| * Clock bindings for Freescale i.MX6 Quad |
| |
| Required properties: |
| - compatible: Should be "fsl,imx6q-ccm" |
| - reg: Address and length of the register set |
| - interrupts: Should contain CCM interrupt |
| - #clock-cells: Should be <1> |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. The following is a full list of i.MX6Q |
| clocks and IDs. |
| |
| Clock ID |
| --------------------------- |
| dummy 0 |
| ckil 1 |
| ckih 2 |
| osc 3 |
| pll2_pfd0_352m 4 |
| pll2_pfd1_594m 5 |
| pll2_pfd2_396m 6 |
| pll3_pfd0_720m 7 |
| pll3_pfd1_540m 8 |
| pll3_pfd2_508m 9 |
| pll3_pfd3_454m 10 |
| pll2_198m 11 |
| pll3_120m 12 |
| pll3_80m 13 |
| pll3_60m 14 |
| twd 15 |
| step 16 |
| pll1_sw 17 |
| periph_pre 18 |
| periph2_pre 19 |
| periph_clk2_sel 20 |
| periph2_clk2_sel 21 |
| axi_sel 22 |
| esai_sel 23 |
| asrc_sel 24 |
| spdif_sel 25 |
| gpu2d_axi 26 |
| gpu3d_axi 27 |
| gpu2d_core_sel 28 |
| gpu3d_core_sel 29 |
| gpu3d_shader_sel 30 |
| ipu1_sel 31 |
| ipu2_sel 32 |
| ldb_di0_sel 33 |
| ldb_di1_sel 34 |
| ipu1_di0_pre_sel 35 |
| ipu1_di1_pre_sel 36 |
| ipu2_di0_pre_sel 37 |
| ipu2_di1_pre_sel 38 |
| ipu1_di0_sel 39 |
| ipu1_di1_sel 40 |
| ipu2_di0_sel 41 |
| ipu2_di1_sel 42 |
| hsi_tx_sel 43 |
| pcie_axi_sel 44 |
| ssi1_sel 45 |
| ssi2_sel 46 |
| ssi3_sel 47 |
| usdhc1_sel 48 |
| usdhc2_sel 49 |
| usdhc3_sel 50 |
| usdhc4_sel 51 |
| enfc_sel 52 |
| emi_sel 53 |
| emi_slow_sel 54 |
| vdo_axi_sel 55 |
| vpu_axi_sel 56 |
| cko1_sel 57 |
| periph 58 |
| periph2 59 |
| periph_clk2 60 |
| periph2_clk2 61 |
| ipg 62 |
| ipg_per 63 |
| esai_pred 64 |
| esai_podf 65 |
| asrc_pred 66 |
| asrc_podf 67 |
| spdif_pred 68 |
| spdif_podf 69 |
| can_root 70 |
| ecspi_root 71 |
| gpu2d_core_podf 72 |
| gpu3d_core_podf 73 |
| gpu3d_shader 74 |
| ipu1_podf 75 |
| ipu2_podf 76 |
| ldb_di0_podf 77 |
| ldb_di1_podf 78 |
| ipu1_di0_pre 79 |
| ipu1_di1_pre 80 |
| ipu2_di0_pre 81 |
| ipu2_di1_pre 82 |
| hsi_tx_podf 83 |
| ssi1_pred 84 |
| ssi1_podf 85 |
| ssi2_pred 86 |
| ssi2_podf 87 |
| ssi3_pred 88 |
| ssi3_podf 89 |
| uart_serial_podf 90 |
| usdhc1_podf 91 |
| usdhc2_podf 92 |
| usdhc3_podf 93 |
| usdhc4_podf 94 |
| enfc_pred 95 |
| enfc_podf 96 |
| emi_podf 97 |
| emi_slow_podf 98 |
| vpu_axi_podf 99 |
| cko1_podf 100 |
| axi 101 |
| mmdc_ch0_axi_podf 102 |
| mmdc_ch1_axi_podf 103 |
| arm 104 |
| ahb 105 |
| apbh_dma 106 |
| asrc 107 |
| can1_ipg 108 |
| can1_serial 109 |
| can2_ipg 110 |
| can2_serial 111 |
| ecspi1 112 |
| ecspi2 113 |
| ecspi3 114 |
| ecspi4 115 |
| ecspi5 116 |
| enet 117 |
| esai 118 |
| gpt_ipg 119 |
| gpt_ipg_per 120 |
| gpu2d_core 121 |
| gpu3d_core 122 |
| hdmi_iahb 123 |
| hdmi_isfr 124 |
| i2c1 125 |
| i2c2 126 |
| i2c3 127 |
| iim 128 |
| enfc 129 |
| ipu1 130 |
| ipu1_di0 131 |
| ipu1_di1 132 |
| ipu2 133 |
| ipu2_di0 134 |
| ldb_di0 135 |
| ldb_di1 136 |
| ipu2_di1 137 |
| hsi_tx 138 |
| mlb 139 |
| mmdc_ch0_axi 140 |
| mmdc_ch1_axi 141 |
| ocram 142 |
| openvg_axi 143 |
| pcie_axi 144 |
| pwm1 145 |
| pwm2 146 |
| pwm3 147 |
| pwm4 148 |
| per1_bch 149 |
| gpmi_bch_apb 150 |
| gpmi_bch 151 |
| gpmi_io 152 |
| gpmi_apb 153 |
| sata 154 |
| sdma 155 |
| spba 156 |
| ssi1 157 |
| ssi2 158 |
| ssi3 159 |
| uart_ipg 160 |
| uart_serial 161 |
| usboh3 162 |
| usdhc1 163 |
| usdhc2 164 |
| usdhc3 165 |
| usdhc4 166 |
| vdo_axi 167 |
| vpu_axi 168 |
| cko1 169 |
| pll1_sys 170 |
| pll2_bus 171 |
| pll3_usb_otg 172 |
| pll4_audio 173 |
| pll5_video 174 |
| pll8_mlb 175 |
| pll7_usb_host 176 |
| pll6_enet 177 |
| ssi1_ipg 178 |
| ssi2_ipg 179 |
| ssi3_ipg 180 |
| rom 181 |
| usbphy1 182 |
| usbphy2 183 |
| ldb_di0_div_3_5 184 |
| ldb_di1_div_3_5 185 |
| sata_ref 186 |
| sata_ref_100m 187 |
| pcie_ref 188 |
| pcie_ref_125m 189 |
| enet_ref 190 |
| usbphy1_gate 191 |
| usbphy2_gate 192 |
| pll4_post_div 193 |
| pll5_post_div 194 |
| pll5_video_div 195 |
| eim_slow 196 |
| spdif 197 |
| cko2_sel 198 |
| cko2_podf 199 |
| cko2 200 |
| cko 201 |
| vdoa 202 |
| pll4_audio_div 203 |
| lvds1_sel 204 |
| lvds2_sel 205 |
| lvds1_gate 206 |
| lvds2_gate 207 |
| esai_ahb 208 |
| |
| Examples: |
| |
| clks: ccm@020c4000 { |
| compatible = "fsl,imx6q-ccm"; |
| reg = <0x020c4000 0x4000>; |
| interrupts = <0 87 0x04 0 88 0x04>; |
| #clock-cells = <1>; |
| }; |
| |
| uart1: serial@02020000 { |
| compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x02020000 0x4000>; |
| interrupts = <0 26 0x04>; |
| clocks = <&clks 160>, <&clks 161>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
