|  | /* | 
|  | $Id: fore200e.c,v 1.5 2000/04/14 10:10:34 davem Exp $ | 
|  |  | 
|  | A FORE Systems 200E-series driver for ATM on Linux. | 
|  | Christophe Lizzi (lizzi@cnam.fr), October 1999-March 2003. | 
|  |  | 
|  | Based on the PCA-200E driver from Uwe Dannowski (Uwe.Dannowski@inf.tu-dresden.de). | 
|  |  | 
|  | This driver simultaneously supports PCA-200E and SBA-200E adapters | 
|  | on i386, alpha (untested), powerpc, sparc and sparc64 architectures. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  |  | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/atmdev.h> | 
|  | #include <linux/sonet.h> | 
|  | #include <linux/atm_suni.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/string.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/dma.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/atomic.h> | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_SBA | 
|  | #include <asm/idprom.h> | 
|  | #include <asm/sbus.h> | 
|  | #include <asm/openprom.h> | 
|  | #include <asm/oplib.h> | 
|  | #include <asm/pgtable.h> | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_ATM_FORE200E_USE_TASKLET) /* defer interrupt work to a tasklet */ | 
|  | #define FORE200E_USE_TASKLET | 
|  | #endif | 
|  |  | 
|  | #if 0 /* enable the debugging code of the buffer supply queues */ | 
|  | #define FORE200E_BSQ_DEBUG | 
|  | #endif | 
|  |  | 
|  | #if 1 /* ensure correct handling of 52-byte AAL0 SDUs expected by atmdump-like apps */ | 
|  | #define FORE200E_52BYTE_AAL0_SDU | 
|  | #endif | 
|  |  | 
|  | #include "fore200e.h" | 
|  | #include "suni.h" | 
|  |  | 
|  | #define FORE200E_VERSION "0.3e" | 
|  |  | 
|  | #define FORE200E         "fore200e: " | 
|  |  | 
|  | #if 0 /* override .config */ | 
|  | #define CONFIG_ATM_FORE200E_DEBUG 1 | 
|  | #endif | 
|  | #if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0) | 
|  | #define DPRINTK(level, format, args...)  do { if (CONFIG_ATM_FORE200E_DEBUG >= (level)) \ | 
|  | printk(FORE200E format, ##args); } while (0) | 
|  | #else | 
|  | #define DPRINTK(level, format, args...)  do {} while (0) | 
|  | #endif | 
|  |  | 
|  |  | 
|  | #define FORE200E_ALIGN(addr, alignment) \ | 
|  | ((((unsigned long)(addr) + (alignment - 1)) & ~(alignment - 1)) - (unsigned long)(addr)) | 
|  |  | 
|  | #define FORE200E_DMA_INDEX(dma_addr, type, index)  ((dma_addr) + (index) * sizeof(type)) | 
|  |  | 
|  | #define FORE200E_INDEX(virt_addr, type, index)     (&((type *)(virt_addr))[ index ]) | 
|  |  | 
|  | #define FORE200E_NEXT_ENTRY(index, modulo)         (index = ++(index) % (modulo)) | 
|  |  | 
|  | #if 1 | 
|  | #define ASSERT(expr)     if (!(expr)) { \ | 
|  | printk(FORE200E "assertion failed! %s[%d]: %s\n", \ | 
|  | __FUNCTION__, __LINE__, #expr); \ | 
|  | panic(FORE200E "%s", __FUNCTION__); \ | 
|  | } | 
|  | #else | 
|  | #define ASSERT(expr)     do {} while (0) | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static const struct atmdev_ops   fore200e_ops; | 
|  | static const struct fore200e_bus fore200e_bus[]; | 
|  |  | 
|  | static LIST_HEAD(fore200e_boards); | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR("Christophe Lizzi - credits to Uwe Dannowski and Heikki Vatiainen"); | 
|  | MODULE_DESCRIPTION("FORE Systems 200E-series ATM driver - version " FORE200E_VERSION); | 
|  | MODULE_SUPPORTED_DEVICE("PCA-200E, SBA-200E"); | 
|  |  | 
|  |  | 
|  | static const int fore200e_rx_buf_nbr[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = { | 
|  | { BUFFER_S1_NBR, BUFFER_L1_NBR }, | 
|  | { BUFFER_S2_NBR, BUFFER_L2_NBR } | 
|  | }; | 
|  |  | 
|  | static const int fore200e_rx_buf_size[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = { | 
|  | { BUFFER_S1_SIZE, BUFFER_L1_SIZE }, | 
|  | { BUFFER_S2_SIZE, BUFFER_L2_SIZE } | 
|  | }; | 
|  |  | 
|  |  | 
|  | #if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG > 0) | 
|  | static const char* fore200e_traffic_class[] = { "NONE", "UBR", "CBR", "VBR", "ABR", "ANY" }; | 
|  | #endif | 
|  |  | 
|  |  | 
|  | #if 0 /* currently unused */ | 
|  | static int | 
|  | fore200e_fore2atm_aal(enum fore200e_aal aal) | 
|  | { | 
|  | switch(aal) { | 
|  | case FORE200E_AAL0:  return ATM_AAL0; | 
|  | case FORE200E_AAL34: return ATM_AAL34; | 
|  | case FORE200E_AAL5:  return ATM_AAL5; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static enum fore200e_aal | 
|  | fore200e_atm2fore_aal(int aal) | 
|  | { | 
|  | switch(aal) { | 
|  | case ATM_AAL0:  return FORE200E_AAL0; | 
|  | case ATM_AAL34: return FORE200E_AAL34; | 
|  | case ATM_AAL1: | 
|  | case ATM_AAL2: | 
|  | case ATM_AAL5:  return FORE200E_AAL5; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static char* | 
|  | fore200e_irq_itoa(int irq) | 
|  | { | 
|  | #if defined(__sparc_v9__) | 
|  | return __irq_itoa(irq); | 
|  | #else | 
|  | static char str[8]; | 
|  | sprintf(str, "%d", irq); | 
|  | return str; | 
|  | #endif | 
|  | } | 
|  |  | 
|  |  | 
|  | static void* | 
|  | fore200e_kmalloc(int size, gfp_t flags) | 
|  | { | 
|  | void *chunk = kzalloc(size, flags); | 
|  |  | 
|  | if (!chunk) | 
|  | printk(FORE200E "kmalloc() failed, requested size = %d, flags = 0x%x\n",			size, flags); | 
|  |  | 
|  | return chunk; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_kfree(void* chunk) | 
|  | { | 
|  | kfree(chunk); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* allocate and align a chunk of memory intended to hold the data behing exchanged | 
|  | between the driver and the adapter (using streaming DVMA) */ | 
|  |  | 
|  | static int | 
|  | fore200e_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, int size, int alignment, int direction) | 
|  | { | 
|  | unsigned long offset = 0; | 
|  |  | 
|  | if (alignment <= sizeof(int)) | 
|  | alignment = 0; | 
|  |  | 
|  | chunk->alloc_size = size + alignment; | 
|  | chunk->align_size = size; | 
|  | chunk->direction  = direction; | 
|  |  | 
|  | chunk->alloc_addr = fore200e_kmalloc(chunk->alloc_size, GFP_KERNEL | GFP_DMA); | 
|  | if (chunk->alloc_addr == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (alignment > 0) | 
|  | offset = FORE200E_ALIGN(chunk->alloc_addr, alignment); | 
|  |  | 
|  | chunk->align_addr = chunk->alloc_addr + offset; | 
|  |  | 
|  | chunk->dma_addr = fore200e->bus->dma_map(fore200e, chunk->align_addr, chunk->align_size, direction); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* free a chunk of memory */ | 
|  |  | 
|  | static void | 
|  | fore200e_chunk_free(struct fore200e* fore200e, struct chunk* chunk) | 
|  | { | 
|  | fore200e->bus->dma_unmap(fore200e, chunk->dma_addr, chunk->dma_size, chunk->direction); | 
|  |  | 
|  | fore200e_kfree(chunk->alloc_addr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_spin(int msecs) | 
|  | { | 
|  | unsigned long timeout = jiffies + msecs_to_jiffies(msecs); | 
|  | while (time_before(jiffies, timeout)); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_poll(struct fore200e* fore200e, volatile u32* addr, u32 val, int msecs) | 
|  | { | 
|  | unsigned long timeout = jiffies + msecs_to_jiffies(msecs); | 
|  | int           ok; | 
|  |  | 
|  | mb(); | 
|  | do { | 
|  | if ((ok = (*addr == val)) || (*addr & STATUS_ERROR)) | 
|  | break; | 
|  |  | 
|  | } while (time_before(jiffies, timeout)); | 
|  |  | 
|  | #if 1 | 
|  | if (!ok) { | 
|  | printk(FORE200E "cmd polling failed, got status 0x%08x, expected 0x%08x\n", | 
|  | *addr, val); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ok; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_io_poll(struct fore200e* fore200e, volatile u32 __iomem *addr, u32 val, int msecs) | 
|  | { | 
|  | unsigned long timeout = jiffies + msecs_to_jiffies(msecs); | 
|  | int           ok; | 
|  |  | 
|  | do { | 
|  | if ((ok = (fore200e->bus->read(addr) == val))) | 
|  | break; | 
|  |  | 
|  | } while (time_before(jiffies, timeout)); | 
|  |  | 
|  | #if 1 | 
|  | if (!ok) { | 
|  | printk(FORE200E "I/O polling failed, got status 0x%08x, expected 0x%08x\n", | 
|  | fore200e->bus->read(addr), val); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ok; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_free_rx_buf(struct fore200e* fore200e) | 
|  | { | 
|  | int scheme, magn, nbr; | 
|  | struct buffer* buffer; | 
|  |  | 
|  | for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
|  | for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
|  |  | 
|  | if ((buffer = fore200e->host_bsq[ scheme ][ magn ].buffer) != NULL) { | 
|  |  | 
|  | for (nbr = 0; nbr < fore200e_rx_buf_nbr[ scheme ][ magn ]; nbr++) { | 
|  |  | 
|  | struct chunk* data = &buffer[ nbr ].data; | 
|  |  | 
|  | if (data->alloc_addr != NULL) | 
|  | fore200e_chunk_free(fore200e, data); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_uninit_bs_queue(struct fore200e* fore200e) | 
|  | { | 
|  | int scheme, magn; | 
|  |  | 
|  | for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
|  | for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
|  |  | 
|  | struct chunk* status    = &fore200e->host_bsq[ scheme ][ magn ].status; | 
|  | struct chunk* rbd_block = &fore200e->host_bsq[ scheme ][ magn ].rbd_block; | 
|  |  | 
|  | if (status->alloc_addr) | 
|  | fore200e->bus->dma_chunk_free(fore200e, status); | 
|  |  | 
|  | if (rbd_block->alloc_addr) | 
|  | fore200e->bus->dma_chunk_free(fore200e, rbd_block); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_reset(struct fore200e* fore200e, int diag) | 
|  | { | 
|  | int ok; | 
|  |  | 
|  | fore200e->cp_monitor = fore200e->virt_base + FORE200E_CP_MONITOR_OFFSET; | 
|  |  | 
|  | fore200e->bus->write(BSTAT_COLD_START, &fore200e->cp_monitor->bstat); | 
|  |  | 
|  | fore200e->bus->reset(fore200e); | 
|  |  | 
|  | if (diag) { | 
|  | ok = fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_SELFTEST_OK, 1000); | 
|  | if (ok == 0) { | 
|  |  | 
|  | printk(FORE200E "device %s self-test failed\n", fore200e->name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | printk(FORE200E "device %s self-test passed\n", fore200e->name); | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_RESET; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_shutdown(struct fore200e* fore200e) | 
|  | { | 
|  | printk(FORE200E "removing device %s at 0x%lx, IRQ %s\n", | 
|  | fore200e->name, fore200e->phys_base, | 
|  | fore200e_irq_itoa(fore200e->irq)); | 
|  |  | 
|  | if (fore200e->state > FORE200E_STATE_RESET) { | 
|  | /* first, reset the board to prevent further interrupts or data transfers */ | 
|  | fore200e_reset(fore200e, 0); | 
|  | } | 
|  |  | 
|  | /* then, release all allocated resources */ | 
|  | switch(fore200e->state) { | 
|  |  | 
|  | case FORE200E_STATE_COMPLETE: | 
|  | kfree(fore200e->stats); | 
|  |  | 
|  | case FORE200E_STATE_IRQ: | 
|  | free_irq(fore200e->irq, fore200e->atm_dev); | 
|  |  | 
|  | case FORE200E_STATE_ALLOC_BUF: | 
|  | fore200e_free_rx_buf(fore200e); | 
|  |  | 
|  | case FORE200E_STATE_INIT_BSQ: | 
|  | fore200e_uninit_bs_queue(fore200e); | 
|  |  | 
|  | case FORE200E_STATE_INIT_RXQ: | 
|  | fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_rxq.status); | 
|  | fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_rxq.rpd); | 
|  |  | 
|  | case FORE200E_STATE_INIT_TXQ: | 
|  | fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_txq.status); | 
|  | fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_txq.tpd); | 
|  |  | 
|  | case FORE200E_STATE_INIT_CMDQ: | 
|  | fore200e->bus->dma_chunk_free(fore200e, &fore200e->host_cmdq.status); | 
|  |  | 
|  | case FORE200E_STATE_INITIALIZE: | 
|  | /* nothing to do for that state */ | 
|  |  | 
|  | case FORE200E_STATE_START_FW: | 
|  | /* nothing to do for that state */ | 
|  |  | 
|  | case FORE200E_STATE_LOAD_FW: | 
|  | /* nothing to do for that state */ | 
|  |  | 
|  | case FORE200E_STATE_RESET: | 
|  | /* nothing to do for that state */ | 
|  |  | 
|  | case FORE200E_STATE_MAP: | 
|  | fore200e->bus->unmap(fore200e); | 
|  |  | 
|  | case FORE200E_STATE_CONFIGURE: | 
|  | /* nothing to do for that state */ | 
|  |  | 
|  | case FORE200E_STATE_REGISTER: | 
|  | /* XXX shouldn't we *start* by deregistering the device? */ | 
|  | atm_dev_deregister(fore200e->atm_dev); | 
|  |  | 
|  | case FORE200E_STATE_BLANK: | 
|  | /* nothing to do for that state */ | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_PCA | 
|  |  | 
|  | static u32 fore200e_pca_read(volatile u32 __iomem *addr) | 
|  | { | 
|  | /* on big-endian hosts, the board is configured to convert | 
|  | the endianess of slave RAM accesses  */ | 
|  | return le32_to_cpu(readl(addr)); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void fore200e_pca_write(u32 val, volatile u32 __iomem *addr) | 
|  | { | 
|  | /* on big-endian hosts, the board is configured to convert | 
|  | the endianess of slave RAM accesses  */ | 
|  | writel(cpu_to_le32(val), addr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static u32 | 
|  | fore200e_pca_dma_map(struct fore200e* fore200e, void* virt_addr, int size, int direction) | 
|  | { | 
|  | u32 dma_addr = pci_map_single((struct pci_dev*)fore200e->bus_dev, virt_addr, size, direction); | 
|  |  | 
|  | DPRINTK(3, "PCI DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d,  --> dma_addr = 0x%08x\n", | 
|  | virt_addr, size, direction, dma_addr); | 
|  |  | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_pca_dma_unmap(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
|  | { | 
|  | DPRINTK(3, "PCI DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d\n", | 
|  | dma_addr, size, direction); | 
|  |  | 
|  | pci_unmap_single((struct pci_dev*)fore200e->bus_dev, dma_addr, size, direction); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_pca_dma_sync_for_cpu(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
|  | { | 
|  | DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
|  |  | 
|  | pci_dma_sync_single_for_cpu((struct pci_dev*)fore200e->bus_dev, dma_addr, size, direction); | 
|  | } | 
|  |  | 
|  | static void | 
|  | fore200e_pca_dma_sync_for_device(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
|  | { | 
|  | DPRINTK(3, "PCI DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
|  |  | 
|  | pci_dma_sync_single_for_device((struct pci_dev*)fore200e->bus_dev, dma_addr, size, direction); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* allocate a DMA consistent chunk of memory intended to act as a communication mechanism | 
|  | (to hold descriptors, status, queues, etc.) shared by the driver and the adapter */ | 
|  |  | 
|  | static int | 
|  | fore200e_pca_dma_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, | 
|  | int size, int nbr, int alignment) | 
|  | { | 
|  | /* returned chunks are page-aligned */ | 
|  | chunk->alloc_size = size * nbr; | 
|  | chunk->alloc_addr = pci_alloc_consistent((struct pci_dev*)fore200e->bus_dev, | 
|  | chunk->alloc_size, | 
|  | &chunk->dma_addr); | 
|  |  | 
|  | if ((chunk->alloc_addr == NULL) || (chunk->dma_addr == 0)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | chunk->align_addr = chunk->alloc_addr; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* free a DMA consistent chunk of memory */ | 
|  |  | 
|  | static void | 
|  | fore200e_pca_dma_chunk_free(struct fore200e* fore200e, struct chunk* chunk) | 
|  | { | 
|  | pci_free_consistent((struct pci_dev*)fore200e->bus_dev, | 
|  | chunk->alloc_size, | 
|  | chunk->alloc_addr, | 
|  | chunk->dma_addr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_pca_irq_check(struct fore200e* fore200e) | 
|  | { | 
|  | /* this is a 1 bit register */ | 
|  | int irq_posted = readl(fore200e->regs.pca.psr); | 
|  |  | 
|  | #if defined(CONFIG_ATM_FORE200E_DEBUG) && (CONFIG_ATM_FORE200E_DEBUG == 2) | 
|  | if (irq_posted && (readl(fore200e->regs.pca.hcr) & PCA200E_HCR_OUTFULL)) { | 
|  | DPRINTK(2,"FIFO OUT full, device %d\n", fore200e->atm_dev->number); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return irq_posted; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_pca_irq_ack(struct fore200e* fore200e) | 
|  | { | 
|  | writel(PCA200E_HCR_CLRINTR, fore200e->regs.pca.hcr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_pca_reset(struct fore200e* fore200e) | 
|  | { | 
|  | writel(PCA200E_HCR_RESET, fore200e->regs.pca.hcr); | 
|  | fore200e_spin(10); | 
|  | writel(0, fore200e->regs.pca.hcr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_pca_map(struct fore200e* fore200e) | 
|  | { | 
|  | DPRINTK(2, "device %s being mapped in memory\n", fore200e->name); | 
|  |  | 
|  | fore200e->virt_base = ioremap(fore200e->phys_base, PCA200E_IOSPACE_LENGTH); | 
|  |  | 
|  | if (fore200e->virt_base == NULL) { | 
|  | printk(FORE200E "can't map device %s\n", fore200e->name); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base); | 
|  |  | 
|  | /* gain access to the PCA specific registers  */ | 
|  | fore200e->regs.pca.hcr = fore200e->virt_base + PCA200E_HCR_OFFSET; | 
|  | fore200e->regs.pca.imr = fore200e->virt_base + PCA200E_IMR_OFFSET; | 
|  | fore200e->regs.pca.psr = fore200e->virt_base + PCA200E_PSR_OFFSET; | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_MAP; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_pca_unmap(struct fore200e* fore200e) | 
|  | { | 
|  | DPRINTK(2, "device %s being unmapped from memory\n", fore200e->name); | 
|  |  | 
|  | if (fore200e->virt_base != NULL) | 
|  | iounmap(fore200e->virt_base); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_pca_configure(struct fore200e* fore200e) | 
|  | { | 
|  | struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev; | 
|  | u8              master_ctrl, latency; | 
|  |  | 
|  | DPRINTK(2, "device %s being configured\n", fore200e->name); | 
|  |  | 
|  | if ((pci_dev->irq == 0) || (pci_dev->irq == 0xFF)) { | 
|  | printk(FORE200E "incorrect IRQ setting - misconfigured PCI-PCI bridge?\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | pci_read_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, &master_ctrl); | 
|  |  | 
|  | master_ctrl = master_ctrl | 
|  | #if defined(__BIG_ENDIAN) | 
|  | /* request the PCA board to convert the endianess of slave RAM accesses */ | 
|  | | PCA200E_CTRL_CONVERT_ENDIAN | 
|  | #endif | 
|  | #if 0 | 
|  | | PCA200E_CTRL_DIS_CACHE_RD | 
|  | | PCA200E_CTRL_DIS_WRT_INVAL | 
|  | | PCA200E_CTRL_ENA_CONT_REQ_MODE | 
|  | | PCA200E_CTRL_2_CACHE_WRT_INVAL | 
|  | #endif | 
|  | | PCA200E_CTRL_LARGE_PCI_BURSTS; | 
|  |  | 
|  | pci_write_config_byte(pci_dev, PCA200E_PCI_MASTER_CTRL, master_ctrl); | 
|  |  | 
|  | /* raise latency from 32 (default) to 192, as this seems to prevent NIC | 
|  | lockups (under heavy rx loads) due to continuous 'FIFO OUT full' condition. | 
|  | this may impact the performances of other PCI devices on the same bus, though */ | 
|  | latency = 192; | 
|  | pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency); | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_CONFIGURE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | fore200e_pca_prom_read(struct fore200e* fore200e, struct prom_data* prom) | 
|  | { | 
|  | struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
|  | struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
|  | struct prom_opcode      opcode; | 
|  | int                     ok; | 
|  | u32                     prom_dma; | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
|  |  | 
|  | opcode.opcode = OPCODE_GET_PROM; | 
|  | opcode.pad    = 0; | 
|  |  | 
|  | prom_dma = fore200e->bus->dma_map(fore200e, prom, sizeof(struct prom_data), DMA_FROM_DEVICE); | 
|  |  | 
|  | fore200e->bus->write(prom_dma, &entry->cp_entry->cmd.prom_block.prom_haddr); | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  |  | 
|  | fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.prom_block.opcode); | 
|  |  | 
|  | ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
|  |  | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->dma_unmap(fore200e, prom_dma, sizeof(struct prom_data), DMA_FROM_DEVICE); | 
|  |  | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "unable to get PROM data from device %s\n", fore200e->name); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | #if defined(__BIG_ENDIAN) | 
|  |  | 
|  | #define swap_here(addr) (*((u32*)(addr)) = swab32( *((u32*)(addr)) )) | 
|  |  | 
|  | /* MAC address is stored as little-endian */ | 
|  | swap_here(&prom->mac_addr[0]); | 
|  | swap_here(&prom->mac_addr[4]); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_pca_proc_read(struct fore200e* fore200e, char *page) | 
|  | { | 
|  | struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev; | 
|  |  | 
|  | return sprintf(page, "   PCI bus/slot/function:\t%d/%d/%d\n", | 
|  | pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn)); | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_ATM_FORE200E_PCA */ | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_SBA | 
|  |  | 
|  | static u32 | 
|  | fore200e_sba_read(volatile u32 __iomem *addr) | 
|  | { | 
|  | return sbus_readl(addr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_write(u32 val, volatile u32 __iomem *addr) | 
|  | { | 
|  | sbus_writel(val, addr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static u32 | 
|  | fore200e_sba_dma_map(struct fore200e* fore200e, void* virt_addr, int size, int direction) | 
|  | { | 
|  | u32 dma_addr = sbus_map_single((struct sbus_dev*)fore200e->bus_dev, virt_addr, size, direction); | 
|  |  | 
|  | DPRINTK(3, "SBUS DVMA mapping: virt_addr = 0x%p, size = %d, direction = %d --> dma_addr = 0x%08x\n", | 
|  | virt_addr, size, direction, dma_addr); | 
|  |  | 
|  | return dma_addr; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_dma_unmap(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
|  | { | 
|  | DPRINTK(3, "SBUS DVMA unmapping: dma_addr = 0x%08x, size = %d, direction = %d,\n", | 
|  | dma_addr, size, direction); | 
|  |  | 
|  | sbus_unmap_single((struct sbus_dev*)fore200e->bus_dev, dma_addr, size, direction); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_dma_sync_for_cpu(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
|  | { | 
|  | DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
|  |  | 
|  | sbus_dma_sync_single_for_cpu((struct sbus_dev*)fore200e->bus_dev, dma_addr, size, direction); | 
|  | } | 
|  |  | 
|  | static void | 
|  | fore200e_sba_dma_sync_for_device(struct fore200e* fore200e, u32 dma_addr, int size, int direction) | 
|  | { | 
|  | DPRINTK(3, "SBUS DVMA sync: dma_addr = 0x%08x, size = %d, direction = %d\n", dma_addr, size, direction); | 
|  |  | 
|  | sbus_dma_sync_single_for_device((struct sbus_dev*)fore200e->bus_dev, dma_addr, size, direction); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* allocate a DVMA consistent chunk of memory intended to act as a communication mechanism | 
|  | (to hold descriptors, status, queues, etc.) shared by the driver and the adapter */ | 
|  |  | 
|  | static int | 
|  | fore200e_sba_dma_chunk_alloc(struct fore200e* fore200e, struct chunk* chunk, | 
|  | int size, int nbr, int alignment) | 
|  | { | 
|  | chunk->alloc_size = chunk->align_size = size * nbr; | 
|  |  | 
|  | /* returned chunks are page-aligned */ | 
|  | chunk->alloc_addr = sbus_alloc_consistent((struct sbus_dev*)fore200e->bus_dev, | 
|  | chunk->alloc_size, | 
|  | &chunk->dma_addr); | 
|  |  | 
|  | if ((chunk->alloc_addr == NULL) || (chunk->dma_addr == 0)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | chunk->align_addr = chunk->alloc_addr; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* free a DVMA consistent chunk of memory */ | 
|  |  | 
|  | static void | 
|  | fore200e_sba_dma_chunk_free(struct fore200e* fore200e, struct chunk* chunk) | 
|  | { | 
|  | sbus_free_consistent((struct sbus_dev*)fore200e->bus_dev, | 
|  | chunk->alloc_size, | 
|  | chunk->alloc_addr, | 
|  | chunk->dma_addr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_irq_enable(struct fore200e* fore200e) | 
|  | { | 
|  | u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY; | 
|  | fore200e->bus->write(hcr | SBA200E_HCR_INTR_ENA, fore200e->regs.sba.hcr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_sba_irq_check(struct fore200e* fore200e) | 
|  | { | 
|  | return fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_INTR_REQ; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_irq_ack(struct fore200e* fore200e) | 
|  | { | 
|  | u32 hcr = fore200e->bus->read(fore200e->regs.sba.hcr) & SBA200E_HCR_STICKY; | 
|  | fore200e->bus->write(hcr | SBA200E_HCR_INTR_CLR, fore200e->regs.sba.hcr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_reset(struct fore200e* fore200e) | 
|  | { | 
|  | fore200e->bus->write(SBA200E_HCR_RESET, fore200e->regs.sba.hcr); | 
|  | fore200e_spin(10); | 
|  | fore200e->bus->write(0, fore200e->regs.sba.hcr); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | fore200e_sba_map(struct fore200e* fore200e) | 
|  | { | 
|  | struct sbus_dev* sbus_dev = (struct sbus_dev*)fore200e->bus_dev; | 
|  | unsigned int bursts; | 
|  |  | 
|  | /* gain access to the SBA specific registers  */ | 
|  | fore200e->regs.sba.hcr = sbus_ioremap(&sbus_dev->resource[0], 0, SBA200E_HCR_LENGTH, "SBA HCR"); | 
|  | fore200e->regs.sba.bsr = sbus_ioremap(&sbus_dev->resource[1], 0, SBA200E_BSR_LENGTH, "SBA BSR"); | 
|  | fore200e->regs.sba.isr = sbus_ioremap(&sbus_dev->resource[2], 0, SBA200E_ISR_LENGTH, "SBA ISR"); | 
|  | fore200e->virt_base    = sbus_ioremap(&sbus_dev->resource[3], 0, SBA200E_RAM_LENGTH, "SBA RAM"); | 
|  |  | 
|  | if (fore200e->virt_base == NULL) { | 
|  | printk(FORE200E "unable to map RAM of device %s\n", fore200e->name); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | DPRINTK(1, "device %s mapped to 0x%p\n", fore200e->name, fore200e->virt_base); | 
|  |  | 
|  | fore200e->bus->write(0x02, fore200e->regs.sba.isr); /* XXX hardwired interrupt level */ | 
|  |  | 
|  | /* get the supported DVMA burst sizes */ | 
|  | bursts = prom_getintdefault(sbus_dev->bus->prom_node, "burst-sizes", 0x00); | 
|  |  | 
|  | if (sbus_can_dma_64bit(sbus_dev)) | 
|  | sbus_set_sbus64(sbus_dev, bursts); | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_MAP; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_sba_unmap(struct fore200e* fore200e) | 
|  | { | 
|  | sbus_iounmap(fore200e->regs.sba.hcr, SBA200E_HCR_LENGTH); | 
|  | sbus_iounmap(fore200e->regs.sba.bsr, SBA200E_BSR_LENGTH); | 
|  | sbus_iounmap(fore200e->regs.sba.isr, SBA200E_ISR_LENGTH); | 
|  | sbus_iounmap(fore200e->virt_base,    SBA200E_RAM_LENGTH); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | fore200e_sba_configure(struct fore200e* fore200e) | 
|  | { | 
|  | fore200e->state = FORE200E_STATE_CONFIGURE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct fore200e* __init | 
|  | fore200e_sba_detect(const struct fore200e_bus* bus, int index) | 
|  | { | 
|  | struct fore200e*          fore200e; | 
|  | struct sbus_bus* sbus_bus; | 
|  | struct sbus_dev* sbus_dev = NULL; | 
|  |  | 
|  | unsigned int     count = 0; | 
|  |  | 
|  | for_each_sbus (sbus_bus) { | 
|  | for_each_sbusdev (sbus_dev, sbus_bus) { | 
|  | if (strcmp(sbus_dev->prom_name, SBA200E_PROM_NAME) == 0) { | 
|  | if (count >= index) | 
|  | goto found; | 
|  | count++; | 
|  | } | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  |  | 
|  | found: | 
|  | if (sbus_dev->num_registers != 4) { | 
|  | printk(FORE200E "this %s device has %d instead of 4 registers\n", | 
|  | bus->model_name, sbus_dev->num_registers); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | fore200e = fore200e_kmalloc(sizeof(struct fore200e), GFP_KERNEL); | 
|  | if (fore200e == NULL) | 
|  | return NULL; | 
|  |  | 
|  | fore200e->bus     = bus; | 
|  | fore200e->bus_dev = sbus_dev; | 
|  | fore200e->irq     = sbus_dev->irqs[ 0 ]; | 
|  |  | 
|  | fore200e->phys_base = (unsigned long)sbus_dev; | 
|  |  | 
|  | sprintf(fore200e->name, "%s-%d", bus->model_name, index - 1); | 
|  |  | 
|  | return fore200e; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | fore200e_sba_prom_read(struct fore200e* fore200e, struct prom_data* prom) | 
|  | { | 
|  | struct sbus_dev* sbus_dev = (struct sbus_dev*) fore200e->bus_dev; | 
|  | int                       len; | 
|  |  | 
|  | len = prom_getproperty(sbus_dev->prom_node, "macaddrlo2", &prom->mac_addr[ 4 ], 4); | 
|  | if (len < 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | len = prom_getproperty(sbus_dev->prom_node, "macaddrhi4", &prom->mac_addr[ 2 ], 4); | 
|  | if (len < 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | prom_getproperty(sbus_dev->prom_node, "serialnumber", | 
|  | (char*)&prom->serial_number, sizeof(prom->serial_number)); | 
|  |  | 
|  | prom_getproperty(sbus_dev->prom_node, "promversion", | 
|  | (char*)&prom->hw_revision, sizeof(prom->hw_revision)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_sba_proc_read(struct fore200e* fore200e, char *page) | 
|  | { | 
|  | struct sbus_dev* sbus_dev = (struct sbus_dev*)fore200e->bus_dev; | 
|  |  | 
|  | return sprintf(page, "   SBUS slot/device:\t\t%d/'%s'\n", sbus_dev->slot, sbus_dev->prom_name); | 
|  | } | 
|  | #endif /* CONFIG_ATM_FORE200E_SBA */ | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_tx_irq(struct fore200e* fore200e) | 
|  | { | 
|  | struct host_txq*        txq = &fore200e->host_txq; | 
|  | struct host_txq_entry*  entry; | 
|  | struct atm_vcc*         vcc; | 
|  | struct fore200e_vc_map* vc_map; | 
|  |  | 
|  | if (fore200e->host_txq.txing == 0) | 
|  | return; | 
|  |  | 
|  | for (;;) { | 
|  |  | 
|  | entry = &txq->host_entry[ txq->tail ]; | 
|  |  | 
|  | if ((*entry->status & STATUS_COMPLETE) == 0) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | DPRINTK(3, "TX COMPLETED: entry = %p [tail = %d], vc_map = %p, skb = %p\n", | 
|  | entry, txq->tail, entry->vc_map, entry->skb); | 
|  |  | 
|  | /* free copy of misaligned data */ | 
|  | kfree(entry->data); | 
|  |  | 
|  | /* remove DMA mapping */ | 
|  | fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length, | 
|  | DMA_TO_DEVICE); | 
|  |  | 
|  | vc_map = entry->vc_map; | 
|  |  | 
|  | /* vcc closed since the time the entry was submitted for tx? */ | 
|  | if ((vc_map->vcc == NULL) || | 
|  | (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) { | 
|  |  | 
|  | DPRINTK(1, "no ready vcc found for PDU sent on device %d\n", | 
|  | fore200e->atm_dev->number); | 
|  |  | 
|  | dev_kfree_skb_any(entry->skb); | 
|  | } | 
|  | else { | 
|  | ASSERT(vc_map->vcc); | 
|  |  | 
|  | /* vcc closed then immediately re-opened? */ | 
|  | if (vc_map->incarn != entry->incarn) { | 
|  |  | 
|  | /* when a vcc is closed, some PDUs may be still pending in the tx queue. | 
|  | if the same vcc is immediately re-opened, those pending PDUs must | 
|  | not be popped after the completion of their emission, as they refer | 
|  | to the prior incarnation of that vcc. otherwise, sk_atm(vcc)->sk_wmem_alloc | 
|  | would be decremented by the size of the (unrelated) skb, possibly | 
|  | leading to a negative sk->sk_wmem_alloc count, ultimately freezing the vcc. | 
|  | we thus bind the tx entry to the current incarnation of the vcc | 
|  | when the entry is submitted for tx. When the tx later completes, | 
|  | if the incarnation number of the tx entry does not match the one | 
|  | of the vcc, then this implies that the vcc has been closed then re-opened. | 
|  | we thus just drop the skb here. */ | 
|  |  | 
|  | DPRINTK(1, "vcc closed-then-re-opened; dropping PDU sent on device %d\n", | 
|  | fore200e->atm_dev->number); | 
|  |  | 
|  | dev_kfree_skb_any(entry->skb); | 
|  | } | 
|  | else { | 
|  | vcc = vc_map->vcc; | 
|  | ASSERT(vcc); | 
|  |  | 
|  | /* notify tx completion */ | 
|  | if (vcc->pop) { | 
|  | vcc->pop(vcc, entry->skb); | 
|  | } | 
|  | else { | 
|  | dev_kfree_skb_any(entry->skb); | 
|  | } | 
|  | #if 1 | 
|  | /* race fixed by the above incarnation mechanism, but... */ | 
|  | if (atomic_read(&sk_atm(vcc)->sk_wmem_alloc) < 0) { | 
|  | atomic_set(&sk_atm(vcc)->sk_wmem_alloc, 0); | 
|  | } | 
|  | #endif | 
|  | /* check error condition */ | 
|  | if (*entry->status & STATUS_ERROR) | 
|  | atomic_inc(&vcc->stats->tx_err); | 
|  | else | 
|  | atomic_inc(&vcc->stats->tx); | 
|  | } | 
|  | } | 
|  |  | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | fore200e->host_txq.txing--; | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(txq->tail, QUEUE_SIZE_TX); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef FORE200E_BSQ_DEBUG | 
|  | int bsq_audit(int where, struct host_bsq* bsq, int scheme, int magn) | 
|  | { | 
|  | struct buffer* buffer; | 
|  | int count = 0; | 
|  |  | 
|  | buffer = bsq->freebuf; | 
|  | while (buffer) { | 
|  |  | 
|  | if (buffer->supplied) { | 
|  | printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld supplied but in free list!\n", | 
|  | where, scheme, magn, buffer->index); | 
|  | } | 
|  |  | 
|  | if (buffer->magn != magn) { | 
|  | printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected magn = %d\n", | 
|  | where, scheme, magn, buffer->index, buffer->magn); | 
|  | } | 
|  |  | 
|  | if (buffer->scheme != scheme) { | 
|  | printk(FORE200E "bsq_audit(%d): queue %d.%d, buffer %ld, unexpected scheme = %d\n", | 
|  | where, scheme, magn, buffer->index, buffer->scheme); | 
|  | } | 
|  |  | 
|  | if ((buffer->index < 0) || (buffer->index >= fore200e_rx_buf_nbr[ scheme ][ magn ])) { | 
|  | printk(FORE200E "bsq_audit(%d): queue %d.%d, out of range buffer index = %ld !\n", | 
|  | where, scheme, magn, buffer->index); | 
|  | } | 
|  |  | 
|  | count++; | 
|  | buffer = buffer->next; | 
|  | } | 
|  |  | 
|  | if (count != bsq->freebuf_count) { | 
|  | printk(FORE200E "bsq_audit(%d): queue %d.%d, %d bufs in free list, but freebuf_count = %d\n", | 
|  | where, scheme, magn, count, bsq->freebuf_count); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_supply(struct fore200e* fore200e) | 
|  | { | 
|  | int  scheme, magn, i; | 
|  |  | 
|  | struct host_bsq*       bsq; | 
|  | struct host_bsq_entry* entry; | 
|  | struct buffer*         buffer; | 
|  |  | 
|  | for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
|  | for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
|  |  | 
|  | bsq = &fore200e->host_bsq[ scheme ][ magn ]; | 
|  |  | 
|  | #ifdef FORE200E_BSQ_DEBUG | 
|  | bsq_audit(1, bsq, scheme, magn); | 
|  | #endif | 
|  | while (bsq->freebuf_count >= RBD_BLK_SIZE) { | 
|  |  | 
|  | DPRINTK(2, "supplying %d rx buffers to queue %d / %d, freebuf_count = %d\n", | 
|  | RBD_BLK_SIZE, scheme, magn, bsq->freebuf_count); | 
|  |  | 
|  | entry = &bsq->host_entry[ bsq->head ]; | 
|  |  | 
|  | for (i = 0; i < RBD_BLK_SIZE; i++) { | 
|  |  | 
|  | /* take the first buffer in the free buffer list */ | 
|  | buffer = bsq->freebuf; | 
|  | if (!buffer) { | 
|  | printk(FORE200E "no more free bufs in queue %d.%d, but freebuf_count = %d\n", | 
|  | scheme, magn, bsq->freebuf_count); | 
|  | return; | 
|  | } | 
|  | bsq->freebuf = buffer->next; | 
|  |  | 
|  | #ifdef FORE200E_BSQ_DEBUG | 
|  | if (buffer->supplied) | 
|  | printk(FORE200E "queue %d.%d, buffer %lu already supplied\n", | 
|  | scheme, magn, buffer->index); | 
|  | buffer->supplied = 1; | 
|  | #endif | 
|  | entry->rbd_block->rbd[ i ].buffer_haddr = buffer->data.dma_addr; | 
|  | entry->rbd_block->rbd[ i ].handle       = FORE200E_BUF2HDL(buffer); | 
|  | } | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(bsq->head, QUEUE_SIZE_BS); | 
|  |  | 
|  | /* decrease accordingly the number of free rx buffers */ | 
|  | bsq->freebuf_count -= RBD_BLK_SIZE; | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  | fore200e->bus->write(entry->rbd_block_dma, &entry->cp_entry->rbd_block_haddr); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_push_rpd(struct fore200e* fore200e, struct atm_vcc* vcc, struct rpd* rpd) | 
|  | { | 
|  | struct sk_buff*      skb; | 
|  | struct buffer*       buffer; | 
|  | struct fore200e_vcc* fore200e_vcc; | 
|  | int                  i, pdu_len = 0; | 
|  | #ifdef FORE200E_52BYTE_AAL0_SDU | 
|  | u32                  cell_header = 0; | 
|  | #endif | 
|  |  | 
|  | ASSERT(vcc); | 
|  |  | 
|  | fore200e_vcc = FORE200E_VCC(vcc); | 
|  | ASSERT(fore200e_vcc); | 
|  |  | 
|  | #ifdef FORE200E_52BYTE_AAL0_SDU | 
|  | if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.rxtp.max_sdu == ATM_AAL0_SDU)) { | 
|  |  | 
|  | cell_header = (rpd->atm_header.gfc << ATM_HDR_GFC_SHIFT) | | 
|  | (rpd->atm_header.vpi << ATM_HDR_VPI_SHIFT) | | 
|  | (rpd->atm_header.vci << ATM_HDR_VCI_SHIFT) | | 
|  | (rpd->atm_header.plt << ATM_HDR_PTI_SHIFT) | | 
|  | rpd->atm_header.clp; | 
|  | pdu_len = 4; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* compute total PDU length */ | 
|  | for (i = 0; i < rpd->nseg; i++) | 
|  | pdu_len += rpd->rsd[ i ].length; | 
|  |  | 
|  | skb = alloc_skb(pdu_len, GFP_ATOMIC); | 
|  | if (skb == NULL) { | 
|  | DPRINTK(2, "unable to alloc new skb, rx PDU length = %d\n", pdu_len); | 
|  |  | 
|  | atomic_inc(&vcc->stats->rx_drop); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | __net_timestamp(skb); | 
|  |  | 
|  | #ifdef FORE200E_52BYTE_AAL0_SDU | 
|  | if (cell_header) { | 
|  | *((u32*)skb_put(skb, 4)) = cell_header; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* reassemble segments */ | 
|  | for (i = 0; i < rpd->nseg; i++) { | 
|  |  | 
|  | /* rebuild rx buffer address from rsd handle */ | 
|  | buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle); | 
|  |  | 
|  | /* Make device DMA transfer visible to CPU.  */ | 
|  | fore200e->bus->dma_sync_for_cpu(fore200e, buffer->data.dma_addr, rpd->rsd[ i ].length, DMA_FROM_DEVICE); | 
|  |  | 
|  | memcpy(skb_put(skb, rpd->rsd[ i ].length), buffer->data.align_addr, rpd->rsd[ i ].length); | 
|  |  | 
|  | /* Now let the device get at it again.  */ | 
|  | fore200e->bus->dma_sync_for_device(fore200e, buffer->data.dma_addr, rpd->rsd[ i ].length, DMA_FROM_DEVICE); | 
|  | } | 
|  |  | 
|  | DPRINTK(3, "rx skb: len = %d, truesize = %d\n", skb->len, skb->truesize); | 
|  |  | 
|  | if (pdu_len < fore200e_vcc->rx_min_pdu) | 
|  | fore200e_vcc->rx_min_pdu = pdu_len; | 
|  | if (pdu_len > fore200e_vcc->rx_max_pdu) | 
|  | fore200e_vcc->rx_max_pdu = pdu_len; | 
|  | fore200e_vcc->rx_pdu++; | 
|  |  | 
|  | /* push PDU */ | 
|  | if (atm_charge(vcc, skb->truesize) == 0) { | 
|  |  | 
|  | DPRINTK(2, "receive buffers saturated for %d.%d.%d - PDU dropped\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci); | 
|  |  | 
|  | dev_kfree_skb_any(skb); | 
|  |  | 
|  | atomic_inc(&vcc->stats->rx_drop); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ASSERT(atomic_read(&sk_atm(vcc)->sk_wmem_alloc) >= 0); | 
|  |  | 
|  | vcc->push(vcc, skb); | 
|  | atomic_inc(&vcc->stats->rx); | 
|  |  | 
|  | ASSERT(atomic_read(&sk_atm(vcc)->sk_wmem_alloc) >= 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_collect_rpd(struct fore200e* fore200e, struct rpd* rpd) | 
|  | { | 
|  | struct host_bsq* bsq; | 
|  | struct buffer*   buffer; | 
|  | int              i; | 
|  |  | 
|  | for (i = 0; i < rpd->nseg; i++) { | 
|  |  | 
|  | /* rebuild rx buffer address from rsd handle */ | 
|  | buffer = FORE200E_HDL2BUF(rpd->rsd[ i ].handle); | 
|  |  | 
|  | bsq = &fore200e->host_bsq[ buffer->scheme ][ buffer->magn ]; | 
|  |  | 
|  | #ifdef FORE200E_BSQ_DEBUG | 
|  | bsq_audit(2, bsq, buffer->scheme, buffer->magn); | 
|  |  | 
|  | if (buffer->supplied == 0) | 
|  | printk(FORE200E "queue %d.%d, buffer %ld was not supplied\n", | 
|  | buffer->scheme, buffer->magn, buffer->index); | 
|  | buffer->supplied = 0; | 
|  | #endif | 
|  |  | 
|  | /* re-insert the buffer into the free buffer list */ | 
|  | buffer->next = bsq->freebuf; | 
|  | bsq->freebuf = buffer; | 
|  |  | 
|  | /* then increment the number of free rx buffers */ | 
|  | bsq->freebuf_count++; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_rx_irq(struct fore200e* fore200e) | 
|  | { | 
|  | struct host_rxq*        rxq = &fore200e->host_rxq; | 
|  | struct host_rxq_entry*  entry; | 
|  | struct atm_vcc*         vcc; | 
|  | struct fore200e_vc_map* vc_map; | 
|  |  | 
|  | for (;;) { | 
|  |  | 
|  | entry = &rxq->host_entry[ rxq->head ]; | 
|  |  | 
|  | /* no more received PDUs */ | 
|  | if ((*entry->status & STATUS_COMPLETE) == 0) | 
|  | break; | 
|  |  | 
|  | vc_map = FORE200E_VC_MAP(fore200e, entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); | 
|  |  | 
|  | if ((vc_map->vcc == NULL) || | 
|  | (test_bit(ATM_VF_READY, &vc_map->vcc->flags) == 0)) { | 
|  |  | 
|  | DPRINTK(1, "no ready VC found for PDU received on %d.%d.%d\n", | 
|  | fore200e->atm_dev->number, | 
|  | entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); | 
|  | } | 
|  | else { | 
|  | vcc = vc_map->vcc; | 
|  | ASSERT(vcc); | 
|  |  | 
|  | if ((*entry->status & STATUS_ERROR) == 0) { | 
|  |  | 
|  | fore200e_push_rpd(fore200e, vcc, entry->rpd); | 
|  | } | 
|  | else { | 
|  | DPRINTK(2, "damaged PDU on %d.%d.%d\n", | 
|  | fore200e->atm_dev->number, | 
|  | entry->rpd->atm_header.vpi, entry->rpd->atm_header.vci); | 
|  | atomic_inc(&vcc->stats->rx_err); | 
|  | } | 
|  | } | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(rxq->head, QUEUE_SIZE_RX); | 
|  |  | 
|  | fore200e_collect_rpd(fore200e, entry->rpd); | 
|  |  | 
|  | /* rewrite the rpd address to ack the received PDU */ | 
|  | fore200e->bus->write(entry->rpd_dma, &entry->cp_entry->rpd_haddr); | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | fore200e_supply(fore200e); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifndef FORE200E_USE_TASKLET | 
|  | static void | 
|  | fore200e_irq(struct fore200e* fore200e) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  | fore200e_rx_irq(fore200e); | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  | fore200e_tx_irq(fore200e); | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static irqreturn_t | 
|  | fore200e_interrupt(int irq, void* dev, struct pt_regs* regs) | 
|  | { | 
|  | struct fore200e* fore200e = FORE200E_DEV((struct atm_dev*)dev); | 
|  |  | 
|  | if (fore200e->bus->irq_check(fore200e) == 0) { | 
|  |  | 
|  | DPRINTK(3, "interrupt NOT triggered by device %d\n", fore200e->atm_dev->number); | 
|  | return IRQ_NONE; | 
|  | } | 
|  | DPRINTK(3, "interrupt triggered by device %d\n", fore200e->atm_dev->number); | 
|  |  | 
|  | #ifdef FORE200E_USE_TASKLET | 
|  | tasklet_schedule(&fore200e->tx_tasklet); | 
|  | tasklet_schedule(&fore200e->rx_tasklet); | 
|  | #else | 
|  | fore200e_irq(fore200e); | 
|  | #endif | 
|  |  | 
|  | fore200e->bus->irq_ack(fore200e); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef FORE200E_USE_TASKLET | 
|  | static void | 
|  | fore200e_tx_tasklet(unsigned long data) | 
|  | { | 
|  | struct fore200e* fore200e = (struct fore200e*) data; | 
|  | unsigned long flags; | 
|  |  | 
|  | DPRINTK(3, "tx tasklet scheduled for device %d\n", fore200e->atm_dev->number); | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  | fore200e_tx_irq(fore200e); | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_rx_tasklet(unsigned long data) | 
|  | { | 
|  | struct fore200e* fore200e = (struct fore200e*) data; | 
|  | unsigned long    flags; | 
|  |  | 
|  | DPRINTK(3, "rx tasklet scheduled for device %d\n", fore200e->atm_dev->number); | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  | fore200e_rx_irq((struct fore200e*) data); | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_select_scheme(struct atm_vcc* vcc) | 
|  | { | 
|  | /* fairly balance the VCs over (identical) buffer schemes */ | 
|  | int scheme = vcc->vci % 2 ? BUFFER_SCHEME_ONE : BUFFER_SCHEME_TWO; | 
|  |  | 
|  | DPRINTK(1, "VC %d.%d.%d uses buffer scheme %d\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci, scheme); | 
|  |  | 
|  | return scheme; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_activate_vcin(struct fore200e* fore200e, int activate, struct atm_vcc* vcc, int mtu) | 
|  | { | 
|  | struct host_cmdq*        cmdq  = &fore200e->host_cmdq; | 
|  | struct host_cmdq_entry*  entry = &cmdq->host_entry[ cmdq->head ]; | 
|  | struct activate_opcode   activ_opcode; | 
|  | struct deactivate_opcode deactiv_opcode; | 
|  | struct vpvc              vpvc; | 
|  | int                      ok; | 
|  | enum fore200e_aal        aal = fore200e_atm2fore_aal(vcc->qos.aal); | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
|  |  | 
|  | if (activate) { | 
|  | FORE200E_VCC(vcc)->scheme = fore200e_select_scheme(vcc); | 
|  |  | 
|  | activ_opcode.opcode = OPCODE_ACTIVATE_VCIN; | 
|  | activ_opcode.aal    = aal; | 
|  | activ_opcode.scheme = FORE200E_VCC(vcc)->scheme; | 
|  | activ_opcode.pad    = 0; | 
|  | } | 
|  | else { | 
|  | deactiv_opcode.opcode = OPCODE_DEACTIVATE_VCIN; | 
|  | deactiv_opcode.pad    = 0; | 
|  | } | 
|  |  | 
|  | vpvc.vci = vcc->vci; | 
|  | vpvc.vpi = vcc->vpi; | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  |  | 
|  | if (activate) { | 
|  |  | 
|  | #ifdef FORE200E_52BYTE_AAL0_SDU | 
|  | mtu = 48; | 
|  | #endif | 
|  | /* the MTU is not used by the cp, except in the case of AAL0 */ | 
|  | fore200e->bus->write(mtu,                        &entry->cp_entry->cmd.activate_block.mtu); | 
|  | fore200e->bus->write(*(u32*)&vpvc,         (u32 __iomem *)&entry->cp_entry->cmd.activate_block.vpvc); | 
|  | fore200e->bus->write(*(u32*)&activ_opcode, (u32 __iomem *)&entry->cp_entry->cmd.activate_block.opcode); | 
|  | } | 
|  | else { | 
|  | fore200e->bus->write(*(u32*)&vpvc,         (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.vpvc); | 
|  | fore200e->bus->write(*(u32*)&deactiv_opcode, (u32 __iomem *)&entry->cp_entry->cmd.deactivate_block.opcode); | 
|  | } | 
|  |  | 
|  | ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
|  |  | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "unable to %s VC %d.%d.%d\n", | 
|  | activate ? "open" : "close", vcc->itf, vcc->vpi, vcc->vci); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | DPRINTK(1, "VC %d.%d.%d %sed\n", vcc->itf, vcc->vpi, vcc->vci, | 
|  | activate ? "open" : "clos"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define FORE200E_MAX_BACK2BACK_CELLS 255    /* XXX depends on CDVT */ | 
|  |  | 
|  | static void | 
|  | fore200e_rate_ctrl(struct atm_qos* qos, struct tpd_rate* rate) | 
|  | { | 
|  | if (qos->txtp.max_pcr < ATM_OC3_PCR) { | 
|  |  | 
|  | /* compute the data cells to idle cells ratio from the tx PCR */ | 
|  | rate->data_cells = qos->txtp.max_pcr * FORE200E_MAX_BACK2BACK_CELLS / ATM_OC3_PCR; | 
|  | rate->idle_cells = FORE200E_MAX_BACK2BACK_CELLS - rate->data_cells; | 
|  | } | 
|  | else { | 
|  | /* disable rate control */ | 
|  | rate->data_cells = rate->idle_cells = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_open(struct atm_vcc *vcc) | 
|  | { | 
|  | struct fore200e*        fore200e = FORE200E_DEV(vcc->dev); | 
|  | struct fore200e_vcc*    fore200e_vcc; | 
|  | struct fore200e_vc_map* vc_map; | 
|  | unsigned long	    flags; | 
|  | int			    vci = vcc->vci; | 
|  | short		    vpi = vcc->vpi; | 
|  |  | 
|  | ASSERT((vpi >= 0) && (vpi < 1<<FORE200E_VPI_BITS)); | 
|  | ASSERT((vci >= 0) && (vci < 1<<FORE200E_VCI_BITS)); | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  |  | 
|  | vc_map = FORE200E_VC_MAP(fore200e, vpi, vci); | 
|  | if (vc_map->vcc) { | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  |  | 
|  | printk(FORE200E "VC %d.%d.%d already in use\n", | 
|  | fore200e->atm_dev->number, vpi, vci); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | vc_map->vcc = vcc; | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  |  | 
|  | fore200e_vcc = fore200e_kmalloc(sizeof(struct fore200e_vcc), GFP_ATOMIC); | 
|  | if (fore200e_vcc == NULL) { | 
|  | vc_map->vcc = NULL; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | DPRINTK(2, "opening %d.%d.%d:%d QoS = (tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; " | 
|  | "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d)\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
|  | fore200e_traffic_class[ vcc->qos.txtp.traffic_class ], | 
|  | vcc->qos.txtp.min_pcr, vcc->qos.txtp.max_pcr, vcc->qos.txtp.max_cdv, vcc->qos.txtp.max_sdu, | 
|  | fore200e_traffic_class[ vcc->qos.rxtp.traffic_class ], | 
|  | vcc->qos.rxtp.min_pcr, vcc->qos.rxtp.max_pcr, vcc->qos.rxtp.max_cdv, vcc->qos.rxtp.max_sdu); | 
|  |  | 
|  | /* pseudo-CBR bandwidth requested? */ | 
|  | if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { | 
|  |  | 
|  | down(&fore200e->rate_sf); | 
|  | if (fore200e->available_cell_rate < vcc->qos.txtp.max_pcr) { | 
|  | up(&fore200e->rate_sf); | 
|  |  | 
|  | fore200e_kfree(fore200e_vcc); | 
|  | vc_map->vcc = NULL; | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | /* reserve bandwidth */ | 
|  | fore200e->available_cell_rate -= vcc->qos.txtp.max_pcr; | 
|  | up(&fore200e->rate_sf); | 
|  | } | 
|  |  | 
|  | vcc->itf = vcc->dev->number; | 
|  |  | 
|  | set_bit(ATM_VF_PARTIAL,&vcc->flags); | 
|  | set_bit(ATM_VF_ADDR, &vcc->flags); | 
|  |  | 
|  | vcc->dev_data = fore200e_vcc; | 
|  |  | 
|  | if (fore200e_activate_vcin(fore200e, 1, vcc, vcc->qos.rxtp.max_sdu) < 0) { | 
|  |  | 
|  | vc_map->vcc = NULL; | 
|  |  | 
|  | clear_bit(ATM_VF_ADDR, &vcc->flags); | 
|  | clear_bit(ATM_VF_PARTIAL,&vcc->flags); | 
|  |  | 
|  | vcc->dev_data = NULL; | 
|  |  | 
|  | fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; | 
|  |  | 
|  | fore200e_kfree(fore200e_vcc); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* compute rate control parameters */ | 
|  | if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { | 
|  |  | 
|  | fore200e_rate_ctrl(&vcc->qos, &fore200e_vcc->rate); | 
|  | set_bit(ATM_VF_HASQOS, &vcc->flags); | 
|  |  | 
|  | DPRINTK(3, "tx on %d.%d.%d:%d, tx PCR = %d, rx PCR = %d, data_cells = %u, idle_cells = %u\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
|  | vcc->qos.txtp.max_pcr, vcc->qos.rxtp.max_pcr, | 
|  | fore200e_vcc->rate.data_cells, fore200e_vcc->rate.idle_cells); | 
|  | } | 
|  |  | 
|  | fore200e_vcc->tx_min_pdu = fore200e_vcc->rx_min_pdu = MAX_PDU_SIZE + 1; | 
|  | fore200e_vcc->tx_max_pdu = fore200e_vcc->rx_max_pdu = 0; | 
|  | fore200e_vcc->tx_pdu     = fore200e_vcc->rx_pdu     = 0; | 
|  |  | 
|  | /* new incarnation of the vcc */ | 
|  | vc_map->incarn = ++fore200e->incarn_count; | 
|  |  | 
|  | /* VC unusable before this flag is set */ | 
|  | set_bit(ATM_VF_READY, &vcc->flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void | 
|  | fore200e_close(struct atm_vcc* vcc) | 
|  | { | 
|  | struct fore200e*        fore200e = FORE200E_DEV(vcc->dev); | 
|  | struct fore200e_vcc*    fore200e_vcc; | 
|  | struct fore200e_vc_map* vc_map; | 
|  | unsigned long           flags; | 
|  |  | 
|  | ASSERT(vcc); | 
|  | ASSERT((vcc->vpi >= 0) && (vcc->vpi < 1<<FORE200E_VPI_BITS)); | 
|  | ASSERT((vcc->vci >= 0) && (vcc->vci < 1<<FORE200E_VCI_BITS)); | 
|  |  | 
|  | DPRINTK(2, "closing %d.%d.%d:%d\n", vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal)); | 
|  |  | 
|  | clear_bit(ATM_VF_READY, &vcc->flags); | 
|  |  | 
|  | fore200e_activate_vcin(fore200e, 0, vcc, 0); | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  |  | 
|  | vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci); | 
|  |  | 
|  | /* the vc is no longer considered as "in use" by fore200e_open() */ | 
|  | vc_map->vcc = NULL; | 
|  |  | 
|  | vcc->itf = vcc->vci = vcc->vpi = 0; | 
|  |  | 
|  | fore200e_vcc = FORE200E_VCC(vcc); | 
|  | vcc->dev_data = NULL; | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  |  | 
|  | /* release reserved bandwidth, if any */ | 
|  | if ((vcc->qos.txtp.traffic_class == ATM_CBR) && (vcc->qos.txtp.max_pcr > 0)) { | 
|  |  | 
|  | down(&fore200e->rate_sf); | 
|  | fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; | 
|  | up(&fore200e->rate_sf); | 
|  |  | 
|  | clear_bit(ATM_VF_HASQOS, &vcc->flags); | 
|  | } | 
|  |  | 
|  | clear_bit(ATM_VF_ADDR, &vcc->flags); | 
|  | clear_bit(ATM_VF_PARTIAL,&vcc->flags); | 
|  |  | 
|  | ASSERT(fore200e_vcc); | 
|  | fore200e_kfree(fore200e_vcc); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_send(struct atm_vcc *vcc, struct sk_buff *skb) | 
|  | { | 
|  | struct fore200e*        fore200e     = FORE200E_DEV(vcc->dev); | 
|  | struct fore200e_vcc*    fore200e_vcc = FORE200E_VCC(vcc); | 
|  | struct fore200e_vc_map* vc_map; | 
|  | struct host_txq*        txq          = &fore200e->host_txq; | 
|  | struct host_txq_entry*  entry; | 
|  | struct tpd*             tpd; | 
|  | struct tpd_haddr        tpd_haddr; | 
|  | int                     retry        = CONFIG_ATM_FORE200E_TX_RETRY; | 
|  | int                     tx_copy      = 0; | 
|  | int                     tx_len       = skb->len; | 
|  | u32*                    cell_header  = NULL; | 
|  | unsigned char*          skb_data; | 
|  | int                     skb_len; | 
|  | unsigned char*          data; | 
|  | unsigned long           flags; | 
|  |  | 
|  | ASSERT(vcc); | 
|  | ASSERT(atomic_read(&sk_atm(vcc)->sk_wmem_alloc) >= 0); | 
|  | ASSERT(fore200e); | 
|  | ASSERT(fore200e_vcc); | 
|  |  | 
|  | if (!test_bit(ATM_VF_READY, &vcc->flags)) { | 
|  | DPRINTK(1, "VC %d.%d.%d not ready for tx\n", vcc->itf, vcc->vpi, vcc->vpi); | 
|  | dev_kfree_skb_any(skb); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #ifdef FORE200E_52BYTE_AAL0_SDU | 
|  | if ((vcc->qos.aal == ATM_AAL0) && (vcc->qos.txtp.max_sdu == ATM_AAL0_SDU)) { | 
|  | cell_header = (u32*) skb->data; | 
|  | skb_data    = skb->data + 4;    /* skip 4-byte cell header */ | 
|  | skb_len     = tx_len = skb->len  - 4; | 
|  |  | 
|  | DPRINTK(3, "user-supplied cell header = 0x%08x\n", *cell_header); | 
|  | } | 
|  | else | 
|  | #endif | 
|  | { | 
|  | skb_data = skb->data; | 
|  | skb_len  = skb->len; | 
|  | } | 
|  |  | 
|  | if (((unsigned long)skb_data) & 0x3) { | 
|  |  | 
|  | DPRINTK(2, "misaligned tx PDU on device %s\n", fore200e->name); | 
|  | tx_copy = 1; | 
|  | tx_len  = skb_len; | 
|  | } | 
|  |  | 
|  | if ((vcc->qos.aal == ATM_AAL0) && (skb_len % ATM_CELL_PAYLOAD)) { | 
|  |  | 
|  | /* this simply NUKES the PCA board */ | 
|  | DPRINTK(2, "incomplete tx AAL0 PDU on device %s\n", fore200e->name); | 
|  | tx_copy = 1; | 
|  | tx_len  = ((skb_len / ATM_CELL_PAYLOAD) + 1) * ATM_CELL_PAYLOAD; | 
|  | } | 
|  |  | 
|  | if (tx_copy) { | 
|  | data = kmalloc(tx_len, GFP_ATOMIC | GFP_DMA); | 
|  | if (data == NULL) { | 
|  | if (vcc->pop) { | 
|  | vcc->pop(vcc, skb); | 
|  | } | 
|  | else { | 
|  | dev_kfree_skb_any(skb); | 
|  | } | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | memcpy(data, skb_data, skb_len); | 
|  | if (skb_len < tx_len) | 
|  | memset(data + skb_len, 0x00, tx_len - skb_len); | 
|  | } | 
|  | else { | 
|  | data = skb_data; | 
|  | } | 
|  |  | 
|  | vc_map = FORE200E_VC_MAP(fore200e, vcc->vpi, vcc->vci); | 
|  | ASSERT(vc_map->vcc == vcc); | 
|  |  | 
|  | retry_here: | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  |  | 
|  | entry = &txq->host_entry[ txq->head ]; | 
|  |  | 
|  | if ((*entry->status != STATUS_FREE) || (txq->txing >= QUEUE_SIZE_TX - 2)) { | 
|  |  | 
|  | /* try to free completed tx queue entries */ | 
|  | fore200e_tx_irq(fore200e); | 
|  |  | 
|  | if (*entry->status != STATUS_FREE) { | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  |  | 
|  | /* retry once again? */ | 
|  | if (--retry > 0) { | 
|  | udelay(50); | 
|  | goto retry_here; | 
|  | } | 
|  |  | 
|  | atomic_inc(&vcc->stats->tx_err); | 
|  |  | 
|  | fore200e->tx_sat++; | 
|  | DPRINTK(2, "tx queue of device %s is saturated, PDU dropped - heartbeat is %08x\n", | 
|  | fore200e->name, fore200e->cp_queues->heartbeat); | 
|  | if (vcc->pop) { | 
|  | vcc->pop(vcc, skb); | 
|  | } | 
|  | else { | 
|  | dev_kfree_skb_any(skb); | 
|  | } | 
|  |  | 
|  | if (tx_copy) | 
|  | kfree(data); | 
|  |  | 
|  | return -ENOBUFS; | 
|  | } | 
|  | } | 
|  |  | 
|  | entry->incarn = vc_map->incarn; | 
|  | entry->vc_map = vc_map; | 
|  | entry->skb    = skb; | 
|  | entry->data   = tx_copy ? data : NULL; | 
|  |  | 
|  | tpd = entry->tpd; | 
|  | tpd->tsd[ 0 ].buffer = fore200e->bus->dma_map(fore200e, data, tx_len, DMA_TO_DEVICE); | 
|  | tpd->tsd[ 0 ].length = tx_len; | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(txq->head, QUEUE_SIZE_TX); | 
|  | txq->txing++; | 
|  |  | 
|  | /* The dma_map call above implies a dma_sync so the device can use it, | 
|  | * thus no explicit dma_sync call is necessary here. | 
|  | */ | 
|  |  | 
|  | DPRINTK(3, "tx on %d.%d.%d:%d, len = %u (%u)\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
|  | tpd->tsd[0].length, skb_len); | 
|  |  | 
|  | if (skb_len < fore200e_vcc->tx_min_pdu) | 
|  | fore200e_vcc->tx_min_pdu = skb_len; | 
|  | if (skb_len > fore200e_vcc->tx_max_pdu) | 
|  | fore200e_vcc->tx_max_pdu = skb_len; | 
|  | fore200e_vcc->tx_pdu++; | 
|  |  | 
|  | /* set tx rate control information */ | 
|  | tpd->rate.data_cells = fore200e_vcc->rate.data_cells; | 
|  | tpd->rate.idle_cells = fore200e_vcc->rate.idle_cells; | 
|  |  | 
|  | if (cell_header) { | 
|  | tpd->atm_header.clp = (*cell_header & ATM_HDR_CLP); | 
|  | tpd->atm_header.plt = (*cell_header & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT; | 
|  | tpd->atm_header.vci = (*cell_header & ATM_HDR_VCI_MASK) >> ATM_HDR_VCI_SHIFT; | 
|  | tpd->atm_header.vpi = (*cell_header & ATM_HDR_VPI_MASK) >> ATM_HDR_VPI_SHIFT; | 
|  | tpd->atm_header.gfc = (*cell_header & ATM_HDR_GFC_MASK) >> ATM_HDR_GFC_SHIFT; | 
|  | } | 
|  | else { | 
|  | /* set the ATM header, common to all cells conveying the PDU */ | 
|  | tpd->atm_header.clp = 0; | 
|  | tpd->atm_header.plt = 0; | 
|  | tpd->atm_header.vci = vcc->vci; | 
|  | tpd->atm_header.vpi = vcc->vpi; | 
|  | tpd->atm_header.gfc = 0; | 
|  | } | 
|  |  | 
|  | tpd->spec.length = tx_len; | 
|  | tpd->spec.nseg   = 1; | 
|  | tpd->spec.aal    = fore200e_atm2fore_aal(vcc->qos.aal); | 
|  | tpd->spec.intr   = 1; | 
|  |  | 
|  | tpd_haddr.size  = sizeof(struct tpd) / (1<<TPD_HADDR_SHIFT);  /* size is expressed in 32 byte blocks */ | 
|  | tpd_haddr.pad   = 0; | 
|  | tpd_haddr.haddr = entry->tpd_dma >> TPD_HADDR_SHIFT;          /* shift the address, as we are in a bitfield */ | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  | fore200e->bus->write(*(u32*)&tpd_haddr, (u32 __iomem *)&entry->cp_entry->tpd_haddr); | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_getstats(struct fore200e* fore200e) | 
|  | { | 
|  | struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
|  | struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
|  | struct stats_opcode     opcode; | 
|  | int                     ok; | 
|  | u32                     stats_dma_addr; | 
|  |  | 
|  | if (fore200e->stats == NULL) { | 
|  | fore200e->stats = fore200e_kmalloc(sizeof(struct stats), GFP_KERNEL | GFP_DMA); | 
|  | if (fore200e->stats == NULL) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | stats_dma_addr = fore200e->bus->dma_map(fore200e, fore200e->stats, | 
|  | sizeof(struct stats), DMA_FROM_DEVICE); | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
|  |  | 
|  | opcode.opcode = OPCODE_GET_STATS; | 
|  | opcode.pad    = 0; | 
|  |  | 
|  | fore200e->bus->write(stats_dma_addr, &entry->cp_entry->cmd.stats_block.stats_haddr); | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  |  | 
|  | fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.stats_block.opcode); | 
|  |  | 
|  | ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
|  |  | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->dma_unmap(fore200e, stats_dma_addr, sizeof(struct stats), DMA_FROM_DEVICE); | 
|  |  | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "unable to get statistics from device %s\n", fore200e->name); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_getsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen) | 
|  | { | 
|  | /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */ | 
|  |  | 
|  | DPRINTK(2, "getsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci, level, optname, optval, optlen); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen) | 
|  | { | 
|  | /* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */ | 
|  |  | 
|  | DPRINTK(2, "setsockopt %d.%d.%d, level = %d, optname = 0x%x, optval = 0x%p, optlen = %d\n", | 
|  | vcc->itf, vcc->vpi, vcc->vci, level, optname, optval, optlen); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | #if 0 /* currently unused */ | 
|  | static int | 
|  | fore200e_get_oc3(struct fore200e* fore200e, struct oc3_regs* regs) | 
|  | { | 
|  | struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
|  | struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
|  | struct oc3_opcode       opcode; | 
|  | int                     ok; | 
|  | u32                     oc3_regs_dma_addr; | 
|  |  | 
|  | oc3_regs_dma_addr = fore200e->bus->dma_map(fore200e, regs, sizeof(struct oc3_regs), DMA_FROM_DEVICE); | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
|  |  | 
|  | opcode.opcode = OPCODE_GET_OC3; | 
|  | opcode.reg    = 0; | 
|  | opcode.value  = 0; | 
|  | opcode.mask   = 0; | 
|  |  | 
|  | fore200e->bus->write(oc3_regs_dma_addr, &entry->cp_entry->cmd.oc3_block.regs_haddr); | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  |  | 
|  | fore200e->bus->write(*(u32*)&opcode, (u32*)&entry->cp_entry->cmd.oc3_block.opcode); | 
|  |  | 
|  | ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
|  |  | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->dma_unmap(fore200e, oc3_regs_dma_addr, sizeof(struct oc3_regs), DMA_FROM_DEVICE); | 
|  |  | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "unable to get OC-3 regs of device %s\n", fore200e->name); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_set_oc3(struct fore200e* fore200e, u32 reg, u32 value, u32 mask) | 
|  | { | 
|  | struct host_cmdq*       cmdq  = &fore200e->host_cmdq; | 
|  | struct host_cmdq_entry* entry = &cmdq->host_entry[ cmdq->head ]; | 
|  | struct oc3_opcode       opcode; | 
|  | int                     ok; | 
|  |  | 
|  | DPRINTK(2, "set OC-3 reg = 0x%02x, value = 0x%02x, mask = 0x%02x\n", reg, value, mask); | 
|  |  | 
|  | FORE200E_NEXT_ENTRY(cmdq->head, QUEUE_SIZE_CMD); | 
|  |  | 
|  | opcode.opcode = OPCODE_SET_OC3; | 
|  | opcode.reg    = reg; | 
|  | opcode.value  = value; | 
|  | opcode.mask   = mask; | 
|  |  | 
|  | fore200e->bus->write(0, &entry->cp_entry->cmd.oc3_block.regs_haddr); | 
|  |  | 
|  | *entry->status = STATUS_PENDING; | 
|  |  | 
|  | fore200e->bus->write(*(u32*)&opcode, (u32 __iomem *)&entry->cp_entry->cmd.oc3_block.opcode); | 
|  |  | 
|  | ok = fore200e_poll(fore200e, entry->status, STATUS_COMPLETE, 400); | 
|  |  | 
|  | *entry->status = STATUS_FREE; | 
|  |  | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "unable to set OC-3 reg 0x%02x of device %s\n", reg, fore200e->name); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_setloop(struct fore200e* fore200e, int loop_mode) | 
|  | { | 
|  | u32 mct_value, mct_mask; | 
|  | int error; | 
|  |  | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | switch (loop_mode) { | 
|  |  | 
|  | case ATM_LM_NONE: | 
|  | mct_value = 0; | 
|  | mct_mask  = SUNI_MCT_DLE | SUNI_MCT_LLE; | 
|  | break; | 
|  |  | 
|  | case ATM_LM_LOC_PHY: | 
|  | mct_value = mct_mask = SUNI_MCT_DLE; | 
|  | break; | 
|  |  | 
|  | case ATM_LM_RMT_PHY: | 
|  | mct_value = mct_mask = SUNI_MCT_LLE; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | error = fore200e_set_oc3(fore200e, SUNI_MCT, mct_value, mct_mask); | 
|  | if (error == 0) | 
|  | fore200e->loop_mode = loop_mode; | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  |  | 
|  | static inline unsigned int | 
|  | fore200e_swap(unsigned int in) | 
|  | { | 
|  | #if defined(__LITTLE_ENDIAN) | 
|  | return swab32(in); | 
|  | #else | 
|  | return in; | 
|  | #endif | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_fetch_stats(struct fore200e* fore200e, struct sonet_stats __user *arg) | 
|  | { | 
|  | struct sonet_stats tmp; | 
|  |  | 
|  | if (fore200e_getstats(fore200e) < 0) | 
|  | return -EIO; | 
|  |  | 
|  | tmp.section_bip = fore200e_swap(fore200e->stats->oc3.section_bip8_errors); | 
|  | tmp.line_bip    = fore200e_swap(fore200e->stats->oc3.line_bip24_errors); | 
|  | tmp.path_bip    = fore200e_swap(fore200e->stats->oc3.path_bip8_errors); | 
|  | tmp.line_febe   = fore200e_swap(fore200e->stats->oc3.line_febe_errors); | 
|  | tmp.path_febe   = fore200e_swap(fore200e->stats->oc3.path_febe_errors); | 
|  | tmp.corr_hcs    = fore200e_swap(fore200e->stats->oc3.corr_hcs_errors); | 
|  | tmp.uncorr_hcs  = fore200e_swap(fore200e->stats->oc3.ucorr_hcs_errors); | 
|  | tmp.tx_cells    = fore200e_swap(fore200e->stats->aal0.cells_transmitted)  + | 
|  | fore200e_swap(fore200e->stats->aal34.cells_transmitted) + | 
|  | fore200e_swap(fore200e->stats->aal5.cells_transmitted); | 
|  | tmp.rx_cells    = fore200e_swap(fore200e->stats->aal0.cells_received)     + | 
|  | fore200e_swap(fore200e->stats->aal34.cells_received)    + | 
|  | fore200e_swap(fore200e->stats->aal5.cells_received); | 
|  |  | 
|  | if (arg) | 
|  | return copy_to_user(arg, &tmp, sizeof(struct sonet_stats)) ? -EFAULT : 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_ioctl(struct atm_dev* dev, unsigned int cmd, void __user * arg) | 
|  | { | 
|  | struct fore200e* fore200e = FORE200E_DEV(dev); | 
|  |  | 
|  | DPRINTK(2, "ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg); | 
|  |  | 
|  | switch (cmd) { | 
|  |  | 
|  | case SONET_GETSTAT: | 
|  | return fore200e_fetch_stats(fore200e, (struct sonet_stats __user *)arg); | 
|  |  | 
|  | case SONET_GETDIAG: | 
|  | return put_user(0, (int __user *)arg) ? -EFAULT : 0; | 
|  |  | 
|  | case ATM_SETLOOP: | 
|  | return fore200e_setloop(fore200e, (int)(unsigned long)arg); | 
|  |  | 
|  | case ATM_GETLOOP: | 
|  | return put_user(fore200e->loop_mode, (int __user *)arg) ? -EFAULT : 0; | 
|  |  | 
|  | case ATM_QUERYLOOP: | 
|  | return put_user(ATM_LM_LOC_PHY | ATM_LM_RMT_PHY, (int __user *)arg) ? -EFAULT : 0; | 
|  | } | 
|  |  | 
|  | return -ENOSYS; /* not implemented */ | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags) | 
|  | { | 
|  | struct fore200e_vcc* fore200e_vcc = FORE200E_VCC(vcc); | 
|  | struct fore200e*     fore200e     = FORE200E_DEV(vcc->dev); | 
|  |  | 
|  | if (!test_bit(ATM_VF_READY, &vcc->flags)) { | 
|  | DPRINTK(1, "VC %d.%d.%d not ready for QoS change\n", vcc->itf, vcc->vpi, vcc->vpi); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | DPRINTK(2, "change_qos %d.%d.%d, " | 
|  | "(tx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d; " | 
|  | "rx: cl=%s, pcr=%d-%d, cdv=%d, max_sdu=%d), flags = 0x%x\n" | 
|  | "available_cell_rate = %u", | 
|  | vcc->itf, vcc->vpi, vcc->vci, | 
|  | fore200e_traffic_class[ qos->txtp.traffic_class ], | 
|  | qos->txtp.min_pcr, qos->txtp.max_pcr, qos->txtp.max_cdv, qos->txtp.max_sdu, | 
|  | fore200e_traffic_class[ qos->rxtp.traffic_class ], | 
|  | qos->rxtp.min_pcr, qos->rxtp.max_pcr, qos->rxtp.max_cdv, qos->rxtp.max_sdu, | 
|  | flags, fore200e->available_cell_rate); | 
|  |  | 
|  | if ((qos->txtp.traffic_class == ATM_CBR) && (qos->txtp.max_pcr > 0)) { | 
|  |  | 
|  | down(&fore200e->rate_sf); | 
|  | if (fore200e->available_cell_rate + vcc->qos.txtp.max_pcr < qos->txtp.max_pcr) { | 
|  | up(&fore200e->rate_sf); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | fore200e->available_cell_rate += vcc->qos.txtp.max_pcr; | 
|  | fore200e->available_cell_rate -= qos->txtp.max_pcr; | 
|  |  | 
|  | up(&fore200e->rate_sf); | 
|  |  | 
|  | memcpy(&vcc->qos, qos, sizeof(struct atm_qos)); | 
|  |  | 
|  | /* update rate control parameters */ | 
|  | fore200e_rate_ctrl(qos, &fore200e_vcc->rate); | 
|  |  | 
|  | set_bit(ATM_VF_HASQOS, &vcc->flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_irq_request(struct fore200e* fore200e) | 
|  | { | 
|  | if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) { | 
|  |  | 
|  | printk(FORE200E "unable to reserve IRQ %s for device %s\n", | 
|  | fore200e_irq_itoa(fore200e->irq), fore200e->name); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | printk(FORE200E "IRQ %s reserved for device %s\n", | 
|  | fore200e_irq_itoa(fore200e->irq), fore200e->name); | 
|  |  | 
|  | #ifdef FORE200E_USE_TASKLET | 
|  | tasklet_init(&fore200e->tx_tasklet, fore200e_tx_tasklet, (unsigned long)fore200e); | 
|  | tasklet_init(&fore200e->rx_tasklet, fore200e_rx_tasklet, (unsigned long)fore200e); | 
|  | #endif | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_IRQ; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_get_esi(struct fore200e* fore200e) | 
|  | { | 
|  | struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA); | 
|  | int ok, i; | 
|  |  | 
|  | if (!prom) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ok = fore200e->bus->prom_read(fore200e, prom); | 
|  | if (ok < 0) { | 
|  | fore200e_kfree(prom); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %02x:%02x:%02x:%02x:%02x:%02x\n", | 
|  | fore200e->name, | 
|  | (prom->hw_revision & 0xFF) + '@',    /* probably meaningless with SBA boards */ | 
|  | prom->serial_number & 0xFFFF, | 
|  | prom->mac_addr[ 2 ], prom->mac_addr[ 3 ], prom->mac_addr[ 4 ], | 
|  | prom->mac_addr[ 5 ], prom->mac_addr[ 6 ], prom->mac_addr[ 7 ]); | 
|  |  | 
|  | for (i = 0; i < ESI_LEN; i++) { | 
|  | fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ]; | 
|  | } | 
|  |  | 
|  | fore200e_kfree(prom); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_alloc_rx_buf(struct fore200e* fore200e) | 
|  | { | 
|  | int scheme, magn, nbr, size, i; | 
|  |  | 
|  | struct host_bsq* bsq; | 
|  | struct buffer*   buffer; | 
|  |  | 
|  | for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
|  | for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
|  |  | 
|  | bsq = &fore200e->host_bsq[ scheme ][ magn ]; | 
|  |  | 
|  | nbr  = fore200e_rx_buf_nbr[ scheme ][ magn ]; | 
|  | size = fore200e_rx_buf_size[ scheme ][ magn ]; | 
|  |  | 
|  | DPRINTK(2, "rx buffers %d / %d are being allocated\n", scheme, magn); | 
|  |  | 
|  | /* allocate the array of receive buffers */ | 
|  | buffer = bsq->buffer = fore200e_kmalloc(nbr * sizeof(struct buffer), GFP_KERNEL); | 
|  |  | 
|  | if (buffer == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | bsq->freebuf = NULL; | 
|  |  | 
|  | for (i = 0; i < nbr; i++) { | 
|  |  | 
|  | buffer[ i ].scheme = scheme; | 
|  | buffer[ i ].magn   = magn; | 
|  | #ifdef FORE200E_BSQ_DEBUG | 
|  | buffer[ i ].index  = i; | 
|  | buffer[ i ].supplied = 0; | 
|  | #endif | 
|  |  | 
|  | /* allocate the receive buffer body */ | 
|  | if (fore200e_chunk_alloc(fore200e, | 
|  | &buffer[ i ].data, size, fore200e->bus->buffer_alignment, | 
|  | DMA_FROM_DEVICE) < 0) { | 
|  |  | 
|  | while (i > 0) | 
|  | fore200e_chunk_free(fore200e, &buffer[ --i ].data); | 
|  | fore200e_kfree(buffer); | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* insert the buffer into the free buffer list */ | 
|  | buffer[ i ].next = bsq->freebuf; | 
|  | bsq->freebuf = &buffer[ i ]; | 
|  | } | 
|  | /* all the buffers are free, initially */ | 
|  | bsq->freebuf_count = nbr; | 
|  |  | 
|  | #ifdef FORE200E_BSQ_DEBUG | 
|  | bsq_audit(3, bsq, scheme, magn); | 
|  | #endif | 
|  | } | 
|  | } | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_ALLOC_BUF; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_init_bs_queue(struct fore200e* fore200e) | 
|  | { | 
|  | int scheme, magn, i; | 
|  |  | 
|  | struct host_bsq*     bsq; | 
|  | struct cp_bsq_entry __iomem * cp_entry; | 
|  |  | 
|  | for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) { | 
|  | for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) { | 
|  |  | 
|  | DPRINTK(2, "buffer supply queue %d / %d is being initialized\n", scheme, magn); | 
|  |  | 
|  | bsq = &fore200e->host_bsq[ scheme ][ magn ]; | 
|  |  | 
|  | /* allocate and align the array of status words */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &bsq->status, | 
|  | sizeof(enum status), | 
|  | QUEUE_SIZE_BS, | 
|  | fore200e->bus->status_alignment) < 0) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* allocate and align the array of receive buffer descriptors */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &bsq->rbd_block, | 
|  | sizeof(struct rbd_block), | 
|  | QUEUE_SIZE_BS, | 
|  | fore200e->bus->descr_alignment) < 0) { | 
|  |  | 
|  | fore200e->bus->dma_chunk_free(fore200e, &bsq->status); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* get the base address of the cp resident buffer supply queue entries */ | 
|  | cp_entry = fore200e->virt_base + | 
|  | fore200e->bus->read(&fore200e->cp_queues->cp_bsq[ scheme ][ magn ]); | 
|  |  | 
|  | /* fill the host resident and cp resident buffer supply queue entries */ | 
|  | for (i = 0; i < QUEUE_SIZE_BS; i++) { | 
|  |  | 
|  | bsq->host_entry[ i ].status = | 
|  | FORE200E_INDEX(bsq->status.align_addr, enum status, i); | 
|  | bsq->host_entry[ i ].rbd_block = | 
|  | FORE200E_INDEX(bsq->rbd_block.align_addr, struct rbd_block, i); | 
|  | bsq->host_entry[ i ].rbd_block_dma = | 
|  | FORE200E_DMA_INDEX(bsq->rbd_block.dma_addr, struct rbd_block, i); | 
|  | bsq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
|  |  | 
|  | *bsq->host_entry[ i ].status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->write(FORE200E_DMA_INDEX(bsq->status.dma_addr, enum status, i), | 
|  | &cp_entry[ i ].status_haddr); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_INIT_BSQ; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_init_rx_queue(struct fore200e* fore200e) | 
|  | { | 
|  | struct host_rxq*     rxq =  &fore200e->host_rxq; | 
|  | struct cp_rxq_entry __iomem * cp_entry; | 
|  | int i; | 
|  |  | 
|  | DPRINTK(2, "receive queue is being initialized\n"); | 
|  |  | 
|  | /* allocate and align the array of status words */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &rxq->status, | 
|  | sizeof(enum status), | 
|  | QUEUE_SIZE_RX, | 
|  | fore200e->bus->status_alignment) < 0) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* allocate and align the array of receive PDU descriptors */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &rxq->rpd, | 
|  | sizeof(struct rpd), | 
|  | QUEUE_SIZE_RX, | 
|  | fore200e->bus->descr_alignment) < 0) { | 
|  |  | 
|  | fore200e->bus->dma_chunk_free(fore200e, &rxq->status); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* get the base address of the cp resident rx queue entries */ | 
|  | cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_rxq); | 
|  |  | 
|  | /* fill the host resident and cp resident rx entries */ | 
|  | for (i=0; i < QUEUE_SIZE_RX; i++) { | 
|  |  | 
|  | rxq->host_entry[ i ].status = | 
|  | FORE200E_INDEX(rxq->status.align_addr, enum status, i); | 
|  | rxq->host_entry[ i ].rpd = | 
|  | FORE200E_INDEX(rxq->rpd.align_addr, struct rpd, i); | 
|  | rxq->host_entry[ i ].rpd_dma = | 
|  | FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i); | 
|  | rxq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
|  |  | 
|  | *rxq->host_entry[ i ].status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->write(FORE200E_DMA_INDEX(rxq->status.dma_addr, enum status, i), | 
|  | &cp_entry[ i ].status_haddr); | 
|  |  | 
|  | fore200e->bus->write(FORE200E_DMA_INDEX(rxq->rpd.dma_addr, struct rpd, i), | 
|  | &cp_entry[ i ].rpd_haddr); | 
|  | } | 
|  |  | 
|  | /* set the head entry of the queue */ | 
|  | rxq->head = 0; | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_INIT_RXQ; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_init_tx_queue(struct fore200e* fore200e) | 
|  | { | 
|  | struct host_txq*     txq =  &fore200e->host_txq; | 
|  | struct cp_txq_entry __iomem * cp_entry; | 
|  | int i; | 
|  |  | 
|  | DPRINTK(2, "transmit queue is being initialized\n"); | 
|  |  | 
|  | /* allocate and align the array of status words */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &txq->status, | 
|  | sizeof(enum status), | 
|  | QUEUE_SIZE_TX, | 
|  | fore200e->bus->status_alignment) < 0) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* allocate and align the array of transmit PDU descriptors */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &txq->tpd, | 
|  | sizeof(struct tpd), | 
|  | QUEUE_SIZE_TX, | 
|  | fore200e->bus->descr_alignment) < 0) { | 
|  |  | 
|  | fore200e->bus->dma_chunk_free(fore200e, &txq->status); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* get the base address of the cp resident tx queue entries */ | 
|  | cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_txq); | 
|  |  | 
|  | /* fill the host resident and cp resident tx entries */ | 
|  | for (i=0; i < QUEUE_SIZE_TX; i++) { | 
|  |  | 
|  | txq->host_entry[ i ].status = | 
|  | FORE200E_INDEX(txq->status.align_addr, enum status, i); | 
|  | txq->host_entry[ i ].tpd = | 
|  | FORE200E_INDEX(txq->tpd.align_addr, struct tpd, i); | 
|  | txq->host_entry[ i ].tpd_dma  = | 
|  | FORE200E_DMA_INDEX(txq->tpd.dma_addr, struct tpd, i); | 
|  | txq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
|  |  | 
|  | *txq->host_entry[ i ].status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->write(FORE200E_DMA_INDEX(txq->status.dma_addr, enum status, i), | 
|  | &cp_entry[ i ].status_haddr); | 
|  |  | 
|  | /* although there is a one-to-one mapping of tx queue entries and tpds, | 
|  | we do not write here the DMA (physical) base address of each tpd into | 
|  | the related cp resident entry, because the cp relies on this write | 
|  | operation to detect that a new pdu has been submitted for tx */ | 
|  | } | 
|  |  | 
|  | /* set the head and tail entries of the queue */ | 
|  | txq->head = 0; | 
|  | txq->tail = 0; | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_INIT_TXQ; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_init_cmd_queue(struct fore200e* fore200e) | 
|  | { | 
|  | struct host_cmdq*     cmdq =  &fore200e->host_cmdq; | 
|  | struct cp_cmdq_entry __iomem * cp_entry; | 
|  | int i; | 
|  |  | 
|  | DPRINTK(2, "command queue is being initialized\n"); | 
|  |  | 
|  | /* allocate and align the array of status words */ | 
|  | if (fore200e->bus->dma_chunk_alloc(fore200e, | 
|  | &cmdq->status, | 
|  | sizeof(enum status), | 
|  | QUEUE_SIZE_CMD, | 
|  | fore200e->bus->status_alignment) < 0) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* get the base address of the cp resident cmd queue entries */ | 
|  | cp_entry = fore200e->virt_base + fore200e->bus->read(&fore200e->cp_queues->cp_cmdq); | 
|  |  | 
|  | /* fill the host resident and cp resident cmd entries */ | 
|  | for (i=0; i < QUEUE_SIZE_CMD; i++) { | 
|  |  | 
|  | cmdq->host_entry[ i ].status   = | 
|  | FORE200E_INDEX(cmdq->status.align_addr, enum status, i); | 
|  | cmdq->host_entry[ i ].cp_entry = &cp_entry[ i ]; | 
|  |  | 
|  | *cmdq->host_entry[ i ].status = STATUS_FREE; | 
|  |  | 
|  | fore200e->bus->write(FORE200E_DMA_INDEX(cmdq->status.dma_addr, enum status, i), | 
|  | &cp_entry[ i ].status_haddr); | 
|  | } | 
|  |  | 
|  | /* set the head entry of the queue */ | 
|  | cmdq->head = 0; | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_INIT_CMDQ; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __init | 
|  | fore200e_param_bs_queue(struct fore200e* fore200e, | 
|  | enum buffer_scheme scheme, enum buffer_magn magn, | 
|  | int queue_length, int pool_size, int supply_blksize) | 
|  | { | 
|  | struct bs_spec __iomem * bs_spec = &fore200e->cp_queues->init.bs_spec[ scheme ][ magn ]; | 
|  |  | 
|  | fore200e->bus->write(queue_length,                           &bs_spec->queue_length); | 
|  | fore200e->bus->write(fore200e_rx_buf_size[ scheme ][ magn ], &bs_spec->buffer_size); | 
|  | fore200e->bus->write(pool_size,                              &bs_spec->pool_size); | 
|  | fore200e->bus->write(supply_blksize,                         &bs_spec->supply_blksize); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_initialize(struct fore200e* fore200e) | 
|  | { | 
|  | struct cp_queues __iomem * cpq; | 
|  | int               ok, scheme, magn; | 
|  |  | 
|  | DPRINTK(2, "device %s being initialized\n", fore200e->name); | 
|  |  | 
|  | init_MUTEX(&fore200e->rate_sf); | 
|  | spin_lock_init(&fore200e->q_lock); | 
|  |  | 
|  | cpq = fore200e->cp_queues = fore200e->virt_base + FORE200E_CP_QUEUES_OFFSET; | 
|  |  | 
|  | /* enable cp to host interrupts */ | 
|  | fore200e->bus->write(1, &cpq->imask); | 
|  |  | 
|  | if (fore200e->bus->irq_enable) | 
|  | fore200e->bus->irq_enable(fore200e); | 
|  |  | 
|  | fore200e->bus->write(NBR_CONNECT, &cpq->init.num_connect); | 
|  |  | 
|  | fore200e->bus->write(QUEUE_SIZE_CMD, &cpq->init.cmd_queue_len); | 
|  | fore200e->bus->write(QUEUE_SIZE_RX,  &cpq->init.rx_queue_len); | 
|  | fore200e->bus->write(QUEUE_SIZE_TX,  &cpq->init.tx_queue_len); | 
|  |  | 
|  | fore200e->bus->write(RSD_EXTENSION,  &cpq->init.rsd_extension); | 
|  | fore200e->bus->write(TSD_EXTENSION,  &cpq->init.tsd_extension); | 
|  |  | 
|  | for (scheme = 0; scheme < BUFFER_SCHEME_NBR; scheme++) | 
|  | for (magn = 0; magn < BUFFER_MAGN_NBR; magn++) | 
|  | fore200e_param_bs_queue(fore200e, scheme, magn, | 
|  | QUEUE_SIZE_BS, | 
|  | fore200e_rx_buf_nbr[ scheme ][ magn ], | 
|  | RBD_BLK_SIZE); | 
|  |  | 
|  | /* issue the initialize command */ | 
|  | fore200e->bus->write(STATUS_PENDING,    &cpq->init.status); | 
|  | fore200e->bus->write(OPCODE_INITIALIZE, &cpq->init.opcode); | 
|  |  | 
|  | ok = fore200e_io_poll(fore200e, &cpq->init.status, STATUS_COMPLETE, 3000); | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "device %s initialization failed\n", fore200e->name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | printk(FORE200E "device %s initialized\n", fore200e->name); | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_INITIALIZE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __devinit | 
|  | fore200e_monitor_putc(struct fore200e* fore200e, char c) | 
|  | { | 
|  | struct cp_monitor __iomem * monitor = fore200e->cp_monitor; | 
|  |  | 
|  | #if 0 | 
|  | printk("%c", c); | 
|  | #endif | 
|  | fore200e->bus->write(((u32) c) | FORE200E_CP_MONITOR_UART_AVAIL, &monitor->soft_uart.send); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_monitor_getc(struct fore200e* fore200e) | 
|  | { | 
|  | struct cp_monitor __iomem * monitor = fore200e->cp_monitor; | 
|  | unsigned long      timeout = jiffies + msecs_to_jiffies(50); | 
|  | int                c; | 
|  |  | 
|  | while (time_before(jiffies, timeout)) { | 
|  |  | 
|  | c = (int) fore200e->bus->read(&monitor->soft_uart.recv); | 
|  |  | 
|  | if (c & FORE200E_CP_MONITOR_UART_AVAIL) { | 
|  |  | 
|  | fore200e->bus->write(FORE200E_CP_MONITOR_UART_FREE, &monitor->soft_uart.recv); | 
|  | #if 0 | 
|  | printk("%c", c & 0xFF); | 
|  | #endif | 
|  | return c & 0xFF; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __devinit | 
|  | fore200e_monitor_puts(struct fore200e* fore200e, char* str) | 
|  | { | 
|  | while (*str) { | 
|  |  | 
|  | /* the i960 monitor doesn't accept any new character if it has something to say */ | 
|  | while (fore200e_monitor_getc(fore200e) >= 0); | 
|  |  | 
|  | fore200e_monitor_putc(fore200e, *str++); | 
|  | } | 
|  |  | 
|  | while (fore200e_monitor_getc(fore200e) >= 0); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_start_fw(struct fore200e* fore200e) | 
|  | { | 
|  | int               ok; | 
|  | char              cmd[ 48 ]; | 
|  | struct fw_header* fw_header = (struct fw_header*) fore200e->bus->fw_data; | 
|  |  | 
|  | DPRINTK(2, "device %s firmware being started\n", fore200e->name); | 
|  |  | 
|  | #if defined(__sparc_v9__) | 
|  | /* reported to be required by SBA cards on some sparc64 hosts */ | 
|  | fore200e_spin(100); | 
|  | #endif | 
|  |  | 
|  | sprintf(cmd, "\rgo %x\r", le32_to_cpu(fw_header->start_offset)); | 
|  |  | 
|  | fore200e_monitor_puts(fore200e, cmd); | 
|  |  | 
|  | ok = fore200e_io_poll(fore200e, &fore200e->cp_monitor->bstat, BSTAT_CP_RUNNING, 1000); | 
|  | if (ok == 0) { | 
|  | printk(FORE200E "device %s firmware didn't start\n", fore200e->name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | printk(FORE200E "device %s firmware started\n", fore200e->name); | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_START_FW; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_load_fw(struct fore200e* fore200e) | 
|  | { | 
|  | u32* fw_data = (u32*) fore200e->bus->fw_data; | 
|  | u32  fw_size = (u32) *fore200e->bus->fw_size / sizeof(u32); | 
|  |  | 
|  | struct fw_header* fw_header = (struct fw_header*) fw_data; | 
|  |  | 
|  | u32 __iomem *load_addr = fore200e->virt_base + le32_to_cpu(fw_header->load_offset); | 
|  |  | 
|  | DPRINTK(2, "device %s firmware being loaded at 0x%p (%d words)\n", | 
|  | fore200e->name, load_addr, fw_size); | 
|  |  | 
|  | if (le32_to_cpu(fw_header->magic) != FW_HEADER_MAGIC) { | 
|  | printk(FORE200E "corrupted %s firmware image\n", fore200e->bus->model_name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | for (; fw_size--; fw_data++, load_addr++) | 
|  | fore200e->bus->write(le32_to_cpu(*fw_data), load_addr); | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_LOAD_FW; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_register(struct fore200e* fore200e) | 
|  | { | 
|  | struct atm_dev* atm_dev; | 
|  |  | 
|  | DPRINTK(2, "device %s being registered\n", fore200e->name); | 
|  |  | 
|  | atm_dev = atm_dev_register(fore200e->bus->proc_name, &fore200e_ops, -1, | 
|  | NULL); | 
|  | if (atm_dev == NULL) { | 
|  | printk(FORE200E "unable to register device %s\n", fore200e->name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | atm_dev->dev_data = fore200e; | 
|  | fore200e->atm_dev = atm_dev; | 
|  |  | 
|  | atm_dev->ci_range.vpi_bits = FORE200E_VPI_BITS; | 
|  | atm_dev->ci_range.vci_bits = FORE200E_VCI_BITS; | 
|  |  | 
|  | fore200e->available_cell_rate = ATM_OC3_PCR; | 
|  |  | 
|  | fore200e->state = FORE200E_STATE_REGISTER; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_init(struct fore200e* fore200e) | 
|  | { | 
|  | if (fore200e_register(fore200e) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e->bus->configure(fore200e) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e->bus->map(fore200e) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e_reset(fore200e, 1) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e_load_fw(fore200e) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e_start_fw(fore200e) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e_initialize(fore200e) < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (fore200e_init_cmd_queue(fore200e) < 0) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (fore200e_init_tx_queue(fore200e) < 0) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (fore200e_init_rx_queue(fore200e) < 0) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (fore200e_init_bs_queue(fore200e) < 0) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (fore200e_alloc_rx_buf(fore200e) < 0) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (fore200e_get_esi(fore200e) < 0) | 
|  | return -EIO; | 
|  |  | 
|  | if (fore200e_irq_request(fore200e) < 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | fore200e_supply(fore200e); | 
|  |  | 
|  | /* all done, board initialization is now complete */ | 
|  | fore200e->state = FORE200E_STATE_COMPLETE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __devinit | 
|  | fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) | 
|  | { | 
|  | const struct fore200e_bus* bus = (struct fore200e_bus*) pci_ent->driver_data; | 
|  | struct fore200e* fore200e; | 
|  | int err = 0; | 
|  | static int index = 0; | 
|  |  | 
|  | if (pci_enable_device(pci_dev)) { | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | fore200e = fore200e_kmalloc(sizeof(struct fore200e), GFP_KERNEL); | 
|  | if (fore200e == NULL) { | 
|  | err = -ENOMEM; | 
|  | goto out_disable; | 
|  | } | 
|  |  | 
|  | fore200e->bus       = bus; | 
|  | fore200e->bus_dev   = pci_dev; | 
|  | fore200e->irq       = pci_dev->irq; | 
|  | fore200e->phys_base = pci_resource_start(pci_dev, 0); | 
|  |  | 
|  | sprintf(fore200e->name, "%s-%d", bus->model_name, index - 1); | 
|  |  | 
|  | pci_set_master(pci_dev); | 
|  |  | 
|  | printk(FORE200E "device %s found at 0x%lx, IRQ %s\n", | 
|  | fore200e->bus->model_name, | 
|  | fore200e->phys_base, fore200e_irq_itoa(fore200e->irq)); | 
|  |  | 
|  | sprintf(fore200e->name, "%s-%d", bus->model_name, index); | 
|  |  | 
|  | err = fore200e_init(fore200e); | 
|  | if (err < 0) { | 
|  | fore200e_shutdown(fore200e); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | ++index; | 
|  | pci_set_drvdata(pci_dev, fore200e); | 
|  |  | 
|  | out: | 
|  | return err; | 
|  |  | 
|  | out_free: | 
|  | kfree(fore200e); | 
|  | out_disable: | 
|  | pci_disable_device(pci_dev); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __devexit fore200e_pca_remove_one(struct pci_dev *pci_dev) | 
|  | { | 
|  | struct fore200e *fore200e; | 
|  |  | 
|  | fore200e = pci_get_drvdata(pci_dev); | 
|  |  | 
|  | fore200e_shutdown(fore200e); | 
|  | kfree(fore200e); | 
|  | pci_disable_device(pci_dev); | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_PCA | 
|  | static struct pci_device_id fore200e_pca_tbl[] = { | 
|  | { PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID, | 
|  | 0, 0, (unsigned long) &fore200e_bus[0] }, | 
|  | { 0, } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, fore200e_pca_tbl); | 
|  |  | 
|  | static struct pci_driver fore200e_pca_driver = { | 
|  | .name =     "fore_200e", | 
|  | .probe =    fore200e_pca_detect, | 
|  | .remove =   __devexit_p(fore200e_pca_remove_one), | 
|  | .id_table = fore200e_pca_tbl, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static int __init | 
|  | fore200e_module_init(void) | 
|  | { | 
|  | const struct fore200e_bus* bus; | 
|  | struct       fore200e*     fore200e; | 
|  | int                        index; | 
|  |  | 
|  | printk(FORE200E "FORE Systems 200E-series ATM driver - version " FORE200E_VERSION "\n"); | 
|  |  | 
|  | /* for each configured bus interface */ | 
|  | for (bus = fore200e_bus; bus->model_name; bus++) { | 
|  |  | 
|  | /* detect all boards present on that bus */ | 
|  | for (index = 0; bus->detect && (fore200e = bus->detect(bus, index)); index++) { | 
|  |  | 
|  | printk(FORE200E "device %s found at 0x%lx, IRQ %s\n", | 
|  | fore200e->bus->model_name, | 
|  | fore200e->phys_base, fore200e_irq_itoa(fore200e->irq)); | 
|  |  | 
|  | sprintf(fore200e->name, "%s-%d", bus->model_name, index); | 
|  |  | 
|  | if (fore200e_init(fore200e) < 0) { | 
|  |  | 
|  | fore200e_shutdown(fore200e); | 
|  | break; | 
|  | } | 
|  |  | 
|  | list_add(&fore200e->entry, &fore200e_boards); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_PCA | 
|  | if (!pci_register_driver(&fore200e_pca_driver)) | 
|  | return 0; | 
|  | #endif | 
|  |  | 
|  | if (!list_empty(&fore200e_boards)) | 
|  | return 0; | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void __exit | 
|  | fore200e_module_cleanup(void) | 
|  | { | 
|  | struct fore200e *fore200e, *next; | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_PCA | 
|  | pci_unregister_driver(&fore200e_pca_driver); | 
|  | #endif | 
|  |  | 
|  | list_for_each_entry_safe(fore200e, next, &fore200e_boards, entry) { | 
|  | fore200e_shutdown(fore200e); | 
|  | kfree(fore200e); | 
|  | } | 
|  | DPRINTK(1, "module being removed\n"); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | fore200e_proc_read(struct atm_dev *dev, loff_t* pos, char* page) | 
|  | { | 
|  | struct fore200e*     fore200e  = FORE200E_DEV(dev); | 
|  | struct fore200e_vcc* fore200e_vcc; | 
|  | struct atm_vcc*      vcc; | 
|  | int                  i, len, left = *pos; | 
|  | unsigned long        flags; | 
|  |  | 
|  | if (!left--) { | 
|  |  | 
|  | if (fore200e_getstats(fore200e) < 0) | 
|  | return -EIO; | 
|  |  | 
|  | len = sprintf(page,"\n" | 
|  | " device:\n" | 
|  | "   internal name:\t\t%s\n", fore200e->name); | 
|  |  | 
|  | /* print bus-specific information */ | 
|  | if (fore200e->bus->proc_read) | 
|  | len += fore200e->bus->proc_read(fore200e, page + len); | 
|  |  | 
|  | len += sprintf(page + len, | 
|  | "   interrupt line:\t\t%s\n" | 
|  | "   physical base address:\t0x%p\n" | 
|  | "   virtual base address:\t0x%p\n" | 
|  | "   factory address (ESI):\t%02x:%02x:%02x:%02x:%02x:%02x\n" | 
|  | "   board serial number:\t\t%d\n\n", | 
|  | fore200e_irq_itoa(fore200e->irq), | 
|  | (void*)fore200e->phys_base, | 
|  | fore200e->virt_base, | 
|  | fore200e->esi[0], fore200e->esi[1], fore200e->esi[2], | 
|  | fore200e->esi[3], fore200e->esi[4], fore200e->esi[5], | 
|  | fore200e->esi[4] * 256 + fore200e->esi[5]); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page, | 
|  | "   free small bufs, scheme 1:\t%d\n" | 
|  | "   free large bufs, scheme 1:\t%d\n" | 
|  | "   free small bufs, scheme 2:\t%d\n" | 
|  | "   free large bufs, scheme 2:\t%d\n", | 
|  | fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_SMALL ].freebuf_count, | 
|  | fore200e->host_bsq[ BUFFER_SCHEME_ONE ][ BUFFER_MAGN_LARGE ].freebuf_count, | 
|  | fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_SMALL ].freebuf_count, | 
|  | fore200e->host_bsq[ BUFFER_SCHEME_TWO ][ BUFFER_MAGN_LARGE ].freebuf_count); | 
|  |  | 
|  | if (!left--) { | 
|  | u32 hb = fore200e->bus->read(&fore200e->cp_queues->heartbeat); | 
|  |  | 
|  | len = sprintf(page,"\n\n" | 
|  | " cell processor:\n" | 
|  | "   heartbeat state:\t\t"); | 
|  |  | 
|  | if (hb >> 16 != 0xDEAD) | 
|  | len += sprintf(page + len, "0x%08x\n", hb); | 
|  | else | 
|  | len += sprintf(page + len, "*** FATAL ERROR %04x ***\n", hb & 0xFFFF); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | if (!left--) { | 
|  | static const char* media_name[] = { | 
|  | "unshielded twisted pair", | 
|  | "multimode optical fiber ST", | 
|  | "multimode optical fiber SC", | 
|  | "single-mode optical fiber ST", | 
|  | "single-mode optical fiber SC", | 
|  | "unknown" | 
|  | }; | 
|  |  | 
|  | static const char* oc3_mode[] = { | 
|  | "normal operation", | 
|  | "diagnostic loopback", | 
|  | "line loopback", | 
|  | "unknown" | 
|  | }; | 
|  |  | 
|  | u32 fw_release     = fore200e->bus->read(&fore200e->cp_queues->fw_release); | 
|  | u32 mon960_release = fore200e->bus->read(&fore200e->cp_queues->mon960_release); | 
|  | u32 oc3_revision   = fore200e->bus->read(&fore200e->cp_queues->oc3_revision); | 
|  | u32 media_index    = FORE200E_MEDIA_INDEX(fore200e->bus->read(&fore200e->cp_queues->media_type)); | 
|  | u32 oc3_index; | 
|  |  | 
|  | if ((media_index < 0) || (media_index > 4)) | 
|  | media_index = 5; | 
|  |  | 
|  | switch (fore200e->loop_mode) { | 
|  | case ATM_LM_NONE:    oc3_index = 0; | 
|  | break; | 
|  | case ATM_LM_LOC_PHY: oc3_index = 1; | 
|  | break; | 
|  | case ATM_LM_RMT_PHY: oc3_index = 2; | 
|  | break; | 
|  | default:             oc3_index = 3; | 
|  | } | 
|  |  | 
|  | return sprintf(page, | 
|  | "   firmware release:\t\t%d.%d.%d\n" | 
|  | "   monitor release:\t\t%d.%d\n" | 
|  | "   media type:\t\t\t%s\n" | 
|  | "   OC-3 revision:\t\t0x%x\n" | 
|  | "   OC-3 mode:\t\t\t%s", | 
|  | fw_release >> 16, fw_release << 16 >> 24,  fw_release << 24 >> 24, | 
|  | mon960_release >> 16, mon960_release << 16 >> 16, | 
|  | media_name[ media_index ], | 
|  | oc3_revision, | 
|  | oc3_mode[ oc3_index ]); | 
|  | } | 
|  |  | 
|  | if (!left--) { | 
|  | struct cp_monitor __iomem * cp_monitor = fore200e->cp_monitor; | 
|  |  | 
|  | return sprintf(page, | 
|  | "\n\n" | 
|  | " monitor:\n" | 
|  | "   version number:\t\t%d\n" | 
|  | "   boot status word:\t\t0x%08x\n", | 
|  | fore200e->bus->read(&cp_monitor->mon_version), | 
|  | fore200e->bus->read(&cp_monitor->bstat)); | 
|  | } | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page, | 
|  | "\n" | 
|  | " device statistics:\n" | 
|  | "  4b5b:\n" | 
|  | "     crc_header_errors:\t\t%10u\n" | 
|  | "     framing_errors:\t\t%10u\n", | 
|  | fore200e_swap(fore200e->stats->phy.crc_header_errors), | 
|  | fore200e_swap(fore200e->stats->phy.framing_errors)); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page, "\n" | 
|  | "  OC-3:\n" | 
|  | "     section_bip8_errors:\t%10u\n" | 
|  | "     path_bip8_errors:\t\t%10u\n" | 
|  | "     line_bip24_errors:\t\t%10u\n" | 
|  | "     line_febe_errors:\t\t%10u\n" | 
|  | "     path_febe_errors:\t\t%10u\n" | 
|  | "     corr_hcs_errors:\t\t%10u\n" | 
|  | "     ucorr_hcs_errors:\t\t%10u\n", | 
|  | fore200e_swap(fore200e->stats->oc3.section_bip8_errors), | 
|  | fore200e_swap(fore200e->stats->oc3.path_bip8_errors), | 
|  | fore200e_swap(fore200e->stats->oc3.line_bip24_errors), | 
|  | fore200e_swap(fore200e->stats->oc3.line_febe_errors), | 
|  | fore200e_swap(fore200e->stats->oc3.path_febe_errors), | 
|  | fore200e_swap(fore200e->stats->oc3.corr_hcs_errors), | 
|  | fore200e_swap(fore200e->stats->oc3.ucorr_hcs_errors)); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page,"\n" | 
|  | "   ATM:\t\t\t\t     cells\n" | 
|  | "     TX:\t\t\t%10u\n" | 
|  | "     RX:\t\t\t%10u\n" | 
|  | "     vpi out of range:\t\t%10u\n" | 
|  | "     vpi no conn:\t\t%10u\n" | 
|  | "     vci out of range:\t\t%10u\n" | 
|  | "     vci no conn:\t\t%10u\n", | 
|  | fore200e_swap(fore200e->stats->atm.cells_transmitted), | 
|  | fore200e_swap(fore200e->stats->atm.cells_received), | 
|  | fore200e_swap(fore200e->stats->atm.vpi_bad_range), | 
|  | fore200e_swap(fore200e->stats->atm.vpi_no_conn), | 
|  | fore200e_swap(fore200e->stats->atm.vci_bad_range), | 
|  | fore200e_swap(fore200e->stats->atm.vci_no_conn)); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page,"\n" | 
|  | "   AAL0:\t\t\t     cells\n" | 
|  | "     TX:\t\t\t%10u\n" | 
|  | "     RX:\t\t\t%10u\n" | 
|  | "     dropped:\t\t\t%10u\n", | 
|  | fore200e_swap(fore200e->stats->aal0.cells_transmitted), | 
|  | fore200e_swap(fore200e->stats->aal0.cells_received), | 
|  | fore200e_swap(fore200e->stats->aal0.cells_dropped)); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page,"\n" | 
|  | "   AAL3/4:\n" | 
|  | "     SAR sublayer:\t\t     cells\n" | 
|  | "       TX:\t\t\t%10u\n" | 
|  | "       RX:\t\t\t%10u\n" | 
|  | "       dropped:\t\t\t%10u\n" | 
|  | "       CRC errors:\t\t%10u\n" | 
|  | "       protocol errors:\t\t%10u\n\n" | 
|  | "     CS  sublayer:\t\t      PDUs\n" | 
|  | "       TX:\t\t\t%10u\n" | 
|  | "       RX:\t\t\t%10u\n" | 
|  | "       dropped:\t\t\t%10u\n" | 
|  | "       protocol errors:\t\t%10u\n", | 
|  | fore200e_swap(fore200e->stats->aal34.cells_transmitted), | 
|  | fore200e_swap(fore200e->stats->aal34.cells_received), | 
|  | fore200e_swap(fore200e->stats->aal34.cells_dropped), | 
|  | fore200e_swap(fore200e->stats->aal34.cells_crc_errors), | 
|  | fore200e_swap(fore200e->stats->aal34.cells_protocol_errors), | 
|  | fore200e_swap(fore200e->stats->aal34.cspdus_transmitted), | 
|  | fore200e_swap(fore200e->stats->aal34.cspdus_received), | 
|  | fore200e_swap(fore200e->stats->aal34.cspdus_dropped), | 
|  | fore200e_swap(fore200e->stats->aal34.cspdus_protocol_errors)); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page,"\n" | 
|  | "   AAL5:\n" | 
|  | "     SAR sublayer:\t\t     cells\n" | 
|  | "       TX:\t\t\t%10u\n" | 
|  | "       RX:\t\t\t%10u\n" | 
|  | "       dropped:\t\t\t%10u\n" | 
|  | "       congestions:\t\t%10u\n\n" | 
|  | "     CS  sublayer:\t\t      PDUs\n" | 
|  | "       TX:\t\t\t%10u\n" | 
|  | "       RX:\t\t\t%10u\n" | 
|  | "       dropped:\t\t\t%10u\n" | 
|  | "       CRC errors:\t\t%10u\n" | 
|  | "       protocol errors:\t\t%10u\n", | 
|  | fore200e_swap(fore200e->stats->aal5.cells_transmitted), | 
|  | fore200e_swap(fore200e->stats->aal5.cells_received), | 
|  | fore200e_swap(fore200e->stats->aal5.cells_dropped), | 
|  | fore200e_swap(fore200e->stats->aal5.congestion_experienced), | 
|  | fore200e_swap(fore200e->stats->aal5.cspdus_transmitted), | 
|  | fore200e_swap(fore200e->stats->aal5.cspdus_received), | 
|  | fore200e_swap(fore200e->stats->aal5.cspdus_dropped), | 
|  | fore200e_swap(fore200e->stats->aal5.cspdus_crc_errors), | 
|  | fore200e_swap(fore200e->stats->aal5.cspdus_protocol_errors)); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page,"\n" | 
|  | "   AUX:\t\t       allocation failures\n" | 
|  | "     small b1:\t\t\t%10u\n" | 
|  | "     large b1:\t\t\t%10u\n" | 
|  | "     small b2:\t\t\t%10u\n" | 
|  | "     large b2:\t\t\t%10u\n" | 
|  | "     RX PDUs:\t\t\t%10u\n" | 
|  | "     TX PDUs:\t\t\t%10lu\n", | 
|  | fore200e_swap(fore200e->stats->aux.small_b1_failed), | 
|  | fore200e_swap(fore200e->stats->aux.large_b1_failed), | 
|  | fore200e_swap(fore200e->stats->aux.small_b2_failed), | 
|  | fore200e_swap(fore200e->stats->aux.large_b2_failed), | 
|  | fore200e_swap(fore200e->stats->aux.rpd_alloc_failed), | 
|  | fore200e->tx_sat); | 
|  |  | 
|  | if (!left--) | 
|  | return sprintf(page,"\n" | 
|  | " receive carrier:\t\t\t%s\n", | 
|  | fore200e->stats->aux.receive_carrier ? "ON" : "OFF!"); | 
|  |  | 
|  | if (!left--) { | 
|  | return sprintf(page,"\n" | 
|  | " VCCs:\n  address   VPI VCI   AAL " | 
|  | "TX PDUs   TX min/max size  RX PDUs   RX min/max size\n"); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < NBR_CONNECT; i++) { | 
|  |  | 
|  | vcc = fore200e->vc_map[i].vcc; | 
|  |  | 
|  | if (vcc == NULL) | 
|  | continue; | 
|  |  | 
|  | spin_lock_irqsave(&fore200e->q_lock, flags); | 
|  |  | 
|  | if (vcc && test_bit(ATM_VF_READY, &vcc->flags) && !left--) { | 
|  |  | 
|  | fore200e_vcc = FORE200E_VCC(vcc); | 
|  | ASSERT(fore200e_vcc); | 
|  |  | 
|  | len = sprintf(page, | 
|  | "  %08x  %03d %05d %1d   %09lu %05d/%05d      %09lu %05d/%05d\n", | 
|  | (u32)(unsigned long)vcc, | 
|  | vcc->vpi, vcc->vci, fore200e_atm2fore_aal(vcc->qos.aal), | 
|  | fore200e_vcc->tx_pdu, | 
|  | fore200e_vcc->tx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->tx_min_pdu, | 
|  | fore200e_vcc->tx_max_pdu, | 
|  | fore200e_vcc->rx_pdu, | 
|  | fore200e_vcc->rx_min_pdu > 0xFFFF ? 0 : fore200e_vcc->rx_min_pdu, | 
|  | fore200e_vcc->rx_max_pdu); | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&fore200e->q_lock, flags); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | module_init(fore200e_module_init); | 
|  | module_exit(fore200e_module_cleanup); | 
|  |  | 
|  |  | 
|  | static const struct atmdev_ops fore200e_ops = | 
|  | { | 
|  | .open       = fore200e_open, | 
|  | .close      = fore200e_close, | 
|  | .ioctl      = fore200e_ioctl, | 
|  | .getsockopt = fore200e_getsockopt, | 
|  | .setsockopt = fore200e_setsockopt, | 
|  | .send       = fore200e_send, | 
|  | .change_qos = fore200e_change_qos, | 
|  | .proc_read  = fore200e_proc_read, | 
|  | .owner      = THIS_MODULE | 
|  | }; | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_ATM_FORE200E_PCA | 
|  | extern const unsigned char _fore200e_pca_fw_data[]; | 
|  | extern const unsigned int  _fore200e_pca_fw_size; | 
|  | #endif | 
|  | #ifdef CONFIG_ATM_FORE200E_SBA | 
|  | extern const unsigned char _fore200e_sba_fw_data[]; | 
|  | extern const unsigned int  _fore200e_sba_fw_size; | 
|  | #endif | 
|  |  | 
|  | static const struct fore200e_bus fore200e_bus[] = { | 
|  | #ifdef CONFIG_ATM_FORE200E_PCA | 
|  | { "PCA-200E", "pca200e", 32, 4, 32, | 
|  | _fore200e_pca_fw_data, &_fore200e_pca_fw_size, | 
|  | fore200e_pca_read, | 
|  | fore200e_pca_write, | 
|  | fore200e_pca_dma_map, | 
|  | fore200e_pca_dma_unmap, | 
|  | fore200e_pca_dma_sync_for_cpu, | 
|  | fore200e_pca_dma_sync_for_device, | 
|  | fore200e_pca_dma_chunk_alloc, | 
|  | fore200e_pca_dma_chunk_free, | 
|  | NULL, | 
|  | fore200e_pca_configure, | 
|  | fore200e_pca_map, | 
|  | fore200e_pca_reset, | 
|  | fore200e_pca_prom_read, | 
|  | fore200e_pca_unmap, | 
|  | NULL, | 
|  | fore200e_pca_irq_check, | 
|  | fore200e_pca_irq_ack, | 
|  | fore200e_pca_proc_read, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_ATM_FORE200E_SBA | 
|  | { "SBA-200E", "sba200e", 32, 64, 32, | 
|  | _fore200e_sba_fw_data, &_fore200e_sba_fw_size, | 
|  | fore200e_sba_read, | 
|  | fore200e_sba_write, | 
|  | fore200e_sba_dma_map, | 
|  | fore200e_sba_dma_unmap, | 
|  | fore200e_sba_dma_sync_for_cpu, | 
|  | fore200e_sba_dma_sync_for_device, | 
|  | fore200e_sba_dma_chunk_alloc, | 
|  | fore200e_sba_dma_chunk_free, | 
|  | fore200e_sba_detect, | 
|  | fore200e_sba_configure, | 
|  | fore200e_sba_map, | 
|  | fore200e_sba_reset, | 
|  | fore200e_sba_prom_read, | 
|  | fore200e_sba_unmap, | 
|  | fore200e_sba_irq_enable, | 
|  | fore200e_sba_irq_check, | 
|  | fore200e_sba_irq_ack, | 
|  | fore200e_sba_proc_read, | 
|  | }, | 
|  | #endif | 
|  | {} | 
|  | }; | 
|  |  | 
|  | #ifdef MODULE_LICENSE | 
|  | MODULE_LICENSE("GPL"); | 
|  | #endif |