convert kernel device addr to our devices.
	* @raid_device : raid adapter specific pointer
	* @max_channel : maximum channel number supported - inclusive
	* @max_target : max target supported - inclusive
	* @max_lun : max lun supported - inclusive
	* @unique_id : unique identifier for each adapter
	* @irq : IRQ for this adapter
	* @ito : internal timeout value, (-1) means no timeout
	* @ibuf : buffer to issue internal commands
	* @ibuf_dma_h : dma handle for the above buffer
	* @uscb_list : SCB pointers for user cmds, common mgmt module
	* @uscb_pool : pool of SCBs for user commands
	* @uscb_pool_lock : exclusion lock for these SCBs
	* @max_cmds : max outstanding commands
	* @fw_version : firmware version
	* @bios_version : bios version
	* @max_cdb_sz : biggest CDB size supported.
	* @ha : is high availability present - clustering
	* @init_id : initiator ID, the default value should be 7
	* @max_sectors : max sectors per request
	* @cmd_per_lun : max outstanding commands per LUN
	* @being_detached : set when unloading, no more mgmt calls
	*
	*
	* mraid_setup_device_map() can be called anytime after the device map is
	* available and MRAID_GET_DEVICE_MAP() can be called whenever the mapping is
	* required, usually from LLD's queue entry point. The formar API sets up the
	* MRAID_IS_LOGICAL(adapter_t , struct scsi_cmnd ) to find out if the
	* device in question is a logical drive.
	*
	* quiescent flag should be set by the driver if it is not accepting more
	* commands
	*
	* NOTE: The fields of this structures are placed to minimize cache misses
	*/

	// amount of space required to store the bios and firmware version strings
	#define VERSION_SIZE 16

	typedef struct {
	struct tasklet_struct dpc_h;
	struct pci_dev *pdev;
	struct Scsi_Host *host;
	spinlock_t lock;
	uint8_t quiescent;
	int outstanding_cmds;
	scb_t *kscb_list;
	struct list_head kscb_pool;
	spinlock_t kscb_pool_lock;
	struct list_head pend_list;
	spinlock_t pend_list_lock;
	struct list_head completed_list;
	spinlock_t completed_list_lock;
	uint16_t sglen;
	int device_ids[LSI_MAX_CHANNELS]
	[LSI_MAX_LOGICAL_DRIVES_64LD];
	caddr_t raid_device;
	uint8_t max_channel;
	uint16_t max_target;
	uint8_t max_lun;

	uint32_t unique_id;
	int irq;
	uint8_t ito;
	caddr_t ibuf;
	dma_addr_t ibuf_dma_h;
	scb_t *uscb_list;
	struct list_head uscb_pool;
	spinlock_t uscb_pool_lock;
	int max_cmds;
	uint8_t fw_version[VERSION_SIZE];
	uint8_t bios_version[VERSION_SIZE];
	uint8_t max_cdb_sz;
	uint8_t ha;
	uint16_t init_id;
	uint16_t max_sectors;
	uint16_t cmd_per_lun;
	atomic_t being_detached;
	} adapter_t;

	#define SCSI_FREE_LIST_LOCK(adapter) (&adapter->kscb_pool_lock)
	#define USER_FREE_LIST_LOCK(adapter) (&adapter->uscb_pool_lock)
	#define PENDING_LIST_LOCK(adapter) (&adapter->pend_list_lock)
	#define COMPLETED_LIST_LOCK(adapter) (&adapter->completed_list_lock)


	// conversion from scsi command
	#define SCP2HOST(scp) (scp)->device->host // to host
	#define SCP2HOSTDATA(scp) SCP2HOST(scp)->hostdata // to soft state
	#define SCP2CHANNEL(scp) (scp)->device->channel // to channel
	#define SCP2TARGET(scp) (scp)->device->id // to target
	#define SCP2LUN(scp) (scp)->device->lun // to LUN

	// generic macro to convert scsi command and host to controller's soft state
	#define SCSIHOST2ADAP(host) (((caddr_t *)(host->hostdata))[0])
	#define SCP2ADAPTER(scp) (adapter_t *)SCSIHOST2ADAP(SCP2HOST(scp))


	#define MRAID_IS_LOGICAL(adp, scp) \
	(SCP2CHANNEL(scp) == (adp)->max_channel) ? 1 : 0

	#define MRAID_IS_LOGICAL_SDEV(adp, sdev) \
	(sdev->channel == (adp)->max_channel) ? 1 : 0

	/**
	* MRAID_GET_DEVICE_MAP - device ids
	* @adp : adapter's soft state
	* @scp : mid-layer scsi command pointer
	* @p_chan : physical channel on the controller
	* @target : target id of the device or logical drive number
	* @islogical : set if the command is for the logical drive
	*
	* Macro to retrieve information about device class, logical or physical and
	* the corresponding physical channel and target or logical drive number
	*/
	#define MRAID_GET_DEVICE_MAP(adp, scp, p_chan, target, islogical) \
	/* \
	* Is the request coming for the virtual channel \
	*/ \
	islogical = MRAID_IS_LOGICAL(adp, scp); \
	\
	/* \
	* Get an index into our table of drive ids mapping \
	*/ \
	if (islogical) { \
	p_chan = 0xFF; \
	target = \
	(adp)->device_ids[(adp)->max_channel][SCP2TARGET(scp)]; \
	} \
	else { \
	p_chan = ((adp)->device_ids[SCP2CHANNEL(scp)] \
	[SCP2TARGET(scp)] >> 8) & 0xFF; \
	target = ((adp)->device_ids[SCP2CHANNEL(scp)] \
	[SCP2TARGET(scp)] & 0xFF); \
	}

	/*
	* ### Helper routines ###
	*/
	#define LSI_DBGLVL mraid_debug_level // each LLD must define a global
	// mraid_debug_level

	#ifdef DEBUG
	#if defined (_ASSERT_PANIC)
	#define ASSERT_ACTION panic
	#else
	#define ASSERT_ACTION printk
	#endif

	#define ASSERT(expression) \
	if (!(expression)) { \
	ASSERT_ACTION("assertion failed:(%s), file: %s, line: %d:%s\n", \
	#expression, __FILE__, __LINE__, __FUNCTION__); \
	}
	#else
	#define ASSERT(expression)
	#endif

	/**
	* struct mraid_pci_blk - structure holds DMA memory block info
	* @vaddr : virtual address to a memory block
	* @dma_addr : DMA handle to a memory block
	*
	* This structure is filled up for the caller. It is the responsibilty of the
	* caller to allocate this array big enough to store addresses for all
	* requested elements
	*/
	struct mraid_pci_blk {
	caddr_t vaddr;
	dma_addr_t dma_addr;
	};

	#endif // _MEGA_COMMON_H_

	// vim: set ts=8 sw=8 tw=78: