| Binding for a ST multiplexed clock driver. |
| |
| This binding supports only simple indexed multiplexers, it does not |
| support table based parent index to hardware value translations. |
| |
| This binding uses the common clock binding[1]. |
| |
| [1] Documentation/devicetree/bindings/clock/clock-bindings.txt |
| |
| Required properties: |
| |
| - compatible : shall be: |
| "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux" |
| "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux" |
| "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux" |
| "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux" |
| "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux" |
| "st,stih415-clkgen-a9-mux", "st,clkgen-mux" |
| "st,stih416-clkgen-a9-mux", "st,clkgen-mux" |
| |
| |
| - #clock-cells : from common clock binding; shall be set to 0. |
| |
| - reg : A Base address and length of the register set. |
| |
| - clocks : from common clock binding |
| |
| Example: |
| |
| CLK_M_HVA: CLK_M_HVA { |
| #clock-cells = <0>; |
| compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; |
| reg = <0xfd690868 4>; |
| |
| clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>; |
| }; |
