| /* |
| * Copyright (c) 2006 QLogic, Inc. All rights reserved. |
| * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <rdma/ib_smi.h> |
| |
| #include "ipath_kernel.h" |
| #include "ipath_verbs.h" |
| #include "ipath_common.h" |
| |
| #define IB_SMP_UNSUP_VERSION __constant_htons(0x0004) |
| #define IB_SMP_UNSUP_METHOD __constant_htons(0x0008) |
| #define IB_SMP_UNSUP_METH_ATTR __constant_htons(0x000C) |
| #define IB_SMP_INVALID_FIELD __constant_htons(0x001C) |
| |
| static int reply(struct ib_smp *smp) |
| { |
| /* |
| * The verbs framework will handle the directed/LID route |
| * packet changes. |
| */ |
| smp->method = IB_MGMT_METHOD_GET_RESP; |
| if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) |
| smp->status |= IB_SMP_DIRECTION; |
| return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY; |
| } |
| |
| static int recv_subn_get_nodedescription(struct ib_smp *smp, |
| struct ib_device *ibdev) |
| { |
| if (smp->attr_mod) |
| smp->status |= IB_SMP_INVALID_FIELD; |
| |
| strncpy(smp->data, ibdev->node_desc, sizeof(smp->data)); |
| |
| return reply(smp); |
| } |
| |
| struct nodeinfo { |
| u8 base_version; |
| u8 class_version; |
| u8 node_type; |
| u8 num_ports; |
| __be64 sys_guid; |
| __be64 node_guid; |
| __be64 port_guid; |
| __be16 partition_cap; |
| __be16 device_id; |
| __be32 revision; |
| u8 local_port_num; |
| u8 vendor_id[3]; |
| } __attribute__ ((packed)); |
| |
| static int recv_subn_get_nodeinfo(struct ib_smp *smp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct nodeinfo *nip = (struct nodeinfo *)&smp->data; |
| struct ipath_devdata *dd = to_idev(ibdev)->dd; |
| u32 vendor, majrev, minrev; |
| |
| /* GUID 0 is illegal */ |
| if (smp->attr_mod || (dd->ipath_guid == 0)) |
| smp->status |= IB_SMP_INVALID_FIELD; |
| |
| nip->base_version = 1; |
| nip->class_version = 1; |
| nip->node_type = 1; /* channel adapter */ |
| /* |
| * XXX The num_ports value will need a layer function to get |
| * the value if we ever have more than one IB port on a chip. |
| * We will also need to get the GUID for the port. |
| */ |
| nip->num_ports = ibdev->phys_port_cnt; |
| /* This is already in network order */ |
| nip->sys_guid = to_idev(ibdev)->sys_image_guid; |
| nip->node_guid = dd->ipath_guid; |
| nip->port_guid = nip->sys_guid; |
| nip->partition_cap = cpu_to_be16(ipath_get_npkeys(dd)); |
| nip->device_id = cpu_to_be16(dd->ipath_deviceid); |
| majrev = dd->ipath_majrev; |
| minrev = dd->ipath_minrev; |
| nip->revision = cpu_to_be32((majrev << 16) | minrev); |
| nip->local_port_num = port; |
| vendor = dd->ipath_vendorid; |
| nip->vendor_id[0] = 0; |
| nip->vendor_id[1] = vendor >> 8; |
| nip->vendor_id[2] = vendor; |
| |
| return reply(smp); |
| } |
| |
| static int recv_subn_get_guidinfo(struct ib_smp *smp, |
| struct ib_device *ibdev) |
| { |
| u32 startgx = 8 * be32_to_cpu(smp->attr_mod); |
| __be64 *p = (__be64 *) smp->data; |
| |
| /* 32 blocks of 8 64-bit GUIDs per block */ |
| |
| memset(smp->data, 0, sizeof(smp->data)); |
| |
| /* |
| * We only support one GUID for now. If this changes, the |
| * portinfo.guid_cap field needs to be updated too. |
| */ |
| if (startgx == 0) { |
| __be64 g = to_idev(ibdev)->dd->ipath_guid; |
| if (g == 0) |
| /* GUID 0 is illegal */ |
| smp->status |= IB_SMP_INVALID_FIELD; |
| else |
| /* The first is a copy of the read-only HW GUID. */ |
| *p = g; |
| } else |
| smp->status |= IB_SMP_INVALID_FIELD; |
| |
| return reply(smp); |
| } |
| |
| |
| static int get_overrunthreshold(struct ipath_devdata *dd) |
| { |
| return (dd->ipath_ibcctrl >> |
| INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) & |
| INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK; |
| } |
| |
| /** |
| * set_overrunthreshold - set the overrun threshold |
| * @dd: the infinipath device |
| * @n: the new threshold |
| * |
| * Note that this will only take effect when the link state changes. |
| */ |
| static int set_overrunthreshold(struct ipath_devdata *dd, unsigned n) |
| { |
| unsigned v; |
| |
| v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) & |
| INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK; |
| if (v != n) { |
| dd->ipath_ibcctrl &= |
| ~(INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK << |
| INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT); |
| dd->ipath_ibcctrl |= |
| (u64) n << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT; |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, |
| dd->ipath_ibcctrl); |
| } |
| return 0; |
| } |
| |
| static int get_phyerrthreshold(struct ipath_devdata *dd) |
| { |
| return (dd->ipath_ibcctrl >> |
| INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) & |
| INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK; |
| } |
| |
| /** |
| * set_phyerrthreshold - set the physical error threshold |
| * @dd: the infinipath device |
| * @n: the new threshold |
| * |
| * Note that this will only take effect when the link state changes. |
| */ |
| static int set_phyerrthreshold(struct ipath_devdata *dd, unsigned n) |
| { |
| unsigned v; |
| |
| v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) & |
| INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK; |
| if (v != n) { |
| dd->ipath_ibcctrl &= |
| ~(INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK << |
| INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT); |
| dd->ipath_ibcctrl |= |
| (u64) n << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT; |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, |
| dd->ipath_ibcctrl); |
| } |
| return 0; |
| } |
| |
| /** |
| * get_linkdowndefaultstate - get the default linkdown state |
| * @dd: the infinipath device |
| * |
| * Returns zero if the default is POLL, 1 if the default is SLEEP. |
| */ |
| static int get_linkdowndefaultstate(struct ipath_devdata *dd) |
| { |
| return !!(dd->ipath_ibcctrl & INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE); |
| } |
| |
| static int recv_subn_get_portinfo(struct ib_smp *smp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ipath_ibdev *dev; |
| struct ib_port_info *pip = (struct ib_port_info *)smp->data; |
| u16 lid; |
| u8 ibcstat; |
| u8 mtu; |
| int ret; |
| |
| if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt) { |
| smp->status |= IB_SMP_INVALID_FIELD; |
| ret = reply(smp); |
| goto bail; |
| } |
| |
| dev = to_idev(ibdev); |
| |
| /* Clear all fields. Only set the non-zero fields. */ |
| memset(smp->data, 0, sizeof(smp->data)); |
| |
| /* Only return the mkey if the protection field allows it. */ |
| if (smp->method == IB_MGMT_METHOD_SET || dev->mkey == smp->mkey || |
| (dev->mkeyprot_resv_lmc >> 6) == 0) |
| pip->mkey = dev->mkey; |
| pip->gid_prefix = dev->gid_prefix; |
| lid = dev->dd->ipath_lid; |
| pip->lid = lid ? cpu_to_be16(lid) : IB_LID_PERMISSIVE; |
| pip->sm_lid = cpu_to_be16(dev->sm_lid); |
| pip->cap_mask = cpu_to_be32(dev->port_cap_flags); |
| /* pip->diag_code; */ |
| pip->mkey_lease_period = cpu_to_be16(dev->mkey_lease_period); |
| pip->local_port_num = port; |
| pip->link_width_enabled = dev->link_width_enabled; |
| pip->link_width_supported = 3; /* 1x or 4x */ |
| pip->link_width_active = 2; /* 4x */ |
| pip->linkspeed_portstate = 0x10; /* 2.5Gbps */ |
| ibcstat = dev->dd->ipath_lastibcstat; |
| pip->linkspeed_portstate |= ((ibcstat >> 4) & 0x3) + 1; |
| pip->portphysstate_linkdown = |
| (ipath_cvt_physportstate[ibcstat & 0xf] << 4) | |
| (get_linkdowndefaultstate(dev->dd) ? 1 : 2); |
| pip->mkeyprot_resv_lmc = dev->mkeyprot_resv_lmc; |
| pip->linkspeedactive_enabled = 0x11; /* 2.5Gbps, 2.5Gbps */ |
| switch (dev->dd->ipath_ibmtu) { |
| case 4096: |
| mtu = IB_MTU_4096; |
| break; |
| case 2048: |
| mtu = IB_MTU_2048; |
| break; |
| case 1024: |
| mtu = IB_MTU_1024; |
| break; |
| case 512: |
| mtu = IB_MTU_512; |
| break; |
| case 256: |
| mtu = IB_MTU_256; |
| break; |
| default: /* oops, something is wrong */ |
| mtu = IB_MTU_2048; |
| break; |
| } |
| pip->neighbormtu_mastersmsl = (mtu << 4) | dev->sm_sl; |
| pip->vlcap_inittype = 0x10; /* VLCap = VL0, InitType = 0 */ |
| pip->vl_high_limit = dev->vl_high_limit; |
| /* pip->vl_arb_high_cap; // only one VL */ |
| /* pip->vl_arb_low_cap; // only one VL */ |
| /* InitTypeReply = 0 */ |
| pip->inittypereply_mtucap = IB_MTU_4096; |
| // HCAs ignore VLStallCount and HOQLife |
| /* pip->vlstallcnt_hoqlife; */ |
| pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */ |
| pip->mkey_violations = cpu_to_be16(dev->mkey_violations); |
| /* P_KeyViolations are counted by hardware. */ |
| pip->pkey_violations = |
| cpu_to_be16((ipath_get_cr_errpkey(dev->dd) - |
| dev->z_pkey_violations) & 0xFFFF); |
| pip->qkey_violations = cpu_to_be16(dev->qkey_violations); |
| /* Only the hardware GUID is supported for now */ |
| pip->guid_cap = 1; |
| pip->clientrereg_resv_subnetto = dev->subnet_timeout; |
| /* 32.768 usec. response time (guessing) */ |
| pip->resv_resptimevalue = 3; |
| pip->localphyerrors_overrunerrors = |
| (get_phyerrthreshold(dev->dd) << 4) | |
| get_overrunthreshold(dev->dd); |
| /* pip->max_credit_hint; */ |
| /* pip->link_roundtrip_latency[3]; */ |
| |
| ret = reply(smp); |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * get_pkeys - return the PKEY table for port 0 |
| * @dd: the infinipath device |
| * @pkeys: the pkey table is placed here |
| */ |
| static int get_pkeys(struct ipath_devdata *dd, u16 * pkeys) |
| { |
| struct ipath_portdata *pd = dd->ipath_pd[0]; |
| |
| memcpy(pkeys, pd->port_pkeys, sizeof(pd->port_pkeys)); |
| |
| return 0; |
| } |
| |
| static int recv_subn_get_pkeytable(struct ib_smp *smp, |
| struct ib_device *ibdev) |
| { |
| u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff); |
| u16 *p = (u16 *) smp->data; |
| __be16 *q = (__be16 *) smp->data; |
| |
| /* 64 blocks of 32 16-bit P_Key entries */ |
| |
| memset(smp->data, 0, sizeof(smp->data)); |
| if (startpx == 0) { |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| unsigned i, n = ipath_get_npkeys(dev->dd); |
| |
| get_pkeys(dev->dd, p); |
| |
| for (i = 0; i < n; i++) |
| q[i] = cpu_to_be16(p[i]); |
| } else |
| smp->status |= IB_SMP_INVALID_FIELD; |
| |
| return reply(smp); |
| } |
| |
| static int recv_subn_set_guidinfo(struct ib_smp *smp, |
| struct ib_device *ibdev) |
| { |
| /* The only GUID we support is the first read-only entry. */ |
| return recv_subn_get_guidinfo(smp, ibdev); |
| } |
| |
| /** |
| * set_linkdowndefaultstate - set the default linkdown state |
| * @dd: the infinipath device |
| * @sleep: the new state |
| * |
| * Note that this will only take effect when the link state changes. |
| */ |
| static int set_linkdowndefaultstate(struct ipath_devdata *dd, int sleep) |
| { |
| if (sleep) |
| dd->ipath_ibcctrl |= INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE; |
| else |
| dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE; |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, |
| dd->ipath_ibcctrl); |
| return 0; |
| } |
| |
| /** |
| * recv_subn_set_portinfo - set port information |
| * @smp: the incoming SM packet |
| * @ibdev: the infiniband device |
| * @port: the port on the device |
| * |
| * Set Portinfo (see ch. 14.2.5.6). |
| */ |
| static int recv_subn_set_portinfo(struct ib_smp *smp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_port_info *pip = (struct ib_port_info *)smp->data; |
| struct ib_event event; |
| struct ipath_ibdev *dev; |
| u32 flags; |
| char clientrereg = 0; |
| u16 lid, smlid; |
| u8 lwe; |
| u8 lse; |
| u8 state; |
| u16 lstate; |
| u32 mtu; |
| int ret, ore; |
| |
| if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt) |
| goto err; |
| |
| dev = to_idev(ibdev); |
| event.device = ibdev; |
| event.element.port_num = port; |
| |
| dev->mkey = pip->mkey; |
| dev->gid_prefix = pip->gid_prefix; |
| dev->mkey_lease_period = be16_to_cpu(pip->mkey_lease_period); |
| |
| lid = be16_to_cpu(pip->lid); |
| if (lid != dev->dd->ipath_lid) { |
| /* Must be a valid unicast LID address. */ |
| if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE) |
| goto err; |
| ipath_set_lid(dev->dd, lid, pip->mkeyprot_resv_lmc & 7); |
| event.event = IB_EVENT_LID_CHANGE; |
| ib_dispatch_event(&event); |
| } |
| |
| smlid = be16_to_cpu(pip->sm_lid); |
| if (smlid != dev->sm_lid) { |
| /* Must be a valid unicast LID address. */ |
| if (smlid == 0 || smlid >= IPATH_MULTICAST_LID_BASE) |
| goto err; |
| dev->sm_lid = smlid; |
| event.event = IB_EVENT_SM_CHANGE; |
| ib_dispatch_event(&event); |
| } |
| |
| /* Only 4x supported but allow 1x or 4x to be set (see 14.2.6.6). */ |
| lwe = pip->link_width_enabled; |
| if ((lwe >= 4 && lwe <= 8) || (lwe >= 0xC && lwe <= 0xFE)) |
| goto err; |
| if (lwe == 0xFF) |
| dev->link_width_enabled = 3; /* 1x or 4x */ |
| else if (lwe) |
| dev->link_width_enabled = lwe; |
| |
| /* Only 2.5 Gbs supported. */ |
| lse = pip->linkspeedactive_enabled & 0xF; |
| if (lse >= 2 && lse <= 0xE) |
| goto err; |
| |
| /* Set link down default state. */ |
| switch (pip->portphysstate_linkdown & 0xF) { |
| case 0: /* NOP */ |
| break; |
| case 1: /* SLEEP */ |
| if (set_linkdowndefaultstate(dev->dd, 1)) |
| goto err; |
| break; |
| case 2: /* POLL */ |
| if (set_linkdowndefaultstate(dev->dd, 0)) |
| goto err; |
| break; |
| default: |
| goto err; |
| } |
| |
| dev->mkeyprot_resv_lmc = pip->mkeyprot_resv_lmc; |
| dev->vl_high_limit = pip->vl_high_limit; |
| |
| switch ((pip->neighbormtu_mastersmsl >> 4) & 0xF) { |
| case IB_MTU_256: |
| mtu = 256; |
| break; |
| case IB_MTU_512: |
| mtu = 512; |
| break; |
| case IB_MTU_1024: |
| mtu = 1024; |
| break; |
| case IB_MTU_2048: |
| mtu = 2048; |
| break; |
| case IB_MTU_4096: |
| mtu = 4096; |
| break; |
| default: |
| /* XXX We have already partially updated our state! */ |
| goto err; |
| } |
| ipath_set_mtu(dev->dd, mtu); |
| |
| dev->sm_sl = pip->neighbormtu_mastersmsl & 0xF; |
| |
| /* We only support VL0 */ |
| if (((pip->operationalvl_pei_peo_fpi_fpo >> 4) & 0xF) > 1) |
| goto err; |
| |
| if (pip->mkey_violations == 0) |
| dev->mkey_violations = 0; |
| |
| /* |
| * Hardware counter can't be reset so snapshot and subtract |
| * later. |
| */ |
| if (pip->pkey_violations == 0) |
| dev->z_pkey_violations = ipath_get_cr_errpkey(dev->dd); |
| |
| if (pip->qkey_violations == 0) |
| dev->qkey_violations = 0; |
| |
| ore = pip->localphyerrors_overrunerrors; |
| if (set_phyerrthreshold(dev->dd, (ore >> 4) & 0xF)) |
| goto err; |
| |
| if (set_overrunthreshold(dev->dd, (ore & 0xF))) |
| goto err; |
| |
| dev->subnet_timeout = pip->clientrereg_resv_subnetto & 0x1F; |
| |
| if (pip->clientrereg_resv_subnetto & 0x80) { |
| clientrereg = 1; |
| event.event = IB_EVENT_CLIENT_REREGISTER; |
| ib_dispatch_event(&event); |
| } |
| |
| /* |
| * Do the port state change now that the other link parameters |
| * have been set. |
| * Changing the port physical state only makes sense if the link |
| * is down or is being set to down. |
| */ |
| state = pip->linkspeed_portstate & 0xF; |
| flags = dev->dd->ipath_flags; |
| lstate = (pip->portphysstate_linkdown >> 4) & 0xF; |
| if (lstate && !(state == IB_PORT_DOWN || state == IB_PORT_NOP)) |
| goto err; |
| |
| /* |
| * Only state changes of DOWN, ARM, and ACTIVE are valid |
| * and must be in the correct state to take effect (see 7.2.6). |
| */ |
| switch (state) { |
| case IB_PORT_NOP: |
| if (lstate == 0) |
| break; |
| /* FALLTHROUGH */ |
| case IB_PORT_DOWN: |
| if (lstate == 0) |
| if (get_linkdowndefaultstate(dev->dd)) |
| lstate = IPATH_IB_LINKDOWN_SLEEP; |
| else |
| lstate = IPATH_IB_LINKDOWN; |
| else if (lstate == 1) |
| lstate = IPATH_IB_LINKDOWN_SLEEP; |
| else if (lstate == 2) |
| lstate = IPATH_IB_LINKDOWN; |
| else if (lstate == 3) |
| lstate = IPATH_IB_LINKDOWN_DISABLE; |
| else |
| goto err; |
| ipath_set_linkstate(dev->dd, lstate); |
| if (flags & IPATH_LINKACTIVE) { |
| event.event = IB_EVENT_PORT_ERR; |
| ib_dispatch_event(&event); |
| } |
| break; |
| case IB_PORT_ARMED: |
| if (!(flags & (IPATH_LINKINIT | IPATH_LINKACTIVE))) |
| break; |
| ipath_set_linkstate(dev->dd, IPATH_IB_LINKARM); |
| if (flags & IPATH_LINKACTIVE) { |
| event.event = IB_EVENT_PORT_ERR; |
| ib_dispatch_event(&event); |
| } |
| break; |
| case IB_PORT_ACTIVE: |
| if (!(flags & IPATH_LINKARMED)) |
| break; |
| ipath_set_linkstate(dev->dd, IPATH_IB_LINKACTIVE); |
| event.event = IB_EVENT_PORT_ACTIVE; |
| ib_dispatch_event(&event); |
| break; |
| default: |
| /* XXX We have already partially updated our state! */ |
| goto err; |
| } |
| |
| ret = recv_subn_get_portinfo(smp, ibdev, port); |
| |
| if (clientrereg) |
| pip->clientrereg_resv_subnetto |= 0x80; |
| |
| goto done; |
| |
| err: |
| smp->status |= IB_SMP_INVALID_FIELD; |
| ret = recv_subn_get_portinfo(smp, ibdev, port); |
| |
| done: |
| return ret; |
| } |
| |
| /** |
| * rm_pkey - decrecment the reference count for the given PKEY |
| * @dd: the infinipath device |
| * @key: the PKEY index |
| * |
| * Return true if this was the last reference and the hardware table entry |
| * needs to be changed. |
| */ |
| static int rm_pkey(struct ipath_devdata *dd, u16 key) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) { |
| if (dd->ipath_pkeys[i] != key) |
| continue; |
| if (atomic_dec_and_test(&dd->ipath_pkeyrefs[i])) { |
| dd->ipath_pkeys[i] = 0; |
| ret = 1; |
| goto bail; |
| } |
| break; |
| } |
| |
| ret = 0; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * add_pkey - add the given PKEY to the hardware table |
| * @dd: the infinipath device |
| * @key: the PKEY |
| * |
| * Return an error code if unable to add the entry, zero if no change, |
| * or 1 if the hardware PKEY register needs to be updated. |
| */ |
| static int add_pkey(struct ipath_devdata *dd, u16 key) |
| { |
| int i; |
| u16 lkey = key & 0x7FFF; |
| int any = 0; |
| int ret; |
| |
| if (lkey == 0x7FFF) { |
| ret = 0; |
| goto bail; |
| } |
| |
| /* Look for an empty slot or a matching PKEY. */ |
| for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) { |
| if (!dd->ipath_pkeys[i]) { |
| any++; |
| continue; |
| } |
| /* If it matches exactly, try to increment the ref count */ |
| if (dd->ipath_pkeys[i] == key) { |
| if (atomic_inc_return(&dd->ipath_pkeyrefs[i]) > 1) { |
| ret = 0; |
| goto bail; |
| } |
| /* Lost the race. Look for an empty slot below. */ |
| atomic_dec(&dd->ipath_pkeyrefs[i]); |
| any++; |
| } |
| /* |
| * It makes no sense to have both the limited and unlimited |
| * PKEY set at the same time since the unlimited one will |
| * disable the limited one. |
| */ |
| if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) { |
| ret = -EEXIST; |
| goto bail; |
| } |
| } |
| if (!any) { |
| ret = -EBUSY; |
| goto bail; |
| } |
| for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) { |
| if (!dd->ipath_pkeys[i] && |
| atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) { |
| /* for ipathstats, etc. */ |
| ipath_stats.sps_pkeys[i] = lkey; |
| dd->ipath_pkeys[i] = key; |
| ret = 1; |
| goto bail; |
| } |
| } |
| ret = -EBUSY; |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * set_pkeys - set the PKEY table for port 0 |
| * @dd: the infinipath device |
| * @pkeys: the PKEY table |
| */ |
| static int set_pkeys(struct ipath_devdata *dd, u16 *pkeys) |
| { |
| struct ipath_portdata *pd; |
| int i; |
| int changed = 0; |
| |
| pd = dd->ipath_pd[0]; |
| |
| for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) { |
| u16 key = pkeys[i]; |
| u16 okey = pd->port_pkeys[i]; |
| |
| if (key == okey) |
| continue; |
| /* |
| * The value of this PKEY table entry is changing. |
| * Remove the old entry in the hardware's array of PKEYs. |
| */ |
| if (okey & 0x7FFF) |
| changed |= rm_pkey(dd, okey); |
| if (key & 0x7FFF) { |
| int ret = add_pkey(dd, key); |
| |
| if (ret < 0) |
| key = 0; |
| else |
| changed |= ret; |
| } |
| pd->port_pkeys[i] = key; |
| } |
| if (changed) { |
| u64 pkey; |
| |
| pkey = (u64) dd->ipath_pkeys[0] | |
| ((u64) dd->ipath_pkeys[1] << 16) | |
| ((u64) dd->ipath_pkeys[2] << 32) | |
| ((u64) dd->ipath_pkeys[3] << 48); |
| ipath_cdbg(VERBOSE, "p0 new pkey reg %llx\n", |
| (unsigned long long) pkey); |
| ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey, |
| pkey); |
| } |
| return 0; |
| } |
| |
| static int recv_subn_set_pkeytable(struct ib_smp *smp, |
| struct ib_device *ibdev) |
| { |
| u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff); |
| __be16 *p = (__be16 *) smp->data; |
| u16 *q = (u16 *) smp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| unsigned i, n = ipath_get_npkeys(dev->dd); |
| |
| for (i = 0; i < n; i++) |
| q[i] = be16_to_cpu(p[i]); |
| |
| if (startpx != 0 || set_pkeys(dev->dd, q) != 0) |
| smp->status |= IB_SMP_INVALID_FIELD; |
| |
| return recv_subn_get_pkeytable(smp, ibdev); |
| } |
| |
| #define IB_PMA_CLASS_PORT_INFO __constant_htons(0x0001) |
| #define IB_PMA_PORT_SAMPLES_CONTROL __constant_htons(0x0010) |
| #define IB_PMA_PORT_SAMPLES_RESULT __constant_htons(0x0011) |
| #define IB_PMA_PORT_COUNTERS __constant_htons(0x0012) |
| #define IB_PMA_PORT_COUNTERS_EXT __constant_htons(0x001D) |
| #define IB_PMA_PORT_SAMPLES_RESULT_EXT __constant_htons(0x001E) |
| |
| struct ib_perf { |
| u8 base_version; |
| u8 mgmt_class; |
| u8 class_version; |
| u8 method; |
| __be16 status; |
| __be16 unused; |
| __be64 tid; |
| __be16 attr_id; |
| __be16 resv; |
| __be32 attr_mod; |
| u8 reserved[40]; |
| u8 data[192]; |
| } __attribute__ ((packed)); |
| |
| struct ib_pma_classportinfo { |
| u8 base_version; |
| u8 class_version; |
| __be16 cap_mask; |
| u8 reserved[3]; |
| u8 resp_time_value; /* only lower 5 bits */ |
| union ib_gid redirect_gid; |
| __be32 redirect_tc_sl_fl; /* 8, 4, 20 bits respectively */ |
| __be16 redirect_lid; |
| __be16 redirect_pkey; |
| __be32 redirect_qp; /* only lower 24 bits */ |
| __be32 redirect_qkey; |
| union ib_gid trap_gid; |
| __be32 trap_tc_sl_fl; /* 8, 4, 20 bits respectively */ |
| __be16 trap_lid; |
| __be16 trap_pkey; |
| __be32 trap_hl_qp; /* 8, 24 bits respectively */ |
| __be32 trap_qkey; |
| } __attribute__ ((packed)); |
| |
| struct ib_pma_portsamplescontrol { |
| u8 opcode; |
| u8 port_select; |
| u8 tick; |
| u8 counter_width; /* only lower 3 bits */ |
| __be32 counter_mask0_9; /* 2, 10 * 3, bits */ |
| __be16 counter_mask10_14; /* 1, 5 * 3, bits */ |
| u8 sample_mechanisms; |
| u8 sample_status; /* only lower 2 bits */ |
| __be64 option_mask; |
| __be64 vendor_mask; |
| __be32 sample_start; |
| __be32 sample_interval; |
| __be16 tag; |
| __be16 counter_select[15]; |
| } __attribute__ ((packed)); |
| |
| struct ib_pma_portsamplesresult { |
| __be16 tag; |
| __be16 sample_status; /* only lower 2 bits */ |
| __be32 counter[15]; |
| } __attribute__ ((packed)); |
| |
| struct ib_pma_portsamplesresult_ext { |
| __be16 tag; |
| __be16 sample_status; /* only lower 2 bits */ |
| __be32 extended_width; /* only upper 2 bits */ |
| __be64 counter[15]; |
| } __attribute__ ((packed)); |
| |
| struct ib_pma_portcounters { |
| u8 reserved; |
| u8 port_select; |
| __be16 counter_select; |
| __be16 symbol_error_counter; |
| u8 link_error_recovery_counter; |
| u8 link_downed_counter; |
| __be16 port_rcv_errors; |
| __be16 port_rcv_remphys_errors; |
| __be16 port_rcv_switch_relay_errors; |
| __be16 port_xmit_discards; |
| u8 port_xmit_constraint_errors; |
| u8 port_rcv_constraint_errors; |
| u8 reserved1; |
| u8 lli_ebor_errors; /* 4, 4, bits */ |
| __be16 reserved2; |
| __be16 vl15_dropped; |
| __be32 port_xmit_data; |
| __be32 port_rcv_data; |
| __be32 port_xmit_packets; |
| __be32 port_rcv_packets; |
| } __attribute__ ((packed)); |
| |
| #define IB_PMA_SEL_SYMBOL_ERROR __constant_htons(0x0001) |
| #define IB_PMA_SEL_LINK_ERROR_RECOVERY __constant_htons(0x0002) |
| #define IB_PMA_SEL_LINK_DOWNED __constant_htons(0x0004) |
| #define IB_PMA_SEL_PORT_RCV_ERRORS __constant_htons(0x0008) |
| #define IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS __constant_htons(0x0010) |
| #define IB_PMA_SEL_PORT_XMIT_DISCARDS __constant_htons(0x0040) |
| #define IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS __constant_htons(0x0200) |
| #define IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS __constant_htons(0x0400) |
| #define IB_PMA_SEL_PORT_VL15_DROPPED __constant_htons(0x0800) |
| #define IB_PMA_SEL_PORT_XMIT_DATA __constant_htons(0x1000) |
| #define IB_PMA_SEL_PORT_RCV_DATA __constant_htons(0x2000) |
| #define IB_PMA_SEL_PORT_XMIT_PACKETS __constant_htons(0x4000) |
| #define IB_PMA_SEL_PORT_RCV_PACKETS __constant_htons(0x8000) |
| |
| struct ib_pma_portcounters_ext { |
| u8 reserved; |
| u8 port_select; |
| __be16 counter_select; |
| __be32 reserved1; |
| __be64 port_xmit_data; |
| __be64 port_rcv_data; |
| __be64 port_xmit_packets; |
| __be64 port_rcv_packets; |
| __be64 port_unicast_xmit_packets; |
| __be64 port_unicast_rcv_packets; |
| __be64 port_multicast_xmit_packets; |
| __be64 port_multicast_rcv_packets; |
| } __attribute__ ((packed)); |
| |
| #define IB_PMA_SELX_PORT_XMIT_DATA __constant_htons(0x0001) |
| #define IB_PMA_SELX_PORT_RCV_DATA __constant_htons(0x0002) |
| #define IB_PMA_SELX_PORT_XMIT_PACKETS __constant_htons(0x0004) |
| #define IB_PMA_SELX_PORT_RCV_PACKETS __constant_htons(0x0008) |
| #define IB_PMA_SELX_PORT_UNI_XMIT_PACKETS __constant_htons(0x0010) |
| #define IB_PMA_SELX_PORT_UNI_RCV_PACKETS __constant_htons(0x0020) |
| #define IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS __constant_htons(0x0040) |
| #define IB_PMA_SELX_PORT_MULTI_RCV_PACKETS __constant_htons(0x0080) |
| |
| static int recv_pma_get_classportinfo(struct ib_perf *pmp) |
| { |
| struct ib_pma_classportinfo *p = |
| (struct ib_pma_classportinfo *)pmp->data; |
| |
| memset(pmp->data, 0, sizeof(pmp->data)); |
| |
| if (pmp->attr_mod != 0) |
| pmp->status |= IB_SMP_INVALID_FIELD; |
| |
| /* Indicate AllPortSelect is valid (only one port anyway) */ |
| p->cap_mask = __constant_cpu_to_be16(1 << 8); |
| p->base_version = 1; |
| p->class_version = 1; |
| /* |
| * Expected response time is 4.096 usec. * 2^18 == 1.073741824 |
| * sec. |
| */ |
| p->resp_time_value = 18; |
| |
| return reply((struct ib_smp *) pmp); |
| } |
| |
| /* |
| * The PortSamplesControl.CounterMasks field is an array of 3 bit fields |
| * which specify the N'th counter's capabilities. See ch. 16.1.3.2. |
| * We support 5 counters which only count the mandatory quantities. |
| */ |
| #define COUNTER_MASK(q, n) (q << ((9 - n) * 3)) |
| #define COUNTER_MASK0_9 \ |
| __constant_cpu_to_be32(COUNTER_MASK(1, 0) | \ |
| COUNTER_MASK(1, 1) | \ |
| COUNTER_MASK(1, 2) | \ |
| COUNTER_MASK(1, 3) | \ |
| COUNTER_MASK(1, 4)) |
| |
| static int recv_pma_get_portsamplescontrol(struct ib_perf *pmp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_pma_portsamplescontrol *p = |
| (struct ib_pma_portsamplescontrol *)pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| unsigned long flags; |
| u8 port_select = p->port_select; |
| |
| memset(pmp->data, 0, sizeof(pmp->data)); |
| |
| p->port_select = port_select; |
| if (pmp->attr_mod != 0 || |
| (port_select != port && port_select != 0xFF)) |
| pmp->status |= IB_SMP_INVALID_FIELD; |
| /* |
| * Ticks are 10x the link transfer period which for 2.5Gbs is 4 |
| * nsec. 0 == 4 nsec., 1 == 8 nsec., ..., 255 == 1020 nsec. Sample |
| * intervals are counted in ticks. Since we use Linux timers, that |
| * count in jiffies, we can't sample for less than 1000 ticks if HZ |
| * == 1000 (4000 ticks if HZ is 250). |
| */ |
| /* XXX This is WRONG. */ |
| p->tick = 250; /* 1 usec. */ |
| p->counter_width = 4; /* 32 bit counters */ |
| p->counter_mask0_9 = COUNTER_MASK0_9; |
| spin_lock_irqsave(&dev->pending_lock, flags); |
| p->sample_status = dev->pma_sample_status; |
| p->sample_start = cpu_to_be32(dev->pma_sample_start); |
| p->sample_interval = cpu_to_be32(dev->pma_sample_interval); |
| p->tag = cpu_to_be16(dev->pma_tag); |
| p->counter_select[0] = dev->pma_counter_select[0]; |
| p->counter_select[1] = dev->pma_counter_select[1]; |
| p->counter_select[2] = dev->pma_counter_select[2]; |
| p->counter_select[3] = dev->pma_counter_select[3]; |
| p->counter_select[4] = dev->pma_counter_select[4]; |
| spin_unlock_irqrestore(&dev->pending_lock, flags); |
| |
| return reply((struct ib_smp *) pmp); |
| } |
| |
| static int recv_pma_set_portsamplescontrol(struct ib_perf *pmp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_pma_portsamplescontrol *p = |
| (struct ib_pma_portsamplescontrol *)pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| unsigned long flags; |
| u32 start; |
| int ret; |
| |
| if (pmp->attr_mod != 0 || |
| (p->port_select != port && p->port_select != 0xFF)) { |
| pmp->status |= IB_SMP_INVALID_FIELD; |
| ret = reply((struct ib_smp *) pmp); |
| goto bail; |
| } |
| |
| start = be32_to_cpu(p->sample_start); |
| if (start != 0) { |
| spin_lock_irqsave(&dev->pending_lock, flags); |
| if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_DONE) { |
| dev->pma_sample_status = |
| IB_PMA_SAMPLE_STATUS_STARTED; |
| dev->pma_sample_start = start; |
| dev->pma_sample_interval = |
| be32_to_cpu(p->sample_interval); |
| dev->pma_tag = be16_to_cpu(p->tag); |
| if (p->counter_select[0]) |
| dev->pma_counter_select[0] = |
| p->counter_select[0]; |
| if (p->counter_select[1]) |
| dev->pma_counter_select[1] = |
| p->counter_select[1]; |
| if (p->counter_select[2]) |
| dev->pma_counter_select[2] = |
| p->counter_select[2]; |
| if (p->counter_select[3]) |
| dev->pma_counter_select[3] = |
| p->counter_select[3]; |
| if (p->counter_select[4]) |
| dev->pma_counter_select[4] = |
| p->counter_select[4]; |
| } |
| spin_unlock_irqrestore(&dev->pending_lock, flags); |
| } |
| ret = recv_pma_get_portsamplescontrol(pmp, ibdev, port); |
| |
| bail: |
| return ret; |
| } |
| |
| static u64 get_counter(struct ipath_ibdev *dev, __be16 sel) |
| { |
| u64 ret; |
| |
| switch (sel) { |
| case IB_PMA_PORT_XMIT_DATA: |
| ret = dev->ipath_sword; |
| break; |
| case IB_PMA_PORT_RCV_DATA: |
| ret = dev->ipath_rword; |
| break; |
| case IB_PMA_PORT_XMIT_PKTS: |
| ret = dev->ipath_spkts; |
| break; |
| case IB_PMA_PORT_RCV_PKTS: |
| ret = dev->ipath_rpkts; |
| break; |
| case IB_PMA_PORT_XMIT_WAIT: |
| ret = dev->ipath_xmit_wait; |
| break; |
| default: |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int recv_pma_get_portsamplesresult(struct ib_perf *pmp, |
| struct ib_device *ibdev) |
| { |
| struct ib_pma_portsamplesresult *p = |
| (struct ib_pma_portsamplesresult *)pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| int i; |
| |
| memset(pmp->data, 0, sizeof(pmp->data)); |
| p->tag = cpu_to_be16(dev->pma_tag); |
| p->sample_status = cpu_to_be16(dev->pma_sample_status); |
| for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++) |
| p->counter[i] = cpu_to_be32( |
| get_counter(dev, dev->pma_counter_select[i])); |
| |
| return reply((struct ib_smp *) pmp); |
| } |
| |
| static int recv_pma_get_portsamplesresult_ext(struct ib_perf *pmp, |
| struct ib_device *ibdev) |
| { |
| struct ib_pma_portsamplesresult_ext *p = |
| (struct ib_pma_portsamplesresult_ext *)pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| int i; |
| |
| memset(pmp->data, 0, sizeof(pmp->data)); |
| p->tag = cpu_to_be16(dev->pma_tag); |
| p->sample_status = cpu_to_be16(dev->pma_sample_status); |
| /* 64 bits */ |
| p->extended_width = __constant_cpu_to_be32(0x80000000); |
| for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++) |
| p->counter[i] = cpu_to_be64( |
| get_counter(dev, dev->pma_counter_select[i])); |
| |
| return reply((struct ib_smp *) pmp); |
| } |
| |
| static int recv_pma_get_portcounters(struct ib_perf *pmp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_pma_portcounters *p = (struct ib_pma_portcounters *) |
| pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| struct ipath_verbs_counters cntrs; |
| u8 port_select = p->port_select; |
| |
| ipath_get_counters(dev->dd, &cntrs); |
| |
| /* Adjust counters for any resets done. */ |
| cntrs.symbol_error_counter -= dev->z_symbol_error_counter; |
| cntrs.link_error_recovery_counter -= |
| dev->z_link_error_recovery_counter; |
| cntrs.link_downed_counter -= dev->z_link_downed_counter; |
| cntrs.port_rcv_errors += dev->rcv_errors; |
| cntrs.port_rcv_errors -= dev->z_port_rcv_errors; |
| cntrs.port_rcv_remphys_errors -= dev->z_port_rcv_remphys_errors; |
| cntrs.port_xmit_discards -= dev->z_port_xmit_discards; |
| cntrs.port_xmit_data -= dev->z_port_xmit_data; |
| cntrs.port_rcv_data -= dev->z_port_rcv_data; |
| cntrs.port_xmit_packets -= dev->z_port_xmit_packets; |
| cntrs.port_rcv_packets -= dev->z_port_rcv_packets; |
| cntrs.local_link_integrity_errors -= |
| dev->z_local_link_integrity_errors; |
| cntrs.excessive_buffer_overrun_errors -= |
| dev->z_excessive_buffer_overrun_errors; |
| |
| memset(pmp->data, 0, sizeof(pmp->data)); |
| |
| p->port_select = port_select; |
| if (pmp->attr_mod != 0 || |
| (port_select != port && port_select != 0xFF)) |
| pmp->status |= IB_SMP_INVALID_FIELD; |
| |
| if (cntrs.symbol_error_counter > 0xFFFFUL) |
| p->symbol_error_counter = __constant_cpu_to_be16(0xFFFF); |
| else |
| p->symbol_error_counter = |
| cpu_to_be16((u16)cntrs.symbol_error_counter); |
| if (cntrs.link_error_recovery_counter > 0xFFUL) |
| p->link_error_recovery_counter = 0xFF; |
| else |
| p->link_error_recovery_counter = |
| (u8)cntrs.link_error_recovery_counter; |
| if (cntrs.link_downed_counter > 0xFFUL) |
| p->link_downed_counter = 0xFF; |
| else |
| p->link_downed_counter = (u8)cntrs.link_downed_counter; |
| if (cntrs.port_rcv_errors > 0xFFFFUL) |
| p->port_rcv_errors = __constant_cpu_to_be16(0xFFFF); |
| else |
| p->port_rcv_errors = |
| cpu_to_be16((u16) cntrs.port_rcv_errors); |
| if (cntrs.port_rcv_remphys_errors > 0xFFFFUL) |
| p->port_rcv_remphys_errors = __constant_cpu_to_be16(0xFFFF); |
| else |
| p->port_rcv_remphys_errors = |
| cpu_to_be16((u16)cntrs.port_rcv_remphys_errors); |
| if (cntrs.port_xmit_discards > 0xFFFFUL) |
| p->port_xmit_discards = __constant_cpu_to_be16(0xFFFF); |
| else |
| p->port_xmit_discards = |
| cpu_to_be16((u16)cntrs.port_xmit_discards); |
| if (cntrs.local_link_integrity_errors > 0xFUL) |
| cntrs.local_link_integrity_errors = 0xFUL; |
| if (cntrs.excessive_buffer_overrun_errors > 0xFUL) |
| cntrs.excessive_buffer_overrun_errors = 0xFUL; |
| p->lli_ebor_errors = (cntrs.local_link_integrity_errors << 4) | |
| cntrs.excessive_buffer_overrun_errors; |
| if (dev->n_vl15_dropped > 0xFFFFUL) |
| p->vl15_dropped = __constant_cpu_to_be16(0xFFFF); |
| else |
| p->vl15_dropped = cpu_to_be16((u16)dev->n_vl15_dropped); |
| if (cntrs.port_xmit_data > 0xFFFFFFFFUL) |
| p->port_xmit_data = __constant_cpu_to_be32(0xFFFFFFFF); |
| else |
| p->port_xmit_data = cpu_to_be32((u32)cntrs.port_xmit_data); |
| if (cntrs.port_rcv_data > 0xFFFFFFFFUL) |
| p->port_rcv_data = __constant_cpu_to_be32(0xFFFFFFFF); |
| else |
| p->port_rcv_data = cpu_to_be32((u32)cntrs.port_rcv_data); |
| if (cntrs.port_xmit_packets > 0xFFFFFFFFUL) |
| p->port_xmit_packets = __constant_cpu_to_be32(0xFFFFFFFF); |
| else |
| p->port_xmit_packets = |
| cpu_to_be32((u32)cntrs.port_xmit_packets); |
| if (cntrs.port_rcv_packets > 0xFFFFFFFFUL) |
| p->port_rcv_packets = __constant_cpu_to_be32(0xFFFFFFFF); |
| else |
| p->port_rcv_packets = |
| cpu_to_be32((u32) cntrs.port_rcv_packets); |
| |
| return reply((struct ib_smp *) pmp); |
| } |
| |
| static int recv_pma_get_portcounters_ext(struct ib_perf *pmp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_pma_portcounters_ext *p = |
| (struct ib_pma_portcounters_ext *)pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| u64 swords, rwords, spkts, rpkts, xwait; |
| u8 port_select = p->port_select; |
| |
| ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts, |
| &rpkts, &xwait); |
| |
| /* Adjust counters for any resets done. */ |
| swords -= dev->z_port_xmit_data; |
| rwords -= dev->z_port_rcv_data; |
| spkts -= dev->z_port_xmit_packets; |
| rpkts -= dev->z_port_rcv_packets; |
| |
| memset(pmp->data, 0, sizeof(pmp->data)); |
| |
| p->port_select = port_select; |
| if (pmp->attr_mod != 0 || |
| (port_select != port && port_select != 0xFF)) |
| pmp->status |= IB_SMP_INVALID_FIELD; |
| |
| p->port_xmit_data = cpu_to_be64(swords); |
| p->port_rcv_data = cpu_to_be64(rwords); |
| p->port_xmit_packets = cpu_to_be64(spkts); |
| p->port_rcv_packets = cpu_to_be64(rpkts); |
| p->port_unicast_xmit_packets = cpu_to_be64(dev->n_unicast_xmit); |
| p->port_unicast_rcv_packets = cpu_to_be64(dev->n_unicast_rcv); |
| p->port_multicast_xmit_packets = cpu_to_be64(dev->n_multicast_xmit); |
| p->port_multicast_rcv_packets = cpu_to_be64(dev->n_multicast_rcv); |
| |
| return reply((struct ib_smp *) pmp); |
| } |
| |
| static int recv_pma_set_portcounters(struct ib_perf *pmp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_pma_portcounters *p = (struct ib_pma_portcounters *) |
| pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| struct ipath_verbs_counters cntrs; |
| |
| /* |
| * Since the HW doesn't support clearing counters, we save the |
| * current count and subtract it from future responses. |
| */ |
| ipath_get_counters(dev->dd, &cntrs); |
| |
| if (p->counter_select & IB_PMA_SEL_SYMBOL_ERROR) |
| dev->z_symbol_error_counter = cntrs.symbol_error_counter; |
| |
| if (p->counter_select & IB_PMA_SEL_LINK_ERROR_RECOVERY) |
| dev->z_link_error_recovery_counter = |
| cntrs.link_error_recovery_counter; |
| |
| if (p->counter_select & IB_PMA_SEL_LINK_DOWNED) |
| dev->z_link_downed_counter = cntrs.link_downed_counter; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_RCV_ERRORS) |
| dev->z_port_rcv_errors = |
| cntrs.port_rcv_errors + dev->rcv_errors; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS) |
| dev->z_port_rcv_remphys_errors = |
| cntrs.port_rcv_remphys_errors; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DISCARDS) |
| dev->z_port_xmit_discards = cntrs.port_xmit_discards; |
| |
| if (p->counter_select & IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS) |
| dev->z_local_link_integrity_errors = |
| cntrs.local_link_integrity_errors; |
| |
| if (p->counter_select & IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS) |
| dev->z_excessive_buffer_overrun_errors = |
| cntrs.excessive_buffer_overrun_errors; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) |
| dev->n_vl15_dropped = 0; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA) |
| dev->z_port_xmit_data = cntrs.port_xmit_data; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_RCV_DATA) |
| dev->z_port_rcv_data = cntrs.port_rcv_data; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_XMIT_PACKETS) |
| dev->z_port_xmit_packets = cntrs.port_xmit_packets; |
| |
| if (p->counter_select & IB_PMA_SEL_PORT_RCV_PACKETS) |
| dev->z_port_rcv_packets = cntrs.port_rcv_packets; |
| |
| return recv_pma_get_portcounters(pmp, ibdev, port); |
| } |
| |
| static int recv_pma_set_portcounters_ext(struct ib_perf *pmp, |
| struct ib_device *ibdev, u8 port) |
| { |
| struct ib_pma_portcounters *p = (struct ib_pma_portcounters *) |
| pmp->data; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| u64 swords, rwords, spkts, rpkts, xwait; |
| |
| ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts, |
| &rpkts, &xwait); |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_XMIT_DATA) |
| dev->z_port_xmit_data = swords; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_RCV_DATA) |
| dev->z_port_rcv_data = rwords; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_XMIT_PACKETS) |
| dev->z_port_xmit_packets = spkts; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_RCV_PACKETS) |
| dev->z_port_rcv_packets = rpkts; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_UNI_XMIT_PACKETS) |
| dev->n_unicast_xmit = 0; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_UNI_RCV_PACKETS) |
| dev->n_unicast_rcv = 0; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS) |
| dev->n_multicast_xmit = 0; |
| |
| if (p->counter_select & IB_PMA_SELX_PORT_MULTI_RCV_PACKETS) |
| dev->n_multicast_rcv = 0; |
| |
| return recv_pma_get_portcounters_ext(pmp, ibdev, port); |
| } |
| |
| static int process_subn(struct ib_device *ibdev, int mad_flags, |
| u8 port_num, struct ib_mad *in_mad, |
| struct ib_mad *out_mad) |
| { |
| struct ib_smp *smp = (struct ib_smp *)out_mad; |
| struct ipath_ibdev *dev = to_idev(ibdev); |
| int ret; |
| |
| *out_mad = *in_mad; |
| if (smp->class_version != 1) { |
| smp->status |= IB_SMP_UNSUP_VERSION; |
| ret = reply(smp); |
| goto bail; |
| } |
| |
| /* Is the mkey in the process of expiring? */ |
| if (dev->mkey_lease_timeout && jiffies >= dev->mkey_lease_timeout) { |
| /* Clear timeout and mkey protection field. */ |
| dev->mkey_lease_timeout = 0; |
| dev->mkeyprot_resv_lmc &= 0x3F; |
| } |
| |
| /* |
| * M_Key checking depends on |
| * Portinfo:M_Key_protect_bits |
| */ |
| if ((mad_flags & IB_MAD_IGNORE_MKEY) == 0 && dev->mkey != 0 && |
| dev->mkey != smp->mkey && |
| (smp->method == IB_MGMT_METHOD_SET || |
| (smp->method == IB_MGMT_METHOD_GET && |
| (dev->mkeyprot_resv_lmc >> 7) != 0))) { |
| if (dev->mkey_violations != 0xFFFF) |
| ++dev->mkey_violations; |
| if (dev->mkey_lease_timeout || |
| dev->mkey_lease_period == 0) { |
| ret = IB_MAD_RESULT_SUCCESS | |
| IB_MAD_RESULT_CONSUMED; |
| goto bail; |
| } |
| dev->mkey_lease_timeout = jiffies + |
| dev->mkey_lease_period * HZ; |
| /* Future: Generate a trap notice. */ |
| ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED; |
| goto bail; |
| } else if (dev->mkey_lease_timeout) |
| dev->mkey_lease_timeout = 0; |
| |
| switch (smp->method) { |
| case IB_MGMT_METHOD_GET: |
| switch (smp->attr_id) { |
| case IB_SMP_ATTR_NODE_DESC: |
| ret = recv_subn_get_nodedescription(smp, ibdev); |
| goto bail; |
| case IB_SMP_ATTR_NODE_INFO: |
| ret = recv_subn_get_nodeinfo(smp, ibdev, port_num); |
| goto bail; |
| case IB_SMP_ATTR_GUID_INFO: |
| ret = recv_subn_get_guidinfo(smp, ibdev); |
| goto bail; |
| case IB_SMP_ATTR_PORT_INFO: |
| ret = recv_subn_get_portinfo(smp, ibdev, port_num); |
| goto bail; |
| case IB_SMP_ATTR_PKEY_TABLE: |
| ret = recv_subn_get_pkeytable(smp, ibdev); |
| goto bail; |
| case IB_SMP_ATTR_SM_INFO: |
| if (dev->port_cap_flags & IB_PORT_SM_DISABLED) { |
| ret = IB_MAD_RESULT_SUCCESS | |
| IB_MAD_RESULT_CONSUMED; |
| goto bail; |
| } |
| if (dev->port_cap_flags & IB_PORT_SM) { |
| ret = IB_MAD_RESULT_SUCCESS; |
| goto bail; |
| } |
| /* FALLTHROUGH */ |
| default: |
| smp->status |= IB_SMP_UNSUP_METH_ATTR; |
| ret = reply(smp); |
| goto bail; |
| } |
| |
| case IB_MGMT_METHOD_SET: |
| switch (smp->attr_id) { |
| case IB_SMP_ATTR_GUID_INFO: |
| ret = recv_subn_set_guidinfo(smp, ibdev); |
| goto bail; |
| case IB_SMP_ATTR_PORT_INFO: |
| ret = recv_subn_set_portinfo(smp, ibdev, port_num); |
| goto bail; |
| case IB_SMP_ATTR_PKEY_TABLE: |
| ret = recv_subn_set_pkeytable(smp, ibdev); |
| goto bail; |
| case IB_SMP_ATTR_SM_INFO: |
| if (dev->port_cap_flags & IB_PORT_SM_DISABLED) { |
| ret = IB_MAD_RESULT_SUCCESS | |
| IB_MAD_RESULT_CONSUMED; |
| goto bail; |
| } |
| if (dev->port_cap_flags & IB_PORT_SM) { |
| ret = IB_MAD_RESULT_SUCCESS; |
| goto bail; |
| } |
| /* FALLTHROUGH */ |
| default: |
| smp->status |= IB_SMP_UNSUP_METH_ATTR; |
| ret = reply(smp); |
| goto bail; |
| } |
| |
| case IB_MGMT_METHOD_GET_RESP: |
| /* |
| * The ib_mad module will call us to process responses |
| * before checking for other consumers. |
| * Just tell the caller to process it normally. |
| */ |
| ret = IB_MAD_RESULT_FAILURE; |
| goto bail; |
| default: |
| smp->status |= IB_SMP_UNSUP_METHOD; |
| ret = reply(smp); |
| } |
| |
| bail: |
| return ret; |
| } |
| |
| static int process_perf(struct ib_device *ibdev, u8 port_num, |
| struct ib_mad *in_mad, |
| struct ib_mad *out_mad) |
| { |
| struct ib_perf *pmp = (struct ib_perf *)out_mad; |
| int ret; |
| |
| *out_mad = *in_mad; |
| if (pmp->class_version != 1) { |
| pmp->status |= IB_SMP_UNSUP_VERSION; |
| ret = reply((struct ib_smp *) pmp); |
| goto bail; |
| } |
| |
| switch (pmp->method) { |
| case IB_MGMT_METHOD_GET: |
| switch (pmp->attr_id) { |
| case IB_PMA_CLASS_PORT_INFO: |
| ret = recv_pma_get_classportinfo(pmp); |
| goto bail; |
| case IB_PMA_PORT_SAMPLES_CONTROL: |
| ret = recv_pma_get_portsamplescontrol(pmp, ibdev, |
| port_num); |
| goto bail; |
| case IB_PMA_PORT_SAMPLES_RESULT: |
| ret = recv_pma_get_portsamplesresult(pmp, ibdev); |
| goto bail; |
| case IB_PMA_PORT_SAMPLES_RESULT_EXT: |
| ret = recv_pma_get_portsamplesresult_ext(pmp, |
| ibdev); |
| goto bail; |
| case IB_PMA_PORT_COUNTERS: |
| ret = recv_pma_get_portcounters(pmp, ibdev, |
| port_num); |
| goto bail; |
| case IB_PMA_PORT_COUNTERS_EXT: |
| ret = recv_pma_get_portcounters_ext(pmp, ibdev, |
| port_num); |
| goto bail; |
| default: |
| pmp->status |= IB_SMP_UNSUP_METH_ATTR; |
| ret = reply((struct ib_smp *) pmp); |
| goto bail; |
| } |
| |
| case IB_MGMT_METHOD_SET: |
| switch (pmp->attr_id) { |
| case IB_PMA_PORT_SAMPLES_CONTROL: |
| ret = recv_pma_set_portsamplescontrol(pmp, ibdev, |
| port_num); |
| goto bail; |
| case IB_PMA_PORT_COUNTERS: |
| ret = recv_pma_set_portcounters(pmp, ibdev, |
| port_num); |
| goto bail; |
| case IB_PMA_PORT_COUNTERS_EXT: |
| ret = recv_pma_set_portcounters_ext(pmp, ibdev, |
| port_num); |
| goto bail; |
| default: |
| pmp->status |= IB_SMP_UNSUP_METH_ATTR; |
| ret = reply((struct ib_smp *) pmp); |
| goto bail; |
| } |
| |
| case IB_MGMT_METHOD_GET_RESP: |
| /* |
| * The ib_mad module will call us to process responses |
| * before checking for other consumers. |
| * Just tell the caller to process it normally. |
| */ |
| ret = IB_MAD_RESULT_FAILURE; |
| goto bail; |
| default: |
| pmp->status |= IB_SMP_UNSUP_METHOD; |
| ret = reply((struct ib_smp *) pmp); |
| } |
| |
| bail: |
| return ret; |
| } |
| |
| /** |
| * ipath_process_mad - process an incoming MAD packet |
| * @ibdev: the infiniband device this packet came in on |
| * @mad_flags: MAD flags |
| * @port_num: the port number this packet came in on |
| * @in_wc: the work completion entry for this packet |
| * @in_grh: the global route header for this packet |
| * @in_mad: the incoming MAD |
| * @out_mad: any outgoing MAD reply |
| * |
| * Returns IB_MAD_RESULT_SUCCESS if this is a MAD that we are not |
| * interested in processing. |
| * |
| * Note that the verbs framework has already done the MAD sanity checks, |
| * and hop count/pointer updating for IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE |
| * MADs. |
| * |
| * This is called by the ib_mad module. |
| */ |
| int ipath_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num, |
| struct ib_wc *in_wc, struct ib_grh *in_grh, |
| struct ib_mad *in_mad, struct ib_mad *out_mad) |
| { |
| int ret; |
| |
| switch (in_mad->mad_hdr.mgmt_class) { |
| case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE: |
| case IB_MGMT_CLASS_SUBN_LID_ROUTED: |
| ret = process_subn(ibdev, mad_flags, port_num, |
| in_mad, out_mad); |
| goto bail; |
| case IB_MGMT_CLASS_PERF_MGMT: |
| ret = process_perf(ibdev, port_num, in_mad, out_mad); |
| goto bail; |
| default: |
| ret = IB_MAD_RESULT_SUCCESS; |
| } |
| |
| bail: |
| return ret; |
| } |