| /* |
| * Copyright (c) 2000-2013 LSI Corporation. |
| * |
| * |
| * Name: mpi2_ioc.h |
| * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages |
| * Creation Date: October 11, 2006 |
| * |
| * mpi2_ioc.h Version: 02.00.22 |
| * |
| * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 |
| * prefix are for use only on MPI v2.5 products, and must not be used |
| * with MPI v2.0 products. Unless otherwise noted, names beginning with |
| * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. |
| * |
| * Version History |
| * --------------- |
| * |
| * Date Version Description |
| * -------- -------- ------------------------------------------------------ |
| * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. |
| * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to |
| * MaxTargets. |
| * Added TotalImageSize field to FWDownload Request. |
| * Added reserved words to FWUpload Request. |
| * 06-26-07 02.00.02 Added IR Configuration Change List Event. |
| * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit |
| * request and replaced it with |
| * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. |
| * Replaced the MinReplyQueueDepth field of the IOCFacts |
| * reply with MaxReplyDescriptorPostQueueDepth. |
| * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum |
| * depth for the Reply Descriptor Post Queue. |
| * Added SASAddress field to Initiator Device Table |
| * Overflow Event data. |
| * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING |
| * for SAS Initiator Device Status Change Event data. |
| * Modified Reason Code defines for SAS Topology Change |
| * List Event data, including adding a bit for PHY Vacant |
| * status, and adding a mask for the Reason Code. |
| * Added define for |
| * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. |
| * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. |
| * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of |
| * the IOCFacts Reply. |
| * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. |
| * Moved MPI2_VERSION_UNION to mpi2.h. |
| * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks |
| * instead of enables, and added SASBroadcastPrimitiveMasks |
| * field. |
| * Added Log Entry Added Event and related structure. |
| * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. |
| * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. |
| * Added MaxVolumes and MaxPersistentEntries fields to |
| * IOCFacts reply. |
| * Added ProtocalFlags and IOCCapabilities fields to |
| * MPI2_FW_IMAGE_HEADER. |
| * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. |
| * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to |
| * a U16 (from a U32). |
| * Removed extra 's' from EventMasks name. |
| * 06-27-08 02.00.08 Fixed an offset in a comment. |
| * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. |
| * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and |
| * renamed MinReplyFrameSize to ReplyFrameSize. |
| * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. |
| * Added two new RAIDOperation values for Integrated RAID |
| * Operations Status Event data. |
| * Added four new IR Configuration Change List Event data |
| * ReasonCode values. |
| * Added two new ReasonCode defines for SAS Device Status |
| * Change Event data. |
| * Added three new DiscoveryStatus bits for the SAS |
| * Discovery event data. |
| * Added Multiplexing Status Change bit to the PhyStatus |
| * field of the SAS Topology Change List event data. |
| * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. |
| * BootFlags are now product-specific. |
| * Added defines for the indivdual signature bytes |
| * for MPI2_INIT_IMAGE_FOOTER. |
| * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. |
| * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR |
| * define. |
| * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE |
| * define. |
| * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. |
| * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. |
| * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. |
| * Added two new reason codes for SAS Device Status Change |
| * Event. |
| * Added new event: SAS PHY Counter. |
| * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. |
| * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. |
| * Added new product id family for 2208. |
| * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. |
| * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. |
| * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. |
| * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. |
| * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. |
| * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. |
| * Added Host Based Discovery Phy Event data. |
| * Added defines for ProductID Product field |
| * (MPI2_FW_HEADER_PID_). |
| * Modified values for SAS ProductID Family |
| * (MPI2_FW_HEADER_PID_FAMILY_). |
| * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. |
| * Added PowerManagementControl Request structures and |
| * defines. |
| * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. |
| * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. |
| * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. |
| * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added |
| * SASNotifyPrimitiveMasks field to |
| * MPI2_EVENT_NOTIFICATION_REQUEST. |
| * Added Temperature Threshold Event. |
| * Added Host Message Event. |
| * Added Send Host Message request and reply. |
| * 05-25-11 02.00.18 For Extended Image Header, added |
| * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and |
| * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. |
| * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. |
| * 08-24-11 02.00.19 Added PhysicalPort field to |
| * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. |
| * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. |
| * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. |
| * 03-29-12 02.00.21 Added a product specific range to event values. |
| * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. |
| * Added ElapsedSeconds field to |
| * MPI2_EVENT_DATA_IR_OPERATION_STATUS. |
| * -------------------------------------------------------------------------- |
| */ |
| |
| #ifndef MPI2_IOC_H |
| #define MPI2_IOC_H |
| |
| /***************************************************************************** |
| * |
| * IOC Messages |
| * |
| *****************************************************************************/ |
| |
| /**************************************************************************** |
| * IOCInit message |
| ****************************************************************************/ |
| |
| /*IOCInit Request message */ |
| typedef struct _MPI2_IOC_INIT_REQUEST { |
| U8 WhoInit; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 MsgVersion; /*0x0C */ |
| U16 HeaderVersion; /*0x0E */ |
| U32 Reserved5; /*0x10 */ |
| U16 Reserved6; /*0x14 */ |
| U8 Reserved7; /*0x16 */ |
| U8 HostMSIxVectors; /*0x17 */ |
| U16 Reserved8; /*0x18 */ |
| U16 SystemRequestFrameSize; /*0x1A */ |
| U16 ReplyDescriptorPostQueueDepth; /*0x1C */ |
| U16 ReplyFreeQueueDepth; /*0x1E */ |
| U32 SenseBufferAddressHigh; /*0x20 */ |
| U32 SystemReplyAddressHigh; /*0x24 */ |
| U64 SystemRequestFrameBaseAddress; /*0x28 */ |
| U64 ReplyDescriptorPostQueueAddress; /*0x30 */ |
| U64 ReplyFreeQueueAddress; /*0x38 */ |
| U64 TimeStamp; /*0x40 */ |
| } MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST, |
| Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t; |
| |
| /*WhoInit values */ |
| #define MPI2_WHOINIT_NOT_INITIALIZED (0x00) |
| #define MPI2_WHOINIT_SYSTEM_BIOS (0x01) |
| #define MPI2_WHOINIT_ROM_BIOS (0x02) |
| #define MPI2_WHOINIT_PCI_PEER (0x03) |
| #define MPI2_WHOINIT_HOST_DRIVER (0x04) |
| #define MPI2_WHOINIT_MANUFACTURER (0x05) |
| |
| /*MsgVersion */ |
| #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) |
| #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) |
| #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) |
| #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) |
| |
| /*HeaderVersion */ |
| #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) |
| #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) |
| #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) |
| #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) |
| |
| /*minimum depth for the Reply Descriptor Post Queue */ |
| #define MPI2_RDPQ_DEPTH_MIN (16) |
| |
| /*IOCInit Reply message */ |
| typedef struct _MPI2_IOC_INIT_REPLY { |
| U8 WhoInit; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Reserved5; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| } MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY, |
| Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t; |
| |
| /**************************************************************************** |
| * IOCFacts message |
| ****************************************************************************/ |
| |
| /*IOCFacts Request message */ |
| typedef struct _MPI2_IOC_FACTS_REQUEST { |
| U16 Reserved1; /*0x00 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| } MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST, |
| Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t; |
| |
| /*IOCFacts Reply message */ |
| typedef struct _MPI2_IOC_FACTS_REPLY { |
| U16 MsgVersion; /*0x00 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 HeaderVersion; /*0x04 */ |
| U8 IOCNumber; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved1; /*0x0A */ |
| U16 IOCExceptions; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| U8 MaxChainDepth; /*0x14 */ |
| U8 WhoInit; /*0x15 */ |
| U8 NumberOfPorts; /*0x16 */ |
| U8 MaxMSIxVectors; /*0x17 */ |
| U16 RequestCredit; /*0x18 */ |
| U16 ProductID; /*0x1A */ |
| U32 IOCCapabilities; /*0x1C */ |
| MPI2_VERSION_UNION FWVersion; /*0x20 */ |
| U16 IOCRequestFrameSize; /*0x24 */ |
| U16 IOCMaxChainSegmentSize; /*0x26 */ |
| U16 MaxInitiators; /*0x28 */ |
| U16 MaxTargets; /*0x2A */ |
| U16 MaxSasExpanders; /*0x2C */ |
| U16 MaxEnclosures; /*0x2E */ |
| U16 ProtocolFlags; /*0x30 */ |
| U16 HighPriorityCredit; /*0x32 */ |
| U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */ |
| U8 ReplyFrameSize; /*0x36 */ |
| U8 MaxVolumes; /*0x37 */ |
| U16 MaxDevHandle; /*0x38 */ |
| U16 MaxPersistentEntries; /*0x3A */ |
| U16 MinDevHandle; /*0x3C */ |
| U16 Reserved4; /*0x3E */ |
| } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, |
| Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; |
| |
| /*MsgVersion */ |
| #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) |
| #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) |
| #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) |
| #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) |
| |
| /*HeaderVersion */ |
| #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) |
| #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) |
| #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) |
| #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) |
| |
| /*IOCExceptions */ |
| #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) |
| #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) |
| |
| #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) |
| #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) |
| #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) |
| #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) |
| #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) |
| |
| #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) |
| #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) |
| #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) |
| #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) |
| #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) |
| |
| /*defines for WhoInit field are after the IOCInit Request */ |
| |
| /*ProductID field uses MPI2_FW_HEADER_PID_ */ |
| |
| /*IOCCapabilities */ |
| #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) |
| #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) |
| #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) |
| #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) |
| #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) |
| #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) |
| #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) |
| #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) |
| #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) |
| #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) |
| #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) |
| #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) |
| #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) |
| #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) |
| |
| /*ProtocolFlags */ |
| #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) |
| #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) |
| |
| /**************************************************************************** |
| * PortFacts message |
| ****************************************************************************/ |
| |
| /*PortFacts Request message */ |
| typedef struct _MPI2_PORT_FACTS_REQUEST { |
| U16 Reserved1; /*0x00 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 PortNumber; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved3; /*0x0A */ |
| } MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST, |
| Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t; |
| |
| /*PortFacts Reply message */ |
| typedef struct _MPI2_PORT_FACTS_REPLY { |
| U16 Reserved1; /*0x00 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 PortNumber; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved3; /*0x0A */ |
| U16 Reserved4; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| U8 Reserved5; /*0x14 */ |
| U8 PortType; /*0x15 */ |
| U16 Reserved6; /*0x16 */ |
| U16 MaxPostedCmdBuffers; /*0x18 */ |
| U16 Reserved7; /*0x1A */ |
| } MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY, |
| Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t; |
| |
| /*PortType values */ |
| #define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) |
| #define MPI2_PORTFACTS_PORTTYPE_FC (0x10) |
| #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) |
| #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) |
| #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) |
| |
| /**************************************************************************** |
| * PortEnable message |
| ****************************************************************************/ |
| |
| /*PortEnable Request message */ |
| typedef struct _MPI2_PORT_ENABLE_REQUEST { |
| U16 Reserved1; /*0x00 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U8 Reserved2; /*0x04 */ |
| U8 PortFlags; /*0x05 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| } MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST, |
| Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t; |
| |
| /*PortEnable Reply message */ |
| typedef struct _MPI2_PORT_ENABLE_REPLY { |
| U16 Reserved1; /*0x00 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U8 Reserved2; /*0x04 */ |
| U8 PortFlags; /*0x05 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Reserved5; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| } MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY, |
| Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t; |
| |
| /**************************************************************************** |
| * EventNotification message |
| ****************************************************************************/ |
| |
| /*EventNotification Request message */ |
| #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) |
| |
| typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { |
| U16 Reserved1; /*0x00 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U32 Reserved5; /*0x0C */ |
| U32 Reserved6; /*0x10 */ |
| U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */ |
| U16 SASBroadcastPrimitiveMasks; /*0x24 */ |
| U16 SASNotifyPrimitiveMasks; /*0x26 */ |
| U32 Reserved8; /*0x28 */ |
| } MPI2_EVENT_NOTIFICATION_REQUEST, |
| *PTR_MPI2_EVENT_NOTIFICATION_REQUEST, |
| Mpi2EventNotificationRequest_t, |
| *pMpi2EventNotificationRequest_t; |
| |
| /*EventNotification Reply message */ |
| typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { |
| U16 EventDataLength; /*0x00 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved1; /*0x04 */ |
| U8 AckRequired; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved2; /*0x0A */ |
| U16 Reserved3; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| U16 Event; /*0x14 */ |
| U16 Reserved4; /*0x16 */ |
| U32 EventContext; /*0x18 */ |
| U32 EventData[1]; /*0x1C */ |
| } MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, |
| Mpi2EventNotificationReply_t, |
| *pMpi2EventNotificationReply_t; |
| |
| /*AckRequired */ |
| #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) |
| #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) |
| |
| /*Event */ |
| #define MPI2_EVENT_LOG_DATA (0x0001) |
| #define MPI2_EVENT_STATE_CHANGE (0x0002) |
| #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) |
| #define MPI2_EVENT_EVENT_CHANGE (0x000A) |
| #define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */ |
| #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) |
| #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) |
| #define MPI2_EVENT_SAS_DISCOVERY (0x0016) |
| #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) |
| #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) |
| #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) |
| #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) |
| #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) |
| #define MPI2_EVENT_IR_VOLUME (0x001E) |
| #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) |
| #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) |
| #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) |
| #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) |
| #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) |
| #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) |
| #define MPI2_EVENT_SAS_QUIESCE (0x0025) |
| #define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) |
| #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) |
| #define MPI2_EVENT_HOST_MESSAGE (0x0028) |
| #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) |
| #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) |
| #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) |
| |
| /*Log Entry Added Event data */ |
| |
| /*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ |
| #define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) |
| |
| typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { |
| U64 TimeStamp; /*0x00 */ |
| U32 Reserved1; /*0x08 */ |
| U16 LogSequence; /*0x0C */ |
| U16 LogEntryQualifier; /*0x0E */ |
| U8 VP_ID; /*0x10 */ |
| U8 VF_ID; /*0x11 */ |
| U16 Reserved2; /*0x12 */ |
| U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */ |
| } MPI2_EVENT_DATA_LOG_ENTRY_ADDED, |
| *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, |
| Mpi2EventDataLogEntryAdded_t, |
| *pMpi2EventDataLogEntryAdded_t; |
| |
| /*GPIO Interrupt Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { |
| U8 GPIONum; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| } MPI2_EVENT_DATA_GPIO_INTERRUPT, |
| *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, |
| Mpi2EventDataGpioInterrupt_t, |
| *pMpi2EventDataGpioInterrupt_t; |
| |
| /*Temperature Threshold Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_TEMPERATURE { |
| U16 Status; /*0x00 */ |
| U8 SensorNum; /*0x02 */ |
| U8 Reserved1; /*0x03 */ |
| U16 CurrentTemperature; /*0x04 */ |
| U16 Reserved2; /*0x06 */ |
| U32 Reserved3; /*0x08 */ |
| U32 Reserved4; /*0x0C */ |
| } MPI2_EVENT_DATA_TEMPERATURE, |
| *PTR_MPI2_EVENT_DATA_TEMPERATURE, |
| Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t; |
| |
| /*Temperature Threshold Event data Status bits */ |
| #define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) |
| #define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) |
| #define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) |
| #define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) |
| |
| /*Host Message Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { |
| U8 SourceVF_ID; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U32 Reserved3; /*0x04 */ |
| U32 HostData[1]; /*0x08 */ |
| } MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, |
| Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; |
| |
| /*Power Performance Change Event */ |
| |
| typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { |
| U8 CurrentPowerMode; /*0x00 */ |
| U8 PreviousPowerMode; /*0x01 */ |
| U16 Reserved1; /*0x02 */ |
| } MPI2_EVENT_DATA_POWER_PERF_CHANGE, |
| *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, |
| Mpi2EventDataPowerPerfChange_t, |
| *pMpi2EventDataPowerPerfChange_t; |
| |
| /*defines for CurrentPowerMode and PreviousPowerMode fields */ |
| #define MPI2_EVENT_PM_INIT_MASK (0xC0) |
| #define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) |
| #define MPI2_EVENT_PM_INIT_HOST (0x40) |
| #define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) |
| #define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) |
| |
| #define MPI2_EVENT_PM_MODE_MASK (0x07) |
| #define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) |
| #define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) |
| #define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) |
| #define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) |
| #define MPI2_EVENT_PM_MODE_STANDBY (0x06) |
| |
| /*Hard Reset Received Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { |
| U8 Reserved1; /*0x00 */ |
| U8 Port; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| } MPI2_EVENT_DATA_HARD_RESET_RECEIVED, |
| *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, |
| Mpi2EventDataHardResetReceived_t, |
| *pMpi2EventDataHardResetReceived_t; |
| |
| /*Task Set Full Event data */ |
| /* this event is obsolete */ |
| |
| typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { |
| U16 DevHandle; /*0x00 */ |
| U16 CurrentDepth; /*0x02 */ |
| } MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL, |
| Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t; |
| |
| /*SAS Device Status Change Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { |
| U16 TaskTag; /*0x00 */ |
| U8 ReasonCode; /*0x02 */ |
| U8 PhysicalPort; /*0x03 */ |
| U8 ASC; /*0x04 */ |
| U8 ASCQ; /*0x05 */ |
| U16 DevHandle; /*0x06 */ |
| U32 Reserved2; /*0x08 */ |
| U64 SASAddress; /*0x0C */ |
| U8 LUN[8]; /*0x14 */ |
| } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, |
| *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, |
| Mpi2EventDataSasDeviceStatusChange_t, |
| *pMpi2EventDataSasDeviceStatusChange_t; |
| |
| /*SAS Device Status Change Event data ReasonCode values */ |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) |
| #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) |
| |
| /*Integrated RAID Operation Status Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { |
| U16 VolDevHandle; /*0x00 */ |
| U16 Reserved1; /*0x02 */ |
| U8 RAIDOperation; /*0x04 */ |
| U8 PercentComplete; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| U32 ElapsedSeconds; /*0x08 */ |
| } MPI2_EVENT_DATA_IR_OPERATION_STATUS, |
| *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, |
| Mpi2EventDataIrOperationStatus_t, |
| *pMpi2EventDataIrOperationStatus_t; |
| |
| /*Integrated RAID Operation Status Event data RAIDOperation values */ |
| #define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) |
| #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) |
| #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) |
| #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) |
| #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) |
| |
| /*Integrated RAID Volume Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_IR_VOLUME { |
| U16 VolDevHandle; /*0x00 */ |
| U8 ReasonCode; /*0x02 */ |
| U8 Reserved1; /*0x03 */ |
| U32 NewValue; /*0x04 */ |
| U32 PreviousValue; /*0x08 */ |
| } MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME, |
| Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t; |
| |
| /*Integrated RAID Volume Event data ReasonCode values */ |
| #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) |
| #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) |
| #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) |
| |
| /*Integrated RAID Physical Disk Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { |
| U16 Reserved1; /*0x00 */ |
| U8 ReasonCode; /*0x02 */ |
| U8 PhysDiskNum; /*0x03 */ |
| U16 PhysDiskDevHandle; /*0x04 */ |
| U16 Reserved2; /*0x06 */ |
| U16 Slot; /*0x08 */ |
| U16 EnclosureHandle; /*0x0A */ |
| U32 NewValue; /*0x0C */ |
| U32 PreviousValue; /*0x10 */ |
| } MPI2_EVENT_DATA_IR_PHYSICAL_DISK, |
| *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, |
| Mpi2EventDataIrPhysicalDisk_t, |
| *pMpi2EventDataIrPhysicalDisk_t; |
| |
| /*Integrated RAID Physical Disk Event data ReasonCode values */ |
| #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) |
| #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) |
| #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) |
| |
| /*Integrated RAID Configuration Change List Event data */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check NumElements at runtime. |
| */ |
| #ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT |
| #define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) |
| #endif |
| |
| typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { |
| U16 ElementFlags; /*0x00 */ |
| U16 VolDevHandle; /*0x02 */ |
| U8 ReasonCode; /*0x04 */ |
| U8 PhysDiskNum; /*0x05 */ |
| U16 PhysDiskDevHandle; /*0x06 */ |
| } MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, |
| Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t; |
| |
| /*IR Configuration Change List Event data ElementFlags values */ |
| #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) |
| #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) |
| #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) |
| #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) |
| |
| /*IR Configuration Change List Event data ReasonCode values */ |
| #define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) |
| #define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) |
| #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) |
| #define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) |
| #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) |
| #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) |
| #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) |
| #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) |
| #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) |
| |
| typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { |
| U8 NumElements; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 Reserved2; /*0x02 */ |
| U8 ConfigNum; /*0x03 */ |
| U32 Flags; /*0x04 */ |
| MPI2_EVENT_IR_CONFIG_ELEMENT |
| ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */ |
| } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, |
| *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, |
| Mpi2EventDataIrConfigChangeList_t, |
| *pMpi2EventDataIrConfigChangeList_t; |
| |
| /*IR Configuration Change List Event data Flags values */ |
| #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) |
| |
| /*SAS Discovery Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { |
| U8 Flags; /*0x00 */ |
| U8 ReasonCode; /*0x01 */ |
| U8 PhysicalPort; /*0x02 */ |
| U8 Reserved1; /*0x03 */ |
| U32 DiscoveryStatus; /*0x04 */ |
| } MPI2_EVENT_DATA_SAS_DISCOVERY, |
| *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, |
| Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t; |
| |
| /*SAS Discovery Event data Flags values */ |
| #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) |
| #define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) |
| |
| /*SAS Discovery Event data ReasonCode values */ |
| #define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) |
| #define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) |
| |
| /*SAS Discovery Event data DiscoveryStatus values */ |
| #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) |
| #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) |
| #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) |
| #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) |
| #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) |
| #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) |
| #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) |
| #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) |
| #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) |
| #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) |
| #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) |
| #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) |
| #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) |
| #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) |
| #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) |
| #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) |
| #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) |
| #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) |
| #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) |
| #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) |
| |
| /*SAS Broadcast Primitive Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { |
| U8 PhyNum; /*0x00 */ |
| U8 Port; /*0x01 */ |
| U8 PortWidth; /*0x02 */ |
| U8 Primitive; /*0x03 */ |
| } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, |
| *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, |
| Mpi2EventDataSasBroadcastPrimitive_t, |
| *pMpi2EventDataSasBroadcastPrimitive_t; |
| |
| /*defines for the Primitive field */ |
| #define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) |
| #define MPI2_EVENT_PRIMITIVE_SES (0x02) |
| #define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) |
| #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) |
| #define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) |
| #define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) |
| #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) |
| #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) |
| |
| /*SAS Notify Primitive Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { |
| U8 PhyNum; /*0x00 */ |
| U8 Port; /*0x01 */ |
| U8 Reserved1; /*0x02 */ |
| U8 Primitive; /*0x03 */ |
| } MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, |
| *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, |
| Mpi2EventDataSasNotifyPrimitive_t, |
| *pMpi2EventDataSasNotifyPrimitive_t; |
| |
| /*defines for the Primitive field */ |
| #define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) |
| #define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) |
| #define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) |
| #define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) |
| |
| /*SAS Initiator Device Status Change Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { |
| U8 ReasonCode; /*0x00 */ |
| U8 PhysicalPort; /*0x01 */ |
| U16 DevHandle; /*0x02 */ |
| U64 SASAddress; /*0x04 */ |
| } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, |
| *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, |
| Mpi2EventDataSasInitDevStatusChange_t, |
| *pMpi2EventDataSasInitDevStatusChange_t; |
| |
| /*SAS Initiator Device Status Change event ReasonCode values */ |
| #define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) |
| #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) |
| |
| /*SAS Initiator Device Table Overflow Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { |
| U16 MaxInit; /*0x00 */ |
| U16 CurrentInit; /*0x02 */ |
| U64 SASAddress; /*0x04 */ |
| } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, |
| *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, |
| Mpi2EventDataSasInitTableOverflow_t, |
| *pMpi2EventDataSasInitTableOverflow_t; |
| |
| /*SAS Topology Change List Event data */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check NumEntries at runtime. |
| */ |
| #ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT |
| #define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) |
| #endif |
| |
| typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { |
| U16 AttachedDevHandle; /*0x00 */ |
| U8 LinkRate; /*0x02 */ |
| U8 PhyStatus; /*0x03 */ |
| } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, |
| Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t; |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { |
| U16 EnclosureHandle; /*0x00 */ |
| U16 ExpanderDevHandle; /*0x02 */ |
| U8 NumPhys; /*0x04 */ |
| U8 Reserved1; /*0x05 */ |
| U16 Reserved2; /*0x06 */ |
| U8 NumEntries; /*0x08 */ |
| U8 StartPhyNum; /*0x09 */ |
| U8 ExpStatus; /*0x0A */ |
| U8 PhysicalPort; /*0x0B */ |
| MPI2_EVENT_SAS_TOPO_PHY_ENTRY |
| PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */ |
| } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, |
| *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, |
| Mpi2EventDataSasTopologyChangeList_t, |
| *pMpi2EventDataSasTopologyChangeList_t; |
| |
| /*values for the ExpStatus field */ |
| #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) |
| #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) |
| #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) |
| #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) |
| #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) |
| |
| /*defines for the LinkRate field */ |
| #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) |
| #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) |
| #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) |
| #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) |
| |
| #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) |
| #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) |
| #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) |
| #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) |
| #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) |
| #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) |
| #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) |
| #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) |
| #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) |
| #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) |
| #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) |
| |
| /*values for the PhyStatus field */ |
| #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) |
| #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) |
| /*values for the PhyStatus ReasonCode sub-field */ |
| #define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) |
| #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) |
| #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) |
| #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) |
| #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) |
| #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) |
| |
| /*SAS Enclosure Device Status Change Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { |
| U16 EnclosureHandle; /*0x00 */ |
| U8 ReasonCode; /*0x02 */ |
| U8 PhysicalPort; /*0x03 */ |
| U64 EnclosureLogicalID; /*0x04 */ |
| U16 NumSlots; /*0x0C */ |
| U16 StartSlot; /*0x0E */ |
| U32 PhyBits; /*0x10 */ |
| } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, |
| *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, |
| Mpi2EventDataSasEnclDevStatusChange_t, |
| *pMpi2EventDataSasEnclDevStatusChange_t; |
| |
| /*SAS Enclosure Device Status Change event ReasonCode values */ |
| #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) |
| #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) |
| |
| /*SAS PHY Counter Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { |
| U64 TimeStamp; /*0x00 */ |
| U32 Reserved1; /*0x08 */ |
| U8 PhyEventCode; /*0x0C */ |
| U8 PhyNum; /*0x0D */ |
| U16 Reserved2; /*0x0E */ |
| U32 PhyEventInfo; /*0x10 */ |
| U8 CounterType; /*0x14 */ |
| U8 ThresholdWindow; /*0x15 */ |
| U8 TimeUnits; /*0x16 */ |
| U8 Reserved3; /*0x17 */ |
| U32 EventThreshold; /*0x18 */ |
| U16 ThresholdFlags; /*0x1C */ |
| U16 Reserved4; /*0x1E */ |
| } MPI2_EVENT_DATA_SAS_PHY_COUNTER, |
| *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, |
| Mpi2EventDataSasPhyCounter_t, |
| *pMpi2EventDataSasPhyCounter_t; |
| |
| /*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h |
| *for the PhyEventCode field */ |
| |
| /*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h |
| *for the CounterType field */ |
| |
| /*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h |
| *for the TimeUnits field */ |
| |
| /*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h |
| *for the ThresholdFlags field */ |
| |
| /*SAS Quiesce Event data */ |
| |
| typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { |
| U8 ReasonCode; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U32 Reserved3; /*0x04 */ |
| } MPI2_EVENT_DATA_SAS_QUIESCE, |
| *PTR_MPI2_EVENT_DATA_SAS_QUIESCE, |
| Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t; |
| |
| /*SAS Quiesce Event data ReasonCode values */ |
| #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) |
| #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) |
| |
| /*Host Based Discovery Phy Event data */ |
| |
| typedef struct _MPI2_EVENT_HBD_PHY_SAS { |
| U8 Flags; /*0x00 */ |
| U8 NegotiatedLinkRate; /*0x01 */ |
| U8 PhyNum; /*0x02 */ |
| U8 PhysicalPort; /*0x03 */ |
| U32 Reserved1; /*0x04 */ |
| U8 InitialFrame[28]; /*0x08 */ |
| } MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS, |
| Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t; |
| |
| /*values for the Flags field */ |
| #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) |
| #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) |
| |
| /*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h |
| *for the NegotiatedLinkRate field */ |
| |
| typedef union _MPI2_EVENT_HBD_DESCRIPTOR { |
| MPI2_EVENT_HBD_PHY_SAS Sas; |
| } MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR, |
| Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t; |
| |
| typedef struct _MPI2_EVENT_DATA_HBD_PHY { |
| U8 DescriptorType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U32 Reserved3; /*0x04 */ |
| MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */ |
| } MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY, |
| Mpi2EventDataHbdPhy_t, |
| *pMpi2EventDataMpi2EventDataHbdPhy_t; |
| |
| /*values for the DescriptorType field */ |
| #define MPI2_EVENT_HBD_DT_SAS (0x01) |
| |
| /**************************************************************************** |
| * EventAck message |
| ****************************************************************************/ |
| |
| /*EventAck Request message */ |
| typedef struct _MPI2_EVENT_ACK_REQUEST { |
| U16 Reserved1; /*0x00 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Event; /*0x0C */ |
| U16 Reserved5; /*0x0E */ |
| U32 EventContext; /*0x10 */ |
| } MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST, |
| Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t; |
| |
| /*EventAck Reply message */ |
| typedef struct _MPI2_EVENT_ACK_REPLY { |
| U16 Reserved1; /*0x00 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Reserved5; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| } MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY, |
| Mpi2EventAckReply_t, *pMpi2EventAckReply_t; |
| |
| /**************************************************************************** |
| * SendHostMessage message |
| ****************************************************************************/ |
| |
| /*SendHostMessage Request message */ |
| typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { |
| U16 HostDataLength; /*0x00 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved1; /*0x04 */ |
| U8 Reserved2; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved3; /*0x0A */ |
| U8 Reserved4; /*0x0C */ |
| U8 DestVF_ID; /*0x0D */ |
| U16 Reserved5; /*0x0E */ |
| U32 Reserved6; /*0x10 */ |
| U32 Reserved7; /*0x14 */ |
| U32 Reserved8; /*0x18 */ |
| U32 Reserved9; /*0x1C */ |
| U32 Reserved10; /*0x20 */ |
| U32 HostData[1]; /*0x24 */ |
| } MPI2_SEND_HOST_MESSAGE_REQUEST, |
| *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, |
| Mpi2SendHostMessageRequest_t, |
| *pMpi2SendHostMessageRequest_t; |
| |
| /*SendHostMessage Reply message */ |
| typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { |
| U16 HostDataLength; /*0x00 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved1; /*0x04 */ |
| U8 Reserved2; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved3; /*0x0A */ |
| U16 Reserved4; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| } MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY, |
| Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t; |
| |
| /**************************************************************************** |
| * FWDownload message |
| ****************************************************************************/ |
| |
| /*MPI v2.0 FWDownload Request message */ |
| typedef struct _MPI2_FW_DOWNLOAD_REQUEST { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U32 TotalImageSize; /*0x0C */ |
| U32 Reserved5; /*0x10 */ |
| MPI2_MPI_SGE_UNION SGL; /*0x14 */ |
| } MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST, |
| Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest; |
| |
| #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) |
| |
| #define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) |
| #define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) |
| #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) |
| #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) |
| #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) |
| #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) |
| #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) |
| #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) |
| #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) |
| |
| /*MPI v2.0 FWDownload TransactionContext Element */ |
| typedef struct _MPI2_FW_DOWNLOAD_TCSGE { |
| U8 Reserved1; /*0x00 */ |
| U8 ContextSize; /*0x01 */ |
| U8 DetailsLength; /*0x02 */ |
| U8 Flags; /*0x03 */ |
| U32 Reserved2; /*0x04 */ |
| U32 ImageOffset; /*0x08 */ |
| U32 ImageSize; /*0x0C */ |
| } MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE, |
| Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t; |
| |
| /*MPI v2.5 FWDownload Request message */ |
| typedef struct _MPI25_FW_DOWNLOAD_REQUEST { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U32 TotalImageSize; /*0x0C */ |
| U32 Reserved5; /*0x10 */ |
| U32 Reserved6; /*0x14 */ |
| U32 ImageOffset; /*0x18 */ |
| U32 ImageSize; /*0x1C */ |
| MPI25_SGE_IO_UNION SGL; /*0x20 */ |
| } MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST, |
| Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest; |
| |
| /*FWDownload Reply message */ |
| typedef struct _MPI2_FW_DOWNLOAD_REPLY { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Reserved5; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| } MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY, |
| Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t; |
| |
| /**************************************************************************** |
| * FWUpload message |
| ****************************************************************************/ |
| |
| /*MPI v2.0 FWUpload Request message */ |
| typedef struct _MPI2_FW_UPLOAD_REQUEST { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U32 Reserved5; /*0x0C */ |
| U32 Reserved6; /*0x10 */ |
| MPI2_MPI_SGE_UNION SGL; /*0x14 */ |
| } MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST, |
| Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t; |
| |
| #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) |
| #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) |
| #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) |
| #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) |
| #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) |
| #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) |
| #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) |
| #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) |
| #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) |
| #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) |
| |
| /*MPI v2.0 FWUpload TransactionContext Element */ |
| typedef struct _MPI2_FW_UPLOAD_TCSGE { |
| U8 Reserved1; /*0x00 */ |
| U8 ContextSize; /*0x01 */ |
| U8 DetailsLength; /*0x02 */ |
| U8 Flags; /*0x03 */ |
| U32 Reserved2; /*0x04 */ |
| U32 ImageOffset; /*0x08 */ |
| U32 ImageSize; /*0x0C */ |
| } MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE, |
| Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t; |
| |
| /*MPI v2.5 FWUpload Request message */ |
| typedef struct _MPI25_FW_UPLOAD_REQUEST { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U32 Reserved5; /*0x0C */ |
| U32 Reserved6; /*0x10 */ |
| U32 Reserved7; /*0x14 */ |
| U32 ImageOffset; /*0x18 */ |
| U32 ImageSize; /*0x1C */ |
| MPI25_SGE_IO_UNION SGL; /*0x20 */ |
| } MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST, |
| Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t; |
| |
| /*FWUpload Reply message */ |
| typedef struct _MPI2_FW_UPLOAD_REPLY { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Reserved5; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| U32 ActualImageSize; /*0x14 */ |
| } MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, |
| Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; |
| |
| /*FW Image Header */ |
| typedef struct _MPI2_FW_IMAGE_HEADER { |
| U32 Signature; /*0x00 */ |
| U32 Signature0; /*0x04 */ |
| U32 Signature1; /*0x08 */ |
| U32 Signature2; /*0x0C */ |
| MPI2_VERSION_UNION MPIVersion; /*0x10 */ |
| MPI2_VERSION_UNION FWVersion; /*0x14 */ |
| MPI2_VERSION_UNION NVDATAVersion; /*0x18 */ |
| MPI2_VERSION_UNION PackageVersion; /*0x1C */ |
| U16 VendorID; /*0x20 */ |
| U16 ProductID; /*0x22 */ |
| U16 ProtocolFlags; /*0x24 */ |
| U16 Reserved26; /*0x26 */ |
| U32 IOCCapabilities; /*0x28 */ |
| U32 ImageSize; /*0x2C */ |
| U32 NextImageHeaderOffset; /*0x30 */ |
| U32 Checksum; /*0x34 */ |
| U32 Reserved38; /*0x38 */ |
| U32 Reserved3C; /*0x3C */ |
| U32 Reserved40; /*0x40 */ |
| U32 Reserved44; /*0x44 */ |
| U32 Reserved48; /*0x48 */ |
| U32 Reserved4C; /*0x4C */ |
| U32 Reserved50; /*0x50 */ |
| U32 Reserved54; /*0x54 */ |
| U32 Reserved58; /*0x58 */ |
| U32 Reserved5C; /*0x5C */ |
| U32 Reserved60; /*0x60 */ |
| U32 FirmwareVersionNameWhat; /*0x64 */ |
| U8 FirmwareVersionName[32]; /*0x68 */ |
| U32 VendorNameWhat; /*0x88 */ |
| U8 VendorName[32]; /*0x8C */ |
| U32 PackageNameWhat; /*0x88 */ |
| U8 PackageName[32]; /*0x8C */ |
| U32 ReservedD0; /*0xD0 */ |
| U32 ReservedD4; /*0xD4 */ |
| U32 ReservedD8; /*0xD8 */ |
| U32 ReservedDC; /*0xDC */ |
| U32 ReservedE0; /*0xE0 */ |
| U32 ReservedE4; /*0xE4 */ |
| U32 ReservedE8; /*0xE8 */ |
| U32 ReservedEC; /*0xEC */ |
| U32 ReservedF0; /*0xF0 */ |
| U32 ReservedF4; /*0xF4 */ |
| U32 ReservedF8; /*0xF8 */ |
| U32 ReservedFC; /*0xFC */ |
| } MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER, |
| Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t; |
| |
| /*Signature field */ |
| #define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) |
| #define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) |
| #define MPI2_FW_HEADER_SIGNATURE (0xEA000000) |
| |
| /*Signature0 field */ |
| #define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) |
| #define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) |
| |
| /*Signature1 field */ |
| #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) |
| #define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) |
| |
| /*Signature2 field */ |
| #define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) |
| #define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) |
| |
| /*defines for using the ProductID field */ |
| #define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) |
| #define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) |
| |
| #define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) |
| #define MPI2_FW_HEADER_PID_PROD_A (0x0000) |
| #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) |
| #define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) |
| |
| #define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) |
| /*SAS ProductID Family bits */ |
| #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) |
| #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) |
| #define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) |
| |
| /*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ |
| |
| /*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ |
| |
| #define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) |
| #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) |
| #define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) |
| |
| #define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) |
| |
| #define MPI2_FW_HEADER_SIZE (0x100) |
| |
| /*Extended Image Header */ |
| typedef struct _MPI2_EXT_IMAGE_HEADER { |
| U8 ImageType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U32 Checksum; /*0x04 */ |
| U32 ImageSize; /*0x08 */ |
| U32 NextImageHeaderOffset; /*0x0C */ |
| U32 PackageVersion; /*0x10 */ |
| U32 Reserved3; /*0x14 */ |
| U32 Reserved4; /*0x18 */ |
| U32 Reserved5; /*0x1C */ |
| U8 IdentifyString[32]; /*0x20 */ |
| } MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER, |
| Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t; |
| |
| /*useful offsets */ |
| #define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) |
| #define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) |
| #define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) |
| |
| #define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) |
| |
| /*defines for the ImageType field */ |
| #define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) |
| #define MPI2_EXT_IMAGE_TYPE_FW (0x01) |
| #define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) |
| #define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) |
| #define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) |
| #define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) |
| #define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) |
| #define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) |
| #define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80) |
| #define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF) |
| |
| #define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) |
| |
| /*FLASH Layout Extended Image Data */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check RegionsPerLayout at runtime. |
| */ |
| #ifndef MPI2_FLASH_NUMBER_OF_REGIONS |
| #define MPI2_FLASH_NUMBER_OF_REGIONS (1) |
| #endif |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check NumberOfLayouts at runtime. |
| */ |
| #ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS |
| #define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) |
| #endif |
| |
| typedef struct _MPI2_FLASH_REGION { |
| U8 RegionType; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U16 Reserved2; /*0x02 */ |
| U32 RegionOffset; /*0x04 */ |
| U32 RegionSize; /*0x08 */ |
| U32 Reserved3; /*0x0C */ |
| } MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION, |
| Mpi2FlashRegion_t, *pMpi2FlashRegion_t; |
| |
| typedef struct _MPI2_FLASH_LAYOUT { |
| U32 FlashSize; /*0x00 */ |
| U32 Reserved1; /*0x04 */ |
| U32 Reserved2; /*0x08 */ |
| U32 Reserved3; /*0x0C */ |
| MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ |
| } MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, |
| Mpi2FlashLayout_t, *pMpi2FlashLayout_t; |
| |
| typedef struct _MPI2_FLASH_LAYOUT_DATA { |
| U8 ImageRevision; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 SizeOfRegion; /*0x02 */ |
| U8 Reserved2; /*0x03 */ |
| U16 NumberOfLayouts; /*0x04 */ |
| U16 RegionsPerLayout; /*0x06 */ |
| U16 MinimumSectorAlignment; /*0x08 */ |
| U16 Reserved3; /*0x0A */ |
| U32 Reserved4; /*0x0C */ |
| MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ |
| } MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, |
| Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; |
| |
| /*defines for the RegionType field */ |
| #define MPI2_FLASH_REGION_UNUSED (0x00) |
| #define MPI2_FLASH_REGION_FIRMWARE (0x01) |
| #define MPI2_FLASH_REGION_BIOS (0x02) |
| #define MPI2_FLASH_REGION_NVDATA (0x03) |
| #define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) |
| #define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) |
| #define MPI2_FLASH_REGION_CONFIG_1 (0x07) |
| #define MPI2_FLASH_REGION_CONFIG_2 (0x08) |
| #define MPI2_FLASH_REGION_MEGARAID (0x09) |
| #define MPI2_FLASH_REGION_INIT (0x0A) |
| |
| /*ImageRevision */ |
| #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) |
| |
| /*Supported Devices Extended Image Data */ |
| |
| /* |
| *Host code (drivers, BIOS, utilities, etc.) should leave this define set to |
| *one and check NumberOfDevices at runtime. |
| */ |
| #ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES |
| #define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) |
| #endif |
| |
| typedef struct _MPI2_SUPPORTED_DEVICE { |
| U16 DeviceID; /*0x00 */ |
| U16 VendorID; /*0x02 */ |
| U16 DeviceIDMask; /*0x04 */ |
| U16 Reserved1; /*0x06 */ |
| U8 LowPCIRev; /*0x08 */ |
| U8 HighPCIRev; /*0x09 */ |
| U16 Reserved2; /*0x0A */ |
| U32 Reserved3; /*0x0C */ |
| } MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE, |
| Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t; |
| |
| typedef struct _MPI2_SUPPORTED_DEVICES_DATA { |
| U8 ImageRevision; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 NumberOfDevices; /*0x02 */ |
| U8 Reserved2; /*0x03 */ |
| U32 Reserved3; /*0x04 */ |
| MPI2_SUPPORTED_DEVICE |
| SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ |
| } MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, |
| Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; |
| |
| /*ImageRevision */ |
| #define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) |
| |
| /*Init Extended Image Data */ |
| |
| typedef struct _MPI2_INIT_IMAGE_FOOTER { |
| U32 BootFlags; /*0x00 */ |
| U32 ImageSize; /*0x04 */ |
| U32 Signature0; /*0x08 */ |
| U32 Signature1; /*0x0C */ |
| U32 Signature2; /*0x10 */ |
| U32 ResetVector; /*0x14 */ |
| } MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER, |
| Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t; |
| |
| /*defines for the BootFlags field */ |
| #define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) |
| |
| /*defines for the ImageSize field */ |
| #define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) |
| |
| /*defines for the Signature0 field */ |
| #define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) |
| #define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) |
| |
| /*defines for the Signature1 field */ |
| #define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) |
| #define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) |
| |
| /*defines for the Signature2 field */ |
| #define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) |
| #define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) |
| |
| /*Signature fields as individual bytes */ |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) |
| |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) |
| |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) |
| #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) |
| |
| /*defines for the ResetVector field */ |
| #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) |
| |
| /**************************************************************************** |
| * PowerManagementControl message |
| ****************************************************************************/ |
| |
| /*PowerManagementControl Request message */ |
| typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { |
| U8 Feature; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 ChainOffset; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U8 Parameter1; /*0x0C */ |
| U8 Parameter2; /*0x0D */ |
| U8 Parameter3; /*0x0E */ |
| U8 Parameter4; /*0x0F */ |
| U32 Reserved5; /*0x10 */ |
| U32 Reserved6; /*0x14 */ |
| } MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, |
| Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t; |
| |
| /*defines for the Feature field */ |
| #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) |
| #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) |
| #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */ |
| #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) |
| #define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) |
| #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) |
| #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) |
| |
| /*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ |
| /*Parameter1 contains a PHY number */ |
| /*Parameter2 indicates power condition action using these defines */ |
| #define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) |
| #define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) |
| #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) |
| /*Parameter3 and Parameter4 are reserved */ |
| |
| /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION |
| * Feature */ |
| /*Parameter1 contains SAS port width modulation group number */ |
| /*Parameter2 indicates IOC action using these defines */ |
| #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) |
| #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) |
| #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) |
| /*Parameter3 indicates desired modulation level using these defines */ |
| #define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) |
| #define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) |
| #define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) |
| #define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) |
| /*Parameter4 is reserved */ |
| |
| /*this next set (_PCIE_LINK) is obsolete */ |
| /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ |
| /*Parameter1 indicates desired PCIe link speed using these defines */ |
| #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */ |
| #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */ |
| #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */ |
| /*Parameter2 indicates desired PCIe link width using these defines */ |
| #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */ |
| #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */ |
| #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */ |
| #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */ |
| /*Parameter3 and Parameter4 are reserved */ |
| |
| /*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ |
| /*Parameter1 indicates desired IOC hardware clock speed using these defines */ |
| #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) |
| #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) |
| #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) |
| #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) |
| /*Parameter2, Parameter3, and Parameter4 are reserved */ |
| |
| /*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/ |
| /*Parameter1 indicates host action regarding global power management mode */ |
| #define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) |
| #define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) |
| #define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) |
| /*Parameter2 indicates the requested global power management mode */ |
| #define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) |
| #define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) |
| #define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) |
| /*Parameter3 and Parameter4 are reserved */ |
| |
| /*PowerManagementControl Reply message */ |
| typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { |
| U8 Feature; /*0x00 */ |
| U8 Reserved1; /*0x01 */ |
| U8 MsgLength; /*0x02 */ |
| U8 Function; /*0x03 */ |
| U16 Reserved2; /*0x04 */ |
| U8 Reserved3; /*0x06 */ |
| U8 MsgFlags; /*0x07 */ |
| U8 VP_ID; /*0x08 */ |
| U8 VF_ID; /*0x09 */ |
| U16 Reserved4; /*0x0A */ |
| U16 Reserved5; /*0x0C */ |
| U16 IOCStatus; /*0x0E */ |
| U32 IOCLogInfo; /*0x10 */ |
| } MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, |
| Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; |
| |
| #endif |
