blob: 9fff9cdcc5196c3a20b9129d7e407c1dbc113cb7 [file] [log] [blame]
/*
* Common time routines among all ppc machines.
*
* Written by Cort Dougan (cort@cs.nmt.edu) to merge
* Paul Mackerras' version and mine for PReP and Pmac.
* MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
* Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com)
*
* First round of bugfixes by Gabriel Paubert (paubert@iram.es)
* to make clock more stable (2.4.0-test5). The only thing
* that this code assumes is that the timebases have been synchronized
* by firmware on SMP and are never stopped (never do sleep
* on SMP then, nap and doze are OK).
*
* Speeded up do_gettimeofday by getting rid of references to
* xtime (which required locks for consistency). (mikejc@us.ibm.com)
*
* TODO (not necessarily in this file):
* - improve precision and reproducibility of timebase frequency
* measurement at boot time.
* - for astronomical applications: add a new function to get
* non ambiguous timestamps even around leap seconds. This needs
* a new timestamp format and a good name.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/kernel_stat.h>
#include <linux/time.h>
#include <linux/clockchips.h>
#include <linux/init.h>
#include <linux/profile.h>
#include <linux/cpu.h>
#include <linux/security.h>
#include <linux/percpu.h>
#include <linux/rtc.h>
#include <linux/jiffies.h>
#include <linux/posix-timers.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/irq_work.h>
#include <asm/trace.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/nvram.h>
#include <asm/cache.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/smp.h>
#include <asm/vdso_datapage.h>
#include <asm/firmware.h>
#include <asm/cputime.h>
/* powerpc clocksource/clockevent code */
#include <linux/clockchips.h>
#include <linux/timekeeper_internal.h>
static cycle_t rtc_read(struct clocksource *);
static struct clocksource clocksource_rtc = {
.name = "rtc",
.rating = 400,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
.read = rtc_read,
};
static cycle_t timebase_read(struct clocksource *);
static struct clocksource clocksource_timebase = {
.name = "timebase",
.rating = 400,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
.read = timebase_read,
};
#define DECREMENTER_MAX 0x7fffffff
static int decrementer_set_next_event(unsigned long evt,
struct clock_event_device *dev);
static void decrementer_set_mode(enum clock_event_mode mode,
struct clock_event_device *dev);
struct clock_event_device decrementer_clockevent = {
.name = "decrementer",
.rating = 200,
.irq = 0,
.set_next_event = decrementer_set_next_event,
.set_mode = decrementer_set_mode,
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP,
};
EXPORT_SYMBOL(decrementer_clockevent);
DEFINE_PER_CPU(u64, decrementers_next_tb);
static DEFINE_PER_CPU(struct clock_event_device, decrementers);
#define XSEC_PER_SEC (1024*1024)
#ifdef CONFIG_PPC64
#define SCALE_XSEC(xsec, max) (((xsec) * max) / XSEC_PER_SEC)
#else
/* compute ((xsec << 12) * max) >> 32 */
#define SCALE_XSEC(xsec, max) mulhwu((xsec) << 12, max)
#endif
unsigned long tb_ticks_per_jiffy;
unsigned long tb_ticks_per_usec = 100; /* sane default */
EXPORT_SYMBOL(tb_ticks_per_usec);
unsigned long tb_ticks_per_sec;
EXPORT_SYMBOL(tb_ticks_per_sec); /* for cputime_t conversions */
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL_GPL(rtc_lock);
static u64 tb_to_ns_scale __read_mostly;
static unsigned tb_to_ns_shift __read_mostly;
static u64 boot_tb __read_mostly;
extern struct timezone sys_tz;
static long timezone_offset;
unsigned long ppc_proc_freq;
EXPORT_SYMBOL_GPL(ppc_proc_freq);
unsigned long ppc_tb_freq;
EXPORT_SYMBOL_GPL(ppc_tb_freq);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Factors for converting from cputime_t (timebase ticks) to
* jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds).
* These are all stored as 0.64 fixed-point binary fractions.
*/
u64 __cputime_jiffies_factor;
EXPORT_SYMBOL(__cputime_jiffies_factor);
u64 __cputime_usec_factor;
EXPORT_SYMBOL(__cputime_usec_factor);
u64 __cputime_sec_factor;
EXPORT_SYMBOL(__cputime_sec_factor);
u64 __cputime_clockt_factor;
EXPORT_SYMBOL(__cputime_clockt_factor);
DEFINE_PER_CPU(unsigned long, cputime_last_delta);
DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta);
cputime_t cputime_one_jiffy;
void (*dtl_consumer)(struct dtl_entry *, u64);
static void calc_cputime_factors(void)
{
struct div_result res;
div128_by_32(HZ, 0, tb_ticks_per_sec, &res);
__cputime_jiffies_factor = res.result_low;
div128_by_32(1000000, 0, tb_ticks_per_sec, &res);
__cputime_usec_factor = res.result_low;
div128_by_32(1, 0, tb_ticks_per_sec, &res);
__cputime_sec_factor = res.result_low;
div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res);
__cputime_clockt_factor = res.result_low;
}
/*
* Read the SPURR on systems that have it, otherwise the PURR,
* or if that doesn't exist return the timebase value passed in.
*/
static u64 read_spurr(u64 tb)
{
if (cpu_has_feature(CPU_FTR_SPURR))
return mfspr(SPRN_SPURR);
if (cpu_has_feature(CPU_FTR_PURR))
return mfspr(SPRN_PURR);
return tb;
}
#ifdef CONFIG_PPC_SPLPAR
/*
* Scan the dispatch trace log and count up the stolen time.
* Should be called with interrupts disabled.
*/
static u64 scan_dispatch_log(u64 stop_tb)
{
u64 i = local_paca->dtl_ridx;
struct dtl_entry *dtl = local_paca->dtl_curr;
struct dtl_entry *dtl_end = local_paca->dispatch_log_end;
struct lppaca *vpa = local_paca->lppaca_ptr;
u64 tb_delta;
u64 stolen = 0;
u64 dtb;
if (!dtl)
return 0;
if (i == be64_to_cpu(vpa->dtl_idx))
return 0;
while (i < be64_to_cpu(vpa->dtl_idx)) {
dtb = be64_to_cpu(dtl->timebase);
tb_delta = be32_to_cpu(dtl->enqueue_to_dispatch_time) +
be32_to_cpu(dtl->ready_to_enqueue_time);
barrier();
if (i + N_DISPATCH_LOG < be64_to_cpu(vpa->dtl_idx)) {
/* buffer has overflowed */
i = be64_to_cpu(vpa->dtl_idx) - N_DISPATCH_LOG;
dtl = local_paca->dispatch_log + (i % N_DISPATCH_LOG);
continue;
}
if (dtb > stop_tb)
break;
if (dtl_consumer)
dtl_consumer(dtl, i);
stolen += tb_delta;
++i;
++dtl;
if (dtl == dtl_end)
dtl = local_paca->dispatch_log;
}
local_paca->dtl_ridx = i;
local_paca->dtl_curr = dtl;
return stolen;
}
/*
* Accumulate stolen time by scanning the dispatch trace log.
* Called on entry from user mode.
*/
void accumulate_stolen_time(void)
{
u64 sst, ust;
u8 save_soft_enabled = local_paca->soft_enabled;
/* We are called early in the exception entry, before
* soft/hard_enabled are sync'ed to the expected state
* for the exception. We are hard disabled but the PACA
* needs to reflect that so various debug stuff doesn't
* complain
*/
local_paca->soft_enabled = 0;
sst = scan_dispatch_log(local_paca->starttime_user);
ust = scan_dispatch_log(local_paca->starttime);
local_paca->system_time -= sst;
local_paca->user_time -= ust;
local_paca->stolen_time += ust + sst;
local_paca->soft_enabled = save_soft_enabled;
}
static inline u64 calculate_stolen_time(u64 stop_tb)
{
u64 stolen = 0;
if (get_paca()->dtl_ridx != be64_to_cpu(get_lppaca()->dtl_idx)) {
stolen = scan_dispatch_log(stop_tb);
get_paca()->system_time -= stolen;
}
stolen += get_paca()->stolen_time;
get_paca()->stolen_time = 0;
return stolen;
}
#else /* CONFIG_PPC_SPLPAR */
static inline u64 calculate_stolen_time(u64 stop_tb)
{
return 0;
}
#endif /* CONFIG_PPC_SPLPAR */
/*
* Account time for a transition between system, hard irq
* or soft irq state.
*/
static u64 vtime_delta(struct task_struct *tsk,
u64 *sys_scaled, u64 *stolen)
{
u64 now, nowscaled, deltascaled;
u64 udelta, delta, user_scaled;
WARN_ON_ONCE(!irqs_disabled());
now = mftb();
nowscaled = read_spurr(now);
get_paca()->system_time += now - get_paca()->starttime;
get_paca()->starttime = now;
deltascaled = nowscaled - get_paca()->startspurr;
get_paca()->startspurr = nowscaled;
*stolen = calculate_stolen_time(now);
delta = get_paca()->system_time;
get_paca()->system_time = 0;
udelta = get_paca()->user_time - get_paca()->utime_sspurr;
get_paca()->utime_sspurr = get_paca()->user_time;
/*
* Because we don't read the SPURR on every kernel entry/exit,
* deltascaled includes both user and system SPURR ticks.
* Apportion these ticks to system SPURR ticks and user
* SPURR ticks in the same ratio as the system time (delta)
* and user time (udelta) values obtained from the timebase
* over the same interval. The system ticks get accounted here;
* the user ticks get saved up in paca->user_time_scaled to be
* used by account_process_tick.
*/
*sys_scaled = delta;
user_scaled = udelta;
if (deltascaled != delta + udelta) {
if (udelta) {
*sys_scaled = deltascaled * delta / (delta + udelta);
user_scaled = deltascaled - *sys_scaled;
} else {
*sys_scaled = deltascaled;
}
}
get_paca()->user_time_scaled += user_scaled;
return delta;
}
void vtime_account_system(struct task_struct *tsk)
{
u64 delta, sys_scaled, stolen;
delta = vtime_delta(tsk, &sys_scaled, &stolen);
account_system_time(tsk, 0, delta, sys_scaled);
if (stolen)
account_steal_time(stolen);
}
EXPORT_SYMBOL_GPL(vtime_account_system);
void vtime_account_idle(struct task_struct *tsk)
{
u64 delta, sys_scaled, stolen;
delta = vtime_delta(tsk, &sys_scaled, &stolen);
account_idle_time(delta + stolen);
}
/*
* Transfer the user time accumulated in the paca
* by the exception entry and exit code to the generic
* process user time records.
* Must be called with interrupts disabled.
* Assumes that vtime_account_system/idle() has been called
* recently (i.e. since the last entry from usermode) so that
* get_paca()->user_time_scaled is up to date.
*/
void vtime_account_user(struct task_struct *tsk)
{
cputime_t utime, utimescaled;
utime = get_paca()->user_time;
utimescaled = get_paca()->user_time_scaled;
get_paca()->user_time = 0;
get_paca()->user_time_scaled = 0;
get_paca()->utime_sspurr = 0;
account_user_time(tsk, utime, utimescaled);
}
#else /* ! CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
#define calc_cputime_factors()
#endif
void __delay(unsigned long loops)
{
unsigned long start;
int diff;
if (__USE_RTC()) {
start = get_rtcl();
do {
/* the RTCL register wraps at 1000000000 */
diff = get_rtcl() - start;
if (diff < 0)
diff += 1000000000;
} while (diff < loops);
} else {
start = get_tbl();
while (get_tbl() - start < loops)
HMT_low();
HMT_medium();
}
}
EXPORT_SYMBOL(__delay);
void udelay(unsigned long usecs)
{
__delay(tb_ticks_per_usec * usecs);
}
EXPORT_SYMBOL(udelay);
#ifdef CONFIG_SMP
unsigned long profile_pc(struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
if (in_lock_functions(pc))
return regs->link;
return pc;
}
EXPORT_SYMBOL(profile_pc);
#endif
#ifdef CONFIG_IRQ_WORK
/*
* 64-bit uses a byte in the PACA, 32-bit uses a per-cpu variable...
*/
#ifdef CONFIG_PPC64
static inline unsigned long test_irq_work_pending(void)
{
unsigned long x;
asm volatile("lbz %0,%1(13)"
: "=r" (x)
: "i" (offsetof(struct paca_struct, irq_work_pending)));
return x;
}
static inline void set_irq_work_pending_flag(void)
{
asm volatile("stb %0,%1(13)" : :
"r" (1),
"i" (offsetof(struct paca_struct, irq_work_pending)));
}
static inline void clear_irq_work_pending(void)
{
asm volatile("stb %0,%1(13)" : :
"r" (0),
"i" (offsetof(struct paca_struct, irq_work_pending)));
}
#else /* 32-bit */
DEFINE_PER_CPU(u8, irq_work_pending);
#define set_irq_work_pending_flag() __get_cpu_var(irq_work_pending) = 1
#define test_irq_work_pending() __get_cpu_var(irq_work_pending)
#define clear_irq_work_pending() __get_cpu_var(irq_work_pending) = 0
#endif /* 32 vs 64 bit */
void arch_irq_work_raise(void)
{
preempt_disable();
set_irq_work_pending_flag();
set_dec(1);
preempt_enable();
}
#else /* CONFIG_IRQ_WORK */
#define test_irq_work_pending() 0
#define clear_irq_work_pending()
#endif /* CONFIG_IRQ_WORK */
void __timer_interrupt(void)
{
struct pt_regs *regs = get_irq_regs();
u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
struct clock_event_device *evt = &__get_cpu_var(decrementers);
u64 now;
trace_timer_interrupt_entry(regs);
if (test_irq_work_pending()) {
clear_irq_work_pending();
irq_work_run();
}
now = get_tb_or_rtc();
if (now >= *next_tb) {
*next_tb = ~(u64)0;
if (evt->event_handler)
evt->event_handler(evt);
__get_cpu_var(irq_stat).timer_irqs_event++;
} else {
now = *next_tb - now;
if (now <= DECREMENTER_MAX)
set_dec((int)now);
/* We may have raced with new irq work */
if (test_irq_work_pending())
set_dec(1);
__get_cpu_var(irq_stat).timer_irqs_others++;
}
#ifdef CONFIG_PPC64
/* collect purr register values often, for accurate calculations */
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
cu->current_tb = mfspr(SPRN_PURR);
}
#endif
trace_timer_interrupt_exit(regs);
}
/*
* timer_interrupt - gets called when the decrementer overflows,
* with interrupts disabled.
*/
void timer_interrupt(struct pt_regs * regs)
{
struct pt_regs *old_regs;
u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
/* Ensure a positive value is written to the decrementer, or else
* some CPUs will continue to take decrementer exceptions.
*/
set_dec(DECREMENTER_MAX);
/* Some implementations of hotplug will get timer interrupts while
* offline, just ignore these and we also need to set
* decrementers_next_tb as MAX to make sure __check_irq_replay
* don't replay timer interrupt when return, otherwise we'll trap
* here infinitely :(
*/
if (!cpu_online(smp_processor_id())) {
*next_tb = ~(u64)0;
return;
}
/* Conditionally hard-enable interrupts now that the DEC has been
* bumped to its maximum value
*/
may_hard_irq_enable();
#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
if (atomic_read(&ppc_n_lost_interrupts) != 0)
do_IRQ(regs);
#endif
old_regs = set_irq_regs(regs);
irq_enter();
__timer_interrupt();
irq_exit();
set_irq_regs(old_regs);
}
/*
* Hypervisor decrementer interrupts shouldn't occur but are sometimes
* left pending on exit from a KVM guest. We don't need to do anything
* to clear them, as they are edge-triggered.
*/
void hdec_interrupt(struct pt_regs *regs)
{
}
#ifdef CONFIG_SUSPEND
static void generic_suspend_disable_irqs(void)
{
/* Disable the decrementer, so that it doesn't interfere
* with suspending.
*/
set_dec(DECREMENTER_MAX);
local_irq_disable();
set_dec(DECREMENTER_MAX);
}
static void generic_suspend_enable_irqs(void)
{
local_irq_enable();
}
/* Overrides the weak version in kernel/power/main.c */
void arch_suspend_disable_irqs(void)
{
if (ppc_md.suspend_disable_irqs)
ppc_md.suspend_disable_irqs();
generic_suspend_disable_irqs();
}
/* Overrides the weak version in kernel/power/main.c */
void arch_suspend_enable_irqs(void)
{
generic_suspend_enable_irqs();
if (ppc_md.suspend_enable_irqs)
ppc_md.suspend_enable_irqs();
}
#endif
/*
* Scheduler clock - returns current time in nanosec units.
*
* Note: mulhdu(a, b) (multiply high double unsigned) returns
* the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b
* are 64-bit unsigned numbers.
*/
unsigned long long sched_clock(void)
{
if (__USE_RTC())
return get_rtc();
return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift;
}
static int __init get_freq(char *name, int cells, unsigned long *val)
{
struct device_node *cpu;
const __be32 *fp;
int found = 0;
/* The cpu node should have timebase and clock frequency properties */
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu) {
fp = of_get_property(cpu, name, NULL);
if (fp) {
found = 1;
*val = of_read_ulong(fp, cells);
}
of_node_put(cpu);
}
return found;
}
void start_cpu_decrementer(void)
{
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
/* Enable decrementer interrupt */
mtspr(SPRN_TCR, TCR_DIE);
#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */
}
void __init generic_calibrate_decr(void)
{
ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */
if (!get_freq("ibm,extended-timebase-frequency", 2, &ppc_tb_freq) &&
!get_freq("timebase-frequency", 1, &ppc_tb_freq)) {
printk(KERN_ERR "WARNING: Estimating decrementer frequency "
"(not found)\n");
}
ppc_proc_freq = DEFAULT_PROC_FREQ; /* hardcoded default */
if (!get_freq("ibm,extended-clock-frequency", 2, &ppc_proc_freq) &&
!get_freq("clock-frequency", 1, &ppc_proc_freq)) {
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
}
}
int update_persistent_clock(struct timespec now)
{
struct rtc_time tm;
if (!ppc_md.set_rtc_time)
return -ENODEV;
to_tm(now.tv_sec + 1 + timezone_offset, &tm);
tm.tm_year -= 1900;
tm.tm_mon -= 1;
return ppc_md.set_rtc_time(&tm);
}
static void __read_persistent_clock(struct timespec *ts)
{
struct rtc_time tm;
static int first = 1;
ts->tv_nsec = 0;
/* XXX this is a litle fragile but will work okay in the short term */
if (first) {
first = 0;
if (ppc_md.time_init)
timezone_offset = ppc_md.time_init();
/* get_boot_time() isn't guaranteed to be safe to call late */
if (ppc_md.get_boot_time) {
ts->tv_sec = ppc_md.get_boot_time() - timezone_offset;
return;
}
}
if (!ppc_md.get_rtc_time) {
ts->tv_sec = 0;
return;
}
ppc_md.get_rtc_time(&tm);
ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
void read_persistent_clock(struct timespec *ts)
{
__read_persistent_clock(ts);
/* Sanitize it in case real time clock is set below EPOCH */
if (ts->tv_sec < 0) {
ts->tv_sec = 0;
ts->tv_nsec = 0;
}
}
/* clocksource code */
static cycle_t rtc_read(struct clocksource *cs)
{
return (cycle_t)get_rtc();
}
static cycle_t timebase_read(struct clocksource *cs)
{
return (cycle_t)get_tb();
}
void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
struct clocksource *clock, u32 mult)
{
u64 new_tb_to_xs, new_stamp_xsec;
u32 frac_sec;
if (clock != &clocksource_timebase)
return;
/* Make userspace gettimeofday spin until we're done. */
++vdso_data->tb_update_count;
smp_mb();
/* 19342813113834067 ~= 2^(20+64) / 1e9 */
new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift);
new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC;
do_div(new_stamp_xsec, 1000000000);
new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC;
BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC);
/* this is tv_nsec / 1e9 as a 0.32 fraction */
frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32;
/*
* tb_update_count is used to allow the userspace gettimeofday code
* to assure itself that it sees a consistent view of the tb_to_xs and
* stamp_xsec variables. It reads the tb_update_count, then reads
* tb_to_xs and stamp_xsec and then reads tb_update_count again. If
* the two values of tb_update_count match and are even then the
* tb_to_xs and stamp_xsec values are consistent. If not, then it
* loops back and reads them again until this criteria is met.
* We expect the caller to have done the first increment of
* vdso_data->tb_update_count already.
*/
vdso_data->tb_orig_stamp = clock->cycle_last;
vdso_data->stamp_xsec = new_stamp_xsec;
vdso_data->tb_to_xs = new_tb_to_xs;
vdso_data->wtom_clock_sec = wtm->tv_sec;
vdso_data->wtom_clock_nsec = wtm->tv_nsec;
vdso_data->stamp_xtime = *wall_time;
vdso_data->stamp_sec_fraction = frac_sec;
smp_wmb();
++(vdso_data->tb_update_count);
}
void update_vsyscall_tz(void)
{
vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
vdso_data->tz_dsttime = sys_tz.tz_dsttime;
}
static void __init clocksource_init(void)
{
struct clocksource *clock;
if (__USE_RTC())
clock = &clocksource_rtc;
else
clock = &clocksource_timebase;
if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
printk(KERN_ERR "clocksource: %s is already registered\n",
clock->name);
return;
}
printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
clock->name, clock->mult, clock->shift);
}
static int decrementer_set_next_event(unsigned long evt,
struct clock_event_device *dev)
{
__get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt;
set_dec(evt);
/* We may have raced with new irq work */
if (test_irq_work_pending())
set_dec(1);
return 0;
}
static void decrementer_set_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
if (mode != CLOCK_EVT_MODE_ONESHOT)
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
/* Interrupt handler for the timer broadcast IPI */
void tick_broadcast_ipi_handler(void)
{
u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
*next_tb = get_tb_or_rtc();
__timer_interrupt();
}
static void register_decrementer_clockevent(int cpu)
{
struct clock_event_device *dec = &per_cpu(decrementers, cpu);
*dec = decrementer_clockevent;
dec->cpumask = cpumask_of(cpu);
printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
dec->name, dec->mult, dec->shift, cpu);
clockevents_register_device(dec);
}
static void __init init_decrementer_clockevent(void)
{
int cpu = smp_processor_id();
clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4);
decrementer_clockevent.max_delta_ns =
clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
decrementer_clockevent.min_delta_ns =
clockevent_delta2ns(2, &decrementer_clockevent);
register_decrementer_clockevent(cpu);
}
void secondary_cpu_time_init(void)
{
/* Start the decrementer on CPUs that have manual control
* such as BookE
*/
start_cpu_decrementer();
/* FIME: Should make unrelatred change to move snapshot_timebase
* call here ! */
register_decrementer_clockevent(smp_processor_id());
}
/* This function is only called on the boot processor */
void __init time_init(void)
{
struct div_result res;
u64 scale;
unsigned shift;
if (__USE_RTC()) {
/* 601 processor: dec counts down by 128 every 128ns */
ppc_tb_freq = 1000000000;
} else {
/* Normal PowerPC with timebase register */
ppc_md.calibrate_decr();
printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
}
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
tb_ticks_per_sec = ppc_tb_freq;
tb_ticks_per_usec = ppc_tb_freq / 1000000;
calc_cputime_factors();
setup_cputime_one_jiffy();
/*
* Compute scale factor for sched_clock.
* The calibrate_decr() function has set tb_ticks_per_sec,
* which is the timebase frequency.
* We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret
* the 128-bit result as a 64.64 fixed-point number.
* We then shift that number right until it is less than 1.0,
* giving us the scale factor and shift count to use in
* sched_clock().
*/
div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
scale = res.result_low;
for (shift = 0; res.result_high != 0; ++shift) {
scale = (scale >> 1) | (res.result_high << 63);
res.result_high >>= 1;
}
tb_to_ns_scale = scale;
tb_to_ns_shift = shift;
/* Save the current timebase to pretty up CONFIG_PRINTK_TIME */
boot_tb = get_tb_or_rtc();
/* If platform provided a timezone (pmac), we correct the time */
if (timezone_offset) {
sys_tz.tz_minuteswest = -timezone_offset / 60;
sys_tz.tz_dsttime = 0;
}
vdso_data->tb_update_count = 0;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
/* Start the decrementer on CPUs that have manual control
* such as BookE
*/
start_cpu_decrementer();
/* Register the clocksource */
clocksource_init();
init_decrementer_clockevent();
tick_setup_hrtimer_broadcast();
}
#define FEBRUARY 2
#define STARTOFTIME 1970
#define SECDAY 86400L
#define SECYR (SECDAY * 365)
#define leapyear(year) ((year) % 4 == 0 && \
((year) % 100 != 0 || (year) % 400 == 0))
#define days_in_year(a) (leapyear(a) ? 366 : 365)
#define days_in_month(a) (month_days[(a) - 1])
static int month_days[12] = {
31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
};
/*
* This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
*/
void GregorianDay(struct rtc_time * tm)
{
int leapsToDate;
int lastYear;
int day;
int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
lastYear = tm->tm_year - 1;
/*
* Number of leap corrections to apply up to end of last year
*/
leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
/*
* This year is a leap year if it is divisible by 4 except when it is
* divisible by 100 unless it is divisible by 400
*
* e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
*/
day = tm->tm_mon > 2 && leapyear(tm->tm_year);
day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
tm->tm_mday;
tm->tm_wday = day % 7;
}
void to_tm(int tim, struct rtc_time * tm)
{
register int i;
register long hms, day;
day = tim / SECDAY;
hms = tim % SECDAY;
/* Hours, minutes, seconds are easy */
tm->tm_hour = hms / 3600;
tm->tm_min = (hms % 3600) / 60;
tm->tm_sec = (hms % 3600) % 60;
/* Number of years in days */
for (i = STARTOFTIME; day >= days_in_year(i); i++)
day -= days_in_year(i);
tm->tm_year = i;
/* Number of months in days left */
if (leapyear(tm->tm_year))
days_in_month(FEBRUARY) = 29;
for (i = 1; day >= days_in_month(i); i++)
day -= days_in_month(i);
days_in_month(FEBRUARY) = 28;
tm->tm_mon = i;
/* Days are what is left over (+1) from all that. */
tm->tm_mday = day + 1;
/*
* Determine the day of week
*/
GregorianDay(tm);
}
/*
* Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
* result.
*/
void div128_by_32(u64 dividend_high, u64 dividend_low,
unsigned divisor, struct div_result *dr)
{
unsigned long a, b, c, d;
unsigned long w, x, y, z;
u64 ra, rb, rc;
a = dividend_high >> 32;
b = dividend_high & 0xffffffff;
c = dividend_low >> 32;
d = dividend_low & 0xffffffff;
w = a / divisor;
ra = ((u64)(a - (w * divisor)) << 32) + b;
rb = ((u64) do_div(ra, divisor) << 32) + c;
x = ra;
rc = ((u64) do_div(rb, divisor) << 32) + d;
y = rb;
do_div(rc, divisor);
z = rc;
dr->result_high = ((u64)w << 32) + x;
dr->result_low = ((u64)y << 32) + z;
}
/* We don't need to calibrate delay, we use the CPU timebase for that */
void calibrate_delay(void)
{
/* Some generic code (such as spinlock debug) use loops_per_jiffy
* as the number of __delay(1) in a jiffy, so make it so
*/
loops_per_jiffy = tb_ticks_per_jiffy;
}
static int __init rtc_init(void)
{
struct platform_device *pdev;
if (!ppc_md.get_rtc_time)
return -ENODEV;
pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
return PTR_ERR_OR_ZERO(pdev);
}
module_init(rtc_init);