| /* |
| * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved. |
| * Authors: Carsten Langgaard <carstenl@mips.com> |
| * Maciej W. Rozycki <macro@mips.com> |
| * Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org> |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * SAA9730 ethernet driver. |
| * |
| * Changes: |
| * Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API |
| * (pci_driver). |
| * Conversion to spinlocks. |
| * Error handling fixes. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/delay.h> |
| #include <linux/etherdevice.h> |
| #include <linux/module.h> |
| #include <linux/skbuff.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| |
| #include <asm/addrspace.h> |
| #include <asm/io.h> |
| |
| #include <asm/mips-boards/prom.h> |
| |
| #include "saa9730.h" |
| |
| #ifdef LAN_SAA9730_DEBUG |
| int lan_saa9730_debug = LAN_SAA9730_DEBUG; |
| #else |
| int lan_saa9730_debug; |
| #endif |
| |
| #define DRV_MODULE_NAME "saa9730" |
| |
| static struct pci_device_id saa9730_pci_tbl[] = { |
| { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl); |
| |
| /* Non-zero only if the current card is a PCI with BIOS-set IRQ. */ |
| static unsigned int pci_irq_line; |
| |
| static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp) |
| { |
| writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT, |
| &lp->evm_saa9730_regs->InterruptBlock1); |
| writel(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT, |
| &lp->evm_saa9730_regs->InterruptStatus1); |
| writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT | |
| EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1); |
| } |
| |
| static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp) |
| { |
| writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT, |
| &lp->evm_saa9730_regs->InterruptBlock1); |
| writel(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT, |
| &lp->evm_saa9730_regs->InterruptEnable1); |
| } |
| |
| static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp) |
| { |
| writel(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1); |
| } |
| |
| static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp) |
| { |
| writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT, |
| &lp->evm_saa9730_regs->InterruptBlock1); |
| } |
| |
| static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp) |
| { |
| writel(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT, |
| &lp->evm_saa9730_regs->InterruptBlock1); |
| } |
| |
| static void __attribute_used__ show_saa9730_regs(struct lan_saa9730_private *lp) |
| { |
| int i, j; |
| printk("TxmBufferA = %p\n", lp->TxmBuffer[0][0]); |
| printk("TxmBufferB = %p\n", lp->TxmBuffer[1][0]); |
| printk("RcvBufferA = %p\n", lp->RcvBuffer[0][0]); |
| printk("RcvBufferB = %p\n", lp->RcvBuffer[1][0]); |
| for (i = 0; i < LAN_SAA9730_BUFFERS; i++) { |
| for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) { |
| printk("TxmBuffer[%d][%d] = %x\n", i, j, |
| le32_to_cpu(*(unsigned int *) |
| lp->TxmBuffer[i][j])); |
| } |
| } |
| for (i = 0; i < LAN_SAA9730_BUFFERS; i++) { |
| for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) { |
| printk("RcvBuffer[%d][%d] = %x\n", i, j, |
| le32_to_cpu(*(unsigned int *) |
| lp->RcvBuffer[i][j])); |
| } |
| } |
| printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n", |
| readl(&lp->evm_saa9730_regs->InterruptBlock1)); |
| printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n", |
| readl(&lp->evm_saa9730_regs->InterruptStatus1)); |
| printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n", |
| readl(&lp->evm_saa9730_regs->InterruptEnable1)); |
| printk("lp->lan_saa9730_regs->Ok2Use = %x\n", |
| readl(&lp->lan_saa9730_regs->Ok2Use)); |
| printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex); |
| printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex); |
| printk("lp->PendingTxmBufferIndex = %x\n", |
| lp->PendingTxmBufferIndex); |
| printk("lp->PendingTxmPacketIndex = %x\n", |
| lp->PendingTxmPacketIndex); |
| printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n", |
| readl(&lp->lan_saa9730_regs->LanDmaCtl)); |
| printk("lp->lan_saa9730_regs->DmaStatus = %x\n", |
| readl(&lp->lan_saa9730_regs->DmaStatus)); |
| printk("lp->lan_saa9730_regs->CamCtl = %x\n", |
| readl(&lp->lan_saa9730_regs->CamCtl)); |
| printk("lp->lan_saa9730_regs->TxCtl = %x\n", |
| readl(&lp->lan_saa9730_regs->TxCtl)); |
| printk("lp->lan_saa9730_regs->TxStatus = %x\n", |
| readl(&lp->lan_saa9730_regs->TxStatus)); |
| printk("lp->lan_saa9730_regs->RxCtl = %x\n", |
| readl(&lp->lan_saa9730_regs->RxCtl)); |
| printk("lp->lan_saa9730_regs->RxStatus = %x\n", |
| readl(&lp->lan_saa9730_regs->RxStatus)); |
| for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) { |
| writel(i, &lp->lan_saa9730_regs->CamAddress); |
| printk("lp->lan_saa9730_regs->CamData = %x\n", |
| readl(&lp->lan_saa9730_regs->CamData)); |
| } |
| printk("lp->stats.tx_packets = %lx\n", lp->stats.tx_packets); |
| printk("lp->stats.tx_errors = %lx\n", lp->stats.tx_errors); |
| printk("lp->stats.tx_aborted_errors = %lx\n", |
| lp->stats.tx_aborted_errors); |
| printk("lp->stats.tx_window_errors = %lx\n", |
| lp->stats.tx_window_errors); |
| printk("lp->stats.tx_carrier_errors = %lx\n", |
| lp->stats.tx_carrier_errors); |
| printk("lp->stats.tx_fifo_errors = %lx\n", |
| lp->stats.tx_fifo_errors); |
| printk("lp->stats.tx_heartbeat_errors = %lx\n", |
| lp->stats.tx_heartbeat_errors); |
| printk("lp->stats.collisions = %lx\n", lp->stats.collisions); |
| |
| printk("lp->stats.rx_packets = %lx\n", lp->stats.rx_packets); |
| printk("lp->stats.rx_errors = %lx\n", lp->stats.rx_errors); |
| printk("lp->stats.rx_dropped = %lx\n", lp->stats.rx_dropped); |
| printk("lp->stats.rx_crc_errors = %lx\n", lp->stats.rx_crc_errors); |
| printk("lp->stats.rx_frame_errors = %lx\n", |
| lp->stats.rx_frame_errors); |
| printk("lp->stats.rx_fifo_errors = %lx\n", |
| lp->stats.rx_fifo_errors); |
| printk("lp->stats.rx_length_errors = %lx\n", |
| lp->stats.rx_length_errors); |
| |
| printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n", |
| readl(&lp->lan_saa9730_regs->DebugPCIMasterAddr)); |
| printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n", |
| readl(&lp->lan_saa9730_regs->DebugLanTxStateMachine)); |
| printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n", |
| readl(&lp->lan_saa9730_regs->DebugLanRxStateMachine)); |
| printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n", |
| readl(&lp->lan_saa9730_regs->DebugLanTxFifoPointers)); |
| printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n", |
| readl(&lp->lan_saa9730_regs->DebugLanRxFifoPointers)); |
| printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n", |
| readl(&lp->lan_saa9730_regs->DebugLanCtlStateMachine)); |
| } |
| |
| static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp) |
| { |
| int i, j; |
| |
| /* Init RX buffers */ |
| for (i = 0; i < LAN_SAA9730_BUFFERS; i++) { |
| for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) { |
| *(unsigned int *) lp->RcvBuffer[i][j] = |
| cpu_to_le32(RXSF_READY << |
| RX_STAT_CTL_OWNER_SHF); |
| } |
| } |
| |
| /* Init TX buffers */ |
| for (i = 0; i < LAN_SAA9730_BUFFERS; i++) { |
| for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) { |
| *(unsigned int *) lp->TxmBuffer[i][j] = |
| cpu_to_le32(TXSF_EMPTY << |
| TX_STAT_CTL_OWNER_SHF); |
| } |
| } |
| } |
| |
| static void lan_saa9730_free_buffers(struct pci_dev *pdev, |
| struct lan_saa9730_private *lp) |
| { |
| pci_free_consistent(pdev, lp->buffer_size, lp->buffer_start, |
| lp->dma_addr); |
| } |
| |
| static int lan_saa9730_allocate_buffers(struct pci_dev *pdev, |
| struct lan_saa9730_private *lp) |
| { |
| void *Pa; |
| unsigned int i, j, rxoffset, txoffset; |
| int ret; |
| |
| /* Initialize buffer space */ |
| lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE; |
| lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE; |
| |
| /* Initialize Rx Buffer Index */ |
| lp->NextRcvPacketIndex = 0; |
| lp->NextRcvBufferIndex = 0; |
| |
| /* Set current buffer index & next available packet index */ |
| lp->NextTxmPacketIndex = 0; |
| lp->NextTxmBufferIndex = 0; |
| lp->PendingTxmPacketIndex = 0; |
| lp->PendingTxmBufferIndex = 0; |
| |
| /* |
| * Allocate all RX and TX packets in one chunk. |
| * The Rx and Tx packets must be PACKET_SIZE aligned. |
| */ |
| lp->buffer_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) * |
| LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) + |
| LAN_SAA9730_PACKET_SIZE; |
| lp->buffer_start = pci_alloc_consistent(pdev, lp->buffer_size, |
| &lp->dma_addr); |
| if (!lp->buffer_start) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| Pa = (void *)ALIGN((unsigned long)lp->buffer_start, |
| LAN_SAA9730_PACKET_SIZE); |
| |
| rxoffset = Pa - lp->buffer_start; |
| |
| /* Init RX buffers */ |
| for (i = 0; i < LAN_SAA9730_BUFFERS; i++) { |
| for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) { |
| *(unsigned int *) Pa = |
| cpu_to_le32(RXSF_READY << |
| RX_STAT_CTL_OWNER_SHF); |
| lp->RcvBuffer[i][j] = Pa; |
| Pa += LAN_SAA9730_PACKET_SIZE; |
| } |
| } |
| |
| txoffset = Pa - lp->buffer_start; |
| |
| /* Init TX buffers */ |
| for (i = 0; i < LAN_SAA9730_BUFFERS; i++) { |
| for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) { |
| *(unsigned int *) Pa = |
| cpu_to_le32(TXSF_EMPTY << |
| TX_STAT_CTL_OWNER_SHF); |
| lp->TxmBuffer[i][j] = Pa; |
| Pa += LAN_SAA9730_PACKET_SIZE; |
| } |
| } |
| |
| /* |
| * Set rx buffer A and rx buffer B to point to the first two buffer |
| * spaces. |
| */ |
| writel(lp->dma_addr + rxoffset, &lp->lan_saa9730_regs->RxBuffA); |
| writel(lp->dma_addr + rxoffset + |
| LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE, |
| &lp->lan_saa9730_regs->RxBuffB); |
| |
| /* |
| * Set txm_buf_a and txm_buf_b to point to the first two buffer |
| * space |
| */ |
| writel(lp->dma_addr + txoffset, |
| &lp->lan_saa9730_regs->TxBuffA); |
| writel(lp->dma_addr + txoffset + |
| LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE, |
| &lp->lan_saa9730_regs->TxBuffB); |
| |
| /* Set packet number */ |
| writel((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) | |
| (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) | |
| (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) | |
| (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF), |
| &lp->lan_saa9730_regs->PacketCount); |
| |
| return 0; |
| |
| out: |
| return ret; |
| } |
| |
| static int lan_saa9730_cam_load(struct lan_saa9730_private *lp) |
| { |
| unsigned int i; |
| unsigned char *NetworkAddress; |
| |
| NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0]; |
| |
| for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) { |
| /* First set address to where data is written */ |
| writel(i, &lp->lan_saa9730_regs->CamAddress); |
| writel((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16) | |
| (NetworkAddress[2] << 8) | NetworkAddress[3], |
| &lp->lan_saa9730_regs->CamData); |
| NetworkAddress += 4; |
| } |
| return 0; |
| } |
| |
| static int lan_saa9730_cam_init(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| unsigned int i; |
| |
| /* Copy MAC-address into all entries. */ |
| for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) { |
| memcpy((unsigned char *) lp->PhysicalAddress[i], |
| (unsigned char *) dev->dev_addr, 6); |
| } |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_mii_init(struct lan_saa9730_private *lp) |
| { |
| int i, l; |
| |
| /* Check link status, spin here till station is not busy. */ |
| i = 0; |
| while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) { |
| i++; |
| if (i > 100) { |
| printk("Error: lan_saa9730_mii_init: timeout\n"); |
| return -1; |
| } |
| mdelay(1); /* wait 1 ms. */ |
| } |
| |
| /* Now set the control and address register. */ |
| writel(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF, |
| &lp->lan_saa9730_regs->StationMgmtCtl); |
| |
| /* check link status, spin here till station is not busy */ |
| i = 0; |
| while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) { |
| i++; |
| if (i > 100) { |
| printk("Error: lan_saa9730_mii_init: timeout\n"); |
| return -1; |
| } |
| mdelay(1); /* wait 1 ms. */ |
| } |
| |
| /* Wait for 1 ms. */ |
| mdelay(1); |
| |
| /* Check the link status. */ |
| if (readl(&lp->lan_saa9730_regs->StationMgmtData) & |
| PHY_STATUS_LINK_UP) { |
| /* Link is up. */ |
| return 0; |
| } else { |
| /* Link is down, reset the PHY first. */ |
| |
| /* set PHY address = 'CONTROL' */ |
| writel(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL, |
| &lp->lan_saa9730_regs->StationMgmtCtl); |
| |
| /* Wait for 1 ms. */ |
| mdelay(1); |
| |
| /* set 'CONTROL' = force reset and renegotiate */ |
| writel(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG | |
| PHY_CONTROL_RESTART_AUTO_NEG, |
| &lp->lan_saa9730_regs->StationMgmtData); |
| |
| /* Wait for 50 ms. */ |
| mdelay(50); |
| |
| /* set 'BUSY' to start operation */ |
| writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | |
| PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl); |
| |
| /* await completion */ |
| i = 0; |
| while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & |
| MD_CA_BUSY) { |
| i++; |
| if (i > 100) { |
| printk |
| ("Error: lan_saa9730_mii_init: timeout\n"); |
| return -1; |
| } |
| mdelay(1); /* wait 1 ms. */ |
| } |
| |
| /* Wait for 1 ms. */ |
| mdelay(1); |
| |
| for (l = 0; l < 2; l++) { |
| /* set PHY address = 'STATUS' */ |
| writel(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | |
| PHY_STATUS, |
| &lp->lan_saa9730_regs->StationMgmtCtl); |
| |
| /* await completion */ |
| i = 0; |
| while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & |
| MD_CA_BUSY) { |
| i++; |
| if (i > 100) { |
| printk |
| ("Error: lan_saa9730_mii_init: timeout\n"); |
| return -1; |
| } |
| mdelay(1); /* wait 1 ms. */ |
| } |
| |
| /* wait for 3 sec. */ |
| mdelay(3000); |
| |
| /* check the link status */ |
| if (readl(&lp->lan_saa9730_regs->StationMgmtData) & |
| PHY_STATUS_LINK_UP) { |
| /* link is up */ |
| break; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_control_init(struct lan_saa9730_private *lp) |
| { |
| /* Initialize DMA control register. */ |
| writel((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) | |
| (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) | |
| (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF) |
| | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN | |
| DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN, |
| &lp->lan_saa9730_regs->LanDmaCtl); |
| |
| /* Initial MAC control register. */ |
| writel((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP, |
| &lp->lan_saa9730_regs->MacCtl); |
| |
| /* Initialize CAM control register. */ |
| writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC, |
| &lp->lan_saa9730_regs->CamCtl); |
| |
| /* |
| * Initialize CAM enable register, only turn on first entry, should |
| * contain own addr. |
| */ |
| writel(0x0001, &lp->lan_saa9730_regs->CamEnable); |
| |
| /* Initialize Tx control register */ |
| writel(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl); |
| |
| /* Initialize Rcv control register */ |
| writel(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl); |
| |
| /* Reset DMA engine */ |
| writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_stop(struct lan_saa9730_private *lp) |
| { |
| int i; |
| |
| /* Stop DMA first */ |
| writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) & |
| ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA), |
| &lp->lan_saa9730_regs->LanDmaCtl); |
| |
| /* Set the SW Reset bits in DMA and MAC control registers */ |
| writel(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest); |
| writel(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET, |
| &lp->lan_saa9730_regs->MacCtl); |
| |
| /* |
| * Wait for MAC reset to have finished. The reset bit is auto cleared |
| * when the reset is done. |
| */ |
| i = 0; |
| while (readl(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) { |
| i++; |
| if (i > 100) { |
| printk |
| ("Error: lan_sa9730_stop: MAC reset timeout\n"); |
| return -1; |
| } |
| mdelay(1); /* wait 1 ms. */ |
| } |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_dma_init(struct lan_saa9730_private *lp) |
| { |
| /* Stop lan controller. */ |
| lan_saa9730_stop(lp); |
| |
| writel(LAN_SAA9730_DEFAULT_TIME_OUT_CNT, |
| &lp->lan_saa9730_regs->Timeout); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_start(struct lan_saa9730_private *lp) |
| { |
| lan_saa9730_buffer_init(lp); |
| |
| /* Initialize Rx Buffer Index */ |
| lp->NextRcvPacketIndex = 0; |
| lp->NextRcvBufferIndex = 0; |
| |
| /* Set current buffer index & next available packet index */ |
| lp->NextTxmPacketIndex = 0; |
| lp->NextTxmBufferIndex = 0; |
| lp->PendingTxmPacketIndex = 0; |
| lp->PendingTxmBufferIndex = 0; |
| |
| writel(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA | |
| DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl); |
| |
| /* For Tx, turn on MAC then DMA */ |
| writel(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN, |
| &lp->lan_saa9730_regs->TxCtl); |
| |
| /* For Rx, turn on DMA then MAC */ |
| writel(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN, |
| &lp->lan_saa9730_regs->RxCtl); |
| |
| /* Set Ok2Use to let hardware own the buffers. */ |
| writel(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_restart(struct lan_saa9730_private *lp) |
| { |
| lan_saa9730_stop(lp); |
| lan_saa9730_start(lp); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_tx(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| unsigned int *pPacket; |
| unsigned int tx_status; |
| |
| if (lan_saa9730_debug > 5) |
| printk("lan_saa9730_tx interrupt\n"); |
| |
| /* Clear interrupt. */ |
| writel(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus); |
| |
| while (1) { |
| pPacket = lp->TxmBuffer[lp->PendingTxmBufferIndex] |
| [lp->PendingTxmPacketIndex]; |
| |
| /* Get status of first packet transmitted. */ |
| tx_status = le32_to_cpu(*pPacket); |
| |
| /* Check ownership. */ |
| if ((tx_status & TX_STAT_CTL_OWNER_MSK) != |
| (TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break; |
| |
| /* Check for error. */ |
| if (tx_status & TX_STAT_CTL_ERROR_MSK) { |
| if (lan_saa9730_debug > 1) |
| printk("lan_saa9730_tx: tx error = %x\n", |
| tx_status); |
| |
| lp->stats.tx_errors++; |
| if (tx_status & |
| (TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF)) |
| lp->stats.tx_aborted_errors++; |
| if (tx_status & |
| (TX_STATUS_LATE_COLL << TX_STAT_CTL_STATUS_SHF)) |
| lp->stats.tx_window_errors++; |
| if (tx_status & |
| (TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF)) |
| lp->stats.tx_carrier_errors++; |
| if (tx_status & |
| (TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF)) |
| lp->stats.tx_fifo_errors++; |
| if (tx_status & |
| (TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF)) |
| lp->stats.tx_heartbeat_errors++; |
| |
| lp->stats.collisions += |
| tx_status & TX_STATUS_TX_COLL_MSK; |
| } |
| |
| /* Free buffer. */ |
| *pPacket = |
| cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF); |
| |
| /* Update pending index pointer. */ |
| lp->PendingTxmPacketIndex++; |
| if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) { |
| lp->PendingTxmPacketIndex = 0; |
| lp->PendingTxmBufferIndex ^= 1; |
| } |
| } |
| |
| /* The tx buffer is no longer full. */ |
| netif_wake_queue(dev); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_rx(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| int len = 0; |
| struct sk_buff *skb = 0; |
| unsigned int rx_status; |
| int BufferIndex; |
| int PacketIndex; |
| unsigned int *pPacket; |
| unsigned char *pData; |
| |
| if (lan_saa9730_debug > 5) |
| printk("lan_saa9730_rx interrupt\n"); |
| |
| /* Clear receive interrupts. */ |
| writel(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT | |
| DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus); |
| |
| /* Address next packet */ |
| BufferIndex = lp->NextRcvBufferIndex; |
| PacketIndex = lp->NextRcvPacketIndex; |
| pPacket = lp->RcvBuffer[BufferIndex][PacketIndex]; |
| rx_status = le32_to_cpu(*pPacket); |
| |
| /* Process each packet. */ |
| while ((rx_status & RX_STAT_CTL_OWNER_MSK) == |
| (RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) { |
| /* Check the rx status. */ |
| if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) { |
| /* Received packet is good. */ |
| len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >> |
| RX_STAT_CTL_LENGTH_SHF; |
| |
| pData = (unsigned char *) pPacket; |
| pData += 4; |
| skb = dev_alloc_skb(len + 2); |
| if (skb == 0) { |
| printk |
| ("%s: Memory squeeze, deferring packet.\n", |
| dev->name); |
| lp->stats.rx_dropped++; |
| } else { |
| lp->stats.rx_bytes += len; |
| lp->stats.rx_packets++; |
| skb_reserve(skb, 2); /* 16 byte align */ |
| skb_put(skb, len); /* make room */ |
| skb_copy_to_linear_data(skb, |
| (unsigned char *) pData, |
| len); |
| skb->protocol = eth_type_trans(skb, dev); |
| netif_rx(skb); |
| dev->last_rx = jiffies; |
| } |
| } else { |
| /* We got an error packet. */ |
| if (lan_saa9730_debug > 2) |
| printk |
| ("lan_saa9730_rx: We got an error packet = %x\n", |
| rx_status); |
| |
| lp->stats.rx_errors++; |
| if (rx_status & |
| (RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF)) |
| lp->stats.rx_crc_errors++; |
| if (rx_status & |
| (RX_STATUS_ALIGN_ERR << RX_STAT_CTL_STATUS_SHF)) |
| lp->stats.rx_frame_errors++; |
| if (rx_status & |
| (RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF)) |
| lp->stats.rx_fifo_errors++; |
| if (rx_status & |
| (RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF)) |
| lp->stats.rx_length_errors++; |
| } |
| |
| /* Indicate we have processed the buffer. */ |
| *pPacket = cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF); |
| |
| /* Make sure A or B is available to hardware as appropriate. */ |
| writel(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A, |
| &lp->lan_saa9730_regs->Ok2Use); |
| |
| /* Go to next packet in sequence. */ |
| lp->NextRcvPacketIndex++; |
| if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) { |
| lp->NextRcvPacketIndex = 0; |
| lp->NextRcvBufferIndex ^= 1; |
| } |
| |
| /* Address next packet */ |
| BufferIndex = lp->NextRcvBufferIndex; |
| PacketIndex = lp->NextRcvPacketIndex; |
| pPacket = lp->RcvBuffer[BufferIndex][PacketIndex]; |
| rx_status = le32_to_cpu(*pPacket); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| if (lan_saa9730_debug > 5) |
| printk("lan_saa9730_interrupt\n"); |
| |
| /* Disable the EVM LAN interrupt. */ |
| evm_saa9730_block_lan_int(lp); |
| |
| /* Clear the EVM LAN interrupt. */ |
| evm_saa9730_clear_lan_int(lp); |
| |
| /* Service pending transmit interrupts. */ |
| if (readl(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT) |
| lan_saa9730_tx(dev); |
| |
| /* Service pending receive interrupts. */ |
| if (readl(&lp->lan_saa9730_regs->DmaStatus) & |
| (DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT | |
| DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev); |
| |
| /* Enable the EVM LAN interrupt. */ |
| evm_saa9730_unblock_lan_int(lp); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int lan_saa9730_open(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| /* Associate IRQ with lan_saa9730_interrupt */ |
| if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth", |
| dev)) { |
| printk("lan_saa9730_open: Can't get irq %d\n", dev->irq); |
| return -EAGAIN; |
| } |
| |
| /* Enable the Lan interrupt in the event manager. */ |
| evm_saa9730_enable_lan_int(lp); |
| |
| /* Start the LAN controller */ |
| if (lan_saa9730_start(lp)) |
| return -1; |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_write(struct lan_saa9730_private *lp, |
| struct sk_buff *skb, int skblen) |
| { |
| unsigned char *pbData = skb->data; |
| unsigned int len = skblen; |
| unsigned char *pbPacketData; |
| unsigned int tx_status; |
| int BufferIndex; |
| int PacketIndex; |
| |
| if (lan_saa9730_debug > 5) |
| printk("lan_saa9730_write: skb=%p\n", skb); |
| |
| BufferIndex = lp->NextTxmBufferIndex; |
| PacketIndex = lp->NextTxmPacketIndex; |
| |
| tx_status = le32_to_cpu(*(unsigned int *)lp->TxmBuffer[BufferIndex] |
| [PacketIndex]); |
| if ((tx_status & TX_STAT_CTL_OWNER_MSK) != |
| (TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) { |
| if (lan_saa9730_debug > 4) |
| printk |
| ("lan_saa9730_write: Tx buffer not available: tx_status = %x\n", |
| tx_status); |
| return -1; |
| } |
| |
| lp->NextTxmPacketIndex++; |
| if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) { |
| lp->NextTxmPacketIndex = 0; |
| lp->NextTxmBufferIndex ^= 1; |
| } |
| |
| pbPacketData = lp->TxmBuffer[BufferIndex][PacketIndex]; |
| pbPacketData += 4; |
| |
| /* copy the bits */ |
| memcpy(pbPacketData, pbData, len); |
| |
| /* Set transmit status for hardware */ |
| *(unsigned int *)lp->TxmBuffer[BufferIndex][PacketIndex] = |
| cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) | |
| (TX_STAT_CTL_INT_AFTER_TX << |
| TX_STAT_CTL_FRAME_SHF) | |
| (len << TX_STAT_CTL_LENGTH_SHF)); |
| |
| /* Make sure A or B is available to hardware as appropriate. */ |
| writel(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A, |
| &lp->lan_saa9730_regs->Ok2Use); |
| |
| return 0; |
| } |
| |
| static void lan_saa9730_tx_timeout(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| /* Transmitter timeout, serious problems */ |
| lp->stats.tx_errors++; |
| printk("%s: transmit timed out, reset\n", dev->name); |
| /*show_saa9730_regs(lp); */ |
| lan_saa9730_restart(lp); |
| |
| dev->trans_start = jiffies; |
| netif_wake_queue(dev); |
| } |
| |
| static int lan_saa9730_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| unsigned long flags; |
| int skblen; |
| int len; |
| |
| if (lan_saa9730_debug > 4) |
| printk("Send packet: skb=%p\n", skb); |
| |
| skblen = skb->len; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen; |
| |
| if (lan_saa9730_write(lp, skb, skblen)) { |
| spin_unlock_irqrestore(&lp->lock, flags); |
| printk("Error when writing packet to controller: skb=%p\n", skb); |
| netif_stop_queue(dev); |
| return -1; |
| } |
| |
| lp->stats.tx_bytes += len; |
| lp->stats.tx_packets++; |
| |
| dev->trans_start = jiffies; |
| netif_wake_queue(dev); |
| dev_kfree_skb(skb); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return 0; |
| } |
| |
| static int lan_saa9730_close(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| if (lan_saa9730_debug > 1) |
| printk("lan_saa9730_close:\n"); |
| |
| netif_stop_queue(dev); |
| |
| /* Disable the Lan interrupt in the event manager. */ |
| evm_saa9730_disable_lan_int(lp); |
| |
| /* Stop the controller */ |
| if (lan_saa9730_stop(lp)) |
| return -1; |
| |
| free_irq(dev->irq, (void *) dev); |
| |
| return 0; |
| } |
| |
| static struct net_device_stats *lan_saa9730_get_stats(struct net_device |
| *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| return &lp->stats; |
| } |
| |
| static void lan_saa9730_set_multicast(struct net_device *dev) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| /* Stop the controller */ |
| lan_saa9730_stop(lp); |
| |
| if (dev->flags & IFF_PROMISC) { |
| /* accept all packets */ |
| writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC | |
| CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC, |
| &lp->lan_saa9730_regs->CamCtl); |
| } else { |
| if (dev->flags & IFF_ALLMULTI) { |
| /* accept all multicast packets */ |
| writel(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC | |
| CAM_CONTROL_BROAD_ACC, |
| &lp->lan_saa9730_regs->CamCtl); |
| } else { |
| /* |
| * Will handle the multicast stuff later. -carstenl |
| */ |
| } |
| } |
| |
| lan_saa9730_restart(lp); |
| } |
| |
| |
| static void __devexit saa9730_remove_one(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| |
| if (dev) { |
| unregister_netdev(dev); |
| lan_saa9730_free_buffers(pdev, lp); |
| iounmap(lp->lan_saa9730_regs); |
| iounmap(lp->evm_saa9730_regs); |
| free_netdev(dev); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| } |
| |
| |
| static int lan_saa9730_init(struct net_device *dev, struct pci_dev *pdev, |
| unsigned long ioaddr, int irq) |
| { |
| struct lan_saa9730_private *lp = netdev_priv(dev); |
| unsigned char ethernet_addr[6]; |
| int ret; |
| |
| if (get_ethernet_addr(ethernet_addr)) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| memcpy(dev->dev_addr, ethernet_addr, 6); |
| dev->base_addr = ioaddr; |
| dev->irq = irq; |
| |
| lp->pci_dev = pdev; |
| |
| /* Set SAA9730 LAN base address. */ |
| lp->lan_saa9730_regs = ioremap(ioaddr + SAA9730_LAN_REGS_ADDR, |
| SAA9730_LAN_REGS_SIZE); |
| if (!lp->lan_saa9730_regs) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Set SAA9730 EVM base address. */ |
| lp->evm_saa9730_regs = ioremap(ioaddr + SAA9730_EVM_REGS_ADDR, |
| SAA9730_EVM_REGS_SIZE); |
| if (!lp->evm_saa9730_regs) { |
| ret = -ENOMEM; |
| goto out_iounmap_lan; |
| } |
| |
| /* Allocate LAN RX/TX frame buffer space. */ |
| if ((ret = lan_saa9730_allocate_buffers(pdev, lp))) |
| goto out_iounmap; |
| |
| /* Stop LAN controller. */ |
| if ((ret = lan_saa9730_stop(lp))) |
| goto out_free_consistent; |
| |
| /* Initialize CAM registers. */ |
| if ((ret = lan_saa9730_cam_init(dev))) |
| goto out_free_consistent; |
| |
| /* Initialize MII registers. */ |
| if ((ret = lan_saa9730_mii_init(lp))) |
| goto out_free_consistent; |
| |
| /* Initialize control registers. */ |
| if ((ret = lan_saa9730_control_init(lp))) |
| goto out_free_consistent; |
| |
| /* Load CAM registers. */ |
| if ((ret = lan_saa9730_cam_load(lp))) |
| goto out_free_consistent; |
| |
| /* Initialize DMA context registers. */ |
| if ((ret = lan_saa9730_dma_init(lp))) |
| goto out_free_consistent; |
| |
| spin_lock_init(&lp->lock); |
| |
| dev->open = lan_saa9730_open; |
| dev->hard_start_xmit = lan_saa9730_start_xmit; |
| dev->stop = lan_saa9730_close; |
| dev->get_stats = lan_saa9730_get_stats; |
| dev->set_multicast_list = lan_saa9730_set_multicast; |
| dev->tx_timeout = lan_saa9730_tx_timeout; |
| dev->watchdog_timeo = (HZ >> 1); |
| dev->dma = 0; |
| |
| ret = register_netdev (dev); |
| if (ret) |
| goto out_free_consistent; |
| |
| return 0; |
| |
| out_free_consistent: |
| lan_saa9730_free_buffers(pdev, lp); |
| out_iounmap: |
| iounmap(lp->evm_saa9730_regs); |
| out_iounmap_lan: |
| iounmap(lp->lan_saa9730_regs); |
| out: |
| return ret; |
| } |
| |
| |
| static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct net_device *dev = NULL; |
| unsigned long pci_ioaddr; |
| int err; |
| |
| if (lan_saa9730_debug > 1) |
| printk("saa9730.c: PCI bios is present, checking for devices...\n"); |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| printk(KERN_ERR "Cannot enable PCI device, aborting.\n"); |
| goto out; |
| } |
| |
| err = pci_request_regions(pdev, DRV_MODULE_NAME); |
| if (err) { |
| printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n"); |
| goto out_disable_pdev; |
| } |
| |
| pci_irq_line = pdev->irq; |
| /* LAN base address in located at BAR 1. */ |
| |
| pci_ioaddr = pci_resource_start(pdev, 1); |
| pci_set_master(pdev); |
| |
| printk("Found SAA9730 (PCI) at %lx, irq %d.\n", |
| pci_ioaddr, pci_irq_line); |
| |
| dev = alloc_etherdev(sizeof(struct lan_saa9730_private)); |
| if (!dev) |
| goto out_disable_pdev; |
| |
| err = lan_saa9730_init(dev, pdev, pci_ioaddr, pci_irq_line); |
| if (err) { |
| printk("LAN init failed"); |
| goto out_free_netdev; |
| } |
| |
| pci_set_drvdata(pdev, dev); |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| return 0; |
| |
| out_free_netdev: |
| free_netdev(dev); |
| out_disable_pdev: |
| pci_disable_device(pdev); |
| out: |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| |
| static struct pci_driver saa9730_driver = { |
| .name = DRV_MODULE_NAME, |
| .id_table = saa9730_pci_tbl, |
| .probe = saa9730_init_one, |
| .remove = __devexit_p(saa9730_remove_one), |
| }; |
| |
| |
| static int __init saa9730_init(void) |
| { |
| return pci_register_driver(&saa9730_driver); |
| } |
| |
| static void __exit saa9730_cleanup(void) |
| { |
| pci_unregister_driver(&saa9730_driver); |
| } |
| |
| module_init(saa9730_init); |
| module_exit(saa9730_cleanup); |
| |
| MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); |
| MODULE_DESCRIPTION("Philips SAA9730 ethernet driver"); |
| MODULE_LICENSE("GPL"); |